October 2009 - U-Boot

[U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]
by Remy Bohmer 01 Feb '10

01 Feb '10

This is version 2 of these series! Only patch 1 of 2 has changed, some pedantic Coding Style issues updated that were not detected by Linux/scripts/checkpatch.pl. The USB OHCI init procedure sets the maximum message length the wrong way. A max of 64 bits should not be done by writing '64' in maxpacketsize, but '3'. While fixing this problem it turned out that there is more wrong here in this code it turned out that the wrong bits were checked to determine if the pipe was of type PIPE_INTERRUPT. This series fixes those errors also. I made it 2 seperate patches. The 1st of this series is fully tested and correct on at least the AT91SAM9261 cores. The 2nd patch, however, is created by search-for-the-same-errors-and-replace. I am not able to test that patch, I do not have the boards, so that needs to be done by others or by review. It is clear that code there is buggy in the first place. These patches require my previous series called 'Improve stability USB memory sticks for the common OHCI USB layer.' to be applied before this series. So they should apply on the u-boot-usb git tree. --> git://git.denx.de/u-boot-usb.git I want to mention also, that everytime I look deeper into this code, I find new bugs. It appears that several parts of this code is written with interrupt handling in mind, while we have no interrupt handling at all. Assumptions are done that a interrupt handler does things asynchronous, causing long loops that have no real use at all... So, no guarantees that _all_ problems are solved by now... --

4 8

[U-Boot] [RFC PATCH] add ability to handle compressed images to imxtract
by Wolfgang Wegner 26 Jan '10

26 Jan '10

imxtract currently can not handle compressed images. This patch adds handling for bzip2 and zip compression. In both cases, a destination address has to be specified for extraction. Signed-off-by: Wolfgang Wegner <w.wegner(a)astro-kom.de> --- common/cmd_ximg.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 77 insertions(+), 5 deletions(-) diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index 5593b2d..e6eb336 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -31,8 +31,20 @@ #include <common.h> #include <command.h> #include <image.h> +#include <watchdog.h> +#include <u-boot/zlib.h> +#if defined(CONFIG_BZIP2) +#include <bzlib.h> +#endif #include <asm/byteorder.h> +/* there is no prototype in zlib.h */ +int gunzip (void *, int, unsigned char *, unsigned long *); + +#ifndef CFG_XIMG_LEN +#define CFG_XIMG_LEN 0x800000 /* use 8MByte as default max gunzip size */ +#endif + int do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { @@ -50,6 +62,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) const void *fit_data; size_t fit_len; #endif + uint unc_len = CFG_XIMG_LEN; + uint8_t comp; verify = getenv_yesno ("verify"); @@ -92,8 +106,9 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } - if (image_get_comp (hdr) != IH_COMP_NONE) { - printf("Wrong Compression Type for %s command\n", + comp = image_get_comp (hdr); + if ((comp != IH_COMP_NONE) && (argc < 4)) { + printf("Must specify load address for %s command with compressed image\n", cmdtp->name); return 1; } @@ -138,8 +153,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } - if (fit_image_check_comp (fit_hdr, noffset, IH_COMP_NONE)) { - printf("Wrong Compression Type for %s command\n", + if ((fit_image_check_comp (fit_hdr, noffset, IH_COMP_NONE)) && (argc < 4)) { + printf("Must specify load address for %s command with compressed image\n", cmdtp->name); return 1; } @@ -158,6 +173,11 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } + if (fit_image_get_comp (fit_hdr, noffset, &comp)) { + puts ("Could not find script subimage compression type\n"); + return 1; + } + data = (ulong)fit_data; len = (ulong)fit_len; break; @@ -168,7 +188,59 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } if (argc > 3) { - memcpy((char *) dest, (char *) data, len); + switch (comp) { + case IH_COMP_NONE: +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + { + size_t l = len; + void *to = (void *) dest; + void *from = (void *)data; + + printf (" Loading part %d ... ", part); + + while (l > 0) { + size_t tail = (l > CHUNKSZ) ? CHUNKSZ : l; + WATCHDOG_RESET(); + memmove (to, from, tail); + to += tail; + from += tail; + l -= tail; + } + } +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + memmove ((char *) dest, (char *)data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + break; + case IH_COMP_GZIP: + printf (" Uncompressing part %d (len %d) ... ", part, len); + if (gunzip ((void *) dest, unc_len, + (uchar *) data, &len) != 0) { + puts ("GUNZIP ERROR - image not loaded\n"); + return 1; + } + break; +#if defined(CONFIG_BZIP2) + case IH_COMP_BZIP2: + printf (" Uncompressing part %d ... ", part); + /* + * If we've got less than 4 MB of malloc() space, + * use slower decompression algorithm which requires + * at most 2300 KB of memory. + */ + i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load), + &unc_len, (char *)data, len, + CFG_MALLOC_LEN < (4096 * 1024), 0); + if (i != BZ_OK) { + printf ("BUNZIP2 ERROR %d - image not loaded\n", i); + return 1; + } + break; +#endif /* CONFIG_BZIP2 */ + default: + printf ("Unimplemented compression type %d\n", comp); + return 1; + } + puts ("OK\n"); } sprintf(pbuf, "%8lx", data); -- 1.5.6.5

3 5

[U-Boot] [PATCH][RFC] bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
by Kumar Gala 26 Jan '10

26 Jan '10

Added the ability to config out bootm support for Linux, NetBSD, RTEMS Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- Looking for suggestions on how to deal with enabling LINUX, NETBSD, and RTEMS. common/cmd_bootm.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 1b2dfc4..47f9b45 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -103,13 +103,23 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); typedef int boot_os_fn (int flag, int argc, char *argv[], bootm_headers_t *images); /* pointers to os/initrd/fdt */ +#define CONFIG_BOOTM_LINUX 1 +#define CONFIG_BOOTM_NETBSD 1 +#define CONFIG_BOOTM_RTEMS 1 + +#ifdef CONFIG_BOOTM_LINUX extern boot_os_fn do_bootm_linux; +#endif +#ifdef CONFIG_BOOTM_NETBSD static boot_os_fn do_bootm_netbsd; +#endif #if defined(CONFIG_LYNXKDI) static boot_os_fn do_bootm_lynxkdi; extern void lynxkdi_boot (image_header_t *); #endif +#ifdef CONFIG_BOOTM_RTEMS static boot_os_fn do_bootm_rtems; +#endif #if defined(CONFIG_CMD_ELF) static boot_os_fn do_bootm_vxworks; static boot_os_fn do_bootm_qnxelf; @@ -121,12 +131,18 @@ static boot_os_fn do_bootm_integrity; #endif boot_os_fn * boot_os[] = { +#ifdef CONFIG_BOOTM_LINUX [IH_OS_LINUX] = do_bootm_linux, +#endif +#ifdef CONFIG_BOOTM_NETBSD [IH_OS_NETBSD] = do_bootm_netbsd, +#endif #ifdef CONFIG_LYNXKDI [IH_OS_LYNXOS] = do_bootm_lynxkdi, #endif +#ifdef CONFIG_BOOTM_RTEMS [IH_OS_RTEMS] = do_bootm_rtems, +#endif #if defined(CONFIG_CMD_ELF) [IH_OS_VXWORKS] = do_bootm_vxworks, [IH_OS_QNX] = do_bootm_qnxelf, @@ -1161,6 +1177,7 @@ static void fixup_silent_linux () /* OS booting routines */ /*******************************************************************/ +#ifdef CONFIG_BOOTM_NETBSD static int do_bootm_netbsd (int flag, int argc, char *argv[], bootm_headers_t *images) { @@ -1246,6 +1263,7 @@ static int do_bootm_netbsd (int flag, int argc, char *argv[], return 1; } +#endif /* CONFIG_BOOTM_NETBSD*/ #ifdef CONFIG_LYNXKDI static int do_bootm_lynxkdi (int flag, int argc, char *argv[], @@ -1269,6 +1287,7 @@ static int do_bootm_lynxkdi (int flag, int argc, char *argv[], } #endif /* CONFIG_LYNXKDI */ +#ifdef CONFIG_BOOTM_RTEMS static int do_bootm_rtems (int flag, int argc, char *argv[], bootm_headers_t *images) { @@ -1299,6 +1318,7 @@ static int do_bootm_rtems (int flag, int argc, char *argv[], return 1; } +#endif /* CONFIG_BOOTM_RTEMS */ #if defined(CONFIG_CMD_ELF) static int do_bootm_vxworks (int flag, int argc, char *argv[], -- 1.5.5.1

5 28

[U-Boot] non-blocking flash functions - is this possible/acceptable?
by wolfgang＠leila.ping.de 25 Jan '10

25 Jan '10

Hi, we have an update protocol that normally relies on data being received while the previous block is written to flash. We hacked our U-Boot to provide non-blocking variants for flash access for the relevant functions, which are: flash_status_check_nb() flash_full_status_check_nb() flash_erase_nb() (single-sector only) flash_write_cfibuffer_nb() write_buff_nb() Apart from flash_status_check_nb() and flash_erase_nb() (the latter being reduced to handle only one sector at a time), these are mainly the same functions as the originals, but use flash_[full_]status_check_nb() instead, so there is much duplicate code. Is such a use case generally acceptable in U-Boot, and if so, does anybody have an idea how to implement those without all this duplicate code? Of course I can also implement this stuff in our board code, but it seems a bit unlogical to break the flash handling apart and the bloat would remain, just in a different place. [I am bringing this topic up because I am trying to prepare patches for sending to the list, and this one seems to me as a real show-stopper right now.] Regards, Wolfgang

