May 2012 - U-Boot

[U-Boot] Pull request - microblaze
by Michal Simek 18 Sep '12

18 Sep '12

Dear Wolfgang Denk, please pull the following changes. Thanks, Michal The following changes since commit 99ffccbd3e5b7bc715e2eed6ea6d36f4020b56d8: Diana CRACIUN (1): Flush cache after the OS image is loaded into the memory. are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git master Michal Simek (25): net: emaclite: Change driver name and add address net: emaclite: Remove deviceid property net: emaclite: Use calloc instead of malloc net: emaclite: Remove baseaddress from xemaclite net: emaclite: Use dynamic allocation net: emaclite: Setup RX/TX ping pong for every instance net: emaclite: Move RX/TX ping pong initialization to board net: emaclite: Use helper function for io accesses net: emaclite: Fix coding style net: emaclite: Use unsigned long for baseaddr net: emaclite: Use PKTSIZE directly microblaze: Fix in/out_be8/16/32 functions microblaze: Support CTRL+C when tftp is running microblaze: Support flashes on lower addresses microblaze: Initialize jumptable and console microblaze: Fix unaligned.h for endians microblaze: Copy bootfile from variables microblaze: Remove debug saving value microblaze: Setup MB vectors if feature is enable for u-boot microblaze: Save and restore first unused vector microblaze: Clean up reset asm code microblaze: Do not select NFS for platforms without ethernet microblaze: Remove address offset for uart16550 microblaze: Fix no return statement from microblaze-generic board microblaze: Enable FDT/FIT support arch/microblaze/cpu/start.S | 66 ++--- arch/microblaze/include/asm/io.h | 33 ++- arch/microblaze/include/asm/unaligned.h | 17 +-- arch/microblaze/lib/board.c | 17 ++ .../xilinx/microblaze-generic/microblaze-generic.c | 18 +- drivers/net/xilinx_emaclite.c | 285 +++++++++++--------- include/configs/microblaze-generic.h | 9 +- include/netdev.h | 3 +- 8 files changed, 251 insertions(+), 197 deletions(-) -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian

