January 2008 - U-Boot

[U-Boot-Users] send bytes on non-console serial port during boot
by embedded 08 Jan '08

08 Jan '08

Within the board init code, I'd like to initialize a device that is connected to a non-console serial port. (SCC4) (console on smc1) This is simply done by setting up the serial port 9600 8n1 and sending to bytes: 0x3 and 0x1. Is there a way to use existing uboot routines to setup and send a few bytes? I find a lot of code for setting up console serial ports, but I'm not familiar enough with the serial code-paths to initialize and transmit a few bytes on the serial line without running the full console setup. Any pointers would be great. setup brg

1 0

[U-Boot-Users] Please pull u-boot-mpc83xx.git
by Kim Phillips 08 Jan '08

08 Jan '08

Wolfgang D., please pull mainly mpc837x support and libfdt code updates for mpc83xx (this pull request depends on the mpc85xx pull request): The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2: Wolfgang Denk (1): Release v1.3.1 are available in the git repository at: git://www.denx.de/git/u-boot-mpc83xx.git Anton Vorontsov (1): MPC8360E-MDS: configure and enable second UART Dave Liu (6): mpc83xx: Add the support of MPC837x SoC mpc83xx: Add the support of MPC8315E SoC mpc83xx: Add the support of MPC837xEMDS board mpc83xx: Add the MPC837xEMDS board readme mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds mpc83xx: update the CREDITS and MAINTAINERS Joakim Tjernlund (1): Add support CONFIG_UEC_ETH3 in MPC83xx Kim Phillips (8): mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x mpc83xx: fix remaining fdt_find_node_by_path references mpc83xx: supress compiler warning mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x) mpc83xx: convert to using do_fixup_*() mpc83xx: remove FLAT_TREE code mpc83xx: rm remaining FLAT_TREE code Kumar Gala (1): Remove CONFIG options related to OF that we dont use Paul Gortmaker (3): sbc8349: Remove board specific ECC code sbc8349: migrate board to libfdt sbc8349: enable libfdt by default on WRS SBC8349 board. Timur Tabi (1): 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions CREDITS | 5 + MAINTAINERS | 2 + MAKEALL | 1 + Makefile | 10 + board/freescale/mpc8313erdb/mpc8313erdb.c | 14 +- board/freescale/mpc8323erdb/mpc8323erdb.c | 10 - board/freescale/mpc832xemds/mpc832xemds.c | 14 +- board/freescale/mpc832xemds/pci.c | 46 +-- board/freescale/mpc8349emds/mpc8349emds.c | 14 +- board/freescale/mpc8349emds/pci.c | 76 ++--- board/freescale/mpc8349itx/mpc8349itx.c | 14 +- board/freescale/mpc8349itx/pci.c | 76 ++--- board/freescale/mpc8360emds/mpc8360emds.c | 61 +++- board/freescale/mpc8360emds/pci.c | 46 +-- board/freescale/mpc837xemds/Makefile | 50 +++ board/freescale/mpc837xemds/config.mk | 28 ++ board/freescale/mpc837xemds/mpc837xemds.c | 132 +++++++ board/freescale/mpc837xemds/pci.c | 65 +++ board/sbc8349/pci.c | 52 ++- board/sbc8349/sbc8349.c | 347 +---------------- cpu/mpc83xx/Makefile | 2 +- cpu/mpc83xx/cpu.c | 362 ++---------------- cpu/mpc83xx/cpu_init.c | 6 +- cpu/mpc83xx/fdt.c | 72 ++++ cpu/mpc83xx/pci.c | 83 ++--- cpu/mpc83xx/spd_sdram.c | 7 +- cpu/mpc83xx/speed.c | 201 ++++++++-- doc/README.mpc837xemds | 104 +++++ drivers/net/tsec.c | 10 + drivers/qe/uec.c | 23 ++ include/asm-ppc/global_data.h | 15 +- include/asm-ppc/immap_83xx.h | 145 +++++++- include/configs/MPC8313ERDB.h | 9 +- include/configs/MPC8323ERDB.h | 12 +- include/configs/MPC832XEMDS.h | 12 +- include/configs/MPC8349EMDS.h | 8 +- include/configs/MPC8349ITX.h | 11 +- include/configs/MPC8360EMDS.h | 15 +- include/configs/MPC837XEMDS.h | 600 +++++++++++++++++++++++++++++ include/configs/sbc8349.h | 10 +- include/mpc83xx.h | 261 ++++++++++++-- net/eth.c | 3 + 42 files changed, 1953 insertions(+), 1081 deletions(-) create mode 100644 board/freescale/mpc837xemds/Makefile create mode 100644 board/freescale/mpc837xemds/config.mk create mode 100644 board/freescale/mpc837xemds/mpc837xemds.c create mode 100644 board/freescale/mpc837xemds/pci.c create mode 100644 cpu/mpc83xx/fdt.c create mode 100644 doc/README.mpc837xemds create mode 100644 include/configs/MPC837XEMDS.h p.s. I was unable to get the UEC and PHY latency fixes to a satisfactory state without re-reverting the relocation for 83xx commit (assuming that was what was causing Joakim's and Russell's problem). Now I'm going on vacation (random email access). btw, they should probably go through Ben Warren (net custodian) anyway. Kim

