July 2010 - U-Boot

[U-Boot] [PATCH 1/7] ARM: Define __raw_readX and __raw_writeX
by Marek Vasut 03 Aug '10

03 Aug '10

These functions are undefined on ARM when using __io. These are the commonly used versions and can be redefined. Signed-off-by: Marek Vasut <marek.vasut(a)gmail.com> --- arch/arm/include/asm/io.h | 46 +++++++++++++++++++++++++++++++++++++++----- 1 files changed, 40 insertions(+), 6 deletions(-) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index e8f3eb1..ff1518e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -75,13 +75,47 @@ static inline phys_addr_t virt_to_phys(void * vaddr) #define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) -extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); -extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); -extern void __raw_writesl(unsigned int addr, const void *data, int longlen); +extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen) +{ + uint8_t *buf = (uint8_t *)data; + while(bytelen--) + __arch_putb(*buf++, addr); +} + +extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen) +{ + uint16_t *buf = (uint16_t *)data; + while(wordlen--) + __arch_putw(*buf++, addr); +} + +extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen) +{ + uint32_t *buf = (uint32_t *)data; + while(longlen--) + __arch_putl(*buf++, addr); +} -extern void __raw_readsb(unsigned int addr, void *data, int bytelen); -extern void __raw_readsw(unsigned int addr, void *data, int wordlen); -extern void __raw_readsl(unsigned int addr, void *data, int longlen); +extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen) +{ + uint8_t *buf = (uint8_t *)data; + while(bytelen--) + *buf++ = __arch_getb(addr); +} + +extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen) +{ + uint16_t *buf = (uint16_t *)data; + while(wordlen--) + *buf++ = __arch_getw(addr); +} + +extern inline void __raw_readsl(unsigned int addr, void *data, int longlen) +{ + uint32_t *buf = (uint32_t *)data; + while(longlen--) + *buf++ = __arch_getl(addr); +} #define __raw_writeb(v,a) __arch_putb(v,a) #define __raw_writew(v,a) __arch_putw(v,a) -- 1.7.1

2 9

[U-Boot] [RFC][PATCH 14/19] nand_fsl_nfc: get rid of local var
by Heiko Schocher 03 Aug '10

03 Aug '10

If we have -fPIC enabled, this var leads in one entry in the GOT. The result of this is that the image size is > 0x800. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- I tried to fix this in the u-boot.lds, but without success. If somebody knows, how to fix this without this patch, it would be great! nand_spl/nand_boot_fsl_nfc.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-) diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index 9720f6a..0543512 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -34,10 +34,9 @@ #include <asm/io.h> #include <fsl_nfc.h> -struct fsl_nfc_regs *nfc; - static void nfc_wait_ready(void) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; uint32_t tmp; while (!(readw(&nfc->nand_flash_config2) & NFC_INT)) @@ -51,6 +50,7 @@ static void nfc_wait_ready(void) void nfc_nand_init(void) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; #if defined(MXC_NFC_V1_1) int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; int config1; @@ -82,6 +82,7 @@ void nfc_nand_init(void) static void nfc_nand_command(unsigned short command) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; writew(command, &nfc->flash_cmd); writew(NFC_CMD, &nfc->nand_flash_config2); nfc_wait_ready(); @@ -89,6 +90,7 @@ static void nfc_nand_command(unsigned short command) static void nfc_nand_page_address(unsigned int page_address) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; unsigned int page_count; writew(0x00, &nfc->flash_add); @@ -122,6 +124,7 @@ static void nfc_nand_page_address(unsigned int page_address) static void nfc_nand_data_output(void) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; int config1 = readw(&nfc->nand_flash_config1); #ifdef NAND_MXC_2K_MULTI_CYCLE int i; @@ -150,11 +153,13 @@ static void nfc_nand_data_output(void) static int nfc_nand_check_ecc(void) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; return readw(&nfc->ecc_status_result); } static int nfc_read_page(unsigned int page_address, unsigned char *buf) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; int i; u32 *src; u32 *dst; @@ -186,6 +191,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf) static int is_badblock(int pagenumber) { + struct fsl_nfc_regs *nfc = (void *)NFC_BASE_ADDR; int page = pagenumber; u32 badblock; u32 *src; @@ -228,8 +234,6 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) unsigned int maxpages = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE; - nfc = (void *)NFC_BASE_ADDR; - nfc_nand_init(); /* Convert to page number */ @@ -279,8 +283,6 @@ void nand_boot(void) { __attribute__((noreturn)) void (*uboot)(void); - nfc = (void *)NFC_BASE_ADDR; - /* * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must * be aligned to full pages -- 1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 3