3 18

[U-Boot] [PATCH] mx6qsabresd: Add basic support
by Fabio Estevam 12 Sep '12

12 Sep '12

Add basic support for mx6qsabresd board. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- MAINTAINERS | 1 + board/freescale/mx6qsabresd/Makefile | 37 ++++++ board/freescale/mx6qsabresd/imximage.cfg | 170 +++++++++++++++++++++++++++ board/freescale/mx6qsabresd/mx6qsabresd.c | 111 ++++++++++++++++++ boards.cfg | 1 + include/configs/mx6qsabresd.h | 178 +++++++++++++++++++++++++++++ 6 files changed, 498 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx6qsabresd/Makefile create mode 100644 board/freescale/mx6qsabresd/imximage.cfg create mode 100644 board/freescale/mx6qsabresd/mx6qsabresd.c create mode 100644 include/configs/mx6qsabresd.h diff --git a/MAINTAINERS b/MAINTAINERS index 72f8b64..408167c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -648,6 +648,7 @@ Fabio Estevam <fabio.estevam(a)freescale.com> mx31pdk i.MX31 mx53ard i.MX53 mx53smd i.MX53 + mx6qsabresd i.MX6Q Daniel Gorsulowski <daniel.gorsulowski(a)esd.eu> diff --git a/board/freescale/mx6qsabresd/Makefile b/board/freescale/mx6qsabresd/Makefile new file mode 100644 index 0000000..477bc3a --- /dev/null +++ b/board/freescale/mx6qsabresd/Makefile @@ -0,0 +1,37 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := mx6qsabresd.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx6qsabresd/imximage.cfg b/board/freescale/mx6qsabresd/imximage.cfg new file mode 100644 index 0000000..c389427 --- /dev/null +++ b/board/freescale/mx6qsabresd/imximage.cfg @@ -0,0 +1,170 @@ +# Copyright (C) 2011 Freescale Semiconductor, Inc. +# Jason Liu <r64343(a)freescale.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer docs/README.imxmage for more details about how-to configure +# and create imximage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# image version + +IMAGE_VERSION 2 + +# Boot Device : one of +# spi, sd (the board has no nand neither onenand) + +BOOT_FROM sd + +# Device Configuration Data (DCD) +# +# Each entry must have the format: +# Addr-type Address Value +# +# where: +# Addr-type register length (1,2 or 4 bytes) +# Address absolute address of the register +# value value to be stored in the register +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7975 +DATA 4 0x021b0010 0xFF538E64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005B0E21 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x09408030 +DATA 4 0x021b001c 0x09408038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +# set the default clock gate to save power +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +# enable AXI cache for VDOA/VPU/IPU +DATA 4 0x020e0010 0xF00000FF +# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c new file mode 100644 index 0000000..7df2823 --- /dev/null +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam(a)freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx6x_pins.h> +#include <asm/arch/iomux-v3.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <mmc.h> +#include <fsl_esdhc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +iomux_v3_cfg_t uart1_pads[] = { + MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t usdhc3_pads[] = { + MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC3_BASE_ADDR, 1}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + gpio_direction_input(32); /*GPIO2_0*/ + return !gpio_get_value(32); +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} +#endif + +u32 get_board_rev(void) +{ + return 0x63000 ; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: MX6Q-SabreSD\n"); + + return 0; +} diff --git a/boards.cfg b/boards.cfg index c6090ba..d9946ca 100644 --- a/boards.cfg +++ b/boards.cfg @@ -192,6 +192,7 @@ mx53smd arm armv7 mx53smd freesca vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/mx6qsabrelite/imximage.cfg +mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/mx6qsabresd/imximage.cfg cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h new file mode 100644 index 0000000..984057c --- /dev/null +++ b/include/configs/mx6qsabresd.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6Q SabreSD board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX6Q +#define CONFIG_SYS_MX6_HCLK 24000000 +#define CONFIG_SYS_MX6_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_MACH_TYPE 3980 + +#include <asm/arch/imx-regs.h> + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "dhcp ${uimage}; bootm\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "MX6QSABRESD U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE (128 * 1024) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +#define CONFIG_ENV_IS_IN_MMC + +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + +#define CONFIG_OF_LIBFDT + +#define CONFIG_SYS_DCACHE_OFF + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ -- 1.7.1

9 27

[U-Boot] msm7630 mainline request
by Srikanth Reddy 06 Sep '12

06 Sep '12

Hi, The patch for msm7630 was released to the u-boot community on 16-Feb-2-2012 can this be mainlined in v2012.07 release.The Patches contain the following support * low speed uart for msm7630 * inter processor communication * qc_mmc microcontroller * msm7630 soc * msm7630 surf board Thanks & Regards, Srikanth R V

2 1

[U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET.
by Aldo Brett Cedillo Martinez 06 Sep '12

06 Sep '12

Configures GPMC, adds macros to enable net commands, and adds proper initialization to board_eth_init function. I have a similar patch to enable ethernet in zoom3 after initial support patch. Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo(a)ti.com> --- board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ include/configs/omap3_zoom2.h | 10 +++++++++- 2 files changed, 30 insertions(+), 1 deletions(-) diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index e9f6625..54d3e9f 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { 0x1D0904C4, 0 }; +/* Ethernet GPMC configuration */ +static u32 gpmc_eth[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, 0 +}; + /* Used to track the revision of the board */ static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; @@ -130,6 +140,12 @@ int board_init (void) enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); +#ifdef CONFIG_CMD_NET + gpmc_config = gpmc_eth; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7], + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); +#endif /* (CONFIG_CMD_NET) */ + /* board id for Linux */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; /* boot param addr */ @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_LAN91C96 rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); #endif + +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; } #endif diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index eef95fe..c66d571 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -154,7 +154,7 @@ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH @@ -165,6 +165,14 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 +#endif /* (CONFIG_CMD_NET) */ + /* * TWL4030 */ -- 1.6.3.3

3 3

[U-Boot] [PATCH] eb_cpux9k2: add ram target configuration
by Jens Scharsig 04 Sep '12

