September 2008 - U-Boot

[U-Boot] ARM Pull Request
by Jean-Christophe PLAGNIOL-VILLARD 12 Sep '08

12 Sep '08

Hi Wolfgang, Please pull The following changes since commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836: Heiko Schocher (1): muas3001: update BR4 settings are available in the git repository at: git://git.denx.de/u-boot-arm.git master Adrian Filipi (1): Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v. Andrew Dyer (3): arm920t fix constant error in start.S i.MX use u-boot baud rate and don't assume UART master clock i.mx change get_timer(base) to return time since base Claudio Scordino (1): Fix MACH_TYPE for the AT91RM9200DK board. Guennadi Liakhovetski (1): i.MX31: document timer precision option Gururaja Hebbar K R (1): ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h Hugo Villeneuve (1): ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c Jean-Christophe PLAGNIOL-VILLARD (1): ARM: synchronize mach-types.h with linux 2.6.27-rc6 Jens Scharsig (1): at91rm9200: fix errors with CONFIG_CMD_I2C_TREE Magnus Lilja (2): i.MX31: Add reset_timer() and modify get_timer_masked(). i.MX31: Make the SPI bus and chip select configurable for MC13783 Shinya Kuribayashi (1): make: Remove redundant __ARM__ addition when cross-compiling on *BSD README.imx31 | 13 + board/atmel/at91rm9200dk/at91rm9200dk.c | 2 +- config.mk | 9 - cpu/arm1136/mx31/interrupts.c | 24 +- cpu/arm920t/at91rm9200/i2c.c | 10 + cpu/arm920t/imx/interrupts.c | 2 +- cpu/arm920t/imx/serial.c | 56 +- cpu/arm920t/start.S | 6 +- cpu/arm926ejs/davinci/dp83848.c | 27 +- cpu/pxa/mmc.c | 4 +- doc/README.mx31 | 19 + drivers/rtc/mc13783-rtc.c | 6 +- include/asm-arm/mach-types.h | 3645 +++++++++++++++++++++++++++++-- include/configs/imx31_litekit.h | 3 + include/configs/mx31ads.h | 3 + include/configs/omap1510.h | 2 +- include/configs/omap730.h | 2 +- 17 files changed, 3648 insertions(+), 185 deletions(-) create mode 100644 README.imx31 create mode 100644 doc/README.mx31 mode change 100644 => 100755 include/configs/omap1510.h mode change 100644 => 100755 include/configs/omap730.h Best Regards, J.

2 1

[U-Boot] U-Boot and ELDK
by Roman Mashak 12 Sep '08

12 Sep '08

Hello. I apologize if my question sounds silly :) There are numerous toolchains and kits out there -- head's spinning. ELDK is one of them. In my understanding ELDK focuses on PowerPC architecture, but toolchains for ARM/MIPS architectures are also available. How reasonable is it to take it and use it for, let's say, ARM9 based platform ? How necessary is it to install ELDK in order to be able to compile U-Boot for non-PPC platform? Thanks. -- Roman Mashak

3 2

[U-Boot] [PATCH] MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
by Wolfgang Denk 12 Sep '08

12 Sep '08

Previous timeout was 50 seconds which is a pain to wait for if you have a system with no ethernet cable attached. Reduce this to 2.5 seconds as a compomise between fast boot and time needed by the PHY. Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- drivers/net/mpc512x_fec.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 54283fb..7078c4e 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -364,7 +364,7 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) /* * Wait for AN completion */ - timeout = 50000; + timeout = 2500; do { udelay (1000); -- 1.5.4.2

1 0

[U-Boot] ERROR: CTL:TIMEOUT - USB porting issue for UBoot on TEngine/SH7727
by thaoth 12 Sep '08