[U-Boot] [RFC][PATCH 08/19] i2c: fix command usage help
by Heiko Schocher 03 Aug '10

03 Aug '10

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- common/cmd_i2c.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index a1a84a1..91e60ae 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1297,6 +1297,11 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { cmd_tbl_t *c; + if (argc < 2) { + cmd_usage(cmdtp); + return 1; + } + /* Strip off leading 'i2c' command argument */ argc--; argv++; -- 1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 3

[U-Boot] [RFC][PATCH 02/19] relocation: fixup cmdtable
by Heiko Schocher 03 Aug '10

03 Aug '10

fixup_cmdtable() did all work for fixing up the cmdtable, if CONFIG_RELOC_FIXUP_WORKS is not defined. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- common/command.c | 33 +++++++++++++++++++++++++++++++++ include/command.h | 3 +++ 2 files changed, 36 insertions(+), 0 deletions(-) diff --git a/common/command.c b/common/command.c index 30a9801..7d0ac98 100644 --- a/common/command.c +++ b/common/command.c @@ -464,3 +464,36 @@ int cmd_get_data_size(char* arg, int default_size) return default_size; } #endif + +#if !defined(CONFIG_RELOC_FIXUP_WORKS) +DECLARE_GLOBAL_DATA_PTR; + +void fixup_cmdtable(cmd_tbl_t *cmdtp, int size) +{ + int i; + + if (gd->reloc_off == 0) + return; + + for (i = 0; i < size; i++) { + ulong addr; + + addr = (ulong) (cmdtp->cmd) + gd->reloc_off; + cmdtp->cmd = + (int (*)(struct cmd_tbl_s *, int, int, char * const []))addr; + addr = (ulong)(cmdtp->name) + gd->reloc_off; + cmdtp->name = (char *)addr; + if (cmdtp->usage) { + addr = (ulong)(cmdtp->usage) + gd->reloc_off; + cmdtp->usage = (char *)addr; + } +#ifdef CONFIG_SYS_LONGHELP + if (cmdtp->help) { + addr = (ulong)(cmdtp->help) + gd->reloc_off; + cmdtp->help = (char *)addr; + } +#endif + cmdtp++; + } +} +#endif diff --git a/include/command.h b/include/command.h index 9144d69..5c14616 100644 --- a/include/command.h +++ b/include/command.h @@ -125,4 +125,7 @@ cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage} #endif /* CONFIG_SYS_LONGHELP */ +#if !defined(CONFIG_RELOC_FIXUP_WORKS) +void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); +#endif #endif /* __COMMAND_H */ -- 1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 4

[U-Boot] [PATCH 2/2] s5p_goni: enable mmc0
by Minkyu Kang 03 Aug '10

03 Aug '10

Adds the board_mmc_init function and enable the mmc command Signed-off-by: Minkyu Kang <mk7.kang(a)samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- board/samsung/goni/goni.c | 37 +++++++++++++++++++++++++++++++++++++ include/configs/s5p_goni.h | 6 ++++++ 2 files changed, 43 insertions(+), 0 deletions(-) diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index e512c59..060d5d1 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -23,11 +23,18 @@ */ #include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> DECLARE_GLOBAL_DATA_PTR; +static struct s5pc110_gpio *s5pc110_gpio; + int board_init(void) { + /* Set Initial global variables */ + s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE; + gd->bd->bi_arch_number = MACH_TYPE_GONI; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -53,3 +60,33 @@ int checkboard(void) return 0; } #endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i; + + /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ + gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1); + + /* + * MMC0 GPIO + * GPG0[0] SD_0_CLK + * GPG0[1] SD_0_CMD + * GPG0[2] SD_0_CDn -> Not used + * GPG0[3:6] SD_0_DATA[0:3] + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPG0[0:6] special function 2 */ + gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2); + /* GPG0[0:6] pull disable */ + gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE); + /* GPG0[0:6] drv 4x */ + gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X); + } + + return s5p_mmc_init(0); +} +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 171ec94..b2bf96a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -67,6 +67,11 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 115200 +/* MMC */ +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_S5P_MMC 1 + /* It should define before config_cmd_default.h */ #define CONFIG_SYS_NO_FLASH 1 @@ -82,6 +87,7 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND #define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_MMC #define CONFIG_BOOTDELAY 1 #define CONFIG_ZERO_BOOTDELAY_CHECK -- 1.6.3.3