3 5

[U-Boot-Users] Pull request: u-boot-fdt.git
by Jerry Van Baren 08 Jan '08

08 Jan '08

Dear Wolfgang: Please pull from the master branch at git://denx.de/git/u-boot-fdt.git Thanks, gvb The following changes since commit 74ac5facb988fc488a707db228b177ead63a6541: Wolfgang Denk (1): Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/ are available in the git repository at: git://www.denx.de/git/u-boot-fdt.git master David Gibson (2): libfdt: Add more documentation (patch the sixth) libfdt: Add more documentation (patch the seventh) Gerald Van Baren (5): Support setting FDT properties with optional values. Improve the FDT help message. Fine grained per property /chosen updating. LIBFDT: use memmove() instead of memcpy() Fix a whitespace error. Matthias Fuchs (1): Add fdt_find_and_setprop() to fdt_support.h common/cmd_fdt.c | 26 ++-- common/fdt_support.c | 73 ++++++----- include/fdt_support.h | 2 + include/libfdt.h | 323 +++++++++++++++++++++++++++++++++++++++++++++++++ libfdt/fdt_rw.c | 6 +- 5 files changed, 380 insertions(+), 50 deletions(-)

1 0

[U-Boot-Users] MII / RMII
by Guennadi Liakhovetski 08 Jan '08

08 Jan '08

Hi, 1. Does it make sense at all to define CONFIG_RMII without defining CONFIG_MII? The question is meant not really theoretical as in what meaning RMII has, rather how the macro CONFIG_RMII is supposed to be used? For example, tests like #if defined(CONFIG_MII) && defined(CONFIG_RMII) isn't checking for CONFIG_MII redundant? 2. cpu/at32ap/at32ap7000/gpio.c also tests CONFIG_RMII. at32ap is an AVR32 CPU and this macro is only defined in a few MPC8XX configurations, so, this test doesn't seem to make much sense in the current tree. 3. drivers/qe/uec_phy.c tests CONFIG_RMII_MODE, which doesn't occur anywhere else in the tree. The driver is enabled in some MPC85xx and MPC83xx configs. 4. drivers/macb.c tests for "RMII or MII mode" by jest checking #ifdef CONFIG_RMII ... #else ... #endif i.e., not for #elif defined CONFIG_MII This driver is only enabled in include/configs/atstk1002.h, which is also an AVR32 config, and it neither defines MII nor RMII. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de

7 8

[U-Boot-Users] [PATCH 2/3] ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
by Matthias Fuchs 08 Jan '08

08 Jan '08

This patch allows the use of 4xx interrupt vector number defines in board specific code outside cpu/ppc4xx. Signed-off-by: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> --- cpu/ppc4xx/4xx_enet.c | 2 +- cpu/ppc4xx/4xx_uart.c | 2 +- cpu/ppc4xx/interrupts.c | 2 +- cpu/ppc4xx/iop480_uart.c | 2 +- cpu/ppc4xx/usbdev.c | 2 +- .../vecnum.h => include/asm-ppc/ppc4xx-intvec.h | 0 6 files changed, 5 insertions(+), 5 deletions(-) rename cpu/ppc4xx/vecnum.h => include/asm-ppc/ppc4xx-intvec.h (100%) diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index bfe0864..6181c55 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -90,7 +90,7 @@ #include <405_mal.h> #include <miiphy.h> #include <malloc.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> /* * Only compile for platform with AMCC EMAC ethernet controller and diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c index ac2b12b..3d1124e 100644 --- a/cpu/ppc4xx/4xx_uart.c +++ b/cpu/ppc4xx/4xx_uart.c @@ -46,7 +46,7 @@ #include <asm/processor.h> #include <asm/io.h> #include <watchdog.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #ifdef CONFIG_SERIAL_MULTI #include <serial.h> diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 2026cc9..2f3dc32 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -34,7 +34,7 @@ #include <ppc4xx.h> #include <ppc_asm.tmpl> #include <commproc.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c index 8dd2267..3af0767 100644 --- a/cpu/ppc4xx/iop480_uart.c +++ b/cpu/ppc4xx/iop480_uart.c @@ -26,7 +26,7 @@ #include <asm/processor.h> #include <asm/io.h> #include <watchdog.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #ifdef CONFIG_SERIAL_MULTI #include <serial.h> diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c index 5924a6c..d71ba77 100644 --- a/cpu/ppc4xx/usbdev.c +++ b/cpu/ppc4xx/usbdev.c @@ -7,7 +7,7 @@ #include <usb.h> #include "usbdev.h" -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 diff --git a/cpu/ppc4xx/vecnum.h b/include/asm-ppc/ppc4xx-intvec.h similarity index 100% rename from cpu/ppc4xx/vecnum.h rename to include/asm-ppc/ppc4xx-intvec.h -- 1.5.3

