July 2012 - U-Boot

[U-Boot] Pull request u-boot-blackfin.git (sf branch)
by Mike Frysinger 31 Jul '12

31 Jul '12

The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614: Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to b54d1f26ff216ef08307b7652647cc92124c2be1: sf: stmicro: add geometrical info for N25Q256 from Micron (2012-04-08 10:55:55 +0000) ---------------------------------------------------------------- Gerlando Falauto (1): cmd_sf: add size checking to spi flash commands Jérôme Carretero (1): sf: stmicro: add geometrical info for N25Q256 from Micron Mike Frysinger (5): sf: inline data constants sf: unify erase commands sf: eon: drop duplicate id sf: sst: inline duplicate write enable helper funcs sf: unify status register writing (and thus block unlocking) common/cmd_sf.c | 14 ++++++ drivers/mtd/spi/eon.c | 35 ++------------- drivers/mtd/spi/macronix.c | 82 ++-------------------------------- drivers/mtd/spi/spansion.c | 24 ++-------- drivers/mtd/spi/spi_flash.c | 35 +++++++++++++-- drivers/mtd/spi/spi_flash_internal.h | 10 ++++- drivers/mtd/spi/sst.c | 66 +++------------------------ drivers/mtd/spi/stmicro.c | 28 ++++-------- drivers/mtd/spi/winbond.c | 55 ++--------------------- 9 files changed, 85 insertions(+), 264 deletions(-)

2 1

[U-Boot] mx53loco hangs on 2012.07
by Fabio Estevam 31 Jul '12

31 Jul '12

Hi, Just tried 2012.07 on a mx53loco and this is what I got: U-Boot 2012.07 (Jul 31 2012 - 15:21:51) Board: MX53 LOCO I2C: ready DRAM: 1 GiB WARNING: Caches not enabled CPU: Freescale i.MX53 family rev2.0 at 1000 MHz Reset cause: POR MMC: FSL_SDHC: 0, FSL_SDHC: 1 (Hangs here) Have anyone else seen this? I will start debugging it, and any suggestions are welcome. Regards, Fabio Estevam

2 2

[U-Boot] multiple definition of `reloc_dst'
by Sabri Altunbas 31 Jul '12

31 Jul '12

Hello, i get this link error if i build u-boot ............... ............... ............... && sh4-unknown-linux-uclibc-ld -e 0x8FF00000 --defsym reloc_dst=0x8FF00000 -T u-boot.lds --gc-sections -Bstatic -Ttext 0x8FF00000 $UNDEF_SYM arch/sh/cpu/sh4/start.o --start-group BR/BR_libsh4.a api/libapi.o arch/sh/cpu/sh4/libsh4.o arch/sh/lib/libsh.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.a drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o net/libnet.o post/libpost.o board/renesas/sh7785lcr/libsh7785lcr.o --end-group -L /usr/sh-linux/usr/lib/gcc/sh4-unknown-linux-uclibc/4.5.3 -lgcc -Map u-boot.map -o u-boot arch/sh/cpu/sh4/libsh4.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' arch/sh/lib/libsh.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' common/libcommon.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' disk/libdisk.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/net/libnet.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/pci/libpci.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/pcmcia/libpcmcia.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/rtc/librtc.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/serial/libserial.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' fs/fat/libfat.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' lib/libgeneric.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' net/libnet.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' board/renesas/sh7785lcr/libsh7785lcr.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' make: *** [u-boot] Error 1 lmde boot # every hint appreciated

1 0

[U-Boot] multiple definition of `reloc_dst'
by Sabri Altunbas 31 Jul '12

31 Jul '12

Hello, i get this link error if i build u-boot ............... ............... ............... && sh4-unknown-linux-uclibc-ld -e 0x8FF00000 --defsym reloc_dst=0x8FF00000 -T u-boot.lds --gc-sections -Bstatic -Ttext 0x8FF00000 $UNDEF_SYM arch/sh/cpu/sh4/start.o --start-group BR/BR_libsh4.a api/libapi.o arch/sh/cpu/sh4/libsh4.o arch/sh/lib/libsh.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.a drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o net/libnet.o post/libpost.o board/renesas/sh7785lcr/libsh7785lcr.o --end-group -L /usr/sh-linux/usr/lib/gcc/sh4-unknown-linux-uclibc/4.5.3 -lgcc -Map u-boot.map -o u-boot arch/sh/cpu/sh4/libsh4.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' arch/sh/lib/libsh.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' common/libcommon.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' disk/libdisk.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/net/libnet.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/pci/libpci.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/pcmcia/libpcmcia.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/rtc/librtc.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' drivers/serial/libserial.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' fs/fat/libfat.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' lib/libgeneric.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' net/libnet.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' board/renesas/sh7785lcr/libsh7785lcr.o: In function `reloc_dst': (*ABS*+0x8ff00000): multiple definition of `reloc_dst' make: *** [u-boot] Error 1 lmde boot # every hint appreciated

1 0

[U-Boot] [PATCH] tegra: harmony: fix comments for environment config options
by Stephen Warren 31 Jul '12

31 Jul '12

From: Stephen Warren <swarren(a)nvidia.com> The environment is now stored in NAND, so update the comment to say so, rather than saying it's not stored. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- Tom, feel free to just squash this into my patch that added environment support to Harmony if you want. include/configs/harmony.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 85059b9..69857dd 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -68,7 +68,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE TEGRA20_NAND_BASE -/* Environment not stored */ +/* Environment in NAND (which is 512M), aligned to start of last sector */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ -- 1.7.0.4

