April 2011 - U-Boot

[U-Boot] [PATCH] musb: process control messages after roothub accepted it
by Mike Frysinger 12 May '11

12 May '11

From: Cliff Cai <cliff.cai(a)analog.com> When dealing with non-multipoint devices, if the software root hub code accepted the message, then we still need to process it normally. So only return quickly when the root hub skipped the message or is otherwise in an error state. Signed-off-by: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- drivers/usb/musb/musb_hcd.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index 8b0c61d..974bb31 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -853,8 +853,11 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, #ifdef MUSB_NO_MULTIPOINT /* Control message is for the HUB? */ - if (devnum == rh_devnum) - return musb_submit_rh_msg(dev, pipe, buffer, len, setup); + if (devnum == rh_devnum) { + int stat = musb_submit_rh_msg(dev, pipe, buffer, len, setup); + if (stat) + return stat; + } #endif /* select control endpoint */ -- 1.7.5.rc1

2 1

[U-Boot] [PATCH 00/30] Keymile boards mainlining, part 2 (resend)
by Valentin Longchamp 12 May '11

12 May '11

This series is the second effort of merging the Keymile boards support back into mainline. Most of the patches are only keymile relevant and should only affect our boards. There are also patches for the i2c deblocking support and cramfs for ARM. The whole series is based on current denx-master with the our first patch series posted by Heiko that was reviewed previous weeks and should still be merged during the current merge window: http://lists.denx.de/pipermail/u-boot/2011-April/089530.html Heiko Schocher (5): lib, vsprintf: introduce strict_strtoul arm/km: add CRAMFS support for keymile boards cramfs: make cramfs usable without a NOR flash i2c, soft_i2c: deblock bus if switching to another i2c bus arm, powerpc, keymile boards: move keymile specific header in subdir Holger Brunck (18): km/common: remove hdlc_enet implementation powerpc/km82xx: cleanup coding style for mgcoge.c powerpc/km82xx: rename mgcoge files to km82xx powerpc/km82xx: move SDRAM config to board config powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support poweprc/km82xx: add board specific environment variable arm/km: add addbootcount environment variable arm/km: remove last_stage_init and unneeded printouts arm/km: add second serial interface for kirkwood common/hush: make get_local_var visible for other users km/common: implement setboardid as a command km/common: add pnvramsize to default environment km/common: fix coding style issues in generic header km/common: simplify default environment arm/km: rename mgcoge2un to mgcoge3un arm/km: change default settings for egiga on mgcoge3un arm/km: update mgcoge3un board support Huber, Andreas (1): powerpc/km82xx: add DIP switch detection Stefan Bigler (1): i2c: add i2c deblock sequence before and after every mux config Thomas Herzmann (2): km/common: fix initial_boot_bank for bootpackages km/common: replace env var checkboardidlist by function Valentin Longchamp (3): arm/km: add mkimage config file for uart download arm/km: add BootROM config files for memphis SDRAM arm/km: disable ls (through jffs2 support) MAINTAINERS | 4 +- board/keymile/common/common.c | 156 ++++++- board/keymile/common/common.h | 84 +++- board/keymile/common/keymile_hdlc_enet.c | 620 ------------------------ board/keymile/{mgcoge => km82xx}/Makefile | 3 +- board/keymile/km82xx/km82xx.c | 373 ++++++++++++++ board/keymile/km_arm/km_arm.c | 93 +++- board/keymile/km_arm/kwbimage-memphis-uart.cfg | 197 ++++++++ board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++ board/keymile/km_arm/kwbimage-uart.cfg | 179 +++++++ board/keymile/mgcoge/mgcoge.c | 333 ------------- board/keymile/mgcoge/mgcoge_hdlc_enet.c | 276 ----------- board/keymile/scripts/README | 25 + board/keymile/scripts/debug-arm-env.txt | 2 + board/keymile/scripts/debug-common-env.txt | 9 + board/keymile/scripts/debug-ppc-env.txt | 2 + boards.cfg | 6 +- common/cmd_cramfs.c | 12 +- common/cmd_i2c.c | 12 + common/hush.c | 3 +- drivers/i2c/soft_i2c.c | 1 + drivers/net/mvgbe.h | 2 + fs/cramfs/cramfs.c | 4 + include/_exports.h | 1 + include/common.h | 1 + include/configs/{ => km}/keymile-common.h | 175 +------ include/configs/{ => km}/km-powerpc.h | 12 +- include/configs/{ => km}/km82xx-common.h | 29 +- include/configs/{ => km}/km8321-common.h | 0 include/configs/{ => km}/km83xx-common.h | 0 include/configs/{ => km}/km_arm.h | 25 +- include/configs/kmeter1.h | 2 +- include/configs/kmsupx5.h | 2 +- include/configs/mgcoge.h | 35 ++- include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 57 ++- include/configs/{mgcoge2un.h => mgcoge3un.h} | 37 ++- include/configs/suen3.h | 2 +- include/configs/suen8.h | 2 +- include/configs/suvd3.h | 2 +- include/configs/tuda1.h | 2 +- include/configs/tuxa1.h | 2 +- include/exports.h | 1 + include/hush.h | 1 + include/i2c.h | 2 - lib/vsprintf.c | 47 ++ 45 files changed, 1531 insertions(+), 1499 deletions(-) delete mode 100644 board/keymile/common/keymile_hdlc_enet.c rename board/keymile/{mgcoge => km82xx}/Makefile (94%) create mode 100644 board/keymile/km82xx/km82xx.c create mode 100644 board/keymile/km_arm/kwbimage-memphis-uart.cfg create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg create mode 100644 board/keymile/km_arm/kwbimage-uart.cfg delete mode 100644 board/keymile/mgcoge/mgcoge.c delete mode 100644 board/keymile/mgcoge/mgcoge_hdlc_enet.c create mode 100644 board/keymile/scripts/README create mode 100644 board/keymile/scripts/debug-arm-env.txt create mode 100644 board/keymile/scripts/debug-common-env.txt create mode 100644 board/keymile/scripts/debug-ppc-env.txt rename include/configs/{ => km}/keymile-common.h (63%) rename include/configs/{ => km}/km-powerpc.h (91%) rename include/configs/{ => km}/km82xx-common.h (93%) rename include/configs/{ => km}/km8321-common.h (100%) rename include/configs/{ => km}/km83xx-common.h (100%) rename include/configs/{ => km}/km_arm.h (93%) rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (57%) rename include/configs/{mgcoge2un.h => mgcoge3un.h} (65%)

