July 2010 - U-Boot

[U-Boot] Atmel AT91 USB DFU and USB device port driver
by Krishna Pattabiraman 12 Feb '11

12 Feb '11

Hi All, I am currently developing a USB DFU feature for at91sam9263 board. I have to develop the driver for USB device port. I looked the uboot-usb git cdc branch it has a at91_udc.c driver it doesnt contain the udc_* api implementations. I found a earlier post where it was discussed. http://www.mail-archive.com/u-boot@lists.denx.de/msg08709.html Can any point give me a pointer to implement it or the implementations if exist. Bye, Krishna.

3 4

[U-Boot] [PATCH 0/5] New environment code
by Wolfgang Denk 17 Jan '11

17 Jan '11

The following patch series adds some utilities (qsort and hash table based database functions) and uses these to reimplement the code used for the internal handling of environment variables. Motivation: * Old environment code used a pessimizing implementation: - variable lookup used linear search => slow - changed/added variables were added at the end, i. e. most frequently used variables had the slowest access times => slow - each setenv() would calculate the CRC32 checksum over the whole environment block => slow * "redundant" envrionment was locked down to two copies * No easy way to implement features like "reset to factory defaults", or to select one out of several pre-defined (previously saved) sets of environment settings ("profiles") * No easy way to import or export environment settings ====================================================================== API Changes: - Variable names starting with '#' are no longer allowed I didn't find any such variable names being used; it is highly recommended to follow standard conventions and start variable names with an alphanumeric character - "printenv" will now print a backslash at the end of all but the last lines of a multi-line variable value. Multi-line variables have never been formally defined, allthough there is no reason not to use them. Now we define rules how to deal with them, allowing for import and export. - Function forceenv() and the related code in saveenv() was removed. At the moment this is causing build problems for the only user of this code (schmoogie - which has no entry in MAINTAINERS); may be fixed later by implementing the "env set -f" feature. Inconsistencies: - "printenv" will '\\'-escape the '\n' in multi-line variables, while "printenv var" will not do that. ====================================================================== Advantages: - "printenv" output much better readable (sorted) - faster! - extendable (additional variable properties can be added) - new, powerful features like "factory reset" or easy switching between several different environment settings ("profiles") Disadvantages: - Image size grows by typically 5...7 KiB (might shrink a bit again on systems with redundant environment with a following patch series) ====================================================================== Implemented: - env command with subcommands: - env print [arg ...] same as "printenv": print environment - env set [-f] name [arg ...] same as "setenv": set (and delete) environment variables ["-f" - force setting even for read-only variables - not implemented yet.] - end delete [-f] name not implemented yet ["-f" - force delete even for read-only variables] - env save same as "saveenv": save environment - env export [-t | -b | -c] addr [size] export internal representation (hash table) in formats usable for persistent storage or processing: -t: export as text format; if size is given, data will be padded with '\0' bytes; if not, one terminating '\0' will be added (which is included in the "filesize" setting so you can for exmple copy this to flash and keep the termination). -b: export as binary format (name=value pairs separated by '\0', list end marked by double "\0\0") -c: export as checksum protected environment format as used for example by "saveenv" command addr: memory address where environment gets stored size: size of output buffer With "-c" and size is NOT given, then the export command will format the data as currently used for the persistent storage, i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and prepend a valid CRC32 checksum and, in case of resundant environment, a "current" redundancy flag. If size is given, this value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32 checksum and redundancy flag will be inserted. With "-b" and "-t", always only the real data (including a terminating '\0' byte) will be written; here the optional size argument will be used to make sure not to overflow the user provided buffer; the command will abort if the size is not sufficient. Any remainign space will be '\0' padded. On successful return, the variable "filesize" will be set. Note that filesize includes the trailing/terminating '\0' byte(s). Usage szenario: create a text snapshot/backup of the current settings: => env export -t 100000 => era ${backup_addr} +${filesize} => cp.b 100000 ${backup_addr} ${filesize} Re-import this snapshot, deleting all other settings: => env import -d -t ${backup_addr} - env import [-d] [-t | -b | -c] addr [size] import external format (text or binary) into hash table, optionally deleting existing values: -d: delete existing environment before importing; otherwise overwrite / append to existion definitions -t: assume text format; either "size" must be given or the text data must be '\0' terminated -b: assume binary format ('\0' separated, "\0\0" terminated) -c: assume checksum protected environment format addr: memory address to read from size: length of input data; if missing, proper '\0' termination is mandatory - env default -f reset default environment: drop all environment settings and load default environment - env ask name [message] [size] same as "askenv": ask for environment variable - env edit name same as "editenv": edit environment variable - env run same as "run": run commands in an environment variable ====================================================================== TODO: - drop default env as implemented now; provide a text file based initialization instead (eventually using several text files to incrementally build it from common blocks) and a tool to convert it into a binary blob / object file. - It would be nice if we could add wildcard support for environment variables; this is needed for variable name auto-completion, but it would also be nice to be able to say "printenv ip*" or "printenv *addr*" - Some boards don't link any more due to the grown code size: AR405, CANBT, DU405, PMC440, canyonlands, sc3, sequoia, socrates. => cc: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com>, Stefan Roese <sr(a)denx.de>, Heiko Schocher <hs(a)denx.de> - Dropping forceenv() causes build problems on schmoogie => cc: Sergey Kubushyn <ksi(a)koi8.net> - Build tested on PPC and ARM only; runtime tested with NOR and NAND flash only => needs testing!! Wolfgang Denk (5): Add basic errno support. Add qsort - add support for sorting data arrays Add hash table support as base for new environment code Remove support for CONFIG_HAS_UID and "forceenv" command New implementation for internal handling of environment variables. README | 8 + board/zeus/zeus.c | 25 +- common/cmd_nvedit.c | 668 ++++++++++++++++++++++---------- common/command.c | 3 +- common/dlmalloc.c | 25 +- common/env_common.c | 125 +++--- common/env_dataflash.c | 114 ++++-- common/env_eeprom.c | 85 +++-- common/env_flash.c | 245 +++++++------ common/env_mgdisk.c | 33 +- common/env_nand.c | 188 +++++---- common/env_nowhere.c | 11 +- common/env_nvram.c | 46 ++- common/env_onenand.c | 65 ++-- common/env_sf.c | 132 ++++--- common/exports.c | 4 - include/_exports.h | 1 - include/common.h | 7 +- include/configs/MVSMR.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/environment.h | 5 +- include/errno.h | 9 + include/exports.h | 3 - include/search.h | 106 +++++ lib/Makefile | 3 + lib/errno.c | 1 + lib/hashtable.c | 735 +++++++++++++++++++++++++++++++++++ lib/qsort.c | 69 ++++ 28 files changed, 1998 insertions(+), 720 deletions(-) create mode 100644 include/errno.h create mode 100644 include/search.h create mode 100644 lib/errno.c create mode 100644 lib/hashtable.c create mode 100644 lib/qsort.c

