November 2011 - U-Boot

[U-Boot] [PATCH v7 1/4] tegra2: Move MMC clock initialization into MMC driver
by Stephen Warren 15 Nov '11

15 Nov '11

This centralizes knowledge of MMC clocking into the MMC driver. This also removes clock setup from the board files, which will simplify later changes that modify the Harmony board to support the correct set of MMC controllers. Signed-off-by: Stephen Warren <swarren(a)nvidia.com> Cc: Andy Fleming <afleming(a)gmail.com> Acked-by: Simon Glass <sjg(a)chromium.org> Tested-by: Simon Glass <sjg(a)chromium.org> --- board/nvidia/common/board.c | 13 +------------ drivers/mmc/tegra2_mmc.c | 12 +++++++++--- 2 files changed, 10 insertions(+), 15 deletions(-) diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index d13537d..370a259 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -102,16 +102,6 @@ static void pin_mux_uart(void) #ifdef CONFIG_TEGRA2_MMC /* - * Routine: clock_init_mmc - * Description: init the PLL and clocks for the SDMMC controllers - */ -static void clock_init_mmc(void) -{ - clock_start_periph_pll(PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH, 20000000); - clock_start_periph_pll(PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH, 20000000); -} - -/* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ @@ -157,8 +147,7 @@ int board_init(void) int board_mmc_init(bd_t *bd) { debug("board_mmc_init called\n"); - /* Enable clocks, muxes, etc. for SDMMC controllers */ - clock_init_mmc(); + /* Enable muxes, etc. for SDMMC controllers */ pin_mux_mmc(); gpio_config_mmc(); diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c index 9e741f2..78b1190 100644 --- a/drivers/mmc/tegra2_mmc.c +++ b/drivers/mmc/tegra2_mmc.c @@ -435,14 +435,22 @@ static int mmc_core_init(struct mmc *mmc) static int tegra2_mmc_initialize(int dev_index, int bus_width) { + struct mmc_host *host; struct mmc *mmc; debug(" mmc_initialize called\n"); + host = &mmc_host[dev_index]; + + host->clock = 0; + tegra2_get_setup(host, dev_index); + + clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); + mmc = &mmc_dev[dev_index]; sprintf(mmc->name, "Tegra2 SD/MMC"); - mmc->priv = &mmc_host[dev_index]; + mmc->priv = host; mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_core_init; @@ -465,8 +473,6 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width) mmc->f_min = 375000; mmc->f_max = 48000000; - mmc_host[dev_index].clock = 0; - tegra2_get_setup(&mmc_host[dev_index], dev_index); mmc_register(mmc); return 0; -- 1.7.0.4

3 6

[U-Boot] Goodday my good friend,
by James Kabore 15 Nov '11

15 Nov '11

Goodday my good friend, Letme start by introducing myself. I am Mr James Kabore, an accounts officer withBank of Africa here in Burkina Faso West Africa.Iam writing you this letter based on the latest development at my bank which Iwill like to bring to your personal edification. ($9million) transfer claim into your bank account. Pleaded,do reply for more detail on how we are going to proceed if you are interested.And also you can contact me via me email: (jameskabore5(a)gmail.com) MrJames Kabore+22675447235.

1 0

[U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support
by Vladimir Zapolskiy 15 Nov '11

