December 2008 - U-Boot

[U-Boot] [PATCH] POST Make: fix the sub-dir dependencies missing.
by Wolfgang Denk 15 Dec '08

15 Dec '08

From: Yuri Tikhonov <yur(a)emcraft.com> Signed-off-by: Yuri Tikhonov <yur(a)emcraft.com> --- post/Makefile | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/post/Makefile b/post/Makefile index a402e6a..666a896 100644 --- a/post/Makefile +++ b/post/Makefile @@ -45,7 +45,12 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) LIB := $(obj)$(LIB) -all: $(LIB) +all: postdeps $(LIB) + +postdeps: + @for lib in $(SPLIB-y) ; do \ + $(MAKE) -C `dirname $$lib` all ; \ + done # generic POST library $(GPLIB): $(obj).depend $(OBJS) -- 1.5.4.2

1 1

[U-Boot] U-Boot hangs after uncompressing image
by Marco Antônio Possamai 15 Dec '08

15 Dec '08

Hello, all! As the title says, it hangs when uncompressing the image. The board is the MPC5200b Lite. Got the device-tree blob after compiling it from the lite5200b.dts. Used the latest device-tree compiler (v1.2.0); Got the file cuImage.lite5200b to pass it as image. Stored 0x00010000 in fdt_addr_r. Stored the path to the dtb file in fdt_file and the image file in the bootfile. Image's at 0x01000000. Some commands I've used: $ tftp ${fdt_addr_r} ${fdt_file} $ fdt addr ${fdt_addr_r} $ tftp 0x01000000 ${bootfile} $ bootm 0x01000000 - ${fdt_addr_r} Here's what the GtkTerm spills: ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-2.6.26.8-dirty Created: 2008-12-10 18:40:18 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1741950 Bytes = 1.7 MB Load Address: 00400000 Entry Point: 00400550 Verifying Checksum ... OK ## Flattened Device Tree blob at 00010000 Booting using the fdt blob at 0x10000 Uncompressing Kernel Image ... OK Then it hangs... I've read the FAQ section about it and it simply says it could be a bad device-tree. I'm not sure how to check it. I'm using the latest U-Boot and the 2.6.26.8-dirty (as shown above), by the way. Thanks for your patience. My PC specs: Ubuntu 8.04 (Hardy Heron) Kernel Linux 2.6.24-22-generic GNOME 2.22.3 Marco Antônio Possamai Universidade Federal de Santa Catarina -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com

1 0

[U-Boot] [PATCH] at91: add at91sam9xeek board support (typo)
by Nicolas Ferre 15 Dec '08

15 Dec '08

Typo: CFG_ convert to CONFIG_SYS_ Signed-off-by: Nicolas Ferre <nicolas.ferre(a)atmel.com> --- Makefile | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 7be1de2..74dfcca 100644 --- a/Makefile +++ b/Makefile @@ -2605,13 +2605,13 @@ at91sam9xeek_dataflash_cs1_config \ at91sam9xeek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ - echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ - echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ - echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 -- 1.5.3.7

1 0

[U-Boot] [PATCH] MIPS: Add VCT board series support (Part 3/3)
by Stefan Roese 15 Dec '08

15 Dec '08

This patch adds support for the Micronas VCT board series. Currently the following platforms are supported: vct_premium vct_premium_small vct_premium_onenand vct_premium_onenand_small vct_platinum vct_platinum_small vct_platinum_onenand vct_platinum_onenand_small vct_platinumavc vct_platinumavc_small vct_platinumavc_onenand vct_platinumavc_onenand_small One speciality of the VCT board is that it can't access NOR FLASH memory-mapped. It has to use special access functions for this. Signed-off-by: Stefan Roese <sr(a)denx.de> --- MAINTAINERS | 4 ++++ MAKEALL | 12 ++++++++++++ Makefile | 35 +++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 0 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 127604b..a91f427 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -659,6 +659,10 @@ Thomas Lange <thomas(a)corelatus.se> Vlad Lungu <vlad.lungu(a)windriver.com> qemu_mips MIPS32 +Stefan Roese <sr(a)denx.de> + + vct_xxx MIPS32 4Kc + ######################################################################### # Nios-32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index a16549c..94dc505 100755 --- a/MAKEALL +++ b/MAKEALL @@ -610,6 +610,18 @@ LIST_arm=" \ LIST_mips4kc=" \ incaip \ qemu_mips \ + vct_platinum \ + vct_platinum_small \ + vct_platinum_onenand \ + vct_platinum_onenand_small \ + vct_platinumavc \ + vct_platinumavc_small \ + vct_platinumavc_onenand \ + vct_platinumavc_onenand_small \ + vct_premium \ + vct_premium_small \ + vct_premium_onenand \ + vct_premium_onenand_small \ " LIST_mips5kc=" \ diff --git a/Makefile b/Makefile index 1fe9e20..0c6dd8f 100644 --- a/Makefile +++ b/Makefile @@ -3005,6 +3005,41 @@ incaip_config: unconfig tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229 +vct_premium_config \ +vct_premium_small_config \ +vct_premium_onenand_config \ +vct_premium_onenand_small_config \ +vct_platinum_config \ +vct_platinum_small_config \ +vct_platinum_onenand_config \ +vct_platinum_onenand_small_config \ +vct_platinumavc_config \ +vct_platinumavc_small_config \ +vct_platinumavc_onenand_config \ +vct_platinumavc_onenand_small_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _premium,$@)" ] ; then \ + echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ + $(XECHO) "... on Premium board variant" ; \ + fi + @if [ "$(findstring _platinum_,$@)" ] ; then \ + echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ + $(XECHO) "... on Platinum board variant" ; \ + fi + @if [ "$(findstring _platinumavc,$@)" ] ; then \ + echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ + $(XECHO) "... on PlatinumAVC board variant" ; \ + fi + @if [ "$(findstring _onenand,$@)" ] ; then \ + echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ + $(XECHO) "... on OneNAND board variant" ; \ + fi + @if [ "$(findstring _small,$@)" ] ; then \ + echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ + $(XECHO) "... stripped down image variant" ; \ + fi + @$(MKCONFIG) -a vct mips mips vct micronas + ######################################################################### ## MIPS32 AU1X00 ######################################################################### -- 1.6.0.5

1 0

[U-Boot] [PATCH] MIPS: Add VCT board series support (Part 2/3)
by Stefan Roese 15 Dec '08

