November 2011 - U-Boot

[U-Boot] CONGRATULATIONS YOUR EMAIL JUST WON!!!
by UNDP 05 Nov '11

05 Nov '11

United Nation Development Program UN House, London, United Kingdom. The UNITED NATION DEVELOPMENT PROGRAM would like to notify you that your email address just won the sum of $400,000 (Four hundred thousand USD). The email address was selected from an exclusive list of 250,000 e-mail addresses of individual and corporate bodies picked by an advanced automated random computer balloting system. Contact Mr. Robert Bailey via Email with the below information for claim: 1.FULL NAME 2.ADDRESS 3.COUNTRY 4.SEX 5.AGE 6.OCCUPATION 7.TELEPHONE NAME: Mr. Robert Bailey Email: undpverificationdeptt(a)live.com Claims Processing Agent, Verifications/Logistic Department. Warm Regards Patricia Gallen (Online Announcer UNDP)

1 0

[U-Boot] [PATCH] Blackfin: cache result of cpp check
by Mike Frysinger 05 Nov '11

05 Nov '11

Avoid overhead of computing this value multiple times. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- arch/blackfin/config.mk | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index f9d46de..3595aa2 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -48,9 +48,10 @@ ALL-y += $(obj)u-boot.ldr endif ifeq ($(CONFIG_ENV_IS_EMBEDDED_IN_LDR),y) CREATE_LDR_ENV = $(obj)tools/envcrc --binary > $(obj)env-ldr.o -HOSTCFLAGS_NOPED += \ +HOSTCFLAGS_NOPED_ADSP := \ $(shell $(CPP) -dD - -mcpu=$(CONFIG_BFIN_CPU) </dev/null \ | awk '$$2 ~ /ADSP/ { print "-D" $$2 }') +HOSTCFLAGS_NOPED += $(HOSTCFLAGS_NOPED_ADSP) else CREATE_LDR_ENV = endif -- 1.7.6.1

1 0

[U-Boot] [PATCH] arm: jadecpu: Readd MACH_TYPE_JADECPU
by Matthias Weisser 05 Nov '11

05 Nov '11

MACH_TYPE_JADECPU was removed from mach-types.h. Add it to board config file. Signed-off-by: Matthias Weisser <weisserm(a)arcor.de> --- board/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-) diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c index 63a0d33..72288fe 100644 --- a/board/syteco/jadecpu/jadecpu.c +++ b/board/syteco/jadecpu/jadecpu.c @@ -40,7 +40,6 @@ int board_init(void) writel(0x00000010, &ccnt->cmux_md); gd->flags = 0; - gd->bd->bi_arch_number = MACH_TYPE_JADECPU; gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000; icache_enable(); diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index a239efc..42cb858 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -37,6 +37,12 @@ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU + /* * Environment settings */ -- 1.7.4.1

4 8

[U-Boot] About the pull request and patchwork
by 馬克泡 05 Nov '11

05 Nov '11

Hi all, I've noticed that there are many pull request logged inside the patchwork. The most of the pull request has been processed but not been removed in patchwork. This make a lot of useless pull request log in the patchwork and made more difficult to tracking other patches. I think if we (custodians) could assigned the pull request as "accept" or something after Wolfgang has pull the commits from downstream will be good. What do you guys think about it? -- Best regards, Macpaul Lin

2 3

[U-Boot] [PATCH v3 0/8] tegra2: Implement SPI flash and saved environment
by Simon Glass 05 Nov '11