5 15

[U-Boot] [PATCH v5] zlib: updated to v.1.2.3
by Giuseppe CONDORELLI 22 Jan '10

22 Jan '10

This patch updates zlib to the latest stable version. Only relevant zlib parts were ported to u-boot tree, as already did for the current zlib (0.95). New zlib guarantees a faster inflate performances other then others improvements as explained at www.zlib.net. It also includes Alessandro Rubini's patches to allow 0 as destination pointer and to call watchdog reset if required by architecture. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli(a)st.com> Reviewed-by: Angelo Castello <angelo.castello(a)st.com> Reviewed-by: Alessandro Rubini <rubini-list(a)gnudd.com> --- include/u-boot/zlib.h | 718 ++++++--- lib_generic/zlib.c | 3933 +++++++++++++++++++++++++------------------------ 2 files changed, 2466 insertions(+), 2185 deletions(-) diff --git a/include/u-boot/zlib.h b/include/u-boot/zlib.h index e441494..fb27081 100644 --- a/include/u-boot/zlib.h +++ b/include/u-boot/zlib.h @@ -1,21 +1,21 @@ /* - * This file is derived from zlib.h and zconf.h from the zlib-0.95 + * This file is derived from zlib.h and zconf.h from the zlib-1.2.3 * distribution by Jean-loup Gailly and Mark Adler, with some additions * by Paul Mackerras to aid in implementing Deflate compression and * decompression for PPP packets. */ -/* - * ==FILEVERSION 960122== - * - * This marker is used by the Linux installation script to determine - * whether an up-to-date version of this file is already installed. - */ + /* + * ==FILEVERSION 960122== + * + * This marker is used by the Linux installation script to determine + * whether an up-to-date version of this file is already installed. + */ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 0.95, Aug 16th, 1995. + version 1.2.3, July 18th, 2005 - Copyright (C) 1995 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -34,44 +34,151 @@ 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler - gzip(a)prep.ai.mit.edu madler(a)alumni.caltech.edu - */ + jloup(a)gzip.org madler(a)alumni.caltech.edu + -#ifndef _ZLIB_H -#define _ZLIB_H + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#ifdef __cplusplus +extern "C" { +#endif -/* #include "zconf.h" */ /* included directly here */ +#define ZLIB_VERSION "1.2.3" +#define ZLIB_VERNUM 0x1230 +/* #include "zconf.h" */ /* included directly here */ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ - +/* Begin of new zconf.h */ /* - The library does not install any signal handler. It is recommended to - add at least a handler for SIGSEGV when decompressing; the library checks - the consistency of the input data whenever possible but may go nuts - for some forms of corrupted input. + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError + +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif /* * Compile with -DMAXSEG_64K if the alloc function cannot allocate more * than 64k bytes at a time (needed on systems with 16-bit int). - * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints - * at addresses which are not a multiple of their size. - * Under DOS, -DFAR=far or -DFAR=__far may be needed. */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif -#ifndef STDC -# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) +#ifdef __STDC_VERSION__ +# ifndef STDC # define STDC # endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif #endif -#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ -# include <unix.h> +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL #endif /* Maximum value for memLevel in deflateInit2 */ @@ -83,17 +190,17 @@ # endif #endif -#ifndef FAR -# define FAR -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ #ifndef MAX_WBITS # define MAX_WBITS 15 /* 32K LZ77 window */ #endif /* The memory requirements for deflate are (in bytes): - 1 << (windowBits+2) + 1 << (memLevel+9) + (1 << (windowBits+2)) + (1 << (memLevel+9)) that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects. For example, if you want to reduce the default memory requirements from 256K to 128K, compile with @@ -105,7 +212,7 @@ for small objects. */ - /* Type declarations */ + /* Type declarations */ #ifndef OF /* function prototypes */ # ifdef STDC @@ -115,124 +222,268 @@ # endif #endif +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include <windows.h> + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) typedef unsigned char Byte; /* 8 bits */ +#endif typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ -typedef Byte FAR Bytef; -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; typedef uLong FAR uLongf; #ifdef STDC - typedef void FAR *voidpf; - typedef void *voidp; + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; #else - typedef Byte FAR *voidpf; - typedef Byte *voidp; + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; #endif -/* end of original zconf.h */ +# ifdef VMS +# include <unixio.h> /* for off_t */ +# endif +# define z_off_t off_t +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif -#define ZLIB_VERSION "0.95P" +#if defined(__MVS__) +# define NO_vsnprintf +# ifdef FAR +# undef FAR +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(deflateBound,"DEBND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(compressBound,"CMBND") +# pragma map(inflate_table,"INTABL") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_copyright,"INCOPY") +#endif +/* End of new zconf.h */ /* The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This version of the library supports only one compression method - (deflation) but other algorithms may be added later and will have the same + (deflation) but other algorithms will be added later and will have the same stream interface. - For compression the application must provide the output buffer and - may optionally provide the input buffer for optimization. For decompression, - the application must provide the input buffer and may optionally provide - the output buffer for optimization. - Compression can be done in a single step if the buffers are large enough (for example if an input file is mmap'ed), or can be done by repeated calls of the compression function. In the latter case, the application must provide more input and/or consume the output (providing more output space) before each call. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); -typedef void (*cb_func) OF((Bytef *buf, uInt len)); - -struct internal_state; + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ + This library can optionally read and write gzip streams in memory as well. - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidp opaque; /* private data object passed to zalloc and zfree */ + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ - Byte data_type; /* best guess about the data type: ascii or binary */ +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt size)); +typedef void (*cb_func) OF((Bytef *buf, uInt len)); - cb_func outcb; /* called regularly just before blocks of output */ +struct internal_state; +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + int data_type; /* best guess about the data type: + binary or text */ + cb_func outcb; /* called regularly just before blocks of output */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ } z_stream; +typedef z_stream FAR *z_streamp; + /* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. */ - - /* constants */ - +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + + /* constants */ #define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_FULL_FLUSH 2 -#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 #define Z_FINISH 4 -#define Z_PACKET_FLUSH 5 -/* See deflate() below for the usage of these constants */ +#define Z_BLOCK 5 +/* Allowed flush values; see deflate() and inflate() below for details */ #define Z_OK 0 #define Z_STREAM_END 1 +#define Z_NEED_DICT 2 #define Z_ERRNO (-1) #define Z_STREAM_ERROR (-2) #define Z_DATA_ERROR (-3) #define Z_MEM_ERROR (-4) #define Z_BUF_ERROR (-5) -/* error codes for the compression/decompression functions */ +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ +#define Z_NO_COMPRESSION 0 #define Z_BEST_SPEED 1 #define Z_BEST_COMPRESSION 9 #define Z_DEFAULT_COMPRESSION (-1) @@ -240,40 +491,42 @@ typedef struct z_stream_s { #define Z_FILTERED 1 #define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 #define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ #define Z_BINARY 0 -#define Z_ASCII 1 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ #define Z_UNKNOWN 2 -/* Used to set the data_type field */ +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ -extern char *zlib_version; -/* The application can compare zlib_version and ZLIB_VERSION for consistency. + /* basic functions */ + +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. If the first character differs, the library code actually used is not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. */ - /* basic functions */ +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, const char *version, + int stream_size)); -extern int inflateInit OF((z_stream *strm)); +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); /* - Initializes the internal stream state for decompression. The fields - zalloc and zfree must be initialized before by the caller. If zalloc and - zfree are set to Z_NULL, inflateInit updates them to use default allocation - functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory. msg is set to null if there is no error message. - inflateInit does not perform any decompression: this will be done by - inflate(). -*/ - + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. -extern int inflate OF((z_stream *strm, int flush)); -/* - Performs one or both of the following actions: + The detailed semantics are as follows. inflate performs one or both of the + following actions: - Decompress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not @@ -281,24 +534,39 @@ extern int inflate OF((z_stream *strm, int flush)); will resume at this point for the next call of inflate(). - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() always provides as much output as possible - (until there is no more input data or no more space in the output buffer). + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). Before the call of inflate(), the application should ensure that at least one of the actions is possible, by providing more input and/or consuming more output, and updating the next_* and avail_* values accordingly. The application can consume the uncompressed output when it wants, for example when the output buffer is full (avail_out == 0), or after each - call of inflate(). - - If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, - inflate flushes as much output as possible to the output buffer. The - flushing behavior of inflate is not specified for values of the flush - parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the - current implementation actually flushes as much output as possible - anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data - has been consumed, it is expecting to see the length field of a stored - block; if not, it returns Z_DATA_ERROR. + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, + Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() stop + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 + if inflate() is currently decoding the last block in the deflate stream, + plus 128 if inflate() returned immediately after decoding an end-of-block + code or decoding the complete header up to just before the first byte of the + deflate stream. The end-of-block will not be indicated until all of the + uncompressed data from that block has been written to strm->next_out. The + number of unused bits may in general be greater than seven, except when + bit 7 of data_type is set, in which case the number of unused bits will be + less than eight. inflate() should normally be called until it returns Z_STREAM_END or an error. However if all decompression is to be performed in a single step @@ -308,21 +576,47 @@ extern int inflate OF((z_stream *strm, int flush)); uncompressed data. (The size of the uncompressed data may have been saved by the compressor for this purpose.) The next operation on this stream must be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine + is never required, but can be used to inform inflate that a faster approach may be used for the single inflate() call. - inflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if the end of the - compressed data has been reached and all uncompressed output has been - produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if - the stream structure was inconsistent (for example if next_in or next_out - was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no - progress is possible or if there was not enough room in the output buffer - when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then - call inflateSync to look for a good compression block. */ - + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the only effect of the flush parameter in this implementation + is on the return value of inflate(), as noted below, or when it returns early + because Z_BLOCK is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the adler32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() will decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically. Any information + contained in the gzip header is not retained, so applications that need that + information should instead use raw inflate, see inflateInit2() below, or + inflateBack() and perform their own processing of the gzip header and + trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may then + call inflateSync() to look for a good compression block if a partial recovery + of the data is desired. +*/ -extern int inflateEnd OF((z_stream *strm)); +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any @@ -333,85 +627,21 @@ extern int inflateEnd OF((z_stream *strm)); static string (which must not be deallocated). */ - /* advanced functions */ + /* Advanced functions */ -extern int inflateInit2 OF((z_stream *strm, - int windowBits)); -/* - This is another version of inflateInit with more compression options. The - fields next_out, zalloc and zfree must be initialized before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library (the value 16 will be allowed soon). The - default value is 15 if inflateInit is used instead. If a compressed stream - with a larger window size is given as input, inflate() will return with - the error code Z_DATA_ERROR instead of trying to allocate a larger window. - - If next_out is not null, the library will use this buffer for the history - buffer; the buffer must either be large enough to hold the entire output - data, or have at least 1<<windowBits bytes. If next_out is null, the - library will allocate its own buffer (and leave next_out null). next_in - need not be provided here but must be provided by the application for the - next call of inflate(). - - If the history buffer is provided by the application, next_out must - never be changed by the application since the decompressor maintains - history information inside this buffer from call to call; the application - can only reset next_out to the beginning of the history buffer when - avail_out is zero and all output has been consumed. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - windowBits < 8). msg is set to null if there is no error message. - inflateInit2 does not perform any decompression: this will be done by - inflate(). -*/ +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -extern int inflateSync OF((z_stream *strm)); -/* - Skips invalid compressed data until the special marker (see deflate() - above) can be found, or until all available input is skipped. No output - is provided. - - inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no marker has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ + /* utility functions */ -extern int inflateReset OF((z_stream *strm)); /* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. */ -extern int inflateIncomp OF((z_stream *strm)); -/* - This function adds the data at next_in (avail_in bytes) to the output - history without performing any output. There must be no pending output, - and the decompressor must be expecting to see the start of a block. - Calling this function is equivalent to decompressing a stored block - containing the data at next_in (except that the data is not output). -*/ - - /* checksum functions */ - -/* - This function is not related to compression but is exported - anyway because it might be useful in applications using the - compression library. -*/ - -extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); - +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); /* Update a running Adler-32 checksum with the bytes buf[0..len-1] and return the updated checksum. If buf is NULL, this function returns @@ -427,8 +657,42 @@ extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); if (adler != original_adler) error(); */ -#ifndef _Z_UTIL_H - struct internal_state {int dummy;}; /* hack for buggy compilers */ +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + +ZEXTERN uInt ZEXPORT crc32 OF((uInt crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +#ifdef __cplusplus +} #endif -#endif /* _ZLIB_H */ +#endif /* ZLIB_H */ diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c index d1cd44c..3d5b5c0 100644 --- a/lib_generic/zlib.c +++ b/lib_generic/zlib.c @@ -1,5 +1,5 @@ /* - * This file is derived from various .h and .c files from the zlib-0.95 + * This file is derived from various .h and .c files from the zlib-1.2.3 * distribution by Jean-loup Gailly and Mark Adler, with some additions * by Paul Mackerras to aid in implementing Deflate compression and * decompression for PPP packets. See zlib.h for conditions of @@ -14,7 +14,7 @@ /*+++++*/ /* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -23,28 +23,28 @@ subject to change. Applications should only use zlib.h. */ -/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */ - -#define _Z_UTIL_H +#define ZUTIL_H +#define ZLIB_INTERNAL #include "u-boot/zlib.h" +/* To avoid a build time warning */ +#ifdef STDC +#include <malloc.h> +#endif #ifndef local -# define local static +#define local static #endif /* compile with -Dlocal if your debugger can't find static symbols */ -#define FAR - -typedef unsigned char uch; +typedef unsigned char uch; typedef uch FAR uchf; typedef unsigned short ush; typedef ush FAR ushf; -typedef unsigned long ulg; - -extern char *z_errmsg[]; /* indexed by 1-zlib_error */ +typedef unsigned long ulg; -#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err) +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] +#define ERR_RETURN(strm,err) return (strm->msg = (char*)ERR_MSG(err), (err)) /* To be used only when the state is known to be valid */ #ifndef NULL @@ -53,17 +53,15 @@ extern char *z_errmsg[]; /* indexed by 1-zlib_error */ /* common constants */ -#define DEFLATED 8 - #ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS +#define DEF_WBITS MAX_WBITS #endif /* default windowBits for decompression. MAX_WBITS is for compression only */ #if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 +#define DEF_MEM_LEVEL 8 #else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#define DEF_MEM_LEVEL MAX_MEM_LEVEL #endif /* default memLevel */ @@ -72,51 +70,47 @@ extern char *z_errmsg[]; /* indexed by 1-zlib_error */ #define DYN_TREES 2 /* The three kinds of block type */ -#define MIN_MATCH 3 -#define MAX_MATCH 258 +#define MIN_MATCH 3 +#define MAX_MATCH 258 /* The minimum and maximum match lengths */ /* functions */ #include <linux/string.h> #define zmemcpy memcpy -#define zmemzero(dest, len) memset(dest, 0, len) +#define zmemcmp memcmp +#define zmemzero(dest, len) memset(dest, 0, len) /* Diagnostic functions */ -#ifdef DEBUG_ZLIB -# include <stdio.h> -# ifndef verbose -# define verbose 0 -# endif -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#ifdef DEBUG +#include <stdio.h> + extern int z_verbose; + extern void z_error OF((char *m)); +#define Assert(cond,msg) {if(!(cond)) z_error(msg);} +#define Trace(x) {if (z_verbose>=0) fprintf x ;} +#define Tracev(x) {if (z_verbose>0) fprintf x ;} +#define Tracevv(x) {if (z_verbose>1) fprintf x ;} +#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} #else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) +#define Assert(cond,msg) +#define Trace(x) +#define Tracev(x) +#define Tracevv(x) +#define Tracec(c,x) +#define Tracecv(c,x) #endif - -typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); - -/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */ -/* void zcfree OF((voidpf opaque, voidpf ptr)); */ +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr, unsigned size)); #define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr, size) \ - (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size)) -#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);} + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0) -/* deflate.h -- internal compression state - * Copyright (C) 1995 Jean-loup Gailly +/*+++++*/ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -125,9 +119,47 @@ typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); subject to change. Applications should only use zlib.h. */ +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ + +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an + exhaustive search). The true maximum is not known, but the value + below is more than safe. */ +#define ENOUGH 2048 +#define MAXD 592 + +/* Type of code to build for inftable() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); /*+++++*/ -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995 Mark Adler +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -136,101 +168,113 @@ typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); subject to change. Applications should only use zlib.h. */ -struct inflate_blocks_state; -typedef struct inflate_blocks_state FAR inflate_blocks_statef; - -local inflate_blocks_statef * inflate_blocks_new OF(( - z_stream *z, - check_func c, /* check function */ - uInt w)); /* window size */ - -local int inflate_blocks OF(( - inflate_blocks_statef *, - z_stream *, - int)); /* initial return code */ - -local void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_stream *, - uLongf *)); /* check value on output */ - -local int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_stream *, - uLongf *)); /* check value on output */ - -local int inflate_addhistory OF(( - inflate_blocks_statef *, - z_stream *)); - -local int inflate_packet_flush OF(( - inflate_blocks_statef *)); +#define GUNZIP + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN, /* i: waiting for length/lit code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC, /* looking for synchronization bytes to restart inflate() */ + START, + WASH, + END, + BADCODE +} inflate_mode; -/*+++++*/ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. +/* + State transitions between above modes - + + (most modes can go to the BAD or MEM mode -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME + NAME -> COMMENT -> HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or CHECK + STORED -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE */ -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). */ - -typedef struct inflate_huft_s FAR inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; /* number of extra bits or operation */ - Byte Bits; /* number of bits in this code or subcode */ - } what; - uInt Nalloc; /* number of these allocated here */ - Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit machines) */ - union { - uInt Base; /* literal, length base, or distance base */ - inflate_huft *Next; /* pointer to next level of table */ - } more; +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ }; -#ifdef DEBUG_ZLIB - local uInt inflate_hufts; -#endif - -local int inflate_trees_bits OF(( - uIntf *, /* 19 code lengths */ - uIntf *, /* bits tree desired/actual depth */ - inflate_huft * FAR *, /* bits tree result */ - z_stream *)); /* for zalloc, zfree functions */ - -local int inflate_trees_dynamic OF(( - uInt, /* number of literal/length codes */ - uInt, /* number of distance codes */ - uIntf *, /* that many (total) code lengths */ - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *, /* distance tree result */ - z_stream *)); /* for zalloc, zfree functions */ - -local int inflate_trees_fixed OF(( - uIntf *, /* literal desired/actual bit depth */ - uIntf *, /* distance desired/actual bit depth */ - inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *)); /* distance tree result */ - -local int inflate_trees_free OF(( - inflate_huft *, /* tables to free */ - z_stream *)); /* for zfree function */ - - /*+++++*/ -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995 Mark Adler +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -239,1923 +283,1896 @@ local int inflate_trees_free OF(( subject to change. Applications should only use zlib.h. */ -struct inflate_codes_state; -typedef struct inflate_codes_state FAR inflate_codes_statef; - -local inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_stream *)); - -local int inflate_codes OF(( - inflate_blocks_statef *, - z_stream *, - int)); +void inflate_fast OF((z_streamp strm, unsigned start)); +/*+++++*/ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ -local void inflate_codes_free OF(( - inflate_codes_statef *, - z_stream *)); + /* WARNING: this file should *not* be used by applications. It + is part of the implementation of the compression library and + is subject to change. Applications should only use zlib.h. + */ + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; /*+++++*/ -/* inflate.c -- zlib interface to inflate modules - * Copyright (C) 1995 Mark Adler +/* inffast.c -- fast decoding + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ -/* inflate private state */ -struct internal_state { - - /* mode */ - enum { - METHOD, /* waiting for method byte */ - FLAG, /* waiting for flag byte */ - BLOCKS, /* decompressing blocks */ - CHECK4, /* four check bytes to go */ - CHECK3, /* three check bytes to go */ - CHECK2, /* two check bytes to go */ - CHECK1, /* one check byte to go */ - DONE, /* finished check, done */ - BAD} /* got an error--stay here */ - mode; /* current inflate mode */ - - /* mode dependent information */ - union { - uInt method; /* if FLAGS, method byte */ - struct { - uLong was; /* computed check value */ - uLong need; /* stream check value */ - } check; /* if CHECK, check values to compare */ - uInt marker; /* if BAD, inflateSync's marker bytes count */ - } sub; /* submode */ - - /* mode independent information */ - int nowrap; /* flag for no wrapper */ - uInt wbits; /* log2(window size) (8..15, defaults to 15) */ - inflate_blocks_statef - *blocks; /* current inflate_blocks state */ - -}; - - -int inflateReset(z) -z_stream *z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? BLOCKS : METHOD; - inflate_blocks_reset(z->state->blocks, z, &c); - Trace((stderr, "inflate: reset\n")); - return Z_OK; -} - - -int inflateEnd(z) -z_stream *z; -{ - uLong c; - - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z, &c); - ZFREE(z, z->state, sizeof(struct internal_state)); - z->state = Z_NULL; - Trace((stderr, "inflate: end\n")); - return Z_OK; -} - - -int inflateInit2(z, w) -z_stream *z; -int w; -{ - /* initialize state */ - if (z == Z_NULL) - return Z_STREAM_ERROR; -/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */ -/* if (z->zfree == Z_NULL) z->zfree = zcfree; */ - if ((z->state = (struct internal_state FAR *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - /* handle undocumented nowrap option (no zlib header or check) */ - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - /* set window size */ - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - /* create inflate_blocks state */ - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Trace((stderr, "inflate: allocated\n")); - - /* reset state */ - inflateReset(z); - return Z_OK; -} - - -int inflateInit(z) -z_stream *z; -{ - return inflateInit2(z, DEF_WBITS); -} - - -#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} -#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) - -int inflate(z, f) -z_stream *z; -int f; -{ - int r; - uInt b; - - if (z == Z_NULL || z->next_in == Z_NULL) - return Z_STREAM_ERROR; - r = Z_BUF_ERROR; - while (1) switch (z->state->mode) - { - case METHOD: - NEEDBYTE - if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED) - { - z->state->mode = BAD; - z->msg = "unknown compression method"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = BAD; - z->msg = "invalid window size"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - z->state->mode = FLAG; - case FLAG: - NEEDBYTE - if ((b = NEXTBYTE) & 0x20) - { - z->state->mode = BAD; - z->msg = "invalid reserved bit"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = BAD; - z->msg = "incorrect header check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib header ok\n")); - z->state->mode = BLOCKS; - case BLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) - r = inflate_packet_flush(z->state->blocks); - if (r == Z_DATA_ERROR) - { - z->state->mode = BAD; - z->state->sub.marker = 0; /* can try inflateSync */ - break; - } - if (r != Z_STREAM_END) - return r; - r = Z_OK; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = DONE; - break; - } - z->state->mode = CHECK4; - case CHECK4: - NEEDBYTE - z->state->sub.check.need = (uLong)NEXTBYTE << 24; - z->state->mode = CHECK3; - case CHECK3: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 16; - z->state->mode = CHECK2; - case CHECK2: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE << 8; - z->state->mode = CHECK1; - case CHECK1: - NEEDBYTE - z->state->sub.check.need += (uLong)NEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = BAD; - z->msg = "incorrect data check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Trace((stderr, "inflate: zlib check ok\n")); - z->state->mode = DONE; - case DONE: - return Z_STREAM_END; - case BAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } - - empty: - if (f != Z_PACKET_FLUSH) - return r; - z->state->mode = BAD; - z->state->sub.marker = 0; /* can try inflateSync */ - return Z_DATA_ERROR; -} +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#define OFF 1 +#define PUP(a) *++(a) /* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. */ - -int inflateIncomp(z) -z_stream *z; +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ { - if (z->state->mode != BLOCKS) - return Z_DATA_ERROR; - return inflate_addhistory(z->state->blocks, z); -} - - -int inflateSync(z) -z_stream *z; -{ - uInt n; /* number of bytes to look at */ - Bytef *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->mode != BAD) - { - z->state->mode = BAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - if (*p == (Byte)(m < 2 ? 0 : 0xff)) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = BLOCKS; - return Z_OK; + struct inflate_state FAR *state; + unsigned char FAR *in; /* local strm->next_in */ + unsigned char FAR *last; /* while in < last, enough input available */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code this; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + write = state->write; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = lcode[hold & lmask]; + dolen: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op == 0) { /* literal */ + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + PUP(out) = (unsigned char)(this.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = dcode[hold & dmask]; + dodist: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + from = window - OFF; + if (write == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (write < op) { /* wrap around window */ + from += wsize + write - op; + op -= write; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (write < len) { /* some from start of window */ + op = write; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += write - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } while (len > 2); + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + this = dcode[this.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + this = lcode[this.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; } -#undef NEEDBYTE -#undef NEXTBYTE - -/*+++++*/ -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONEB, /* finished last block, done */ - BADB} /* got a data error--stuck here */ - mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uIntf *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - int nblens; /* # elements allocated at blens */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_huft *tl, *td; /* trees to free */ - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - Bytef *window; /* sliding window */ - Bytef *end; /* one byte after sliding window */ - Bytef *read; /* window read pointer */ - Bytef *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define DUMPBITS(j) {b>>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (q<s->read?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load local pointers */ -#define LOAD {LOADIN LOADOUT} - /* - * The IBM 150 firmware munges the data right after _etext[]. This - * protects it. -- Cort + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and write == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop */ -#if 0 -local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0}; -#endif -/* And'ing with mask[n] masks the lower n bits */ -local uInt inflate_mask[] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - -/* copy as much as possible from the sliding window to the output area */ -local int inflate_flush OF(( - inflate_blocks_statef *, - z_stream *, - int)); /*+++++*/ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995 Mark Adler +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -local int inflate_fast OF(( - uInt, - uInt, - inflate_huft *, - inflate_huft *, - inflate_blocks_statef *, - z_stream *)); - - -/*+++++*/ -/* infblock.c -- interpret and process block types to last block - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h +#define MAXBITS 15 +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. */ -/* Table for deflate from PKZIP's appnote.txt. */ -local uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - /* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. */ - - -local void inflate_blocks_reset(s, z, c) -inflate_blocks_statef *s; -z_stream *z; -uLongf *c; +int inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; { - if (s->checkfn != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); - if (s->mode == CODES) - { - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - } - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(0L, Z_NULL, 0); - if (z->outcb != Z_NULL) - (*z->outcb)(Z_NULL, 0); - Trace((stderr, "inflate: blocks reset\n")); -} - - -local inflate_blocks_statef *inflate_blocks_new(z, c, w) -z_stream *z; -check_func c; -uInt w; -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s, sizeof(struct inflate_blocks_state)); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Trace((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, &s->check); - return s; -} + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) { /* no symbols to code at all */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)1; + this.val = (unsigned short)0; + *(*table)++ = this; /* make a table to force an error */ + *(*table)++ = this; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked when a LENS table is being made + against the space in *table, ENOUGH, minus the maximum space needed by + the worst case distance code, MAXD. This should never happen, but the + sufficiency of ENOUGH has not been proven exhaustively, hence the check. + This assumes that when type == LENS, bits == 9. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ -local int inflate_blocks(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; -{ - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Trace((stderr, "inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Trace((stderr, "inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.tl = Z_NULL; /* don't try to free these */ - s->sub.decode.td = Z_NULL; - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Trace((stderr, "inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BADB; - z->msg = "invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if (((~b) >> 16) != (b & 0xffff)) - { - s->mode = BADB; - z->msg = "invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : TYPE; - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev((stderr, "inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BADB; - z->msg = "too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if (t < 19) - t = 19; - if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.trees.nblens = t; - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev((stderr, "inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, z); - if (t != Z_OK) - { - r = t; - if (r == Z_DATA_ERROR) - s->mode = BADB; - LEAVE - } - s->sub.trees.index = 0; - Tracev((stderr, "inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->word.what.Bits; - c = h->more.Base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - s->mode = BADB; - z->msg = "invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - inflate_trees_free(s->sub.trees.tb, z); - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, z); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = BADB; - r = t; - LEAVE - } - Tracev((stderr, "inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - inflate_trees_free(td, z); - inflate_trees_free(tl, z); - r = Z_MEM_ERROR; - LEAVE - } - ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); - s->sub.decode.codes = c; - s->sub.decode.tl = tl; - s->sub.decode.td = td; - } - s->mode = CODES; + /* set up for code type */ + switch (type) { case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - LOAD - Tracev((stderr, "inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONEB; - case DONEB: - r = Z_STREAM_END; - LEAVE - case BADB: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } -local int inflate_blocks_free(s, z, c) -inflate_blocks_statef *s; -z_stream *z; -uLongf *c; -{ - inflate_blocks_reset(s, z, c); - ZFREE(z, s->window, s->end - s->window); - ZFREE(z, s, sizeof(struct inflate_blocks_state)); - Trace((stderr, "inflate: blocks freed\n")); - return Z_OK; -} + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + min = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += min; /* here min is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } -/* - * This subroutine adds the data at next_in/avail_in to the output history - * without performing any output. The output buffer must be "caught up"; - * i.e. no pending output (hence s->read equals s->write), and the state must - * be BLOCKS (i.e. we should be willing to see the start of a series of - * BLOCKS). On exit, the output will also be caught up, and the checksum - * will have been updated if need be. - */ -local int inflate_addhistory(s, z) -inflate_blocks_statef *s; -z_stream *z; -{ - uLong b; /* bit buffer */ /* NOT USED HERE */ - uInt k; /* bits in bit buffer */ /* NOT USED HERE */ - uInt t; /* temporary storage */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - if (s->read != s->write) - return Z_STREAM_ERROR; - if (s->mode != TYPE) - return Z_DATA_ERROR; - - /* we're ready to rock */ - LOAD - /* while there is input ready, copy to output buffer, moving - * pointers as needed. + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. */ - while (n) { - t = n; /* how many to do */ - /* is there room until end of buffer? */ - if (t > m) t = m; - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, t); - /* output callback */ - if (z->outcb != Z_NULL) - (*z->outcb)(q, t); - zmemcpy(q, p, t); - q += t; - p += t; - n -= t; - z->total_out += t; - s->read = q; /* drag read pointer forward */ -/* WRAP */ /* expand WRAP macro by hand to handle s->read */ - if (q == s->end) { - s->read = q = s->window; - m = WAVAIL; - } + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; } - UPDATE - return Z_OK; -} - -/* - * At the end of a Deflate-compressed PPP packet, we expect to have seen - * a `stored' block type value but not the (zero) length bytes. - */ -local int inflate_packet_flush(s) - inflate_blocks_statef *s; -{ - if (s->mode != LENS) - return Z_DATA_ERROR; - s->mode = TYPE; - return Z_OK; + /* set return parameters */ + *table += used; + *bits = root; + return 0; } - /*+++++*/ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995 Mark Adler +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, unsigned out)); -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - - -local int huft_build OF(( - uIntf *, /* code lengths in bits */ - uInt, /* number of codes */ - uInt, /* number of "simple" codes */ - uIntf *, /* list of base values for non-simple codes */ - uIntf *, /* list of extra bits for non-simple codes */ - inflate_huft * FAR*,/* result: starting table */ - uIntf *, /* maximum lookup bits (returns actual) */ - z_stream *)); /* for zalloc function */ - -local voidpf falloc OF(( - voidpf, /* opaque pointer (not used) */ - uInt, /* number of items */ - uInt)); /* size of item */ - -local void ffree OF(( - voidpf q, /* opaque pointer (not used) */ - voidpf p, /* what to free (not used) */ - uInt n)); /* number of bytes (not used) */ - -/* Tables for deflate from PKZIP's appnote.txt. */ -local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* actually lengths - 2; also see note #13 above about 258 */ -local uInt cplext[] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ -local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -local uInt cpdext[] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ -#define BMAX 15 /* maximum bit length of any code */ -#define N_MAX 288 /* maximum number of codes in any set */ - -#ifdef DEBUG_ZLIB - uInt inflate_hufts; -#endif - -local int huft_build(b, n, s, d, e, t, m, zs) -uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ -uInt n; /* number of codes (assumed <= N_MAX) */ -uInt s; /* number of simple-valued codes (0..s-1) */ -uIntf *d; /* list of base values for non-simple codes */ -uIntf *e; /* list of extra bits for non-simple codes */ -inflate_huft * FAR *t; /* result: starting table */ -uIntf *m; /* maximum lookup bits, returns actual */ -z_stream *zs; /* for zalloc function */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR - if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (all zero length codes or an - over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ +int ZEXPORT inflateReset(strm) +z_streamp strm; { - - uInt a; /* counter for codes of length k */ - uInt c[BMAX+1]; /* bit length count table */ - uInt f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register uInt i; /* counter, current code */ - register uInt j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - register uIntf *p; /* pointer into c[], b[], or v[] */ - inflate_huft *q; /* points to current table */ - struct inflate_huft_s r; /* table entry for structure assignment */ - inflate_huft *u[BMAX]; /* table stack */ - uInt v[N_MAX]; /* values in order of bit length */ - register int w; /* bits before this table == (l * h) */ - uInt x[BMAX+1]; /* bit offsets, then code stack */ - uIntf *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - uInt z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4 /* clear c[]--assume BMAX+1 is 16 */ - p = b; i = n; - do { - c[*p++]++; /* assume all entries <= BMAX */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (inflate_huft *)Z_NULL; - *m = 0; + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + strm->adler = 1; /* to support ill-conceived Java test suite */ + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->wsize = 0; + state->whave = 0; + state->write = 0; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + Tracev((stderr, "inflate: reset\n")); return Z_OK; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((uInt)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ - q = (inflate_huft *)Z_NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - if (j < z) - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } - z = 1 << j; /* table entries for j-bit table */ - - /* allocate and link in new table */ - if ((q = (inflate_huft *)ZALLOC - (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) - { - if (h) - inflate_trees_free(u[0], zs); - return Z_MEM_ERROR; /* not enough memory */ - } - q->word.Nalloc = z + 1; -#ifdef DEBUG_ZLIB - inflate_hufts += z + 1; -#endif - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->next)) = Z_NULL; - u[h] = ++q; /* table starts after link */ - - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.bits = (Byte)l; /* bits to dump before this table */ - r.exop = (Byte)j; /* bits in this table */ - r.next = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ - u[h-1][j] = r; /* connect to last table */ - } - } - - /* set up table entry in r */ - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; /* out of values--invalid code */ - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ - r.base = *p++; /* simple code is just the value */ - } - else - { - r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */ - r.base = d[*p++ - s]; - } - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - } - } - } - - - /* Return Z_BUF_ERROR if we were given an incomplete table */ - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} - - -local int inflate_trees_bits(c, bb, tb, z) -uIntf *c; /* 19 code lengths */ -uIntf *bb; /* bits tree desired/actual depth */ -inflate_huft * FAR *tb; /* bits tree result */ -z_stream *z; /* for zfree function */ -{ - int r; - - r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR) - { - inflate_trees_free(*tb, z); - z->msg = "incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - return r; } - -local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) -uInt nl; /* number of literal/length codes */ -uInt nd; /* number of distance codes */ -uIntf *c; /* that many (total) code lengths */ -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ -z_stream *z; /* for zfree function */ +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; { - int r; - - /* build literal/length tree */ - if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) - { - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) - { - inflate_trees_free(*tl, z); - z->msg = "incomplete literal/length tree"; - r = Z_DATA_ERROR; + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; } - return r; - } - - /* build distance tree */ - if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) - { - if (r == Z_DATA_ERROR) - z->msg = "oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) { -#ifdef PKZIP_BUG_WORKAROUND - r = Z_OK; - } -#else - inflate_trees_free(*td, z); - z->msg = "incomplete literal/length tree"; - r = Z_DATA_ERROR; + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + if (windowBits < 0) { + state->wrap = 0; + windowBits = -windowBits; } - inflate_trees_free(*tl, z); - return r; + else { + state->wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) windowBits &= 15; #endif - } - - /* done */ - return Z_OK; -} - - -/* build fixed tables only once--keep them here */ -local int fixed_lock = 0; -local int fixed_built = 0; -#define FIXEDH 530 /* number of hufts used by fixed tables */ -local uInt fixed_left = FIXEDH; -local inflate_huft fixed_mem[FIXEDH]; -local uInt fixed_bl; -local uInt fixed_bd; -local inflate_huft *fixed_tl; -local inflate_huft *fixed_td; - - -local voidpf falloc(q, n, s) -voidpf q; /* opaque pointer (not used) */ -uInt n; /* number of items */ -uInt s; /* size of item */ -{ - Assert(s == sizeof(inflate_huft) && n <= fixed_left, - "inflate_trees falloc overflow"); - if (q) s++; /* to make some compilers happy */ - fixed_left -= n; - return (voidpf)(fixed_mem + fixed_left); -} - - -local void ffree(q, p, n) -voidpf q; -voidpf p; -uInt n; -{ - Assert(0, "inflate_trees ffree called!"); - if (q) q = p; /* to make some compilers happy */ + } + if (windowBits < 8 || windowBits > 15) { + ZFREE(strm, state); + strm->state = Z_NULL; + return Z_STREAM_ERROR; + } + state->wbits = (unsigned)windowBits; + state->window = Z_NULL; + return inflateReset(strm); } - -local int inflate_trees_fixed(bl, bd, tl, td) -uIntf *bl; /* literal desired/actual bit depth */ -uIntf *bd; /* distance desired/actual bit depth */ -inflate_huft * FAR *tl; /* literal/length tree result */ -inflate_huft * FAR *td; /* distance tree result */ +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; { - /* build fixed tables if not built already--lock out other instances */ - while (++fixed_lock > 1) - fixed_lock--; - if (!fixed_built) - { - int k; /* temporary variable */ - unsigned c[288]; /* length list for huft_build */ - z_stream z; /* for falloc function */ - - /* set up fake z_stream for memory routines */ - z.zalloc = falloc; - z.zfree = ffree; - z.opaque = Z_NULL; - - /* literal table */ - for (k = 0; k < 144; k++) - c[k] = 8; - for (; k < 256; k++) - c[k] = 9; - for (; k < 280; k++) - c[k] = 7; - for (; k < 288; k++) - c[k] = 8; - fixed_bl = 7; - huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); - - /* distance table */ - for (k = 0; k < 30; k++) - c[k] = 5; - fixed_bd = 5; - huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); - - /* done */ - fixed_built = 1; - } - fixed_lock--; - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; + return inflateInit2_(strm, DEF_WBITS, version, stream_size); } - -local int inflate_trees_free(t, z) -inflate_huft *t; /* table to free */ -z_stream *z; /* for zfree function */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ +local void fixedtables(state) +struct inflate_state FAR *state; { - register inflate_huft *p, *q; - - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - p = t; - while (p != Z_NULL) - { - q = (--p)->next; - ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft)); - p = q; - } - return Z_OK; + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; } -/*+++++*/ -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. */ +local int updatewindow(strm, out) +z_streamp strm; +unsigned out; +{ + struct inflate_state FAR *state; + unsigned copy, dist; -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ - mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ + state = (struct inflate_state FAR *)strm->state; -}; + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->write = 0; + state->whave = 0; + } -local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) -uInt bl, bd; -inflate_huft *tl, *td; -z_stream *z; -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev((stderr, "inflate: codes new\n")); - } - return c; + /* copy state->wsize or less output bytes into the circular window */ + copy = out - strm->avail_out; + if (copy >= state->wsize) { + zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); + state->write = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->write; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->write, strm->next_out - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, strm->next_out - copy, copy); + state->write = copy; + state->whave = state->wsize; + } + else { + state->write += dist; + if (state->write == state->wsize) state->write = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; } +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) + +/* check macros for header crc */ +#define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +#define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Reverse the bytes in a 32-bit value */ +#define REVERSE(q) \ + ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } -local int inflate_codes(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; { - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Bytef *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - if (e & 32) /* end of block */ - { - Tracevv((stderr, "inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = "invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv((stderr, "inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t->next; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = "invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ -#ifndef __TURBOC__ /* Turbo C bug for following expression */ - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + if (strm == Z_NULL || strm->state == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ #else - f = q - c->sub.copy.dist; - if ((uInt)(q - s->window) < c->sub.copy.dist) - f = s->end - (c->sub.copy.dist - (q - s->window)); + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = (char *)"incorrect header check"; + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (len > state->wbits) { + strm->msg = (char *)"invalid window size"; + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = (char *)"unknown header flags set"; + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = (char *)"header crc mismatch"; + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; #endif - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } + case DICTID: + NEEDBITS(32); + strm->adler = state->check = REVERSE(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + if (flush == Z_BLOCK) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + case LEN: + if (strm->outcb != Z_NULL) /* for watchdog (U-Boot) */ + (*strm->outcb)(Z_NULL, 0); + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + break; + } + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + state->length = (unsigned)this.val; + if ((int)(this.op) == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + state->mode = LIT; + break; + } + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + if (this.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + state->extra = (unsigned)(this.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->mode = DIST; + case DIST: + for (;;) { + this = state->distcode[BITS(state->distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)this.val; + state->extra = (unsigned)(this.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + if (state->offset > state->whave + out - left) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->write) { + copy -= state->write; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->write - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + REVERSE(hold)) != state->check) { + strm->msg = (char *)"incorrect data check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = (char *)"incorrect length check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) + if (updatewindow(strm, out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; } - -local void inflate_codes_free(c, z) -inflate_codes_statef *c; -z_stream *z; +int ZEXPORT inflateEnd(strm) +z_streamp strm; { - ZFREE(z, c, sizeof(struct inflate_codes_state)); - Tracev((stderr, "inflate: codes free\n")); + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) ZFREE(strm, state->window); + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; } /*+++++*/ -/* inflate_util.c -- data and routines common to blocks and codes - * Copyright (C) 1995 Mark Adler +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* copy as much as possible from the sliding window to the output area */ -local int inflate_flush(s, z, r) -inflate_blocks_statef *s; -z_stream *z; -int r; -{ - uInt n; - Bytef *p, *q; - - /* local copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as far as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, n); - - /* output callback */ - if (z->outcb != Z_NULL) - (*z->outcb)(q, n); - - /* copy as far as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - s->check = (*s->checkfn)(s->check, q, n); - - /* output callback */ - if (z->outcb != Z_NULL) - (*z->outcb)(q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} +/* @(#) $Id$ */ +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif -/*+++++*/ -/* inffast.c -- process literals and length/distance pairs fast - * Copyright (C) 1995 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ +const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; -/* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next -#define exop word.what.Exop -#define bits word.what.Bits - -/* macros for bit input with no checking and for returning unused bytes */ -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;} - -/* Called with number of bytes left to write in window at least 258 - (the maximum string length) and number of input bytes available - at least ten. The ten bytes are six bytes for the longest length/ - distance pair plus four bytes for overloading the bit buffer. */ - -local int inflate_fast(bl, bd, tl, td, s, z) -uInt bl, bd; -inflate_huft *tl, *td; -inflate_blocks_statef *s; -z_stream *z; +#ifdef DEBUG + +#ifndef verbose +#define verbose 0 +#endif +int z_verbose = verbose; + +void z_error (m) + char *m; { - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - uInt ml; /* mask for literal/length tree */ - uInt md; /* mask for distance tree */ - uInt c; /* bytes to copy */ - uInt d; /* distance back to copy from */ - Bytef *r; /* copy source pointer */ - - /* load input, output, bit values */ - LOAD - - /* initialize masks */ - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - /* do until not enough input or output space for fast loop */ - do { /* assume called with m >= 258 && n >= 10 */ - /* get literal/length code */ - GRABBITS(20) /* max bits for literal/length code */ - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits for length */ - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * length %u\n", c)); - - /* decode distance base of block to copy */ - GRABBITS(15); /* max bits for distance code */ - e = (t = td + ((uInt)b & md))->exop; - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits to add to distance base */ - e &= 15; - GRABBITS(e) /* get extra bits (up to 13) */ - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * distance %u\n", d)); - - /* do the copy */ - m -= c; - if ((uInt)(q - s->window) >= d) /* offset before dest */ - { /* just copy */ - r = q - d; - *q++ = *r++; c--; /* minimum count is three, */ - *q++ = *r++; c--; /* so unroll loop a little */ - } - else /* else offset after destination */ - { - e = d - (q - s->window); /* bytes from offset to end */ - r = s->end - e; /* pointer to offset */ - if (c > e) /* if source crosses, */ - { - c -= e; /* copy to end of window */ - do { - *q++ = *r++; - } while (--e); - r = s->window; /* copy rest from start of window */ - } - } - do { /* copy all or what's left */ - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; - else - { - z->msg = "invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - break; - } - if ((e & 64) == 0) - { - if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv((stderr, "inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = "invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - } while (m >= 258 && n >= 10); - - /* not enough input or output--restore pointers and return */ - UNGRAB - UPDATE - return Z_OK; + fprintf(stderr, "%s\n", m); + exit(1); } +#endif - -/*+++++*/ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h +/* exported to allow conversion of error code to string for compress() and + * uncompress() */ +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ -/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */ - -char *zlib_version = ZLIB_VERSION; +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif -char *z_errmsg[] = { -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -""}; +voidpf zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) + items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} +void zcfree (opaque, ptr, nb) + voidpf opaque; + voidpf ptr; + unsigned nb; +{ + free(ptr); + if (opaque) + return; /* make compiler happy */ +} +#endif /* MY_ZCALLOC */ /*+++++*/ /* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995 Mark Adler + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ -/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */ +/* @(#) $Id$ */ -#define BASE 65521L /* largest prime smaller than 65536 */ +#define BASE 65521UL /* largest prime smaller than 65536 */ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ -#define DO1(buf) {s1 += *buf++; s2 += s1;} -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); -#define DO16(buf) DO8(buf); DO8(buf); +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware */ +#ifdef NO_DIVIDE +#define MOD(a) \ + do { \ + if (a >= (BASE << 16)) \ + a -= (BASE << 16); \ + if (a >= (BASE << 15)) \ + a -= (BASE << 15); \ + if (a >= (BASE << 14)) \ + a -= (BASE << 14); \ + if (a >= (BASE << 13)) \ + a -= (BASE << 13); \ + if (a >= (BASE << 12)) \ + a -= (BASE << 12); \ + if (a >= (BASE << 11)) \ + a -= (BASE << 11); \ + if (a >= (BASE << 10)) \ + a -= (BASE << 10); \ + if (a >= (BASE << 9)) \ + a -= (BASE << 9); \ + if (a >= (BASE << 8)) \ + a -= (BASE << 8); \ + if (a >= (BASE << 7)) \ + a -= (BASE << 7); \ + if (a >= (BASE << 6)) \ + a -= (BASE << 6); \ + if (a >= (BASE << 5)) \ + a -= (BASE << 5); \ + if (a >= (BASE << 4)) \ + a -= (BASE << 4); \ + if (a >= (BASE << 3)) \ + a -= (BASE << 3); \ + if (a >= (BASE << 2)) \ + a -= (BASE << 2); \ + if (a >= (BASE << 1)) \ + a -= (BASE << 1); \ + if (a >= BASE) \ + a -= BASE; \ + } while (0) +#define MOD4(a) \ + do { \ + if (a >= (BASE << 4)) \ + a -= (BASE << 4); \ + if (a >= (BASE << 3)) \ + a -= (BASE << 3); \ + if (a >= (BASE << 2)) \ + a -= (BASE << 2); \ + if (a >= (BASE << 1)) \ + a -= (BASE << 1); \ + if (a >= BASE) \ + a -= BASE; \ + } while (0) +#else +#define MOD(a) a %= BASE +#define MOD4(a) a %= BASE +#endif /* ========================================================================= */ -uLong adler32(adler, buf, len) +uLong ZEXPORT adler32(adler, buf, len) uLong adler; - Bytef *buf; + const Bytef *buf; uInt len; { - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - DO16(buf); - k -= 16; - } - if (k != 0) do { - DO1(buf); - } while (--k); - s1 %= BASE; - s2 %= BASE; + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); } - return (s2 << 16) | s1; + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD4(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); } -- 1.6.0.6