3 2

Re: [U-Boot] [PATCH] env_nand: align NAND buffers
by Scott Wood 31 Jul '12

31 Jul '12

On 07/31/2012 10:59 AM, Tom Warren wrote: > Scott, > >> -----Original Message----- >> From: Scott Wood [mailto:scottwood@freescale.com] >> Sent: Monday, July 30, 2012 4:01 PM >> To: Stephen Warren >> Cc: Tom Warren; Simon Glass; U-Boot Mailing List; Stephen Warren >> Subject: Re: [PATCH] env_nand: align NAND buffers >> >> On 07/30/2012 12:38 PM, Stephen Warren wrote: >>> From: Stephen Warren <swarren(a)nvidia.com> >>> >>> This allows cache flush/invalidate operations to succeed on the buffers. >>> >>> Signed-off-by: Stephen Warren <swarren(a)nvidia.com> >>> --- >>> common/env_nand.c | 10 +++++----- >>> 1 files changed, 5 insertions(+), 5 deletions(-) >> >> Acked-by: Scott Wood <scottwood(a)freescale.com> >> >> I'm assuming you want it to go with the Tegra patches and not via my tree. > I'm fine with taking the env_nand and cmd_nand changes thru the Tegra tree. Let me know if that's OK with you. It's OK with me. -Scott

1 0

[U-Boot] [PATCH v2 0/2] GPIO driver for BCM2835 SoC
by Vikram Narayanan 31 Jul '12

31 Jul '12

Add GPIO driver for BCM2835 Soc. Also add the driver to the raspberrypi default config Cc: Stephen Warren <swarren(a)wwwdotorg.org> Cc: Albert Aribaud <albert.u.boot(a)aribaud.net> Vikram Narayanan (2): bcm: Add GPIO driver rbpi: Add BCM2835 GPIO driver for raspberry pi Changes from v1: Incorporate comments from Stephen Warren. arch/arm/include/asm/arch-bcm2835/gpio.h | 71 ++++++++++++++++++++++++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio_bcm2835.c | 87 ++++++++++++++++++++++++++++++ include/configs/rpi_b.h | 3 +- 4 files changed, 161 insertions(+), 1 deletions(-) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 drivers/gpio/gpio_bcm2835.c -- 1.7.4.1

2 6

[U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
by Bill 31 Jul '12

31 Jul '12

All, I am working on building the latest u-boot for the imx28evk board. I have done the following steps: 1. git clone git://git.denx.de/u-boot-imx.git 2. setup paths for finding my cross-compiler 1. make mx28evk_config 2. make u-boot.imx 3. It then gets through most of the build process and then fails on this command line: $ tools/mkimage -n -T imximage -e 0x40000100 -d u-boot.bin u-boot.imx after more digging, its looks like the CONFIG_IMX_CONFIG var is not getting filled in (I believe this value should follow the -n parameter) Thanks, Bill

2 11

[U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
by Marek Vasut 31 Jul '12

31 Jul '12

This function converts static number to string in preprocessor. This is useful as it allows higher usage of puts() in favour of printf() Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Wolfgang Denk <wd(a)denx.de> Cc: Mike Frysinger <vapier(a)gentoo.org> --- include/common.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/common.h b/include/common.h index d1dd65a..451917d 100644 --- a/include/common.h +++ b/include/common.h @@ -268,6 +268,13 @@ typedef void (interrupt_handler_t)(void *); const typeof( ((type *)0)->member ) *__mptr = (ptr); \ (type *)( (char *)__mptr - offsetof(type,member) );}) +/** + * __stringify - preprocessor magic to return string from number + * @x: constant number + */ +#define __stringify_1(x...) #x +#define __stringify(x...) __stringify_1(x) + /* * Function Prototypes */ -- 1.7.10.4

3 14

[U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs
by Mike Frysinger 31 Jul '12

31 Jul '12

The BF533-EZKIT boards have this old ST flash. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- drivers/mtd/jedec_flash.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c index 2350f36..b6cb037 100644 --- a/drivers/mtd/jedec_flash.c +++ b/drivers/mtd/jedec_flash.c @@ -30,6 +30,7 @@ /*#define DEBUG*/ #include <common.h> +#include <mtd/cfi_flash.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/byteorder.h> @@ -58,6 +59,9 @@ #define AM29F032B 0x0041 #define AM29F002T 0x00B0 +/* ST - www.st.com */ +#define PSD4256G6V 0x00e9 + /* SST */ #define SST39LF800 0x2781 #define SST39LF160 0x2782 @@ -367,6 +371,22 @@ static const struct amd_flash_info jedec_table[] = { } }, #endif +#ifdef CONFIG_SYS_FLASH_LEGACY_1Mx16 + { + .mfr_id = (u16)STM_MANUFACT, + .dev_id = 0xff00 | PSD4256G6V, + .name = "ST PSD4256G6V", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x0AAA /* x16 */ + }, + .DevSize = SIZE_1MiB, + .CmdSet = CFI_CMDSET_AMD_STANDARD, + .NumEraseRegions = 4, + .regions = { + ERASEINFO(0x10000, 16), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) -- 1.7.9.7

2 3