15 Dec '08

This patch adds support for the Micronas VCT board series. Currently the following platforms are supported: vct_premium vct_premium_small vct_premium_onenand vct_premium_onenand_small vct_platinum vct_platinum_small vct_platinum_onenand vct_platinum_onenand_small vct_platinumavc vct_platinumavc_small vct_platinumavc_onenand vct_platinumavc_onenand_small One speciality of the VCT board is that it can't access NOR FLASH memory-mapped. It has to use special access functions for this. Signed-off-by: Stefan Roese <sr(a)denx.de> --- board/micronas/vct/ebi.h | 95 +++++++++++ board/micronas/vct/vct.h | 97 +++++++++++ board/micronas/vct/vcth/reg_dcgu.h | 25 +++ board/micronas/vct/vcth/reg_ebi.h | 242 ++++++++++++++++++++++++++ board/micronas/vct/vcth/reg_fwsram.h | 73 ++++++++ board/micronas/vct/vcth/reg_gpio.h | 32 ++++ board/micronas/vct/vcth/reg_wdt.h | 24 +++ board/micronas/vct/vcth2/reg_ebi.h | 290 +++++++++++++++++++++++++++++++ board/micronas/vct/vctv/reg_dcgu.h | 25 +++ board/micronas/vct/vctv/reg_ebi.h | 290 +++++++++++++++++++++++++++++++ board/micronas/vct/vctv/reg_gpio.h | 32 ++++ board/micronas/vct/vctv/reg_wdt.h | 24 +++ include/configs/vct.h | 310 ++++++++++++++++++++++++++++++++++ 13 files changed, 1559 insertions(+), 0 deletions(-) create mode 100644 board/micronas/vct/ebi.h create mode 100644 board/micronas/vct/vct.h create mode 100644 board/micronas/vct/vcth/reg_dcgu.h create mode 100644 board/micronas/vct/vcth/reg_ebi.h create mode 100644 board/micronas/vct/vcth/reg_fwsram.h create mode 100644 board/micronas/vct/vcth/reg_gpio.h create mode 100644 board/micronas/vct/vcth/reg_wdt.h create mode 100644 board/micronas/vct/vcth2/reg_ebi.h create mode 100644 board/micronas/vct/vctv/reg_dcgu.h create mode 100644 board/micronas/vct/vctv/reg_ebi.h create mode 100644 board/micronas/vct/vctv/reg_gpio.h create mode 100644 board/micronas/vct/vctv/reg_wdt.h create mode 100644 include/configs/vct.h diff --git a/board/micronas/vct/ebi.h b/board/micronas/vct/ebi.h new file mode 100644 index 0000000..69456bd --- /dev/null +++ b/board/micronas/vct/ebi.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EBI__ +#define __EBI__ + +#include <common.h> +#include <asm/io.h> +#include "vct.h" + +#define EXT_DEVICE_CHANNEL_3 (0x30000000) +#define EXT_DEVICE_CHANNEL_2 (0x20000000) +#define EXT_DEVICE_CHANNEL_1 (0x10000000) +#define EXT_CPU_ACCESS_ACTIVE (0x00000001) +#define EXT_DMA_ACCESS_ACTIVE (1 << 14) +#define EXT_CPU_IORDY_SL (0x00000001) + +#define EBI_CPU_WRITE (1 << 31) +#define EBI_CPU_ID_SHIFT (28) +#define EBI_CPU_ADDR_MASK ~(~0UL << EBI_CPU_ID_SHIFT) + +/* position of various bit slices in timing register EBI_DEV[01]_TIM1_RD1 */ +#define ADDR_LATCH_ENABLE 0 +#define ADDR_ACTIVATION 4 +#define CHIP_SELECT_START 8 +#define OUTPUT_ENABLE_START 12 +#define WAIT_TIME 28 +#define READ_DURATION 20 + +/* position of various bit slices in timing register EBI_DEV[01]_TIM1_RD2 */ +#define OUTPUT_ENABLE_END 0 +#define CHIP_SELECT_END 4 +#define ADDR_DEACTIVATION 8 +#define RECOVER_TIME 12 +#define ACK_TIME 20 + +/* various bits in configuration register EBI_DEV[01]_CONFIG1 */ +#define EBI_EXTERNAL_DATA_8 (1 << 8) +#define EBI_EXT_ADDR_SHIFT (1 << 22) +#define EBI_EXTERNAL_DATA_16 EBI_EXT_ADDR_SHIFT +#define EBI_CHIP_SELECT_1 0x2 +#define EBI_CHIP_SELECT_2 0x4 +#define EBI_BUSY_EN_RD (1 << 12) +#define DIR_ACCESS_WRITE (1 << 20) +#define DIR_ACCESS_MASK (1 << 20) + +/* various bits in configuration register EBI_DEV[01]_CONFIG2 */ +#define ADDRESS_INCREMENT_ON 0x0 +#define ADDRESS_INCREMENT_OFF 0x100 +#define QUEUE_LENGTH_1 0x40 +#define QUEUE_LENGTH_2 0x80 +#define QUEUE_LENGTH_3 0xC0 +#define QUEUE_LENGTH_4 0 +#define CPU_TRANSFER_SIZE_32 0 +#define CPU_TRANSFER_SIZE_16 0x10 +#define CPU_TRANSFER_SIZE_8 0x20 +#define READ_ENDIANNESS_ABCD 0 +#define READ_ENDIANNESS_DCBA 0x4 +#define READ_ENDIANNESS_BADC 0x8 +#define READ_ENDIANNESS_CDAB 0xC +#define WRITE_ENDIANNESS_ABCD 0 +#define WRITE_ENDIANNESS_DCBA 0x1 +#define WRITE_ENDIANNESS_BADC 0x2 +#define WRITE_ENDIANNESS_CDAB 0x3 + +/* various bits in configuration register EBI_CTRL_SIG_ACTLV */ +#define IORDY_ACTIVELEVEL_HIGH (1 << 14) +#define ALE_ACTIVELEVEL_HIGH (1 << 8) + +/* bits in register EBI_SIG_LEVEL */ +#define IORDY_LEVEL_MASK 1 + +static inline void ebi_wait(void) +{ + while (reg_read(EBI_STATUS(EBI_BASE)) & EXT_CPU_ACCESS_ACTIVE) + ; /* wait */ +} + +#endif diff --git a/board/micronas/vct/vct.h b/board/micronas/vct/vct.h new file mode 100644 index 0000000..c14f46d --- /dev/null +++ b/board/micronas/vct/vct.h @@ -0,0 +1,97 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * Copyright (C) 2006 Micronas GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/io.h> + +#include "ebi.h" + +#ifdef CONFIG_VCT_PREMIUM +/* Global start address of all memory mapped registers */ +#define REG_GLOBAL_START_ADDR 0xbf800000 +#define TOP_BASE 0x000c8000 + +#include "vcth/reg_ebi.h" +#include "vcth/reg_dcgu.h" +#include "vcth/reg_wdt.h" +#include "vcth/reg_gpio.h" +#include "vcth/reg_fwsram.h" +#endif + +#ifdef CONFIG_VCT_PLATINUM +/* Global start address of all memory mapped registers */ +#define REG_GLOBAL_START_ADDR 0xbf800000 +#define TOP_BASE 0x000c8000 + +#include "vcth2/reg_ebi.h" +#include "vcth/reg_dcgu.h" +#include "vcth/reg_wdt.h" +#include "vcth/reg_gpio.h" +#include "vcth/reg_fwsram.h" +#endif + +#ifdef CONFIG_VCT_PLATINUMAVC +/* Global start address of all memory mapped registers */ +#define REG_GLOBAL_START_ADDR 0xbdc00000 +#define TOP_BASE 0x00050000 + +#include "vctv/reg_ebi.h" +#include "vctv/reg_dcgu.h" +#include "vctv/reg_wdt.h" +#include "vctv/reg_gpio.h" +#endif + +#ifndef _VCT_H +#define _VCT_H + +/* + * Defines + */ +#define PRID_COMP_LEGACY 0x000000 +#define PRID_COMP_MIPS 0x010000 +#define PRID_IMP_LX4280 0xc200 +#define PRID_IMP_VGC 0x9000 + +/* + * Prototypes + */ +int ebi_initialize(void); +int ebi_init_nor_flash(void); +int ebi_init_onenand(void); +int ebi_init_smc911x(void); +u32 smc911x_reg_read(u32 addr); +void smc911x_reg_write(u32 addr, u32 data); +int top_set_pin(int pin, int func); +void vct_pin_mux_initialize(void); + +/* + * static inlines + */ +static inline void reg_write(u32 addr, u32 data) +{ + __raw_writel(data, addr + REG_GLOBAL_START_ADDR); +} + +static inline u32 reg_read(u32 addr) +{ + return __raw_readl(addr + REG_GLOBAL_START_ADDR); +} + +#endif /* _VCT_H */ diff --git a/board/micronas/vct/vcth/reg_dcgu.h b/board/micronas/vct/vcth/reg_dcgu.h new file mode 100644 index 0000000..c83ef27 --- /dev/null +++ b/board/micronas/vct/vcth/reg_dcgu.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define DCGU_BASE 0x00084000 +#define DCGU_EN_WDT_RESET_OFFS 0x00000064 +#define DCGU_EN_WDT_RESET(base) ((base) + DCGU_EN_WDT_RESET_OFFS) + +/* The magic value to write in order to activate the WDT */ +#define DCGU_MAGIC_WDT 0x1909 diff --git a/board/micronas/vct/vcth/reg_ebi.h b/board/micronas/vct/vcth/reg_ebi.h new file mode 100644 index 0000000..7a1e115 --- /dev/null +++ b/board/micronas/vct/vcth/reg_ebi.h @@ -0,0 +1,242 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * Copyright (C) 2006 Micronas GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _REG_EBI_PREMIUM_H_ +#define _REG_EBI_PREMIUM_H_ + +#define EBI_BASE 0x00000000 + +/* Relative offsets of the register adresses */ + +#define EBI_CPU_IO_ACCS_OFFS 0x00000000 +#define EBI_CPU_IO_ACCS(base) ((base) + EBI_CPU_IO_ACCS_OFFS) +#define EBI_IO_ACCS_DATA_OFFS 0x00000004 +#define EBI_IO_ACCS_DATA(base) ((base) + EBI_IO_ACCS_DATA_OFFS) +#define EBI_CTRL_OFFS 0x00000008 +#define EBI_CTRL(base) ((base) + EBI_CTRL_OFFS) +#define EBI_IRQ_MASK_OFFS 0x00000010 +#define EBI_IRQ_MASK(base) ((base) + EBI_IRQ_MASK_OFFS) +#define EBI_TAG1_SYS_ID_OFFS 0x00000030 +#define EBI_TAG1_SYS_ID(base) ((base) + EBI_TAG1_SYS_ID_OFFS) +#define EBI_TAG2_SYS_ID_OFFS 0x00000040 +#define EBI_TAG2_SYS_ID(base) ((base) + EBI_TAG2_SYS_ID_OFFS) +#define EBI_TAG3_SYS_ID_OFFS 0x00000050 +#define EBI_TAG3_SYS_ID(base) ((base) + EBI_TAG3_SYS_ID_OFFS) +#define EBI_TAG4_SYS_ID_OFFS 0x00000060 +#define EBI_TAG4_SYS_ID(base) ((base) + EBI_TAG4_SYS_ID_OFFS) +#define EBI_GEN_DMA_CTRL_OFFS 0x00000070 +#define EBI_GEN_DMA_CTRL(base) ((base) + EBI_GEN_DMA_CTRL_OFFS) +#define EBI_STATUS_OFFS 0x00000080 +#define EBI_STATUS(base) ((base) + EBI_STATUS_OFFS) +#define EBI_STATUS_DMA_CNT_OFFS 0x00000084 +#define EBI_STATUS_DMA_CNT(base) ((base) + EBI_STATUS_DMA_CNT_OFFS) +#define EBI_SIG_LEVEL_OFFS 0x00000088 +#define EBI_SIG_LEVEL(base) ((base) + EBI_SIG_LEVEL_OFFS) +#define EBI_CTRL_SIG_ACTLV_OFFS 0x0000008C +#define EBI_CTRL_SIG_ACTLV(base) ((base) + EBI_CTRL_SIG_ACTLV_OFFS) +#define EBI_EXT_ADDR_OFFS 0x000000A0 +#define EBI_EXT_ADDR(base) ((base) + EBI_EXT_ADDR_OFFS) +#define EBI_IRQ_STATUS_OFFS 0x000000B0 +#define EBI_IRQ_STATUS(base) ((base) + EBI_IRQ_STATUS_OFFS) +#define EBI_DEV1_DMA_EXT_ADDR_OFFS 0x00000100 +#define EBI_DEV1_DMA_EXT_ADDR(base) ((base) + EBI_DEV1_DMA_EXT_ADDR_OFFS) +#define EBI_DEV1_EXT_ACC_OFFS 0x00000104 +#define EBI_DEV1_EXT_ACC(base) ((base) + EBI_DEV1_EXT_ACC_OFFS) +#define EBI_DEV1_CONFIG1_OFFS 0x00000108 +#define EBI_DEV1_CONFIG1(base) ((base) + EBI_DEV1_CONFIG1_OFFS) +#define EBI_DEV1_CONFIG2_OFFS 0x0000010C +#define EBI_DEV1_CONFIG2(base) ((base) + EBI_DEV1_CONFIG2_OFFS) +#define EBI_DEV1_FIFO_CONFIG_OFFS 0x00000110 +#define EBI_DEV1_FIFO_CONFIG(base) ((base) + EBI_DEV1_FIFO_CONFIG_OFFS) +#define EBI_DEV1_FLASH_CONF_ST_OFFS 0x00000114 +#define EBI_DEV1_FLASH_CONF_ST(base) ((base) + EBI_DEV1_FLASH_CONF_ST_OFFS) +#define EBI_DEV1_DMA_CONFIG1_OFFS 0x00000118 +#define EBI_DEV1_DMA_CONFIG1(base) ((base) + EBI_DEV1_DMA_CONFIG1_OFFS) +#define EBI_DEV1_DMA_CONFIG2_OFFS 0x0000011C +#define EBI_DEV1_DMA_CONFIG2(base) ((base) + EBI_DEV1_DMA_CONFIG2_OFFS) +#define EBI_DEV1_TIM1_RD1_OFFS 0x00000124 +#define EBI_DEV1_TIM1_RD1(base) ((base) + EBI_DEV1_TIM1_RD1_OFFS) +#define EBI_DEV1_TIM1_RD2_OFFS 0x00000128 +#define EBI_DEV1_TIM1_RD2(base) ((base) + EBI_DEV1_TIM1_RD2_OFFS) +#define EBI_DEV1_TIM1_WR1_OFFS 0x0000012C +#define EBI_DEV1_TIM1_WR1(base) ((base) + EBI_DEV1_TIM1_WR1_OFFS) +#define EBI_DEV1_TIM1_WR2_OFFS 