4 8

[U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code
by Kumar Gala 22 Jan '10

22 Jan '10

Its possible that we try and copy the boot page code out of flash into a DDR location that doesn't have a TLB cover it. For example, if we have 3G of DDR we typically only map the first 2G. In the cases of 4G+ this wasn't an issue since the reset page TLB mapping covered the last page of memory which we wanted to copy to. We now change the physical address of the reset page TLB to map to the true physical location of the boot page code, copy and than set the TLB back to its 1:1 mapping of the reset page. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- cpu/mpc85xx/mp.c | 32 +++++++++++++++++++++++++++++--- 1 files changed, 29 insertions(+), 3 deletions(-) diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index 2df55c7..fa65bed 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -25,6 +25,7 @@ #include <ioports.h> #include <lmb.h> #include <asm/io.h> +#include <asm/mmu.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; @@ -209,8 +210,33 @@ void setup_mp(void) ulong fixup = (ulong)&__secondary_start_page; u32 bootpg = determine_mp_bootpg(); - memcpy((void *)bootpg, (void *)fixup, 4096); - flush_cache(bootpg, 4096); + /* look for the tlb covering the reset page, there better be one */ + int i = find_tlb_idx((void *)0xfffff000, 1); - pq3_mp_up(bootpg); + /* we found a match */ + if (i != -1) { + /* map reset page to bootpg so we can copy code there */ + disable_tlb(i); + + set_tlb(1, 0xfffff000, bootpg, /* tlb, epn, rpn */ + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, /* perms, wimge */ + 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ + + memcpy((void *)0xfffff000, (void *)fixup, 4096); + flush_cache(0xfffff000, 4096); + + disable_tlb(i); + + /* setup reset page back to 1:1, we'll use HW boot translation + * to map this where we want + */ + set_tlb(1, 0xfffff000, 0xfffff000, /* tlb, epn, rpn */ + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, /* perms, wimge */ + 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ + + pq3_mp_up(bootpg); + } else { + puts("WARNING: No reset page TLB. " + "Skipping secondary core setup\n"); + } } -- 1.6.0.6

3 5

[U-Boot] [PATCH] Add support for the Calao QIL-A9G20 board
by Albin Tonnerre 09 Jan '10

09 Jan '10

The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936> Signed-off-by: Albin Tonnerre <albin.tonnerre(a)free-electrons.com> --- MAINTAINERS | 2 + MAKEALL | 2 + Makefile | 10 ++ board/calao/qil_a9g20/Makefile | 55 ++++++++++ board/calao/qil_a9g20/config.mk | 1 + board/calao/qil_a9g20/qil_a9g20.c | 201 +++++++++++++++++++++++++++++++++++++ board/calao/qil_a9g20/spi.c | 57 +++++++++++ include/configs/qil_a9g20.h | 200 ++++++++++++++++++++++++++++++++++++ 8 files changed, 528 insertions(+), 0 deletions(-) create mode 100644 board/calao/qil_a9g20/Makefile create mode 100644 board/calao/qil_a9g20/config.mk create mode 100644 board/calao/qil_a9g20/qil_a9g20.c create mode 100644 board/calao/qil_a9g20/spi.c create mode 100644 include/configs/qil_a9g20.h diff --git a/MAINTAINERS b/MAINTAINERS index e9db278..b1e82f4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -696,6 +696,8 @@ Andrea Scian <andrea.scian(a)dave-tech.it> Albin Tonnerre <albin.tonnerre(a)free-electrons.com> + qil_a9260 ARM926EJS (AT91SAM9260 SoC) + qil_a9g20 ARM926EJS (AT91SAM9G20 SoC) sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC) tny_a9260 ARM926EJS (AT91SAM9260 SoC) tny_a9g20 ARM926EJS (AT91SAM9G20 SoC) diff --git a/MAKEALL b/MAKEALL index f0ed8ea..531a667 100755 --- a/MAKEALL +++ b/MAKEALL @@ -614,6 +614,8 @@ LIST_at91=" \ m501sk \ pm9261 \ pm9263 \ + QIL_A9260 \ + QIL_A9G20 \ SBC35_A9G20 \ TNY_A9260 \ TNY_A9G20 \ diff --git a/Makefile b/Makefile index 0449a5b..eb542a4 100644 --- a/Makefile +++ b/Makefile @@ -2897,6 +2897,16 @@ at91sam9g45ekes_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 +QIL_A9G20_NANDFLASH_config \ +QIL_A9G20_EEPROM_config \ +QIL_A9G20_config \ +QIL_A9260_NANDFLASH_config \ +QIL_A9260_EEPROM_config \ +QIL_A9260_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -a qil_a9g20 arm arm926ejs qil_a9g20 calao at91 + SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig diff --git a/board/calao/qil_a9g20/Makefile b/board/calao/qil_a9g20/Makefile new file mode 100644 index 0000000..07783bf --- /dev/null +++ b/board/calao/qil_a9g20/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop(a)leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += qil_a9g20.o +COBJS-$(CONFIG_ATMEL_SPI) += spi.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/calao/qil_a9g20/config.mk b/board/calao/qil_a9g20/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/calao/qil_a9g20/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/calao/qil_a9g20/qil_a9g20.c b/board/calao/qil_a9g20/qil_a9g20.c new file mode 100644 index 0000000..38f4cce --- /dev/null +++ b/board/calao/qil_a9g20/qil_a9g20.c @@ -0,0 +1,201 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop(a)leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Copyright (C) 2009 + * Albin Tonnerre, Free-Electrons <albin.tonnerre(a)free-electrons.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +#ifdef CONFIG_CMD_NAND +static void qil_a9g20_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void qil_a9g20_macb_hw_init(void) +{ + unsigned long rstc; + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + + rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL; + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (rstc) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_macb_hw_init(); +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + +#ifdef CONFIG_QIL_A9G20 + gd->bd->bi_arch_number = MACH_TYPE_QIL_A9G20; +#else + gd->bd->bi_arch_number = MACH_TYPE_QIL_A9260; +#endif + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91_serial_hw_init(); + qil_a9g20_nand_hw_init(); +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 4 | 1 << 5); +#endif +#ifdef CONFIG_MACB + qil_a9g20_macb_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE) + return -1; + + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); +#endif + return rc; +} diff --git a/board/calao/qil_a9g20/spi.c b/board/calao/qil_a9g20/spi.c new file mode 100644 index 0000000..035a89f --- /dev/null +++ b/board/calao/qil_a9g20/spi.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons <albin.tonnerre(a)free-electrons.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_spi.h> +#include <asm/arch/gpio.h> +#include <spi.h> + +#define QIL_A9G20_CS0_PIN AT91_PIN_PA3 +#define QIL_A9G20_CS1_PIN AT91_PIN_PC11 + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && (cs == 1 || cs == 0); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + if(slave->cs == 0) + at91_set_gpio_value(QIL_A9G20_CS0_PIN, 0); + else if(slave->cs == 1) + at91_set_gpio_value(QIL_A9G20_CS1_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + if(slave->cs == 0) + at91_set_gpio_value(QIL_A9G20_CS0_PIN, 1); + else if(slave->cs == 1) + at91_set_gpio_value(QIL_A9G20_CS1_PIN, 1); +} + +void spi_init_f(void) +{ + /* everything done in board_init */ +} diff --git a/include/configs/qil_a9g20.h b/include/configs/qil_a9g20.h new file mode 100644 index 0000000..f6568a5 --- /dev/null +++ b/include/configs/qil_a9g20.h @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons <albin.tonnerre(a)free-electrons.com> + * + * Configuation settings for the Calao QIL-A9G20 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#if defined(CONFIG_QIL_A9G20_NANDFLASH) || defined(CONFIG_QIL_A9G20_EEPROM) +#define CONFIG_QIL_A9G20 +#elif defined(CONFIG_QIL_A9260_NANDFLASH) || defined(CONFIG_QIL_A9260_EEPROM) +#define CONFIG_QIL_A9260 +#endif + +#ifdef CONFIG_QIL_A9G20 +#define CONFIG_AT91SAM9G20 +#else +#define CONFIG_AT91SAM9260 +#endif + +#if defined(CONFIG_QIL_A9G20_NANDFLASH) || defined(CONFIG_QIL_A9260_NANDFLASH) +#define CONFIG_ENV_IS_IN_NAND +#else +#define CONFIG_ENV_IS_IN_EEPROM +#endif + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* SPI EEPROM */ +#define CONFIG_SPI +#define CONFIG_CMD_SPI +#define CONFIG_ATMEL_SPI +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) + +#define CONFIG_CMD_EEPROM +#define CONFIG_SPI_M95XXX +#define CONFIG_SYS_EEPROM_SIZE 0x10000 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 + +/* SPI RTC */ +#define CONFIG_CMD_DATE +#define CONFIG_RTC_M41T94 +#define CONFIG_M41T94_SPI_BUS 0 +#define CONFIG_M41T94_SPI_CS 0 + +/* NAND flash */ +#define CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 +#define CONFIG_MACB_SEARCH_PHY 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +/* Env in EEPROM, bootstrap + u-boot in NAND*/ +#ifdef CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_OFFSET 0x20 +#define CONFIG_ENV_SIZE 0x1000 +#endif + +/* Env, bootstrap and u-boot in NAND */ +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 +#endif + +#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock1 " \ + "mtdparts=atmel_nand:16M(kernel)ro," \ + "120M(rootfs),-(other) " \ + "rw rootfstype=jffs2" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif -- 1.6.3.3

2 2

[U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board
by Fred Fan 29 Dec '09