7 51

[U-Boot] [PATCH] Clarify applicable licensing terms in COPYING file.
by Wolfgang Denk 09 Jan '11

09 Jan '11

Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- COPYING | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-) diff --git a/COPYING b/COPYING index f616ab9..9930863 100644 --- a/COPYING +++ b/COPYING @@ -1,4 +1,11 @@ - NOTE! This copyright does *not* cover the so-called "standalone" + U-Boot is free software. It is copyrighted by Wolfgang Denk and +many others who contributed code (see the actual source code for +details). You can redistribute U-Boot and/or modify it under the +terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 of the License (see text +below), or (at your option) any later version. + + NOTE! This license does *not* cover the so-called "standalone" applications that use U-Boot services by means of the jump table provided by U-Boot exactly for this purpose - this is merely considered normal use of U-Boot, and does *not* fall under the -- 1.6.2.5

2 5

[U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)
by Ricardo Ribalda Delgado 24 Dec '10

24 Dec '10

As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx ppc440 boards, this patch presents a common architecture for all the xilinx ppc405 boards. Any custom xilinx ppc405 board can be added very easily with no code duplicity. This patch also adds a simple generic board, that can be used on almost any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h This patch is prepared to work with the latest version of EDK (10.1) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda(a)uam.es> --- v2 Includes changes propossed by Stefan Roese -Remove unneeded init.S -PPC404 ->PPC405 v3 rebased to ppc4xx/master CREDITS | 1 + MAINTAINERS | 1 + Makefile | 16 ++ board/xilinx/ppc405-generic/.gitignore | 1 + board/xilinx/ppc405-generic/Makefile | 60 ++++++++ board/xilinx/ppc405-generic/config.mk | 25 ++++ board/xilinx/ppc405-generic/u-boot-ram.lds | 134 ++++++++++++++++++ board/xilinx/ppc405-generic/u-boot-rom.lds | 144 ++++++++++++++++++++ .../xilinx/ppc405-generic/xilinx_ppc405_generic.c | 59 ++++++++ board/xilinx/ppc405-generic/xparameters.h | 36 +++++ cpu/ppc4xx/start.S | 3 +- include/configs/xilinx-ppc405-generic.h | 58 ++++++++ include/configs/xilinx-ppc405.h | 126 +++++++++++++++++ 13 files changed, 663 insertions(+), 1 deletions(-) create mode 100644 board/xilinx/ppc405-generic/.gitignore create mode 100644 board/xilinx/ppc405-generic/Makefile create mode 100644 board/xilinx/ppc405-generic/config.mk create mode 100644 board/xilinx/ppc405-generic/u-boot-ram.lds create mode 100644 board/xilinx/ppc405-generic/u-boot-rom.lds create mode 100644 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c create mode 100644 board/xilinx/ppc405-generic/xparameters.h create mode 100644 include/configs/xilinx-ppc405-generic.h create mode 100644 include/configs/xilinx-ppc405.h diff --git a/CREDITS b/CREDITS index 3767322..9ddf0d2 100644 --- a/CREDITS +++ b/CREDITS @@ -407,6 +407,7 @@ N: Ricardo Ribalda Delgado E: ricardo.ribalda(a)uam.es D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval D: Virtex ppc440 generic architecture +D: Virtex ppc405 generic architecture W: http://www.ii.uam.es/~rribalda N: Stefan Roese diff --git a/MAINTAINERS b/MAINTAINERS index 60cb6a6..a5d1038 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -320,6 +320,7 @@ Ricardo Ribalda <ricardo.ribalda(a)uam.es> ml507 PPC440x5 v5fx30teval PPC440x5 xilinx-pp440-generic PPC440x5 + xilinx-pp405-generic PPC405 Stefan Roese <sr(a)denx.de> diff --git a/Makefile b/Makefile index fceb8a2..66922eb 100644 --- a/Makefile +++ b/Makefile @@ -1518,6 +1518,22 @@ sycamore_config: unconfig WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd +xilinx-ppc405-generic_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + +xilinx-ppc405-generic_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + xilinx-ppc440-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore new file mode 100644 index 0000000..b644f59 --- /dev/null +++ b/board/xilinx/ppc405-generic/.gitignore @@ -0,0 +1 @@ +config.tmp diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile new file mode 100644 index 0000000..b56bb49 --- /dev/null +++ b/board/xilinx/ppc405-generic/Makefile @@ -0,0 +1,60 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +endif + +INCS := +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) + +LIB = $(obj)lib$(BOARD).a + +COBJS += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk new file mode 100644 index 0000000..6d76755 --- /dev/null +++ b/board/xilinx/ppc405-generic/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds new file mode 100644 index 0000000..0004d61 --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-ram.lds @@ -0,0 +1,134 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds new file mode 100644 index 0000000..d2bac9f --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-rom.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c new file mode 100644 index 0000000..9bd1770 --- /dev/null +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <config.h> +#include <common.h> +#include <asm/processor.h> + +ulong __get_PCI_freq(void) +{ + return 0; +} + +ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq"))); + +int __board_pre_init(void) +{ + return 0; +} +int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); + +int __checkboard(void) +{ + puts("Xilinx PPC405 Generic Board\n"); + return 0; +} +int checkboard(void) __attribute__((weak, alias("__checkboard"))); + +phys_size_t __initdram(int board_type) +{ + return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, + CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); +} +phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); + +void __get_sys_info(sys_info_t *sysInfo) +{ + sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sysInfo->freqPCI = 0; + + return; +} +void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h new file mode 100644 index 0000000..e8e8ced --- /dev/null +++ b/board/xilinx/ppc405-generic/xparameters.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * based on xparameters-ml507.h by Xilinx + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef XPARAMETER_H +#define XPARAMETER_H + +#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 +#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 +#define XPAR_INTC_0_BASEADDR 0x81800000 +#define XPAR_SPI_0_BASEADDR 0x83400000 +#define XPAR_UARTLITE_0_BASEADDR 0x84000000 +#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 +#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 +#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_SPI_0_NUM_TRANSFER_BITS 8 + +#endif diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 31902a0..882ef21 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -918,7 +918,8 @@ _start: ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r4 -#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) +#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\ + && !defined (CONFIG_XILINX_405) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h new file mode 100644 index 0000000..5036c62 --- /dev/null +++ b/include/configs/xilinx-ppc405-generic.h @@ -0,0 +1,58 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt(a)team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_GEN_H +#define __CONFIG_GEN_H + +#include "../board/xilinx/ppc405-generic/xparameters.h" + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 256 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0x3F0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "xlx-ppc405:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=ppc405-flash" +#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" + +#include <configs/xilinx-ppc405.h> +#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h new file mode 100644 index 0000000..7458470 --- /dev/null +++ b/include/configs/xilinx-ppc405.h @@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt(a)team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* cpu parameter */ +#define CONFIG_4xx 1 +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + +/* memory map */ +#define CONFIG_SYS_SDRAM_BASE 0x0 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* u-boot commands configuration */ +#include <config_cmd_default.h> + +/*Misc*/ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + /* Initial Memory map for Linux */ +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SHIFT 2 + +/* stack */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_FLASH_CF 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_PROTECTION + +/* serial communication */ +#ifdef XPAR_UARTLITE_0_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR +#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif + +/* cmd config */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_IMLS + +#endif -- 1.5.6.5