04 Sep '12

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config) Signed-off-by: Jens Scharsig <js_at_ng(a)scharsoft.de> --- boards.cfg | 3 ++- include/configs/eb_cpux9k2.h | 5 +++++ 2 files changed, 7 insertions(+), 1 deletions(-) diff --git a/boards.cfg b/boards.cfg index 3cf75c3..efca4fc 100644 --- a/boards.cfg +++ b/boards.cfg @@ -54,7 +54,8 @@ integratorcp_cm920t arm arm920t integrator armltd a320evb arm arm920t - faraday a320 at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT -eb_cpux9k2 arm arm920t - BuS at91 +eb_cpux9k2 arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2 +eb_cpux9k2_ram arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2:RAMBOOT cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT mx1ads arm arm920t - - imx diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index eb05e2a..d7b6b57 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -44,7 +44,12 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ +#ifndef CONFIG_RAMBOOT #define CONFIG_SYS_TEXT_BASE 0x00000000 +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x21f00000 +#endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -- 1.7.7

4 5

[U-Boot] [PATCH] eb_cpux9k2: fix chip select
by Jens Scharsig 03 Sep '12

03 Sep '12

* fix chip select initialization for frame buffer, this will be increase frame buffer access speed Signed-off-by: Jens Scharsig <js_at_ng(a)scharsoft.de> --- board/BuS/eb_cpux9k2/cpux9k2.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 54f9b64..15a31be 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -269,9 +269,9 @@ int drv_video_init(void) display_height = 256; printf("%ld x %ld pixel matrix\n", display_width, display_height); - /* RWH = 7 | RWS =7 | TDF = 15 | NWS = 0x7F */ - csr = AT91_SMC_CSR_RWHOLD(7) | AT91_SMC_CSR_RWSETUP(7) | - AT91_SMC_CSR_TDF(15) | AT91_SMC_CSR_NWS(127) | + /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */ + csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) | + AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) | AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 | AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN; writel(csr, &mc->smc.csr[2]); -- 1.7.7

3 2

[U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5
by Jaehoon Chung 03 Sep '12

03 Sep '12

eMMC card is introduced the eMMC4.5. But now eMMC card is checked up to eMMC4.0. This patch is supported until eMMC4.5 Signed-off-by: Jaehoon Chung <jh80.chung(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- common/cmd_mmc.c | 5 ++++- drivers/mmc/mmc.c | 25 +++++++++++++++++++++++++ include/mmc.h | 8 ++++++++ 3 files changed, 37 insertions(+), 1 deletions(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 8f13c22..ff150ca 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -106,7 +106,10 @@ static void print_mmcinfo(struct mmc *mmc) printf("Rd Block Len: %d\n", mmc->read_bl_len); printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC", - (mmc->version >> 4) & 0xf, mmc->version & 0xf); + (mmc->version >> 4) & 0xf, + (mmc->version & 0xf) == EXT_CSD_REV_1_5 ? + 41 :((mmc->version & 0xf) > EXT_CSD_REV_1_5 ? + (mmc->version & 0xf) - 1 : (mmc->version & 0xf))); printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No"); puts("Capacity: "); diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 49c3349..e035012 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -651,6 +651,31 @@ int mmc_change_freq(struct mmc *mmc) if (err) return err; + switch (ext_csd[EXT_CSD_REV]) { + case EXT_CSD_REV_1_0: + mmc->version |= EXT_CSD_REV_1_0; + break; + case EXT_CSD_REV_1_1: + mmc->version |= EXT_CSD_REV_1_1; + break; + case EXT_CSD_REV_1_2: + mmc->version |= EXT_CSD_REV_1_2; + break; + case EXT_CSD_REV_1_3: + mmc->version |= EXT_CSD_REV_1_3; + break; + case EXT_CSD_REV_1_5: + mmc->version |= EXT_CSD_REV_1_5; + break; + case EXT_CSD_REV_1_6: + mmc->version |= EXT_CSD_REV_1_6; + break; + case EXT_CSD_REV_1_4: + default: + printf("Unknown revision - %x\n", ext_csd[EXT_CSD_REV]); + return 0; + } + /* No high-speed support */ if (!ext_csd[EXT_CSD_HS_TIMING]) return 0; diff --git a/include/mmc.h b/include/mmc.h index 30c2375..726da99 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -157,6 +157,14 @@ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_REV_1_0 0 +#define EXT_CSD_REV_1_1 1 +#define EXT_CSD_REV_1_2 2 +#define EXT_CSD_REV_1_3 3 +#define EXT_CSD_REV_1_4 4 +#define EXT_CSD_REV_1_5 5 +#define EXT_CSD_REV_1_6 6 + /* * EXT_CSD field definitions */ -- 1.7.4.1