12 Sep '08

Hi, I am porting UBoot on TEngine/SH7727 and has an USB issue. Here is an error message: ERROR: CTL:TIMEOUT USB device not responding, giving up (status=20) 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found For detail, TEngine/SH7727 has one USB host controller, when I plugged USB Flash Memory there were 3 devices. And No unplugged USB device, they said 2 devices. => usb info 1: Hub, USB Revision 1.10 - OHCI Root Hub - Class: Hub - PacketSize: 8 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 0.0 Configuration: 1 - Interfaces: 1 Self Powered 0mA Interface: 0 - Alternate Setting 0, Endpoints: 1 - Class Hub - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms Configuration: 0 - Interfaces: 0 Bus Powered 0mA Configuration: 0 - Interfaces: 0 Bus Powered 0mA The problem sounded USB host controller driver could work well but submit_common_msg couldn't get description of USB flash memory device and it said "No storage device". Here is configuration of USB on UBoot /* USB Mass Storage Support*/ #define CONFIG_CMD_USB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_STORAGE 1 #define CFG_USB_OHCI_REGS_BASE 0xA4000400 #define CFG_USB_OHCI_SLOT_NAME "s3c2400" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 Could I have help? Please tell me if you had this issue before. Thank you for your helping. =) Here is a log data => usb start (Re)start USB... USB: INFO: aligned ghcca 8e01ad00 DEBUG: hc_reset DEBUG: USB HC reset_hc usb-s3c2400: ctrl = 0x0 ; DEBUG: OHCI controller usb-s3c2400 state DEBUG: control: 0x0000008f HCFS=operational IE PLE CBSR=3 DEBUG: cmdstatus: 0x00000000 SOC=0 DEBUG: intrstatus: 0x00000004 SF DEBUG: intrenable: 0x00000053 RHSC UE WDH SO DEBUG: hcca frame #001a DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000100 PPS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ 75] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB(rh) URB:[ 7e] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 INFO: Root-Hub: adr: 0 cmd(8): 00000680 0100 0000 0008 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ a1] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 01 00 00 08 00 usb_ohci.c: data(0/8): set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ b8] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 DEBUG: SUB(rh) URB:[ c5] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000500 0001 0000 0000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ ec] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x12 INFO: submit_control_msg DEBUG: SUB URB:[ 10e] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 DEBUG: SUB(rh) URB:[ 117] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0100 0000 0012 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 13a] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 01 00 00 12 00 usb_ohci.c: data(0/18): usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ 150] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB(rh) URB:[ 15a] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0008 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 17c] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 02 00 00 08 00 usb_ohci.c: data(0/8): usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x19 INFO: submit_control_msg DEBUG: SUB URB:[ 193] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 DEBUG: SUB(rh) URB:[ 19c] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0019 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 1bf] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 02 00 00 19 00 usb_ohci.c: data(0/25): get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 1de] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 DEBUG: SUB(rh) URB:[ 1eb] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000900 0001 0000 0000 INFO: WR:status 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 214] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 new device strings: Mfr=0, Product=1, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0 xFF INFO: submit_control_msg DEBUG: SUB URB:[ 22d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ 236] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0300 0000 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 259] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 03 00 00 ff 00 usb_ohci.c: data(0/255): USB device number 1 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF INFO: submit_control_msg DEBUG: SUB URB:[ 275] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ 27e] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0301 0409 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 2a1] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x0 usb_ohci.c: cmd(8): 80 06 01 03 09 04 ff 00 usb_ohci.c: data(0/255): Manufacturer Product OHCI Root Hub SerialNumber USB hub found usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 2be] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 2c7] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 2ea] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a0 06 00 29 00 00 04 00 usb_ohci.c: data(0/4): usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x9 INFO: submit_control_msg DEBUG: SUB URB:[ 300] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 DEBUG: SUB(rh) URB:[ 30a] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0009 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 32c] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x0 usb_ohci.c: cmd(8): a0 06 00 29 00 00 09 00 usb_ohci.c: data(0/9): 2 ports detected ganged power switching standalone hub no over-current protection power on to power good time: 4ms hub controller current requirement: 0mA port 1 is removable port 2 is removable usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 354] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 35d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a0 