0x00000130 +#define EBI_DEV1_TIM1_WR2(base) ((base) + EBI_DEV1_TIM1_WR2_OFFS) +#define EBI_DEV1_TIM_EXT_OFFS 0x00000134 +#define EBI_DEV1_TIM_EXT(base) ((base) + EBI_DEV1_TIM_EXT_OFFS) +#define EBI_DEV1_TIM2_CFI_RD1_OFFS 0x00000138 +#define EBI_DEV1_TIM2_CFI_RD1(base) ((base) + EBI_DEV1_TIM2_CFI_RD1_OFFS) +#define EBI_DEV1_TIM2_CFI_RD2_OFFS 0x0000013C +#define EBI_DEV1_TIM2_CFI_RD2(base) ((base) + EBI_DEV1_TIM2_CFI_RD2_OFFS) +#define EBI_DEV1_TIM3_DMA1_OFFS 0x00000140 +#define EBI_DEV1_TIM3_DMA1(base) ((base) + EBI_DEV1_TIM3_DMA1_OFFS) +#define EBI_DEV1_TIM3_DMA2_OFFS 0x00000144 +#define EBI_DEV1_TIM3_DMA2(base) ((base) + EBI_DEV1_TIM3_DMA2_OFFS) +#define EBI_DEV1_ACK_RM_CNT_OFFS 0x00000150 +#define EBI_DEV1_ACK_RM_CNT(base) ((base) + EBI_DEV1_ACK_RM_CNT_OFFS) +#define EBI_DEV2_DMA_EXT_ADDR_OFFS 0x00000200 +#define EBI_DEV2_DMA_EXT_ADDR(base) ((base) + EBI_DEV2_DMA_EXT_ADDR_OFFS) +#define EBI_DEV2_EXT_ACC_OFFS 0x00000204 +#define EBI_DEV2_EXT_ACC(base) ((base) + EBI_DEV2_EXT_ACC_OFFS) +#define EBI_DEV2_CONFIG1_OFFS 0x00000208 +#define EBI_DEV2_CONFIG1(base) ((base) + EBI_DEV2_CONFIG1_OFFS) +#define EBI_DEV2_CONFIG2_OFFS 0x0000020C +#define EBI_DEV2_CONFIG2(base) ((base) + EBI_DEV2_CONFIG2_OFFS) +#define EBI_DEV2_FIFO_CONFIG_OFFS 0x00000210 +#define EBI_DEV2_FIFO_CONFIG(base) ((base) + EBI_DEV2_FIFO_CONFIG_OFFS) +#define EBI_DEV2_FLASH_CONF_ST_OFFS 0x00000214 +#define EBI_DEV2_FLASH_CONF_ST(base) ((base) + EBI_DEV2_FLASH_CONF_ST_OFFS) +#define EBI_DEV2_DMA_CONFIG1_OFFS 0x00000218 +#define EBI_DEV2_DMA_CONFIG1(base) ((base) + EBI_DEV2_DMA_CONFIG1_OFFS) +#define EBI_DEV2_DMA_CONFIG2_OFFS 0x0000021C +#define EBI_DEV2_DMA_CONFIG2(base) ((base) + EBI_DEV2_DMA_CONFIG2_OFFS) +#define EBI_DEV2_TIM1_RD1_OFFS 0x00000224 +#define EBI_DEV2_TIM1_RD1(base) ((base) + EBI_DEV2_TIM1_RD1_OFFS) +#define EBI_DEV2_TIM1_RD2_OFFS 0x00000228 +#define EBI_DEV2_TIM1_RD2(base) ((base) + EBI_DEV2_TIM1_RD2_OFFS) +#define EBI_DEV2_TIM1_WR1_OFFS 0x0000022C +#define EBI_DEV2_TIM1_WR1(base) ((base) + EBI_DEV2_TIM1_WR1_OFFS) +#define EBI_DEV2_TIM1_WR2_OFFS 0x00000230 +#define EBI_DEV2_TIM1_WR2(base) ((base) + EBI_DEV2_TIM1_WR2_OFFS) +#define EBI_DEV2_TIM_EXT_OFFS 0x00000234 +#define EBI_DEV2_TIM_EXT(base) ((base) + EBI_DEV2_TIM_EXT_OFFS) +#define EBI_DEV2_TIM2_CFI_RD1_OFFS 0x00000238 +#define EBI_DEV2_TIM2_CFI_RD1(base) ((base) + EBI_DEV2_TIM2_CFI_RD1_OFFS) +#define EBI_DEV2_TIM2_CFI_RD2_OFFS 0x0000023C +#define EBI_DEV2_TIM2_CFI_RD2(base) ((base) + EBI_DEV2_TIM2_CFI_RD2_OFFS) +#define EBI_DEV2_TIM3_DMA1_OFFS 0x00000240 +#define EBI_DEV2_TIM3_DMA1(base) ((base) + EBI_DEV2_TIM3_DMA1_OFFS) +#define EBI_DEV2_TIM3_DMA2_OFFS 0x00000244 +#define EBI_DEV2_TIM3_DMA2(base) ((base) + EBI_DEV2_TIM3_DMA2_OFFS) +#define EBI_DEV2_ACK_RM_CNT_OFFS 0x00000250 +#define EBI_DEV2_ACK_RM_CNT(base) ((base) + EBI_DEV2_ACK_RM_CNT_OFFS) +#define EBI_DEV3_DMA_EXT_ADDR_OFFS 0x00000300 +#define EBI_DEV3_DMA_EXT_ADDR(base) ((base) + EBI_DEV3_DMA_EXT_ADDR_OFFS) +#define EBI_DEV3_EXT_ACC_OFFS 0x00000304 +#define EBI_DEV3_EXT_ACC(base) ((base) + EBI_DEV3_EXT_ACC_OFFS) +#define EBI_DEV3_CONFIG1_OFFS 0x00000308 +#define EBI_DEV3_CONFIG1(base) ((base) + EBI_DEV3_CONFIG1_OFFS) +#define EBI_DEV3_CONFIG2_OFFS 0x0000030C +#define EBI_DEV3_CONFIG2(base) ((base) + EBI_DEV3_CONFIG2_OFFS) +#define EBI_DEV3_FIFO_CONFIG_OFFS 0x00000310 +#define EBI_DEV3_FIFO_CONFIG(base) ((base) + EBI_DEV3_FIFO_CONFIG_OFFS) +#define EBI_DEV3_FLASH_CONF_ST_OFFS 0x00000314 +#define EBI_DEV3_FLASH_CONF_ST(base) ((base) + EBI_DEV3_FLASH_CONF_ST_OFFS) +#define EBI_DEV3_DMA_CONFIG1_OFFS 0x00000318 +#define EBI_DEV3_DMA_CONFIG1(base) ((base) + EBI_DEV3_DMA_CONFIG1_OFFS) +#define EBI_DEV3_DMA_CONFIG2_OFFS 0x0000031C +#define EBI_DEV3_DMA_CONFIG2(base) ((base) + EBI_DEV3_DMA_CONFIG2_OFFS) +#define EBI_DEV3_TIM1_RD1_OFFS 0x00000324 +#define EBI_DEV3_TIM1_RD1(base) ((base) + EBI_DEV3_TIM1_RD1_OFFS) +#define EBI_DEV3_TIM1_RD2_OFFS 0x00000328 +#define EBI_DEV3_TIM1_RD2(base) ((base) + EBI_DEV3_TIM1_RD2_OFFS) +#define EBI_DEV3_TIM1_WR1_OFFS 0x0000032C +#define EBI_DEV3_TIM1_WR1(base) ((base) + EBI_DEV3_TIM1_WR1_OFFS) +#define EBI_DEV3_TIM1_WR2_OFFS 0x00000330 +#define EBI_DEV3_TIM1_WR2(base) ((base) + EBI_DEV3_TIM1_WR2_OFFS) +#define EBI_DEV3_TIM_EXT_OFFS 0x00000334 +#define EBI_DEV3_TIM_EXT(base) ((base) + EBI_DEV3_TIM_EXT_OFFS) +#define EBI_DEV3_TIM2_CFI_RD1_OFFS 0x00000338 +#define EBI_DEV3_TIM2_CFI_RD1(base) ((base) + EBI_DEV3_TIM2_CFI_RD1_OFFS) +#define EBI_DEV3_TIM2_CFI_RD2_OFFS 0x0000033C +#define EBI_DEV3_TIM2_CFI_RD2(base) ((base) + EBI_DEV3_TIM2_CFI_RD2_OFFS) +#define EBI_DEV3_TIM3_DMA1_OFFS 0x00000340 +#define EBI_DEV3_TIM3_DMA1(base) ((base) + EBI_DEV3_TIM3_DMA1_OFFS) +#define EBI_DEV3_TIM3_DMA2_OFFS 0x00000344 +#define EBI_DEV3_TIM3_DMA2(base) ((base) + EBI_DEV3_TIM3_DMA2_OFFS) +#define EBI_DEV3_ACK_RM_CNT_OFFS 0x00000350 +#define EBI_DEV3_ACK_RM_CNT(base) ((base) + EBI_DEV3_ACK_RM_CNT_OFFS) +#define EBI_DEV4_DMA_EXT_ADDR_OFFS 0x00000400 +#define EBI_DEV4_DMA_EXT_ADDR(base) ((base) + EBI_DEV4_DMA_EXT_ADDR_OFFS) +#define EBI_DEV4_EXT_ACC_OFFS 0x00000404 +#define EBI_DEV4_EXT_ACC(base) ((base) + EBI_DEV4_EXT_ACC_OFFS) +#define EBI_DEV4_CONFIG1_OFFS 0x00000408 +#define EBI_DEV4_CONFIG1(base) ((base) + EBI_DEV4_CONFIG1_OFFS) +#define EBI_DEV4_CONFIG2_OFFS 0x0000040C +#define EBI_DEV4_CONFIG2(base) ((base) + EBI_DEV4_CONFIG2_OFFS) +#define EBI_DEV4_FIFO_CONFIG_OFFS 0x00000410 +#define EBI_DEV4_FIFO_CONFIG(base) ((base) + EBI_DEV4_FIFO_CONFIG_OFFS) +#define EBI_DEV4_FLASH_CONF_ST_OFFS 0x00000414 +#define EBI_DEV4_FLASH_CONF_ST(base) ((base) + EBI_DEV4_FLASH_CONF_ST_OFFS) +#define EBI_DEV4_DMA_CONFIG1_OFFS 0x00000418 +#define EBI_DEV4_DMA_CONFIG1(base) ((base) + EBI_DEV4_DMA_CONFIG1_OFFS) +#define EBI_DEV4_DMA_CONFIG2_OFFS 0x0000041C +#define EBI_DEV4_DMA_CONFIG2(base) ((base) + EBI_DEV4_DMA_CONFIG2_OFFS) +#define EBI_DEV4_TIM1_RD1_OFFS 0x00000424 +#define EBI_DEV4_TIM1_RD1(base) ((base) + EBI_DEV4_TIM1_RD1_OFFS) +#define EBI_DEV4_TIM1_RD2_OFFS 0x00000428 +#define EBI_DEV4_TIM1_RD2(base) ((base) + EBI_DEV4_TIM1_RD2_OFFS) +#define EBI_DEV4_TIM1_WR1_OFFS 0x0000042C +#define EBI_DEV4_TIM1_WR1(base) ((base) + EBI_DEV4_TIM1_WR1_OFFS) +#define EBI_DEV4_TIM1_WR2_OFFS 0x00000430 +#define EBI_DEV4_TIM1_WR2(base) ((base) + EBI_DEV4_TIM1_WR2_OFFS) +#define EBI_DEV4_TIM_EXT_OFFS 0x00000434 +#define EBI_DEV4_TIM_EXT(base) ((base) + EBI_DEV4_TIM_EXT_OFFS) +#define EBI_DEV4_TIM2_CFI_RD1_OFFS 0x00000438 +#define EBI_DEV4_TIM2_CFI_RD1(base) ((base) + EBI_DEV4_TIM2_CFI_RD1_OFFS) +#define EBI_DEV4_TIM2_CFI_RD2_OFFS 0x0000043C +#define EBI_DEV4_TIM2_CFI_RD2(base) ((base) + EBI_DEV4_TIM2_CFI_RD2_OFFS) +#define EBI_DEV4_TIM3_DMA1_OFFS 0x00000440 +#define EBI_DEV4_TIM3_DMA1(base) ((base) + EBI_DEV4_TIM3_DMA1_OFFS) +#define EBI_DEV4_TIM3_DMA2_OFFS 0x00000444 +#define EBI_DEV4_TIM3_DMA2(base) ((base) + EBI_DEV4_TIM3_DMA2_OFFS) +#define EBI_DEV4_ACK_RM_CNT_OFFS 0x00000450 +#define EBI_DEV4_ACK_RM_CNT(base) ((base) + EBI_DEV4_ACK_RM_CNT_OFFS) +#define EBI_CNT_FL_PROGR_OFFS 0x00000904 +#define EBI_CNT_FL_PROGR(base) ((base) + EBI_CNT_FL_PROGR_OFFS) +#define EBI_CNT_EXT_PAGE_SZ_OFFS 0x0000090C +#define EBI_CNT_EXT_PAGE_SZ(base) ((base) + EBI_CNT_EXT_PAGE_SZ_OFFS) +#define EBI_CNT_WAIT_RDY_OFFS 0x00000914 +#define EBI_CNT_WAIT_RDY(base) ((base) + EBI_CNT_WAIT_RDY_OFFS) +#define EBI_CNT_ACK_OFFS 0x00000918 +#define EBI_CNT_ACK(base) ((base) + EBI_CNT_ACK_OFFS) +#define EBI_GENIO1_CONFIG1_OFFS 0x00000A00 +#define EBI_GENIO1_CONFIG1(base) ((base) + EBI_GENIO1_CONFIG1_OFFS) +#define EBI_GENIO1_CONFIG2_OFFS 0x00000A04 +#define EBI_GENIO1_CONFIG2(base) ((base) + EBI_GENIO1_CONFIG2_OFFS) +#define EBI_GENIO1_CONFIG3_OFFS 0x00000A08 +#define EBI_GENIO1_CONFIG3(base) ((base) + EBI_GENIO1_CONFIG3_OFFS) +#define EBI_GENIO2_CONFIG1_OFFS 0x00000A10 +#define EBI_GENIO2_CONFIG1(base) ((base) + EBI_GENIO2_CONFIG1_OFFS) +#define EBI_GENIO2_CONFIG2_OFFS 0x00000A14 +#define EBI_GENIO2_CONFIG2(base) ((base) + EBI_GENIO2_CONFIG2_OFFS) +#define EBI_GENIO2_CONFIG3_OFFS 0x00000A18 +#define EBI_GENIO2_CONFIG3(base) ((base) + EBI_GENIO2_CONFIG3_OFFS) +#define EBI_GENIO3_CONFIG1_OFFS 0x00000A20 +#define EBI_GENIO3_CONFIG1(base) ((base) + EBI_GENIO3_CONFIG1_OFFS) +#define EBI_GENIO3_CONFIG2_OFFS 0x00000A24 +#define EBI_GENIO3_CONFIG2(base) ((base) + EBI_GENIO3_CONFIG2_OFFS) +#define EBI_GENIO3_CONFIG3_OFFS 0x00000A28 +#define EBI_GENIO3_CONFIG3(base) ((base) + EBI_GENIO3_CONFIG3_OFFS) +#define EBI_GENIO4_CONFIG1_OFFS 0x00000A30 +#define EBI_GENIO4_CONFIG1(base) ((base) + EBI_GENIO4_CONFIG1_OFFS) +#define EBI_GENIO4_CONFIG2_OFFS 0x00000A34 +#define EBI_GENIO4_CONFIG2(base) ((base) + EBI_GENIO4_CONFIG2_OFFS) +#define EBI_GENIO4_CONFIG3_OFFS 0x00000A38 +#define EBI_GENIO4_CONFIG3(base) ((base) + EBI_GENIO4_CONFIG3_OFFS) +#define EBI_GENIO5_CONFIG1_OFFS 0x00000A40 +#define EBI_GENIO5_CONFIG1(base) ((base) + EBI_GENIO5_CONFIG1_OFFS) +#define EBI_GENIO5_CONFIG2_OFFS 0x00000A44 +#define EBI_GENIO5_CONFIG2(base) ((base) + EBI_GENIO5_CONFIG2_OFFS) +#define EBI_GENIO5_CONFIG3_OFFS 0x00000A48 +#define EBI_GENIO5_CONFIG3(base) ((base) + EBI_GENIO5_CONFIG3_OFFS) + +#endif diff --git a/board/micronas/vct/vcth/reg_fwsram.h b/board/micronas/vct/vcth/reg_fwsram.h new file mode 100644 index 0000000..19afb6b --- /dev/null +++ b/board/micronas/vct/vcth/reg_fwsram.