2 1

[U-Boot] Katmai flash configuration
by Wolfgang Denk 02 Aug '10

02 Aug '10

Hello Stefan, I have problems understanding the configuration in "include/configs/katmai.h". I read: 188 #define CONFIG_EXTRA_ENV_SETTINGS \ ... 193 "kernel_addr=fff10000\0" \ 194 "ramdisk_addr=fff20000\0" \ ... "kernel_addr" and "ramdisk_addr" are just 64 KiB apart; this is not even nearly enough for a Linux kernel image? And I don't see any definition of a "fdt_addr" variable anywhere? I think this needs cleanup? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Old programmers never die, they just branch to a new address.

2 1

[U-Boot] U-Boot: U-Boot 2010.06 doesn't boot from NAND Flash on AMCC Sequoia
by YURI ZHARIKOV 02 Aug '10

02 Aug '10

Dear all: We are Microelectronic Design and Applications (DMA) research group from University Carlos III of Madrid (Spain). At the moment, we are developing our own computational hardware platform, based on AMCC Sequoia board. In the past, we used U-Boot 1.3.3 with AMCC Sequoia board, and PPC booted fine from NAND Flash. At the moment, with the same configuration of bootstrap (533MHz, NAND Boot, 33Mhz PCI) we are trying to use the last version of U-Boot (2010.06) on AMCC Sequoia board. But PPC doesnt boot well, because there arent any information on HyperTerminal. We use ELDK 4.2 for compiling U-Boot 2010.06 nand image on the same way that we did it for U-Boot 1.3.3: $ export CROSS_COMPILE=ppc_4xxFP- $ PATH=$PATH:/opt/eldk/usr/bin:/opt/eldk/bin $ cd u-boot $ make distclean $ make sequoia_nand_config $ make all We boot PPC from NOR FLASH with previous version of U-Boot, and then we program NAND Flash memory with U-Boot 2010.06 nand image. We also use the same commands to do it that we used with U-Boot 1.3.3: => loadb 100000 /* transfer the U-Boot image */ => nand erase ENTER => nand write 100000 0 70000 ENTER After that, we put J2 jumper and select SW2 (OFF-OFF-OFF-OFF). Are we missing something? Thanks and Regards, ------------------------------------------ Yuri Zharikov Departamento de Tecnología Electrónica Universidad Carlos III de Madrid 1.2.A06 BIS E-mail: yzhariko(a)ing.uc3m.es ------------------------------------------

2 1

[U-Boot] gcc optimizing option cause printf() and others crash.why?
by yaojin liu 01 Aug '10

01 Aug '10

I use arm-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.gz to compile uboot1.3.4, and found that if I set OPTFLAGS to -O1,or O2, uboot will crash, usually in printf(). when i set to O3, it runs to prompt, but after several seconds(or minutes), the code is dead,and the console has no response. Os also has the problem,usually cannot run to main_loop(). How should i resolve this problem? 2010/7/29 yaojin liu <lanmanck(a)gmail.com> > hi,all: > I encounter strange thing again. :( > > it seems the vsprintf will overrun. have someone met before? > > To debug it ,I define a function writing character directly to the > register: "u_sendstring()" > > Here is the code for debugging printf: > > void printf(const char *fmt, ...) > > { > > va_list args; > > uint i; > > char printbuffer[CONFIG_SYS_PBSIZE]; > > va_start(args, fmt); > > /* For this to work, printbuffer must be larger than > > * anything we ever want to print. > > */ > > u_sendstring("printf2\n"); > > i = vsprintf(printbuffer, fmt, args); > > u_sendstring("printf3\n"); > > va_end(args); > > puts(printbuffer); > > } > > and here is the output: > > DM3xx=>>: DONEprintf2 > > DM3xx=>>: printf3 > > DM3xx=>>: U-Boot 2009.03 ( 2010 - 23:14:17) > > DM3xx=>>: I2C: ready > > DM3xx=>>: DRAM: printf2 > > DM3xx=>>: printf3 > > DM3xx=>>: 128printf2 > > DM3xx=>>: printf3 > > DM3xx=>>: MB > > DM3xx=>>: NAND: board_nand_init end > > DM3xx=>>: nand_scan1 > > DM3xx=>>: nand_scan_ident1 > > DM3xx=>>: nand_scan_ident2 > > DM3xx=>>: nand_get_flash_type1 > > DM3xx=>>: nand_get_flash_type2 > > DM3xx=>>: nand_get_flash_type4 > > DM3xx=>>: printf2n BOOTME > > DM3xx=>>: BOOTME > > DM3xx=>>: BOOTME > > DM3xx=>>: BOOTME > > > /////////////////////// weill, you can see that the first string will > output correctly,such as "128" "MB", but when it ran > to nand_get_flash_type(), the chip reboot. > > static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, > struct nand_chip *chip, int busw, int *maf_id) > > { > > struct nand_flash_dev *type = NULL; > > int i, dev_id, maf_idx; > > int tmp_id, tmp_manf; > > /* Select the device */ > > chip->select_chip(mtd, 0); > > u_sendstring("nand_get_flash_type1\n"); > > ..... > > u_sendstring("nand_get_flash_type4\n"); > > printk("NAND device: Manufacturer ID:" > > " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, > > nand_manuf_ids[maf_idx].name, type->name); > > u_sendstring("nand_get_flash_type5\n"); > > return type; > > } > > printk is just printf. So as i describe above, the code ran to vsprintf and > no respond anymore. > How could this happen? Is it another hardware bug? > >