0000 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 380] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a0 00 00 00 00 00 04 00 usb_ohci.c: data(0/4): get_hub_status returned status 0, change 0 local power source is good no over-current condition exists enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 3a2] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 DEBUG: SUB(rh) URB:[ 3af] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0001 0000 INFO: WR:portstatus[0] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 45e] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 port 1 returns 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 479] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 DEBUG: SUB(rh) URB:[ 486] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0002 0000 INFO: WR:portstatus[1] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 536] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 port 2 returns 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 551] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 55a] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 57d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): Port 1 Status 101 Change 1 port 1 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 597] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 5a1] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 5c3] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): portstatus 101, change 1, High Speed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ 5dd] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 DEBUG: SUB(rh) URB:[ 5ea] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0010 0001 0000 INFO: WR:portstatus[0] 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000101 PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 613] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ 736] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 DEBUG: SUB(rh) URB:[ 743] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0001 0000 INFO: WR:portstatus[0] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130100 PRSC PESC CSC PPS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 76d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 88d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 896] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 8ba] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): portstatus 301, change 13, Low Speed STAT_C_CONNECTION = 1 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 0 cannot reset port 1!? usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 8db] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 8e5] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 909] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): Port 2 Status 101 Change 1 port 2 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ 924] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ 92d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ 951] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): portstatus 101, change 1, High Speed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x2 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ 96a] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 DEBUG: SUB(rh) URB:[ 978] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0010 0002 0000 INFO: WR:portstatus[1] 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000101 PPS CCS DEBUG: RET(rh) URB:[ 9a2] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 hub_port_reset: resetting port 1... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ ac5] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 DEBUG: SUB(rh) URB:[ ad2] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0002 0000 INFO: WR:portstatus[1] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS DEBUG: RET(rh) URB:[ afd] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ c1d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ c26] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS DEBUG: RET(rh) URB:[ c4a] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): portstatus 103, change 10, High Speed STAT_C_CONNECTION = 0 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x2 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ c6a] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 DEBUG: SUB(rh) URB:[ c77] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0014 0002 0000 INFO: WR:portstatus[1] 0x100000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000103 PPS PES CCS DEBUG: RET(rh) URB:[ ca2] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ dc3] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB URB:[ dca] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 hc_interrupt regs->intrstatus=68;regs->intrenable=83;ints=64 submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 1, len 3 DEBUG: dl_done_list: processing TD 2, len 3 submit_common_msg hc_interrupt():stat = 0 DEBUG: RET(ctlr) URB:[ df0] dev: 0,ep: 0-I,type:CTRL,len:8/8 stat:0x0 set address 2 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ e01] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 02 00 00 00 00 00 DEBUG: SUB URB:[ e0c] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 02 00 00 00 00 00 DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 1, len 2 submit_common_msg hc_interrupt():stat = 0 DEBUG: RET(ctlr) URB:[ e2e] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 00 05 02 00 00 00 00 00 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x12 INFO: submit_control_msg DEBUG: SUB URB:[ e50] dev: 2,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 DEBUG: SUB URB:[ e57] dev: 2,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 1, len 3 DEBUG: dl_done_list: processing TD 2, len 3 submit_common_msg hc_interrupt():stat = 0 