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * Copyright (C) 2006 Micronas GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Premium & Platinum register addresses/definitions seem to be + * identical, so we only need to use one file for both platforms. + */ + +#ifndef _REG_FWSRAM_H_ +#define _REG_FWSRAM_H_ + +#define FWSRAM_BASE 0x00030000 + +/* Relative offsets of the register adresses */ + +#define FWSRAM_SR_ADDR_OFFSET_OFFS 0x00002000 +#define FWSRAM_SR_ADDR_OFFSET(base) ((base) + FWSRAM_SR_ADDR_OFFSET_OFFS) +#define FWSRAM_TOP_BOOT_LOG_OFFS 0x00002004 +#define FWSRAM_TOP_BOOT_LOG(base) ((base) + FWSRAM_TOP_BOOT_LOG_OFFS) +#define FWSRAM_TOP_ROM_KBIST_OFFS 0x00002008 +#define FWSRAM_TOP_ROM_KBIST(base) ((base) + FWSRAM_TOP_ROM_KBIST_OFFS) +#define FWSRAM_TOP_CID1_H_OFFS 0x0000200C +#define FWSRAM_TOP_CID1_H(base) ((base) + FWSRAM_TOP_CID1_H_OFFS) +#define FWSRAM_TOP_CID1_L_OFFS 0x00002010 +#define FWSRAM_TOP_CID1_L(base) ((base) + FWSRAM_TOP_CID1_L_OFFS) +#define FWSRAM_TOP_CID2_H_OFFS 0x00002014 +#define FWSRAM_TOP_CID2_H(base) ((base) + FWSRAM_TOP_CID2_H_OFFS) +#define FWSRAM_TOP_CID2_L_OFFS 0x00002018 +#define FWSRAM_TOP_CID2_L(base) ((base) + FWSRAM_TOP_CID2_L_OFFS) +#define FWSRAM_TOP_TDO_CFG_OFFS 0x0000203C +#define FWSRAM_TOP_TDO_CFG(base) ((base) + FWSRAM_TOP_TDO_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_0_CFG_OFFS 0x00002040 +#define FWSRAM_TOP_GPIO2_0_CFG(base) ((base) + FWSRAM_TOP_GPIO2_0_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_1_CFG_OFFS 0x00002044 +#define FWSRAM_TOP_GPIO2_1_CFG(base) ((base) + FWSRAM_TOP_GPIO2_1_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_2_CFG_OFFS 0x00002048 +#define FWSRAM_TOP_GPIO2_2_CFG(base) ((base) + FWSRAM_TOP_GPIO2_2_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_3_CFG_OFFS 0x0000204C +#define FWSRAM_TOP_GPIO2_3_CFG(base) ((base) + FWSRAM_TOP_GPIO2_3_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_4_CFG_OFFS 0x00002050 +#define FWSRAM_TOP_GPIO2_4_CFG(base) ((base) + FWSRAM_TOP_GPIO2_4_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_5_CFG_OFFS 0x00002054 +#define FWSRAM_TOP_GPIO2_5_CFG(base) ((base) + FWSRAM_TOP_GPIO2_5_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_6_CFG_OFFS 0x00002058 +#define FWSRAM_TOP_GPIO2_6_CFG(base) ((base) + FWSRAM_TOP_GPIO2_6_CFG_OFFS) +#define FWSRAM_TOP_GPIO2_7_CFG_OFFS 0x0000205C +#define FWSRAM_TOP_GPIO2_7_CFG(base) ((base) + FWSRAM_TOP_GPIO2_7_CFG_OFFS) +#define FWSRAM_TOP_SCL_CFG_OFFS 0x00002060 +#define FWSRAM_TOP_SCL_CFG(base) ((base) + FWSRAM_TOP_SCL_CFG_OFFS) +#define FWSRAM_TOP_SDA_CFG_OFFS 0x00002064 +#define FWSRAM_TOP_SDA_CFG(base) ((base) + FWSRAM_TOP_SDA_CFG_OFFS) +#define FWSRAM_NO_MCM_FLASH_OFFS 0x00002068 +#define FWSRAM_NO_MCM_FLASH(base) ((base) + FWSRAM_NO_MCM_FLASH_OFFS) + +#endif diff --git a/board/micronas/vct/vcth/reg_gpio.h b/board/micronas/vct/vcth/reg_gpio.h new file mode 100644 index 0000000..7ada9c9 --- /dev/null +++ b/board/micronas/vct/vcth/reg_gpio.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define GPIO1_BASE 0x00088000 +#define GPIO2_BASE 0x0008c000 + +/* Instances */ +#define GPIO_INSTANCES 2 + +/* Relative offsets of the register adresses */ +#define GPIO_SWPORTA_DR_OFFS 0x00000000 +#define GPIO_SWPORTA_DR(base) ((base) + GPIO_SWPORTA_DR_OFFS) +#define GPIO_SWPORTA_DDR_OFFS 0x00000004 +#define GPIO_SWPORTA_DDR(base) ((base) + GPIO_SWPORTA_DDR_OFFS) +#define GPIO_EXT_PORTA_OFFS 0x00000050 +#define GPIO_EXT_PORTA(base) ((base) + GPIO_EXT_PORTA_OFFS) diff --git a/board/micronas/vct/vcth/reg_wdt.h b/board/micronas/vct/vcth/reg_wdt.h new file mode 100644 index 0000000..a9b4bf0 --- /dev/null +++ b/board/micronas/vct/vcth/reg_wdt.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define WDT_BASE 0x000b0000 +#define WDT_CR_OFFS 0x00000000 +#define WDT_CR(base) ((base) + WDT_CR_OFFS) +#define WDT_TORR_OFFS 0x00000004 +#define WDT_TORR(base) ((base) + WDT_TORR_OFFS) diff --git a/board/micronas/vct/vcth2/reg_ebi.h b/board/micronas/vct/vcth2/reg_ebi.h new file mode 100644 index 0000000..37f0711 --- /dev/null +++ b/board/micronas/vct/vcth2/reg_ebi.h @@ -0,0 +1,290 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * Copyright (C) 2006 Micronas GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _REG_EBI_PREMIUM_H_ +#define _REG_EBI_PREMIUM_H_ + +#define EBI_BASE 0x00000000 + +/* Relative offsets of the register adresses */ + +#define EBI_CPU_IO_ACCS_OFFS 0x00000000 +#define EBI_CPU_IO_ACCS(base) ((base) + EBI_CPU_IO_ACCS_OFFS) +#define EBI_IO_ACCS_DATA_OFFS 0x00000004 +#define EBI_IO_ACCS_DATA(base) ((base) + EBI_IO_ACCS_DATA_OFFS) +#define EBI_CPU_IO_ACCS2_OFFS 0x00000008 +#define EBI_CPU_IO_ACCS2(base) ((base) + EBI_CPU_IO_ACCS2_OFFS) +#define EBI_IO_ACCS2_DATA_OFFS 0x0000000C +#define EBI_IO_ACCS2_DATA(base) ((base) + EBI_IO_ACCS2_DATA_OFFS) +#define EBI_CTRL_OFFS 0x00000010 +#define EBI_CTRL(base) ((base) + EBI_CTRL_OFFS) +#define EBI_IRQ_MASK_OFFS 0x00000018 +#define EBI_IRQ_MASK(base) ((base) + EBI_IRQ_MASK_OFFS) +#define EBI_IRQ_MASK2_OFFS 0x0000001C +#define EBI_IRQ_MASK2(base) ((base) + EBI_IRQ_MASK2_OFFS) +#define EBI_TAG1_SYS_ID_OFFS 0x00000030 +#define EBI_TAG1_SYS_ID(base) ((base) + EBI_TAG1_SYS_ID_OFFS) +#define EBI_TAG2_SYS_ID_OFFS 0x00000040 +#define EBI_TAG2_SYS_ID(base) ((base) + EBI_TAG2_SYS_ID_OFFS) +#define EBI_TAG3_SYS_ID_OFFS 0x00000050 +#define EBI_TAG3_SYS_ID(base) ((base) + EBI_TAG3_SYS_ID_OFFS) +#define EBI_TAG4_SYS_ID_OFFS 0x00000060 +#define EBI_TAG4_SYS_ID(base) ((base) + EBI_TAG4_SYS_ID_OFFS) +#define EBI_GEN_DMA_CTRL_OFFS 0x00000070 +#define EBI_GEN_DMA_CTRL(base) ((base) + EBI_GEN_DMA_CTRL_OFFS) +#define EBI_STATUS_OFFS 0x00000080 +#define EBI_STATUS(base) ((base) + EBI_STATUS_OFFS) +#define EBI_STATUS_DMA_CNT_OFFS 0x00000084 +#define EBI_STATUS_DMA_CNT(base) ((base) + EBI_STATUS_DMA_CNT_OFFS) +#define EBI_SIG_LEVEL_OFFS 0x00000088 +#define EBI_SIG_LEVEL(base) ((base) + EBI_SIG_LEVEL_OFFS) +#define EBI_CTRL_SIG_ACTLV_OFFS 0x0000008C +#define EBI_CTRL_SIG_ACTLV(base) ((base) + EBI_CTRL_SIG_ACTLV_OFFS) +#define EBI_CRC_GEN_OFFS 0x00000090 +#define EBI_CRC_GEN(base) ((base) + EBI_CRC_GEN_OFFS) +#define EBI_EXT_ADDR_OFFS 0x000000A0 +#define EBI_EXT_ADDR(base) ((base) + EBI_EXT_ADDR_OFFS) +#define EBI_IRQ_STATUS_OFFS 0x000000B0 +#define EBI_IRQ_STATUS(base) ((base) + EBI_IRQ_STATUS_OFFS) +#define EBI_IRQ_STATUS2_OFFS 0x000000B4 +#define EBI_IRQ_STATUS2(base) ((base) + EBI_IRQ_STATUS2_OFFS) +#define EBI_EXT_MASTER_SRAM_HIGH_OFFS 0x000000C0 +#define EBI_EXT_MASTER_SRAM_HIGH(base) ((base) + EBI_EXT_MASTER_SRAM_HIGH_OFFS) +#define EBI_EXT_MASTER_SRAM_LOW_OFFS 0x000000C4 +#define EBI_EXT_MASTER_SRAM_LOW(base) ((base) + EBI_EXT_MASTER_SRAM_LOW_OFFS) +#define EBI_ECC0_OFFS 0x000000D0 +#define EBI_ECC0(base) ((base) + EBI_ECC0_OFFS) +#define EBI_ECC1_OFFS 0x000000D4 +#define EBI_ECC1(base) ((base) + EBI_ECC1_OFFS) +#define EBI_ECC2_OFFS 0x000000D8 +#define EBI_ECC2(base) ((base) + EBI_ECC2_OFFS) +#define EBI_ECC3_OFFS 0x000000DC +#define EBI_ECC3(base) ((base) + EBI_ECC3_OFFS) +#define EBI_DEV1_DMA_EXT_ADDR_OFFS 0x00000100 +#define EBI_DEV1_DMA_EXT_ADDR(base) ((base) + EBI_DEV1_DMA_EXT_ADDR_OFFS) +#define EBI_DEV1_EXT_ACC_OFFS 0x00000104 +#define EBI_DEV1_EXT_ACC(base) ((base) + EBI_DEV1_EXT_ACC_OFFS) +#define EBI_DEV1_CONFIG1_OFFS 0x00000108 +#define EBI_DEV1_CONFIG1(base) ((base) + EBI_DEV1_CONFIG1_OFFS) +#define EBI_DEV1_CONFIG2_OFFS 0x0000010C +#define EBI_DEV1_CONFIG2(base) ((base) + EBI_DEV1_CONFIG2_OFFS) +#define EBI_DEV1_FIFO_CONFIG_OFFS 0x00000110 +#define EBI_DEV1_FIFO_CONFIG(base) ((base) + EBI_DEV1_FIFO_CONFIG_OFFS) +#define EBI_DEV1_FLASH_CONF_ST_OFFS 0x00000114 +#define EBI_DEV1_FLASH_CONF_ST(base) ((base) + EBI_DEV1_FLASH_CONF_ST_OFFS) +#define EBI_DEV1_DMA_CONFIG1_OFFS 0x00000118 +#define EBI_DEV1_DMA_CONFIG1(base) ((base) + EBI_DEV1_DMA_CONFIG1_OFFS) +#define EBI_DEV1_DMA_CONFIG2_OFFS 0x0000011C +#define EBI_DEV1_DMA_CONFIG2(base) ((base) + EBI_DEV1_DMA_CONFIG2_OFFS) +#define EBI_DEV1_DMA_ECC_CTRL_OFFS 0x00000120 +#define EBI_DEV1_DMA_ECC_CTRL(base) ((base) + EBI_DEV1_DMA_ECC_CTRL_OFFS) +#define EBI_DEV1_TIM1_RD1_OFFS 0x00000124 +#define EBI_DEV1_TIM1_RD1(base) ((base) + EBI_DEV1_TIM1_RD1_OFFS) +#define EBI_DEV1_TIM1_RD2_OFFS 0x00000128 +#define EBI_DEV1_TIM1_RD2(base) ((base) + EBI_DEV1_TIM1_RD2_OFFS) +#define EBI_DEV1_TIM1_WR1_OFFS 0x0000012C +#define EBI_DEV1_TIM1_WR1(base) ((base) + EBI_DEV1_TIM1_WR1_OFFS) +#define EBI_DEV1_TIM1_WR2_OFFS 0x00000130 +#define EBI_DEV1_TIM1_WR2(base) ((base) + EBI_DEV1_TIM1_WR2_OFFS) +#define EBI_DEV1_TIM_EXT_OFFS 0x00000134 +#define EBI_DEV1_TIM_EXT(base) ((base) + EBI_DEV1_TIM_EXT_OFFS) +#define EBI_DEV1_TIM2_CFI_RD1_OFFS 0x00000138 +#define EBI_DEV1_TIM2_CFI_RD1(base) ((base) + EBI_DEV1_TIM2_CFI_RD1_OFFS) +#define EBI_DEV1_TIM2_CFI_RD2_OFFS 0x0000013C +#define EBI_DEV1_TIM2_CFI_RD2(base) ((base) + EBI_DEV1_TIM2_CFI_RD2_OFFS) +#define EBI_DEV1_TIM3_DMA1_OFFS 0x00000140 +#define EBI_DEV1_TIM3_DMA1(base) ((base) + EBI_DEV1_TIM3_DMA1_OFFS) +#define EBI_DEV1_TIM3_DMA2_OFFS 0x00000144 +#define EBI_DEV1_TIM3_DMA2(base) ((base) + EBI_DEV1_TIM3_DMA2_OFFS) +#define EBI_DEV1_TIM4_UDMA1_OFFS 0x00000148 +#define EBI_DEV1_TIM4_UDMA1(base) ((base) + EBI_DEV1_TIM4_UDMA1_OFFS) +#define EBI_DEV1_TIM4_UDMA2_OFFS 0x0000014C +#define EBI_DEV1_TIM4_UDMA2(base) ((base) + EBI_DEV1_TIM4_UDMA2_OFFS) +#define EBI_DEV1_ACK_RM_CNT_OFFS 0x00000150 +#define EBI_DEV1_ACK_RM_CNT(base) ((base) + EBI_DEV1_ACK_RM_CNT_OFFS) +#define EBI_DEV2_DMA_EXT_ADDR_OFFS 0x00000200 +#define EBI_DEV2_DMA_EXT_ADDR(base) ((base) + EBI_DEV2_DMA_EXT_ADDR_OFFS) +#define EBI_DEV2_EXT_ACC_OFFS 0x00000204 +#define EBI_DEV2_EXT_ACC(base) ((base) + EBI_DEV2_EXT_ACC_OFFS) +#define EBI_DEV2_CONFIG1_OFFS 0x00000208 +#define EBI_DEV2_CONFIG1(base) ((base) + EBI_DEV2_CONFIG1_OFFS) +#define EBI_DEV2_CONFIG2_OFFS 0x0000020C +#define EBI_DEV2_CONFIG2(base) ((base) + EBI_DEV2_CONFIG2_OFFS) +#define EBI_DEV2_FIFO_CONFIG_OFFS 0x00000210 +#define EBI_DEV2_FIFO_CONFIG(base) ((base) + EBI_DEV2_FIFO_CONFIG_OFFS) +#define EBI_DEV2_FLASH_CONF_ST_OFFS 0x00000214 +#define EBI_DEV2_FLASH_CONF_ST(base) ((base) + EBI_DEV2_FLASH_CONF_ST_OFFS) +#define EBI_DEV2_DMA_CONFIG1_OFFS 0x00000218 +#define EBI_DEV2_DMA_CONFIG1(base) ((base) + EBI_DEV2_DMA_CONFIG1_OFFS) +#define EBI_DEV2_DMA_CONFIG2_OFFS 0x0000021C +#define EBI_DEV2_DMA_CONFIG2(base) ((base) + EBI_DEV2_DMA_CONFIG2_OFFS) +#define EBI_DEV2_DMA_ECC_CTRL_OFFS 0x00000220 +#define EBI_DEV2_DMA_ECC_CTRL(base) ((base) + EBI_DEV2_DMA_ECC_CTRL_OFFS) +#define EBI_DEV2_TIM1_RD1_OFFS 0x00000224 +#define EBI_DEV2_TIM1_RD1(base) ((base) + EBI_DEV2_TIM1_RD1_OFFS) +#define EBI_DEV2_TIM1_RD2_OFFS 0x00000228 +#define EBI_DEV2_TIM1_RD2(base) ((base) + EBI_DEV2_TIM1_RD2_OFFS) +#define EBI_DEV2_TIM1_WR1_OFFS 0x0000022C +#define EBI_DEV2_TIM1_WR1(base) ((base) + EBI_DEV2_TIM1_WR1_OFFS) +#define EBI_DEV2_TIM1_WR2_OFFS 0x00000230 +#define EBI_DEV2_TIM1_WR2(base) ((base) + EBI_DEV2_TIM1_WR2_OFFS) +#define