This patch fixes the PCI handling routines of the IXP port.
It seems that this hasn't been touched for quite a while and
u-boot PCI handling has changed since then (but nobody
update IXP).
Changes (list uncomplete):
- non_prefetched_read/write now return ERROR on
(master-) abort.
- fixed pci configuration space access.
- pci_read_config_XXX now return value 0xff even in
case of error (as some callers do not check the
return value)
- Removed CONFIG_PCI_SCAN_SHOW, as printf is not
possible at the time pci_scan is called initially
- fixed some IXP initialization of memory spaces
- fixed address and irq assignment to PCI devices
- fixed pci_find_device
- some reformatting
Note: I think boards should always define IXP425_PCI_SIMPLE_MAPPING
Patch was tested with Janz emPC-A400.
Signed-off-by: Stefan Althoefer <stefan.althoefer(a)web.de>
---
I revised the patch as I found some more errors.
board/ixdp425/ixdp425.c | 9 +
cpu/ixp/pci.c | 407 ++++++++++++++++++++--------------
drivers/pci/pci_indirect.c | 4 +-
include/asm-arm/arch-ixp/ixp425pci.h | 14 +-
4 files changed, 260 insertions(+), 174 deletions(-)
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index 43ac8f6..ef2f7d5 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -118,9 +118,18 @@ void pci_init_board(void)
pci_ixp_init(&hose);
}
+
+#include <pci.h>
+int pciTranslateIrq(pci_dev_t dev, int intPin)
+{
+ /* FIXME: This needs to be implemented by someone
+ who onws an IXDP425 board */
+ return 0;
+}
#endif
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
+
diff --git a/cpu/ixp/pci.c b/cpu/ixp/pci.c
index 8c6b0b2..6586ba1 100644
--- a/cpu/ixp/pci.c
+++ b/cpu/ixp/pci.c
@@ -33,16 +33,15 @@
#include <asm/arch/ixp425.h>
#include <asm/arch/ixp425pci.h>
-static void non_prefetch_read (unsigned int addr, unsigned int cmd,
+static int non_prefetch_read (unsigned int addr, unsigned int cmd,
unsigned int *data);
-static void non_prefetch_write (unsigned int addr, unsigned int cmd,
+static int non_prefetch_write (unsigned int addr, unsigned int cmd,
unsigned int data);
static void configure_pins (void);
static void sys_pci_gpio_clock_config (void);
-static void pci_bus_scan (void);
-static int pci_device_exists (unsigned int deviceNo);
-static void sys_pci_bar_info_get (unsigned int devnum, unsigned int bus,
- unsigned int dev, unsigned int func);
+void pci_bus_scan (void);
+static int pci_device_exists (pci_dev_t dev);
+static void sys_pci_bar_info_get (unsigned int devnum, pci_dev_t dev);
static void sys_pci_device_bars_write (void);
static void calc_bars (PciBar * Bars[], unsigned int nBars,
unsigned int startAddr);
@@ -68,15 +67,36 @@ PciBar *memBars[IXP425_PCI_MAX_BAR];
PciBar *ioBars[IXP425_PCI_MAX_BAR];
PciDevice devices[IXP425_PCI_MAX_FUNC_ON_BUS];
+
+extern int pciTranslateIrq(pci_dev_t dev, int intPin);
+
+static int ixp4xx_config_addr(u32 *addr, pci_dev_t devfn, int where)
+{
+ if (!(PCI_BUS(devfn))) {
+ /* type 0 */
+ if (PCI_DEV(devfn) > 20)
+ return ERROR;
+ *addr = BIT(32-PCI_DEV(devfn)) | ((PCI_FUNC(devfn)) << 8)
+ | (where & ~3);
+ } else {
+ /* type 1 */
+ *addr = (PCI_BUS(devfn) << 16) | ((PCI_DEV(devfn)) << 11)
+ | ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
+ }
+ return OK;
+}
+
int pci_read_config_dword (pci_dev_t dev, int where, unsigned int *val)
