- serial console in PSC1
- 128MiB DRAM
- 32MiB Flash
- FEC Ethernet
- 2 I2C busses
- FPGA on CS3
- IDE
- VGA SMI501
Signed-off-by: Heiko Schocher <hs(a)denx.de>
---
MAINTAINERS | 1 +
board/tqc/tqm5200/tqm5200.c | 170 ++++++++++++++++++++++++++++++++++++++++++-
boards.cfg | 1 +
include/configs/TQM5200.h | 26 ++++--
include/configs/charon.h | 80 ++++++++++++++++++++
5 files changed, 268 insertions(+), 10 deletions(-)
create mode 100644 include/configs/charon.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 986e0dc..fc6bae9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -414,6 +414,7 @@ Georg Schardt <schardt(a)team-ctech.de>
Heiko Schocher <hs(a)denx.de>
+ charon MPC5200
ids8247 MPC8247
jupiter MPC5200
kmeter1 MPC8360
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index 263a2af..419dec0 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -54,6 +54,47 @@ DECLARE_GLOBAL_DATA_PTR;
void ps2mult_early_init(void);
#endif
+#if defined(CONFIG_VIDEO)
+/*
+ * EDID block has been generated using Phoenix EDID Designer 1.3.
+ * This tool creates a text file containing:
+ *
+ * EDID BYTES:
+ *
+ * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
+ * ------------------------------------------------
+ * 00 | 00 FF FF FF FF FF FF 00 04 21 00 00 00 00 00 00
+ * 10 | 01 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00
+ * 20 | 00 00 00 21 00 00 01 01 01 01 01 01 01 01 01 01
+ * 30 | 01 01 01 01 01 01 64 00 00 00 00 00 00 00 00 00
+ * 40 | 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00
+ * 50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00
+ * 60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10
+ * 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17
+ *
+ * Then this data has been manually converted to the char
+ * array below.
+ */
+static unsigned char edid_buf[128] = {
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+ 0x04, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x64, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17,
+};
+#endif
+
#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
@@ -251,6 +292,8 @@ int checkboard (void)
# define CARRIER_NAME "CAM5200"
#elif defined(CONFIG_FO300)
# define CARRIER_NAME "FO300"
+#elif defined(CONFIG_CHARON)
+# define CARRIER_NAME "CHARON"
#else
# error "UNKNOWN"
#endif
@@ -429,6 +472,111 @@ int board_early_init_f (void)
}
#endif /* CONFIG_FO300 */
+#if defined(CONFIG_CHARON)
+#include <i2c.h>
+#include <asm/io.h>
+
+/* The TFP410 registers */
+#define TFP410_REG_VEN_ID_L 0x00
+#define TFP410_REG_VEN_ID_H 0x01
+#define TFP410_REG_DEV_ID_L 0x02
+#define TFP410_REG_DEV_ID_H 0x03
+#define TFP410_REG_REV_ID 0x04
+
+#define TFP410_REG_CTL_1_MODE 0x08
+#define TFP410_REG_CTL_2_MODE 0x09
+#define TFP410_REG_CTL_3_MODE 0x0A
+
+#define TFP410_REG_CFG 0x0B
+
+#define TFP410_REG_DE_DLY 0x32
+#define TFP410_REG_DE_CTL 0x33
+#define TFP410_REG_DE_TOP 0x34
+#define TFP410_REG_DE_CNT_L 0x36
+#define TFP410_REG_DE_CNT_H 0x37
+#define TFP410_REG_DE_LIN_L 0x38
+#define TFP410_REG_DE_LIN_H 0x39
+
+#define TFP410_REG_H_RES_L 0x3A
+#define TFP410_REG_H_RES_H 0x3B
+#define TFP410_REG_V_RES_L 0x3C
+#define TFP410_REG_V_RES_H 0x3D
+
+static int tfp410_read_reg(int reg, uchar *buf)
+{
+ if (i2c_read(CONFIG_SYS_TFP410_ADDR, reg, 1, buf, 1) != 0) {
+ puts ("Error reading the chip.\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int tfp410_write_reg(int reg, uchar buf)
+{
+ if (i2c_write(CONFIG_SYS_TFP410_ADDR, reg, 1, &buf, 1) != 0) {
+ puts ("Error writing the chip.\n");