EBI_DEV2_TIM_EXT_OFFS 0x00000234 +#define EBI_DEV2_TIM_EXT(base) ((base) + EBI_DEV2_TIM_EXT_OFFS) +#define EBI_DEV2_TIM2_CFI_RD1_OFFS 0x00000238 +#define EBI_DEV2_TIM2_CFI_RD1(base) ((base) + EBI_DEV2_TIM2_CFI_RD1_OFFS) +#define EBI_DEV2_TIM2_CFI_RD2_OFFS 0x0000023C +#define EBI_DEV2_TIM2_CFI_RD2(base) ((base) + EBI_DEV2_TIM2_CFI_RD2_OFFS) +#define EBI_DEV2_TIM3_DMA1_OFFS 0x00000240 +#define EBI_DEV2_TIM3_DMA1(base) ((base) + EBI_DEV2_TIM3_DMA1_OFFS) +#define EBI_DEV2_TIM3_DMA2_OFFS 0x00000244 +#define EBI_DEV2_TIM3_DMA2(base) ((base) + EBI_DEV2_TIM3_DMA2_OFFS) +#define EBI_DEV2_TIM4_UDMA1_OFFS 0x00000248 +#define EBI_DEV2_TIM4_UDMA1(base) ((base) + EBI_DEV2_TIM4_UDMA1_OFFS) +#define EBI_DEV2_TIM4_UDMA2_OFFS 0x0000024C +#define EBI_DEV2_TIM4_UDMA2(base) ((base) + EBI_DEV2_TIM4_UDMA2_OFFS) +#define EBI_DEV2_ACK_RM_CNT_OFFS 0x00000250 +#define EBI_DEV2_ACK_RM_CNT(base) ((base) + EBI_DEV2_ACK_RM_CNT_OFFS) +#define EBI_DEV3_DMA_EXT_ADDR_OFFS 0x00000300 +#define EBI_DEV3_DMA_EXT_ADDR(base) ((base) + EBI_DEV3_DMA_EXT_ADDR_OFFS) +#define EBI_DEV3_EXT_ACC_OFFS 0x00000304 +#define EBI_DEV3_EXT_ACC(base) ((base) + EBI_DEV3_EXT_ACC_OFFS) +#define EBI_DEV3_CONFIG1_OFFS 0x00000308 +#define EBI_DEV3_CONFIG1(base) ((base) + EBI_DEV3_CONFIG1_OFFS) +#define EBI_DEV3_CONFIG2_OFFS 0x0000030C +#define EBI_DEV3_CONFIG2(base) ((base) + EBI_DEV3_CONFIG2_OFFS) +#define EBI_DEV3_FIFO_CONFIG_OFFS 0x00000310 +#define EBI_DEV3_FIFO_CONFIG(base) ((base) + EBI_DEV3_FIFO_CONFIG_OFFS) +#define EBI_DEV3_FLASH_CONF_ST_OFFS 0x00000314 +#define EBI_DEV3_FLASH_CONF_ST(base) ((base) + EBI_DEV3_FLASH_CONF_ST_OFFS) +#define EBI_DEV3_DMA_CONFIG1_OFFS 0x00000318 +#define EBI_DEV3_DMA_CONFIG1(base) ((base) + EBI_DEV3_DMA_CONFIG1_OFFS) +#define EBI_DEV3_DMA_CONFIG2_OFFS 0x0000031C +#define EBI_DEV3_DMA_CONFIG2(base) ((base) + EBI_DEV3_DMA_CONFIG2_OFFS) +#define EBI_DEV3_DMA_ECC_CTRL_OFFS 0x00000320 +#define EBI_DEV3_DMA_ECC_CTRL(base) ((base) + EBI_DEV3_DMA_ECC_CTRL_OFFS) +#define EBI_DEV3_TIM1_RD1_OFFS 0x00000324 +#define EBI_DEV3_TIM1_RD1(base) ((base) + EBI_DEV3_TIM1_RD1_OFFS) +#define EBI_DEV3_TIM1_RD2_OFFS 0x00000328 +#define EBI_DEV3_TIM1_RD2(base) ((base) + EBI_DEV3_TIM1_RD2_OFFS) +#define EBI_DEV3_TIM1_WR1_OFFS 0x0000032C +#define EBI_DEV3_TIM1_WR1(base) ((base) + EBI_DEV3_TIM1_WR1_OFFS) +#define EBI_DEV3_TIM1_WR2_OFFS 0x00000330 +#define EBI_DEV3_TIM1_WR2(base) ((base) + EBI_DEV3_TIM1_WR2_OFFS) +#define EBI_DEV3_TIM_EXT_OFFS 0x00000334 +#define EBI_DEV3_TIM_EXT(base) ((base) + EBI_DEV3_TIM_EXT_OFFS) +#define EBI_DEV3_TIM2_CFI_RD1_OFFS 0x00000338 +#define EBI_DEV3_TIM2_CFI_RD1(base) ((base) + EBI_DEV3_TIM2_CFI_RD1_OFFS) +#define EBI_DEV3_TIM2_CFI_RD2_OFFS 0x0000033C +#define EBI_DEV3_TIM2_CFI_RD2(base) ((base) + EBI_DEV3_TIM2_CFI_RD2_OFFS) +#define EBI_DEV3_TIM3_DMA1_OFFS 0x00000340 +#define EBI_DEV3_TIM3_DMA1(base) ((base) + EBI_DEV3_TIM3_DMA1_OFFS) +#define EBI_DEV3_TIM3_DMA2_OFFS 0x00000344 +#define EBI_DEV3_TIM3_DMA2(base) ((base) + EBI_DEV3_TIM3_DMA2_OFFS) +#define EBI_DEV3_TIM4_UDMA1_OFFS 0x00000348 +#define EBI_DEV3_TIM4_UDMA1(base) ((base) + EBI_DEV3_TIM4_UDMA1_OFFS) +#define EBI_DEV3_TIM4_UDMA2_OFFS 0x0000034C +#define EBI_DEV3_TIM4_UDMA2(base) ((base) + EBI_DEV3_TIM4_UDMA2_OFFS) +#define EBI_DEV3_ACK_RM_CNT_OFFS 0x00000350 +#define EBI_DEV3_ACK_RM_CNT(base) ((base) + EBI_DEV3_ACK_RM_CNT_OFFS) +#define EBI_DEV4_DMA_EXT_ADDR_OFFS 0x00000400 +#define EBI_DEV4_DMA_EXT_ADDR(base) ((base) + EBI_DEV4_DMA_EXT_ADDR_OFFS) +#define EBI_DEV4_EXT_ACC_OFFS 0x00000404 +#define EBI_DEV4_EXT_ACC(base) ((base) + EBI_DEV4_EXT_ACC_OFFS) +#define EBI_DEV4_CONFIG1_OFFS 0x00000408 +#define EBI_DEV4_CONFIG1(base) ((base) + EBI_DEV4_CONFIG1_OFFS) +#define EBI_DEV4_CONFIG2_OFFS 0x0000040C +#define EBI_DEV4_CONFIG2(base) ((base) + EBI_DEV4_CONFIG2_OFFS) +#define EBI_DEV4_FIFO_CONFIG_OFFS 0x00000410 +#define EBI_DEV4_FIFO_CONFIG(base) ((base) + EBI_DEV4_FIFO_CONFIG_OFFS) +#define EBI_DEV4_FLASH_CONF_ST_OFFS 0x00000414 +#define EBI_DEV4_FLASH_CONF_ST(base) ((base) + EBI_DEV4_FLASH_CONF_ST_OFFS) +#define EBI_DEV4_DMA_CONFIG1_OFFS 0x00000418 +#define EBI_DEV4_DMA_CONFIG1(base) ((base) + EBI_DEV4_DMA_CONFIG1_OFFS) +#define EBI_DEV4_DMA_CONFIG2_OFFS 0x0000041C +#define EBI_DEV4_DMA_CONFIG2(base) ((base) + EBI_DEV4_DMA_CONFIG2_OFFS) +#define EBI_DEV4_DMA_ECC_CTRL_OFFS 0x00000420 +#define EBI_DEV4_DMA_ECC_CTRL(base) ((base) + EBI_DEV4_DMA_ECC_CTRL_OFFS) +#define EBI_DEV4_TIM1_RD1_OFFS 0x00000424 +#define EBI_DEV4_TIM1_RD1(base) ((base) + EBI_DEV4_TIM1_RD1_OFFS) +#define EBI_DEV4_TIM1_RD2_OFFS 0x00000428 +#define EBI_DEV4_TIM1_RD2(base) ((base) + EBI_DEV4_TIM1_RD2_OFFS) +#define EBI_DEV4_TIM1_WR1_OFFS 0x0000042C +#define EBI_DEV4_TIM1_WR1(base) ((base) + EBI_DEV4_TIM1_WR1_OFFS) +#define EBI_DEV4_TIM1_WR2_OFFS 0x00000430 +#define EBI_DEV4_TIM1_WR2(base) ((base) + EBI_DEV4_TIM1_WR2_OFFS) +#define EBI_DEV4_TIM_EXT_OFFS 0x00000434 +#define EBI_DEV4_TIM_EXT(base) ((base) + EBI_DEV4_TIM_EXT_OFFS) +#define EBI_DEV4_TIM2_CFI_RD1_OFFS 0x00000438 +#define EBI_DEV4_TIM2_CFI_RD1(base) ((base) + EBI_DEV4_TIM2_CFI_RD1_OFFS) +#define EBI_DEV4_TIM2_CFI_RD2_OFFS 0x0000043C +#define EBI_DEV4_TIM2_CFI_RD2(base) ((base) + EBI_DEV4_TIM2_CFI_RD2_OFFS) +#define EBI_DEV4_TIM3_DMA1_OFFS 0x00000440 +#define EBI_DEV4_TIM3_DMA1(base) ((base) + EBI_DEV4_TIM3_DMA1_OFFS) +#define EBI_DEV4_TIM3_DMA2_OFFS 0x00000444 +#define EBI_DEV4_TIM3_DMA2(base) ((base) + EBI_DEV4_TIM3_DMA2_OFFS) +#define EBI_DEV4_TIM4_UDMA1_OFFS 0x00000448 +#define EBI_DEV4_TIM4_UDMA1(base) ((base) + EBI_DEV4_TIM4_UDMA1_OFFS) +#define EBI_DEV4_TIM4_UDMA2_OFFS 0x0000044C +#define EBI_DEV4_TIM4_UDMA2(base) ((base) + EBI_DEV4_TIM4_UDMA2_OFFS) +#define EBI_DEV4_ACK_RM_CNT_OFFS 0x00000450 +#define EBI_DEV4_ACK_RM_CNT(base) ((base) + EBI_DEV4_ACK_RM_CNT_OFFS) +#define EBI_INTERLEAVE_CNT_OFFS 0x00000900 +#define EBI_INTERLEAVE_CNT(base) ((base) + EBI_INTERLEAVE_CNT_OFFS) +#define EBI_CNT_FL_PROGR_OFFS 0x00000904 +#define EBI_CNT_FL_PROGR(base) ((base) + EBI_CNT_FL_PROGR_OFFS) +#define EBI_CNT_EXT_PAGE_SZ_OFFS 0x0000090C +#define EBI_CNT_EXT_PAGE_SZ(base) ((base) + EBI_CNT_EXT_PAGE_SZ_OFFS) +#define EBI_CNT_WAIT_RDY_OFFS 0x00000914 +#define EBI_CNT_WAIT_RDY(base) ((base) + EBI_CNT_WAIT_RDY_OFFS) +#define EBI_CNT_ACK_OFFS 0x00000918 +#define EBI_CNT_ACK(base) ((base) + EBI_CNT_ACK_OFFS) +#define EBI_GENIO1_CONFIG1_OFFS 0x00000A00 +#define EBI_GENIO1_CONFIG1(base) ((base) + EBI_GENIO1_CONFIG1_OFFS) +#define EBI_GENIO1_CONFIG2_OFFS 0x00000A04 +#define EBI_GENIO1_CONFIG2(base) ((base) + EBI_GENIO1_CONFIG2_OFFS) +#define EBI_GENIO1_CONFIG3_OFFS 0x00000A08 +#define EBI_GENIO1_CONFIG3(base) ((base) + EBI_GENIO1_CONFIG3_OFFS) +#define EBI_GENIO2_CONFIG1_OFFS 0x00000A10 +#define EBI_GENIO2_CONFIG1(base) ((base) + EBI_GENIO2_CONFIG1_OFFS) +#define EBI_GENIO2_CONFIG2_OFFS 0x00000A14 +#define EBI_GENIO2_CONFIG2(base) ((base) + EBI_GENIO2_CONFIG2_OFFS) +#define EBI_GENIO2_CONFIG3_OFFS 0x00000A18 +#define EBI_GENIO2_CONFIG3(base) ((base) + EBI_GENIO2_CONFIG3_OFFS) +#define EBI_GENIO3_CONFIG1_OFFS 0x00000A20 +#define EBI_GENIO3_CONFIG1(base) ((base) + EBI_GENIO3_CONFIG1_OFFS) +#define EBI_GENIO3_CONFIG2_OFFS 0x00000A24 +#define EBI_GENIO3_CONFIG2(base) ((base) + EBI_GENIO3_CONFIG2_OFFS) +#define EBI_GENIO3_CONFIG3_OFFS 0x00000A28 +#define EBI_GENIO3_CONFIG3(base) ((base) + EBI_GENIO3_CONFIG3_OFFS) +#define EBI_GENIO4_CONFIG1_OFFS 0x00000A30 +#define EBI_GENIO4_CONFIG1(base) ((base) + EBI_GENIO4_CONFIG1_OFFS) +#define EBI_GENIO4_CONFIG2_OFFS 0x00000A34 +#define EBI_GENIO4_CONFIG2(base) ((base) + EBI_GENIO4_CONFIG2_OFFS) +#define EBI_GENIO4_CONFIG3_OFFS 0x00000A38 +#define EBI_GENIO4_CONFIG3(base) ((base) + EBI_GENIO4_CONFIG3_OFFS) +#define EBI_GENIO5_CONFIG1_OFFS 0x00000A40 +#define EBI_GENIO5_CONFIG1(base) ((base) + EBI_GENIO5_CONFIG1_OFFS) +#define EBI_GENIO5_CONFIG2_OFFS 0x00000A44 +#define EBI_GENIO5_CONFIG2(base) ((base) + EBI_GENIO5_CONFIG2_OFFS) +#define EBI_GENIO5_CONFIG3_OFFS 0x00000A48 +#define EBI_GENIO5_CONFIG3(base) ((base) + EBI_GENIO5_CONFIG3_OFFS) + +#endif diff --git a/board/micronas/vct/vctv/reg_dcgu.h b/board/micronas/vct/vctv/reg_dcgu.h new file mode 100644 index 0000000..6f5c968 --- /dev/null +++ b/board/micronas/vct/vctv/reg_dcgu.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define DCGU_BASE 0x0004c000 +#define DCGU_EN_WDT_RESET_OFFS 0x000000FC +#define DCGU_EN_WDT_RESET(base) ((base) + DCGU_EN_WDT_RESET_OFFS) + +/* The magic value to write in order to activate the WDT */ +#define DCGU_MAGIC_WDT 0x1909 diff --git a/board/micronas/vct/vctv/reg_ebi.h b/board/micronas/vct/vctv/reg_ebi.h new file mode 100644 index 0000000..82f345e --- /dev/null +++ b/board/micronas/vct/vctv/reg_ebi.h @@ -0,0 +1,290 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * Copyright (C) 2006 Micronas GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _REG_EBI_PLATINUMAVC_H_ +#define _REG_EBI_PLATINUMAVC_H_ + +#define EBI_BASE 0x00014000 + +/* Relative offsets of the register adresses */ + +#define EBI_CPU_IO_ACCS_OFFS 0x00000000 +#define EBI_CPU_IO_ACCS(base) ((base) + EBI_CPU_IO_ACCS_OFFS) +#define EBI_IO_ACCS_DATA_OFFS 0x00000004 +#define EBI_IO_ACCS_DATA(base) ((base) + EBI_IO_ACCS_DATA_OFFS) +#define EBI_CPU_IO_ACCS2_OFFS 0x00000008 +#define EBI_CPU_IO_ACCS2(base) ((base) + EBI_CPU_IO_ACCS2_OFFS) +#define EBI_IO_ACCS2_DATA_OFFS 0x0000000C +#define EBI_IO_ACCS2_DATA(base) ((base) + EBI_IO_ACCS2_DATA_OFFS) +#define EBI_CTRL_OFFS 0x00000010 +#define EBI_CTRL(base) ((base) + EBI_CTRL_OFFS) +#define EBI_IRQ_MASK_OFFS 0x00000018 +#define EBI_IRQ_MASK(base) ((base) + EBI_IRQ_MASK_OFFS) +#define EBI_IRQ_MASK2_OFFS 0x0000001C +#define EBI_IRQ_MASK2(base) ((base) + EBI_IRQ_MASK2_OFFS) +#define EBI_TAG1_SYS_ID_OFFS 0x00000030 +#define EBI_TAG1_SYS_ID(base) ((base) + EBI_TAG1_SYS_ID_OFFS) +#define EBI_TAG2_SYS_ID_OFFS 0x00000040 +#define EBI_TAG2_SYS_ID(base) ((base) + EBI_TAG2_SYS_ID_OFFS) +#define EBI_TAG3_SYS_ID_OFFS 0x00000050 +#define EBI_TAG3_SYS_ID(base) ((base) + EBI_TAG3_SYS_ID_OFFS) +#define EBI_TAG4_SYS_ID_OFFS 0x00000060 +#define EBI_TAG4_SYS_ID(base) ((base) + EBI_TAG4_SYS_ID_OFFS) +#define EBI_GEN_DMA_CTRL_OFFS 0x00000070 +#define