4 63

[U-Boot] [PATCH] part_dos: allocate sector buffer dynamically
by Sergei Shtylyov 12 May '11

12 May '11

Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it tries to read the MBR into 512-byte buffer situated on stack. Instead allocate this buffer dynamically to be safe with any large sector size. Signed-off-by: Sergei Shtylyov <sshtylyov(a)ru.mvista.com> --- The same change is probably needed for disk/part_amiga.c but I'm not really sure if Amiga supports USB... :-) disk/part_dos.c | 59 +++++++++++++++++++++++++++++++++++++++----------------- disk/part_dos.h | 7 ------ 2 files changed, 42 insertions(+), 24 deletions(-) Index: u-boot/disk/part_dos.c =================================================================== --- u-boot.orig/disk/part_dos.c +++ u-boot/disk/part_dos.c @@ -32,6 +32,7 @@ #include <common.h> #include <command.h> +#include <exports.h> #include <ide.h> #include "part_dos.h" @@ -87,14 +88,20 @@ static int test_block_type(unsigned char int test_part_dos (block_dev_desc_t *dev_desc) { - unsigned char buffer[DEFAULT_SECTOR_SIZE]; + unsigned char *buffer; + + buffer = malloc(dev_desc->blksz); + if (!buffer) + return -1; if ((dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1) || (buffer[DOS_PART_MAGIC_OFFSET + 0] != 0x55) || (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) { - return (-1); + free(buffer); + return -1; } - return (0); + free(buffer); + return 0; } /* Print a partition that is relative to its Extended partition table @@ -102,26 +109,32 @@ int test_part_dos (block_dev_desc_t *dev static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative, int part_num) { - unsigned char buffer[DEFAULT_SECTOR_SIZE]; + unsigned char *buffer; dos_partition_t *pt; int i; + buffer = malloc(dev_desc->blksz); + if (!buffer) { + printf ("** Can't allocate buffer **\n"); + return; + } + if (dev_desc->block_read(dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) { printf ("** Can't read partition table on %d:%d **\n", dev_desc->dev, ext_part_sector); - return; + goto exit; } i=test_block_type(buffer); if(i==-1) { printf ("bad MBR sector signature 0x%02x%02x\n", buffer[DOS_PART_MAGIC_OFFSET], buffer[DOS_PART_MAGIC_OFFSET + 1]); - return; + goto exit; } if(i==DOS_PBR) { printf (" 1\t\t 0\t%10ld\t%2x\n", dev_desc->lba, buffer[DOS_PBR_MEDIA_TYPE_OFFSET]); - return; + goto exit; } /* Print all primary/logical partitions */ pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET); @@ -156,7 +169,8 @@ static void print_partition_extended (bl } } - return; +exit: + free(buffer); } @@ -166,21 +180,27 @@ static int get_partition_info_extended ( int relative, int part_num, int which_part, disk_partition_t *info) { - unsigned char buffer[DEFAULT_SECTOR_SIZE]; + unsigned char *buffer; dos_partition_t *pt; - int i; + int i, result = -1; + + buffer = malloc(dev_desc->blksz); + if (!buffer) { + printf ("** Can't allocate buffer **\n"); + return -1; + } if (dev_desc->block_read (dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) { printf ("** Can't read partition table on %d:%d **\n", dev_desc->dev, ext_part_sector); - return -1; + goto exit; } if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { printf ("bad MBR sector signature 0x%02x%02x\n", buffer[DOS_PART_MAGIC_OFFSET], buffer[DOS_PART_MAGIC_OFFSET + 1]); - return -1; + goto exit; } /* Print all primary/logical partitions */ @@ -223,7 +243,8 @@ static int get_partition_info_extended ( } /* sprintf(info->type, "%d, pt->sys_ind); */ sprintf ((char *)info->type, "U-Boot"); - return 0; + result = 0; + goto exit; } /* Reverse engr the fdisk part# assignment rule! */ @@ -239,12 +260,16 @@ static int get_partition_info_extended ( if (is_extended (pt->sys_ind)) { int lba_start = le32_to_int (pt->start4) + relative; - return get_partition_info_extended (dev_desc, lba_start, - ext_part_sector == 0 ? lba_start : relative, - part_num, which_part, info); + result = get_partition_info_extended(dev_desc, + lba_start, ext_part_sector == 0 ? + lba_start : relative, + part_num, which_part, info); + goto exit; } } - return -1; +exit: + free(buffer); + return result; } void print_part_dos (block_dev_desc_t *dev_desc) Index: u-boot/disk/part_dos.h =================================================================== --- u-boot.orig/disk/part_dos.h +++ u-boot/disk/part_dos.h @@ -25,13 +25,6 @@ #define _DISK_PART_DOS_H -#ifdef CONFIG_ISO_PARTITION -/* Make the buffers bigger if ISO partition support is enabled -- CD-ROMS - have 2048 byte blocks */ -#define DEFAULT_SECTOR_SIZE 2048 -#else -#define DEFAULT_SECTOR_SIZE 512 -#endif #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_PBR_FSTYPE_OFFSET 0x36

3 5

[U-Boot] [PATCH] zlib: split up to match original source tree
by Mike Frysinger 12 May '11