{
unsigned int retval;
unsigned int addr;
- /*address bits 31:28 specify the device 10:8 specify the function */
- /*Set the address to be read */
- addr = BIT ((31 - dev)) | (where & ~3);
- non_prefetch_read (addr, NP_CMD_CONFIGREAD, &retval);
+ *val = 0xffffffff;
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_read(addr, NP_CMD_CONFIGREAD, &retval) != OK ){
+ return ERROR;
+ }
*val = retval;
@@ -90,6 +110,7 @@ int pci_read_config_word (pci_dev_t dev, int where, unsigned short *val)
unsigned int addr;
unsigned int byteEnables;
+ *val = 0xffff;
n = where % 4;
/*byte enables are 4 bits active low, the position of each
bit maps to the byte that it enables */
@@ -97,10 +118,12 @@ int pci_read_config_word (pci_dev_t dev, int where, unsigned short *val)
(~(BIT (n) | BIT ((n + 1)))) &
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
- /*address bits 31:28 specify the device 10:8 specify the function */
- /*Set the address to be read */
- addr = BIT ((31 - dev)) | (where & ~3);
- non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD,
+ &retval) != OK ){
+ return ERROR;
+ }
/*Pick out the word we are interested in */
*val = (retval >> (8 * n));
@@ -115,16 +138,18 @@ int pci_read_config_byte (pci_dev_t dev, int where, unsigned char *val)
unsigned int byteEnables;
unsigned int addr;
+ *val = 0xff;
n = where % 4;
/*byte enables are 4 bits, active low, the position of each
bit maps to the byte that it enables */
byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
-
- /*address bits 31:28 specify the device, 10:8 specify the function */
- /*Set the address to be read */
- addr = BIT ((31 - dev)) | (where & ~3);
- non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD,
+ &retval) != OK ){
+ return ERROR;
+ }
/*Pick out the byte we are interested in */
*val = (retval >> (8 * n));
@@ -144,10 +169,12 @@ int pci_write_config_byte (pci_dev_t dev, int where, unsigned char val)
byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
ldata = val << (8 * n);
- /*address bits 31:28 specify the device 10:8 specify the function */
- /*Set the address to be written */
- addr = BIT ((31 - dev)) | (where & ~3);
- non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE,
+ ldata) != OK ){
+ return ERROR;
+ }
return (OK);
}
@@ -167,10 +194,12 @@ int pci_write_config_word (pci_dev_t dev, int where, unsigned short val)
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
ldata = val << (8 * n);
- /*address bits 31:28 specify the device 10:8 specify the function */
- /*Set the address to be written */
- addr = BIT (31 - dev) | (where & ~3);
- non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE,
+ ldata) != OK ){
+ return ERROR;
+ }
return (OK);
}
@@ -179,31 +208,41 @@ int pci_write_config_dword (pci_dev_t dev, int where, unsigned int val)
{
unsigned int addr;
- /*address bits 31:28 specify the device 10:8 specify the function */
- /*Set the address to be written */
- addr = BIT (31 - dev) | (where & ~3);
- non_prefetch_write (addr, NP_CMD_CONFIGWRITE, val);
+ if (ixp4xx_config_addr(&addr, dev, where & ~3))
+ return ERROR;
+ if( non_prefetch_write(addr, NP_CMD_CONFIGWRITE, val) != OK ){
+ return ERROR;
+ }
return (OK);
}
-void non_prefetch_read (unsigned int addr,
+int non_prefetch_read (unsigned int addr,