EBI_GEN_DMA_CTRL(base) ((base) + EBI_GEN_DMA_CTRL_OFFS) +#define EBI_STATUS_OFFS 0x00000080 +#define EBI_STATUS(base) ((base) + EBI_STATUS_OFFS) +#define EBI_STATUS_DMA_CNT_OFFS 0x00000084 +#define EBI_STATUS_DMA_CNT(base) ((base) + EBI_STATUS_DMA_CNT_OFFS) +#define EBI_SIG_LEVEL_OFFS 0x00000088 +#define EBI_SIG_LEVEL(base) ((base) + EBI_SIG_LEVEL_OFFS) +#define EBI_CTRL_SIG_ACTLV_OFFS 0x0000008C +#define EBI_CTRL_SIG_ACTLV(base) ((base) + EBI_CTRL_SIG_ACTLV_OFFS) +#define EBI_CRC_GEN_OFFS 0x00000090 +#define EBI_CRC_GEN(base) ((base) + EBI_CRC_GEN_OFFS) +#define EBI_EXT_ADDR_OFFS 0x000000A0 +#define EBI_EXT_ADDR(base) ((base) + EBI_EXT_ADDR_OFFS) +#define EBI_IRQ_STATUS_OFFS 0x000000B0 +#define EBI_IRQ_STATUS(base) ((base) + EBI_IRQ_STATUS_OFFS) +#define EBI_IRQ_STATUS2_OFFS 0x000000B4 +#define EBI_IRQ_STATUS2(base) ((base) + EBI_IRQ_STATUS2_OFFS) +#define EBI_EXT_MASTER_SRAM_HIGH_OFFS 0x000000C0 +#define EBI_EXT_MASTER_SRAM_HIGH(base) ((base) + EBI_EXT_MASTER_SRAM_HIGH_OFFS) +#define EBI_EXT_MASTER_SRAM_LOW_OFFS 0x000000C4 +#define EBI_EXT_MASTER_SRAM_LOW(base) ((base) + EBI_EXT_MASTER_SRAM_LOW_OFFS) +#define EBI_ECC0_OFFS 0x000000D0 +#define EBI_ECC0(base) ((base) + EBI_ECC0_OFFS) +#define EBI_ECC1_OFFS 0x000000D4 +#define EBI_ECC1(base) ((base) + EBI_ECC1_OFFS) +#define EBI_ECC2_OFFS 0x000000D8 +#define EBI_ECC2(base) ((base) + EBI_ECC2_OFFS) +#define EBI_ECC3_OFFS 0x000000DC +#define EBI_ECC3(base) ((base) + EBI_ECC3_OFFS) +#define EBI_DEV1_DMA_EXT_ADDR_OFFS 0x00000100 +#define EBI_DEV1_DMA_EXT_ADDR(base) ((base) + EBI_DEV1_DMA_EXT_ADDR_OFFS) +#define EBI_DEV1_EXT_ACC_OFFS 0x00000104 +#define EBI_DEV1_EXT_ACC(base) ((base) + EBI_DEV1_EXT_ACC_OFFS) +#define EBI_DEV1_CONFIG1_OFFS 0x00000108 +#define EBI_DEV1_CONFIG1(base) ((base) + EBI_DEV1_CONFIG1_OFFS) +#define EBI_DEV1_CONFIG2_OFFS 0x0000010C +#define EBI_DEV1_CONFIG2(base) ((base) + EBI_DEV1_CONFIG2_OFFS) +#define EBI_DEV1_FIFO_CONFIG_OFFS 0x00000110 +#define EBI_DEV1_FIFO_CONFIG(base) ((base) + EBI_DEV1_FIFO_CONFIG_OFFS) +#define EBI_DEV1_FLASH_CONF_ST_OFFS 0x00000114 +#define EBI_DEV1_FLASH_CONF_ST(base) ((base) + EBI_DEV1_FLASH_CONF_ST_OFFS) +#define EBI_DEV1_DMA_CONFIG1_OFFS 0x00000118 +#define EBI_DEV1_DMA_CONFIG1(base) ((base) + EBI_DEV1_DMA_CONFIG1_OFFS) +#define EBI_DEV1_DMA_CONFIG2_OFFS 0x0000011C +#define EBI_DEV1_DMA_CONFIG2(base) ((base) + EBI_DEV1_DMA_CONFIG2_OFFS) +#define EBI_DEV1_DMA_ECC_CTRL_OFFS 0x00000120 +#define EBI_DEV1_DMA_ECC_CTRL(base) ((base) + EBI_DEV1_DMA_ECC_CTRL_OFFS) +#define EBI_DEV1_TIM1_RD1_OFFS 0x00000124 +#define EBI_DEV1_TIM1_RD1(base) ((base) + EBI_DEV1_TIM1_RD1_OFFS) +#define EBI_DEV1_TIM1_RD2_OFFS 0x00000128 +#define EBI_DEV1_TIM1_RD2(base) ((base) + EBI_DEV1_TIM1_RD2_OFFS) +#define EBI_DEV1_TIM1_WR1_OFFS 0x0000012C +#define EBI_DEV1_TIM1_WR1(base) ((base) + EBI_DEV1_TIM1_WR1_OFFS) +#define EBI_DEV1_TIM1_WR2_OFFS 0x00000130 +#define EBI_DEV1_TIM1_WR2(base) ((base) + EBI_DEV1_TIM1_WR2_OFFS) +#define EBI_DEV1_TIM_EXT_OFFS 0x00000134 +#define EBI_DEV1_TIM_EXT(base) ((base) + EBI_DEV1_TIM_EXT_OFFS) +#define EBI_DEV1_TIM2_CFI_RD1_OFFS 0x00000138 +#define EBI_DEV1_TIM2_CFI_RD1(base) ((base) + EBI_DEV1_TIM2_CFI_RD1_OFFS) +#define EBI_DEV1_TIM2_CFI_RD2_OFFS 0x0000013C +#define EBI_DEV1_TIM2_CFI_RD2(base) ((base) + EBI_DEV1_TIM2_CFI_RD2_OFFS) +#define EBI_DEV1_TIM3_DMA1_OFFS 0x00000140 +#define EBI_DEV1_TIM3_DMA1(base) ((base) + EBI_DEV1_TIM3_DMA1_OFFS) +#define EBI_DEV1_TIM3_DMA2_OFFS 0x00000144 +#define EBI_DEV1_TIM3_DMA2(base) ((base) + EBI_DEV1_TIM3_DMA2_OFFS) +#define EBI_DEV1_TIM4_UDMA1_OFFS 0x00000148 +#define EBI_DEV1_TIM4_UDMA1(base) ((base) + EBI_DEV1_TIM4_UDMA1_OFFS) +#define EBI_DEV1_TIM4_UDMA2_OFFS 0x0000014C +#define EBI_DEV1_TIM4_UDMA2(base) ((base) + EBI_DEV1_TIM4_UDMA2_OFFS) +#define EBI_DEV1_ACK_RM_CNT_OFFS 0x00000150 +#define EBI_DEV1_ACK_RM_CNT(base) ((base) + EBI_DEV1_ACK_RM_CNT_OFFS) +#define EBI_DEV2_DMA_EXT_ADDR_OFFS 0x00000200 +#define EBI_DEV2_DMA_EXT_ADDR(base) ((base) + EBI_DEV2_DMA_EXT_ADDR_OFFS) +#define EBI_DEV2_EXT_ACC_OFFS 0x00000204 +#define EBI_DEV2_EXT_ACC(base) ((base) + EBI_DEV2_EXT_ACC_OFFS) +#define EBI_DEV2_CONFIG1_OFFS 0x00000208 +#define EBI_DEV2_CONFIG1(base) ((base) + EBI_DEV2_CONFIG1_OFFS) +#define EBI_DEV2_CONFIG2_OFFS 0x0000020C +#define EBI_DEV2_CONFIG2(base) ((base) + EBI_DEV2_CONFIG2_OFFS) +#define EBI_DEV2_FIFO_CONFIG_OFFS 0x00000210 +#define EBI_DEV2_FIFO_CONFIG(base) ((base) + EBI_DEV2_FIFO_CONFIG_OFFS) +#define EBI_DEV2_FLASH_CONF_ST_OFFS 0x00000214 +#define EBI_DEV2_FLASH_CONF_ST(base) ((base) + EBI_DEV2_FLASH_CONF_ST_OFFS) +#define EBI_DEV2_DMA_CONFIG1_OFFS 0x00000218 +#define EBI_DEV2_DMA_CONFIG1(base) ((base) + EBI_DEV2_DMA_CONFIG1_OFFS) +#define EBI_DEV2_DMA_CONFIG2_OFFS 0x0000021C +#define EBI_DEV2_DMA_CONFIG2(base) ((base) + EBI_DEV2_DMA_CONFIG2_OFFS) +#define EBI_DEV2_DMA_ECC_CTRL_OFFS 0x00000220 +#define EBI_DEV2_DMA_ECC_CTRL(base) ((base) + EBI_DEV2_DMA_ECC_CTRL_OFFS) +#define EBI_DEV2_TIM1_RD1_OFFS 0x00000224 +#define EBI_DEV2_TIM1_RD1(base) ((base) + EBI_DEV2_TIM1_RD1_OFFS) +#define EBI_DEV2_TIM1_RD2_OFFS 0x00000228 +#define EBI_DEV2_TIM1_RD2(base) ((base) + EBI_DEV2_TIM1_RD2_OFFS) +#define EBI_DEV2_TIM1_WR1_OFFS 0x0000022C +#define EBI_DEV2_TIM1_WR1(base) ((base) + EBI_DEV2_TIM1_WR1_OFFS) +#define EBI_DEV2_TIM1_WR2_OFFS 0x00000230 +#define EBI_DEV2_TIM1_WR2(base) ((base) + EBI_DEV2_TIM1_WR2_OFFS) +#define EBI_DEV2_TIM_EXT_OFFS 0x00000234 +#define EBI_DEV2_TIM_EXT(base) ((base) + EBI_DEV2_TIM_EXT_OFFS) +#define EBI_DEV2_TIM2_CFI_RD1_OFFS 0x00000238 +#define EBI_DEV2_TIM2_CFI_RD1(base) ((base) + EBI_DEV2_TIM2_CFI_RD1_OFFS) +#define EBI_DEV2_TIM2_CFI_RD2_OFFS 0x0000023C +#define EBI_DEV2_TIM2_CFI_RD2(base) ((base) + EBI_DEV2_TIM2_CFI_RD2_OFFS) +#define EBI_DEV2_TIM3_DMA1_OFFS 0x00000240 +#define EBI_DEV2_TIM3_DMA1(base) ((base) + EBI_DEV2_TIM3_DMA1_OFFS) +#define EBI_DEV2_TIM3_DMA2_OFFS 0x00000244 +#define EBI_DEV2_TIM3_DMA2(base) ((base) + EBI_DEV2_TIM3_DMA2_OFFS) +#define EBI_DEV2_TIM4_UDMA1_OFFS 0x00000248 +#define EBI_DEV2_TIM4_UDMA1(base) ((base) + EBI_DEV2_TIM4_UDMA1_OFFS) +#define EBI_DEV2_TIM4_UDMA2_OFFS 0x0000024C +#define EBI_DEV2_TIM4_UDMA2(base) ((base) + EBI_DEV2_TIM4_UDMA2_OFFS) +#define EBI_DEV2_ACK_RM_CNT_OFFS 0x00000250 +#define EBI_DEV2_ACK_RM_CNT(base) ((base) + EBI_DEV2_ACK_RM_CNT_OFFS) +#define EBI_DEV3_DMA_EXT_ADDR_OFFS 0x00000300 +#define EBI_DEV3_DMA_EXT_ADDR(base) ((base) + EBI_DEV3_DMA_EXT_ADDR_OFFS) +#define EBI_DEV3_EXT_ACC_OFFS 0x00000304 +#define EBI_DEV3_EXT_ACC(base) ((base) + EBI_DEV3_EXT_ACC_OFFS) +#define EBI_DEV3_CONFIG1_OFFS 0x00000308 +#define EBI_DEV3_CONFIG1(base) ((base) + EBI_DEV3_CONFIG1_OFFS) +#define EBI_DEV3_CONFIG2_OFFS 0x0000030C +#define EBI_DEV3_CONFIG2(base) ((base) + EBI_DEV3_CONFIG2_OFFS) +#define EBI_DEV3_FIFO_CONFIG_OFFS 0x00000310 +#define EBI_DEV3_FIFO_CONFIG(base) ((base) + EBI_DEV3_FIFO_CONFIG_OFFS) +#define EBI_DEV3_FLASH_CONF_ST_OFFS 0x00000314 +#define EBI_DEV3_FLASH_CONF_ST(base) ((base) + EBI_DEV3_FLASH_CONF_ST_OFFS) +#define EBI_DEV3_DMA_CONFIG1_OFFS 0x00000318 +#define EBI_DEV3_DMA_CONFIG1(base) ((base) + EBI_DEV3_DMA_CONFIG1_OFFS) +#define EBI_DEV3_DMA_CONFIG2_OFFS 0x0000031C +#define EBI_DEV3_DMA_CONFIG2(base) ((base) + EBI_DEV3_DMA_CONFIG2_OFFS) +#define EBI_DEV3_DMA_ECC_CTRL_OFFS 0x00000320 +#define EBI_DEV3_DMA_ECC_CTRL(base) ((base) + EBI_DEV3_DMA_ECC_CTRL_OFFS) +#define EBI_DEV3_TIM1_RD1_OFFS 0x00000324 +#define EBI_DEV3_TIM1_RD1(base) ((base) + EBI_DEV3_TIM1_RD1_OFFS) +#define EBI_DEV3_TIM1_RD2_OFFS 0x00000328 +#define EBI_DEV3_TIM1_RD2(base) ((base) + EBI_DEV3_TIM1_RD2_OFFS) +#define EBI_DEV3_TIM1_WR1_OFFS 0x0000032C +#define EBI_DEV3_TIM1_WR1(base) ((base) + EBI_DEV3_TIM1_WR1_OFFS) +#define EBI_DEV3_TIM1_WR2_OFFS 0x00000330 +#define EBI_DEV3_TIM1_WR2(base) ((base) + EBI_DEV3_TIM1_WR2_OFFS) +#define EBI_DEV3_TIM_EXT_OFFS 0x00000334 +#define EBI_DEV3_TIM_EXT(base) ((base) + EBI_DEV3_TIM_EXT_OFFS) +#define EBI_DEV3_TIM2_CFI_RD1_OFFS 0x00000338 +#define EBI_DEV3_TIM2_CFI_RD1(base) ((base) + EBI_DEV3_TIM2_CFI_RD1_OFFS) +#define EBI_DEV3_TIM2_CFI_RD2_OFFS 0x0000033C +#define EBI_DEV3_TIM2_CFI_RD2(base) ((base) + EBI_DEV3_TIM2_CFI_RD2_OFFS) +#define EBI_DEV3_TIM3_DMA1_OFFS 0x00000340 +#define EBI_DEV3_TIM3_DMA1(base) ((base) + EBI_DEV3_TIM3_DMA1_OFFS) +#define EBI_DEV3_TIM3_DMA2_OFFS 0x00000344 +#define EBI_DEV3_TIM3_DMA2(base) ((base) + EBI_DEV3_TIM3_DMA2_OFFS) +#define EBI_DEV3_TIM4_UDMA1_OFFS 0x00000348 +#define EBI_DEV3_TIM4_UDMA1(base) ((base) + EBI_DEV3_TIM4_UDMA1_OFFS) +#define EBI_DEV3_TIM4_UDMA2_OFFS 0x0000034C +#define EBI_DEV3_TIM4_UDMA2(base) ((base) + EBI_DEV3_TIM4_UDMA2_OFFS) +#define EBI_DEV3_ACK_RM_CNT_OFFS 0x00000350 +#define EBI_DEV3_ACK_RM_CNT(base) ((base) + EBI_DEV3_ACK_RM_CNT_OFFS) +#define EBI_DEV4_DMA_EXT_ADDR_OFFS 0x00000400 +#define EBI_DEV4_DMA_EXT_ADDR(base) ((base) + EBI_DEV4_DMA_EXT_ADDR_OFFS) +#define EBI_DEV4_EXT_ACC_OFFS 0x00000404 +#define EBI_DEV4_EXT_ACC(base) ((base) + EBI_DEV4_EXT_ACC_OFFS) +#define EBI_DEV4_CONFIG1_OFFS 0x00000408 +#define EBI_DEV4_CONFIG1(base) ((base) + EBI_DEV4_CONFIG1_OFFS) +#define EBI_DEV4_CONFIG2_OFFS 0x0000040C +#define EBI_DEV4_CONFIG2(base) ((base) + EBI_DEV4_CONFIG2_OFFS) +#define EBI_DEV4_FIFO_CONFIG_OFFS 0x00000410 +#define EBI_DEV4_FIFO_CONFIG(base) ((base) + EBI_DEV4_FIFO_CONFIG_OFFS) +#define EBI_DEV4_FLASH_CONF_ST_OFFS 0x00000414 +#define EBI_DEV4_FLASH_CONF_ST(base) ((base) + EBI_DEV4_FLASH_CONF_ST_OFFS) +#define EBI_DEV4_DMA_CONFIG1_OFFS 0x00000418 +#define EBI_DEV4_DMA_CONFIG1(base) ((base) + EBI_DEV4_DMA_CONFIG1_OFFS) +#define EBI_DEV4_DMA_CONFIG2_OFFS 0x0000041C +#define EBI_DEV4_DMA_CONFIG2(base) ((base) + EBI_DEV4_DMA_CONFIG2_OFFS) +#define EBI_DEV4_DMA_ECC_CTRL_OFFS 0x00000420 +#define EBI_DEV4_DMA_ECC_CTRL(base) ((base) + EBI_DEV4_DMA_ECC_CTRL_OFFS) +#define EBI_DEV4_TIM1_RD1_OFFS 0x00000424 +#define EBI_DEV4_TIM1_RD1(base) ((base) + EBI_DEV4_TIM1_RD1_OFFS) +#define EBI_DEV4_TIM1_RD2_OFFS 0x00000428 +#define EBI_DEV4_TIM1_RD2(base) ((base) + EBI_DEV4_TIM1_RD2_OFFS) +#define EBI_DEV4_TIM1_WR1_OFFS 0x0000042C +#define EBI_DEV4_TIM1_WR1(base) ((base) + EBI_DEV4_TIM1_WR1_OFFS) +#define EBI_DEV4_TIM1_WR2_OFFS 0x00000430 +#define