12 May '11

While looking to upgrade to zlib-1.2.5, the current mondo merge of multiple files into a single was making things way more difficult than it should have been. Hard to pick out what has been changed to port it to U-Boot, been removed as useless, and bug fixes added after the fact. So split the single file up into the original file names, and merge non-essential changes back from the original tree (for some reason, style in code in a bunch of places was changed to U-Boot style even though this isn't "U-Boot" code). The original build style is retained -- we have a single zlib.c that includes all the other files, and that is the only file we compile. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- Makefile | 1 + lib/Makefile | 1 - lib/zlib.c | 2218 --------------------------------------------------- lib/zlib/Makefile | 44 + lib/zlib/adler32.c | 125 +++ lib/zlib/inffast.c | 349 ++++++++ lib/zlib/inffast.h | 11 + lib/zlib/inffixed.h | 94 +++ lib/zlib/inflate.c | 956 ++++++++++++++++++++++ lib/zlib/inflate.h | 115 +++ lib/zlib/inftrees.c | 329 ++++++++ lib/zlib/inftrees.h | 55 ++ lib/zlib/zlib.c | 24 + lib/zlib/zlib.h | 20 + lib/zlib/zutil.c | 73 ++ lib/zlib/zutil.h | 121 +++ 16 files changed, 2317 insertions(+), 2219 deletions(-) delete mode 100644 lib/zlib.c create mode 100644 lib/zlib/Makefile create mode 100644 lib/zlib/adler32.c create mode 100644 lib/zlib/inffast.c create mode 100644 lib/zlib/inffast.h create mode 100644 lib/zlib/inffixed.h create mode 100644 lib/zlib/inflate.c create mode 100644 lib/zlib/inflate.h create mode 100644 lib/zlib/inftrees.c create mode 100644 lib/zlib/inftrees.h create mode 100644 lib/zlib/zlib.c create mode 100644 lib/zlib/zlib.h create mode 100644 lib/zlib/zutil.c create mode 100644 lib/zlib/zutil.h diff --git a/Makefile b/Makefile index 8585c1f..a41d1c3 100644 --- a/Makefile +++ b/Makefile @@ -183,6 +183,7 @@ OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib/libgeneric.o LIBS += lib/lzma/liblzma.o LIBS += lib/lzo/liblzo.o +LIBS += lib/zlib/libz.o LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ "board/$(VENDOR)/common/lib$(VENDOR).o"; fi) LIBS += $(CPUDIR)/lib$(CPU).o diff --git a/lib/Makefile b/lib/Makefile index fcfe351..afa6914 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -52,7 +52,6 @@ COBJS-y += string.o COBJS-y += strmhz.o COBJS-y += time.o COBJS-y += vsprintf.o -COBJS-$(CONFIG_ZLIB) += zlib.o COBJS-$(CONFIG_RBTREE) += rbtree.o COBJS := $(COBJS-y) diff --git a/lib/zlib.c b/lib/zlib.c deleted file mode 100644 index e19484a..0000000 --- a/lib/zlib.c +++ /dev/null @@ -1,2218 +0,0 @@ -/* - * This file is derived from various .h and .c files from the zlib-1.2.3 - * distribution by Jean-loup Gailly and Mark Adler, with some additions - * by Paul Mackerras to aid in implementing Deflate compression and - * decompression for PPP packets. See zlib.h for conditions of - * distribution and use. - * - * Changes that have been made include: - * - changed functions not used outside this file to "local" - * - added minCompression parameter to deflateInit2 - * - added Z_PACKET_FLUSH (see zlib.h for details) - * - added inflateIncomp - */ - -/*+++++*/ -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#define ZUTIL_H -#define ZLIB_INTERNAL - -#include <common.h> -#include <compiler.h> -#include <asm/unaligned.h> -#include <watchdog.h> -#include "u-boot/zlib.h" -#undef OFF /* avoid conflicts */ - -/* To avoid a build time warning */ -#ifdef STDC -#include <malloc.h> -#endif - -#ifndef local -#define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] -#define ERR_RETURN(strm,err) return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - -#ifndef NULL -#define NULL ((void *) 0) -#endif - - /* common constants */ - -#ifndef DEF_WBITS -#define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -#define DEF_MEM_LEVEL 8 -#else -#define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - - /* functions */ - -#include <linux/string.h> -#define zmemcpy memcpy -#define zmemcmp memcmp -#define zmemzero(dest, len) memset(dest, 0, len) - -/* Diagnostic functions */ -#ifdef DEBUG - extern int z_verbose; - extern void z_error OF((char *m)); -#define Assert(cond,msg) {if(!(cond)) z_error(msg);} -#define fprintf(fp,...) printf(__VA_ARGS__) -#define Trace(x) {if (z_verbose>=0) fprintf x ;} -#define Tracev(x) {if (z_verbose>0) fprintf x ;} -#define Tracevv(x) {if (z_verbose>1) fprintf x ;} -#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) -#endif - -voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -void zcfree OF((voidpf opaque, voidpf ptr, unsigned size)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0) - -/*+++++*/ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Structure for decoding tables. Each entry provides either the - information needed to do the operation requested by the code that - indexed that table entry, or it provides a pointer to another - table that indexes more bits of the code. op indicates whether - the entry is a pointer to another table, a literal, a length or - distance, an end-of-block, or an invalid code. For a table - pointer, the low four bits of op is the number of index bits of - that table. For a length or distance, the low four bits of op - is the number of extra bits to get after the code. bits is - the number of bits in this code or part of the code to drop off - of the bit buffer. val is the actual byte to output in the case - of a literal, the base length or distance, or the offset from - the current table to the next table. Each entry is four bytes. */ - -typedef struct { - unsigned char op; /* operation, extra bits, table bits */ - unsigned char bits; /* bits in this part of the code */ - unsigned short val; /* offset in table or code value */ -} code; - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1444 code structures (852 for length/literals - and 592 for distances, the latter actually the result of an - exhaustive search). The true maximum is not known, but the value - below is more than safe. */ -#define ENOUGH 2048 -#define MAXD 592 - -/* Type of code to build for inftable() */ -typedef enum { - CODES, - LENS, - DISTS -} codetype; - -extern int inflate_table OF((codetype type, unsigned short FAR *lens, - unsigned codes, code FAR * FAR *table, - unsigned FAR *bits, unsigned short FAR *work)); -/*+++++*/ -/* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#define GUNZIP - -/* Possible inflate modes between inflate() calls */ -typedef enum { - HEAD, /* i: waiting for magic header */ - FLAGS, /* i: waiting for method and flags (gzip) */ - TIME, /* i: waiting for modification time (gzip) */ - OS, /* i: waiting for extra flags and operating system (gzip) */ - EXLEN, /* i: waiting for extra length (gzip) */ - EXTRA, /* i: waiting for extra bytes (gzip) */ - NAME, /* i: waiting for end of file name (gzip) */ - COMMENT, /* i: waiting for end of comment (gzip) */ - HCRC, /* i: waiting for header crc (gzip) */ - DICTID, /* i: waiting for dictionary check value */ - DICT, /* waiting for inflateSetDictionary() call */ - TYPE, /* i: waiting for type bits, including last-flag bit */ - TYPEDO, /* i: same, but skip check to exit inflate on new block */ - STORED, /* i: waiting for stored size (length and complement) */ - COPY, /* i/o: waiting for input or output to copy stored block */ - TABLE, /* i: waiting for dynamic block table lengths */ - LENLENS, /* i: waiting for code length code lengths */ - CODELENS, /* i: waiting for length/lit and distance code lengths */ - LEN, /* i: waiting for length/lit code */ - LENEXT, /* i: waiting for length extra bits */ - DIST, /* i: waiting for distance code */ - DISTEXT, /* i: waiting for distance extra bits */ - MATCH, /* o: waiting for output space to copy string */ - LIT, /* o: waiting for output space to write literal */ - CHECK, /* i: waiting for 32-bit check value */ - LENGTH, /* i: waiting for 32-bit length (gzip) */ - DONE, /* finished check, done -- remain here until reset */ - BAD, /* got a data error -- remain here until reset */ - MEM, /* got an inflate() memory error -- remain here until reset */ - SYNC, /* looking for synchronization bytes to restart inflate() */ - START, - WASH, - END, - BADCODE -} inflate_mode; - -/* - State transitions between above modes - - - (most modes can go to the BAD or MEM mode -- not shown for clarity) - - Process header: - HEAD -> (gzip) or (zlib) - (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME - NAME -> COMMENT -> HCRC -> TYPE - (zlib) -> DICTID or TYPE - DICTID -> DICT -> TYPE - Read deflate blocks: - TYPE -> STORED or TABLE or LEN or CHECK - STORED -> COPY -> TYPE - TABLE -> LENLENS -> CODELENS -> LEN - Read deflate codes: - LEN -> LENEXT or LIT or TYPE - LENEXT -> DIST -> DISTEXT -> MATCH -> LEN - LIT -> LEN - Process trailer: - CHECK -> LENGTH -> DONE - */ - -/* state maintained between