3 3

[U-Boot] [PATCH] mmc: Remove unused item flags in struct mmc_cmd
by Kaspter Ju 02 Sep '12

02 Sep '12

Signed-off-by: Kaspter Ju <nigh0st3018(a)gmail.com> --- drivers/mmc/mmc.c | 28 ---------------------------- include/mmc.h | 1 - 2 files changed, 29 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index aebe578..fdfa920 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -151,7 +151,6 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) printf("CMD_SEND:%d\n", cmd->cmdidx); printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); - printf("\t\tFLAG\t\t\t %d\n", cmd->flags); ret = mmc->send_cmd(mmc, cmd, data); switch (cmd->resp_type) { case MMC_RSP_NONE: @@ -213,7 +212,6 @@ int mmc_send_status(struct mmc *mmc, int timeout) cmd.resp_type = MMC_RSP_R1; if (!mmc_host_is_spi(mmc)) cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; do { err = mmc_send_cmd(mmc, &cmd, NULL); @@ -253,7 +251,6 @@ int mmc_set_blocklen(struct mmc *mmc, int len) cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = len; - cmd.flags = 0; return mmc_send_cmd(mmc, &cmd, NULL); } @@ -299,7 +296,6 @@ static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) cmd.cmdidx = start_cmd; cmd.cmdarg = start; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -381,7 +377,6 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) cmd.cmdarg = start * mmc->write_bl_len; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; data.src = src; data.blocks = blkcnt; @@ -400,7 +395,6 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; - cmd.flags = 0; if (mmc_send_cmd(mmc, &cmd, NULL)) { printf("mmc fail to send stop cmd\n"); return 0; @@ -454,7 +448,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) cmd.cmdarg = start * mmc->read_bl_len; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; data.dest = dst; data.blocks = blkcnt; @@ -468,7 +461,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; - cmd.flags = 0; if (mmc_send_cmd(mmc, &cmd, NULL)) { printf("mmc fail to send stop cmd\n"); return 0; @@ -520,7 +512,6 @@ int mmc_go_idle(struct mmc* mmc) cmd.cmdidx = MMC_CMD_GO_IDLE_STATE; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_NONE; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -543,7 +534,6 @@ sd_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -584,7 +574,6 @@ sd_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_READ_OCR; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -613,7 +602,6 @@ int mmc_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SEND_OP_COND; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -633,8 +621,6 @@ int mmc_send_op_cond(struct mmc *mmc) if (mmc->host_caps & MMC_MODE_HC) cmd.cmdarg |= OCR_HCS; - cmd.flags = 0; - err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -650,7 +636,6 @@ int mmc_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_READ_OCR; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -678,7 +663,6 @@ int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) cmd.cmdidx = MMC_CMD_SEND_EXT_CSD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; data.dest = ext_csd; data.blocks = 1; @@ -702,7 +686,6 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | (index << 16) | (value << 8); - cmd.flags = 0; ret = mmc_send_cmd(mmc, &cmd, NULL); @@ -795,7 +778,6 @@ int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) cmd.cmdarg = (mode << 31) | 0xffffff; cmd.cmdarg &= ~(0xf << (group * 4)); cmd.cmdarg |= value << (group * 4); - cmd.flags = 0; data.dest = (char *)resp; data.blocksize = 64; @@ -824,7 +806,6 @@ int sd_change_freq(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -834,7 +815,6 @@ int sd_change_freq(struct mmc *mmc) cmd.cmdidx = SD_CMD_APP_SEND_SCR; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; timeout = 3; @@ -987,7 +967,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 1; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1000,7 +979,6 @@ int mmc_startup(struct mmc *mmc) MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ cmd.resp_type = MMC_RSP_R2; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1018,7 +996,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; cmd.cmdarg = mmc->rca << 16; cmd.resp_type = MMC_RSP_R6; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1033,7 +1010,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SEND_CSD; cmd.resp_type = MMC_RSP_R2; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1110,7 +1086,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SELECT_CARD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1177,7 +1152,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1186,7 +1160,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 2; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) return err; @@ -1267,7 +1240,6 @@ int mmc_send_if_cond(struct mmc *mmc) /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa; cmd.resp_type = MMC_RSP_R7; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); diff --git a/include/mmc.h b/include/mmc.h index 2305986..23e40a5 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -213,7 +213,6 @@ struct mmc_cmd { uint resp_type; uint cmdarg; uint response[4]; - uint flags; }; struct mmc_data { -- 1.7.9.5