+ return 1;
+ }
+ return 0;
+}
+
+typedef struct _tfp410_config {
+ int reg;
+ uchar val;
+}TFP410_CONFIG;
+
+static TFP410_CONFIG tfp410_configtbl[] = {
+ {TFP410_REG_CTL_1_MODE, 0x37},
+ {TFP410_REG_CTL_2_MODE, 0x20},
+ {TFP410_REG_CTL_3_MODE, 0x80},
+ {TFP410_REG_DE_DLY, 0x90},
+ {TFP410_REG_DE_CTL, 0x00},
+ {TFP410_REG_DE_TOP, 0x23},
+ {TFP410_REG_DE_CNT_H, 0x02},
+ {TFP410_REG_DE_CNT_L, 0x80},
+ {TFP410_REG_DE_LIN_H, 0x01},
+ {TFP410_REG_DE_LIN_L, 0xe0},
+ {-1, 0},
+};
+
+static int charon_last_stage_init(void)
+{
+ volatile struct mpc5xxx_lpb *lpb =
+ (struct mpc5xxx_lpb *) MPC5XXX_LPB;
+ int oldbus = i2c_get_bus_num();
+ uchar buf;
+ int i = 0;
+
+ i2c_set_bus_num(CONFIG_SYS_TFP410_BUS);
+
+ /* check version */
+ if (tfp410_read_reg(TFP410_REG_DEV_ID_H, &buf) != 0)
+ return -1;
+ if (!(buf & 0x04))
+ return -1;
+ if (tfp410_read_reg(TFP410_REG_DEV_ID_L, &buf) != 0)
+ return -1;
+ if (!(buf & 0x10))
+ return -1;
+ /* OK, now init the chip */
+ while (tfp410_configtbl[i].reg != -1) {
+ int ret;
+
+ ret = tfp410_write_reg(tfp410_configtbl[i].reg,
+ tfp410_configtbl[i].val);
+ if (ret != 0)
+ return -1;
+ i++;
+ }
+ printf("TFP410 initialized.\n");
+ i2c_set_bus_num(oldbus);
+
+ /* set deadcycle for cs3 to 0 */
+ setbits_be32(&lpb->cs_deadcycle, 0xffffcfff);
+ return 0;
+}
+#endif
+
int last_stage_init (void)
{
/*
@@ -530,6 +678,9 @@ int last_stage_init (void)
#endif
#endif /* !CONFIG_TQM5200S */
+#if defined(CONFIG_CHARON)
+ charon_last_stage_init();
+#endif
return 0;
}
@@ -625,8 +776,12 @@ void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || \
+ defined(CONFIG_FO300) || defined(CONFIG_CHARON)
} else if (line_number == 2) {
+#if defined (CONFIG_CHARON)
+ strcpy (info, " on a CHARON carrier board");
+#endif
#if defined (CONFIG_STK52XX)
strcpy (info, " on a STK52xx carrier board");
#endif
@@ -726,9 +881,22 @@ int board_get_height (void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+#if defined(CONFIG_VIDEO)
+ fdt_add_edid(blob, "smi,sm501", edid_buf);
+#endif
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#if defined(CONFIG_RESET_PHY_R)
+#include <miiphy.h>
+
+void reset_phy(void)
+{
+ /* init Micrel KSZ8993 PHY */
+ miiphy_write("FEC", CONFIG_PHY_ADDR, 0x01, 0x09);
+}
+#endif
+
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in FEC comes first */
diff --git a/boards.cfg b/boards.cfg
index 6da9959..f76fb89 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -294,6 +294,7 @@ pcm030_LOWBOOT powerpc mpc5xxx pcm030 phytec
aev powerpc mpc5xxx tqm5200 tqc
cam5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B
cam5200_niosflash powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH
+charon powerpc mpc5xxx tqm5200 tqc - charon
fo300 powerpc mpc5xxx tqm5200 tqc - TQM5200:FO300
MiniFAP powerpc mpc5xxx tqm5200 tqc - TQM5200:MINIFAP
TB5200 powerpc mpc5xxx tqm5200 tqc
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index c2f6b8a..27813f1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -49,7 +49,8 @@
#endif
/* On a Cameron or on a FO300 board or ... */
-#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) \
+ && !defined(CONFIG_CHARON)
#define CONFIG_STK52XX 1 /* ... on a STK52XX board */
#endif
@@ -79,7 +80,7 @@
/* switch is open */
#endif /* CONFIG_FO300 */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_CHARON)
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
@@ -92,7 +93,7 @@
* 0x40000000 - 0x4fffffff - PCI Memory
* 0x50000000 - 0x50ffffff - PCI IO Space
*/
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_CHARON)