4 5

[U-Boot] [STATUS] v2009.08-rc3 is out
by Wolfgang Denk 22 Dec '10

22 Dec '10

Hi everybody... v2009.08-rc3 has just been released. Please help testing, and submit fixes to the remaining problems. Things still missing should be submitted ASAP. * Many boards now throw the (expected) #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI messages. * ARM, MIPS and PowerPC: mostly compile clean; there are a few issues (mostly harmless) - responsibles have been notified Comments and fixes welcome. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de 'What shall we do?' said Twoflower. 'Panic?' said Rincewind hope- fully. He always held that panic was the best means of survival; back in the olden days, his theory went, people faced with hungry sabre- toothed tigers could be divided very simply in those who panicked and those who stood there saying 'What a magnificent brute!' or 'Here, pussy.' - Terry Pratchett, _The Light Fantastic_

5 10

[U-Boot] [PATCH] s3c44b0/start.S: should clear .bss
by Ender Dai 22 Dec '10

22 Dec '10

.bss section should be zeroed out after relocat to ram. Signed-off-by: Ender Dai <ender.dai(a)gmail.com> --- arch/arm/cpu/s3c44b0/start.S | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index fe6b349..08722c1 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -164,6 +164,15 @@ stack_setup: #endif sub sp, r0, #12 /* leave 3 words for abort-stack */ +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + blt clbss_l + ldr pc, _start_armboot _start_armboot: .word start_armboot -- 1.5.6

2 1

[U-Boot] [PATCH 2/4] s5p6442: Support onenand driver
by Joonyoung Shim 11 Dec '10

11 Dec '10

This patch is for onenand support of s5p6442 SoC. Cc: Minkyu Kang <mk7.kang(a)samsung.com> Cc: Kyungmin Park <kyungmin.park(a)samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim(a)samsung.com> --- drivers/mtd/onenand/samsung.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index f2be687..cbcf83b 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -67,7 +67,7 @@ do { \ #define MAP_01 (0x1 << 24) #define MAP_10 (0x2 << 24) #define MAP_11 (0x3 << 24) -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) #define MAP_00 (0x0 << 26) #define MAP_01 (0x1 << 26) #define MAP_10 (0x2 << 26) @@ -121,7 +121,7 @@ static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 12) | (fpa << 6) | (fsa << 4); } -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 13) | (fpa << 7) | (fsa << 5); @@ -614,7 +614,7 @@ void s3c_onenand_init(struct mtd_info *mtd) #if defined(CONFIG_S3C64XX) onenand->base = (void *)0x70100000; onenand->ahb_addr = (void *)0x20000000; -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) onenand->base = (void *)0xE7100000; onenand->ahb_addr = (void *)0xB0000000; #endif -- 1.6.3.3