29 Dec '09

This patch just supports boot into u-boot from mmc or spi-nor flash. It just implements console, iomux and clock. There are no ethernet, nor-flash, mmc or other peripheral drivers. Signed-off-by: Fred.Fan <fanyefeng(a)gmail.com> Signed-off-by: Fred.Fan <r01011(a)freescale.com> --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/freescale/mx51_babbage/Makefile | 49 ++ board/freescale/mx51_babbage/board-mx51_babbage.h | 64 ++ board/freescale/mx51_babbage/config.mk | 2 + board/freescale/mx51_babbage/flash_header.S | 119 ++++ board/freescale/mx51_babbage/lowlevel_init.S | 245 ++++++++ board/freescale/mx51_babbage/mx51_babbage.c | 237 ++++++++ board/freescale/mx51_babbage/u-boot.lds | 72 +++ cpu/arm_cortexa8/mx51/Makefile | 50 ++ cpu/arm_cortexa8/mx51/clock.c | 237 ++++++++ cpu/arm_cortexa8/mx51/crm_regs.h | 673 +++++++++++++++++++++ cpu/arm_cortexa8/mx51/interrupts.c | 33 + cpu/arm_cortexa8/mx51/iomux.c | 199 ++++++ cpu/arm_cortexa8/mx51/soc.c | 66 ++ cpu/arm_cortexa8/mx51/timer.c | 112 ++++ drivers/serial/serial_mxc.c | 6 + include/asm-arm/arch-mx51/iomux.h | 240 ++++++++ include/asm-arm/arch-mx51/mx51.h | 416 +++++++++++++ include/asm-arm/arch-mx51/mx51_pins.h | 370 +++++++++++ include/configs/mx51_babbage.h | 174 ++++++ 22 files changed, 3372 insertions(+), 0 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 620604c..260c37e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -549,6 +549,10 @@ Fabio Estevam <Fabio.Estevam(a)freescale.com> mx31pdk i.MX31 +Fred Fan <fanyefeng(a)gmail.com> + + mx51_babbage i.MX51 + Peter Figuli <peposh(a)etc.sk> wepep250 xscale diff --git a/MAKEALL b/MAKEALL index edebaea..852baf1 100755 --- a/MAKEALL +++ b/MAKEALL @@ -581,6 +581,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_pandora \ omap3_zoom1 \ omap3_zoom2 \ + mx51_babbage \ " ######################################################################### diff --git a/Makefile b/Makefile index e4499d7..b4e65ff 100644 --- a/Makefile +++ b/Makefile @@ -3229,6 +3229,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51_babbage_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51_babbage freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx diff --git a/board/freescale/mx51_babbage/Makefile b/board/freescale/mx51_babbage/Makefile new file mode 100644 index 0000000..7e33861 --- /dev/null +++ b/board/freescale/mx51_babbage/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := mx51_babbage.o +SOBJS := lowlevel_init.o flash_header.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx51_babbage/board-mx51_babbage.h b/board/freescale/mx51_babbage/board-mx51_babbage.h new file mode 100644 index 0000000..31e3875 --- /dev/null +++ b/board/freescale/mx51_babbage/board-mx51_babbage.h @@ -0,0 +1,64 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __BOARD_FREESCALE_BOARD_MX51_BABBAGE_H__ +#define __BOARD_FREESCALE_BOARD_MX51_BABBAGE_H__ + +/*! + * @defgroup BRDCFG_MX51_BABBAGE Board Configuration Options + * @ingroup MSL_MX51_BABBAGE + */ + +/*! + * @file mx51_babbage/board-mx51_babbage.h + * + * @brief This file contains all the board level configuration options. + * + * It currently hold the options defined for MX51 babbage Platform. + * + * @ingroup BRDCFG_MX51_BABBAGE + */ + +/* CPLD offsets */ +#define PBC_LED_CTRL (0x20000) +#define PBC_SB_STAT (0x20008) +#define PBC_ID_AAAA (0x20040) +#define PBC_ID_5555 (0x20048) +#define PBC_VERSION (0x20050) +#define PBC_ID_CAFE (0x20058) +#define PBC_INT_STAT (0x20010) +#define PBC_INT_MASK (0x20038) +#define PBC_INT_REST (0x20020) +#define PBC_SW_RESET (0x20060) + +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#endif /* __BOARD_FREESCALE_BOARD_MX51_BABBAGE_H__ */ diff --git a/board/freescale/mx51_babbage/config.mk b/board/freescale/mx51_babbage/config.mk new file mode 100644 index 0000000..d8b0f10 --- /dev/null +++ b/board/freescale/mx51_babbage/config.mk @@ -0,0 +1,2 @@ +LDSCRIPT = board/$(VENDOR)/$(BOARD)/u-boot.lds +TEXT_BASE = 0x97800000 diff --git a/board/freescale/mx51_babbage/flash_header.S b/board/freescale/mx51_babbage/flash_header.S new file mode 100644 index 0000000..bbac2c1 --- /dev/null +++ b/board/freescale/mx51_babbage/flash_header.S @@ -0,0 +1,119 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/*! + * @file mx51_babbage/flash_head.S + * @brief Thie file contains the information as the image header for boot. + * The boot rom code will parse this structure , load image and initial + * hardware as the description of hardware setting. + */ + +#include <config.h> +#include <asm/arch/mx51.h> +#include "board-mx51_babbage.h" + +#ifdef CONFIG_FLASH_HEADER +#ifndef CONFIG_FLASH_HEADER_OFFSET +# error "Must define the offset of flash header" +#endif +#define MXC_DCD_ITEM(i, type, addr, val) \ +dcd_node_##i: \ + .word type ; \ + .word addr ; \ + .word val ; \ + +.section ".text.flasheader", "x" + b _start + .org CONFIG_FLASH_HEADER_OFFSET +app_code_jump_v: .word _start +app_code_code_barker: .word CONFIG_FLASH_HEADER_BARKER +app_code_csf: .word 0 +dcd_ptr_ptr: .word dcd_ptr +super_root_key: .word 0 +dcd_ptr: .word dcd_array_start +app_dest_ptr: .word TEXT_BASE +dcd_array_start: +magic: .word 0xB17219E9 +dcd_array_size: .word dcd_data_end - dcd_array_start - 8 +/* DCD */ +/* DDR2 IOMUX configuration */ +MXC_DCD_ITEM(1, 4, IOMUXC_BASE_ADDR + 0x8a0, 0x200) +MXC_DCD_ITEM(2, 4, IOMUXC_BASE_ADDR + 0x50c, 0x20c5) +MXC_DCD_ITEM(3, 4, IOMUXC_BASE_ADDR + 0x510, 0x20c5) +MXC_DCD_ITEM(4, 4, IOMUXC_BASE_ADDR + 0x83c, 0x2) +MXC_DCD_ITEM(5, 4, IOMUXC_BASE_ADDR + 0x848, 0x2) +MXC_DCD_ITEM(6, 4, IOMUXC_BASE_ADDR + 0x4b8, 0xe7) +MXC_DCD_ITEM(7, 4, IOMUXC_BASE_ADDR + 0x4bc, 0x45) +MXC_DCD_ITEM(8, 4, IOMUXC_BASE_ADDR + 0x4c0, 0x45) +MXC_DCD_ITEM(9, 4, IOMUXC_BASE_ADDR + 0x4c4, 0x45) +MXC_DCD_ITEM(10, 4, IOMUXC_BASE_ADDR + 0x4c8, 0x45) +MXC_DCD_ITEM(11, 4, IOMUXC_BASE_ADDR + 0x820, 0x0) +MXC_DCD_ITEM(12, 4, IOMUXC_BASE_ADDR + 0x4a4, 0x3) +MXC_DCD_ITEM(13, 4, IOMUXC_BASE_ADDR + 0x4a8, 0x3) +MXC_DCD_ITEM(14, 4, IOMUXC_BASE_ADDR + 0x4ac, 0xe3) +MXC_DCD_ITEM(15, 4, IOMUXC_BASE_ADDR + 0x4b0, 0xe3) +MXC_DCD_ITEM(16, 4, IOMUXC_BASE_ADDR + 0x4b4, 0xe3) +MXC_DCD_ITEM(17, 4, IOMUXC_BASE_ADDR + 0x4cc, 0xe3) +MXC_DCD_ITEM(18, 4, IOMUXC_BASE_ADDR + 0x4d0, 0xe2) +/* Set drive strength to MAX */ +MXC_DCD_ITEM(19, 4, IOMUXC_BASE_ADDR + 0x82c, 0x6) +MXC_DCD_ITEM(20, 4, IOMUXC_BASE_ADDR + 0x8a4, 0x6) +MXC_DCD_ITEM(21, 4, IOMUXC_BASE_ADDR + 0x8ac, 0x6) +MXC_DCD_ITEM(22, 4, IOMUXC_BASE_ADDR + 0x8b8, 0x6) +/* 13 ROW, 10 COL, 32Bit, SREF=4 Micron Model */ +/* CAS=3, BL=4 */ +MXC_DCD_ITEM(23, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL0, 0x82a20000) +MXC_DCD_ITEM(24, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL1, 0x82a20000) +MXC_DCD_ITEM(25, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDMISC, 0x000ad0d0) +MXC_DCD_ITEM(26, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCFG0, 0x333574aa) +MXC_DCD_ITEM(27, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCFG1, 0x333574aa) +/* Init DRAM on CS0 */ +MXC_DCD_ITEM(28, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x04008008) +MXC_DCD_ITEM(29, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801a) +MXC_DCD_ITEM(30, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801b) +MXC_DCD_ITEM(31, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00448019) +MXC_DCD_ITEM(32, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x07328018) +MXC_DCD_ITEM(33, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x04008008) +MXC_DCD_ITEM(34, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008010) +MXC_DCD_ITEM(35, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008010) +MXC_DCD_ITEM(36, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x06328018) +MXC_DCD_ITEM(37, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x03808019) +MXC_DCD_ITEM(38, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00408019) +MXC_DCD_ITEM(39, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008000) +/* Init DRAM on CS1 */ +MXC_DCD_ITEM(40, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0400800c) +MXC_DCD_ITEM(41, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801e) +MXC_DCD_ITEM(42, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801f) +MXC_DCD_ITEM(43, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0000801d) +MXC_DCD_ITEM(44, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0732801c) +MXC_DCD_ITEM(45, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0400800c) +MXC_DCD_ITEM(46, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008014) +MXC_DCD_ITEM(47, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008014) +MXC_DCD_ITEM(48, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0632801c) +MXC_DCD_ITEM(49, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0380801d) +MXC_DCD_ITEM(50, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x0040801d) +MXC_DCD_ITEM(51, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00008004) +MXC_DCD_ITEM(52, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL0, 0xb2a20000) +MXC_DCD_ITEM(53, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCTL1, 0xb2a20000) +MXC_DCD_ITEM(54, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDMISC, 0x000ad6d0) +MXC_DCD_ITEM(55, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDCDLYGD, 0x90000000) +MXC_DCD_ITEM(56, 4, ESDCTL_BASE_ADDR + ESDCTL_ESDSCR, 0x00000000) +dcd_data_end: +image_len: .word 0x100000 +#endif diff --git a/board/freescale/mx51_babbage/lowlevel_init.S b/board/freescale/mx51_babbage/lowlevel_init.S new file mode 100644 index 0000000..bf536b1 --- /dev/null +++ b/board/freescale/mx51_babbage/lowlevel_init.S @@ -0,0 +1,245 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mx51.h> +#include "board-mx51_babbage.h" + +/* + * return soc version + * 0x10: TO1 + * 0x20: TO2 + * 0x30: TO3 + */ +.macro check_soc_version ret, tmp +.endm + +/* + * L2CC Cache setup/invalidation/disable + */ +.macro init_l2cc + /* reconfigure L2 cache aux control reg */ + ldr r0, =0x03C000C4 + mcr p15, 1, r0, c9, c0, 2 +.endm /* init_l2cc */ + +/* AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x0] + str r1, [r0, #0x4] + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ +.endm /* init_aips */ + +/* MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max +.endm /* init_max */ + +/* M4IF setup */ +.macro init_m4if + /* VPU and IPU given higher priority (0x4) + * IPU accesses with ID=0x1 given highest priority (=0xA) + */ + ldr r0, =M4IF_BASE_ADDR + + ldr r1, =0x00000203 + str r1, [r0, #0x40] + + ldr r1, =0x0 + str r1, [r0, #0x44] + + ldr r1, =0x00120125 + str r1, [r0, #0x9C] + + ldr r1, =0x001901A3 + str r1, [r0, #0x48] + +/* + ldr r1, =0x00000a01 + str r1, [r0, #0x48] + ldr r1, =0x00000404 + str r1, [r0, #0x40] +*/ +.endm /* init_m4if */ + +.macro setup_pll pll, freq + ldr r2, =\pll + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + + str r3, [r2, #PLL_DP_OP] + str r3, [r2, #PLL_DP_HFS_OP] + + str r4, [r2, #PLL_DP_MFD] + str r4, [r2, #PLL_DP_HFS_MFD] + + str r5, [r2, #PLL_DP_MFN] + str r5, [r2, #PLL_DP_HFS_MFN] + + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] +1: ldr r1, [r2, #PLL_DP_CTL] + ands r1, r1, #0x1 + beq 1b +.endm + +.macro init_clock + ldr r0, =CCM_BASE_ADDR + mov r1, #0x00060000 + str r1, [r0, #CLKCTL_CCDR] + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + + mov r3, #DP_OP_800 + mov r4, #DP_MFD_800 + mov r5, #DP_MFN_800 + setup_pll PLL1_BASE_ADDR + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL3_BASE_ADDR + + /* Switch peripheral to PLL 3 */ + ldr r1, =0x0000D3C0 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x033B9145 + str r1, [r0, #CLKCTL_CBCDR] + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL2_BASE_ADDR + + /* Switch peripheral to PLL2 */ + ldr r1, =0x013B9145 + str r1, [r0, #CLKCTL_CBCDR] + ldr r1, =0x0000E3C0 + str r1, [r0, #CLKCTL_CBCMR] + + mov r3, #DP_OP_216 + mov r4, #DP_MFD_216 + mov r5, #DP_MFN_216 + setup_pll PLL3_BASE_ADDR + + /* Set the platform clock dividers */ + ldr r2, =ARM_BASE_ADDR + ldr r1, =0x00000725 + str r1, [r2, #0x14] + + /* Switch ARM back to PLL 1 */ + mov r1, #0 + str r1, [r0, #CLKCTL_CCSR] + str r1, [r0, #CLKCTL_CACRR] + + /* Use lp_apm (24MHz) source for perclk */ + mov r2, #0x48 + ldr r2, [r0] + cmp r2, #0x10 + ldrhs r1, =0x000020C2 + ldrlo r1, =0x0000E3C2 + str r1, [r0, #CLKCTL_CBCMR] + /* TO1.x emi = ahb, all perclk dividers are 1 since using 24MHz */ + /* TO2.x ddr from PLL1, all perclk dividers are 1 since using 24MHz */ + ldrhs r1, =0x59239100 + ldrlo r1, =0x013D9100 + strlo r1, [r0, #CLKCTL_CBCDR] + + /* use PLL2 for UART source, get 66.5MHz */ + ldr r1, =0xA5A2A020 + str r1, [r0, #CLKCTL_CSCMR1] + ldr r1, =0x00C30321 + str r1, [r0, #CLKCTL_CSCDR1] + + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0 + bne 1b + + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCDR] +.endm + +.macro setup_wdog + ldr r0, =WDOG1_BASE_ADDR + mov r1, #0x30 + strh r1, [r0] +.endm + +.section ".text.init", "x" + +.globl lowlevel_init +lowlevel_init: + /* Platform CHIP level init*/ + ldr r0, =GPIO1_BASE_ADDR + ldr r1, [r0, #0x0] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x0] + ldr r1, [r0, #0x4] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x4] + + mrc 15, 0, r1, c1, c0, 0 + + mrc 15, 0, r0, c1, c0, 1 + bic r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 + + mcr 15, 0, r1, c1, c0, 0 + + mov r0, #0 + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + + init_l2cc + + init_aips + + init_max + + init_m4if + + init_clock + + /* r12 saved upper lr*/ + mov pc, lr + +/* Board level setting value */ +DDR_PERCHARGE_CMD: .word 0x04008008 +DDR_REFRESH_CMD: .word 0x00008010 +DDR_LMR1_W: .word 0x00338018 +DDR_LMR_CMD: .word 0xB2220000 +DDR_TIMING_W: .word 0xB02567A9 +DDR_MISC_W: .word 0x000A0104 diff --git a/board/freescale/mx51_babbage/mx51_babbage.c b/board/freescale/mx51_babbage/mx51_babbage.c new file mode 100644 index 0000000..54c1c3e --- /dev/null +++ b/board/freescale/mx51_babbage/mx51_babbage.c @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> +#include <asm/arch/iomux.h> +#include <asm/errno.h> +#include <i2c.h> +#include "board-mx51_babbage.h" + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; +u32 mx51_io_base_addr; +volatile u32 *esdhc_base_pointer; + +u32 get_board_rev(void) +{ + return system_rev; +} + +static inline void setup_soc_rev(void) +{ + int reg; + + reg = __raw_readl(ROM_SI_REV); + switch (reg) { + case 0x02: + system_rev = 0x51000 | CHIP_REV_1_1; + break; + case 0x10: + if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) + system_rev = 0x51000 | CHIP_REV_2_5; + else + system_rev = 0x51000 | CHIP_REV_2_0; + break; + default: + system_rev = 0x51000 | CHIP_REV_1_0; + break; + } +} + +static inline void set_board_rev(int rev) +{ + system_rev |= (rev & 0xF) << 8; +} + +inline int is_soc_rev(int rev) +{ + return (system_rev & 0xFF) - rev; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + return 0; +} + +static void setup_uart(void) +{ + unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; + + mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); + mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); +} + +void setup_nfc(void) +{ + /* Enable NFC IOMUX */ + mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT0); +} + +static void setup_expio(void) +{ + u32 reg; + + /* CS5 setup */ + mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0); + writel(0x00410089, WEIM_BASE_ADDR + 0x78 + CSGCR1); + writel(0x00000002, WEIM_BASE_ADDR + 0x78 + CSGCR2); + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, WEIM_BASE_ADDR + 0x78 + CSRCR1); + /* APR = 0 */ + writel(0x00000000, WEIM_BASE_ADDR + 0x78 + CSRCR2); + /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0, + * WCSA=0, WCSN=0 + */ + writel(0x72080F00, WEIM_BASE_ADDR + 0x78 + CSWCR1); + if ((readw(CS5_BASE_ADDR + PBC_ID_AAAA) == 0xAAAA) && + (readw(CS5_BASE_ADDR + PBC_ID_5555) == 0x5555)) { + if (is_soc_rev(CHIP_REV_2_0) < 0) { + reg = readl(CCM_BASE_ADDR + CLKCTL_CBCDR); + reg = (reg & (~0x70000)) | 0x30000; + writel(reg, CCM_BASE_ADDR + CLKCTL_CBCDR); + /* make sure divider effective */ + while (readl(CCM_BASE_ADDR + CLKCTL_CDHIPR) != 0) + ; + writel(0x0, CCM_BASE_ADDR + CLKCTL_CCDR); + } + mx51_io_base_addr = CS5_BASE_ADDR; + } else { + /* CS1 */ + writel(0x00410089, WEIM_BASE_ADDR + 0x18 + CSGCR1); + writel(0x00000002, WEIM_BASE_ADDR + 0x18 + CSGCR2); + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, WEIM_BASE_ADDR + 0x18 + CSRCR1); + /* APR=0 */ + writel(0x00000000, WEIM_BASE_ADDR + 0x18 + CSRCR2); + /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, + * WEN=0, WCSA=0, WCSN=0 + */ + writel(0x72080F00, WEIM_BASE_ADDR + 0x18 + CSWCR1); + mx51_io_base_addr = CS1_BASE_ADDR; + } + + /* Reset interrupt status reg */ + writew(0x1F, mx51_io_base_addr + PBC_INT_REST); + writew(0x00, mx51_io_base_addr + PBC_INT_REST); + writew(0xFFFF, mx51_io_base_addr + PBC_INT_MASK); + + /* Reset the XUART and Ethernet controllers */ + reg = readw(mx51_io_base_addr + PBC_SW_RESET); + reg |= 0x9; + writew(reg, mx51_io_base_addr + PBC_SW_RESET); + reg &= ~0x9; + writew(reg, mx51_io_base_addr + PBC_SW_RESET); +} + +#ifdef CONFIG_NET_MULTI + +#if defined(CONFIG_DRIVER_SMC911X) +extern int smc911x_initialize(bd_t *bis); +#endif +int board_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_DRIVER_SMC911X) + rc = smc911x_initialize(bis); +#endif + + return rc; +} +#endif + +int board_init(void) +{ + setup_soc_rev(); + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + setup_uart(); + setup_nfc(); + setup_expio(); + return 0; +} + +#ifdef BOARD_LATE_INIT +int board_late_init(void) +{ + return 0; +} +#endif + +int checkboard(void) +{ + printf("Board: MX51 BABBAGE "); + + if (system_rev & CHIP_REV_2_5) + printf("2.5 ["); + else if (system_rev & CHIP_REV_2_0) + printf("2.0 ["); + else if (system_rev & CHIP_REV_1_1) + printf("1.1 ["); + else + printf("1.0 ["); + + switch (__raw_readl(SRC_BASE_ADDR + 0x8)) { + case 0x0001: + printf("POR"); + break; + case 0x0009: + printf("RST"); + break; + case 0x0010: + case 0x0011: + printf("WDOG"); + break; + default: + printf("unknown"); + break; + } + printf("]\n"); + return 0; +} + diff --git a/board/freescale/mx51_babbage/u-boot.lds b/board/freescale/mx51_babbage/u-boot.lds new file mode 100644 index 0000000..f608a6d --- /dev/null +++ b/board/freescale/mx51_babbage/u-boot.lds @@ -0,0 +1,72 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + board/freescale/mx51_babbage/flash_header.o (.text.flasheader) + cpu/arm_cortexa8/start.o + board/freescale/mx51_babbage/libmx51_babbage.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) + drivers/mmc/libmmc.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/arm_cortexa8/mx51/Makefile b/cpu/arm_cortexa8/mx51/Makefile new file mode 100644 index 0000000..fc7e755 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS-y = soc.o timer.o clock.o iomux.o +SOBJS-y = + +COBJS-$(CONFIG_USE_IRQ) += interrupts.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm_cortexa8/mx51/clock.c b/cpu/arm_cortexa8/mx51/clock.c new file mode 100644 index 0000000..3abcdc8 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/clock.c @@ -0,0 +1,237 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/errno.h> +#include "crm_regs.h" + +enum pll_clocks { + PLL1_CLK = MXC_DPLL1_BASE, + PLL2_CLK = MXC_DPLL2_BASE, + PLL3_CLK = MXC_DPLL3_BASE, +}; + +enum pll_sw_clocks { + PLL1_SW_CLK, + PLL2_SW_CLK, + PLL3_SW_CLK, +}; + +static u32 __decode_pll(enum pll_clocks pll, u32 infreq) +{ + u32 mfi, mfn, mfd, pd; + + mfn = __raw_readl(pll + MXC_PLL_DP_MFN); + mfd = __raw_readl(pll + MXC_PLL_DP_MFD) + 1; + mfi = __raw_readl(pll + MXC_PLL_DP_OP); + pd = (mfi & 0xF) + 1; + mfi = (mfi >> 4) & 0xF; + mfi = (mfi >= 5) ? mfi : 5; + + return ((4 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000; +} + +u32 __get_mcu_main_clk(void) +{ + u32 reg, freq; + + reg = (__raw_readl(MXC_CCM_CACRR) & MXC_CCM_CACRR_ARM_PODF_MASK) >> + MXC_CCM_CACRR_ARM_PODF_OFFSET; + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + return freq / (reg + 1); +} + +static u32 __get_periph_clk(void) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCDR); + if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { + reg = __raw_readl(MXC_CCM_CBCMR); + switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { + case 0: + return __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + case 1: + return __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + default: + return 0; + } + } + return __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); +} + +static u32 __get_ipg_clk(void) +{ + u32 ahb_podf, ipg_podf; + + ahb_podf = __raw_readl(MXC_CCM_CBCDR); + ipg_podf = (ahb_podf & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET; + ahb_podf = (ahb_podf & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET; + return __get_periph_clk() / ((ahb_podf + 1) * (ipg_podf + 1)); +} + +static u32 __get_ipg_per_clk(void) +{ + u32 pred1, pred2, podf; + + if (__raw_readl(MXC_CCM_CBCMR) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) + return __get_ipg_clk(); + /* Fixme: not handle what about lpm*/ + podf = __raw_readl(MXC_CCM_CBCDR); + pred1 = (podf & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET; + pred2 = (podf & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET; + podf = (podf & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET; + + return __get_periph_clk() / ((pred1 + 1) * (pred2 + 1) * (podf + 1)); +} + +static u32 __get_uart_clk(void) +{ + unsigned int freq, reg, pred, podf; + + reg = __raw_readl(MXC_CCM_CSCMR1); + switch ((reg & MXC_CCM_CSCMR1_UART_CLK_SEL_MASK) >> + MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { + case 0x0: + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + break; + case 0x1: + freq = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); + break; + case 0x2: + freq = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + break; + default: + return 66500000; + } + + reg = __raw_readl(MXC_CCM_CSCDR1); + + pred = (reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET; + + podf = (reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; + freq /= (pred + 1) * (podf + 1); + + return freq; +} + +/*! ++ * This function returns the low power audio clock. ++ */ +u32 get_lp_apm(void) +{ + u32 ret_val = 0; + u32 ccsr = __raw_readl(MXC_CCM_CCSR); + + if (((ccsr >> 9) & 1) == 0) + ret_val = CONFIG_MX51_HCLK_FREQ; + else + ret_val = ((32768 * 1024)); + + return ret_val; +} + +static u32 __get_cspi_clk(void) +{ + u32 ret_val = 0, pdf, pre_pdf, clk_sel; + u32 cscmr1 = __raw_readl(MXC_CCM_CSCMR1); + u32 cscdr2 = __raw_readl(MXC_CCM_CSCDR2); + + pre_pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + clk_sel = (cscmr1 & MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK) \ + >> MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + + switch (clk_sel) { + case 0: + ret_val = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case 1: + ret_val = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case 2: + ret_val = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + default: + ret_val = get_lp_apm() / ((pre_pdf + 1) * (pdf + 1)); + break; + } + + return ret_val; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return __get_mcu_main_clk(); + case MXC_AHB_CLK: + break; + case MXC_IPG_CLK: + return __get_ipg_clk(); + case MXC_IPG_PERCLK: + return __get_ipg_per_clk(); + case MXC_UART_CLK: + return __get_uart_clk(); + case MXC_CSPI_CLK: + return __get_cspi_clk(); + case MXC_FEC_CLK: + return __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + default: + break; + } + return -1; +} + +void mxc_show_clocks(void) +{ + u32 freq; + + freq = __decode_pll(PLL1_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll1: %dMHz\n", freq / 1000000); + freq = __decode_pll(PLL2_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll2: %dMHz\n", freq / 1000000); + freq = __decode_pll(PLL3_CLK, CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll3: %dMHz\n", freq / 1000000); + printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK)); + printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK)); + printf("uart clock : %dHz\n", mxc_get_clock(MXC_UART_CLK)); + printf("cspi clock : %dHz\n", mxc_get_clock(MXC_CSPI_CLK)); +} diff --git a/cpu/arm_cortexa8/mx51/crm_regs.h b/cpu/arm_cortexa8/mx51/crm_regs.h new file mode 100644 index 0000000..6436bed --- /dev/null +++ b/cpu/arm_cortexa8/mx51/crm_regs.h @@ -0,0 +1,673 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__ + +#define MXC_CCM_BASE CCM_BASE_ADDR +#define MXC_DPLL1_BASE PLL1_BASE_ADDR +#define MXC_DPLL2_BASE PLL2_BASE_ADDR +#define MXC_DPLL3_BASE PLL3_BASE_ADDR + +/* PLL Register Offsets */ +#define MXC_PLL_DP_CTL 0x00 +#define MXC_PLL_DP_CONFIG 0x04 +#define MXC_PLL_DP_OP 0x08 +#define MXC_PLL_DP_MFD 0x0C +#define MXC_PLL_DP_MFN 0x10 +#define MXC_PLL_DP_MFNMINUS 0x14 +#define MXC_PLL_DP_MFNPLUS 0x18 +#define MXC_PLL_DP_HFS_OP 0x1C +#define MXC_PLL_DP_HFS_MFD 0x20 +#define MXC_PLL_DP_HFS_MFN 0x24 +#define MXC_PLL_DP_MFN_TOGC 0x28 +#define MXC_PLL_DP_DESTAT 0x2c + +/* PLL Register Bit definitions */ +#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000 +#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 +#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12 +#define MXC_PLL_DP_CTL_ADE 0x800 +#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 +#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8) +#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8 +#define MXC_PLL_DP_CTL_HFSM 0x80 +#define MXC_PLL_DP_CTL_PRE 0x40 +#define MXC_PLL_DP_CTL_UPEN 0x20 +#define MXC_PLL_DP_CTL_RST 0x10 +#define MXC_PLL_DP_CTL_RCP 0x8 +#define MXC_PLL_DP_CTL_PLM 0x4 +#define MXC_PLL_DP_CTL_BRM0 0x2 +#define MXC_PLL_DP_CTL_LRF 0x1 + +#define MXC_PLL_DP_CONFIG_BIST 0x8 +#define MXC_PLL_DP_CONFIG_SJC_CE 0x4 +#define MXC_PLL_DP_CONFIG_AREN 0x2 +#define MXC_PLL_DP_CONFIG_LDREQ 0x1 + +#define MXC_PLL_DP_OP_MFI_OFFSET 4 +#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4) +#define MXC_PLL_DP_OP_PDF_OFFSET 0 +#define MXC_PLL_DP_OP_PDF_MASK 0xF + +#define MXC_PLL_DP_MFD_OFFSET 0 +#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_OFFSET 0x0 +#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17) +#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16) +#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0 +#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF + +#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31) +#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF + +/* Register addresses of CCM*/ +#define MXC_CCM_CCR (MXC_CCM_BASE + 0x00) +#define MXC_CCM_CCDR (MXC_CCM_BASE + 0x04) +#define MXC_CCM_CSR (MXC_CCM_BASE + 0x08) +#define MXC_CCM_CCSR (MXC_CCM_BASE + 0x0C) +#define MXC_CCM_CACRR (MXC_CCM_BASE + 0x10) +#define MXC_CCM_CBCDR (MXC_CCM_BASE + 0x14) +#define MXC_CCM_CBCMR (MXC_CCM_BASE + 0x18) +#define MXC_CCM_CSCMR1 (MXC_CCM_BASE + 0x1C) +#define MXC_CCM_CSCMR2 (MXC_CCM_BASE + 0x20) +#define MXC_CCM_CSCDR1 (MXC_CCM_BASE + 0x24) +#define MXC_CCM_CS1CDR (MXC_CCM_BASE + 0x28) +#define MXC_CCM_CS2CDR (MXC_CCM_BASE + 0x2C) +#define MXC_CCM_CDCDR (MXC_CCM_BASE + 0x30) +#define MXC_CCM_CHSCDR (MXC_CCM_BASE + 0x34) +#define MXC_CCM_CSCDR2 (MXC_CCM_BASE + 0x38) +#define MXC_CCM_CSCDR3 (MXC_CCM_BASE + 0x3C) +#define MXC_CCM_CSCDR4 (MXC_CCM_BASE + 0x40) +#define MXC_CCM_CWDR (MXC_CCM_BASE + 0x44) +#define MXC_CCM_CDHIPR (MXC_CCM_BASE + 0x48) +#define MXC_CCM_CDCR (MXC_CCM_BASE + 0x4C) +#define MXC_CCM_CTOR (MXC_CCM_BASE + 0x50) +#define MXC_CCM_CLPCR (MXC_CCM_BASE + 0x54) +#define MXC_CCM_CISR (MXC_CCM_BASE + 0x58) +#define MXC_CCM_CIMR (MXC_CCM_BASE + 0x5C) +#define MXC_CCM_CCOSR (MXC_CCM_BASE + 0x60) +#define MXC_CCM_CGPR (MXC_CCM_BASE + 0x64) +#define MXC_CCM_CCGR0 (MXC_CCM_BASE + 0x68) +#define MXC_CCM_CCGR1 (MXC_CCM_BASE + 0x6C) +#define MXC_CCM_CCGR2 (MXC_CCM_BASE + 0x70) +#define MXC_CCM_CCGR3 (MXC_CCM_BASE + 0x74) +#define MXC_CCM_CCGR4 (MXC_CCM_BASE + 0x78) +#define MXC_CCM_CCGR5 (MXC_CCM_BASE + 0x7C) +#define MXC_CCM_CCGR6 (MXC_CCM_BASE + 0x80) +#define MXC_CCM_CMEOR (MXC_CCM_BASE + 0x84) + +/* Define the bits in register CCR */ +#define MXC_CCM_CCR_COSC_EN (1 << 12) +#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11) +#define MXC_CCM_CCR_CAMP2_EN (1 << 10) +#define MXC_CCM_CCR_CAMP1_EN (1 << 9) +#define MXC_CCM_CCR_FPM_EN (1 << 8) +#define MXC_CCM_CCR_OSCNT_OFFSET (0) +#define MXC_CCM_CCR_OSCNT_MASK (0xFF) + +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18) +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) +#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16) + +/* Define the bits in register CSR */ +#define MXC_CCM_CSR_COSR_READY (1 << 5) +#define MXC_CCM_CSR_LVS_VALUE (1 << 4) +#define MXC_CCM_CSR_CAMP2_READY (1 << 3) +#define MXC_CCM_CSR_CAMP1_READY (1 << 2) +#define MXC_CCM_CSR_FPM_READY (1 << 1) +#define MXC_CCM_CSR_REF_EN_B (1 << 0) + +/* Define the bits in register CCSR */ +#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9) +#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7) +#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7) +#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5) +#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5) +#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3) +#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3) +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1) +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0) + +/* Define the bits in register CACRR */ +#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0) +#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7) + +/* Define the bits in register CBCDR */ +#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26) +#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25) +#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22) +#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22) +#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19) +#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19) +#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16) +#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16) +#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13) +#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13) +#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10) +#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) +#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8) +#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8) +#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6) +#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6) +#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3) +#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3) +#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0) +#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7) + +/* Define the bits in register CBCMR */ +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0) + +/* Define the bits in register CSCMR1 */ +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30) +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19) +#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11) +#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7) +#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1) + +/* Define