05 Nov '11

Enable SPI flash on the Tegra2 Seaboard along with a saved 8KB environment. This involves a few pieces: - Tegra2 SPI driver - Seaboard config changes - a SPI / UART switch to handle switching between SPI and console UART This series applies cleanly on top of Stephen Warren's latest patch series http://patchwork.ozlabs.org/project/uboot/list/?submitter=Stephen+Warren&st… (the first patch of which is already applied) and also requires Stephen's GPIO fix. http://patchwork.ozlabs.org/patch/118184/ Still to come are the NS16550 driver changes to cope with the pins disappearing from under it. This patch series has been NAKed, the XON/XOFF series won't really help and it isn't clear exactly what to do here. I will return to this another day. http://patchwork.ozlabs.org/patch/120013/ This patch series has been tested on Seaboard and other Tegra2 hardware. Changes in v2: - Update to support SPI mode and frequency - Tidy driver according to comments, and tidy a little more - Add CONFIG_SPI_FLASH_SIZE to define flash size - Add config for SPI environment mode/speed - Fix up GPIO selection to use gpio_request() first - Rename uart-spi-fix to uart-spi-switch - Rename uart/spi_enable() to pinmux_select_uart/spi() - Add pinmux logic to SPI driver Changes in v3: - Remove the replaced bus/cs check function - Change (bitlen & 7) to (bitlen % 8) - Remove unneeded #includes and header file guard Simon Glass (7): tegra2: Tidy UART selection tegra2: Add UARTB support tegra2: config: Enable SPI flash on Seaboard tegra2: Enable SPI environment on Seaboard tegra2: Implement SPI / UART GPIO switch tegra2: spi: Support SPI / UART switch tegra2: Plumb in SPI/UART switch code Tom Warren (1): tegra2: spi: Add SPI driver for Tegra2 SOC arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ board/nvidia/common/Makefile | 47 ++++ board/nvidia/common/board.c | 79 ++++-- board/nvidia/common/board.h | 1 + board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ board/nvidia/seaboard/Makefile | 1 - board/nvidia/seaboard/seaboard.c | 3 + drivers/spi/Makefile | 1 + drivers/spi/tegra2_spi.c | 274 ++++++++++++++++++++ include/configs/harmony.h | 3 + include/configs/seaboard.h | 20 ++ include/configs/tegra2-common.h | 3 +- 14 files changed, 667 insertions(+), 26 deletions(-) create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h create mode 100644 board/nvidia/common/Makefile create mode 100644 board/nvidia/common/uart-spi-switch.c create mode 100644 drivers/spi/tegra2_spi.c -- 1.7.3.1

1 8

[U-Boot] [PATCH 0/9] tegra2: Tidy up boot path
by Simon Glass 05 Nov '11

05 Nov '11

On Tegra2 the AVP runs the normal U-Boot code to a point, then halts and the A9 takes over. The current Tegra2 boot path is fairly complex, since it has a separate path and code for the Cortex-A9 and the AVP. In fact, they can largely execute the same code path. This series cleans up this logic and removes some parallel and un-needed code. Simon Glass (9): tegra2: Add arch_cpu_init() to fire up Cortex-A9 tegra2: Simplify tegra_start() boot path arm: Move CP15 init out of cpu_init_crit() tegra2: Enable instruction cache tegra2: Remove unneeded boot code tegra2: Remove unneeded config option tegra2: Remove unused low-level Tegra2 UART code tegra2: Remove unneeded 'dynamic ram size' message tegra2: Don't use board pointer before it is set up arch/arm/cpu/armv7/start.S | 36 +++++----- arch/arm/cpu/armv7/tegra2/Makefile | 7 ++- arch/arm/cpu/armv7/tegra2/ap20.c | 54 +++++++------ arch/arm/cpu/armv7/tegra2/ap20.h | 10 +-- arch/arm/cpu/armv7/tegra2/board.c | 35 ++++----- arch/arm/cpu/armv7/tegra2/config.mk | 28 ------- arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 ----------------------------- arch/arm/include/asm/u-boot-arm.h | 3 + arch/arm/lib/Makefile | 6 ++ board/nvidia/common/board.c | 6 +- board/nvidia/common/board.h | 1 - drivers/serial/Makefile | 1 - drivers/serial/serial_tegra2.c | 77 ------------------- drivers/serial/serial_tegra2.h | 29 ------- include/configs/tegra2-common.h | 4 +- 15 files changed, 86 insertions(+), 329 deletions(-) delete mode 100644 arch/arm/cpu/armv7/tegra2/config.mk delete mode 100644 drivers/serial/serial_tegra2.c delete mode 100644 drivers/serial/serial_tegra2.h -- 1.7.3.1

4 45

[U-Boot] HI
by Grace Richard 05 Nov '11

05 Nov '11

Greeting From Grace (gracegilbath(a)yahoo.com) I am Grace Richard by name, still single, open minded, good looking, sincere, i am looking for an honest,loyal,sincere and godly minded person. i saw your email contact today in this search engine and was interested and will like to have good friendship with you, i hope you will welcome my friend request. I will tell you more about me send to you my pictures in my nest mail. I will be waiting to read back from you as soon as you receive this my mail, dear please contact me here direct to mail box (gracegilbath(a)yahoo.com) so that i reply you quick. Thanks and God bless you. yours Grace.