EBI_DEV4_TIM1_WR2(base) ((base) + EBI_DEV4_TIM1_WR2_OFFS) +#define EBI_DEV4_TIM_EXT_OFFS 0x00000434 +#define EBI_DEV4_TIM_EXT(base) ((base) + EBI_DEV4_TIM_EXT_OFFS) +#define EBI_DEV4_TIM2_CFI_RD1_OFFS 0x00000438 +#define EBI_DEV4_TIM2_CFI_RD1(base) ((base) + EBI_DEV4_TIM2_CFI_RD1_OFFS) +#define EBI_DEV4_TIM2_CFI_RD2_OFFS 0x0000043C +#define EBI_DEV4_TIM2_CFI_RD2(base) ((base) + EBI_DEV4_TIM2_CFI_RD2_OFFS) +#define EBI_DEV4_TIM3_DMA1_OFFS 0x00000440 +#define EBI_DEV4_TIM3_DMA1(base) ((base) + EBI_DEV4_TIM3_DMA1_OFFS) +#define EBI_DEV4_TIM3_DMA2_OFFS 0x00000444 +#define EBI_DEV4_TIM3_DMA2(base) ((base) + EBI_DEV4_TIM3_DMA2_OFFS) +#define EBI_DEV4_TIM4_UDMA1_OFFS 0x00000448 +#define EBI_DEV4_TIM4_UDMA1(base) ((base) + EBI_DEV4_TIM4_UDMA1_OFFS) +#define EBI_DEV4_TIM4_UDMA2_OFFS 0x0000044C +#define EBI_DEV4_TIM4_UDMA2(base) ((base) + EBI_DEV4_TIM4_UDMA2_OFFS) +#define EBI_DEV4_ACK_RM_CNT_OFFS 0x00000450 +#define EBI_DEV4_ACK_RM_CNT(base) ((base) + EBI_DEV4_ACK_RM_CNT_OFFS) +#define EBI_INTERLEAVE_CNT_OFFS 0x00000900 +#define EBI_INTERLEAVE_CNT(base) ((base) + EBI_INTERLEAVE_CNT_OFFS) +#define EBI_CNT_FL_PROGR_OFFS 0x00000904 +#define EBI_CNT_FL_PROGR(base) ((base) + EBI_CNT_FL_PROGR_OFFS) +#define EBI_CNT_EXT_PAGE_SZ_OFFS 0x0000090C +#define EBI_CNT_EXT_PAGE_SZ(base) ((base) + EBI_CNT_EXT_PAGE_SZ_OFFS) +#define EBI_CNT_WAIT_RDY_OFFS 0x00000914 +#define EBI_CNT_WAIT_RDY(base) ((base) + EBI_CNT_WAIT_RDY_OFFS) +#define EBI_CNT_ACK_OFFS 0x00000918 +#define EBI_CNT_ACK(base) ((base) + EBI_CNT_ACK_OFFS) +#define EBI_GENIO1_CONFIG1_OFFS 0x00000A00 +#define EBI_GENIO1_CONFIG1(base) ((base) + EBI_GENIO1_CONFIG1_OFFS) +#define EBI_GENIO1_CONFIG2_OFFS 0x00000A04 +#define EBI_GENIO1_CONFIG2(base) ((base) + EBI_GENIO1_CONFIG2_OFFS) +#define EBI_GENIO1_CONFIG3_OFFS 0x00000A08 +#define EBI_GENIO1_CONFIG3(base) ((base) + EBI_GENIO1_CONFIG3_OFFS) +#define EBI_GENIO2_CONFIG1_OFFS 0x00000A10 +#define EBI_GENIO2_CONFIG1(base) ((base) + EBI_GENIO2_CONFIG1_OFFS) +#define EBI_GENIO2_CONFIG2_OFFS 0x00000A14 +#define EBI_GENIO2_CONFIG2(base) ((base) + EBI_GENIO2_CONFIG2_OFFS) +#define EBI_GENIO2_CONFIG3_OFFS 0x00000A18 +#define EBI_GENIO2_CONFIG3(base) ((base) + EBI_GENIO2_CONFIG3_OFFS) +#define EBI_GENIO3_CONFIG1_OFFS 0x00000A20 +#define EBI_GENIO3_CONFIG1(base) ((base) + EBI_GENIO3_CONFIG1_OFFS) +#define EBI_GENIO3_CONFIG2_OFFS 0x00000A24 +#define EBI_GENIO3_CONFIG2(base) ((base) + EBI_GENIO3_CONFIG2_OFFS) +#define EBI_GENIO3_CONFIG3_OFFS 0x00000A28 +#define EBI_GENIO3_CONFIG3(base) ((base) + EBI_GENIO3_CONFIG3_OFFS) +#define EBI_GENIO4_CONFIG1_OFFS 0x00000A30 +#define EBI_GENIO4_CONFIG1(base) ((base) + EBI_GENIO4_CONFIG1_OFFS) +#define EBI_GENIO4_CONFIG2_OFFS 0x00000A34 +#define EBI_GENIO4_CONFIG2(base) ((base) + EBI_GENIO4_CONFIG2_OFFS) +#define EBI_GENIO4_CONFIG3_OFFS 0x00000A38 +#define EBI_GENIO4_CONFIG3(base) ((base) + EBI_GENIO4_CONFIG3_OFFS) +#define EBI_GENIO5_CONFIG1_OFFS 0x00000A40 +#define EBI_GENIO5_CONFIG1(base) ((base) + EBI_GENIO5_CONFIG1_OFFS) +#define EBI_GENIO5_CONFIG2_OFFS 0x00000A44 +#define EBI_GENIO5_CONFIG2(base) ((base) + EBI_GENIO5_CONFIG2_OFFS) +#define EBI_GENIO5_CONFIG3_OFFS 0x00000A48 +#define EBI_GENIO5_CONFIG3(base) ((base) + EBI_GENIO5_CONFIG3_OFFS) + +#endif diff --git a/board/micronas/vct/vctv/reg_gpio.h b/board/micronas/vct/vctv/reg_gpio.h new file mode 100644 index 0000000..24eb8e9 --- /dev/null +++ b/board/micronas/vct/vctv/reg_gpio.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define GPIO1_BASE 0x00044000 +#define GPIO2_BASE 0x00048000 + +/* Instances */ +#define GPIO_INSTANCES 2 + +/* Relative offsets of the register adresses */ +#define GPIO_SWPORTA_DR_OFFS 0x00000000 +#define GPIO_SWPORTA_DR(base) ((base) + GPIO_SWPORTA_DR_OFFS) +#define GPIO_SWPORTA_DDR_OFFS 0x00000004 +#define GPIO_SWPORTA_DDR(base) ((base) + GPIO_SWPORTA_DDR_OFFS) +#define GPIO_EXT_PORTA_OFFS 0x00000050 +#define GPIO_EXT_PORTA(base) ((base) + GPIO_EXT_PORTA_OFFS) diff --git a/board/micronas/vct/vctv/reg_wdt.h b/board/micronas/vct/vctv/reg_wdt.h new file mode 100644 index 0000000..04842e5 --- /dev/null +++ b/board/micronas/vct/vctv/reg_wdt.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define WDT_BASE 0x00040000 +#define WDT_CR_OFFS 0x00000000 +#define WDT_CR(base) ((base) + WDT_CR_OFFS) +#define WDT_TORR_OFFS 0x00000004 +#define WDT_TORR(base) ((base) + WDT_TORR_OFFS) diff --git a/include/configs/vct.h b/include/configs/vct.h new file mode 100644 index 0000000..5ef88ec --- /dev/null +++ b/include/configs/vct.h @@ -0,0 +1,310 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr(a)denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the VCT board + * family: + * + * vct_premium + * vct_premium_small + * vct_premium_onenand + * vct_premium_onenand_small + * vct_platinum + * vct_platinum_small + * vct_platinum_onenand + * vct_platinum_onenand_small + * vct_platinumavc + * vct_platinumavc_small + * vct_platinumavc_onenand + * vct_platinumavc_onenand_small + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ +#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ +#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_STACKSIZE (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (1 << 20) +#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND) +#define CONFIG_VCT_NOR +#else +#define CONFIG_SYS_NO_FLASH +#endif + +/* + * UART + */ +#define CONFIG_VCT_SERIAL +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * SDRAM + */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_MBYTES_SDRAM 128 +#define CONFIG_SYS_MEMTEST_START 0x80200000 +#define CONFIG_SYS_MEMTEST_END 0x80400000 +#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ + +#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) +/* + * SMSC91C11x Network Card + */ +#define CONFIG_DRIVER_SMC911X +#define CONFIG_DRIVER_SMC911X_BASE 0x00000000 +#define CONFIG_DRIVER_SMC911X_32_BIT +#define CONFIG_NET_RETRY_COUNT 20 +#endif + +/* + * Commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C + +/* + * Only Premium/Platinum have ethernet support right now + */ +#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP +#else +#undef CONFIG_CMD_NET +#endif + +#if !defined(CONFIG_VCT_NOR) +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#endif + +#if defined(CONFIG_VCT_NAND) +#define CONFIG_CMD_NAND +#endif + +#if defined(CONFIG_VCT_ONENAND) +#define CONFIG_CMD_ONENAND +#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_SUBNETMASK + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "VCT# " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ + +/* + * FLASH and environment organization + */ +#if defined(CONFIG_VCT_NOR) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_NOT_MEM_MAPPED + +/* + * We need special accessor functions for the CFI FLASH driver. This + * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option. + */ +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * For the non-memory-mapped NOR FLASH, we need to define the + * NOR FLASH area. This can't be detected via the addr2info() + * function, since we check for flash access in the very early + * U-Boot code, before the NOR FLASH is detected. + */ +#define CONFIG_FLASH_BASE 0xb0000000 +#define CONFIG_FLASH_END 0xbfffffff + +/* + * CFI driver settings + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ + +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif /* CONFIG_ENV_IS_IN_FLASH */ +#endif /* CONFIG_VCT_NOR */ + +#if defined(CONFIG_VCT_ONENAND) +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_ENV_IS_IN_ONENAND +#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */ +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */ +#define CONFIG_ENV_SIZE (128 << 10) /* erase size */ +#endif /* CONFIG_VCT_ONENAND */ + +/* + * Cache Configuration + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* + * I2C/EEPROM + */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +#define CONFIG_SYS_I2C_SPEED 83000 /* 83 kHz is supposed to work */ +#define CONFIG_SYS_I2C_SLAVE 0x7f + +/* + * Software (bit-bang) I2C driver configuration + */ +#define CONFIG_SYS_GPIO_I2C_SCL 11 +#define CONFIG_SYS_GPIO_I2C_SDA 10 + +#ifndef __ASSEMBLY__ +int vct_gpio_dir(int pin, int dir); +void vct_gpio_set(int pin, int val); +int vct_gpio_get(int pin); +#endif + +#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1) +#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1) +#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0) +#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA) +#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit) +#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit) +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +/* CAT24WC32 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ + /* 32 byte page write mode using*/ + /* last 5 bits of the address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +#define CONFIG_BOOTCOMMAND "run test3" +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* + * Needed for 64bit printf format + */ +#define CONFIG_SYS_64BIT_VSPRINTF 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 + +/* + * UBI configuration + */ +#if defined(CONFIG_VCT_ONENAND) +#define CONFIG_SYS_USE_UBI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_JFFS2_CMDLINE + +#define MTDIDS_DEFAULT "onenand0=onenand" +#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \ + "128k(env)," \ + "20m(kernel)," \ + "-(rootfs)" +#endif + +/* + * We need a small, stripped down image to fit into the first 128k OneNAND + * erase block (gzipped). This image only needs basic commands for FLASH + * (NOR/OneNAND) usage and Linux kernel booting. + */ +#if defined(CONFIG_VCT_SMALL_IMAGE) +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_REGINFO +#undef CONFIG_CMD_STRINGS +#undef CONFIG_CMD_TERMINAL +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_CRC32 +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADY +#undef CONFIG_CMD_BDI + +#undef CONFIG_DRIVER_SMC911X +#undef CONFIG_SOFT_I2C +#undef CONFIG_AUTOSCRIPT +#undef CONFIG_SYS_LONGHELP +#undef CONFIG_TIMESTAMP +#endif /* CONFIG_VCT_SMALL_IMAGE */ + +#endif /* __CONFIG_H */ -- 1.6.0.5