inflate() calls. Approximately 7K bytes. */ -struct inflate_state { - inflate_mode mode; /* current inflate mode */ - int last; /* true if processing last block */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - int havedict; /* true if dictionary provided */ - int flags; /* gzip header method and flags (0 if zlib) */ - unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ - unsigned long check; /* protected copy of check value */ - unsigned long total; /* protected copy of output count */ - gz_headerp head; /* where to save gzip header information */ - /* sliding window */ - unsigned wbits; /* log base 2 of requested window size */ - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if needed */ - /* bit accumulator */ - unsigned long hold; /* input bit accumulator */ - unsigned bits; /* number of bits in "in" */ - /* for string and stored block copying */ - unsigned length; /* literal or length of data to copy */ - unsigned offset; /* distance back to copy string from */ - /* for table and code decoding */ - unsigned extra; /* extra bits needed */ - /* fixed and dynamic code tables */ - code const FAR *lencode; /* starting table for length/literal codes */ - code const FAR *distcode; /* starting table for distance codes */ - unsigned lenbits; /* index bits for lencode */ - unsigned distbits; /* index bits for distcode */ - /* dynamic table building */ - unsigned ncode; /* number of code length code lengths */ - unsigned nlen; /* number of length code lengths */ - unsigned ndist; /* number of distance code lengths */ - unsigned have; /* number of code lengths in lens[] */ - code FAR *next; /* next available space in codes[] */ - unsigned short lens[320]; /* temporary storage for code lengths */ - unsigned short work[288]; /* work area for code table building */ - code codes[ENOUGH]; /* space for code tables */ -}; - -/*+++++*/ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-2003 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -void inflate_fast OF((z_streamp strm, unsigned start)); -/*+++++*/ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - - /* WARNING: this file should *not* be used by applications. It - is part of the implementation of the compression library and - is subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; - -/*+++++*/ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#define OFF 1 -#define PUP(a) *++(a) -#define UP_UNALIGNED(a) get_unaligned(++(a)) - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code this; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - write = state->write; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = lcode[hold & lmask]; - dolen: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op == 0) { /* literal */ - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - PUP(out) = (unsigned char)(this.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = dcode[hold & dmask]; - dodist: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - from = window - OFF; - if (write == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (write < op) { /* wrap around window */ - from += wsize + write - op; - op -= write; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (write < len) { /* some from start of window */ - op = write; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += write - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - unsigned short *sout; - unsigned long loops; - - from = out - dist; /* copy direct from output */ - /* minimum length is three */ - /* Align out addr */ - if (!((long)(out - 1 + OFF) & 1)) { - PUP(out) = PUP(from); - len--; - } - sout = (unsigned short *)(out - OFF); - if (dist > 2 ) { - unsigned short *sfrom; - - sfrom = (unsigned short *)(from - OFF); - loops = len >> 1; - do - PUP(sout) = UP_UNALIGNED(sfrom); - while (--loops); - out = (unsigned char *)sout + OFF; - from = (unsigned char *)sfrom + OFF; - } else { /* dist == 1 or dist == 2 */ - unsigned short pat16; - - pat16 = *(sout-2+2*OFF); - if (dist == 1) -#if defined(__BIG_ENDIAN) - pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8); -#elif defined(__LITTLE_ENDIAN) - pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8); -#else -#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined -#endif - loops = len >> 1; - do - PUP(sout) = pat16; - while (--loops); - out = (unsigned char *)sout + OFF; - } - if (len & 1) - PUP(out) = PUP(from); - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - this = dcode[this.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - this = lcode[this.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and write == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -/*+++++*/ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define MAXBITS 15 -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code this; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)1; - this.val = (unsigned short)0; - *(*table)++ = this; /* make a table to force an error */ - *(*table)++ = this; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min <= MAXBITS; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked when a LENS table is being made - against the space in *table, ENOUGH, minus the maximum space needed by - the worst case distance code, MAXD. This should never happen, but the - sufficiency of ENOUGH has not been proven exhaustively, hence the check. - This assumes that when type == LENS, bits == 9. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - this.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - this.op = (unsigned char)0; - this.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - this.op = (unsigned char)(extra[work[sym]]); - this.val = base[work[sym]]; - } - else { - this.op = (unsigned char)(32 + 64); /* end of block */ - this.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = this; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)(len - drop); - this.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - this.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = this; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} - -/*+++++*/ -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->write = 0; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - WATCHDOG_RESET(); - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - if (windowBits < 0) { - state->wrap = 0; - windowBits = -windowBits; - } - else { - state->wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) windowBits &= 15; -#endif - } - if (windowBits < 8 || windowBits > 15) { - ZFREE(strm, state); - strm->state = Z_NULL; - return Z_STREAM_ERROR; - } - state->wbits = (unsigned)windowBits; - state->window = Z_NULL; - return inflateReset(strm); -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -local void fixedtables(state) -struct inflate_state FAR *state; -{ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->write = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->write = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->write; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->write, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->write = copy; - state->whave = state->wsize; - } - else { - state->write += dist; - if (state->write == state->wsize) state->write = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) - -/* check macros for header crc */ -#define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -#define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code this; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - case TYPE: - WATCHDOG_RESET(); - if (flush == Z_BLOCK) goto inf_leave; - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY; - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.val < 16) { - NEEDBITS(this.bits); - DROPBITS(this.bits); - state->lens[state->have++] = this.val; - } - else { - if (this.val == 16) { - NEEDBITS(this.bits + 2); - DROPBITS(this.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (this.val == 17) { - NEEDBITS(this.bits + 3); - DROPBITS(this.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(this.bits + 7); - DROPBITS(this.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* build code tables */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - case LEN: - WATCHDOG_RESET(); - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - break; - } - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.op && (this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - state->length = (unsigned)this.val; - if ((int)(this.op) == 0) { - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - state->mode = LIT; - break; - } - if (this.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - if (this.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(this.op) & 15; - state->mode = LENEXT; - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->mode = DIST; - case DIST: - for (;;) { - this = state->distcode[BITS(state->distbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if ((this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - if (this.