2 1

[U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
by Mike Frysinger 27 Aug '12

27 Aug '12

All arches init these variables the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- arch/arm/lib/board.c | 11 ----------- arch/avr32/lib/board.c | 5 ----- arch/blackfin/lib/board.c | 9 +-------- arch/m68k/lib/board.c | 14 -------------- arch/microblaze/lib/board.c | 7 ------- arch/mips/lib/board.c | 11 ----------- arch/nds32/lib/board.c | 9 --------- arch/nios2/lib/board.c | 2 -- arch/powerpc/lib/board.c | 11 ----------- arch/sandbox/lib/board.c | 3 --- arch/sh/lib/board.c | 22 ++-------------------- arch/sparc/lib/board.c | 7 ------- arch/x86/lib/board.c | 12 ------------ net/eth.c | 12 ++++++++++++ 14 files changed, 15 insertions(+), 120 deletions(-) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 3d78274..2c4276b 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -536,9 +536,6 @@ void board_init_r(gd_t *id, ulong dest_addr) arm_pci_init(); #endif - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - stdio_init(); /* get the devices list going. */ jumptable_init(); @@ -576,14 +573,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - { - char *s = getenv("bootfile"); - - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); - } -#endif #ifdef CONFIG_BOARD_LATE_INIT board_late_init(); diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 63fe297..4bc3c8a 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -304,8 +304,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) /* initialize environment */ env_relocate(); - bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - stdio_init(); jumptable_init(); console_init_r(); @@ -317,9 +315,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) bb_miiphy_init(); #endif #if defined(CONFIG_CMD_NET) - s = getenv("bootfile"); - if (s) - copy_filename(BootFile, s, sizeof(BootFile)); puts("Net: "); eth_initialize(gd->bd); #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index e3ee4cd..4310fef 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -294,15 +294,8 @@ static void board_net_init_r(bd_t *bd) bb_miiphy_init(); #endif #ifdef CONFIG_CMD_NET - char *s; - - if ((s = getenv("bootfile")) != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); - - bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - printf("Net: "); - eth_initialize(gd->bd); + eth_initialize(bd); #endif } diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 259b71c..b3dca77 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -507,15 +507,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* relocate environment function pointers etc. */ env_relocate (); - /* - * Fill in missing fields of bd_info. - * We do this here, where we have "normal" access to the - * environment; we used to do this still running from ROM, - * where had to use getenv_f(), which can be pretty slow when - * the environment is in EEPROM. - */ - bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - WATCHDOG_RESET (); #if defined(CONFIG_PCI) @@ -568,11 +559,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - if ((s = getenv ("bootfile")) != NULL) { - copy_filename (BootFile, s, sizeof (BootFile)); - } -#endif WATCHDOG_RESET (); diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 9828b76..f3679d5 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -176,19 +176,12 @@ void board_init (void) load_addr = getenv_ulong("loadaddr", 16, load_addr); #if defined(CONFIG_CMD_NET) - /* IP Address */ - bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - printf("Net: "); eth_initialize(gd->bd); uchar enetaddr[6]; eth_getenv_enetaddr("ethaddr", enetaddr); printf("MAC: %pM\n", enetaddr); - - s = getenv("bootfile"); - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); #endif /* main_loop */ diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index d998f0e..6b36a98 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -316,9 +316,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* relocate environment function pointers etc. */ env_relocate(); - /* IP Address */ - bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - #if defined(CONFIG_PCI) /* * Do pci configuration @@ -338,14 +335,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - { - char *s = getenv("bootfile"); - - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); - } -#endif #ifdef CONFIG_CMD_SPI puts("SPI: "); diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 66e4537..446e0fd 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -368,9 +368,6 @@ void board_init_r(gd_t *id, ulong dest_addr) nds32_pci_init(); #endif - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - stdio_init(); /* get the devices list going. */ jumptable_init(); @@ -401,12 +398,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - s = getenv("bootfile"); - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); -#endif - #ifdef BOARD_LATE_INIT board_late_init(); #endif diff --git a/arch/nios2/lib/board.c b/arch/nios2/lib/board.c index 65de26e..ca8a3e5 100644 --- a/arch/nios2/lib/board.c +++ b/arch/nios2/lib/board.c @@ -143,8 +143,6 @@ void board_init (void) WATCHDOG_RESET (); env_relocate(); - bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - WATCHDOG_RESET (); stdio_init(); jumptable_init(); diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index ff5888e..931b098 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -877,9 +877,6 @@ void board_init_r(gd_t *id, ulong dest_addr) #endif #endif /* CONFIG_CMD_NET */ - /* IP Address */ - bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - WATCHDOG_RESET(); #if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) @@ -935,14 +932,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - { - char *s = getenv("bootfile"); - - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); - } -#endif WATCHDOG_RESET(); diff --git a/arch/sandbox/lib/board.c b/arch/sandbox/lib/board.c index b7997e9..a71b1ba 100644 --- a/arch/sandbox/lib/board.c +++ b/arch/sandbox/lib/board.c @@ -226,9 +226,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* initialize environment */ env_relocate(); - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - stdio_init(); /* get the devices list going. */ jumptable_init(); diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index d9c0c22..e1a5739 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -99,14 +99,6 @@ static int sh_mem_env_init(void) return 0; } -#if defined(CONFIG_CMD_NET) -static int sh_net_init(void) -{ - gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr"); - return 0; -} -#endif - #if defined(CONFIG_CMD_MMC) static int sh_mmc_init(void) { @@ -144,9 +136,6 @@ init_fnc_t *init_sequence[] = #ifdef CONFIG_BOARD_LATE_INIT board_late_init, #endif -#if defined(CONFIG_CMD_NET) - sh_net_init, /* SH specific eth init */ -#endif #if defined(CONFIG_CMD_MMC) sh_mmc_init, #endif @@ -200,15 +189,8 @@ void sh_generic_init(void) bb_miiphy_init(); #endif #if defined(CONFIG_CMD_NET) - { - char *s; - puts("Net: "); - eth_initialize(gd->bd); - - s = getenv("bootfile"); - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); - } + puts("Net: "); + eth_initialize(gd->bd); #endif /* CONFIG_CMD_NET */ while (1) { diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 519a4fb..a36f165 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -333,8 +333,6 @@ void board_init_f(ulong bootflag) mac_read_from_eeprom(); #endif - /* IP Address */ - bd->bi_ip_addr = getenv_IPaddr("ipaddr"); #if defined(CONFIG_PCI) /* * Do pci configuration @@ -359,11 +357,6 @@ void board_init_f(ulong bootflag) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - if ((s = getenv("bootfile")) != NULL) { - copy_filename(BootFile, s, sizeof(BootFile)); - } -#endif /* CONFIG_CMD_NET */ WATCHDOG_RESET(); diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c index d742fec..595b3c9 100644 --- a/arch/x86/lib/board.c +++ b/arch/x86/lib/board.c @@ -321,12 +321,6 @@ void board_init_r(gd_t *id, ulong dest_addr) env_relocate(); show_boot_progress(0x26); - -#ifdef CONFIG_CMD_NET - /* IP Address */ - bd_data.bi_ip_addr = getenv_IPaddr("ipaddr"); -#endif - #if defined(CONFIG_PCI) /* * Do pci configuration @@ -373,12 +367,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#if defined(CONFIG_CMD_NET) - s = getenv("bootfile"); - - if (s != NULL) - copy_filename(BootFile, s, sizeof(BootFile)); -#endif WATCHDOG_RESET(); diff --git a/net/eth.c b/net/eth.c index f3a55ba..c5daee1 100644 --- a/net/eth.c +++ b/net/eth.c @@ -224,6 +224,16 @@ int eth_register(struct eth_device *dev) return 0; } +static void eth_env_init(bd_t *bis) +{ + const char *s; + + if ((s = getenv("bootfile")) != NULL) + copy_filename(BootFile, s, sizeof(BootFile)); + + bis->bi_ip_addr = getenv_IPaddr("ipaddr"); +} + int eth_initialize(bd_t *bis) { int num_devices = 0; @@ -239,6 +249,8 @@ int eth_initialize(bd_t *bis) phy_init(); #endif + eth_env_init(bis); + /* * If board-specific initialization exists, call it. * If not, call a CPU-specific one -- 1.7.8.3