the bits in register CSCMR2 */ +#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK (0x7 << 26) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5) +#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3) + +/* Define the bits in register CSCDR1 */ +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7) + +/* Define the bits in register CS1CDR and CS2CDR */ +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F) + +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDCDR */ +#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28) +#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3) +#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3) +#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0) +#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7) + +/* Define the bits in register CHSCCDR */ +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7) + +/* Define the bits in register CSCDR2 */ +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR3 */ +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR4 */ +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDHIPR */ +#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6) +#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4) +#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3) +#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2) +#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1) +#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0) + +/* Define the bits in register CDCR */ +#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3) + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23) +#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22) +#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20) +#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19) +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) +#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17) +#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16) +#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9) +#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) +#define MXC_CCM_CLPCR_VSTBY (0x1 << 8) +#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define MXC_CCM_CLPCR_SBYOS (0x1 << 6) +#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) +#define MXC_CCM_CLPCR_LPM_OFFSET (0) +#define MXC_CCM_CLPCR_LPM_MASK (0x3) + +/* Define the bits in register CISR */ +#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CISR_COSC_READY (0x1 << 6) +#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5) +#define MXC_CCM_CISR_CKIH_READY (0x1 << 4) +#define MXC_CCM_CISR_FPM_READY (0x1 << 3) +#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CISR_LRF_PLL1 (0x1) + +/* Define the bits in register CIMR */ +#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5) +#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4) +#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3) +#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1) + +/* Define the bits in register CCOSR */ +#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24) +#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21) +#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21) +#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16) +#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) +#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4) +#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) +#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0) +#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF) + +/* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4) +#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7) + +/* Define the bits in registers CCGRx */ +#define MXC_CCM_CCGR_CG_MASK 0x3 + +#define MXC_CCM_CCGR0_CG15_OFFSET 30 +#define MXC_CCM_CCGR0_CG15_MASK (0x3 << 30) +#define MXC_CCM_CCGR0_CG14_OFFSET 28 +#define MXC_CCM_CCGR0_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGR0_CG13_OFFSET 26 +#define MXC_CCM_CCGR0_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGR0_CG12_OFFSET 24 +#define MXC_CCM_CCGR0_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGR0_CG11_OFFSET 22 +#define MXC_CCM_CCGR0_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGR0_CG10_OFFSET 20 +#define MXC_CCM_CCGR0_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGR0_CG9_OFFSET 18 +#define MXC_CCM_CCGR0_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGR0_CG8_OFFSET 16 +#define MXC_CCM_CCGR0_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGR0_CG7_OFFSET 14 +#define MXC_CCM_CCGR0_CG6_OFFSET 12 +#define MXC_CCM_CCGR0_CG5_OFFSET 10 +#define MXC_CCM_CCGR0_CG5_MASK (0x3 << 10) +#define MXC_CCM_CCGR0_CG4_OFFSET 8 +#define MXC_CCM_CCGR0_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGR0_CG3_OFFSET 6 +#define MXC_CCM_CCGR0_CG3_MASK (0x3 << 6) +#define MXC_CCM_CCGR0_CG2_OFFSET 4 +#define MXC_CCM_CCGR0_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGR0_CG1_OFFSET 2 +#define MXC_CCM_CCGR0_CG1_MASK (0x3 << 2) +#define MXC_CCM_CCGR0_CG0_OFFSET 0 +#define MXC_CCM_CCGR0_CG0_MASK 0x3 + +#define MXC_CCM_CCGR1_CG15_OFFSET 30 +#define MXC_CCM_CCGR1_CG14_OFFSET 28 +#define MXC_CCM_CCGR1_CG13_OFFSET 26 +#define MXC_CCM_CCGR1_CG12_OFFSET 24 +#define MXC_CCM_CCGR1_CG11_OFFSET 22 +#define MXC_CCM_CCGR1_CG10_OFFSET 20 +#define MXC_CCM_CCGR1_CG9_OFFSET 18 +#define MXC_CCM_CCGR1_CG8_OFFSET 16 +#define MXC_CCM_CCGR1_CG7_OFFSET 14 +#define MXC_CCM_CCGR1_CG6_OFFSET 12 +#define MXC_CCM_CCGR1_CG5_OFFSET 10 +#define MXC_CCM_CCGR1_CG4_OFFSET 8 +#define MXC_CCM_CCGR1_CG3_OFFSET 6 +#define MXC_CCM_CCGR1_CG2_OFFSET 4 +#define MXC_CCM_CCGR1_CG1_OFFSET 2 +#define MXC_CCM_CCGR1_CG0_OFFSET 0 + +#define MXC_CCM_CCGR2_CG15_OFFSET 30 +#define MXC_CCM_CCGR2_CG14_OFFSET 28 +#define MXC_CCM_CCGR2_CG13_OFFSET 26 +#define MXC_CCM_CCGR2_CG12_OFFSET 24 +#define MXC_CCM_CCGR2_CG11_OFFSET 22 +#define MXC_CCM_CCGR2_CG10_OFFSET 20 +#define MXC_CCM_CCGR2_CG9_OFFSET 18 +#define MXC_CCM_CCGR2_CG8_OFFSET 16 +#define MXC_CCM_CCGR2_CG7_OFFSET 14 +#define MXC_CCM_CCGR2_CG6_OFFSET 12 +#define MXC_CCM_CCGR2_CG5_OFFSET 10 +#define MXC_CCM_CCGR2_CG4_OFFSET 8 +#define MXC_CCM_CCGR2_CG3_OFFSET 6 +#define MXC_CCM_CCGR2_CG2_OFFSET 4 +#define MXC_CCM_CCGR2_CG1_OFFSET 2 +#define MXC_CCM_CCGR2_CG0_OFFSET 0 + +#define MXC_CCM_CCGR3_CG15_OFFSET 30 +#define MXC_CCM_CCGR3_CG14_OFFSET 28 +#define MXC_CCM_CCGR3_CG13_OFFSET 26 +#define MXC_CCM_CCGR3_CG12_OFFSET 24 +#define MXC_CCM_CCGR3_CG11_OFFSET 22 +#define MXC_CCM_CCGR3_CG10_OFFSET 20 +#define MXC_CCM_CCGR3_CG9_OFFSET 18 +#define MXC_CCM_CCGR3_CG8_OFFSET 16 +#define MXC_CCM_CCGR3_CG7_OFFSET 14 +#define MXC_CCM_CCGR3_CG6_OFFSET 12 +#define MXC_CCM_CCGR3_CG5_OFFSET 10 +#define MXC_CCM_CCGR3_CG4_OFFSET 8 +#define MXC_CCM_CCGR3_CG3_OFFSET 6 +#define MXC_CCM_CCGR3_CG2_OFFSET 4 +#define MXC_CCM_CCGR3_CG1_OFFSET 2 +#define MXC_CCM_CCGR3_CG0_OFFSET 0 + +#define MXC_CCM_CCGR4_CG15_OFFSET 30 +#define MXC_CCM_CCGR4_CG14_OFFSET 28 +#define MXC_CCM_CCGR4_CG13_OFFSET 26 +#define MXC_CCM_CCGR4_CG12_OFFSET 24 +#define MXC_CCM_CCGR4_CG11_OFFSET 22 +#define MXC_CCM_CCGR4_CG10_OFFSET 20 +#define MXC_CCM_CCGR4_CG9_OFFSET 18 +#define MXC_CCM_CCGR4_CG8_OFFSET 16 +#define MXC_CCM_CCGR4_CG7_OFFSET 14 +#define MXC_CCM_CCGR4_CG6_OFFSET 12 +#define MXC_CCM_CCGR4_CG5_OFFSET 10 +#define MXC_CCM_CCGR4_CG4_OFFSET 8 +#define MXC_CCM_CCGR4_CG3_OFFSET 6 +#define MXC_CCM_CCGR4_CG2_OFFSET 4 +#define MXC_CCM_CCGR4_CG1_OFFSET 2 +#define MXC_CCM_CCGR4_CG0_OFFSET 0 + +#define MXC_CCM_CCGR5_CG15_OFFSET 30 +#define MXC_CCM_CCGR5_CG14_OFFSET 28 +#define MXC_CCM_CCGR5_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGR5_CG13_OFFSET 26 +#define MXC_CCM_CCGR5_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGR5_CG12_OFFSET 24 +#define MXC_CCM_CCGR5_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGR5_CG11_OFFSET 22 +#define MXC_CCM_CCGR5_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGR5_CG10_OFFSET 20 +#define MXC_CCM_CCGR5_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGR5_CG9_OFFSET 18 +#define MXC_CCM_CCGR5_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGR5_CG8_OFFSET 16 +#define MXC_CCM_CCGR5_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGR5_CG7_OFFSET 14 +#define MXC_CCM_CCGR5_CG7_MASK (0x3 << 14) +#define MXC_CCM_CCGR5_CG6_OFFSET 12 +#define MXC_CCM_CCGR5_CG5_OFFSET 10 +#define MXC_CCM_CCGR5_CG4_OFFSET 8 +#define MXC_CCM_CCGR5_CG3_OFFSET 6 +#define MXC_CCM_CCGR5_CG2_OFFSET 4 +#define MXC_CCM_CCGR5_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGR5_CG1_OFFSET 2 +#define MXC_CCM_CCGR5_CG0_OFFSET 0 + +#define MXC_CCM_CCGR6_CG4_OFFSET 8 +#define MXC_CCM_CCGR6_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGR6_CG3_OFFSET 6 +#define MXC_CCM_CCGR6_CG2_OFFSET 4 +#define MXC_CCM_CCGR6_CG1_OFFSET 2 +#define MXC_CCM_CCGR6_CG0_OFFSET 0 + +#define MXC_CORTEXA8_BASE ARM_BASE_ADDR +#define MXC_GPC_BASE GPC_BASE_ADDR +#define MXC_DPTC_LP_BASE (GPC_BASE_ADDR + 0x80) +#define MXC_DPTC_GP_BASE (GPC_BASE_ADDR + 0x100) +#define MXC_DVFS_CORE_BASE (GPC_BASE_ADDR + 0x180) +#define MXC_DPTC_PER_BASE (GPC_BASE_ADDR + 0x1C0) +#define MXC_PGC_IPU_BASE (GPC_BASE_ADDR + 0x220) +#define MXC_PGC_VPU_BASE (GPC_BASE_ADDR + 0x240) +#define MXC_PGC_GPU_BASE (GPC_BASE_ADDR + 0x260) +#define MXC_SRPG_NEON_BASE (GPC_BASE_ADDR + 0x280) +#define MXC_SRPG_ARM_BASE (GPC_BASE_ADDR + 0x2A0) +#define MXC_SRPG_EMPGC0_BASE (GPC_BASE_ADDR + 0x2C0) +#define MXC_SRPG_EMPGC1_BASE (GPC_BASE_ADDR + 0x2D0) +#define MXC_SRPG_MEGAMIX_BASE (GPC_BASE_ADDR + 0x2E0) +#define MXC_SRPG_EMI_BASE (GPC_BASE_ADDR + 0x300) + +/* CORTEXA8 platform */ +#define MXC_CORTEXA8_PLAT_PVID (MXC_CORTEXA8_BASE + 0x0) +#define MXC_CORTEXA8_PLAT_GPC (MXC_CORTEXA8_BASE + 0x4) +#define MXC_CORTEXA8_PLAT_PIC (MXC_CORTEXA8_BASE + 0x8) +#define MXC_CORTEXA8_PLAT_LPC (MXC_CORTEXA8_BASE + 0xC) +#define MXC_CORTEXA8_PLAT_NEON_LPC (MXC_CORTEXA8_BASE + 0x10) +#define MXC_CORTEXA8_PLAT_ICGC (MXC_CORTEXA8_BASE + 0x14) +#define MXC_CORTEXA8_PLAT_AMC (MXC_CORTEXA8_BASE + 0x18) +#define MXC_CORTEXA8_PLAT_NMC (MXC_CORTEXA8_BASE + 0x20) +#define MXC_CORTEXA8_PLAT_NMS (MXC_CORTEXA8_BASE + 0x24) + +/* DVFS CORE */ +#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00) +#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04) +#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08) +#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C) +#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10) +#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14) +#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18) +#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C) +#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20) +#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24) +#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28) +#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C) +#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30) +#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34) +#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38) +#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C) +#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40) + +/* GPC */ +#define MXC_GPC_CNTR (MXC_GPC_BASE + 0x0) +#define MXC_GPC_PGR (MXC_GPC_BASE + 0x4) +#define MXC_GPC_VCR (MXC_GPC_BASE + 0x8) +#define MXC_GPC_ALL_PU (MXC_GPC_BASE + 0xC) +#define MXC_GPC_NEON (MXC_GPC_BASE + 0x10) +#define MXC_GPC_PGR_ARMPG_OFFSET 8 +#define MXC_GPC_PGR_ARMPG_MASK (3 << 8) + +/* PGC */ +#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0) +#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC) +#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0) +#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC) +#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0) +#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC) + +#define MXC_PGCR_PCR 1 +#define MXC_SRPGCR_PCR 1 +#define MXC_EMPGCR_PCR 1 +#define MXC_PGSR_PSR 1 + + +#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) +#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) + +/* SRPG */ +#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0) +#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4) +#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8) + +#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0) +#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4) +#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8) + +#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0) +#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4) +#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8) + +#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0) +#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4) +#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8) + +#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0) +#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4) +#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8) + +#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0) +#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4) +#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8) + +#ifndef __ASSEMBLE__ +extern unsigned int __get_mcu_main_clk(void); +extern void mxc_show_clocks(void); +#endif +#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/cpu/arm_cortexa8/mx51/interrupts.c b/cpu/arm_cortexa8/mx51/interrupts.c new file mode 100644 index 0000000..c0d70ac --- /dev/null +++ b/cpu/arm_cortexa8/mx51/interrupts.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx51.h> + +/* nothing really to do with interrupts. */ +int interrupt_init(void) +{ + return 0; +} diff --git a/cpu/arm_cortexa8/mx51/iomux.c b/cpu/arm_cortexa8/mx51/iomux.c new file mode 100644 index 0000000..80082aa --- /dev/null +++ b/cpu/arm_cortexa8/mx51/iomux.c @@ -0,0 +1,199 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @defgroup GPIO_MX51 Board GPIO and Muxing Setup + * @ingroup MSL_MX51 + */ +/*! + * @file mach-mx51/iomux.c + * + * @brief I/O Muxing control functions + * + * @ingroup GPIO_MX51 + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> +#include <asm/arch/iomux.h> + +/*! + * IOMUX register (base) addresses + */ +enum iomux_reg_addr { + IOMUXGPR0 = IOMUXC_BASE_ADDR, + IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004, + IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, + IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, + IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR, +}; + +#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) + +static inline u32 _get_mux_reg(iomux_pin_name_t pin) +{ + u32 mux_reg = PIN_TO_IOMUX_MUX(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (mux_reg >= 0x2FC) + mux_reg += 8; + else if (mux_reg >= 0x130) + mux_reg += 0xC; + } + mux_reg += IOMUXSW_MUX_CTL; + return mux_reg; +} + +static inline u32 _get_pad_reg(iomux_pin_name_t pin) +{ + u32 pad_reg = PIN_TO_IOMUX_PAD(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (pad_reg == 0x4D0 - PAD_I_START) + pad_reg += 0x4C; + else if (pad_reg == 0x860 - PAD_I_START) + pad_reg += 0x9C; + else if (pad_reg >= 0x804 - PAD_I_START) + pad_reg += 0xB0; + else if (pad_reg >= 0x7FC - PAD_I_START) + pad_reg += 0xB4; + else if (pad_reg >= 0x4E4 - PAD_I_START) + pad_reg += 0xCC; + else + pad_reg += 8; + } + pad_reg += IOMUXSW_PAD_CTL; + return pad_reg; +} + +static inline u32 _get_mux_end(void) +{ + if (is_soc_rev(CHIP_REV_2_0) < 0) + return IOMUXC_BASE_ADDR + (0x3F8 - 4); + else + return IOMUXC_BASE_ADDR + (0x3F0 - 4); +} + +/*! + * This function is used to configure a pin through the IOMUX module. + * FIXED ME: for backward compatible. Will be static function! + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param cfg an output function as defined in \b #iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +static int iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + u32 mux_reg = _get_mux_reg(pin); + + if ((mux_reg > _get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL)) + return -1; + if (cfg == IOMUX_CONFIG_GPIO) + writel(PIN_TO_ALT_GPIO(pin), mux_reg); + else + writel(cfg, mux_reg); + + return 0; +} + +/*! + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by \b iomux_pin_name_t + * @param cfg an input function as defined in \b #iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + int ret = iomux_config_mux(pin, cfg); + return ret; +} + +/*! + * Release ownership for an IO pin + * + * @param pin a name defined by \b iomux_pin_name_t + * @param cfg an input function as defined in \b #iomux_pin_cfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ +} + +/*! + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param config the ORed value of elements defined in \b #iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) +{ + u32 pad_reg = _get_pad_reg(pin); + writel(config, pad_reg); +} + +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) +{ + u32 pad_reg = _get_pad_reg(pin); + return readl(pad_reg); +} +/*! + * This function configures input path. + * + * @param input index of input select register as defined in \b + * #iomux_input_select_t + * @param config the binary value of elements defined in \b + * #iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config) +{ + u32 reg = IOMUXSW_INPUT_CTL + (input << 2); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + if (input == MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT) + input -= 4; + else if (input == + MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT) + input -= 3; + else if (input >= MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT) + input -= 2; + else if (input >= + MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT) + input -= 5; + else if (input >= + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT) + input -= 3; + else if (input >= MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT) + input -= 2; + else if (input >= MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT) + input -= 1; + + reg += INPUT_CTL_START_TO1; + } else { + reg += INPUT_CTL_START; + } + + writel(config, reg); +} diff --git a/cpu/arm_cortexa8/mx51/soc.c b/cpu/arm_cortexa8/mx51/soc.c new file mode 100644 index 0000000..cd8ce9d --- /dev/null +++ b/cpu/arm_cortexa8/mx51/soc.c @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx51.h> +#include <asm/errno.h> +#include <asm/io.h> +#include "crm_regs.h" + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("CPU: Freescale i.MX51 family %d.%dV at %d MHz\n", + (get_board_rev() & 0xFF) >> 4, + (get_board_rev() & 0xF), + __get_mcu_main_clk() / 1000000); + mxc_show_clocks(); + return 0; +} +#endif + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +#if defined(CONFIG_MXC_FEC) +extern int mxc_fec_initialize(bd_t *bis); +#endif + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_MXC_FEC) + rc = mxc_fec_initialize(bis); +#endif + + return rc; +} + +void reset_cpu(ulong addr) +{ + __raw_writew(4, WDOG1_BASE_ADDR); +} diff --git a/cpu/arm_cortexa8/mx51/timer.c b/cpu/arm_cortexa8/mx51/timer.c new file mode 100644 index 0000000..5201768 --- /dev/null +++ b/cpu/arm_cortexa8/mx51/timer.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> + +/* General purpose timers registers */ +#define GPTCR GPT1_BASE_ADDR /* Control register */ +#define GPTPR (GPT1_BASE_ADDR + 0x4) /* Prescaler register */ +#define GPTSR (GPT1_BASE_ADDR + 0x8) /* Status register */ +#define GPTCNT (GPT1_BASE_ADDR + 0x24) /* Counter register */ + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ + +int timer_init(void) +{ + int i; + + /* setup GP Timer 1 */ + __raw_writel(GPTCR_SWR, GPTCR); + for (i = 0; i < 100; i++) + __raw_writel(0, GPTCR); /* We have no udelay by now */ + + __raw_writel(0, GPTPR); /* 32Khz */ + + /* Freerun Mode, PERCLK1 input */ + i = __raw_readl(GPTCR); + __raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, GPTCR); + return 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +void reset_timer_masked(void) +{ + __raw_writel(0, GPTCR); + /* Freerun Mode, PERCLK1 input */ + __raw_writel(GPTCR_CLKSOURCE_32 | GPTCR_TEN, GPTCR); +} + +ulong get_timer_masked(void) +{ + ulong val = __raw_readl(GPTCNT); + return val; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; + tmo /= 1000; /* finish normalize. */ + } else {/* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000 * 1000); + } + + tmp = get_timer(0); /* get current timestamp */ + /* if setting this forward will roll time stamp */ + if ((tmo + tmp + 1) < tmp) + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo) /* loop till event */ + /*NOP*/; +} diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index acc5b7d..c8acfb8 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -20,6 +20,8 @@ #include <common.h> #ifdef CONFIG_MX31 #include <asm/arch/mx31.h> +#elif defined(CONFIG_MX51) +#include <asm/arch/mx51.h> #else #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> @@ -37,6 +39,8 @@ #define UART_PHYS 0x43fb0000 #elif defined(CONFIG_SYS_MX31_UART5) #define UART_PHYS 0x43fb4000 +#elif defined(CONFIG_SYS_MX51_UART1) +#define UART_PHYS UART1_BASE_ADDR #elif defined(CONFIG_SYS_MX27_UART1) #define UART_PHYS 0x1000a000 #elif defined(CONFIG_SYS_MX27_UART2) @@ -168,6 +172,8 @@ void serial_setbrg (void) { #ifdef CONFIG_MX31 u32 clk = mx31_get_ipg_clk(); +#elif defined(CONFIG_MX51) + u32 clk = mxc_get_clock(MXC_UART_CLK); #else u32 clk = imx_get_perclk1(); #endif diff --git a/include/asm-arm/arch-mx51/iomux.h b/include/asm-arm/arch-mx51/iomux.h new file mode 100644 index 0000000..fa02984 --- /dev/null +++ b/include/asm-arm/arch-mx51/iomux.h @@ -0,0 +1,240 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_MX51_IOMUX_H__ +#define __MACH_MX51_IOMUX_H__ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx51.h> +#include <asm/arch/mx51_pins.h> + +/*! + * @file iomux.h + * + * @brief I/O Muxing control definitions and functions + * + * @ingroup GPIO_MX51 + */ + +typedef unsigned int iomux_pin_name_t; + +/*! + * various IOMUX output functions + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, /*!< used as alternate function 0 */ + IOMUX_CONFIG_ALT1, /*!< used as alternate function 1 */ + IOMUX_CONFIG_ALT2, /*!< used as alternate function 2 */ + IOMUX_CONFIG_ALT3, /*!< used as alternate function 3 */ + IOMUX_CONFIG_ALT4, /*!< used as alternate function 4 */ + IOMUX_CONFIG_ALT5, /*!< used as alternate function 5 */ + IOMUX_CONFIG_ALT6, /*!< used as alternate function 6 */ + IOMUX_CONFIG_ALT7, /*!< used as alternate function 7 */ + IOMUX_CONFIG_GPIO, /*!< added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /*!< used as LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/*! + * various IOMUX pad functions + */ +typedef enum iomux_pad_config { + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0, + PAD_CTL_DRV_LOW = 0x0 << 1, + PAD_CTL_DRV_MEDIUM = 0x1 << 1, + PAD_CTL_DRV_HIGH = 0x2 << 1, + PAD_CTL_DRV_MAX = 0x3 << 1, + PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3, + PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3, + PAD_CTL_100K_PD = 0x0 << 4, + PAD_CTL_47K_PU = 0x1 << 4, + PAD_CTL_100K_PU = 0x2 << 4, + PAD_CTL_22K_PU = 0x3 << 4, + PAD_CTL_PUE_KEEPER = 0x0 << 6, + PAD_CTL_PUE_PULL = 0x1 << 6, + PAD_CTL_PKE_NONE = 0x0 << 7, + PAD_CTL_PKE_ENABLE = 0x1 << 7, + PAD_CTL_HYS_NONE = 0x0 << 8, + PAD_CTL_HYS_ENABLE = 0x1 << 8, + PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9, + PAD_CTL_DDR_INPUT_DDR = 0x1 << 9, + PAD_CTL_DRV_VOT_LOW = 0x0 << 13, + PAD_CTL_DRV_VOT_HIGH = 0x1 << 13, +} iomux_pad_config_t; + +/*! + * various IOMUX input select register index + */ +typedef enum iomux_input_select { + MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, + MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, + MUX_IN_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, + MUX_IN_CCM_IPP_DI_CLK_SELECT_INPUT, + /* TO2 */ + MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MUX_IN_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, + /* TO2 */ + MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, + MUX_IN_EMI_IPP_IND_RDY_INT_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, + MUX_IN_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, + MUX_IN_FEC_FEC_COL_SELECT_INPUT, + MUX_IN_FEC_FEC_CRS_SELECT_INPUT, + MUX_IN_FEC_FEC_MDI_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_0_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_1_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_2_SELECT_INPUT, + MUX_IN_FEC_FEC_RDATA_3_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_DV_SELECT_INPUT, + MUX_IN_FEC_FEC_RX_ER_SELECT_INPUT, + MUX_IN_FEC_FEC_TX_CLK_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, + MUX_IN_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, + /* TO2 */ + MUX_IN_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, + /* TO2 */ + MUX_IN_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, + /* TO2 */ + MUX_IN_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, + MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, + MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT, + MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT, + + MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + + MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + + MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_4_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, + MUX_IN_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, + MUX_INPUT_NUM_MUX, +} iomux_input_select_t; + +/*! + * various IOMUX input functions + */ +typedef enum iomux_input_config { + INPUT_CTL_PATH0 = 0x0, + INPUT_CTL_PATH1, + INPUT_CTL_PATH2, + INPUT_CTL_PATH3, + INPUT_CTL_PATH4, + INPUT_CTL_PATH5, + INPUT_CTL_PATH6, + INPUT_CTL_PATH7, +} iomux_input_config_t; + +/*! + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * Release ownership for an IO pin + * + * @param pin a name defined by \b iomux_pin_name_t + * @param config config as defined in \b #iomux_pin_ocfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); + +/*! + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @param config the ORed value of elements defined in + * \b #iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); + +/*! + * This function gets the current pad value for a IOMUX pin. + * + * @param pin a pin number as defined in \b #iomux_pin_name_t + * @return current pad value + */ +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); + +/*! + * This function configures input path. + * + * @param input index of input select register as defined in + * \b #iomux_input_select_t + * @param config the binary value of elements defined in + * \b #iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config); + +#endif /* __MACH_MX51_IOMUX_H__ */ diff --git a/include/asm-arm/arch-mx51/mx51.h b/include/asm-arm/arch-mx51/mx51.h new file mode 100644 index 0000000..cf51945 --- /dev/null +++ b/include/asm-arm/arch-mx51/mx51.h @@ -0,0 +1,416 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_MX51_H__ +#define __ASM_ARCH_MXC_MX51_H__ + +/* + * IRAM + */ +#define IRAM_BASE_ADDR 0x1FFE8000 /* internal ram */ +/* + * Graphics Memory of GPU + */ +#define GPU_BASE_ADDR 0x20000000 +#define GPU_CTRL_BASE_ADDR 0x30000000 +#define IPU_CTRL_BASE_ADDR 0x40000000 +/* + * Debug + */ +#define DEBUG_BASE_ADDR 0x60000000 +#define ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000) +#define ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000) +#define TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000) +#define CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000) +#define CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000) +#define CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000) +#define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) +#define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x70000000 + +#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) +#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MMC_SDHC4_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPDIF_BASE_ADDR (SPBA0_BASE_ADDR + 0x00028000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00030000) +#define SLIM_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00034000) +#define HSI2C_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00038000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x73F00000 + +#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define GPIO1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define GPIO2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) +#define GPIO3_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) +#define GPIO4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define WDOG1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define WDOG2_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define GPT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define SRTC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define EPIT1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) +#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) +#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000) +#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000) +#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) +#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x83F00000 + +#define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) +#define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000) +#define AHBMAX_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define IIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define CSU_BASE_ADDR (AIPS2_BASE_ADDR + 0x0009C000) +#define ARM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A0000) +#define OWIRE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A8000) +#define CSPI2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B4000) +#define ROMCP_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B8000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000BC000) +#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define I2C2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define I2C1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) +#define SSI1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define M4IF_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define ESDCTL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D9000) +#define WEIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DA000) +#define NFC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DB000) +#define EMI_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DBF00) +#define MIPI_HSC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) +#define ATA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) +#define SIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E4000) +#define SSI3BASE_ADDR (AIPS2_BASE_ADDR + 0x000E8000) +#define FEC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) +#define TVE_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F0000) +#define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000) +#define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000) + +#define TZIC_BASE_ADDR 0x8FFFC000 + +/* + * Memory regions and CS + */ +#define CSD0_BASE_ADDR 