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)this.val; - state->extra = (unsigned)(this.op) & 15; - state->mode = DISTEXT; - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - if (state->offset > state->whave + out - left) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->write) { - copy -= state->write; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->write - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) { - WATCHDOG_RESET(); - ZFREE(strm, state->window); - } - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -/*+++++*/ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - -#ifdef DEBUG - -#ifndef verbose -#define verbose 0 -#endif -int z_verbose = verbose; - -void z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - hang (); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) - items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr, nb) - voidpf opaque; - voidpf ptr; - unsigned nb; -{ - free(ptr); - if (opaque) - return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ -/*+++++*/ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define BASE 65521UL /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware */ -#ifdef NO_DIVIDE -#define MOD(a) \ - do { \ - if (a >= (BASE << 16)) \ - a -= (BASE << 16); \ - if (a >= (BASE << 15)) \ - a -= (BASE << 15); \ - if (a >= (BASE << 14)) \ - a -= (BASE << 14); \ - if (a >= (BASE << 13)) \ - a -= (BASE << 13); \ - if (a >= (BASE << 12)) \ - a -= (BASE << 12); \ - if (a >= (BASE << 11)) \ - a -= (BASE << 11); \ - if (a >= (BASE << 10)) \ - a -= (BASE << 10); \ - if (a >= (BASE << 9)) \ - a -= (BASE << 9); \ - if (a >= (BASE << 8)) \ - a -= (BASE << 8); \ - if (a >= (BASE << 7)) \ - a -= (BASE << 7); \ - if (a >= (BASE << 6)) \ - a -= (BASE << 6); \ - if (a >= (BASE << 5)) \ - a -= (BASE << 5); \ - if (a >= (BASE << 4)) \ - a -= (BASE << 4); \ - if (a >= (BASE << 3)) \ - a -= (BASE << 3); \ - if (a >= (BASE << 2)) \ - a -= (BASE << 2); \ - if (a >= (BASE << 1)) \ - a -= (BASE << 1); \ - if (a >= BASE) \ - a -= BASE; \ - } while (0) -#define MOD4(a) \ - do { \ - if (a >= (BASE << 4)) \ - a -= (BASE << 4); \ - if (a >= (BASE << 3)) \ - a -= (BASE << 3); \ - if (a >= (BASE << 2)) \ - a -= (BASE << 2); \ - if (a >= (BASE << 1)) \ - a -= (BASE << 1); \ - if (a >= BASE) \ - a -= BASE; \ - } while (0) -#else -#define MOD(a) a %= BASE -#define MOD4(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} diff --git a/lib/zlib/Makefile b/lib/zlib/Makefile new file mode 100644 index 0000000..1596302 --- /dev/null +++ b/lib/zlib/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libz.o + +COBJS-$(CONFIG_ZLIB) += zlib.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c new file mode 100644 index 0000000..dc9480d --- /dev/null +++ b/lib/zlib/adler32.c @@ -0,0 +1,125 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +#define BASE 65521UL /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware */ +#ifdef NO_DIVIDE +# define MOD(a) \ + do { \ + if (a >= (BASE << 16)) a -= (BASE << 16); \ + if (a >= (BASE << 15)) a -= (BASE << 15); \ + if (a >= (BASE << 14)) a -= (BASE << 14); \ + if (a >= (BASE << 13)) a -= (BASE << 13); \ + if (a >= (BASE << 12)) a -= (BASE << 12); \ + if (a >= (BASE << 11)) a -= (BASE << 11); \ + if (a >= (BASE << 10)) a -= (BASE << 10); \ + if (a >= (BASE << 9)) a -= (BASE << 9); \ + if (a >= (BASE << 8)) a -= (BASE << 8); \ + if (a >= (BASE << 7)) a -= (BASE << 7); \ + if (a >= (BASE << 6)) a -= (BASE << 6); \ + if (a >= (BASE << 5)) a -= (BASE << 5); \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD4(a) \ + do { \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD4(a) a %= BASE +#endif + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD4(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); +} diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c new file mode 100644 index 0000000..8e823df --- /dev/null +++ b/lib/zlib/inffast.c @@ -0,0 +1,349 @@ +/* inffast.c -- fast decoding + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* U-boot: we already included these +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" +*/ + +#ifndef ASMINF + +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#ifdef POSTINC +# define OFF 0 +# define PUP(a) *(a)++ +#else +# define OFF 1 +# define PUP(a) *++(a) +#endif + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + unsigned char FAR *in; /* local strm->next_in */ + unsigned char FAR *last; /* while in < last, enough input available */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code this; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + write = state->write; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = lcode[hold & lmask]; + dolen: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op == 0) { /* literal */ + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + PUP(out) = (unsigned char)(this.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = dcode[hold & dmask]; + dodist: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + from = window - OFF; + if (write == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (write < op) { /* wrap around window */ + from += wsize + write - op; + op -= write; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (write < len) { /* some from start of window */ + op = write; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += write - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + unsigned short *sout; + unsigned long loops; + + from = out - dist; /* copy direct from output */ + /* minimum length is three */ + /* Align out addr */ + if (!((long)(out - 1 + OFF) & 1)) { + PUP(out) = PUP(from); + len--; + } + sout = (unsigned short *)(out - OFF); + if (dist > 2 ) { + unsigned short *sfrom; + + sfrom = (unsigned short *)(from - OFF); + loops = len >> 1; + do + PUP(sout) = get_unaligned(++sfrom); + while (--loops); + out = (unsigned char *)sout + OFF; + from = (unsigned char *)sfrom + OFF; + } else { /* dist == 1 or dist == 2 */ + unsigned short pat16; + + pat16 = *(sout-2+2*OFF); + if (dist == 1) +#if defined(__BIG_ENDIAN) + pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8); +#elif defined(__LITTLE_ENDIAN) + pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8); +#else +#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined +#endif + loops = len >> 1; + do + PUP(sout) = pat16; + while (--loops); + out = (unsigned char *)sout + OFF; + } + if (len & 1) + PUP(out) = PUP(from); + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + this = dcode[this.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + this = lcode[this.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and write == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/lib/zlib/inffast.h b/lib/zlib/inffast.h new file mode 100644 index 0000000..1e88d2d --- /dev/null +++ b/lib/zlib/inffast.h @@ -0,0 +1,11 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +void inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/lib/zlib/inffixed.h b/lib/zlib/inffixed.h new file mode 100644 index 0000000..75ed4b5 --- /dev/null +++ b/lib/zlib/inffixed.h @@ -0,0 +1,94 @@ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. It + is part of the implementation of the compression library and + is subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c new file mode 100644 index 0000000..1eef609 --- /dev/null +++ b/lib/zlib/inflate.c @@ -0,0 +1,956 @@ +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, unsigned out)); + +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + strm->adler = 1; /* to support ill-conceived Java test suite */ + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->wsize = 0; + state->whave = 0; + state->write = 0; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + WATCHDOG_RESET(); + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + if (windowBits < 0) { + state->wrap = 0; + windowBits = -windowBits; + } + else { + state->wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) windowBits &= 15; +#endif + } + if (windowBits < 8 || windowBits > 15) { + ZFREE(strm, state); + strm->state = Z_NULL; + return Z_STREAM_ERROR; + } + state->wbits = (unsigned)windowBits; + state->window = Z_NULL; + return inflateReset(strm); +} + +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; +{ + return inflateInit2_(strm, DEF_WBITS, version, stream_size); +} + +local void fixedtables(state) +struct inflate_state FAR *state; +{ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +local int updatewindow(strm, out) +z_streamp strm; +unsigned out; +{ + struct inflate_state FAR *state; + unsigned copy, dist; + + state = (struct inflate_state FAR *)strm->state; + + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->write = 0; + state->whave = 0; + } + + /* copy state->wsize or less output bytes into the circular