5 20

[U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions
by Prabhakar Kushwaha 25 Aug '12

25 Aug '12

Prototype declaration of I/O operation functions are not correct. as both 'extern' and function definition are at same place. Chage protoype declaration as static. Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> --- Based upon git://git.denx.de/u-boot.git branch master arch/powerpc/include/asm/io.h | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 0a71bb9..9597583 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -162,7 +162,7 @@ static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) * is actually performed (i.e. the data has come back) before we start * executing any following instructions. */ -extern inline u8 in_8(const volatile unsigned char __iomem *addr) +static inline u8 in_8(const volatile unsigned char __iomem *addr) { u8 ret; @@ -173,7 +173,7 @@ extern inline u8 in_8(const volatile unsigned char __iomem *addr) return ret; } -extern inline void out_8(volatile unsigned char __iomem *addr, u8 val) +static inline void out_8(volatile unsigned char __iomem *addr, u8 val) { __asm__ __volatile__("sync;\n" "stb%U0%X0 %1,%0;\n" @@ -181,7 +181,7 @@ extern inline void out_8(volatile unsigned char __iomem *addr, u8 val) : "r" (val)); } -extern inline u16 in_le16(const volatile unsigned short __iomem *addr) +static inline u16 in_le16(const volatile unsigned short __iomem *addr) { u16 ret; @@ -192,7 +192,7 @@ extern inline u16 in_le16(const volatile unsigned short __iomem *addr) return ret; } -extern inline u16 in_be16(const volatile unsigned short __iomem *addr) +static inline u16 in_be16(const volatile unsigned short __iomem *addr) { u16 ret; @@ -202,18 +202,18 @@ extern inline u16 in_be16(const volatile unsigned short __iomem *addr) return ret; } -extern inline void out_le16(volatile unsigned short __iomem *addr, u16 val) +static inline void out_le16(volatile unsigned short __iomem *addr, u16 val) { __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); } -extern inline void out_be16(volatile unsigned short __iomem *addr, u16 val) +static inline void out_be16(volatile unsigned short __iomem *addr, u16 val) { __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } -extern inline u32 in_le32(const volatile unsigned __iomem *addr) +static inline u32 in_le32(const volatile unsigned __iomem *addr) { u32 ret; @@ -224,7 +224,7 @@ extern inline u32 in_le32(const volatile unsigned __iomem *addr) return ret; } -extern inline u32 in_be32(const volatile unsigned __iomem *addr) +static inline u32 in_be32(const volatile unsigned __iomem *addr) { u32 ret; @@ -234,13 +234,13 @@ extern inline u32 in_be32(const volatile unsigned __iomem *addr) return ret; } -extern inline void out_le32(volatile unsigned __iomem *addr, u32 val) +static inline void out_le32(volatile unsigned __iomem *addr, u32 val) { __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); } -extern inline void out_be32(volatile unsigned __iomem *addr, u32 val) +static inline void out_be32(volatile unsigned __iomem *addr, u32 val) { __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } -- 1.7.5.4

5 8