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 submit_common_msg hc_interrupt():stat = 0 DEBUG: RET(ctlr) URB:[ e87] dev: 2,ep: 0-I,type:CTRL,len:18/18 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ e98] dev: 2,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB URB:[ e9f] dev: 2,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 1, len 3 DEBUG: dl_done_list: processing TD 2, len 3 submit_common_msg hc_interrupt():stat = 0 DEBUG: RET(ctlr) URB:[ ec2] dev: 2,ep: 0-I,type:CTRL,len:8/8 stat:0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x20 INFO: submit_control_msg DEBUG: SUB URB:[ ed2] dev: 2,ep: 0-I,type:CTRL,len:0/32 stat:0x80000000 DEBUG: SUB URB:[ ed9] dev: 2,ep: 0-I,type:CTRL,len:0/32 stat:0x80000000 DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 1, len 3 submit_common_msg hc_interrupt():stat = 0 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 DEBUG: dl_done_list: processing TD 2, len 3 submit_common_msg hc_interrupt():stat = 0 DEBUG: RET(ctlr) URB:[ f09] dev: 2,ep: 0-I,type:CTRL,len:32/32 stat:0x0 get_conf_no 0 Result 32, wLength 32 if 0, ep 0 if 0, ep 1 ##EP epmaxpacketin[1] = 64 U-Boot 1.3.4-00404-gab00e7a-dirty (Sep 10 2008 - 16:30:38) CPU: SH3 BOARD: Hitachi UL MS7720SE DRAM: 32MB FLASH: 8MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial ==================================================== T-Engine(MS7727CP01) DownLoader Ver1.8L ---------------------------------------------------- ==================================================== H[elp] for help messages... Ready>fl 0 SH7727 Flash Memory Change Value! Flash Memory data copy to RAM Please Send A S-format Record Start Addrs = 00000000 End Addrs = 0001B12F Transfer complete Flash chip erase: complete Program :complete Flash write complete Ready> U-Boot 1.3.4-00404-gab00e7a-dirty (Sep 10 2008 - 16:30:38) CPU: SH3 BOARD: Hitachi UL MS7720SE DRAM: 32MB FLASH: 8MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial => usb start (Re)start USB... USB: INFO: aligned ghcca 8e01ad00 DEBUG: hc_reset U-Boot 1.3.4-00404-gab00e7a-dirty (Sep 10 2008 - 16:30:38) CPU: SH3 BOARD: Hitachi UL MS7720SE DRAM: 32MB FLASH: 8MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial => usb start (Re)start USB... USB: INFO: aligned ghcca 8e01ad00 DEBUG: hc_reset U-Boot 1.3.4-00404-gab00e7a-dirty (Sep 10 2008 - 16:30:38) CPU: SH3 BOARD: Hitachi UL MS7720SE DRAM: 32MB FLASH: 8MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial => ==================================================== T-Engine(MS7727CP01) DownLoader Ver1.8L ---------------------------------------------------- ==================================================== H[elp] for help messages... Ready>fl 0 SH7727 Flash Memory Change Value! Flash Memory data copy to RAM Please Send A S-format Record Start Addrs = 00000000 End Addrs = 0001B12F Transfer complete Flash chip erase: complete Program :complete Flash write complete Ready>*!Tb U-Boot 1.3.4-00404-gab00e7a-dirty (Sep 10 2008 - 16:30:38) CPU: SH3 BOARD: Hitachi UL MS7720SE DRAM: 32MB FLASH: 8MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial => usb start (Re)start USB... USB: INFO: aligned ghcca 8e01ad00 DEBUG: hc_reset DEBUG: USB HC reset_hc usb-s3c2400: ctrl = 0x0 ; DEBUG: OHCI controller usb-s3c2400 state DEBUG: control: 0x0000008f HCFS=operational IE PLE CBSR=3 DEBUG: cmdstatus: 0x00000000 SOC=0 DEBUG: intrstatus: 0x00000004 SF DEBUG: intrenable: 0x00000053 RHSC UE WDH SO DEBUG: hcca frame #000d DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000100 PPS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 INFO: Root-Hub: adr: 0 cmd(8): 00000680 0100 0000 0008 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000100 PPS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 01 00 00 08 00 usb_ohci.c: data(0/8): set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000500 0001 0000 0000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 0,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 00 05 01 00 00 00 00 00 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x12 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0100 0000 0012 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/18 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 01 00 00 12 00 usb_ohci.c: data(0/18): usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0008 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/8 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 02 00 00 08 00 usb_ohci.c: data(0/8): usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x19 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0200 0000 0019 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/25 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 02 00 00 19 00 usb_ohci.c: data(0/25): get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000900 0001 0000 0000 INFO: WR:status 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 00 09 01 00 00 00 00 00 new device strings: Mfr=0, Product=1, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0 xFF INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0300 0000 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x0 usb_ohci.c: cmd(8): 80 06 00 03 00 00 ff 00 usb_ohci.c: data(0/255): USB device number 1 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 00000680 0301 0409 00ff DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/255 stat:0x0 usb_ohci.c: cmd(8): 80 06 01 03 09 04 ff 00 usb_ohci.c: data(0/255): Manufacturer Product OHCI Root Hub SerialNumber USB hub found usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a0 06 00 29 00 00 04 00 usb_ohci.c: data(0/4): usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x9 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000006a0 2900 0000 0009 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/9 stat:0x0 usb_ohci.c: cmd(8): a0 06 00 29 00 00 09 00 usb_ohci.c: data(0/9): 