window */ + copy = out - strm->avail_out; + if (copy >= state->wsize) { + zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); + state->write = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->write; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->write, strm->next_out - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, strm->next_out - copy, copy); + state->write = copy; + state->whave = state->wsize; + } + else { + state->write += dist; + if (state->write == state->wsize) state->write = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; +} + +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#ifdef GUNZIP +# define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) +#else +# define UPDATE(check, buf, len) adler32(check, buf, len) +#endif + +/* check macros for header crc */ +#ifdef GUNZIP +# define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +# define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) +#endif + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Reverse the bytes in a 32-bit value */ +#define REVERSE(q) \ + ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } + + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; +{ + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + if (strm == Z_NULL || strm->state == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ +#else + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = (char *)"incorrect header check"; + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (len > state->wbits) { + strm->msg = (char *)"invalid window size"; + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = (char *)"unknown header flags set"; + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = (char *)"header crc mismatch"; + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; +#endif + case DICTID: + NEEDBITS(32); + strm->adler = state->check = REVERSE(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + WATCHDOG_RESET(); + if (flush == Z_BLOCK) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + case LEN: + WATCHDOG_RESET(); + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + break; + } + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + state->length = (unsigned)this.val; + if ((int)(this.op) == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + state->mode = LIT; + break; + } + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + if (this.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + state->extra = (unsigned)(this.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->mode = DIST; + case DIST: + for (;;) { + this = state->distcode[BITS(state->distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)this.val; + state->extra = (unsigned)(this.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + if (state->offset > state->whave + out - left) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->write) { + copy -= state->write; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->write - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + REVERSE(hold)) != state->check) { + strm->msg = (char *)"incorrect data check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = (char *)"incorrect length check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) + if (updatewindow(strm, out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; +} + +int ZEXPORT inflateEnd(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) { + WATCHDOG_RESET(); + ZFREE(strm, state->window); + } + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/lib/zlib/inflate.h b/lib/zlib/inflate.h new file mode 100644 index 0000000..07bd3e7 --- /dev/null +++ b/lib/zlib/inflate.h @@ -0,0 +1,115 @@ +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer decoding by inflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip decoding + should be left enabled. */ +#ifndef NO_GZIP +# define GUNZIP +#endif + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN, /* i: waiting for length/lit code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC /* looking for synchronization bytes to restart inflate() */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD or MEM mode -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME + NAME -> COMMENT -> HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or CHECK + STORED -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c new file mode 100644 index 0000000..c6d4c03 --- /dev/null +++ b/lib/zlib/inftrees.c @@ -0,0 +1,329 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* U-boot: we already included these +#include "zutil.h" +#include "inftrees.h" +*/ + +#define MAXBITS 15 + +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) { /* no symbols to code at all */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)1; + this.val = (unsigned short)0; + *(*table)++ = this; /* make a table to force an error */ + *(*table)++ = this; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked when a LENS table is being made + against the space in *table, ENOUGH, minus the maximum space needed by + the worst case distance code, MAXD. This should never happen, but the + sufficiency of ENOUGH has not been proven exhaustively, hence the check. + This assumes that when type == LENS, bits == 9. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + min = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += min; /* here min is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/lib/zlib/inftrees.h b/lib/zlib/inftrees.h new file mode 100644 index 0000000..b1104c8 --- /dev/null +++ b/lib/zlib/inftrees.h @@ -0,0 +1,55 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 0001eeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an + exhaustive search). The true maximum is not known, but the value + below is more than safe. */ +#define ENOUGH 2048 +#define MAXD 592 + +/* Type of code to build for inftable() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/lib/zlib/zlib.c b/lib/zlib/zlib.c new file mode 100644 index 0000000..230d0df --- /dev/null +++ b/lib/zlib/zlib.c @@ -0,0 +1,24 @@ +/* + * This file is derived from various .h and .c files from the zlib-1.2.3 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. See zlib.h for conditions of + * distribution and use. + * + * Changes that have been made include: + * - changed functions not used outside this file to "local" + * - added minCompression parameter to deflateInit2 + * - added Z_PACKET_FLUSH (see zlib.h for details) + * - added inflateIncomp + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" +#include "inffixed.h" +#include "inffast.c" +#include "inftrees.c" +#include "inflate.c" +#include "zutil.c" +#include "adler32.c" diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h new file mode 100644 index 0000000..556be32 --- /dev/null +++ b/lib/zlib/zlib.h @@ -0,0 +1,20 @@ +/* Glue between u-boot and upstream zlib */ +#ifndef __GLUE_ZLIB_H__ +#define __GLUE_ZLIB_H__ + +#include <common.h> +#include <compiler.h> +#include <asm/unaligned.h> +#include <watchdog.h> +#include "u-boot/zlib.h" + +/* avoid conflicts */ +#undef OFF +#undef ASMINF +#undef POSTINC +#undef NO_GZIP +#define GUNZIP +#undef STDC +#undef NO_ERRNO_H + +#endif diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c new file mode 100644 index 0000000..65f9554 --- /dev/null +++ b/lib/zlib/zutil.c @@ -0,0 +1,73 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + +#ifdef DEBUG + +#ifndef verbose +#define verbose 0 +#endif +int z_verbose = verbose; + +void z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + hang (); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) + items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void zcfree (opaque, ptr, nb) + voidpf opaque; + voidpf ptr; + unsigned nb; +{ + free(ptr); + if (opaque) + return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h new file mode 100644 index 0000000..46522c8 --- /dev/null +++ b/lib/zlib/zutil.h @@ -0,0 +1,121 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef ZUTIL_H +#define ZUTIL_H + +#define ZLIB_INTERNAL +#include "zlib.h" + +#ifdef STDC +# ifndef _WIN32_WCE +# include <stddef.h> +# endif +# include <string.h> +# include <stdlib.h> +#endif +#ifdef NO_ERRNO_H +# ifdef _WIN32_WCE + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. We rename it to + * avoid conflict with other libraries that use the same workaround. + */ +# define errno z_errno +# endif + extern int errno; +#else +# ifndef _WIN32_WCE +# include <errno.h> +# endif +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + + /* functions */ + +#include <linux/string.h> +#define zmemcpy memcpy +#define zmemcmp memcmp +#define zmemzero(dest, len) memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef DEBUG +# include <stdio.h> + extern int z_verbose; + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr, unsigned size)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* ZUTIL_H */ -- 1.7.5.rc1