2 2

[U-Boot] [PATCH v3] POST cleanup v3 (incremental)
by Michael Zaidman 06 Dec '10

06 Dec '10

Incremental patch. Should be applied above its v2: http://lists.denx.de/pipermail/u-boot/2010-April/070729.html (Sorry for inconvenience. I will use --in-reply-to option next time) In the patch: - Fix for hcu4 board; - post.h - preprocessor conditional inclusions optimization. Signed-off-by: Michael Zaidman <michael.zaidman(a)gmail.com> --- include/configs/hcu4.h | 2 +- include/post.h | 18 +++++------------- 2 files changed, 6 insertions(+), 14 deletions(-) diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index b01f8b1..26992e7 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -72,7 +72,7 @@ #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- * Serial Port diff --git a/include/post.h b/include/post.h index 296e1d5..939310b 100644 --- a/include/post.h +++ b/include/post.h @@ -35,31 +35,24 @@ #ifdef CONFIG_MPC5xxx #define _POST_WORD_ADDR (MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE) -#endif -#if defined(CONFIG_MPC821) || defined(CONFIG_MPC823) || \ - defined(CONFIG_MPC855) || defined(CONFIG_MPC855T)|| \ - defined(CONFIG_MPC850) || defined(CONFIG_MPC86x) +#elif defined(CONFIG_8xx) #define _POST_WORD_ADDR \ (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC8260 +#elif defined(CONFIG_MPC8260) #include <asm/cpm_8260.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC8360 +#elif defined(CONFIG_MPC8360) #include <asm/immap_qe.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC85xx +#elif defined (CONFIG_MPC85xx) #include <asm/cpm_85xx.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_4xx +#elif defined (CONFIG_4xx) #define _POST_WORD_ADDR \ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #endif @@ -67,7 +60,6 @@ #ifndef _POST_WORD_ADDR #error "_POST_WORD_ADDR currently not implemented for this platform!" #endif - #endif /* CONFIG_SYS_POST_WORD_ADDR */ static inline ulong post_word_load (void) -- 1.6.3.3

4 22

[U-Boot] [PATCH] pl01x: use C structs and readl/writel
by Rabin Vincent 30 Nov '10

30 Nov '10

Use C structs for registers, and use readl/writel instead of custom accessors. Acked-by: Michael Brandt <michael.brandt(a)stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent(a)stericsson.com> --- drivers/serial/serial_pl01x.c | 56 ++++++++++++++++++++++------------------ drivers/serial/serial_pl01x.h | 41 ++++++++++++++++-------------- 2 files changed, 53 insertions(+), 44 deletions(-) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index c645cef..d2609d6 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -29,12 +29,10 @@ #include <common.h> #include <watchdog.h> +#include <asm/io.h> #include "serial_pl01x.h" -#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val)) -#define IO_READ(addr) (*(volatile unsigned int *)(addr)) - /* * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 @@ -49,16 +47,22 @@ static void pl01x_putc (int portnum, char c); static int pl01x_getc (int portnum); static int pl01x_tstc (int portnum); +static struct pl01x_regs *pl01x_get_regs(int portnum) +{ + return (struct pl01x_regs *) port[portnum]; +} + #ifdef CONFIG_PL010_SERIAL int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int divisor; /* ** First, disable everything. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + writel(0, &regs->pl010_cr); /* ** Set baud rate @@ -89,20 +93,18 @@ int serial_init (void) divisor = UART_PL010_BAUD_38400; } - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM, - ((divisor & 0xf00) >> 8)); - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm); + writel(divisor & 0xff, &regs->pl010_lcrl); /* ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH, - (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh); /* ** Finally, enable the UART */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + writel(UART_PL010_CR_UARTEN, &regs->pl010_cr); return 0; } @@ -113,6 +115,7 @@ int serial_init (void) int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int temp; unsigned int divider; unsigned int remainder; @@ -121,7 +124,7 @@ int serial_init (void) /* ** First, disable everything. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0); + writel(0, &regs->pl011_cr); /* ** Set baud rate @@ -135,21 +138,20 @@ int serial_init (void) temp = (8 * remainder) / baudRate; fraction = (temp >> 1) + (temp & 1); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); + writel(divider, &regs->pl011_ibrd); + writel(fraction, &regs->pl011_fbrd); /* ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH, - (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); + writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN, + &regs->pl011_lcrh); /* ** Finally, enable the UART */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, - (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | - UART_PL011_CR_RXE)); + writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE, + &regs->pl011_cr); return 0; } @@ -187,28 +189,31 @@ void serial_setbrg (void) static void pl01x_putc (int portnum, char c) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + /* Wait until there is space in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF) + while (readl(&regs->fr) & UART_PL01x_FR_TXFF) WATCHDOG_RESET(); /* Send the character */ - IO_WRITE (port[portnum] + UART_PL01x_DR, c); + writel(c, &regs->dr); } static int pl01x_getc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); unsigned int data; /* Wait until there is data in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE) + while (readl(&regs->fr) & UART_PL01x_FR_RXFE) WATCHDOG_RESET(); - data = IO_READ (port[portnum] + UART_PL01x_DR); + data = readl(&regs->dr); /* Check for an error flag */ if (data & 0xFFFFFF00) { /* Clear the error */ - IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + writel(0xFFFFFFFF, &regs->ecr); return -1; } @@ -217,7 +222,8 @@ static int pl01x_getc (int portnum) static int pl01x_tstc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + WATCHDOG_RESET(); - return !(IO_READ (port[portnum] + UART_PL01x_FR) & - UART_PL01x_FR_RXFE); + return !(readl(&regs->fr) & UART_PL01x_FR_RXFE); } diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h index 5f20fdd..b670c24 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x.h @@ -29,10 +29,28 @@ * Definitions common to both PL010 & PL011 * */ -#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */ -#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */ -#define UART_PL01x_ECR 0x04 /* Error clear register (Write). */ -#define UART_PL01x_FR 0x18 /* Flag register (Read only). */ + +#ifndef __ASSEMBLY__ +/* + * We can use a combined structure for PL010 and PL011, because they overlap + * only in common registers. + */ +struct pl01x_regs { + u32 dr; /* 0x00 Data register */ + u32 ecr; /* 0x04 Error clear register (Write) */ + u32 pl010_lcrh; /* 0x08 Line control register, high byte */ + u32 pl010_lcrm; /* 0x0C Line control register, middle byte */ + u32 pl010_lcrl; /* 0x10 Line control register, low byte */ + u32 pl010_cr; /* 0x14 Control register */ + u32 fr; /* 0x18 Flag register (Read only) */ + u32 reserved; + u32 ilpr; /* 0x20 IrDA low-power counter register */ + u32 pl011_ibrd; /* 0x24 Integer baud rate register */ + u32 pl011_fbrd; /* 0x28 Fractional baud rate register */ + u32 pl011_lcrh; /* 0x2C Line control register */ + u32 pl011_cr; /* 0x30 Control register */ +}; +#endif #define UART_PL01x_RSR_OE 0x08 #define UART_PL01x_RSR_BE 0x04 @@ -50,14 +68,6 @@ * PL010 definitions * */ -#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */ -#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */ -#define UART_PL010_LCRL 0x10 /* Line control register, low byte. */ -#define UART_PL010_CR 0x14 /* Control register. */ -#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */ -#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */ -#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */ - #define UART_PL010_CR_LPE (1 << 7) #define UART_PL010_CR_RTIE (1 << 6) #define UART_PL010_CR_TIE (1 << 5) @@ -93,13 +103,6 @@ * PL011 definitions * */ -#define UART_PL011_IBRD 0x24 -#define UART_PL011_FBRD 0x28 -#define UART_PL011_LCRH 0x2C -#define UART_PL011_CR 0x30 -#define UART_PL011_IMSC 0x38 -#define UART_PL011_PERIPH_ID0 0xFE0 - #define UART_PL011_LCRH_SPS (1 << 7) #define UART_PL011_LCRH_WLEN_8 (3 << 5) #define UART_PL011_LCRH_WLEN_7 (2 << 5) -- 1.7.0