2 ports detected ganged power switching standalone hub no over-current protection power on to power good time: 4ms hub controller current requirement: 0mA port 1 is removable port 2 is removable usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a0 0000 0000 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a0 00 00 00 00 00 04 00 usb_ohci.c: data(0/4): get_hub_status returned status 0, change 0 local power source is good no over-current condition exists enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0001 0000 INFO: WR:portstatus[0] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 08 00 01 00 00 00 port 1 returns 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0008 0002 0000 INFO: WR:portstatus[1] 0x100 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 08 00 02 00 00 00 port 2 returns 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): Port 1 Status 101 Change 1 port 1 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00010101 CSC PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): portstatus 101, change 1, High Speed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0010 0001 0000 INFO: WR:portstatus[0] 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000101 PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 10 00 01 00 00 00 hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0001 0000 INFO: WR:portstatus[0] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000311 LSDA PPS PRS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 04 00 01 00 00 00 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0001 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 01 00 04 00 usb_ohci.c: data(0/4): portstatus 303, change 10, Low Speed STAT_C_CONNECTION = 0 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 01 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0014 0001 0000 INFO: WR:portstatus[0] 0x100000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000303 LSDA PPS PES CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 14 00 01 00 00 00 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 hc_interrupt regs->intrstatus=68;regs->intrenable=83;ints=64 submit_common_msg hc_interrupt():stat = 255 DEBUG: % hc_interrupt regs->intrstatus=6;regs->intrenable=83;ints=2 submit_common_msg hc_interrupt():stat = 0 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 ERROR: CTL:TIMEOUT DEBUG: submit_common_msg: TO status ff DEBUG: RET(ctlr) URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x20 USB device not responding, giving up (status=20) hub: disabling port 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 01 00 01 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 01 00 01 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0001 0001 0000 INFO: WR:portstatus[0] 0x1 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 01 00 01 00 00 00 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): Port 2 Status 101 Change 1 port 2 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00010101 CSC PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): portstatus 101, change 1, High Speed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x2 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0010 0002 0000 INFO: WR:portstatus[1] 0x10000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000101 PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 10 00 02 00 00 00 hub_port_reset: resetting port 1... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000323 0004 0002 0000 INFO: WR:portstatus[1] 0x10 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000111 PPS PRS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 03 04 00 02 00 00 00 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x80000000 INFO: Root-Hub: adr: 1 cmd(8): 000000a3 0000 0002 0004 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-I,type:CTRL,len:0/4 stat:0x0 usb_ohci.c: cmd(8): a3 00 00 00 02 00 04 00 usb_ohci.c: data(0/4): portstatus 103, change 10, High Speed STAT_C_CONNECTION = 0 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x2 length 0x 0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0014 0002 0000 INFO: WR:portstatus[1] 0x100000 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000103 PPS PES CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 14 00 02 00 00 00 New Device 2 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 DEBUG: SUB URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x80000000 hc_interrupt regs->intrstatus=68;regs->intrenable=83;ints=64 submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 DEBUG: % DEBUG: hc_interrupt: returning.. submit_common_msg hc_interrupt():stat = 255 ERROR: CTL:TIMEOUT DEBUG: submit_common_msg: TO status ff DEBUG: RET(ctlr) URB:[ d] dev: 0,ep: 0-I,type:CTRL,len:0/8 stat:0x20 USB device not responding, giving up (status=20) hub: disabling port 2 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x2 length 0x0 INFO: submit_control_msg DEBUG: SUB URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 01 00 02 00 00 00 DEBUG: SUB(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x80000000 usb_ohci.c: cmd(8): 23 01 01 00 02 00 00 00 INFO: Root-Hub: adr: 1 cmd(8): 00000123 0001 0002 0000 INFO: WR:portstatus[1] 0x1 DEBUG: roothub.a: 02001202 POTPGT=2 NOCP NPS NDP=2 DEBUG: roothub.b: 00000000 PPCM=0000 DR=0000 DEBUG: roothub.status: 00000000 DEBUG: roothub.portstatus [0] = 0x00000301 LSDA PPS CCS DEBUG: roothub.portstatus [1] = 0x00000101 PPS CCS DEBUG: RET(rh) URB:[ d] dev: 1,ep: 0-O,type:CTRL,len:0/0 stat:0x0 usb_ohci.c: cmd(8): 23 01 01 00 02 00 00 00 3 USB Device(s) found scanning bus for storage devices... Storage Device(s) found Thank you a lot. Best regards, -- View this message in context: http://www.nabble.com/ERROR%3A-CTL%3ATIMEOUT---USB-porting-issue-for-UBoot-… Sent from the Uboot - Users mailing list archive at Nabble.com.