15 Nov '11

This patchset adds generic NXP LPC32XX SoC support and basic support for Embest/Timll DevKit3250 board, which powered by this SoC. The patchset is done on top of u-boot-arm/next branch. Vladimir Zapolskiy (3): arm926ejs: add NXP LPC32x0 cpu series support devkit3250: add Timll DevKit3250 board initial support devkit3250: add DevKit3250 board maintainer MAINTAINERS | 4 + arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 +++++++ arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c | 118 ++++++++++++++++++ arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 58 +++++++++ arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 47 +++++++ arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 94 ++++++++++++++ arch/arm/include/asm/arch-lpc32xx/clk.h | 163 +++++++++++++++++++++++++ arch/arm/include/asm/arch-lpc32xx/config.h | 59 +++++++++ arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 ++++++++++ arch/arm/include/asm/arch-lpc32xx/emc.h | 92 ++++++++++++++ arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 ++++ arch/arm/include/asm/arch-lpc32xx/timer.h | 74 +++++++++++ arch/arm/include/asm/arch-lpc32xx/uart.h | 54 ++++++++ arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++++++++ board/timll/devkit3250/Makefile | 44 +++++++ board/timll/devkit3250/devkit3250.c | 71 +++++++++++ boards.cfg | 3 +- include/configs/devkit3250.h | 121 ++++++++++++++++++ 18 files changed, 1186 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h create mode 100644 board/timll/devkit3250/Makefile create mode 100644 board/timll/devkit3250/devkit3250.c create mode 100644 include/configs/devkit3250.h -- 1.7.5.4