2 1

[U-Boot] [PATCH] add Xilinx_abort_fn to Xilinx_Spartan3_Slave_Serial_fns
by Wolfgang Wegner 30 Nov '10

30 Nov '10

Currently the hardware was left in an undefined state in case Spartan3 serial load failed. This patch adds Xilinx_abort_fn to give the board a possibility to clean up in this case. Signed-off-by: Wolfgang Wegner <w.wegner(a)astro-kom.de> --- All other FPGA drivers already support such an abort function - it seems Spartan3 serial load was a bit neglected (only discovered this because it messed up things on my board after a failed FPGA load). drivers/fpga/spartan3.c | 6 ++++++ include/spartan3.h | 1 + 2 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 7a89b56..1dd6f26 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -366,6 +366,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while (!(*fn->init) (cookie)); @@ -380,6 +382,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while ((*fn->init) (cookie)); @@ -394,6 +398,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) while DONE is low (inactive) */ if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { puts ("** CRC error during FPGA load.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return (FPGA_FAIL); } val = data [bytecount ++]; diff --git a/include/spartan3.h b/include/spartan3.h index d5a589d..0f0b400 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -58,6 +58,7 @@ typedef struct { Xilinx_wr_fn wr; Xilinx_post_fn post; Xilinx_bwr_fn bwr; /* block write function */ + Xilinx_abort_fn abort; } Xilinx_Spartan3_Slave_Serial_fns; /* Device Image Sizes -- 1.5.6.5

2 1