unsigned int cmd, unsigned int *data)
{
- REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
+ unsigned int isr;
+ REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
/*set up and execute the read */
REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd);
-
/*The result of the read is now in np_rdata */
REG_READ (PCI_CSR_BASE, PCI_NP_RDATA_OFFSET, *data);
- return;
+ /* Check for abort */
+ REG_READ(PCI_CSR_BASE, PCI_ISR_OFFSET, isr);
+ if (isr & PCI_ISR_PFE) {
+ /* clear the bit */
+ REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE);
+ return ERROR;
+ }
+
+ return OK;
}
-void non_prefetch_write (unsigned int addr,
+int non_prefetch_write (unsigned int addr,
unsigned int cmd, unsigned int data)
{
+ unsigned int isr;
REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
/*set up the write */
@@ -211,7 +250,15 @@ void non_prefetch_write (unsigned int addr,
/*Execute the write by writing to NP_WDATA */
REG_WRITE (PCI_CSR_BASE, PCI_NP_WDATA_OFFSET, data);
- return;
+ /* Check for abort */
+ REG_READ (PCI_CSR_BASE, PCI_ISR_OFFSET, isr);
+ if( isr & PCI_ISR_PFE ){
+ /* clear the bit */
+ REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE);
+ return ERROR;
+ }
+
+ return OK;
}
/*
@@ -226,7 +273,8 @@ void crp_read (unsigned int offset, unsigned int *data)
void crp_write (unsigned int offset, unsigned int data)
{
- /*The CRP address register bit 16 indicates that we want to do a write */
+ /*The CRP address register bit 16 indicates that we want to do a
+ write */
REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET,
PCI_CRP_WRITE | offset);
REG_WRITE (PCI_CSR_BASE, PCI_CRP_WDATA_OFFSET, data);
@@ -257,11 +305,10 @@ void pci_ixp_init (struct pci_controller *hose)
pci_register_hose (hose);
-/*
- ==========================================================
- Init IXP PCI
- ==========================================================
-*/
+ /*
+ * Init IXP PCI
+ */
+
REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
regval |= 1 << 2;
REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
@@ -304,9 +351,7 @@ void pci_ixp_init (struct pci_controller *hose)
pci_write_config_word (0, PCI_CFG_COMMAND, INITIAL_PCI_CMD);
REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
| PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf ("Device bus dev func deviceID vendorID \n");
-#endif
+
pci_bus_scan ();
}
@@ -347,76 +392,108 @@ void sys_pci_gpio_clock_config (void)
WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
}
+
void pci_bus_scan (void)
{
- unsigned int bus = 0, dev, func = 0;
+ int busno, devno, funcno;
+ int multifunction;
+ pci_dev_t dev;
unsigned short data16;
- unsigned int data32;
- unsigned char intPin;
+ unsigned int data32;
+ unsigned char intPin;
+
+ unsigned int vendorId;
+ unsigned char HeaderType;
/* Assign first device to ourselves */
- devices[0].bus = 0;
- devices[0].device = 0;
- devices[0].func = 0;
+ devices[0].device = PCI_BDF(0,0,0);
crp_read (PCI_CFG_VENDOR_ID, &data32);
devices[0].vendor_id = data32 & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK;
devices[0].device_id = data32 >> 16;
devices[0].error = FALSE;
- devices[0].bar[NO_BAR].size = 0; /*dummy - required */
+ devices[0].bar[NO_BAR].size = 0; /* dummy - required */
nDevices = 1;