3 4

[U-Boot] [PATCH 00/28] Support for SPEAr13xx boards added
by Vipin KUMAR 01 Aug '10

01 Aug '10

The following patch-set adds the support for the following 1. SPEAr13xx boards (SPEAr1300 and SPEAr1310) 2. Addition of High speed support for USB device for usbtty framework 3. Miscellneous fixes in Network and FSMC (NAND controller) drivers Please consider the patch-set for inclusion in the mainline Please make sure that the following patches can be applied only after the following Network driver patch which Ben has already accepted in his tree 5b1b1883ffcb75de71a0b4e66b279c88ae1e15fc : SPEAr : Network driver support added Regards Vipin Armando Visconti (1): SPEAr1300: Workaround the UHC problem (issue #101435) Vipin KUMAR (26): change_bit routine defined SPEAr : SMI erase and write timeouts increased SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET SPEAr : Reducing the max RAM size to 128MB SPEAr : Basic arch related support added for SPEAr SoCs SPEAr : Network support configured for spear SoCs SPEAr : macb driver support added for spear310 and spear320 SPEAr : FSMC driver support added SPEAr : Configuring FSMC driver for NAND interface SPEAr : i2c driver moved completely into drivers/i2c SPEAr : smi driver moved completely into drivers/mtd SPEAr : USB Device Controller driver support added SPEAr : Supporting various configurations for spear3xx and spear6xx boards SPEAr : Basic spear1300 architecture support added SPEAr : spear1300 SoC support added SPEAr : Removing extraneous code SPEAr : USB device controller bugfixes SPEAr : Network driver fixes. SPEAr : Changing the default environment variable bootargs Enable high speed support for usb device framework and usbtty SPEAr : High speed support for designware peripheral SPEAr : Enable usb device high speed support SPEAr : Network support configuration SPEAr : Enabling GPT clock explicitly SPEAr : smi_init moved to board_init SPEAr : Ethernet issue workaround is not needed when uboot is acting as flashing Vipin Kumar (1): SPEAr1310 : spear1310 support added MAINTAINERS | 2 + MAKEALL | 2 + Makefile | 41 ++- arch/arm/cpu/arm926ejs/spear/Makefile | 3 +- arch/arm/cpu/arm926ejs/spear/cpu.c | 84 ++++ arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 +++ arch/arm/cpu/arm_cortexa8/spear13xx/ca9_ltimer.c | 136 +++++++ arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 ++++++ arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 133 +++++++ .../arm/cpu/arm_cortexa8/spear13xx/reset.c | 40 +- .../arm/include/asm/arch-spear/clk.h | 26 +- arch/arm/include/asm/arch-spear/hardware.h | 16 +- arch/arm/include/asm/arch-spear/spr_misc.h | 7 + .../arm/include/asm/arch-spear13xx/ca9_ltimer.h | 36 +- .../arm/include/asm/arch-spear13xx/hardware.h | 35 +- arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++++++ .../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +- arch/arm/include/asm/bitops.h | 11 +- board/spear/common/Makefile | 12 +- .../spear/common/spr13xx_lowlevel_init.S | 35 +- .../spear/common/spr13xx_misc.c | 48 +-- board/spear/common/spr_misc.c | 32 ++- board/spear/spear1300/Makefile | 51 +++ board/spear/spear1300/config.mk | 28 ++ board/spear/spear1300/spear1300.c | 70 ++++ board/spear/spear1310/Makefile | 51 +++ board/spear/spear1310/config.mk | 28 ++ board/spear/spear1310/spear1310.c | 70 ++++ board/spear/spear300/config.mk | 11 - board/spear/spear300/spear300.c | 18 +- board/spear/spear310/config.mk | 11 - board/spear/spear310/spear310.c | 35 ++- board/spear/spear320/config.mk | 11 - board/spear/spear320/spear320.c | 23 +- board/spear/spear600/config.mk | 11 - board/spear/spear600/spear600.c | 18 +- doc/README.spear | 51 ++- drivers/i2c/Makefile | 2 +- drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +- .