1 0

[U-Boot-Users] [PATCH 3/3] ppc4xx: assign PCI interrupts on seuqoia boards
by Matthias Fuchs 08 Jan '08

08 Jan '08

Some operating systems rely on assigned PCI interrupts. Signed-off-by: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> --- board/amcc/sequoia/sequoia.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 2268bc0..e46efef 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -29,6 +29,7 @@ #include <asm/gpio.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/ppc4xx-intvec.h> DECLARE_GLOBAL_DATA_PTR; @@ -387,6 +388,16 @@ int testdram(void) } #endif +#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP) +/* + * Assign interrupts to PCI devices. + */ +void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2); +} +#endif + /************************************************************************* * pci_pre_init * @@ -438,6 +449,9 @@ int pci_pre_init(struct pci_controller *hose) addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; mtdcr(plb1_acr, addr); +#ifdef CONFIG_PCI_PNP + hose->fixup_irq = sequoia_pci_fixup_irq; +#endif return 1; } #endif /* defined(CONFIG_PCI) */ -- 1.5.3

1 0

[U-Boot-Users] [PATCH 2/3] ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
by Matthias Fuchs 08 Jan '08

08 Jan '08

This patch allows the use of 4xx interrupt vector number defines in board specific code outside cpu/ppc4xx. Signed-off-by: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> --- cpu/ppc4xx/4xx_enet.c | 2 +- cpu/ppc4xx/4xx_uart.c | 2 +- cpu/ppc4xx/interrupts.c | 2 +- cpu/ppc4xx/iop480_uart.c | 2 +- cpu/ppc4xx/usbdev.c | 2 +- cpu/ppc4xx/vecnum.h | 403 --------------------------------------- include/asm-ppc/ppc4xx-intvec.h | 403 +++++++++++++++++++++++++++++++++++++++ 7 files changed, 408 insertions(+), 408 deletions(-) delete mode 100644 cpu/ppc4xx/vecnum.h create mode 100644 include/asm-ppc/ppc4xx-intvec.h diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index bfe0864..6181c55 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -90,7 +90,7 @@ #include <405_mal.h> #include <miiphy.h> #include <malloc.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> /* * Only compile for platform with AMCC EMAC ethernet controller and diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c index ac2b12b..3d1124e 100644 --- a/cpu/ppc4xx/4xx_uart.c +++ b/cpu/ppc4xx/4xx_uart.c @@ -46,7 +46,7 @@ #include <asm/processor.h> #include <asm/io.h> #include <watchdog.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #ifdef CONFIG_SERIAL_MULTI #include <serial.h> diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 2026cc9..2f3dc32 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -34,7 +34,7 @@ #include <ppc4xx.h> #include <ppc_asm.tmpl> #include <commproc.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c index 8dd2267..3af0767 100644 --- a/cpu/ppc4xx/iop480_uart.c +++ b/cpu/ppc4xx/iop480_uart.c @@ -26,7 +26,7 @@ #include <asm/processor.h> #include <asm/io.h> #include <watchdog.h> -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #ifdef CONFIG_SERIAL_MULTI #include <serial.h> diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c index 5924a6c..d71ba77 100644 --- a/cpu/ppc4xx/usbdev.c +++ b/cpu/ppc4xx/usbdev.c @@ -7,7 +7,7 @@ #include <usb.h> #include "usbdev.h" -#include "vecnum.h" +#include <asm/ppc4xx-intvec.h> #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h deleted file mode 100644 index 8d04b69..0000000 --- a/cpu/ppc4xx/vecnum.h +++ /dev/null @@ -1,403 +0,0 @@ -/* -* Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -/* - * Interrupt vector number definitions to ease the - * 405 -- 440 porting pain ;-) - * - * NOTE: They're not all here yet ... update as needed. - * - */ - -#ifndef _VECNUMS_H_ -#define _VECNUMS_H_ - -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -/* UIC 0 */ -#define VECNUM_U0 0 /* UART 0 */ -#define VECNUM_U1 1 /* UART 1 */ -#define VECNUM_IIC0 2 /* IIC */ -#define VECNUM_KRD 3 /* Kasumi Ready for data */ -#define VECNUM_KDA 4 /* Kasumi Data Available */ -#define VECNUM_PCRW 5 /* PCI command register write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_IIC1 7 /* IIC */ -#define VECNUM_SPI 8 /* SPI */ -#define VECNUM_EPCISER 9 /* External PCI SERR */ -#define VECNUM_MTE 10 /* MAL TXEOB */ -#define VECNUM_MRE 11 /* MAL RXEOB */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_UD0 