2 8

[U-Boot] Please pull u-boot-ti/master
by s-paulraj＠ti.com 15 Nov '11

15 Nov '11

The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783: Nagabhushana Netagunte (1): da850: add new config file for AM18xx are available in the git repository at: git://git.denx.de/u-boot-ti.git master Heiko Schocher (3): arm, davinci: da850/dm365 lowlevel cleanup arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: add DAVINCI_MMC_CLKID Sricharan (7): omap4: make omap4 code common for future reuse omap: Checkpatch fixes omap5: Add minimal support for omap5430. omap5: clocks: Add clocks support for omap5 platform. omap5: emif: Add emif/ddr configurations required for omap5 evm omap4/5: Add support for booting with CH. omap5: Add omap5_evm board build support. MAINTAINERS | 1 + Makefile | 9 +- README | 6 + arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 122 +-- arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 73 +- arch/arm/cpu/armv7/omap-common/Makefile | 13 + arch/arm/cpu/armv7/omap-common/clocks-common.c | 609 +++++++++++ arch/arm/cpu/armv7/omap-common/emif-common.c | 1140 ++++++++++++++++++++ arch/arm/cpu/armv7/omap-common/hwinit-common.c | 267 +++++ .../armv7/{omap4 => omap-common}/lowlevel_init.S | 37 +- .../{omap4/mem.c => omap-common/mem-common.c} | 0 arch/arm/cpu/armv7/omap-common/spl.c | 9 +- arch/arm/cpu/armv7/omap4/Makefile | 11 +- arch/arm/cpu/armv7/omap4/board.c | 384 ------- arch/arm/cpu/armv7/omap4/clocks.c | 628 ++--------- arch/arm/cpu/armv7/omap4/emif.c | 1135 +------------------- arch/arm/cpu/armv7/omap4/hwinit.c | 167 +++ arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 83 -- arch/arm/cpu/armv7/omap4/sdram_elpida.c | 2 +- arch/arm/cpu/armv7/omap4/sys_info.c | 53 - arch/arm/cpu/armv7/omap5/Makefile | 48 + arch/arm/cpu/armv7/omap5/clocks.c | 432 ++++++++ arch/arm/cpu/armv7/omap5/config.mk | 28 + arch/arm/cpu/armv7/omap5/emif.c | 105 ++ arch/arm/cpu/armv7/omap5/hwinit.c | 78 ++ arch/arm/cpu/armv7/omap5/sdram_elpida.c | 178 +++ arch/arm/include/asm/arch-davinci/aintc_defs.h | 2 + arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 2 +- arch/arm/include/asm/arch-davinci/ddr2_defs.h | 4 + arch/arm/include/asm/arch-davinci/emif_defs.h | 1 + arch/arm/include/asm/arch-davinci/hardware.h | 21 + arch/arm/include/asm/arch-davinci/pll_defs.h | 14 + arch/arm/include/asm/arch-omap3/mmc_host_def.h | 11 +- arch/arm/include/asm/arch-omap4/clocks.h | 23 + arch/arm/include/asm/arch-omap4/emif.h | 1021 ------------------ arch/arm/include/asm/arch-omap4/mmc_host_def.h | 11 +- .../arm/include/asm/arch-omap4/{omap4.h => omap.h} | 46 +- arch/arm/include/asm/arch-omap4/sys_proto.h | 38 +- arch/arm/include/asm/arch-omap5/clocks.h | 722 +++++++++++++ arch/arm/include/asm/arch-omap5/cpu.h | 175 +++ arch/arm/include/asm/arch-omap5/gpio.h | 50 + arch/arm/include/asm/arch-omap5/i2c.h | 74 ++ arch/arm/include/asm/arch-omap5/mmc_host_def.h | 174 +++ arch/arm/include/asm/arch-omap5/mux_omap5.h | 344 ++++++ .../asm/{arch-omap4/omap4.h => arch-omap5/omap.h} | 104 +- arch/arm/include/asm/arch-omap5/sys_proto.h | 122 +++ arch/arm/include/asm/armv7.h | 3 + arch/arm/include/asm/emif.h | 1035 ++++++++++++++++++ arch/arm/include/asm/mach-types.h | 13 + arch/arm/include/asm/omap_common.h | 31 +- board/ti/omap5_evm/Makefile | 49 + board/ti/omap5_evm/evm.c | 101 ++ board/ti/omap5_evm/mux_data.h | 275 +++++ board/ti/panda/Makefile | 2 - board/ti/panda/panda.c | 27 +- board/ti/panda/panda_mux_data.h | 54 +- board/ti/sdp4430/Makefile | 4 +- board/ti/sdp4430/sdp.c | 27 +- board/ti/sdp4430/sdp4430_mux_data.h | 53 +- boards.cfg | 1 + drivers/mmc/omap_hsmmc.c | 26 +- drivers/net/davinci_emac.c | 24 +- include/configs/omap4_common.h | 7 +- include/configs/omap5_evm.h | 284 +++++ spl/Makefile | 3 + 65 files changed, 7108 insertions(+), 3488 deletions(-) create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%) rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%) delete mode 100644 arch/arm/cpu/armv7/omap4/board.c create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h delete mode 100644 arch/arm/cpu/armv7/omap4/sys_info.c create mode 100644 arch/arm/cpu/armv7/omap5/Makefile create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c create mode 100644 arch/arm/cpu/armv7/omap5/config.mk create mode 100644 arch/arm/cpu/armv7/omap5/emif.c create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h copy arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%) create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h rename arch/arm/include/asm/{arch-omap4/omap4.h => arch-omap5/omap.h} (65%) create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h create mode 100644 arch/arm/include/asm/emif.h create mode 100644 board/ti/omap5_evm/Makefile create mode 100644 board/ti/omap5_evm/evm.c create mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 include/configs/omap5_evm.h