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +- drivers/mtd/Makefile | 2 +- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/fsmc_nand.c | 401 ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c | 124 ------ drivers/mtd/{spr_smi.c => st_smi.c} | 61 ++-- drivers/net/designware.c | 8 +- drivers/net/designware.h | 2 +- drivers/serial/usbtty.h | 4 +- drivers/usb/gadget/Makefile | 2 +- drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 123 ++++--- include/configs/spear-common.h | 50 ++- include/configs/spear13xx_evb.h | 225 +++++++++++ include/configs/{spear3xx.h => spear3xx_evb.h} | 31 ++ include/configs/{spear6xx.h => spear6xx_evb.h} | 12 + include/linux/mtd/fsmc_nand.h | 108 ++++++ .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +- include/usb/{spr_udc.h => designware_udc.h} | 9 +- 57 files changed, 2424 insertions(+), 460 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/ca9_ltimer.c create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c copy include/configs/spear6xx.h => arch/arm/cpu/arm_cortexa8/spear13xx/reset.c (55%) mode change 100644 => 100755 copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear/clk.h (64%) copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/ca9_ltimer.h (55%) copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/hardware.h (54%) create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%) copy include/configs/spear6xx.h => board/spear/common/spr13xx_lowlevel_init.S (56%) rename arch/arm/include/asm/arch-spear/spr_nand.h => board/spear/common/spr13xx_misc.c (52%) create mode 100644 board/spear/spear1300/Makefile create mode 100644 board/spear/spear1300/config.mk create mode 100644 board/spear/spear1300/spear1300.c create mode 100644 board/spear/spear1310/Makefile create mode 100644 board/spear/spear1310/config.mk create mode 100644 board/spear/spear1310/spear1310.c rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%) rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%) create mode 100644 drivers/mtd/nand/fsmc_nand.c delete mode 100644 drivers/mtd/nand/spr_nand.c rename drivers/mtd/{spr_smi.c => st_smi.c} (94%) rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (90%) create mode 100644 include/configs/spear13xx_evb.h rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%) rename include/configs/{spear6xx.h => spear6xx_evb.h} (84%) create mode 100644 include/linux/mtd/fsmc_nand.h rename arch/arm/include/asm/arch-spear/spr_smi.h => include/linux/mtd/st_smi.h (95%) rename include/usb/{spr_udc.h => designware_udc.h} (97%)

4 45

[U-Boot] [PATCH 0/5] FAT32: "Superfloppy" format and other fixes
by Wolfgang Denk 01 Aug '10

01 Aug '10

"Superfloppy" format (in U-Boot called PBR) did not work for FAT32 due to several errors; some errors appaeared only in certain configurations (like directories with more than 128 entries, etc.). These patches are supposed to fix these issues. Wolfgang Denk (5): usb_storage.c: initialize device type FAT32: fix support for superfloppy-format (PBR) FAT32: fix broken root directory handling. usb_storage.c: change progress output in debug() message fs/fat: Big code cleanup. common/cmd_fat.c | 210 ++-------- common/usb_storage.c | 9 +- disk/part_dos.c | 4 +- disk/part_dos.h | 3 +- fs/fat/fat.c | 1143 ++++++++++++++++++++++++++++---------------------- fs/fat/file.c | 14 +- include/fat.h | 63 ++-- 7 files changed, 717 insertions(+), 729 deletions(-) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Misquotation is, in fact, the pride and privilege of the learned. A widely-read man never quotes accurately, for the rather obvious reason that he has read too widely. - Hesketh Pearson _Common Misquotations_ introduction

2 12