16 /* UDMA irq 0 */ -#define VECNUM_UD1 17 /* UDMA irq 1 */ -#define VECNUM_UD2 18 /* UDMA irq 2 */ -#define VECNUM_UD3 19 /* UDMA irq 3 */ -#define VECNUM_HSB2D 20 /* USB2.0 Device */ -#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */ -#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */ -#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */ -#define VECNUM_EIP94 23 /* Security EIP94 */ -#define VECNUM_ETH0 24 /* Emac 0 */ -#define VECNUM_ETH1 25 /* Emac 1 */ -#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */ -#define VECNUM_EIR4 27 /* External interrupt 4 */ -#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */ -#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ - -/* UIC 1 */ -#define VECNUM_MS (32 + 0) /* MAL SERR */ -#define VECNUM_MTDE (32 + 1) /* MAL TXDE */ -#define VECNUM_MRDE (32 + 2) /* MAL RXDE */ -#define VECNUM_U2 (32 + 3) /* UART 2 */ -#define VECNUM_U3 (32 + 4) /* UART 3 */ -#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */ -#define VECNUM_NDFC (32 + 6) /* NDFC */ -#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */ -#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */ -#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */ -#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */ -#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */ -#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */ -#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */ -#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */ -#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */ -#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */ -#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */ -#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */ -#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */ -#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */ -#define VECNUM_SRE (32 + 24) /* Serial ROM error */ -#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */ -#define VECNUM_RSVD0 (32 + 26) /* Reserved */ -#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */ -#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */ -#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ -#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */ -#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */ - -#define VECNUM_TXDE VECNUM_MTDE -#define VECNUM_RXDE VECNUM_MRDE - -/* UIC 2 */ -#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */ -#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */ -#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */ -#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */ -#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */ -#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */ -#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */ -#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */ -#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */ -#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */ - -#elif defined(CONFIG_440SPE) - -/* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_MSI0 7 /* PCI MSI level 0 */ -#define VECNUM_MSI1 8 /* PCI MSI level 0 */ -#define VECNUM_MSI2 9 /* PCI MSI level 0 */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ - -/* UIC 1 */ -#define VECNUM_MS (32 + 1 ) /* MAL SERR */ -#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */ -#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */ -#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */ -#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */ -#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ - -/* UIC 2 */ -#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */ -#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */ -#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */ -#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */ -#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */ -#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */ - -#elif defined(CONFIG_440SP) - -/* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ - -/* UIC 1 */ -#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */ -#define VECNUM_MS (32 + 1) /* MAL SERR */ -#define VECNUM_TXDE (32 + 2) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 3) /* MAL RXDE */ -#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */ -#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */ -#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */ -#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ - -#elif defined(CONFIG_440) - -/* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_MSI0 7 /* PCI MSI level 0 */ -#define VECNUM_MSI1 8 /* PCI MSI level 0 */ -#define VECNUM_MSI2 9 /* PCI MSI level 0 */ -#define VECNUM_MTE 10 /* MAL TXEOB */ -#define VECNUM_MRE 11 /* MAL RXEOB */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_CT0 18 /* GPT compare timer 0 */ -#define VECNUM_CT1 19 /* GPT compare timer 1 */ -#define VECNUM_CT2 20 /* GPT compare timer 2 */ -#define VECNUM_CT3 21 /* GPT compare timer 3 */ -#define VECNUM_CT4 22 /* GPT compare timer 4 */ -#define VECNUM_EIR0 23 /* External interrupt 0 */ -#define VECNUM_EIR1 24 /* External interrupt 1 */ -#define VECNUM_EIR2 25 /* External interrupt 2 */ -#define VECNUM_EIR3 26 /* External interrupt 3 */ -#define VECNUM_EIR4 27 /* External interrupt 4 */ -#define VECNUM_EIR5 28 /* External interrupt 5 */ -#define VECNUM_EIR6 29 /* External interrupt 6 */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ - -/* UIC 1 */ -#define VECNUM_MS (32 + 0 ) /* MAL SERR */ -#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */ -#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ - -#else /* !defined(CONFIG_440) */ - -#if defined(CONFIG_405EZ) -#define VECNUM_D0 0 /* DMA channel 0 */ -#define VECNUM_D1 1 /* DMA channel 1 */ -#define VECNUM_D2 2 /* DMA channel 2 */ -#define VECNUM_D3 3 /* DMA channel 3 */ -#define VECNUM_1588 4 /* IEEE 1588 network synchronization */ -#define VECNUM_U0 5 /* UART0 */ -#define VECNUM_U1 6 /* UART1 */ -#define VECNUM_CAN0 7 /* CAN 0 */ -#define VECNUM_CAN1 8 /* CAN 1 */ -#define VECNUM_SPI 9 /* SPI */ -#define VECNUM_IIC0 10 /* I2C */ -#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */ -#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */ -#define VECNUM_USBH1 13 /* USB Host 1 */ -#define VECNUM_USBH2 14 /* USB Host 2 */ -#define VECNUM_USBDEV 15 /* USB Device */ -#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */ -#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */ - -#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */ -#define VECNUM_MS 18 /* MAL_SERR_INT */ -#define VECNUM_TXDE 18 /* MAL_TXDE_INT */ -#define VECNUM_RXDE 18 /* MAL_RXDE_INT */ - -#define VECNUM_MTE 19 /* MAL TXEOB */ -#define VECNUM_MTE1 20 /* MAL TXEOB1 */ -#define VECNUM_MRE 21 /* MAL RXEOB */ -#define VECNUM_NAND 22 /* NAND Flash controller */ -#define VECNUM_ADC 23 /* ADC */ -#define VECNUM_DAC 24 /* DAC */ -#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */ -#define VECNUM_RESERVED0 26 /* Reserved */ -#define VECNUM_EIR0 27 /* External interrupt 0 */ -#define VECNUM_EIR1 28 /* External interrupt 1 */ -#define VECNUM_EIR2 29 /* External interrupt 2 */ -#define VECNUM_EIR3 30 /* External interrupt 3 */ -#define VECNUM_EIR4 31 /* External interrupt 4 */ - -#elif defined(CONFIG_405EX) - -/* UIC 0 */ -#define VECNUM_U0 00 -#define VECNUM_U1 01 -#define VECNUM_IIC0 02 -#define VECNUM_PKA 03 -#define VECNUM_TRNG 04 -#define VECNUM_EBM 05 -#define VECNUM_BGI 06 -#define VECNUM_IIC1 07 -#define VECNUM_SPI 08 -#define VECNUM_EIR0 09 -#define VECNUM_MTE 10 /* MAL Tx EOB */ -#define VECNUM_MRE 11 /* MAL Rx EOB */ -#define VECNUM_DMA0 12 -#define VECNUM_DMA1 13 -#define VECNUM_DMA2 14 -#define VECNUM_DMA3 15 -#define VECNUM_PCIE0AL 16 -#define VECNUM_PCIE0VPD 17 -#define VECNUM_RPCIE0HRST 18 -#define VECNUM_FPCIE0HRST 19 -#define VECNUM_PCIE0TCR 20 -#define VECNUM_PCIEMSI0 21 -#define VECNUM_PCIEMSI1 22 -#define VECNUM_SECURITY 23 -#define VECNUM_ETH0 24 -#define VECNUM_ETH1 25 -#define VECNUM_PCIEMSI2 26 -#define VECNUM_EIR4 27 -#define VECNUM_UIC2NC 28 -#define VECNUM_UIC2C 29 -#define VECNUM_UIC1NC 30 -#define VECNUM_UIC1C 31 - -/* UIC 1 */ -#define VECNUM_MS (32 + 00) /* MAL SERR */ -#define VECNUM_TXDE (32 + 01) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 02) /* MAL RXDE */ -#define VECNUM_PCIE0BMVC0 (32 + 03) -#define VECNUM_PCIE0DCRERR (32 + 04) -#define VECNUM_EBC (32 + 05) -#define VECNUM_NDFC (32 + 06) -#define VECNUM_PCEI1DCRERR (32 + 07) -#define VECNUM_CT8 (32 + 08) -#define VECNUM_CT9 (32 + 09) -#define VECNUM_PCIE1AL (32 + 10) -#define VECNUM_PCIE1VPD (32 + 11) -#define