0x90000000 +#define CSD1_BASE_ADDR 0xA0000000 +#define CS0_BASE_ADDR 0xB0000000 +#define CS1_BASE_ADDR 0xB8000000 +#define CS2_BASE_ADDR 0xC0000000 +#define CS3_BASE_ADDR 0xC8000000 +#define CS4_BASE_ADDR 0xCC000000 +#define CS5_BASE_ADDR 0xCE000000 + +/* + * NFC + */ +#define NFC_BASE_ADDR_AXI 0xCFFF0000 /* NAND flash AXI */ + +/*! + * defines for SPBA modules + */ +#define SPBA_SDHC1 0x04 +#define SPBA_SDHC2 0x08 +#define SPBA_UART3 0x0C +#define SPBA_CSPI1 0x10 +#define SPBA_SSI2 0x14 +#define SPBA_SDHC3 0x20 +#define SPBA_SDHC4 0x24 +#define SPBA_SPDIF 0x28 +#define SPBA_ATA 0x30 +#define SPBA_SLIM 0x34 +#define SPBA_HSI2C 0x38 +#define SPBA_CTRL 0x3C + +/* + * Interrupt numbers + */ +#define MXC_INT_BASE 0 +#define MXC_INT_RESV0 0 +#define MXC_INT_MMC_SDHC1 1 +#define MXC_INT_MMC_SDHC2 2 +#define MXC_INT_MMC_SDHC3 3 +#define MXC_INT_MMC_SDHC4 4 +#define MXC_INT_RESV5 5 +#define MXC_INT_SDMA 6 +#define MXC_INT_IOMUX 7 +#define MXC_INT_NFC 8 +#define MXC_INT_VPU 9 +#define MXC_INT_IPU_ERR 10 +#define MXC_INT_IPU_SYN 11 +#define MXC_INT_GPU 12 +#define MXC_INT_RESV13 13 +#define MXC_INT_USB_H1 14 +#define MXC_INT_EMI 15 +#define MXC_INT_USB_H2 16 +#define MXC_INT_USB_H3 17 +#define MXC_INT_USB_OTG 18 +#define MXC_INT_SAHARA_H0 19 +#define MXC_INT_SAHARA_H1 20 +#define MXC_INT_SCC_SMN 21 +#define MXC_INT_SCC_STZ 22 +#define MXC_INT_SCC_SCM 23 +#define MXC_INT_SRTC_NTZ 24 +#define MXC_INT_SRTC_TZ 25 +#define MXC_INT_RTIC 26 +#define MXC_INT_CSU 27 +#define MXC_INT_SLIM_B 28 +#define MXC_INT_SSI1 29 +#define MXC_INT_SSI2 30 +#define MXC_INT_UART1 31 +#define MXC_INT_UART2 32 +#define MXC_INT_UART3 33 +#define MXC_INT_RESV34 34 +#define MXC_INT_RESV35 35 +#define MXC_INT_CSPI1 36 +#define MXC_INT_CSPI2 37 +#define MXC_INT_CSPI 38 +#define MXC_INT_GPT 39 +#define MXC_INT_EPIT1 40 +#define MXC_INT_EPIT2 41 +#define MXC_INT_GPIO1_INT7 42 +#define MXC_INT_GPIO1_INT6 43 +#define MXC_INT_GPIO1_INT5 44 +#define MXC_INT_GPIO1_INT4 45 +#define MXC_INT_GPIO1_INT3 46 +#define MXC_INT_GPIO1_INT2 47 +#define MXC_INT_GPIO1_INT1 48 +#define MXC_INT_GPIO1_INT0 49 +#define MXC_INT_GPIO1_LOW 50 +#define MXC_INT_GPIO1_HIGH 51 +#define MXC_INT_GPIO2_LOW 52 +#define MXC_INT_GPIO2_HIGH 53 +#define MXC_INT_GPIO3_LOW 54 +#define MXC_INT_GPIO3_HIGH 55 +#define MXC_INT_GPIO4_LOW 56 +#define MXC_INT_GPIO4_HIGH 57 +#define MXC_INT_WDOG1 58 +#define MXC_INT_WDOG2 59 +#define MXC_INT_KPP 60 +#define MXC_INT_PWM1 61 +#define MXC_INT_I2C1 62 +#define MXC_INT_I2C2 63 +#define MXC_INT_HS_I2C 64 +#define MXC_INT_RESV65 65 +#define MXC_INT_RESV66 66 +#define MXC_INT_SIM_IPB 67 +#define MXC_INT_SIM_DAT 68 +#define MXC_INT_IIM 69 +#define MXC_INT_ATA 70 +#define MXC_INT_CCM1 71 +#define MXC_INT_CCM2 72 +#define MXC_INT_GPC1 73 +#define MXC_INT_GPC2 74 +#define MXC_INT_SRC 75 +#define MXC_INT_NM 76 +#define MXC_INT_PMU 77 +#define MXC_INT_CTI_IRQ 78 +#define MXC_INT_CTI1_TG0 79 +#define MXC_INT_CTI1_TG1 80 +#define MXC_INT_MCG_ERR 81 +#define MXC_INT_MCG_TMR 82 +#define MXC_INT_MCG_FUNC 83 +#define MXC_INT_RESV84 84 +#define MXC_INT_RESV85 85 +#define MXC_INT_RESV86 86 +#define MXC_INT_FEC 87 +#define MXC_INT_OWIRE 88 +#define MXC_INT_CTI1_TG2 89 +#define MXC_INT_SJC 90 +#define MXC_INT_SPDIF 91 +#define MXC_INT_TVE 92 +#define MXC_INT_FIRI 93 +#define MXC_INT_PWM2 94 +#define MXC_INT_SLIM_EXP 95 +#define MXC_INT_SSI3 96 +#define MXC_INT_RESV97 97 +#define MXC_INT_CTI1_TG3 98 +#define MXC_INT_SMC_RX 99 +#define MXC_INT_VPU_IDLE 100 +#define MXC_INT_RESV101 101 +#define MXC_INT_GPU_IDLE 102 + +#define MXC_MAX_INT_LINES 128 + +#define MXC_GPIO_INT_BASE (MXC_MAX_INT_LINES) + +/*! + * Number of GPIO port as defined in the IC Spec + */ +#define GPIO_PORT_NUM 4 +/*! + * Number of GPIO pins per port + */ +#define GPIO_NUM_PIN 32 + +#define MXC_GPIO_SPLIT_IRQ_2 + +#define IIM_SREV 0x24 +#define ROM_SI_REV 0x48 + +#define NFC_BUF_SIZE 0x1000 + +/* WEIM registers */ +#define CSGCR1 0x00 +#define CSGCR2 0x04 +#define CSRCR1 0x08 +#define CSRCR2 0x0C +#define CSWCR1 0x10 + +/* M4IF */ +#define M4IF_FBPM0 0x40 +#define M4IF_FIDBP 0x48 + +/* ESDCTL */ +#define ESDCTL_ESDCTL0 0x00 +#define ESDCTL_ESDCFG0 0x04 +#define ESDCTL_ESDCTL1 0x08 +#define ESDCTL_ESDCFG1 0x0C +#define ESDCTL_ESDMISC 0x10 +#define ESDCTL_ESDSCR 0x14 +#define ESDCTL_ESDCDLY1 0x20 +#define ESDCTL_ESDCDLY2 0x24 +#define ESDCTL_ESDCDLY3 0x28 +#define ESDCTL_ESDCDLY4 0x2C +#define ESDCTL_ESDCDLY5 0x30 +#define ESDCTL_ESDCDLYGD 0x34 + +/* CCM */ +#define CLKCTL_CCR 0x00 +#define CLKCTL_CCDR 0x04 +#define CLKCTL_CSR 0x08 +#define CLKCTL_CCSR 0x0C +#define CLKCTL_CACRR 0x10 +#define CLKCTL_CBCDR 0x14 +#define CLKCTL_CBCMR 0x18 +#define CLKCTL_CSCMR1 0x1C +#define CLKCTL_CSCMR2 0x20 +#define CLKCTL_CSCDR1 0x24 +#define CLKCTL_CS1CDR 0x28 +#define CLKCTL_CS2CDR 0x2C +#define CLKCTL_CDCDR 0x30 +#define CLKCTL_CHSCCDR 0x34 +#define CLKCTL_CSCDR2 0x38 +#define CLKCTL_CSCDR3 0x3C +#define CLKCTL_CSCDR4 0x40 +#define CLKCTL_CWDR 0x44 +#define CLKCTL_CDHIPR 0x48 +#define CLKCTL_CDCR 0x4C +#define CLKCTL_CTOR 0x50 +#define CLKCTL_CLPCR 0x54 +#define CLKCTL_CISR 0x58 +#define CLKCTL_CIMR 0x5C +#define CLKCTL_CCOSR 0x60 +#define CLKCTL_CGPR 0x64 +#define CLKCTL_CCGR0 0x68 +#define CLKCTL_CCGR1 0x6C +#define CLKCTL_CCGR2 0x70 +#define CLKCTL_CCGR3 0x74 +#define CLKCTL_CCGR4 0x78 +#define CLKCTL_CCGR5 0x7C +#define CLKCTL_CCGR6 0x80 +#define CLKCTL_CMEOR 0x84 + +/* DPLL */ +#define PLL_DP_CTL 0x00 +#define PLL_DP_CONFIG 0x04 +#define PLL_DP_OP 0x08 +#define PLL_DP_MFD 0x0C +#define PLL_DP_MFN 0x10 +#define PLL_DP_MFNMINUS 0x14 +#define PLL_DP_MFNPLUS 0x18 +#define PLL_DP_HFS_OP 0x1C +#define PLL_DP_HFS_MFD 0x20 +#define PLL_DP_HFS_MFN 0x24 +#define PLL_DP_TOGC 0x28 +#define PLL_DP_DESTAT 0x2C + +/* Assuming 24MHz input clock with doubler ON */ +/* MFI PDF */ +#define DP_OP_850 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_850 (48 - 1) +#define DP_MFN_850 41 + +#define DP_OP_800 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_800 (3 - 1) +#define DP_MFN_800 1 + +#define DP_OP_700 ((7 << 4) + ((1 - 1) << 0)) +#define DP_MFD_700 (24 - 1) +#define DP_MFN_700 7 + +#define DP_OP_665 ((6 << 4) + ((1 - 1) << 0)) +#define DP_MFD_665 (96 - 1) +#define DP_MFN_665 89 + +#define DP_OP_532 ((5 << 4) + ((1 - 1) << 0)) +#define DP_MFD_532 (24 - 1) +#define DP_MFN_532 13 + +#define DP_OP_400 ((8 << 4) + ((2 - 1) << 0)) +#define DP_MFD_400 (3 - 1) +#define DP_MFN_400 1 + +#define DP_OP_216 ((6 << 4) + ((3 - 1) << 0)) +#define DP_MFD_216 (4 - 1) +#define DP_MFN_216 3 + +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_5 0x120 + +#define BOARD_REV_1_0 0x0 +#define BOARD_REV_2_0 0x1 + +#ifndef __ASSEMBLER__ + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_IPG_PERCLK, + MXC_UART_CLK, + MXC_CSPI_CLK, + MXC_FEC_CLK, +}; + +extern unsigned int mxc_get_clock(enum mxc_clock clk); +extern unsigned int get_board_rev(void); +extern int is_soc_rev(int rev); + +#endif /* __ASSEMBLER__*/ + +#endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/include/asm-arm/arch-mx51/mx51_pins.h b/include/asm-arm/arch-mx51/mx51_pins.h new file mode 100644 index 0000000..63fdd8c --- /dev/null +++ b/include/asm-arm/arch-mx51/mx51_pins.h @@ -0,0 +1,370 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MXC_MX51_PINS_H__ +#define __ASM_ARCH_MXC_MX51_PINS_H__ + +/*! + * @file arch-mxc/mx51_pins.h + * + * @brief MX51 I/O Pin List + * + * @ingroup GPIO_MX51 + */ + +#ifndef __ASSEMBLY__ + +/*! + * @name IOMUX/PAD Bit field definitions + */ + +/*! @{ */ + +/*! + * In order to identify pins more effectively, each mux-controlled pin's + * enumerated value is constructed in the following way: + * + * ------------------------------------------------------------------- + * 31-29 | 28 - 24 | 23 - 21 | 20 - 10| 9 - 0 + * ------------------------------------------------------------------- + * IO_P | IO_I | GPIO_I | PAD_I | MUX_I + * ------------------------------------------------------------------- + * + * Bit 0 to 9 contains MUX_I used to identify the register + * offset (0-based. base is IOMUX_module_base) defined in the Section + * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The + * similar field definitions are used for the pad control register. + * For example, the MX51_PIN_ETM_D0 is defined in the enumeration: + * ( (0x28 - MUX_I_START) << MUX_I)|( (0x250 - PAD_I_START) << PAD_I) + * It means the mux control register is at register offset 0x28. The pad control + * register offset is: 0x250 and also occupy the least significant bits + * within the register. + */ + +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * MUX control register offset + */ +#define MUX_I 0 +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * PAD control register offset + */ +#define PAD_I 10 +/*! + * Starting bit position within each entry of \b iomux_pins to represent which + * mux mode is for GPIO (0-based) + */ +#define GPIO_I 21 + +#define MUX_IO_P 29 +#define MUX_IO_I 24 +#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \ + GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\ + ((1 << (MUX_IO_P - MUX_IO_I)) - 1))) +#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin)) +#define GPIO_TO_PORT(n) (n / GPIO_NUM_PIN) +#define GPIO_TO_INDEX(n) (n % GPIO_NUM_PIN) + +#define NON_GPIO_PORT 0x7 +#define PIN_TO_MUX_MASK ((1 << (PAD_I - MUX_I)) - 1) +#define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) +#define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) + +#define NON_MUX_I PIN_TO_MUX_MASK +#define MUX_I_START 0x001C +#define PAD_I_START 0x3F0 +#define INPUT_CTL_START 0x8C4 +#define INPUT_CTL_START_TO1 0x928 +#define MUX_I_END (PAD_I_START - 4) + +#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ + (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ + ((mi) << MUX_I) | \ + ((pi - PAD_I_START) << PAD_I) | \ + ((ga) << GPIO_I)) + +#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \ + _MXC_BUILD_PIN(gp, gi, ga, mi, pi) + +#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ + _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi) + +#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) +#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) +#define PIN_TO_ALT_GPIO(pin) ((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK) +#define PIN_TO_IOMUX_INDEX(pin) (PIN_TO_IOMUX_MUX(pin) >> 2) + +/*! @} End IOMUX/PAD Bit field definitions */ + +/*! + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ +enum iomux_pins { + MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8), + MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8), + MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8), + MX51_PIN_EIM_DA3 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x7A8), + MX51_PIN_EIM_DA4 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x7AC), + MX51_PIN_EIM_DA5 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x7AC), + MX51_PIN_EIM_DA6 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x7AC), + MX51_PIN_EIM_DA7 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x7AC), + MX51_PIN_EIM_DA8 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x7B0), + MX51_PIN_EIM_DA9 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x7B0), + MX51_PIN_EIM_DA10 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x7B0), + MX51_PIN_EIM_DA11 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x7B0), + MX51_PIN_EIM_DA12 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x7BC), + MX51_PIN_EIM_DA13 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x7BC), + MX51_PIN_EIM_DA14 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x7BC), + MX51_PIN_EIM_DA15 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x7BC), + MX51_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x5C, 0x3F0), + MX51_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x60, 0x3F4), + MX51_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x64, 0x3F8), + MX51_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x68, 0x3FC), + MX51_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x6C, 0x400), + MX51_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x70, 0x404), + MX51_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x74, 0x408), + MX51_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x78, 0x40C), + MX51_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x7C, 0x410), + MX51_PIN_EIM_D25 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x414), + MX51_PIN_EIM_D26 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x418), + MX51_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x88, 0x41C), + MX51_PIN_EIM_D28 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x420), + MX51_PIN_EIM_D29 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x424), + MX51_PIN_EIM_D30 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x428), + MX51_PIN_EIM_D31 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x42C), + MX51_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x9C, 0x430), + MX51_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0xA0, 0x434), + MX51_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0xA4, 0x438), + MX51_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0xA8, 0x43C), + MX51_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0xAC, 0x440), + MX51_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0xB0, 0x444), + MX51_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0xB4, 0x448), + MX51_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0xB8, 0x44C), + MX51_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0xBC, 0x450), + MX51_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0xC0, 0x454), + MX51_PIN_EIM_A26 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0xC4, 0x458), + MX51_PIN_EIM_A27 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0xC8, 0x45C), + MX51_PIN_EIM_EB0 = _MXC_BUILD_NON_GPIO_PIN(0xCC, 0x460), + MX51_PIN_EIM_EB1 = _MXC_BUILD_NON_GPIO_PIN(0xD0, 0x464), + MX51_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0xD4, 0x468), + MX51_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0xD8, 0x46C), + MX51_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0xDC, 0x470), + MX51_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0xE0, 0x474), + MX51_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0xE4, 0x478), + MX51_PIN_EIM_CS2 = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0xE8, 0x47C), + MX51_PIN_EIM_CS3 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0xEC, 0x480), + MX51_PIN_EIM_CS4 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0xF0, 0x484), + MX51_PIN_EIM_CS5 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0xF4, 0x488), + MX51_PIN_EIM_DTACK = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0xF8, 0x48C), + MX51_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0xFC, 0x494), + MX51_PIN_EIM_CRE = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x100, 0x4A0), + MX51_PIN_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0x104, 0x4D0), + MX51_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(2, 3, 3, 0x108, 0x4E4), + MX51_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(2, 4, 3, 0x10C, 0x4E8), + MX51_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(2, 5, 3, 0x110, 0x4EC), + MX51_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(2, 6, 3, 0x114, 0x4F0), + MX51_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(2, 7, 3, 0x118, 0x4F4), + MX51_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(2, 8, 3, 0x11C, 0x4F8), + MX51_PIN_NANDF_RB1 = _MXC_BUILD_GPIO_PIN(2, 9, 3, 0x120, 0x4FC), + MX51_PIN_NANDF_RB2 = _MXC_BUILD_GPIO_PIN(2, 10, 3, 0x124, 0x500), + MX51_PIN_NANDF_RB3 = _MXC_BUILD_GPIO_PIN(2, 11, 3, 0x128, 0x504), + MX51_PIN_GPIO_NAND = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x12C, 0x514), + MX51_PIN_NANDF_RB4 = MX51_PIN_GPIO_NAND, + MX51_PIN_NANDF_RB5 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x130, 0x5D8), + MX51_PIN_NANDF_RB6 = _MXC_BUILD_GPIO_PIN(2, 14, 3, 0x134, 0x5DC), + MX51_PIN_NANDF_RB7 = _MXC_BUILD_GPIO_PIN(2, 15, 3, 0x138, 0x5E0), + MX51_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(2, 16, 3, 0x130, 0x518), + MX51_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(2, 17, 3, 0x134, 0x51C), + MX51_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(2, 18, 3, 0x138, 0x520), + MX51_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(2, 19, 3, 0x13C, 0x524), + MX51_PIN_NANDF_CS4 = _MXC_BUILD_GPIO_PIN(2, 20, 3, 0x140, 0x528), + MX51_PIN_NANDF_CS5 = _MXC_BUILD_GPIO_PIN(2, 21, 3, 0x144, 0x52C), + MX51_PIN_NANDF_CS6 = _MXC_BUILD_GPIO_PIN(2, 22, 3, 0x148, 0x530), + MX51_PIN_NANDF_CS7 = _MXC_BUILD_GPIO_PIN(2, 23, 3, 0x14C, 0x534), + MX51_PIN_NANDF_RDY_INT = _MXC_BUILD_GPIO_PIN(2, 24, 3, 0x150, 0x538), + MX51_PIN_NANDF_D15 = _MXC_BUILD_GPIO_PIN(2, 25, 3, 0x154, 0x53C), + MX51_PIN_NANDF_D14 = _MXC_BUILD_GPIO_PIN(2, 26, 3, 0x158, 0x540), + MX51_PIN_NANDF_D13 = _MXC_BUILD_GPIO_PIN(2, 27, 3, 0x15C, 0x544), + MX51_PIN_NANDF_D12 = _MXC_BUILD_GPIO_PIN(2, 28, 3, 0x160, 0x548), + MX51_PIN_NANDF_D11 = _MXC_BUILD_GPIO_PIN(2, 29, 3, 0x164, 0x54C), + MX51_PIN_NANDF_D10 = _MXC_BUILD_GPIO_PIN(2, 30, 3, 0x168, 0x550), + MX51_PIN_NANDF_D9 = _MXC_BUILD_GPIO_PIN(2, 31, 3, 0x16C, 0x554), + MX51_PIN_NANDF_D8 = _MXC_BUILD_GPIO_PIN(3, 0, 3, 0x170, 0x558), + MX51_PIN_NANDF_D7 = _MXC_BUILD_GPIO_PIN(3, 1, 3, 0x174, 0x55C), + MX51_PIN_NANDF_D6 = _MXC_BUILD_GPIO_PIN(3, 2, 3, 0x178, 0x560), + MX51_PIN_NANDF_D5 = _MXC_BUILD_GPIO_PIN(3, 3, 3, 0x17C, 0x564), + MX51_PIN_NANDF_D4 = _MXC_BUILD_GPIO_PIN(3, 4, 3, 0x180, 0x568), + MX51_PIN_NANDF_D3 = _MXC_BUILD_GPIO_PIN(3, 5, 3, 0x184, 0x56C), + MX51_PIN_NANDF_D2 = _MXC_BUILD_GPIO_PIN(3, 6, 3, 0x188, 0x570), + MX51_PIN_NANDF_D1 = _MXC_BUILD_GPIO_PIN(3, 7, 3, 0x18C, 0x574), + MX51_PIN_NANDF_D0 = _MXC_BUILD_GPIO_PIN(3, 8, 3, 0x190, 0x578), + MX51_PIN_CSI1_D8 = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x194, 0x57C), + MX51_PIN_CSI1_D9 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x198, 0x580), + MX51_PIN_CSI1_D10 = _MXC_BUILD_NON_GPIO_PIN(0x19C, 0x584), + MX51_PIN_CSI1_D11 = _MXC_BUILD_NON_GPIO_PIN(0x1A0, 0x588), + MX51_PIN_CSI1_D12 = _MXC_BUILD_NON_GPIO_PIN(0x1A4, 0x58C), + MX51_PIN_CSI1_D13 = _MXC_BUILD_NON_GPIO_PIN(0x1A8, 0x590), + MX51_PIN_CSI1_D14 = _MXC_BUILD_NON_GPIO_PIN(0x1AC, 0x594), + MX51_PIN_CSI1_D15 = _MXC_BUILD_NON_GPIO_PIN(0x1B0, 0x598), + MX51_PIN_CSI1_D16 = _MXC_BUILD_NON_GPIO_PIN(0x1B4, 0x59C), + MX51_PIN_CSI1_D17 = _MXC_BUILD_NON_GPIO_PIN(0x1B8, 0x5A0), + MX51_PIN_CSI1_D18 = _MXC_BUILD_NON_GPIO_PIN(0x1BC, 0x5A4), + MX51_PIN_CSI1_D19 = _MXC_BUILD_NON_GPIO_PIN(0x1C0, 0x5A8), + MX51_PIN_CSI1_VSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C4, 0x5AC), + MX51_PIN_CSI1_HSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C8, 0x5B0), + MX51_PIN_CSI1_PIXCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B4), + MX51_PIN_CSI1_MCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B8), + MX51_PIN_CSI1_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x860), + MX51_PIN_CSI2_D12 = _MXC_BUILD_GPIO_PIN(3, 9, 3, 0x1CC, 0x5BC), + MX51_PIN_CSI2_D13 = _MXC_BUILD_GPIO_PIN(3, 10, 3, 0x1D0, 0x5C0), + MX51_PIN_CSI2_D14 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1D4, 0x5C4), + MX51_PIN_CSI2_D15 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1D8, 0x5C8), + MX51_PIN_CSI2_D16 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1DC, 0x5CC), + MX51_PIN_CSI2_D17 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E0, 0x5D0), + MX51_PIN_CSI2_D18 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1E4, 0x5D4), + MX51_PIN_CSI2_D19 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E8, 0x5D8), + MX51_PIN_CSI2_VSYNC = _MXC_BUILD_GPIO_PIN(3, 13, 3, 0x1EC, 0x5DC), + MX51_PIN_CSI2_HSYNC = _MXC_BUILD_GPIO_PIN(3, 14, 3, 0x1F0, 0x5E0), + MX51_PIN_CSI2_PIXCLK = _MXC_BUILD_GPIO_PIN(3, 15, 3, 0x1F4, 0x5E4), + MX51_PIN_CSI2_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x81C), + MX51_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 3, 0x1F8, 0x5E8), + MX51_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(3, 17, 3, 0x1FC, 0x5EC), + MX51_PIN_AUD3_BB_TXD = _MXC_BUILD_GPIO_PIN(3, 18, 3, 0x200, 0x5F0), + MX51_PIN_AUD3_BB_RXD = _MXC_BUILD_GPIO_PIN(3, 19, 3, 0x204, 0x5F4), + MX51_PIN_AUD3_BB_CK = _MXC_BUILD_GPIO_PIN(3, 20, 3, 0x208, 0x5F8), + MX51_PIN_AUD3_BB_FS = _MXC_BUILD_GPIO_PIN(3, 21, 3, 0x20C, 0x5FC), + MX51_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(3, 22, 3, 0x210, 0x600), + MX51_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(3, 23, 3, 0x214, 0x604), + MX51_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(3, 24, 3, 0x218, 0x608), + MX51_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(3, 25, 3, 0x21C, 0x60C), + MX51_PIN_CSPI1_RDY = _MXC_BUILD_GPIO_PIN(3, 26, 3, 0x220, 0x610), + MX51_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(3, 27, 3, 0x224, 0x614), + MX51_PIN_UART1_RXD = _MXC_BUILD_GPIO_PIN(3, 28, 3, 0x228, 0x618), + MX51_PIN_UART1_TXD = _MXC_BUILD_GPIO_PIN(3, 29, 3, 0x22C, 0x61C), + MX51_PIN_UART1_RTS = _MXC_BUILD_GPIO_PIN(3, 30, 3, 0x230, 0x620), + MX51_PIN_UART1_CTS = _MXC_BUILD_GPIO_PIN(3, 31, 3, 0x234, 0x624), + MX51_PIN_UART2_RXD = _MXC_BUILD_GPIO_PIN(0, 20, 3, 0x238, 0x628), + MX51_PIN_UART2_TXD = _MXC_BUILD_GPIO_PIN(0, 21, 3, 0x23C, 0x62C), + MX51_PIN_UART3_RXD = _MXC_BUILD_GPIO_PIN(0, 22, 3, 0x240, 0x630), + MX51_PIN_UART3_TXD = _MXC_BUILD_GPIO_PIN(0, 23, 3, 0x244, 0x634), + MX51_PIN_OWIRE_LINE = _MXC_BUILD_GPIO_PIN(0, 24, 3, 0x248, 0x638), + MX51_PIN_KEY_ROW0 = _MXC_BUILD_NON_GPIO_PIN(0x24C, 0x63C), + MX51_PIN_KEY_ROW1 = _MXC_BUILD_NON_GPIO_PIN(0x250, 0x640), + MX51_PIN_KEY_ROW2 = _MXC_BUILD_NON_GPIO_PIN(0x254, 0x644), + MX51_PIN_KEY_ROW3 = _MXC_BUILD_NON_GPIO_PIN(0x258, 0x648), + MX51_PIN_KEY_COL0 = _MXC_BUILD_NON_GPIO_PIN(0x25C, 0x64C), + MX51_PIN_KEY_COL1 = _MXC_BUILD_NON_GPIO_PIN(0x260, 0x650), + MX51_PIN_KEY_COL2 = _MXC_BUILD_NON_GPIO_PIN(0x264, 0x654), + MX51_PIN_KEY_COL3 = _MXC_BUILD_NON_GPIO_PIN(0x268, 0x658), + MX51_PIN_KEY_COL4 = _MXC_BUILD_NON_GPIO_PIN(0x26C, 0x65C), + MX51_PIN_KEY_COL5 = _MXC_BUILD_NON_GPIO_PIN(0x270, 0x660), + MX51_PIN_USBH1_CLK = _MXC_BUILD_GPIO_PIN(0, 25, 2, 0x278, 0x678), + MX51_PIN_USBH1_DIR = _MXC_BUILD_GPIO_PIN(0, 26, 2, 0x27C, 0x67C), + MX51_PIN_USBH1_STP = _MXC_BUILD_GPIO_PIN(0, 27, 2, 0x280, 0x680), + MX51_PIN_USBH1_NXT = _MXC_BUILD_GPIO_PIN(0, 28, 2, 0x284, 0x684), + MX51_PIN_USBH1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 11, 2, 0x288, 0x688), + MX51_PIN_USBH1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 12, 2, 0x28C, 0x68C), + MX51_PIN_USBH1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 2, 0x290, 0x690), + MX51_PIN_USBH1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 14, 2, 0x294, 0x694), + MX51_PIN_USBH1_DATA4 = _MXC_BUILD_GPIO_PIN(0, 15, 2, 0x298, 0x698), + MX51_PIN_USBH1_DATA5 = _MXC_BUILD_GPIO_PIN(0, 16, 2, 0x29C, 0x69C), + MX51_PIN_USBH1_DATA6 = _MXC_BUILD_GPIO_PIN(0, 17, 2, 0x2A0, 0x6A0), + MX51_PIN_USBH1_DATA7 = _MXC_BUILD_GPIO_PIN(0, 18, 2, 0x2A4, 0x6A4), + MX51_PIN_DI1_PIN11 = _MXC_BUILD_GPIO_PIN(2, 0, 4, 0x2A8, 0x6A8), + MX51_PIN_DI1_PIN12 = _MXC_BUILD_GPIO_PIN(2, 1, 4, 0x2AC, 0x6AC), + MX51_PIN_DI1_PIN13 = _MXC_BUILD_GPIO_PIN(2, 2, 4, 0x2B0, 0x6B0), + MX51_PIN_DI1_D0_CS = _MXC_BUILD_GPIO_PIN(2, 3, 4, 0x2B4, 0x6B4), + MX51_PIN_DI1_D1_CS = _MXC_BUILD_GPIO_PIN(2, 4, 4, 0x2B8, 0x6B8), + MX51_PIN_DISPB2_SER_DIN = _MXC_BUILD_GPIO_PIN(2, 5, 4, 0x2BC, 0x6BC), + MX51_PIN_DISPB2_SER_DIO = _MXC_BUILD_GPIO_PIN(2, 6, 4, 0x2C0, 0x6C0), + MX51_PIN_DISPB2_SER_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 4, 0x2C4, 0x6C4), + MX51_PIN_DISPB2_SER_RS = _MXC_BUILD_GPIO_PIN(2, 8, 4, 0x2C8, 0x6C8), + MX51_PIN_DISP1_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x2CC, 0x6CC), + MX51_PIN_DISP1_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x2D0, 0x6D0), + MX51_PIN_DISP1_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x2D4, 0x6D4), + MX51_PIN_DISP1_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x2D8, 0x6D8), + MX51_PIN_DISP1_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x2DC, 0x6DC), + MX51_PIN_DISP1_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x2E0, 0x6E0), + MX51_PIN_DISP1_DAT6 = _MXC_BUILD_NON_GPIO_PIN(0x2E4, 0x6E4), + MX51_PIN_DISP1_DAT7 = _MXC_BUILD_NON_GPIO_PIN(0x2E8, 0x6E8), + MX51_PIN_DISP1_DAT8 = _MXC_BUILD_NON_GPIO_PIN(0x2EC, 0x6EC), + MX51_PIN_DISP1_DAT9 = _MXC_BUILD_NON_GPIO_PIN(0x2F0, 0x6F0), + MX51_PIN_DISP1_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x2F4, 0x6F4), + MX51_PIN_DISP1_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x2F8, 0x6F8), + MX51_PIN_DISP1_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x2FC, 0x6FC), + MX51_PIN_DISP1_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x300, 0x700), + MX51_PIN_DISP1_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x304, 0x704), + MX51_PIN_DISP1_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x308, 0x708), + MX51_PIN_DISP1_DAT16 = _MXC_BUILD_NON_GPIO_PIN(0x30C, 0x70C), + MX51_PIN_DISP1_DAT17 = _MXC_BUILD_NON_GPIO_PIN(0x310, 0x710), + MX51_PIN_DISP1_DAT18 = _MXC_BUILD_NON_GPIO_PIN(0x314, 0x714), + MX51_PIN_DISP1_DAT19 = _MXC_BUILD_NON_GPIO_PIN(0x318, 0x718), + MX51_PIN_DISP1_DAT20 = _MXC_BUILD_NON_GPIO_PIN(0x31C, 0x71C), + MX51_PIN_DISP1_DAT21 = _MXC_BUILD_NON_GPIO_PIN(0x320, 0x720), + MX51_PIN_DISP1_DAT22 = _MXC_BUILD_NON_GPIO_PIN(0x324, 0x724), + MX51_PIN_DISP1_DAT23 = _MXC_BUILD_NON_GPIO_PIN(0x328, 0x728), + MX51_PIN_DI1_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x32C, 0x72C), + MX51_PIN_DI1_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x330, 0x734), + MX51_PIN_DI_GP1 = _MXC_BUILD_NON_GPIO_PIN(0x334, 0x73C), + MX51_PIN_DI_GP2 = _MXC_BUILD_NON_GPIO_PIN(0x338, 0x740), + MX51_PIN_DI_GP3 = _MXC_BUILD_NON_GPIO_PIN(0x33C, 0x744), + MX51_PIN_DI2_PIN4 = _MXC_BUILD_NON_GPIO_PIN(0x340, 0x748), + MX51_PIN_DI2_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x344, 0x74C), + MX51_PIN_DI2_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x348, 0x750), + MX51_PIN_DI2_DISP_CLK = _MXC_BUILD_NON_GPIO_PIN(0x34C, 0x754), + MX51_PIN_DI_GP4 = _MXC_BUILD_NON_GPIO_PIN(0x350, 0x758), + MX51_PIN_DISP2_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x354, 0x75C), + MX51_PIN_DISP2_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x358, 0x760), + MX51_PIN_DISP2_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x35C, 0x764), + MX51_PIN_DISP2_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x360, 0x768), + MX51_PIN_DISP2_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x364, 0x76C), + MX51_PIN_DISP2_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x368, 0x770), + MX51_PIN_DISP2_DAT6 = _MXC_BUILD_GPIO_PIN(0, 19, 5, 0x36C, 0x774), + MX51_PIN_DISP2_DAT7 = _MXC_BUILD_GPIO_PIN(0, 29, 5, 0x370, 0x778), + MX51_PIN_DISP2_DAT8 = _MXC_BUILD_GPIO_PIN(0, 30, 5, 0x374, 0x77C), + MX51_PIN_DISP2_DAT9 = _MXC_BUILD_GPIO_PIN(0, 31, 5, 0x378, 0x780), + MX51_PIN_DISP2_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x37C, 0x784), + MX51_PIN_DISP2_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x380, 0x788), + MX51_PIN_DISP2_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x384, 0x78C), + MX51_PIN_DISP2_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x388, 0x790), + MX51_PIN_DISP2_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x38C, 0x794), + MX51_PIN_DISP2_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x390, 0x798), + MX51_PIN_SD1_CMD = _MXC_BUILD_NON_GPIO_PIN(0x394, 0x79C), + MX51_PIN_SD1_CLK = _MXC_BUILD_NON_GPIO_PIN(0x398, 0x7A0), + MX51_PIN_SD1_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x39C, 0x7A4), + MX51_PIN_SD1_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3A0, 0x7A8), + MX51_PIN_SD1_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3A4, 0x7AC), + MX51_PIN_SD1_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3A8, 0x7B0), + MX51_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x3AC, 0x7B4), + MX51_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x3B0, 0x7B8), + MX51_PIN_SD2_CMD = _MXC_BUILD_NON_GPIO_PIN(0x3B4, 0x7BC), + MX51_PIN_SD2_CLK = _MXC_BUILD_NON_GPIO_PIN(0x3B8, 0x7C0), + MX51_PIN_SD2_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x3BC, 0x7C4), + MX51_PIN_SD2_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3C0, 0x7C8), + MX51_PIN_SD2_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3C4, 0x7CC), + MX51_PIN_SD2_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3C8, 0x7D0), + MX51_PIN_GPIO1_2 = _MXC_BUILD_GPIO_PIN(0, 2, 0, 0x3CC, 0x7D4), + MX51_PIN_GPIO1_3 = _MXC_BUILD_GPIO_PIN(0, 3, 0, 0x3D0, 0x7D8), + MX51_PIN_PMIC_INT_REQ = _MXC_BUILD_NON_GPIO_PIN(0x3D4, 0x7FC), + MX51_PIN_GPIO1_4 = _MXC_BUILD_GPIO_PIN(0, 4, 0, 0x3D8, 0x804), + MX51_PIN_GPIO1_5 = _MXC_BUILD_GPIO_PIN(0, 5, 0, 0x3DC, 0x808), + MX51_PIN_GPIO1_6 = _MXC_BUILD_GPIO_PIN(0, 6, 0, 0x3E0, 0x80C), + MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810), + MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814), + MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818), +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_MX51_PINS_H__ */ diff --git a/include/configs/mx51_babbage.h b/include/configs/mx51_babbage.h new file mode 100644 index 0000000..a24b39b --- /dev/null +++ b/include/configs/mx51_babbage.h @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg(a)denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51-3Stack Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx51.h> + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 1 /* This is armv7 Cortex-A8 CPU core */ +#define CONFIG_L2_OFF + +#define CONFIG_MXC 1 +#define CONFIG_MX51 1 +#define CONFIG_FLASH_HEADER 1 +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_FLASH_HEADER_BARKER 0xB1 + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_MX51_HCLK_FREQ 24000000 +#define CONFIG_MX51_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_DOS_PARTITION 1 +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART 1 +#define CONFIG_SYS_MX51_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot_addr=0xa0000000\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + +/* + * The MX51 babbage board seems to have a hardware "peculiarity" confirmed under + * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the ethernet + * controller inverted. The controller is capable of detecting and correcting + * this, but it needs 4 network packets for that. Which means, at startup, you + * will not receive answers to the first 4 packest, unless there have been some + * broadcasts on the network, or your board is on a hub. Reducing the ARP + * timeout from default 5 seconds to 200ms we speed up the initial TFTP + * transfer, should the user wish one, significantly. + */ +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "BBG U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ CONFIG_MX51_CLK32/* use 32kHz clock as source */ + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#if defined(CONFIG_CMD_SF) + #define CONFIG_FSL_ENV_IN_SF +#elif defined(CONFIG_CMD_MMC) + #define CONFIG_FSL_ENV_IN_MMC +#endif + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_IS_EMBEDDED 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif + +#endif /* __CONFIG_H */ -- 1.6.0.4