1 1

[U-Boot-Users] [T-Engine] UBoot configuration for T-Engine/SH7727 MS7727CP02 DevKit
by thaoth 12 Sep '08

12 Sep '08

Dear All, I would like to port a Uboot loader on T-Engine/SH7727 MS7727CP02 DevKit. Here is the configuration of this board Renesas Technology SH7727(SH3-DSP, internal clock 96MHz / external clock 48MHz) Flash Memory: 8MB SDRAM: 32MB Memory map of overall system is shown as below. 0x00000000 +-------------------------------+-------- | User area (P0)| 0x10000000 +-------------------------------+ | (Unused) (P0)| Enabled as a virtual memory 0x40000000 +-------------------------------+ | System / Common area(1) (P0)| 0x80000000 +-------------------------------+-------- | Physical memory area (P1) | | (Cache On) | 0xa0000000 +-------------------------------+ | Physical memory area (P2) | | (Cache Off) | 0xc0000000 +-------------------------------+-------- | System/Common area(2) (P3) | Enabled as a virtual memory 0xe0000000 +-------------------------------+-------- | I/O area (P4) | 0xffffffff +-------------------------------+ Physical memory area (P1 area) memory map is shown as below. 0x80000000 +-------------------------------+-------- | ROM area(8MB) | Area 0 | (Unused area included) | 0x84000000 +-------------------------------+-------- | I/O area | Area 1-2 | (Not used as a general rule)| 0x8c000000 +-------------------------------+-------- | RAM area(64MB) | Area 3 0x90000000 +-------------------------------+-------- | I/O area | Area 4-7 | (Not used as a general rule)| 0xa0000000 +-------------------------------+-------- Here is configuration of UBoot \board\ms7727se\config.mk : TEXT_BASE = 0x8DFC0000 \board\ms7727se\u-boot.lds OUTPUT_FORMAT("elf32-sh-tkernel", "elf32-sh-tkernel", "elf32-sh-tkernel") SECTIONS { . = 0x8C000000 + (32*1024*1024) - (256*1024); \include\configs\ms7727se.h /* MEMORY */ #define MS7720SE_SDRAM_BASE 0x8C000000 #define MS7720SE_FLASH_BASE_1 0x80000000 //0xA0000000 #define MS7720SE_FLASH_BANK_SIZE (8 * 1024 * 1024) #define CFG_MEMTEST_START MS7720SE_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) #define CFG_SDRAM_BASE MS7720SE_SDRAM_BASE #define CFG_SDRAM_SIZE (32 * 1024 * 1024) #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) #define CFG_MONITOR_BASE MS7720SE_FLASH_BASE_1 #define CFG_MONITOR_LEN (128 * 1024) #define CFG_MALLOC_LEN (256 * 1024) #define CFG_GBL_DATA_SIZE 256 #define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ #define CFG_FLASH_CFI #define CFG_FLASH_CFI_DRIVER #undef CFG_FLASH_QUIET_TEST #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_BASE MS7720SE_FLASH_BASE_1 Would you please help me have a look this setting? 1. Is this setting correct ? I am confusing about TEXT_BASE with CFG_LOAD_ADDR. Here is definition - CFG_FLASH_BASE: Physical start address of Flash memory. - CFG_MONITOR_BASE: Physical start address of boot monitor code (set by make config files to be same as the text base address (TEXT_BASE) used when linking) - same as CFG_FLASH_BASE when booting from flash. If I am wrong, please tell me how to correct these setting. 2. "ld" T-Engine toolchain only supports elf32-sh-tkernel target, but reference implementation (example) tell "elf32-sh-linux" is expected target. Is the setting correct? \board\ms7727se\u-boot.lds Original : OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -> My changes OUTPUT_FORMAT("elf32-sh-tkernel", "elf32-sh-tkernel", "elf32-sh-tkernel") I am newbie in embedded system. I am appreciating your helping. Thank you a lot. -- View this message in context: http://www.nabble.com/-T-Engine--UBoot-configuration-for-T-Engine-SH7727-MS… Sent from the Uboot - Users mailing list archive at Nabble.com.