VECNUM_RPCE1HRST (32 + 12) -#define VECNUM_FPCE1HRST (32 + 13) -#define VECNUM_PCIE1TCR (32 + 14) -#define VECNUM_PCIE1VC0 (32 + 15) -#define VECNUM_CT3 (32 + 16) -#define VECNUM_CT4 (32 + 17) -#define VECNUM_EIR7 (32 + 18) -#define VECNUM_EIR8 (32 + 19) -#define VECNUM_EIR9 (32 + 20) -#define VECNUM_CT5 (32 + 21) -#define VECNUM_CT6 (32 + 22) -#define VECNUM_CT7 (32 + 23) -#define VECNUM_SROM (32 + 24) /* SERIAL ROM */ -#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */ -#define VECNUM_EIR2 (32 + 26) -#define VECNUM_EIR5 (32 + 27) -#define VECNUM_EIR6 (32 + 28) -#define VECNUM_EMAC0WAKE (32 + 29) -#define VECNUM_EIR1 (32 + 30) -#define VECNUM_EMAC1WAKE (32 + 31) - -/* UIC 2 */ -#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */ -#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */ -#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */ -#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */ -#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */ -#define VECNUM_DDRMCUE (64 + 05) -#define VECNUM_DDRMCCE (64 + 06) -#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */ -#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */ -#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */ -#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */ -#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */ -#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */ -#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */ -#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */ -#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */ -#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */ -#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */ -#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */ -#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */ -#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */ -#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */ -#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */ -#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */ -#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */ -#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */ -#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */ -#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */ -#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */ -#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */ -#define VECNUM_USBWAKE (64 + 30) /* USB wakup */ -#define VECNUM_USBOTG (64 + 31) /* USB OTG */ - -#else /* !CONFIG_405EZ */ - -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_D0 5 /* DMA channel 0 */ -#define VECNUM_D1 6 /* DMA channel 1 */ -#define VECNUM_D2 7 /* DMA channel 2 */ -#define VECNUM_D3 8 /* DMA channel 3 */ -#define VECNUM_EWU0 9 /* Ethernet wakeup */ -#define VECNUM_MS 10 /* MAL SERR */ -#define VECNUM_MTE 11 /* MAL TXEOB */ -#define VECNUM_MRE 12 /* MAL RXEOB */ -#define VECNUM_TXDE 13 /* MAL TXDE */ -#define VECNUM_RXDE 14 /* MAL RXDE */ -#define VECNUM_ETH0 15 /* Ethernet interrupt status */ -#define VECNUM_EIR0 25 /* External interrupt 0 */ -#define VECNUM_EIR1 26 /* External interrupt 1 */ -#define VECNUM_EIR2 27 /* External interrupt 2 */ -#define VECNUM_EIR3 28 /* External interrupt 3 */ -#define VECNUM_EIR4 29 /* External interrupt 4 */ -#define VECNUM_EIR5 30 /* External interrupt 5 */ -#define VECNUM_EIR6 31 /* External interrupt 6 */ -#endif /* defined(CONFIG_405EZ) */ - -#endif /* defined(CONFIG_440) */ - -#endif /* _VECNUMS_H_ */ diff --git a/include/asm-ppc/ppc4xx-intvec.h b/include/asm-ppc/ppc4xx-intvec.h new file mode 100644 index 0000000..8d04b69 --- /dev/null +++ b/include/asm-ppc/ppc4xx-intvec.h @@ -0,0 +1,403 @@ +/* +* Copyright (C) 2002 Scott McNutt <smcnutt(a)artesyncp.