6 8

[U-Boot] [PATCH 0/3] enable CONFIG_NET_MULTI for LAN91C96
by Nishanth Menon 14 Dec '09

14 Dec '09

Based on the discussion[1] here is the patchset Patchset is based on [2], and tested on SDP3430. Other platforms would be prefered to be build/tested/fixed as required Nishanth Menon (3): NET: LAN91C96 CONFIG_NET_MULTIify TI OMAP3: SDP3430 FIX NET_MULTI Warning LAN91C96: Enable NET_MULTI LAN driver board/apollon/apollon.c | 12 +- board/ti/sdp3430/sdp.c | 12 +- drivers/net/Makefile | 2 +- drivers/net/lan91c96.c | 452 ++++++++++++++++----------------------- drivers/net/lan91c96.h | 110 +++++----- include/configs/B2.h | 2 +- include/configs/apollon.h | 3 +- include/configs/assabet.h | 3 +- include/configs/gcplus.h | 3 +- include/configs/lubbock.h | 3 +- include/configs/omap1510inn.h | 3 +- include/configs/omap1610h2.h | 3 +- include/configs/omap1610inn.h | 3 +- include/configs/omap2420h4.h | 3 +- include/configs/omap3_sdp3430.h | 3 +- include/configs/omap5912osk.h | 3 +- include/configs/omap730p2.h | 3 +- include/configs/pleb2.h | 6 +- include/netdev.h | 1 + 19 files changed, 277 insertions(+), 353 deletions(-) Regards, Nishanth Menon Ref: [1] http://www.nabble.com/-U-Boot--NET%3A-SDP3430%3A-trouble-with-shifting-from… [2] http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot/u-boot-ti.git

6 18

[U-Boot] [PATCH v2 0/6] Clean up top-level directory structure
by Peter Tyser 08 Dec '09