2 4

[U-Boot] [PATCH 0/5] introduce nand write.ubi, and drop ffs for jffs2 too
by Ben Gardiner 11 May '11

11 May '11

It was found that on da850evm, where the NAND ECC used does not map all 0xff data to 0xff ECC, that flashing UBI and JFFS2 image from U-boot with nand write[.e] command resulted in alot of ECC errors... for UBI the result was an unmountable filesystem on second attach from linux. For JFFS2 the result was a multitude of ECC errors printed on the cosole on the second mount in Linux -- the filesystem remains mountable for awhile but eventually collapses. By implementing the procedure reccomended in the UBI FAQ of dropping trailing pages containing entirely 0xff both UBI images and JFFS2 filesystems flashed with from u-boot were found to survive past the second time around. Ben Gardiner (5): nand_base: trivial: fix comment read/write comment nand_util: convert nand_write_skip_bad() to flags nand_util: drop trailing all-0xff pages if requested cmd_nand: add nand write.ubi command cmd_nand: also drop 0xff pages for jffs2 common/cmd_nand.c | 15 ++++++++++++--- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_util.c | 37 ++++++++++++++++++++++++++++++------- include/nand.h | 6 +++++- 4 files changed, 48 insertions(+), 12 deletions(-)

3 11

[U-Boot] [PATCH] [v5] powerpc/85xx: fix compatible property for the L2 cache node
by Timur Tabi 11 May '11

11 May '11

The compatible property for the L2 cache node (on 85xx systems that don't have a CPC) was using a value for the property length that did not match the actual length of the property. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/fdt.c | 29 +++++++++++++++++++---------- 1 files changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 642f6c5..7137076 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -165,7 +165,6 @@ static inline void ft_fixup_l2cache(void *blob) int len, off; u32 *ph; struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); - char compat_buf[38]; const u32 line_size = 32; const u32 num_ways = 8; @@ -192,22 +191,32 @@ static inline void ft_fixup_l2cache(void *blob) } if (cpu) { - if (isdigit(cpu->name[0])) - len = sprintf(compat_buf, - "fsl,mpc%s-l2-cache-controller", cpu->name); - else - len = sprintf(compat_buf, - "fsl,%c%s-l2-cache-controller", - tolower(cpu->name[0]), cpu->name + 1); + char buf[40]; + + if (isdigit(cpu->name[0])) { + /* MPCxxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", + cpu->name) + 1; + } else { + /* Pxxxx or Txxxx, where xxxx == 4-digit number */ + len = sprintf(buf, "fsl,%c%s-l2-cache-controller", + tolower(cpu->name[0]), cpu->name + 1) + 1; + } + + /* + * append "cache" after the NULL character that the previous + * sprintf wrote. This is how a device tree stores multiple + * strings in a property. + */ + len += sprintf(buf + len, "cache") + 1; - sprintf(&compat_buf[len + 1], "cache"); + fdt_setprop(blob, off, "compatible", buf, len); } fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); fdt_setprop_cell(blob, off, "cache-sets", num_sets); fdt_setprop_cell(blob, off, "cache-level", 2); - fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf)); /* we dont bother w/L3 since no platform of this type has one */ } -- 1.7.3.4

2 1

[U-Boot] boot-up time optimization. Where to start?
by Simon Schwarz 11 May '11

11 May '11

Hi there, I just started to work on my bachelor thesis. It is about "Linux boot-up time optimization". The past days I spend analyzing what consumes the most time in the boot process. I found that u-boot takes pretty much as long as the whole Linux kernel (the one we are using). I started digging into the source and I think I have a big picture of what is going on. I already learned from the mailing list that it is a good idea to start a discussion early if you plan to change something and want it upstream. At this point of my thesis I'am free to choose where I start - only string attached is that if it is platform specific it has to be TI OMAP3. So here is my question: Where do you see the most potential to optimize u-boot? I already have two bullets on my list (just some ideas - maybe totally unrealistic *g*): - Use Hardware specific copy commands - build the checksum while moving the kernel to RAM Thanks! Simon