nMBars = 0;
nIOBars = 0;
- for (dev = 0; dev < IXP425_PCI_MAX_DEV; dev++) {
-
- /*Check whether a device is present */
- if (pci_device_exists (dev) != TRUE) {
-
- /*Clear error bits in ISR, write 1 to clear */
- REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
- | PCI_ISR_PFE | PCI_ISR_PPE |
- PCI_ISR_AHBE);
- continue;
- }
-
- /*A device is present, add an entry to the array */
- devices[nDevices].bus = bus;
- devices[nDevices].device = dev;
- devices[nDevices].func = func;
-
- pci_read_config_word (dev, PCI_CFG_VENDOR_ID, &data16);
-
- devices[nDevices].vendor_id = data16;
-
- pci_read_config_word (dev, PCI_CFG_DEVICE_ID, &data16);
- devices[nDevices].device_id = data16;
-
- /*The device is functioning correctly, set error to FALSE */
- devices[nDevices].error = FALSE;
-
- /*Figure out what BARs are on this device */
- sys_pci_bar_info_get (nDevices, bus, dev, func);
- /*Figure out what INTX# line the card uses */
- pci_read_config_byte (dev, PCI_CFG_DEV_INT_PIN, &intPin);
-
- /*assign the appropriate irq line */
- if (intPin > PCI_IRQ_LINES) {
- devices[nDevices].error = TRUE;
- } else if (intPin != 0) {
- /*This device uses an interrupt line */
- /*devices[nDevices].irq = ixp425PciIntTranslate[dev][intPin-1]; */
- devices[nDevices].irq = intPin;
+ for (busno=0; busno<2; busno++) {
+ for (devno=0; devno<PCI_MAX_PCI_DEVICES; devno++) {
+ multifunction = 0;
+ for (funcno=0; funcno<PCI_MAX_PCI_FUNCTIONS; funcno++) {
+ dev = PCI_BDF(busno,devno,funcno);
+
+ if (funcno && !multifunction)
+ break;
+
+ if (pci_read_config_dword(dev,
+ PCI_CFG_VENDOR_ID,
+ &vendorId)
+ == ERROR ){
+ if (!funcno)
+ break;
+ else
+ continue;
+ }
+
+ if (vendorId == 0x0) {
+ funcno=PCI_MAX_PCI_FUNCTIONS;
+ continue;
+ }
+
+ pci_read_config_byte(dev, PCI_HEADER_TYPE,
+ &HeaderType);
+ if (funcno == 0) {
+ if (HeaderType & 0x80) {
+ multifunction = 1;
+ }
+ }
+
+ /* A device is present, add an entry to the
+ array */
+ devices[nDevices].device = dev;
+
+ pci_read_config_word (dev, PCI_CFG_VENDOR_ID,
+ &data16);
+
+ devices[nDevices].vendor_id = data16;
+
+ pci_read_config_word (dev, PCI_CFG_DEVICE_ID,
+ &data16);
+ devices[nDevices].device_id = data16;
+
+ /* The device is functioning correctly, set
+ error to FALSE */
+ devices[nDevices].error = FALSE;
+
+ if ((HeaderType&~0x80)==0) {
+ /*Figure out what BARs are on this
+ device */
+ sys_pci_bar_info_get (nDevices, dev);
+ /*Figure out what INTX# line the card
+ uses */
+ pci_read_config_byte (dev,
+ PCI_CFG_DEV_INT_PIN,
+ &intPin);
+
+ /*assign the appropriate irq line */
+ if (intPin > PCI_IRQ_LINES) {
+ devices[nDevices].error = TRUE;
+ } else if (intPin != 0) {
+ /*This device uses an interrupt
+ line */
+ devices[nDevices].irq =
+ pciTranslateIrq(dev,intPin);
+ }
+ } else {
+ /* ToDo: Handle bridges */
+ }
+ nDevices++;
+ }
}
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf ("%06d %03d %03d %04d %08d %08x\n", nDevices,
- devices[nDevices].vendor_id);
-#endif
- nDevices++;
-
}
calc_bars (memBars, nMBars, IXP425_PCI_BAR_MEM_BASE);
@@ -426,44 +503,46 @@ void pci_bus_scan (void)
| PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
}
-void sys_pci_bar_info_get (unsigned int devnum,
- unsigned int bus,
- unsigned int dev, unsigned int func)
+