4 19

[U-Boot] [PATCH] ppc4xx: Fix compilation of v5fx30teval_flash
by Ricardo Ribalda Delgado 12 Sep '08

12 Sep '08

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda(a)uam.es> --- Makefile | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index e8bbd78..116d9e7 100644 --- a/Makefile +++ b/Makefile @@ -1488,9 +1488,9 @@ v5fx30teval_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ - > $(obj)/board/avnet/v5fx30teval/config.tmp + > $(obj)board/avnet/v5fx30teval/config.tmp @echo "TEXT_BASE := 0xFF1C0000" \ - >> $(obj)/board/avnet/v5fx30teval/config.tmp + >> $(obj)board/avnet/v5fx30teval/config.tmp @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet VOH405_config: unconfig -- 1.5.6.5

2 3

[U-Boot] [PATCH] ppc4xx:FIX in-tree build for ppc440-generic boards
by Ricardo Ribalda Delgado 12 Sep '08

12 Sep '08

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda(a)uam.es> --- board/xilinx/ppc440-generic/config.mk | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/xilinx/ppc440-generic/config.mk b/board/xilinx/ppc440-generic/config.mk index 8d220da..6d76755 100644 --- a/board/xilinx/ppc440-generic/config.mk +++ b/board/xilinx/ppc440-generic/config.mk @@ -22,4 +22,4 @@ # MA 02111-1307 USA # -sinclude $(obj)/board/$(BOARDDIR)/config.tmp +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -- 1.5.6.5

2 2

[U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.27-rc6
by Jean-Christophe PLAGNIOL-VILLARD 12 Sep '08

12 Sep '08

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> Due to ML limitation this patch is available at http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=3fb7cb808320dc6a3d73… Best Regards, J.

1 0

[U-Boot] [PATCH] ARM: Use do_div() instead of division for "long long".
by Wolfgang Denk 12 Sep '08