2 1

[U-Boot] [PULL] u-boot-pxa / master
by Marek Vasut 15 Nov '11

15 Nov '11

Hi Albert, I chose a few significant patches that should make it to .12. The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783: da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100) are available in the git repository at: git://git.denx.de/u-boot-pxa.git master Marek Vasut (6): PXA: Drop csb226 and innokom boards (unmaintained) PXA: Cleanup serial_pxa PXA: vpac270: Enable the new generic MMC driver OneNAND: Add simple OneNAND SPL GCC4.6: Fix common/usb.c on xscale GCC4.6: Squash warnings in onenand_base.c MAINTAINERS | 5 - arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 ------- arch/arm/include/asm/arch-pxa/regs-uart.h | 109 ++++++ board/csb226/Makefile | 43 --- board/csb226/csb226.c | 166 ---------- board/csb226/flash.c | 368 --------------------- board/innokom/Makefile | 43 --- board/innokom/flash.c | 421 ------------------------ board/innokom/innokom.c | 190 ----------- board/vpac270/vpac270.c | 9 + boards.cfg | 2 - common/usb.c | 13 +- drivers/mtd/onenand/Makefile | 4 + drivers/mtd/onenand/onenand_base.c | 18 +- drivers/mtd/onenand/onenand_spl.c | 146 +++++++++ drivers/serial/serial_pxa.c | 464 +++++++++++---------------- include/configs/csb226.h | 506 ---------------------------- include/configs/innokom.h | 507 ----------------------------- include/configs/vpac270.h | 3 +- include/onenand_uboot.h | 3 + spl/Makefile | 1 + 21 files changed, 478 insertions(+), 2654 deletions(-) create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h delete mode 100644 board/csb226/Makefile delete mode 100644 board/csb226/csb226.c delete mode 100644 board/csb226/flash.c delete mode 100644 board/innokom/Makefile delete mode 100644 board/innokom/flash.c delete mode 100644 board/innokom/innokom.c create mode 100644 drivers/mtd/onenand/onenand_spl.c delete mode 100644 include/configs/csb226.h delete mode 100644 include/configs/innokom.h

2 1

[U-Boot] [GIT PULL] Pull request: u-boot-imx
by Stefano Babic 15 Nov '11

15 Nov '11

Hi Albert, please pull from u-boot-imx. The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783: da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master Fabio Estevam (5): qong: Use generic function for configuring GPR register mx31: Remove duplicate definition for GPR register mx31: Use proper IO accessor for GPR register mx31: Fix checkpatch warnings in generic.c m28evk: Fix comment about the number of RAM banks Marek Vasut (20): iMX28: Initial support for iMX28 CPU iMX28: Add SSP MMC driver FEC: Add support for iMX28 quirks iMX28: Add PINMUX control iMX28: Add I2C bus driver iMX28: Add GPIO control iMX28: Add SPI driver iMX28: Add APBH DMA driver iMX28: Add GPMI NAND driver iMX28: Add driver for internal RTC iMX28: Add image header generator tool iMX28: Add u-boot.sb target to Makefile iMX28: Add support for DENX M28EVK board M28: Add MMC SPL M28: Add doc/README.m28 documentation iMX28: Fix ARM vector handling M28: Add memory detection into SPL iMX28: Add USB and USB PHY register definitions iMX28: Add USB HOST driver M28EVK: Enable USB HOST support Stefano Babic (1): MX25: zmx25: GCC4.6 fix build warnings .gitignore | 1 + MAINTAINERS | 1 + Makefile | 5 + arch/arm/cpu/arm1136/mx31/generic.c | 11 +- arch/arm/cpu/arm926ejs/mx28/Makefile | 46 + arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++ arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 +++ arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 +++++ arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++ arch/arm/include/asm/arch-mx28/clock.h | 61 ++ arch/arm/include/asm/arch-mx28/dma.h | 170 ++++ arch/arm/include/asm/arch-mx28/gpio.h | 32 + arch/arm/include/asm/arch-mx28/imx-regs.h | 39 + arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++ arch/arm/include/asm/arch-mx28/iomux.h | 168 ++++ arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++++ arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++ arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++ arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++ arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++ arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++ arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++ arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++ arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284 +++++++++++++++++++++++++ arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++ arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++ arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++ arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++ arch/arm/include/asm/arch-mx28/regs-usb.h | 178 ++++ arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++ arch/arm/include/asm/arch-mx28/sys_proto.h | 32 + arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +- board/davedenx/qong/qong.c | 2 +- board/denx/m28evk/Makefile | 56 ++ board/denx/m28evk/m28_init.h | 41 + board/denx/m28evk/m28evk.c | 216 +++++ board/denx/m28evk/mem_init.c | 240 +++++ board/denx/m28evk/mmc_boot.c | 273 ++++++ board/denx/m28evk/power_init.c | 913 ++++++++++++++++++ board/denx/m28evk/start.S | 234 +++++ board/denx/m28evk/u-boot-spl.lds | 87 ++ board/denx/m28evk/u-boot.bd | 14 + board/syteco/zmx25/zmx25.c | 2 - boards.cfg | 1 + doc/README.m28 | 223 +++++ drivers/dma/Makefile | 1 + drivers/dma/apbh_dma.c | 691 +++++++++++++ drivers/gpio/Makefile | 1 + drivers/gpio/mxs_gpio.c | 136 +++ drivers/i2c/Makefile | 1 + drivers/i2c/mxs_i2c.c | 246 +++++ drivers/mmc/Makefile | 1 + drivers/mmc/mxsmmc.c | 351 +++++++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/mxs_nand.c | 1118 +++++++++++++++++++++ drivers/net/fec_mxc.c | 44 +- drivers/rtc/Makefile | 1 + drivers/rtc/mxsrtc.c | 86 ++ drivers/spi/Makefile | 1 + drivers/spi/mxs_spi.c | 186 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mxs.c | 154 +++ include/configs/m28evk.h | 303 ++++++ tools/.gitignore | 1 + tools/Makefile | 6 + tools/mxsboot.c | 684 +++++++++++++ 66 files changed, 12697 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c create mode 100644 arch/arm/include/asm/arch-mx28/clock.h create mode 100644 arch/arm/include/asm/arch-mx28/dma.h create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h create mode 100644 board/denx/m28evk/Makefile create mode 100644 board/denx/m28evk/m28_init.h create mode 100644 board/denx/m28evk/m28evk.c create mode 100644 board/denx/m28evk/mem_init.c create mode 100644 board/denx/m28evk/mmc_boot.c create mode 100644 board/denx/m28evk/power_init.c create mode 100644 board/denx/m28evk/start.S create mode 100644 board/denx/m28evk/u-boot-spl.lds create mode 100644 board/denx/m28evk/u-boot.bd create mode 100644 doc/README.m28 create mode 100644 drivers/dma/apbh_dma.c create mode 100644 drivers/gpio/mxs_gpio.c create mode 100644 drivers/i2c/mxs_i2c.c create mode 100644 drivers/mmc/mxsmmc.c create mode 100644 drivers/mtd/nand/mxs_nand.c create mode 100644 drivers/rtc/mxsrtc.c create mode 100644 drivers/spi/mxs_spi.c create mode 100644 drivers/usb/host/ehci-mxs.c create mode 100644 include/configs/m28evk.h create mode 100644 tools/mxsboot.c -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de =====================================================================