+void sys_pci_bar_info_get (unsigned int devnum, pci_dev_t dev)
{
unsigned int data32;
unsigned int tmp;
unsigned int size;
+ int bar;
- pci_write_config_dword (devnum,
- PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_QUERY);
- pci_read_config_dword (devnum, PCI_CFG_BASE_ADDRESS_0, &data32);
-
- devices[devnum].bar[0].address = (data32 & 1);
+ for(bar=0; bar<=5; bar++){
+ pci_write_config_dword (dev,
+ PCI_CFG_BASE_ADDRESS_0+(4*bar),
+ IXP425_PCI_BAR_QUERY);
+ pci_read_config_dword (dev, PCI_CFG_BASE_ADDRESS_0+(4*bar),
+ &data32);
- if (data32 & 1) {
- /* IO space */
- tmp = data32 & ~0x3;
- size = ~(tmp - 1);
- devices[devnum].bar[0].size = size;
+ devices[devnum].bar[dev].address = (data32 & 1);
- if (nIOBars < IXP425_PCI_MAX_BAR) {
- ioBars[nIOBars++] = &devices[devnum].bar[0];
- }
- } else {
- /* Mem space */
- tmp = data32 & ~IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
- size = ~(tmp - 1);
- devices[devnum].bar[0].size = size;
+ if (data32 & 1) {
+ /* IO space */
+ tmp = data32 & ~0x3;
+ size = ~(tmp - 1);
+ devices[devnum].bar[bar].size = size;
- if (nMBars < IXP425_PCI_MAX_BAR) {
- memBars[nMBars++] = &devices[devnum].bar[0];
+ if (nIOBars < IXP425_PCI_MAX_BAR) {
+ ioBars[nIOBars++] = &devices[devnum].bar[bar];
+ }
} else {
- devices[devnum].error = TRUE;
- }
+ /* Mem space */
+ tmp = data32 & ~IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+ size = ~(tmp - 1);
+ devices[devnum].bar[bar].size = size;
+
+ if (nMBars < IXP425_PCI_MAX_BAR) {
+ memBars[nMBars++] = &devices[devnum].bar[bar];
+ } else {
+ devices[devnum].error = TRUE;
+ }
+ }
}
-
- devices[devnum].bar[1].size = 0;
}
void sortBars (PciBar * Bars[], unsigned int nBars)
@@ -497,77 +576,77 @@ void calc_bars (PciBar * Bars[], unsigned int nBars, unsigned int startAddr)
}
for (i = 0; i < nBars; i++) {
- Bars[i]->address |= startAddr;
- startAddr += Bars[i]->size;
+ if( Bars[i]->size > 0 ){
+ if( startAddr & ((Bars[i]->size)-1) ){
+ startAddr |= ((Bars[i]->size)-1);
+ startAddr += 1;
+ }
+ Bars[i]->address |= startAddr;
+ startAddr += Bars[i]->size;
+ }
}
}
void sys_pci_device_bars_write (void)
{
- unsigned int i;
- int addr;
+ unsigned int i, bar;
for (i = 1; i < nDevices; i++) {
if (devices[i].error) {
continue;
}
- pci_write_config_dword (devices[i].device,
- PCI_CFG_BASE_ADDRESS_0,
- devices[i].bar[0].address);
- addr = BIT (31 - devices[i].device) |
- (0 << PCI_NP_AD_FUNCSL) |
- (PCI_CFG_BASE_ADDRESS_0 & ~3);
- pci_write_config_dword (devices[i].device,
- PCI_CFG_DEV_INT_LINE, devices[i].irq);
+ for(bar=0; bar<5; bar++){
+ pci_write_config_dword (devices[i].device,
+ PCI_CFG_BASE_ADDRESS_0+(4*bar),
+ devices[i].bar[bar].address);
+ }
+
+ pci_write_config_byte (devices[i].device,
+ PCI_CFG_DEV_INT_LINE, devices[i].irq);
pci_write_config_word (devices[i].device,
PCI_CFG_COMMAND, INITIAL_PCI_CMD);
-
}
}
-int pci_device_exists (unsigned int deviceNo)
+int pci_device_exists (pci_dev_t dev)
{
unsigned int vendorId;
- unsigned int regval;
- pci_read_config_dword (deviceNo, PCI_CFG_VENDOR_ID, &vendorId);
+ if (pci_read_config_dword(dev, PCI_CFG_VENDOR_ID,
+ &vendorId) == ERROR) {
+ return FALSE;
+ }
- /* There are two ways to find out an empty device.
- * 1. check Master Abort bit after the access.
- * 2. check whether the vendor id read back is 0x0.