1 0

[U-Boot] [PATCH V2] ARM: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board
by Jens Scharsig 05 Nov '11

05 Nov '11

* re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board Signed-off-by: Jens Scharsig <js_at_ng(a)scharsoft.de> --- include/configs/eb_cpux9k2.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 4324172..ad51906 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -41,6 +41,8 @@ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_EARLY_INIT_F +#define MACH_TYPE_EB_CPUX9K2 1977 + /*--------------------------------------------------------------------------*/ #define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ -- 1.7.3.4

3 7

[U-Boot] Boards compiled twice in ./MAKEALL arm?
by Albert ARIBAUD 05 Nov '11

05 Nov '11

Hi all, When applying the meesc mach-type patch, I noticed a weird thing: on commit 867b96a5b7b1de56181b57bdfb25151c01a0fb3f, just before fixing meesc, I did a ./MAKEALL arm and noticed that some boards were mentioned twice in the build summary: --------------------- SUMMARY ---------------------------- Boards compiled: 255 Boards with warnings or errors: 67 ( a320evb eb_cpux9k2 VCMA9 sbc35_a9g20_nandflash sbc35_a9g20_eeprom tny_a9g20_nandflash tny_a9g20_eeprom tny_a9260_nandflash tny_a9260_eeprom meesc meesc_dataflash otc570 otc570_dataflash pm9261 pm9263 pm9g45 da830evm da850evm cam_enc_4xx hawkboard_nand davinci_schmoogie davinci_sonata km_kirkwood km_kirkwood_pci mgcoge3un portl2 jadecpu dkb tt01 mx31pdk_nand smdk6400 ca9x4_ct_vxp am335x_evm omap3_mvblx omap4_panda harmony seaboard eb_cpux9k2 sbc35_a9g20_nandflash sbc35_a9g20_eeprom tny_a9g20_nandflash tny_a9g20_eeprom tny_a9260_nandflash tny_a9260_eeprom meesc meesc_dataflash otc570 otc570_dataflash pm9261 pm9263 pm9g45 cerf250 cradle csb226 innokom pleb2 xm250 actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 dvlhost pdnb3 scpu ) ---------------------------------------------------------- Namely, the wole of 'sbc35_a9g20_nandflash sbc35_a9g20_eeprom tny_a9g20_nandflash tny_a9g20_eeprom tny_a9260_nandflash tny_a9260_eeprom meesc meesc_dataflash otc570 otc570_dataflash pm9261 pm9263 pm9g45' is mentioned twice. Anyone have any idea why? Amicalement, -- Albert.

1 0

[U-Boot] [PATCH 1/2] at91: defined mach-types for meesc board in board config file
by Daniel Gorsulowski 05 Nov '11

05 Nov '11

quotation from Albert ARIBAUD: "Recently the ARM mach-types.h file has been brought in sync with its Linux original, leasing to a number of boards not being listed any more, as the new list only contains boards which have actual Linux support or were declared less than one year ago. The symptom is a build failure with a message of the form "error: 'MACH_TYPE_XXXXXX' undeclared (first use in this function)". U-Boot maintainers of such boards (in Cc: of this mail) should provide a patch to re-introduce the MACH_TYPE_XXXXXX definition in their boards' config header file in include/configs/." Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski(a)esd.eu> --- include/configs/meesc.h | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/include/configs/meesc.h b/include/configs/meesc.h index a2b55d5..ea40290 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -45,6 +45,14 @@ */ #define CONFIG_SYS_TEXT_BASE 0x20002000 +/* + * since a number of boards are not being listed in linux + * arch/arm/tools/mach-types any more, the mach-types have to be + * defined here + */ +#define MACH_TYPE_MEESC 2165 +#define MACH_TYPE_ETHERCAN2 2407 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -- 1.5.3

2 1