2 1

Re: [U-Boot] Using Micron (Numonyx) m28w640hcb with u-boot
by Gudjon I. Gudjonsson 15 Nov '11

15 Nov '11

Hi Vipin > > I have had a similar problem with spear3xx board. Basically, this flash > is write protected in hardware by default. It has to be specifically > made writable. Please define a flag CONFIG_SYS_FLASH_PROTECTION in your > config file. > Thanks a lot. This works like charm :) Now I have spent the whole day on trying to mount the device from Linux as a read/write partition but without luck. I can mount the partition but if I try to do some writing to it I get: Write clean marker to block at 0x00030000 failed: -30 ... repeated for all sector boundaries. If I reboot the device the partition is empty. Then I tried to use flash_eraseall but it fails as well # flash_eraseall -j /dev/mtd1 Erasing 64 Kibyte @ 0 -- 0 % complete. flash_eraseall: /dev/mtd1: MTD write failure: Read-only file system I tried to unlock the flash (using protect off) before booting Linux but without any success. I can't find any configuration option related to the NOR CFI flash in the spear3xx kernel configuration files. Do you have any useful hint on this as well? Regards Gudjon

2 2

[U-Boot] Dear Good Friend,
by Davis 15 Nov '11

15 Nov '11

Dear Good Friend, I am Dr.John Davis from Burkina Faso West Africa in banking institution; I have a transfer business deal to share with you. I need your full support to transfer the fixed balance deposits of Twenty Eight Million dollars (US$28MILLION) from my bank to any of your account as a foreign partner or a relative. Upon the receipt of your reply, I will indicate you on how to proceeds Regards Dr.John Davis