08 Dec '09

Changes since v1: - squashed lib_<ARCH> move into 1 commit - moved examples to examples/standalone - moved api_examples to examples/api This series moves api_examples to api/examples and moves all lib* directories into a common lib/ directory. It also moves the <ARCH>_config.mk files into their corresponding lib directory. Seeing 12 lib_<ARCH> directories and 12 <ARCH>_config.mk files in U-Boot's top level always annoyed me, and I finally had some time to reorganize:) I compile tested on all PPC boards and verified an out of tree build. This series needs the api_examples Make cleanup applied: http://www.mail-archive.com/u-boot@lists.denx.de/msg16032.html Peter Tyser (6): Move architecture specific config.mk files into subdirs Move lib_<ARCH> directories to lib/<ARCH> Move lib_generic to lib/generic Move libfdt to lib/libfdt Move examples/ to examples/standalone Move api_examples to examples/api Makefile | 36 +++++++++++--------- README | 24 ++++++------ board/BuS/EB+MCF-EV123/u-boot.lds | 8 ++-- board/LEOX/elpt860/u-boot.lds | 18 +++++----- board/LEOX/elpt860/u-boot.lds.debug | 4 +- board/RPXClassic/u-boot.lds | 8 ++-- board/RPXClassic/u-boot.lds.debug | 4 +- board/RPXlite/u-boot.lds | 8 ++-- board/RPXlite/u-boot.lds.debug | 4 +- board/RPXlite_dw/u-boot.lds | 8 ++-- board/RPXlite_dw/u-boot.lds.debug | 4 +- board/RRvision/u-boot.lds | 12 +++--- board/actux1/u-boot.lds | 6 ++-- board/actux2/u-boot.lds | 6 ++-- board/actux3/u-boot.lds | 6 ++-- board/amirix/ap1000/u-boot.lds | 6 ++-- board/atum8548/u-boot.lds | 6 ++-- board/bf518f-ezbrd/config.mk | 2 +- board/bf526-ezbrd/config.mk | 2 +- board/bf527-ezkit/config.mk | 2 +- board/bf533-ezkit/config.mk | 2 +- board/bf533-stamp/config.mk | 2 +- board/bf537-stamp/config.mk | 2 +- board/bf538f-ezkit/config.mk | 2 +- board/bf548-ezkit/config.mk | 2 +- board/bf561-ezkit/config.mk | 2 +- board/c2mon/u-boot.lds | 8 ++-- board/c2mon/u-boot.lds.debug | 4 +- board/cm-bf527/config.mk | 2 +- board/cm-bf533/config.mk | 2 +- board/cm-bf537e/config.mk | 2 +- board/cm-bf548/config.mk | 2 +- board/cm-bf561/config.mk | 2 +- board/cobra5272/u-boot.lds | 4 +- board/cogent/u-boot.lds.debug | 4 +- board/cray/L1/u-boot.lds | 6 ++-- board/cray/L1/u-boot.lds.debug | 6 ++-- board/csb272/u-boot.lds | 8 ++-- board/csb472/u-boot.lds | 8 ++-- board/dave/PPChameleonEVB/u-boot.lds | 6 ++-- board/eltec/mhpc/u-boot.lds.debug | 4 +- board/emk/top860/u-boot.lds.debug | 6 ++-- board/eric/u-boot.lds | 6 ++-- board/esd/ocrtc/u-boot.lds | 6 ++-- board/esd/tasreg/u-boot.lds | 4 +- board/esteem192e/u-boot.lds | 8 ++-- board/etx094/u-boot.lds | 4 +- board/etx094/u-boot.lds.debug | 8 ++-- board/exbitgen/u-boot.lds | 6 ++-- board/fads/u-boot.lds.debug | 6 ++-- board/flagadm/u-boot.lds.debug | 4 +- board/freescale/m52277evb/u-boot.spa | 4 +- board/freescale/m5235evb/u-boot.16 | 6 ++-- board/freescale/m5235evb/u-boot.32 | 4 +- board/freescale/m5249evb/u-boot.lds | 4 +- board/freescale/m5253demo/u-boot.lds | 4 +- board/freescale/m5253evbe/u-boot.lds | 4 +- board/freescale/m5271evb/u-boot.lds | 4 +- board/freescale/m5272c3/u-boot.lds | 4 +- board/freescale/m5275evb/u-boot.lds | 4 +- board/freescale/m5282evb/u-boot.lds | 6 ++-- board/freescale/m53017evb/u-boot.lds | 4 +- board/freescale/m5329evb/u-boot.lds | 6 ++-- board/freescale/m5373evb/u-boot.lds | 6 ++-- board/freescale/m54451evb/u-boot.spa | 6 ++-- board/freescale/m54451evb/u-boot.stm | 4 +- board/freescale/m54455evb/u-boot.atm | 6 ++-- board/freescale/m54455evb/u-boot.int | 6 ++-- board/freescale/m547xevb/u-boot.lds | 4 +- board/freescale/m548xevb/u-boot.lds | 4 +- board/freescale/mpc7448hpc2/tsi108_init.c | 2 +- board/freescale/mpc8610hpcd/u-boot.lds | 6 ++-- board/freescale/mpc8641hpcn/u-boot.lds | 6 ++-- board/freescale/mx31ads/u-boot.lds | 2 +- board/genietv/u-boot.lds | 8 ++-- board/genietv/u-boot.lds.debug | 8 ++-- board/hermes/u-boot.lds | 8 ++-- board/hermes/u-boot.lds.debug | 6 ++-- board/hymod/u-boot.lds | 8 ++-- board/hymod/u-boot.lds.debug | 4 +- board/icu862/u-boot.lds | 8 ++-- board/icu862/u-boot.lds.debug | 6 ++-- board/idmr/u-boot.lds | 4 +- board/ip860/u-boot.lds | 6 ++-- board/ip860/u-boot.lds.debug | 6 ++-- board/ivm/u-boot.lds.debug | 6 ++-- board/jse/jse.c | 6 ++-- board/jse/sdram.c | 2 +- board/keymile/km8xx/u-boot.lds | 12 +++--- board/kup/kup4k/u-boot.lds | 8 ++-- board/kup/kup4k/u-boot.lds.debug | 4 +- board/kup/kup4x/u-boot.lds | 8 ++-- board/kup/kup4x/u-boot.lds.debug | 4 +- board/lantec/u-boot.lds | 8 ++-- board/lantec/u-boot.lds.debug | 4 +- board/lwmon/u-boot.lds.debug | 6 ++-- board/mbx8xx/u-boot.lds.debug | 6 ++-- board/ml2/u-boot.lds | 6 ++-- board/ml2/u-boot.lds.debug | 6 ++-- board/mousse/u-boot.lds | 10 +++--- board/mousse/u-boot.lds.rom | 8 ++-- board/mpc8540eval/u-boot.lds | 6 ++-- board/mpl/mip405/u-boot.lds | 6 ++-- board/mpl/pip405/u-boot.lds | 6 ++-- board/mpl/pip405/u-boot.lds.debug | 6 ++-- board/netphone/u-boot.lds | 12 +++--- board/netphone/u-boot.lds.debug | 4 +- board/netstal/hcu4/hcu4.c | 2 +- board/netstal/hcu5/README.txt | 6 ++-- board/netstal/hcu5/hcu5.c | 2 +- board/netstal/mcu25/mcu25.c | 2 +- board/netstar/Makefile | 4 +- board/netta/u-boot.lds | 12 +++--- board/netta/u-boot.lds.debug | 4 +- board/netta2/u-boot.lds | 12 +++--- board/netta2/u-boot.lds.debug | 4 +- board/netvia/u-boot.lds | 12 +++--- board/netvia/u-boot.lds.debug | 4 +- board/nx823/u-boot.lds.debug | 4 +- board/pcs440ep/u-boot.lds | 2 +- board/pm854/u-boot.lds | 6 ++-- board/pm856/u-boot.lds | 6 ++-- board/purple/u-boot.lds | 2 +- board/quantum/u-boot.lds | 8 ++-- board/quantum/u-boot.lds.debug | 4 +- board/rbc823/u-boot.lds | 8 ++-- board/rmu/u-boot.lds | 8 ++-- board/rmu/u-boot.lds.debug | 4 +- board/sandburst/karef/u-boot.lds | 6 ++-- board/sandburst/karef/u-boot.lds.debug | 6 ++-- board/sandburst/metrobox/u-boot.lds | 6 ++-- board/sandburst/metrobox/u-boot.lds.debug | 6 ++-- board/sbc405/u-boot.lds | 6 ++-- board/sbc8548/u-boot.lds | 6 ++-- board/sbc8560/u-boot.lds | 6 ++-- board/sbc8641d/u-boot.lds | 6 ++-- board/sc3/u-boot.lds | 6 ++-- board/siemens/CCM/u-boot.lds | 8 ++-- board/siemens/CCM/u-boot.lds.debug | 4 +- board/siemens/IAD210/u-boot.lds | 4 +- board/siemens/pcu_e/u-boot.lds.debug | 6 ++-- board/snmc/qs850/u-boot.lds | 12 +++--- board/snmc/qs860t/u-boot.lds | 12 +++--- board/socrates/u-boot.lds | 6 ++-- board/spc1920/u-boot.lds | 12 +++--- board/spd8xx/u-boot.lds.debug | 6 ++-- board/stxgp3/u-boot.lds | 6 ++-- board/stxssa/stxssa.c | 2 +- board/stxssa/u-boot.lds | 6 ++-- board/stxxtc/u-boot.lds | 12 +++--- board/stxxtc/u-boot.lds.debug | 4 +- board/svm_sc8xx/u-boot.lds | 12 +++--- board/svm_sc8xx/u-boot.lds.debug | 4 +- board/tcm-bf537/config.mk | 2 +- board/tqc/tqm85xx/u-boot.lds | 6 ++-- board/tqc/tqm8xx/u-boot.lds | 10 +++--- board/tqc/tqm8xx/u-boot.lds.debug | 4 +- board/trab/Makefile | 6 ++-- board/trab/u-boot.lds | 8 ++-- board/uc100/u-boot.lds | 12 +++--- board/uc100/u-boot.lds.debug | 4 +- board/v37/u-boot.lds | 12 +++--- board/voiceblue/Makefile | 2 +- board/w7o/u-boot.lds.debug | 6 ++-- board/westel/amx860/u-boot.lds | 8 ++-- board/westel/amx860/u-boot.lds.debug | 6 ++-- board/xes/xpedite5170/u-boot.lds | 6 ++-- board/xilinx/ml300/u-boot.lds | 6 ++-- board/xilinx/ml300/u-boot.lds.debug | 6 ++-- board/xpedite1k/u-boot.lds | 6 ++-- board/xpedite1k/u-boot.lds.debug | 6 ++-- config.mk | 2 +- cpu/mpc5xxx/u-boot-customlayout.lds | 6 ++-- doc/README.LED | 2 +- doc/README.alaska8220 | 2 +- doc/README.m52277evb | 12 +++--- doc/README.m53017evb | 12 +++--- doc/README.m5373evb | 12 +++--- doc/README.m54455evb | 12 +++--- doc/README.m5475evb | 10 +++--- doc/README.mpc5xx | 6 ++-- doc/README.nios | 2 +- doc/TODO-i386 | 2 +- {api_examples => examples/api}/.gitignore | 0 {api_examples => examples/api}/Makefile | 22 ++++++------ {api_examples => examples/api}/crt0.S | 0 {api_examples => examples/api}/demo.c | 0 {api_examples => examples/api}/glue.c | 0 {api_examples => examples/api}/glue.h | 0 {api_examples => examples/api}/libgenwrap.c | 2 +- examples/{ => standalone}/.gitignore | 0 examples/{ => standalone}/82559_eeprom.c | 0 examples/{ => standalone}/Makefile | 0 examples/{ => standalone}/README.smc91111_eeprom | 0 examples/{ => standalone}/eepro100_eeprom.c | 0 examples/{ => standalone}/hello_world.c | 0 examples/{ => standalone}/interrupt.c | 0 examples/{ => standalone}/mem_to_mem_idma2intr.c | 0 examples/{ => standalone}/mips.lds | 0 examples/{ => standalone}/nios.lds | 0 examples/{ => standalone}/nios2.lds | 0 examples/{ => standalone}/ppc_longjmp.S | 0 examples/{ => standalone}/ppc_setjmp.S | 0 examples/{ => standalone}/sched.c | 0 examples/{ => standalone}/smc91111_eeprom.c | 0 examples/{ => standalone}/smc911x_eeprom.c | 0 examples/{ => standalone}/sparc.lds | 0 examples/{ => standalone}/stubs.c | 0 examples/{ => standalone}/test_burst.c | 0 examples/{ => standalone}/test_burst.h | 0 examples/{ => standalone}/test_burst_lib.S | 0 examples/{ => standalone}/timer.c | 0 examples/{ => standalone}/x86-testapp.c | 0 include/asm-i386/interrupt.h | 2 +- include/asm-i386/u-boot-i386.h | 4 +- include/common.h | 14 ++++---- include/configs/B2.h | 2 +- include/configs/bf533-stamp.h | 2 +- include/configs/bf537-pnav.h | 2 +- include/configs/bf537-stamp.h | 2 +- include/configs/bf538f-ezkit.h | 2 +- include/configs/bf561-ezkit.h | 4 +- include/configs/cm-bf537e.h | 2 +- include/configs/ibf-dsp561.h | 4 +- include/configs/tcm-bf537.h | 2 +- include/lzma/LzmaDecode.h | 2 +- include/lzma/LzmaTools.h | 2 +- include/lzma/LzmaTypes.h | 2 +- {lib_arm => lib/arm}/Makefile | 0 {lib_arm => lib/arm}/_ashldi3.S | 0 {lib_arm => lib/arm}/_ashrdi3.S | 0 {lib_arm => lib/arm}/_divsi3.S | 0 {lib_arm => lib/arm}/_modsi3.S | 0 {lib_arm => lib/arm}/_udivsi3.S | 0 {lib_arm => lib/arm}/_umodsi3.S | 0 {lib_arm => lib/arm}/board.c | 0 {lib_arm => lib/arm}/bootm.c | 0 {lib_arm => lib/arm}/cache-cp15.c | 0 {lib_arm => lib/arm}/cache.c | 0 arm_config.mk => lib/arm/config.mk | 0 {lib_arm => lib/arm}/div0.c | 0 {lib_arm => lib/arm}/interrupts.c | 0 {lib_arm => lib/arm}/reset.c | 0 {lib_avr32 => lib/avr32}/Makefile | 0 {lib_avr32 => lib/avr32}/board.c | 0 {lib_avr32 => lib/avr32}/bootm.c | 0 avr32_config.mk => lib/avr32/config.mk | 0 {lib_avr32 => lib/avr32}/interrupts.c | 0 {lib_avr32 => lib/avr32}/memset.S | 0 {lib_blackfin => lib/blackfin}/.gitignore | 0 {lib_blackfin => lib/blackfin}/Makefile | 0 {lib_blackfin => lib/blackfin}/board.c | 0 {lib_blackfin => lib/blackfin}/boot.c | 0 {lib_blackfin => lib/blackfin}/cache.c | 0 {lib_blackfin => lib/blackfin}/clocks.c | 0 blackfin_config.mk => lib/blackfin/config.mk | 2 +- {lib_blackfin => lib/blackfin}/memcmp.S | 0 {lib_blackfin => lib/blackfin}/memcpy.S | 0 {lib_blackfin => lib/blackfin}/memmove.S | 0 {lib_blackfin => lib/blackfin}/memset.S | 0 {lib_blackfin => lib/blackfin}/muldi3.c | 0 {lib_blackfin => lib/blackfin}/post.c | 0 {lib_blackfin => lib/blackfin}/string.c | 0 {lib_blackfin => lib/blackfin}/tests.c | 0 {lib_blackfin => lib/blackfin}/u-boot.lds.S | 0 {lib_generic => lib/generic}/Makefile | 0 {lib_generic => lib/generic}/addr_map.c | 0 {lib_generic => lib/generic}/bzlib.c | 0 {lib_generic => lib/generic}/bzlib_crctable.c | 0 {lib_generic => lib/generic}/bzlib_decompress.c | 0 {lib_generic => lib/generic}/bzlib_huffman.c | 0 {lib_generic => lib/generic}/bzlib_private.h | 0 {lib_generic => lib/generic}/bzlib_randtable.c | 0 {lib_generic => lib/generic}/crc16.c | 0 {lib_generic => lib/generic}/crc32.c | 0 {lib_generic => lib/generic}/ctype.c | 0 {lib_generic => lib/generic}/display_options.c | 0 {lib_generic => lib/generic}/div64.c | 0 {lib_generic => lib/generic}/gunzip.c | 0 {lib_generic => lib/generic}/ldiv.c | 0 {lib_generic => lib/generic}/lmb.c | 0 {lib_generic => lib/generic}/lzma/LGPL.txt | 0 {lib_generic => lib/generic}/lzma/LzmaDecode.c | 0 {lib_generic => lib/generic}/lzma/LzmaDecode.h | 0 {lib_generic => lib/generic}/lzma/LzmaTools.c | 0 {lib_generic => lib/generic}/lzma/LzmaTools.h | 0 {lib_generic => lib/generic}/lzma/LzmaTypes.h | 0 {lib_generic => lib/generic}/lzma/Makefile | 0 {lib_generic => lib/generic}/lzma/README.txt | 0 {lib_generic => lib/generic}/lzma/history.txt | 0 .../generic}/lzma/import_lzmasdk.sh | 0 {lib_generic => lib/generic}/lzma/lzma.txt | 0 {lib_generic => lib/generic}/lzo/Makefile | 0 .../generic}/lzo/lzo1x_decompress.c | 0 {lib_generic => lib/generic}/lzo/lzodefs.h | 0 {lib_generic => lib/generic}/md5.c | 0 {lib_generic => lib/generic}/rbtree.c | 0 {lib_generic => lib/generic}/sha1.c | 0 {lib_generic => lib/generic}/sha256.c | 0 {lib_generic => lib/generic}/string.c | 0 {lib_generic => lib/generic}/strmhz.c | 0 {lib_generic => lib/generic}/vsprintf.c | 0 {lib_generic => lib/generic}/zlib.c | 0 {lib_i386 => lib/i386}/Makefile | 0 {lib_i386 => lib/i386}/bios.S | 0 {lib_i386 => lib/i386}/bios.h | 0 {lib_i386 => lib/i386}/bios_pci.S | 0 {lib_i386 => lib/i386}/bios_setup.c | 0 {lib_i386 => lib/i386}/board.c | 0 {lib_i386 => lib/i386}/bootm.c | 0 i386_config.mk => lib/i386/config.mk | 0 {lib_i386 => lib/i386}/interrupts.c | 0 {lib_i386 => lib/i386}/pcat_interrupts.c | 0 {lib_i386 => lib/i386}/pcat_timer.c | 0 {lib_i386 => lib/i386}/pci.c | 0 {lib_i386 => lib/i386}/pci_type1.c | 0 {lib_i386 => lib/i386}/realmode.c | 0 {lib_i386 => lib/i386}/realmode_switch.S | 0 {lib_i386 => lib/i386}/timer.c | 0 {lib_i386 => lib/i386}/video.c | 0 {lib_i386 => lib/i386}/video_bios.c | 0 {lib_i386 => lib/i386}/zimage.c | 0 {libfdt => lib/libfdt}/Makefile | 0 {libfdt => lib/libfdt}/README | 0 {libfdt => lib/libfdt}/fdt.c | 0 {libfdt => lib/libfdt}/fdt_ro.c | 0 {libfdt => lib/libfdt}/fdt_rw.c | 0 {libfdt => lib/libfdt}/fdt_strerror.c | 0 {libfdt => lib/libfdt}/fdt_sw.c | 0 {libfdt => lib/libfdt}/fdt_wip.c | 0 {libfdt => lib/libfdt}/libfdt_internal.h | 0 {lib_m68k => lib/m68k}/Makefile | 0 {lib_m68k => lib/m68k}/board.c | 0 {lib_m68k => lib/m68k}/bootm.c | 0 {lib_m68k => lib/m68k}/cache.c | 0 m68k_config.mk => lib/m68k/config.mk | 0 {lib_m68k => lib/m68k}/interrupts.c | 0 {lib_m68k => lib/m68k}/time.c | 0 {lib_m68k => lib/m68k}/traps.c | 0 {lib_microblaze => lib/microblaze}/Makefile | 0 {lib_microblaze => lib/microblaze}/board.c | 0 {lib_microblaze => lib/microblaze}/bootm.c | 0 {lib_microblaze => lib/microblaze}/cache.c | 0 microblaze_config.mk => lib/microblaze/config.mk | 0 {lib_microblaze => lib/microblaze}/time.c | 0 {lib_mips => lib/mips}/Makefile | 0 {lib_mips => lib/mips}/board.c | 0 {lib_mips => lib/mips}/bootm.c | 0 {lib_mips => lib/mips}/bootm_qemu_mips.c | 0 mips_config.mk => lib/mips/config.mk | 0 {lib_mips => lib/mips}/time.c | 0 {lib_nios => lib/nios}/Makefile | 0 {lib_nios => lib/nios}/board.c | 0 {lib_nios => lib/nios}/bootm.c | 0 {lib_nios => lib/nios}/cache.c | 0 nios_config.mk => lib/nios/config.mk | 0 {lib_nios => lib/nios}/divmod.c | 0 {lib_nios => lib/nios}/math.h | 0 {lib_nios => lib/nios}/mult.c | 0 {lib_nios => lib/nios}/time.c | 0 {lib_nios2 => lib/nios2}/Makefile | 0 {lib_nios2 => lib/nios2}/board.c | 0 {lib_nios2 => lib/nios2}/bootm.c | 0 {lib_nios2 => lib/nios2}/cache.S | 0 nios2_config.mk => lib/nios2/config.mk | 0 {lib_nios2 => lib/nios2}/divmod.c | 0 {lib_nios2 => lib/nios2}/math.h | 0 {lib_nios2 => lib/nios2}/mult.c | 0 {lib_nios2 => lib/nios2}/time.c | 0 {lib_ppc => lib/ppc}/Makefile | 0 {lib_ppc => lib/ppc}/bat_rw.c | 0 {lib_ppc => lib/ppc}/board.c | 0 {lib_ppc => lib/ppc}/bootm.c | 0 {lib_ppc => lib/ppc}/cache.c | 0 ppc_config.mk => lib/ppc/config.mk | 0 {lib_ppc => lib/ppc}/extable.c | 0 {lib_ppc => lib/ppc}/interrupts.c | 0 {lib_ppc => lib/ppc}/kgdb.c | 0 {lib_ppc => lib/ppc}/ppccache.S | 0 {lib_ppc => lib/ppc}/ppcstring.S | 0 {lib_ppc => lib/ppc}/ticks.S | 0 {lib_ppc => lib/ppc}/time.c | 0 {lib_sh => lib/sh}/Makefile | 0 {lib_sh => lib/sh}/board.c | 0 {lib_sh => lib/sh}/bootm.c | 0 sh_config.mk => lib/sh/config.mk | 0 {lib_sh => lib/sh}/time.c | 0 {lib_sh => lib/sh}/time_sh2.c | 0 {lib_sparc => lib/sparc}/Makefile | 0 {lib_sparc => lib/sparc}/board.c | 0 {lib_sparc => lib/sparc}/bootm.c | 0 {lib_sparc => lib/sparc}/cache.c | 0 sparc_config.mk => lib/sparc/config.mk | 0 {lib_sparc => lib/sparc}/interrupts.c | 0 {lib_sparc => lib/sparc}/time.c | 0 nand_spl/board/freescale/mpc8313erdb/Makefile | 6 ++-- nand_spl/board/sheldon/simpc8313/Makefile | 6 ++-- tools/Makefile | 12 +++--- tools/env/Makefile | 2 +- tools/imls/Makefile | 14 ++++---- 400 files changed, 617 insertions(+), 613 deletions(-) rename {api_examples => examples/api}/.gitignore (100%) rename {api_examples => examples/api}/Makefile (80%) rename {api_examples => examples/api}/crt0.S (100%) rename {api_examples => examples/api}/demo.c (100%) rename {api_examples => examples/api}/glue.c (100%) rename {api_examples => examples/api}/glue.h (100%) rename {api_examples => examples/api}/libgenwrap.c (96%) rename examples/{ => standalone}/.gitignore (100%) rename examples/{ => standalone}/82559_eeprom.c (100%) rename examples/{ => standalone}/Makefile (100%) rename examples/{ => standalone}/README.smc91111_eeprom (100%) rename examples/{ => standalone}/eepro100_eeprom.c (100%) rename examples/{ => standalone}/hello_world.c (100%) rename examples/{ => standalone}/interrupt.c (100%) rename examples/{ => standalone}/mem_to_mem_idma2intr.c (100%) rename examples/{ => standalone}/mips.lds (100%) rename examples/{ => standalone}/nios.lds (100%) rename examples/{ => standalone}/nios2.lds (100%) rename examples/{ => standalone}/ppc_longjmp.S (100%) rename examples/{ => standalone}/ppc_setjmp.S (100%) rename examples/{ => standalone}/sched.c (100%) rename examples/{ => standalone}/smc91111_eeprom.c (100%) rename examples/{ => standalone}/smc911x_eeprom.c (100%) rename examples/{ => standalone}/sparc.lds (100%) rename examples/{ => standalone}/stubs.c (100%) rename examples/{ => standalone}/test_burst.c (100%) rename examples/{ => standalone}/test_burst.h (100%) rename examples/{ => standalone}/test_burst_lib.S (100%) rename examples/{ => standalone}/timer.c (100%) rename examples/{ => standalone}/x86-testapp.c (100%) rename {lib_arm => lib/arm}/Makefile (100%) rename {lib_arm => lib/arm}/_ashldi3.S (100%) rename {lib_arm => lib/arm}/_ashrdi3.S (100%) rename {lib_arm => lib/arm}/_divsi3.S (100%) rename {lib_arm => lib/arm}/_modsi3.S (100%) rename {lib_arm => lib/arm}/_udivsi3.S (100%) rename {lib_arm => lib/arm}/_umodsi3.S (100%) rename {lib_arm => lib/arm}/board.c (100%) rename {lib_arm => lib/arm}/bootm.c (100%) rename {lib_arm => lib/arm}/cache-cp15.c (100%) rename {lib_arm => lib/arm}/cache.c (100%) rename arm_config.mk => lib/arm/config.mk (100%) rename {lib_arm => lib/arm}/div0.c (100%) rename {lib_arm => lib/arm}/interrupts.c (100%) rename {lib_arm => lib/arm}/reset.c (100%) rename {lib_avr32 => lib/avr32}/Makefile (100%) rename {lib_avr32 => lib/avr32}/board.c (100%) rename {lib_avr32 => lib/avr32}/bootm.c (100%) rename avr32_config.mk => lib/avr32/config.mk (100%) rename {lib_avr32 => lib/avr32}/interrupts.c (100%) rename {lib_avr32 => lib/avr32}/memset.S (100%) rename {lib_blackfin => lib/blackfin}/.gitignore (100%) rename {lib_blackfin => lib/blackfin}/Makefile (100%) rename {lib_blackfin => lib/blackfin}/board.c (100%) rename {lib_blackfin => lib/blackfin}/boot.c (100%) rename {lib_blackfin => lib/blackfin}/cache.c (100%) rename {lib_blackfin => lib/blackfin}/clocks.c (100%) rename blackfin_config.mk => lib/blackfin/config.mk (98%) rename {lib_blackfin => lib/blackfin}/memcmp.S (100%) rename {lib_blackfin => lib/blackfin}/memcpy.S (100%) rename {lib_blackfin => lib/blackfin}/memmove.S (100%) rename {lib_blackfin => lib/blackfin}/memset.S (100%) rename {lib_blackfin => lib/blackfin}/muldi3.c (100%) rename {lib_blackfin => lib/blackfin}/post.c (100%) rename {lib_blackfin => lib/blackfin}/string.c (100%) rename {lib_blackfin => lib/blackfin}/tests.c (100%) rename {lib_blackfin => lib/blackfin}/u-boot.lds.S (100%) rename {lib_generic => lib/generic}/Makefile (100%) rename {lib_generic => lib/generic}/addr_map.c (100%) rename {lib_generic => lib/generic}/bzlib.c (100%) rename {lib_generic => lib/generic}/bzlib_crctable.c (100%) rename {lib_generic => lib/generic}/bzlib_decompress.c (100%) rename {lib_generic => lib/generic}/bzlib_huffman.c (100%) rename {lib_generic => lib/generic}/bzlib_private.h (100%) rename {lib_generic => lib/generic}/bzlib_randtable.c (100%) rename {lib_generic => lib/generic}/crc16.c (100%) rename {lib_generic => lib/generic}/crc32.c (100%) rename {lib_generic => lib/generic}/ctype.c (100%) rename {lib_generic => lib/generic}/display_options.c (100%) rename {lib_generic => lib/generic}/div64.c (100%) rename {lib_generic => lib/generic}/gunzip.c (100%) rename {lib_generic => lib/generic}/ldiv.c (100%) rename {lib_generic => lib/generic}/lmb.c (100%) rename {lib_generic => lib/generic}/lzma/LGPL.txt (100%) rename {lib_generic => lib/generic}/lzma/LzmaDecode.c (100%) rename {lib_generic => lib/generic}/lzma/LzmaDecode.h (100%) rename {lib_generic => lib/generic}/lzma/LzmaTools.c (100%) rename {lib_generic => lib/generic}/lzma/LzmaTools.h (100%) rename {lib_generic => lib/generic}/lzma/LzmaTypes.h (100%) rename {lib_generic => lib/generic}/lzma/Makefile (100%) rename {lib_generic => lib/generic}/lzma/README.txt (100%) rename {lib_generic => lib/generic}/lzma/history.txt (100%) rename {lib_generic => lib/generic}/lzma/import_lzmasdk.sh (100%) rename {lib_generic => lib/generic}/lzma/lzma.txt (100%) rename {lib_generic => lib/generic}/lzo/Makefile (100%) rename {lib_generic => lib/generic}/lzo/lzo1x_decompress.c (100%) rename {lib_generic => lib/generic}/lzo/lzodefs.h (100%) rename {lib_generic => lib/generic}/md5.c (100%) rename {lib_generic => lib/generic}/rbtree.c (100%) rename {lib_generic => lib/generic}/sha1.c (100%) rename {lib_generic => lib/generic}/sha256.c (100%) rename {lib_generic => lib/generic}/string.c (100%) rename {lib_generic => lib/generic}/strmhz.c (100%) rename {lib_generic => lib/generic}/vsprintf.c (100%) rename {lib_generic => lib/generic}/zlib.c (100%) rename {lib_i386 => lib/i386}/Makefile (100%) rename {lib_i386 => lib/i386}/bios.S (100%) rename {lib_i386 => lib/i386}/bios.h (100%) rename {lib_i386 => lib/i386}/bios_pci.S (100%) rename {lib_i386 => lib/i386}/bios_setup.c (100%) rename {lib_i386 => lib/i386}/board.c (100%) rename {lib_i386 => lib/i386}/bootm.c (100%) rename i386_config.mk => lib/i386/config.mk (100%) rename {lib_i386 => lib/i386}/interrupts.c (100%) rename {lib_i386 => lib/i386}/pcat_interrupts.c (100%) rename {lib_i386 => lib/i386}/pcat_timer.c (100%) rename {lib_i386 => lib/i386}/pci.c (100%) rename {lib_i386 => lib/i386}/pci_type1.c (100%) rename {lib_i386 => lib/i386}/realmode.c (100%) rename {lib_i386 => lib/i386}/realmode_switch.S (100%) rename {lib_i386 => lib/i386}/timer.c (100%) rename {lib_i386 => lib/i386}/video.c (100%) rename {lib_i386 => lib/i386}/video_bios.c (100%) rename {lib_i386 => lib/i386}/zimage.c (100%) rename {libfdt => lib/libfdt}/Makefile (100%) rename {libfdt => lib/libfdt}/README (100%) rename {libfdt => lib/libfdt}/fdt.c (100%) rename {libfdt => lib/libfdt}/fdt_ro.c (100%) rename {libfdt => lib/libfdt}/fdt_rw.c (100%) rename {libfdt => lib/libfdt}/fdt_strerror.c (100%) rename {libfdt => lib/libfdt}/fdt_sw.c (100%) rename {libfdt => lib/libfdt}/fdt_wip.c (100%) rename {libfdt => lib/libfdt}/libfdt_internal.h (100%) rename {lib_m68k => lib/m68k}/Makefile (100%) rename {lib_m68k => lib/m68k}/board.c (100%) rename {lib_m68k => lib/m68k}/bootm.c (100%) rename {lib_m68k => lib/m68k}/cache.c (100%) rename m68k_config.mk => lib/m68k/config.mk (100%) rename {lib_m68k => lib/m68k}/interrupts.c (100%) rename {lib_m68k => lib/m68k}/time.c (100%) rename {lib_m68k => lib/m68k}/traps.c (100%) rename {lib_microblaze => lib/microblaze}/Makefile (100%) rename {lib_microblaze => lib/microblaze}/board.c (100%) rename {lib_microblaze => lib/microblaze}/bootm.c (100%) rename {lib_microblaze => lib/microblaze}/cache.c (100%) rename microblaze_config.mk => lib/microblaze/config.mk (100%) rename {lib_microblaze => lib/microblaze}/time.c (100%) rename {lib_mips => lib/mips}/Makefile (100%) rename {lib_mips => lib/mips}/board.c (100%) rename {lib_mips => lib/mips}/bootm.c (100%) rename {lib_mips => lib/mips}/bootm_qemu_mips.c (100%) rename mips_config.mk => lib/mips/config.mk (100%) rename {lib_mips => lib/mips}/time.c (100%) rename {lib_nios => lib/nios}/Makefile (100%) rename {lib_nios => lib/nios}/board.c (100%) rename {lib_nios => lib/nios}/bootm.c (100%) rename {lib_nios => lib/nios}/cache.c (100%) rename nios_config.mk => lib/nios/config.mk (100%) rename {lib_nios => lib/nios}/divmod.c (100%) rename {lib_nios => lib/nios}/math.h (100%) rename {lib_nios => lib/nios}/mult.c (100%) rename {lib_nios => lib/nios}/time.c (100%) rename {lib_nios2 => lib/nios2}/Makefile (100%) rename {lib_nios2 => lib/nios2}/board.c (100%) rename {lib_nios2 => lib/nios2}/bootm.c (100%) rename {lib_nios2 => lib/nios2}/cache.S (100%) rename nios2_config.mk => lib/nios2/config.mk (100%) rename {lib_nios2 => lib/nios2}/divmod.c (100%) rename {lib_nios2 => lib/nios2}/math.h (100%) rename {lib_nios2 => lib/nios2}/mult.c (100%) rename {lib_nios2 => lib/nios2}/time.c (100%) rename {lib_ppc => lib/ppc}/Makefile (100%) rename {lib_ppc => lib/ppc}/bat_rw.c (100%) rename {lib_ppc => lib/ppc}/board.c (100%) rename {lib_ppc => lib/ppc}/bootm.c (100%) rename {lib_ppc => lib/ppc}/cache.c (100%) rename ppc_config.mk => lib/ppc/config.mk (100%) rename {lib_ppc => lib/ppc}/extable.c (100%) rename {lib_ppc => lib/ppc}/interrupts.c (100%) rename {lib_ppc => lib/ppc}/kgdb.c (100%) rename {lib_ppc => lib/ppc}/ppccache.S (100%) rename {lib_ppc => lib/ppc}/ppcstring.S (100%) rename {lib_ppc => lib/ppc}/ticks.S (100%) rename {lib_ppc => lib/ppc}/time.c (100%) rename {lib_sh => lib/sh}/Makefile (100%) rename {lib_sh => lib/sh}/board.c (100%) rename {lib_sh => lib/sh}/bootm.c (100%) rename sh_config.mk => lib/sh/config.mk (100%) rename {lib_sh => lib/sh}/time.c (100%) rename {lib_sh => lib/sh}/time_sh2.c (100%) rename {lib_sparc => lib/sparc}/Makefile (100%) rename {lib_sparc => lib/sparc}/board.c (100%) rename {lib_sparc => lib/sparc}/bootm.c (100%) rename {lib_sparc => lib/sparc}/cache.c (100%) rename sparc_config.mk => lib/sparc/config.mk (100%) rename {lib_sparc => lib/sparc}/interrupts.c (100%) rename {lib_sparc => lib/sparc}/time.c (100%)

9 36