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
@@ -140,7 +141,8 @@
#define CONFIG_ISO_PARTITION
/* USB */
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) || \
+ defined(CONFIG_CHARON)
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE
@@ -204,13 +206,15 @@
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
#endif
-#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || \
+ defined(CONFIG_FO300) || defined(CONFIG_CHARON)
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#endif
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) || \
+ defined(CONFIG_CHARON)
#define CONFIG_CFG_USB
#define CONFIG_CFG_FAT
#endif
@@ -291,7 +295,9 @@
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
"console=${console},${baudrate}\0" \
- "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "flash_self_old=sete console ttyS0; " \
+ "run ramargs addip addcons addmtd; " \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
@@ -303,7 +309,7 @@
"sete console ttyS0; run nfsargs addip addcons;bootm\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"tftp ${fdt_addr_r} ${fdt_file}; " \
- "run nfsargs addip addcons; " \
+ "run nfsargs addip addcons addmtd; " \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
@@ -420,7 +426,7 @@
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nor0=TQM5200-0"
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_CHARON)
# if defined(CONFIG_TQM5200_B)
# if defined(CONFIG_SYS_LOWBOOT)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \
@@ -566,6 +572,7 @@
* use PSC1: Bits 29-31 (mask: 0x00000007):
* 100 -> UART (on all boards).
*/
+#if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
#if defined (CONFIG_MINIFAP)
# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004
#elif defined (CONFIG_STK52XX)
@@ -585,6 +592,7 @@
#else /* TMQ5200 Inbetriebnahme-Board */
# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004
#endif
+#endif
/*
* RTC configuration
diff --git a/include/configs/charon.h b/include/configs/charon.h
new file mode 100644
index 0000000..80a273c
--- /dev/null
+++ b/include/configs/charon.h
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de.
+ *
+ * (C) Copyright 2004-2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause(a)tqs.de
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs(a)denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_CHARON_H
+#define __CONFIG_CHARON_H
+
+#define CONFIG_CHARON
+#define CONFIG_HOSTNAME charon
+
+#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414
+
+/* include common defines/options for TQM52xx boards */
+#include "TQM5200.h"
+
+/* defines special on charon board */
+#undef CONFIG_RTC_MPC5200
+#undef CONFIG_CMD_DATE
+
+#undef CUSTOM_ENV_SETTINGS
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=/tftpboot/charon/uImage\0" \
+ "fdt_file=/tftpboot/charon/charon.dtb\0" \
+ "u-boot=/tftpboot/charon/u-boot.bin\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"
+
+
+/* additional features on charon board */
+#define CONFIG_RESET_PHY_R
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_I2C_MULTI_BUS
+
+#define CONFIG_SYS_TFP410_ADDR 0x38
+#define CONFIG_SYS_TFP410_BUS 0
+
+/*
+ * FPGA configuration
+ */
+#define CONFIG_SYS_CS3_START 0xE8000000
+#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */
+
+/*
+ * CS3 Config Register Init:
+ * CS3 Enabled
+ * AddrBus: 8bits
+ * DataBus: 4bytes
+ * Multiplexed: Yes
+ * MuxBank: 00
+ */
+#define CONFIG_SYS_CS3_CFG 0x00009310
+
+#endif /* __CONFIG_CHARON_H */
--
1.7.2.3