1 0

[U-Boot] [PATCH v4] Add support for boards where the NOR FLASH is not memory-mapped
by Stefan Roese 15 Dec '08

15 Dec '08

This patch adds the CONFIG_FLASH_NOT_MEM_MAPPED define which can be used on boards where the NOR FLASH is not memory-mapped and special accessor functions are needed to access the NOR FLASH. This affects the memory commands (cmd_mem.c) and the environment (env_flash.c). Boards using CONFIG_FLASH_NOT_MEM_MAPPED need to additionally specify CONFIG_FLASH_BASE and CONFIG_FLASH_END so that the NOR FLASH region can be detected. This will be used by the upcoming VCT board support. Signed-off-by: Stefan Roese <sr(a)denx.de> --- v4: - Fix a problem with "normal" NOR FLASH in "cp" command v3: - Removed some gratuitous underscores in function parameters - Prototypes moved to header (common.h) - Removed ";" after macro definition v2: - Added configuration option description to the README - Fix bug in NOR FLASH end detection in env_flash.c (spotted by Wolfgang) - Further "cleanup" of the env_flash code supporting non memory-mapped NOR FLASH. - Macros in crc32.h now wrapped in "do { ... } while (0)" as suggested by Wolfgang README | 17 +++++++++++++ common/cmd_mem.c | 62 ++++++++++++++++++++++++++++++++++++----------- common/env_flash.c | 66 +++++++++++++++++++++++++++++++++++++++++---------- include/common.h | 8 ++++++ lib_generic/crc32.c | 26 +++++++++++++++++--- 5 files changed, 147 insertions(+), 32 deletions(-) diff --git a/README b/README index 2a553c2..3414d66 100644 --- a/README +++ b/README @@ -2198,6 +2198,23 @@ Configuration Settings: digits and dots. Recommended value: 45 (9..1) for 80 column displays, 15 (3..1) for 40 column displays. +- CONFIG_FLASH_NOT_MEM_MAPPED + Unfortunately there are boards, where the NOR FLASH can't + be accessed memory mapped. So we needed to find a way to + access those FLASH's from the CFI driver and the environment. + For the non-memory-mapped NOR FLASH, we need to define the + NOR FLASH area. This can't be detected via the addr2info() + function, since we check for flash access in the very early + U-Boot code, before the NOR FLASH is detected. So we need + to additionally define the following options to configure + the NOR FLASH range: + + - CONFIG_FLASH_BASE + Starting address of the NOR FLASH area + + - CONFIG_FLASH_END + Highest possible address of the NOR FLASH area + - CONFIG_SYS_RX_ETH_BUFFER: Defines the number of Ethernet receive buffers. On some Ethernet controllers it is recommended to set this value diff --git a/common/cmd_mem.c b/common/cmd_mem.c index d7666c2..742fffa 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -43,6 +43,39 @@ #define PRINTF(fmt,args...) #endif +#if defined(CONFIG_HAS_DATAFLASH) +#define CONFIG_FLASH_NOT_MEM_MAPPED +#define OK DATAFLASH_OK +#endif + +#if !defined(OK) +#define OK 1 +#endif + +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) +static inline int flash_read(void *to, const void *from, int n) +{ +#if defined(CONFIG_HAS_DATAFLASH) + return read_dataflash(from, n, to); +#elif defined(CONFIG_FLASH_NOT_MEM_MAPPED) + if ((addr2info((u32)from) != NULL)) + board_flash_read_memcpy(to, from, n); + else + memcpy(to, from, n); + return OK; +#endif +} +#endif /* defined(CONFIG_FLASH_NOT_MEM_MAPPED) */ + +static inline int is_flash_addr(u32 addr) +{ +#if defined(CONFIG_HAS_DATAFLASH) + return addr_dataflash(addr); +#else + return (addr2info(addr) != NULL); +#endif +} + static int mod_mem(cmd_tbl_t *, int, int, int, char *[]); /* Display values from last command. @@ -63,7 +96,7 @@ static ulong base_address = 0; int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong addr, length; -#if defined(CONFIG_HAS_DATAFLASH) +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) ulong nbytes, linebytes; #endif int size; @@ -100,7 +133,7 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) length = simple_strtoul(argv[2], NULL, 16); } -#if defined(CONFIG_HAS_DATAFLASH) +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) /* Print the lines. * * We buffer all read data, so we can make sure data is read only @@ -112,10 +145,13 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) void* p; linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; - rc = read_dataflash(addr, (linebytes/size)*size, linebuf); - p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr; + rc = flash_read(linebuf, (void *)addr, (linebytes/size)*size); + p = (rc == OK) ? linebuf : (void *)addr; print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size); + /* Clear rc, otherwise command repeat doesn't work */ + rc = 0; + nbytes -= linebytes; addr += linebytes; if (ctrlc()) { @@ -294,9 +330,9 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) count = simple_strtoul(argv[3], NULL, 16); -#ifdef CONFIG_HAS_DATAFLASH - if (addr_dataflash(addr1) | addr_dataflash(addr2)){ - puts ("Comparison with DataFlash space not supported.\n\r"); +#ifdef CONFIG_FLASH_NOT_MEM_MAPPED + if (is_flash_addr(addr1) || is_flash_addr(addr2)) { + puts ("Comparison with FLASH space not supported.\n\r"); return 0; } #endif @@ -385,11 +421,7 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifndef CONFIG_SYS_NO_FLASH /* check if we are copying to Flash */ - if ( (addr2info(dest) != NULL) -#ifdef CONFIG_HAS_DATAFLASH - && (!addr_dataflash(dest)) -#endif - ) { + if (is_flash_addr(dest)) { int rc; puts ("Copy to Flash... "); @@ -1010,9 +1042,9 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) addr += base_address; } -#ifdef CONFIG_HAS_DATAFLASH - if (addr_dataflash(addr)){ - puts ("Can't modify DataFlash in place. Use cp instead.\n\r"); +#ifdef CONFIG_FLASH_NOT_MEM_MAPPED + if (is_flash_addr(addr)) { + puts ("Can't modify FLASH in place. Use cp instead.\n\r"); return 0; } #endif diff --git a/common/env_flash.c b/common/env_flash.c index 75ee8dd..becc0dc 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -85,9 +85,46 @@ static ulong end_addr_new = CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1; extern uchar default_environment[]; extern int default_environment_size; +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) +#define FLASH_READ_MEMCPY(d, s, n) board_flash_read_memcpy(d, s, n) +#else +#define FLASH_READ_MEMCPY(d, s, n) memcpy(d, s, n) +#endif /* CONFIG_FLASH_NOT_MEM_MAPPED */ + +/* + * On boards where the NOR FLASH is not memory mapped, this function + * returns 1 when the address is in the NOR FLASH range. On "normal" boards, + * where the NOR FLASH is memory mapped this function always returns 0. + * This way GCC removes the true path in the following functions calling + * addr_in_flash_range() by optimization. + */ +static inline int addr_in_flash_range(u32 addr) +{ +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) + if ((addr >= CONFIG_FLASH_BASE) && (addr <= CONFIG_FLASH_END)) + return 1; +#endif + return 0; +} + +static inline u8 read_env8(u8 *addr) +{ + if (addr_in_flash_range((u32)addr)) + return flash_read8((void *)addr); + return *addr; +} + +static inline u32 read_env32(u32 *addr) +{ + if (addr_in_flash_range((u32)addr)) + return flash_read32((void *)addr); + return *addr; +} uchar env_get_char_spec (int index) { + if (addr_in_flash_range((u32)gd->env_addr)) + return (flash_read8((void *)gd->env_addr + index)); return ( *((uchar *)(gd->env_addr + index)) ); } @@ -97,15 +134,17 @@ int env_init(void) { int crc1_ok = 0, crc2_ok = 0; - uchar flag1 = flash_addr->flags; - uchar flag2 = flash_addr_new->flags; + uchar flag1 = read_env8(&flash_addr->flags); + uchar flag2 = read_env8(&flash_addr_new->flags); ulong addr_default = (ulong)&default_environment[0]; ulong addr1 = (ulong)&(flash_addr->data); ulong addr2 = (ulong)&(flash_addr_new->data); - crc1_ok = (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc); - crc2_ok = (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc); + crc1_ok = (crc32(0, flash_addr->data, ENV_SIZE) == + read_env32(&flash_addr->crc)); + crc2_ok = (crc32(0, flash_addr_new->data, ENV_SIZE) == + read_env32(&flash_addr_new->crc)); if (crc1_ok && ! crc2_ok) { gd->env_addr = addr1; @@ -169,8 +208,9 @@ int saveenv(void) up_data); goto Done; } - memcpy(saved_data, - (void *)((long)flash_addr_new + CONFIG_ENV_SIZE), up_data); + FLASH_READ_MEMCPY(saved_data, + (void *)((long)flash_addr_new + CONFIG_ENV_SIZE), + up_data); debug ("Data (start 0x%x, len 0x%x) saved at 0x%x\n", (long)flash_addr_new + CONFIG_ENV_SIZE, up_data, saved_data); @@ -246,7 +286,7 @@ Done: int env_init(void) { - if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { + if (crc32(0, env_ptr->data, ENV_SIZE) == read_env32(&env_ptr->crc)) { gd->env_addr = (ulong)&(env_ptr->data); gd->env_valid = 1; return(0); @@ -282,7 +322,7 @@ int saveenv(void) flash_sect_addr, (ulong)flash_addr, flash_offset); /* copy old contents to temporary buffer */ - memcpy (env_buffer, (void *)flash_sect_addr, CONFIG_ENV_SECT_SIZE); + FLASH_READ_MEMCPY(env_buffer, (void *)flash_sect_addr, CONFIG_ENV_SECT_SIZE); /* copy current environment to temporary buffer */ memcpy ((uchar *)((unsigned long)env_buffer + flash_offset), @@ -346,9 +386,9 @@ void env_relocate_spec (void) end_addr_new = ltmp; } - if (flash_addr_new->flags != OBSOLETE_FLAG && + if (read_env8(&flash_addr_new->flags) != OBSOLETE_FLAG && crc32(0, flash_addr_new->data, ENV_SIZE) == - flash_addr_new->crc) { + read_env32(&flash_addr_new->crc)) { char flag = OBSOLETE_FLAG; gd->env_valid = 2; @@ -359,8 +399,8 @@ void env_relocate_spec (void) flash_sect_protect (1, (ulong)flash_addr_new, end_addr_new); } - if (flash_addr->flags != ACTIVE_FLAG && - (flash_addr->flags & ACTIVE_FLAG) == ACTIVE_FLAG) { + if (read_env8(&flash_addr->flags) != ACTIVE_FLAG && + (read_env8(&flash_addr->flags) & ACTIVE_FLAG) == ACTIVE_FLAG) { char flag = ACTIVE_FLAG; gd->env_valid = 2; @@ -376,7 +416,7 @@ void env_relocate_spec (void) "reading environment; recovered successfully\n\n"); #endif /* CONFIG_ENV_ADDR_REDUND */ #ifdef CMD_SAVEENV - memcpy (env_ptr, (void*)flash_addr, CONFIG_ENV_SIZE); + FLASH_READ_MEMCPY(env_ptr, (void*)flash_addr, CONFIG_ENV_SIZE); #endif #endif /* ! ENV_IS_EMBEDDED || CONFIG_ENV_ADDR_REDUND */ } diff --git a/include/common.h b/include/common.h index 5968036..18687c6 100644 --- a/include/common.h +++ b/include/common.h @@ -716,6 +716,14 @@ int cpu_reset(int nr); int cpu_release(int nr, int argc, char *argv[]); #endif +/* + * Functions only needed when CONFIG_FLASH_NOT_MEM_MAPPED is defined + * for boards where the NOR FLASH can't be accessed memory-mapped. + */ +void *board_flash_read_memcpy(void *to, const void *from, size_t n); +u8 flash_read8(void *addr); +u32 flash_read32(void *addr); + #ifdef CONFIG_POST #define CONFIG_HAS_POST #endif diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c index b6a7a91..9067209 100644 --- a/lib_generic/crc32.c +++ b/lib_generic/crc32.c @@ -148,10 +148,28 @@ const uint32_t * ZEXPORT get_crc_table() #endif /* ========================================================================= */ -#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED) +#define DO1(buf) \ + do { \ + if (((u32)buf >= CONFIG_FLASH_BASE) && \ + ((u32)buf <= CONFIG_FLASH_END)) { \ + crc = crc_table[ ((int)crc ^ \ + (flash_read8((void *)buf++))) & 0xff] ^ \ + (crc >> 8); \ + } else { \ + crc = crc_table[((int)crc ^ \ + (*buf++)) & 0xff] ^ (crc >> 8); \ + } \ + } while (0) +#else +#define DO1(buf) \ + do { \ + crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); \ + } while (0) +#endif +#define DO2(buf) do { DO1(buf); DO1(buf); } while (0) +#define DO4(buf) do { DO2(buf); DO2(buf); } while (0) +#define DO8(buf) do { DO4(buf); DO4(buf); } while (0) /* ========================================================================= */ uint32_t ZEXPORT crc32 (uint32_t crc, const Bytef *buf, uInt len) -- 1.6.0.5

1 0

[U-Boot] [PATCH] fix bmp_logo.h make dependencies to allow parallel build
by Jean-Christophe PLAGNIOL-VILLARD 15 Dec '08

15 Dec '08

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> --- Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Makefile b/Makefile index 0e31697..623b8f7 100644 --- a/Makefile +++ b/Makefile @@ -340,7 +340,7 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) -$(LIBS): depend $(obj)include/autoconf.mk +$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk -- 1.5.6.5

1 0

[U-Boot] [PATCH] at91: Fix Atmel's at91sam9 boards out of tree build
by Jean-Christophe PLAGNIOL-VILLARD 15 Dec '08

15 Dec '08

introduced in commit 89a7a87f084c Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> --- Makefile | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/Makefile b/Makefile index 2ac8141..0e31697 100644 --- a/Makefile +++ b/Makefile @@ -2586,6 +2586,7 @@ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2602,6 +2603,7 @@ at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ at91sam9261ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2618,6 +2620,7 @@ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ at91sam9263ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2631,6 +2634,7 @@ at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ at91sam9rlek_dataflash_cs0_config \ at91sam9rlek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ -- 1.5.6.5

1 0

[U-Boot] [U-Boot-v2][PATCH] imx27: set pagesize_2k after probing the nand flash
by frederic rodo 15 Dec '08

15 Dec '08

Signed-off-by:Frederic Rodo <fred.rodo(a)gmail.com> Date: Mon, 15 Dec 2008 14:37:18 +0100 Subject: [PATCH] set pagesize_2k after probing the nand flash --- drivers/nand/nand_imx.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/nand/nand_imx.c b/drivers/nand/nand_imx.c index fbef9b7..d15c6b0 100644 --- a/drivers/nand/nand_imx.c +++ b/drivers/nand/nand_imx.c @@ -1056,16 +1056,24 @@ static int __init imxnd_probe(struct device_d *dev) this->ecc.layout = &nand_hw_eccoob_16; } - host->pagesize_2k = 0; - /* Scan to find existence of the device */ - if (nand_scan(mtd, 1)) { + if (nand_scan_ident(mtd, 1)) { DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND: Unable to find any NAND device.\n"); err = -ENXIO; goto escan; } + if (mtd->writesize == 2048) + host->pagesize_2k = 1; + + if (nand_scan_tail(mtd)) { + DEBUG(MTD_DEBUG_LEVEL0, + "MXC_ND: Unable to initialize the NAND device.\n"); + err = -ENXIO; + goto escan; + } + add_mtd_device(mtd); #ifdef CONFIG_MXC_NAND_LOW_LEVEL_ERASE -- 1.4.4.4

1 0

[U-Boot] [U-Boot-v2][PATCH] imx27: correct READ ID cmd with 2k pages
by frederic rodo 15 Dec '08

15 Dec '08

Signed-off-by:Frederic Rodo <fred.rodo(a)gmail.com> <fred.rodo(a)gmail.com> Date: Thu, 11 Dec 2008 13:05:53 +0100 Subject: [PATCH] correct send_id with 2k page --- drivers/nand/nand_imx.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/drivers/nand/nand_imx.c b/drivers/nand/nand_imx.c index 3bf67de..fbef9b7 100644 --- a/drivers/nand/nand_imx.c +++ b/drivers/nand/nand_imx.c @@ -315,6 +315,9 @@ static void send_read_id(struct imx_nand_host *host) /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); + /* correct 2 send_read_id successive */ + host->col_addr = 0; + if (this->options & NAND_BUSWIDTH_16) { volatile u16 *mainbuf = host->regs + MAIN_AREA0; @@ -865,7 +868,7 @@ static void imx_nand_command(struct mtd_info *mtd, unsigned command, * the full page. */ send_addr(host, 0); - if (host->pagesize_2k) + if ((host->pagesize_2k) && (command != NAND_CMD_READID)) /* another col addr cycle for 2k page */ send_addr(host, 0); } -- 1.4.4.4

1 0