12 Sep '08

From: Sergei Poselenov <sposelenov(a)emcraft.com> Signed-off-by: Sergei Poselenov <sposelenov(a)emcraft.com> Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- With some (more recent) compiler versions there are problems because of the use of "long long" divisions in the U-Boot code. For ARM, this requires the __udivdi3 GCC library function, which currently is not present in lib_arm. This function was present in older 2.6 kernels, but at some point it was removed from here, with suggestion to use do_div() instead. In U-boot, the do_div() function is available, too, so this patch generally does the replacement of the "long long" divisions to do_div() to avoid the aforementions issues. board/integratorcp/integratorcp.c | 7 ++++++- board/trab/tsc2000.c | 10 ++++++---- cpu/arm1176/s3c64xx/interrupts.c | 5 ++++- cpu/arm946es/config.mk | 7 +++++++ cpu/arm_intcm/config.mk | 7 +++++++ 5 files changed, 30 insertions(+), 6 deletions(-) diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c index d6d6e13..220513f 100644 --- a/board/integratorcp/integratorcp.c +++ b/board/integratorcp/integratorcp.c @@ -34,6 +34,7 @@ */ #include <common.h> +#include <div64.h> DECLARE_GLOBAL_DATA_PTR; @@ -244,7 +245,11 @@ ulong get_timer_masked (void) total_count += lastdec - now; } lastdec = now; - timestamp = (ulong)(total_count/div_timer); + + /* Reuse "now" */ + now = total_count; + do_div(now, div_timer); + timestamp = now; return timestamp; } diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index 382a85b..f13a5a9 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -27,6 +27,7 @@ #include <common.h> #include <s3c2400.h> +#include <div64.h> #include "tsc2000.h" #include "Pt1000_temp_data.h" @@ -332,6 +333,7 @@ void tsc2000_reg_init (void) int tsc2000_interpolate(long value, long data[][2], long *result) { int i; + unsigned long long val; /* the data is sorted and the first element is upper * limit so we can easily check for out-of-band values @@ -347,10 +349,10 @@ int tsc2000_interpolate(long value, long data[][2], long *result) result in 'long long'. */ - *result = data[i-1][1] + - ((unsigned long long)(data[i][1] - data[i-1][1]) - * (unsigned long long)(value - data[i-1][0])) - / (data[i][0] - data[i-1][0]); + val = ((unsigned long long)(data[i][1] - data[i-1][1]) + * (unsigned long long)(value - data[i-1][0])); + do_div(val, (data[i][0] - data[i-1][0])); + *result = data[i-1][1] + val; return 0; } diff --git a/cpu/arm1176/s3c64xx/interrupts.c b/cpu/arm1176/s3c64xx/interrupts.c index 8356ae4..e34369f 100644 --- a/cpu/arm1176/s3c64xx/interrupts.c +++ b/cpu/arm1176/s3c64xx/interrupts.c @@ -41,6 +41,7 @@ #include <common.h> #include <asm/proc-armv/ptrace.h> #include <s3c6400.h> +#include <div64.h> static ulong timer_load_val; @@ -148,7 +149,9 @@ void reset_timer(void) ulong get_timer_masked(void) { - return get_ticks() / (timer_load_val / (100 * CFG_HZ)); + unsigned long long res = get_ticks(); + do_div (res, (timer_load_val / (100 * CFG_HZ))); + return res; } ulong get_timer(ulong base) diff --git a/cpu/arm946es/config.mk b/cpu/arm946es/config.mk index 81ca288..f774c7e 100644 --- a/cpu/arm946es/config.mk +++ b/cpu/arm946es/config.mk @@ -25,3 +25,10 @@ PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ -msoft-float PLATFORM_CPPFLAGS += -march=armv4 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm_intcm/config.mk b/cpu/arm_intcm/config.mk index 81ca288..f774c7e 100644 --- a/cpu/arm_intcm/config.mk +++ b/cpu/arm_intcm/config.mk @@ -25,3 +25,10 @@ PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ -msoft-float PLATFORM_CPPFLAGS += -march=armv4 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -- 1.5.4.2

3 5

[U-Boot] phys_size_t not defined in mips arch.
by Luigi 'Comio' Mantellini 11 Sep '08

11 Sep '08

Hi ML, i'm working on a mips SoC using the u-boot trunk (updated to 9 Sept). I noticed that the phys_szie_t is not defined for this cpu. is it a known problem or I have some problem on my u-boot tree? Thanks and best regards. luigi -- Luigi Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 Email: luigi.mantellini(a)idf-hit.com

2 2