10 24

[U-Boot] [PATCH] mx31pdk: Clean up mx31pdk.h file
by Fabio Estevam 10 May '11

10 May '11

No need to use '#define SYMBOL 1' to make it active. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- include/configs/mx31pdk.h | 32 ++++++++++++++++---------------- 1 files changed, 16 insertions(+), 16 deletions(-) diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index d4c6d16..50e751a 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -33,17 +33,17 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT @@ -59,11 +59,11 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX31_UART1 -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 +#define CONFIG_HARD_SPI +#define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) @@ -72,7 +72,7 @@ #define CONFIG_FSL_PMIC_CS 2 #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_RTC_MC13783 1 +#define CONFIG_RTC_MC13783 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -112,9 +112,9 @@ "nand write 0x81000000 0x0 0x40000\0" #define CONFIG_NET_MULTI -#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0xB6000000 -#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_32_BIT /* * Miscellaneous configurable options @@ -139,7 +139,7 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- * Stack sizes @@ -154,7 +154,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR @@ -166,9 +166,9 @@ * FLASH and environment organization */ /* No NOR flash present */ -#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_OFFSET_REDUND 0x60000 #define CONFIG_ENV_SIZE (128 * 1024) -- 1.6.0.4

3 2

[U-Boot] [PATCH] MIPS: Introduce --gc-sections for MIPS
by daniel.schwierzeck＠googlemail.com 09 May '11

09 May '11

All architectures but MIPS are using --gc-sections on final linking. This patch introduces that feature for MIPS to reduce the memory and flash footprint. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck(a)googlemail.com> Cc: Shinya Kuribayashi <skuribay(a)pobox.com> Cc: Wolfgang Denk <wd(a)denx.de> Cc: Stefan Roese <sr(a)denx.de> Cc: Thomas Lange <thomas(a)corelatus.se> Cc: Vlad Lungu <vlad.lungu(a)windriver.com> --- Tested with ELDK-4.1 and self-built gcc-4.3.3/binutils-2.19.1 on my boards. I could not test the other boards so I would appreciate it if the maintainers in CC could do a quick test on their boards. arch/mips/config.mk | 2 ++ board/dbau1x00/u-boot.lds | 10 +++++----- board/gth2/u-boot.lds | 10 +++++----- board/incaip/u-boot.lds | 10 +++++----- board/micronas/vct/u-boot.lds | 10 +++++----- board/pb1x00/u-boot.lds | 10 +++++----- board/qemu-mips/u-boot.lds | 10 +++++----- board/tb0229/u-boot.lds | 10 +++++----- examples/standalone/mips.lds | 10 +++++----- 9 files changed, 42 insertions(+), 40 deletions(-) diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 318d34b..6ab8acd 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -50,3 +50,5 @@ PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic PLATFORM_CPPFLAGS += -msoft-float PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections +LDFLAGS_FINAL += --gc-sections diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds index 3c4fbe3..4a59cea 100644 --- a/board/dbau1x00/u-boot.lds +++ b/board/dbau1x00/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -52,7 +52,7 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } .u_boot_cmd : { __u_boot_cmd_start = .; @@ -64,7 +64,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds index aeb0fcc..9fc417f 100644 --- a/board/gth2/u-boot.lds +++ b/board/gth2/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -52,7 +52,7 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } .u_boot_cmd : { __u_boot_cmd_start = .; @@ -64,7 +64,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds index 3c4fbe3..4a59cea 100644 --- a/board/incaip/u-boot.lds +++ b/board/incaip/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -52,7 +52,7 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } .u_boot_cmd : { __u_boot_cmd_start = .; @@ -64,7 +64,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/board/micronas/vct/u-boot.lds b/board/micronas/vct/u-boot.lds index b90b186..3a05ef9 100644 --- a/board/micronas/vct/u-boot.lds +++ b/board/micronas/vct/u-boot.lds @@ -31,14 +31,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -50,7 +50,7 @@ SECTIONS } . = ALIGN(4); - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } . = ALIGN(4); .u_boot_cmd : { @@ -64,8 +64,8 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } + .sbss (NOLOAD) : { *(.sbss*) } . = ALIGN(4); - .bss (NOLOAD) : { *(.bss) } + .bss (NOLOAD) : { *(.bss*) } uboot_end = .; } diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds index 358cc54..bd0dee1 100644 --- a/board/pb1x00/u-boot.lds +++ b/board/pb1x00/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -52,7 +52,7 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } .u_boot_cmd : { __u_boot_cmd_start = .; @@ -64,7 +64,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds index bd16786..9460b20 100644 --- a/board/qemu-mips/u-boot.lds +++ b/board/qemu-mips/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) +0x7ff0; @@ -53,7 +53,7 @@ SECTIONS } . = ALIGN(4); - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } . = .; .u_boot_cmd : { @@ -66,7 +66,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss : { *(.sbss) } - .bss : { *(.bss) . = ALIGN(4); } + .sbss : { *(.sbss*) } + .bss : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds index 56d7c25..5ea1094 100644 --- a/board/tb0229/u-boot.lds +++ b/board/tb0229/u-boot.lds @@ -34,14 +34,14 @@ SECTIONS . = ALIGN(4); .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -52,7 +52,7 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } .u_boot_cmd : { __u_boot_cmd_start = .; @@ -64,7 +64,7 @@ SECTIONS num_got_entries = (__got_end - __got_start) >> 2; . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } uboot_end = .; } diff --git a/examples/standalone/mips.lds b/examples/standalone/mips.lds index 63a1c92..5f766ed 100644 --- a/examples/standalone/mips.lds +++ b/examples/standalone/mips.lds @@ -30,14 +30,14 @@ SECTIONS { .text : { - *(.text) + *(.text*) } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } . = ALIGN(4); - .data : { *(.data) } + .data : { *(.data*) } . = .; _gp = ALIGN(16) + 0x7ff0; @@ -48,12 +48,12 @@ SECTIONS __got_end = .; } - .sdata : { *(.sdata) } + .sdata : { *(.sdata*) } . = ALIGN(4); __bss_start = .; - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } _end = .; } -- 1.7.4.3

3 3

[U-Boot] Please pull u-boot-ti/master
by s-paulraj＠ti.com 09 May '11

09 May '11

The following changes since commit e2b1fb98dab08f18e456fd8d846440fe81567785: Sandeep Paulraj (1): Merge branch 'master' of git://git.denx.de/u-boot-arm are available in the git repository at: git://git.denx.de/u-boot-ti.git master Ben Gardiner (1): da850evm: fix NAND WSTROBE and TA timings board/davinci/da8xxevm/da850evm.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)

3 2