- */
- REG_READ (PCI_CSR_BASE, PCI_ISR_OFFSET, regval);
- if ((vendorId != 0x0) && ((regval & PCI_ISR_PFE) == 0)) {
+ if ( vendorId != 0x0 ) {
return TRUE;
}
- /*no device present, make sure that the master abort bit is reset */
- REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE);
return FALSE;
}
-pci_dev_t pci_find_devices (struct pci_device_id * ids, int devNo)
+pci_dev_t pci_find_devices (struct pci_device_id *ids, int devNo)
{
- unsigned int i;
+ unsigned int i,k;
unsigned int devdidvid;
unsigned int didvid;
- unsigned int vendorId, deviceId;
-
- vendorId = ids->vendor;
- deviceId = ids->device;
- didvid = ((deviceId << 16) & IXP425_PCI_TOP_WORD_OF_LONG_MASK) |
- (vendorId & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK);
- for (i = devNo + 1; i < nDevices; i++) {
-
- pci_read_config_dword (devices[i].device, PCI_CFG_VENDOR_ID,
- &devdidvid);
-
- if (devdidvid == didvid) {
- return devices[i].device;
+ for (i = 1; i < nDevices; i++) {
+ devdidvid = (devices[i].device_id << 16)
+ + devices[i].vendor_id;
+
+ for (k = 0; ids[k].vendor != 0; k++) {
+ didvid = ((ids[k].device << 16)
+ & IXP425_PCI_TOP_WORD_OF_LONG_MASK);
+ didvid |= (ids[k].vendor
+ & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK);
+
+ if (devdidvid == didvid) {
+ if (devNo-- == 0)
+ return devices[i].device;
+ }
}
}
return -1;
diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c
index ab51f8d..cd3a6f6 100644
--- a/drivers/pci/pci_indirect.c
+++ b/drivers/pci/pci_indirect.c
@@ -11,7 +11,7 @@
#include <common.h>
-#if (!defined(__I386__) && !defined(CONFIG_IXDP425))
+#if (!defined(__I386__) && !defined(CONFIG_IXP425))
#include <asm/processor.h>
#include <asm/io.h>
@@ -133,4 +133,4 @@ void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
hose->cfg_data = (unsigned char *) cfg_data;
}
-#endif /* !__I386__ && !CONFIG_IXDP425 */
+#endif /* !__I386__ && !CONFIG_IXP425 */
diff --git a/include/asm-arm/arch-ixp/ixp425pci.h b/include/asm-arm/arch-ixp/ixp425pci.h
index 9ea3319..e533e90 100644
--- a/include/asm-arm/arch-ixp/ixp425pci.h
+++ b/include/asm-arm/arch-ixp/ixp425pci.h
@@ -52,9 +52,7 @@ typedef struct
typedef struct
{
- unsigned int bus;
- unsigned int device;
- unsigned int func;
+ pci_dev_t device;
unsigned int irq;
BOOL error;
unsigned short vendor_id;
@@ -74,13 +72,13 @@ typedef struct
#define IXP425_PCI_BAR_QUERY 0xffffffff
-#define IXP425_PCI_BAR_MEM_BASE 0x100000
-#define IXP425_PCI_BAR_IO_BASE 0x000000
+#define IXP425_PCI_BAR_MEM_BASE 0x48000000
+#define IXP425_PCI_BAR_IO_BASE 0x00000000 /* not supported */
/*define the maximum number of bus segments - we support a single segment*/
-#define IXP425_PCI_MAX_BUS 1
+#define IXP425_PCI_MAX_BUS 4
/*define the maximum number of cards per bus segment*/
-#define IXP425_PCI_MAX_DEV 4
+#define IXP425_PCI_MAX_DEV 8
/*define the maximum number of functions per device*/
#define IXP425_PCI_MAX_FUNC 8
/* define the maximum number of separate functions that we can
@@ -153,7 +151,7 @@ typedef struct
/*define the default setting of the AHB memory base reg*/
#define IXP425_PCI_AHBMEMBASE_DEFAULT 0x00010203
#define IXP425_PCI_AHBIOBASE_DEFAULT 0x0
-#define IXP425_PCI_PCIMEMBASE_DEFAULT 0x0
+#define IXP425_PCI_PCIMEMBASE_DEFAULT 0x48494a4b
/*define the default settings for the controller's BARs*/
#ifdef IXP425_PCI_SIMPLE_MAPPING
--
1.5.4.5