1 0

[U-Boot] MY DEAR PLEASE COME FOR MY RESCUE!
by miss bianca yak 15 Nov '11

15 Nov '11

Dearest One, I am writing this mail to you With due respect trust and humanity, i appeal to you to exercise a little patience and read through my letter i feel quite safe dealing with you in this important business having gone through your remarkable profile, honestly i am writing this email to you with pains, tears and sorrow from my heart, i will really like to have a good relationship with you and i have a special reason why i decided to contact you, i decided to contact you due to the urgency of my situation. My name is Miss. Bianca Justin Yak, 23yrs old female and I from South Sudan.My father was the former Minister for SPLA Affairs and Special Adviser to President Salva Kiir of South Sudan for Decentralization. My father Dr.Justin Yak, and my mother including other top Military officers and top government officials had been on board when the plane crashed on Friday May 02, 2008. I have chosen to contact you after my prayers and I believe that you will not betray my trust. But rather take me as your own sister. Though you may wonder why I am so soon revealing myself to you without knowing you, well,I will say that my mind convinced me that you are the true person to help me. More so, I will like to disclose much to you if you can help me to relocate to your country because my uncle have threaten to assassinate me. The amount is $5.6 Million and I have confirmed from the bank in Burkina Faso. You will also help me to place the money in a more profitable business venture in your Country. However, you will help by recommending a nice University in your country so that I can complete my studies. It is my intention to compensate you with 10% of the total money for your services and the balance shall be my capital in your establishment. As soon as I receive your interest in helping me, I will put things into action immediately. In the light of the above, I shall appreciate an urgent message indicating your ability and willingness to handle this transaction sincerely. Please do keep this only to your self. I beg you not to disclose it till i come over because I am affraid of my wicked uncle who has threatened to kill me. Sincerely yours, Miss Bianca justin yak

1 0

[U-Boot] [PATCHv2 0/2] omap3evm: Add support for EFI partitions
by Sanjeev Premi 15 Nov '11

15 Nov '11

After enabling CONFIG_EFI_PARTITION, following errors were noticed. part_efi.c: In function 'print_part_efi': part_efi.c:133:5: warning: passing argument 3 of 'is_gpt_valid' from incompatible pointer type part_efi.c:95:12: note: expected 'struct gpt_header *' but arg ument is of type 'struct gpt_header **' part_efi.c: In function 'get_partition_info_efi': part_efi.c:173:4: warning: passing argument 3 of 'is_gpt_valid ' from incompatible pointer type part_efi.c:95:12: note: expected 'struct gpt_header *' but arg ument is of type 'struct gpt_header **' part_efi.c: In function 'alloc_read_gpt_entries': part_efi.c:384:18: error: 'CONFIG_SYS_CACHELINE_SIZE' undeclar ed (first use in this function) part_efi.c:384:18: note: each undeclared identifier is reporte d only once for each function it appears in make[1]: *** [part_efi.o] Error 1 make[1]: Leaving directory `/home/premi/disk' make: *** [disk/libdisk.o] Error 2 Tested working via command "mmc part" on OMAP3EVM on MMC card with EFI partitions. Changes since v1: * Use ARCH_DMA_MINALIGN instead of CONFIG_SYS_CACHELINE_SIZE in disk/part_efi.c. * Removed (now) redundant definition of CONFIG_SYS_CACHELINE_SIZE from /include/configs/omap3_evm_common.h REF: http://lists.denx.de/pipermail/u-boot/2011-November/109895.html Sanjeev Premi (2): part_efi: Fix compile errors omap3evm: Add support for EFI partitions disk/part_efi.c | 6 +++--- include/configs/omap3_evm.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) Cc: Sandeep Paulraj <s-paulraj(a)ti.com>

1 2