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +/* + * Interrupt vector number definitions to ease the + * 405 -- 440 porting pain ;-) + * + * NOTE: They're not all here yet ... update as needed. + * + */ + +#ifndef _VECNUMS_H_ +#define _VECNUMS_H_ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART 0 */ +#define VECNUM_U1 1 /* UART 1 */ +#define VECNUM_IIC0 2 /* IIC */ +#define VECNUM_KRD 3 /* Kasumi Ready for data */ +#define VECNUM_KDA 4 /* Kasumi Data Available */ +#define VECNUM_PCRW 5 /* PCI command register write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_IIC1 7 /* IIC */ +#define VECNUM_SPI 8 /* SPI */ +#define VECNUM_EPCISER 9 /* External PCI SERR */ +#define VECNUM_MTE 10 /* MAL TXEOB */ +#define VECNUM_MRE 11 /* MAL RXEOB */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UD0 16 /* UDMA irq 0 */ +#define VECNUM_UD1 17 /* UDMA irq 1 */ +#define VECNUM_UD2 18 /* UDMA irq 2 */ +#define VECNUM_UD3 19 /* UDMA irq 3 */ +#define VECNUM_HSB2D 20 /* USB2.0 Device */ +#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */ +#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */ +#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */ +#define VECNUM_EIP94 23 /* Security EIP94 */ +#define VECNUM_ETH0 24 /* Emac 0 */ +#define VECNUM_ETH1 25 /* Emac 1 */ +#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */ +#define VECNUM_EIR4 27 /* External interrupt 4 */ +#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */ +#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 0) /* MAL SERR */ +#define VECNUM_MTDE (32 + 1) /* MAL TXDE */ +#define VECNUM_MRDE (32 + 2) /* MAL RXDE */ +#define VECNUM_U2 (32 + 3) /* UART 2 */ +#define VECNUM_U3 (32 + 4) /* UART 3 */ +#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */ +#define VECNUM_NDFC (32 + 6) /* NDFC */ +#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */ +#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */ +#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */ +#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */ +#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */ +#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */ +#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */ +#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */ +#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */ +#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */ +#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */ +#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */ +#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */ +#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */ +#define VECNUM_SRE (32 + 24) /* Serial ROM error */ +#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */ +#define VECNUM_RSVD0 (32 + 26) /* Reserved */ +#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */ +#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */ +#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ +#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */ +#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */ + +#define VECNUM_TXDE VECNUM_MTDE +#define VECNUM_RXDE VECNUM_MRDE + +/* UIC 2 */ +#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */ +#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */ +#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */ +#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */ +#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */ +#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */ +#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */ +#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */ +#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */ +#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */ + +#elif defined(CONFIG_440SPE) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_MSI0 7 /* PCI MSI level 0 */ +#define VECNUM_MSI1 8 /* PCI MSI level 0 */ +#define VECNUM_MSI2 9 /* PCI MSI level 0 */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 1 ) /* MAL SERR */ +#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */ +#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */ +#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */ +#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */ +#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ + +/* UIC 2 */ +#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */ +#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */ +#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */ +#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */ +#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */ +#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */ + +#elif defined(CONFIG_440SP) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */ +#define VECNUM_MS (32 + 1) /* MAL SERR */ +#define VECNUM_TXDE (32 + 2) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 3) /* MAL RXDE */ +#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */ +#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */ +#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */ +#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ + +#elif defined(CONFIG_440) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_MSI0 7 /* PCI MSI level 0 */ +#define VECNUM_MSI1 8 /* PCI MSI level 0 */ +#define VECNUM_MSI2 9 /* PCI MSI level 0 */ +#define VECNUM_MTE 10 /* MAL TXEOB */ +#define VECNUM_MRE 11 /* MAL RXEOB */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_CT0 18 /* GPT compare timer 0 */ +#define VECNUM_CT1 19 /* GPT compare timer 1 */ +#define VECNUM_CT2 20 /* GPT compare timer 2 */ +#define VECNUM_CT3 21 /* GPT compare timer 3 */ +#define VECNUM_CT4 22 /* GPT compare timer 4 */ +#define VECNUM_EIR0 23 /* External interrupt 0 */ +#define VECNUM_EIR1 24 /* External interrupt 1 */ +#define VECNUM_EIR2 25 /* External interrupt 2 */ +#define VECNUM_EIR3 26 /* External interrupt 3 */ +#define VECNUM_EIR4 27 /* External interrupt 4 */ +#define VECNUM_EIR5 28 /* External interrupt 5 */ +#define VECNUM_EIR6 29 /* External interrupt 6 */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 0 ) /* MAL SERR */ +#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */ +#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ + +#else /* !defined(CONFIG_440) */ + +#if defined(CONFIG_405EZ) +#define VECNUM_D0 0 /* DMA channel 0 */ +#define VECNUM_D1 1 /* DMA channel 1 */ +#define VECNUM_D2 2 /* DMA channel 2 */ +#define VECNUM_D3 3 /* DMA channel 3 */ +#define VECNUM_1588 4 /* IEEE 1588 network synchronization */ +#define VECNUM_U0 5 /* UART0 */ +#define VECNUM_U1 6 /* UART1 */ +#define VECNUM_CAN0 7 /* CAN 0 */ +#define VECNUM_CAN1 8 /* CAN 1 */ +#define VECNUM_SPI 9 /* SPI */ +#define VECNUM_IIC0 10 /* I2C */ +#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */ +#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */ +#define VECNUM_USBH1 13 /* USB Host 1 */ +#define VECNUM_USBH2 14 /* USB Host 2 */ +#define VECNUM_USBDEV 15 /* USB Device */ +#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */ +#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */ + +#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */ +#define VECNUM_MS 18 /* MAL_SERR_INT */ +#define VECNUM_TXDE 18 /* MAL_TXDE_INT */ +#define VECNUM_RXDE 18 /* MAL_RXDE_INT */ + +#define VECNUM_MTE 19 /* MAL TXEOB */ +#define VECNUM_MTE1 20 /* MAL TXEOB1 */ +#define VECNUM_MRE 21 /* MAL RXEOB */ +#define VECNUM_NAND 22 /* NAND Flash controller */ +#define VECNUM_ADC 23 /* ADC */ +#define VECNUM_DAC 24 /* DAC */ +#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */ +#define VECNUM_RESERVED0 26 /* Reserved */ +#define VECNUM_EIR0 27 /* External interrupt 0 */ +#define VECNUM_EIR1 28 /* External interrupt 1 */ +#define VECNUM_EIR2 29 /* External interrupt 2 */ +#define VECNUM_EIR3 30 /* External interrupt 3 */ +#define VECNUM_EIR4 31 /* External interrupt 4 */ + +#elif defined(CONFIG_405EX) + +/* UIC 0 */ +#define VECNUM_U0 00 +#define VECNUM_U1 01 +#define VECNUM_IIC0 02 +#define VECNUM_PKA 03 +#define VECNUM_TRNG 04 +#define VECNUM_EBM 05 +#define VECNUM_BGI 06 +#define VECNUM_IIC1 07 +#define VECNUM_SPI 08 +#define VECNUM_EIR0 09 +#define VECNUM_MTE 10 /* MAL Tx EOB */ +#define VECNUM_MRE 11 /* MAL Rx EOB */ +#define VECNUM_DMA0 12 +#define VECNUM_DMA1 13 +#define VECNUM_DMA2 14 +#define VECNUM_DMA3 15 +#define VECNUM_PCIE0AL 16 +#define VECNUM_PCIE0VPD 17 +#define VECNUM_RPCIE0HRST 18 +#define VECNUM_FPCIE0HRST 19 +#define VECNUM_PCIE0TCR 20 +#define VECNUM_PCIEMSI0 21 +#define VECNUM_PCIEMSI1 22 +#define VECNUM_SECURITY 23 +#define VECNUM_ETH0 24 +#define VECNUM_ETH1 25 +#define VECNUM_PCIEMSI2 26 +#define VECNUM_EIR4 27 +#define VECNUM_UIC2NC 28 +#define VECNUM_UIC2C 29 +#define VECNUM_UIC1NC 30 +#define VECNUM_UIC1C 31 + +/* UIC 1 */ +#define VECNUM_MS (32 + 00) /* MAL SERR */ +#define VECNUM_TXDE (32 + 01) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 02) /* MAL RXDE */ +#define VECNUM_PCIE0BMVC0 (32 + 03) +#define VECNUM_PCIE0DCRERR (32 + 04) +#define VECNUM_EBC (32 + 05) +#define VECNUM_NDFC (32 + 06) +#define VECNUM_PCEI1DCRERR (32 + 07) +#define VECNUM_CT8 (32 + 08) +#define VECNUM_CT9 (32 + 09) +#define VECNUM_PCIE1AL (32 + 10) +#define VECNUM_PCIE1VPD (32 + 11) +#define VECNUM_RPCE1HRST (32 + 12) +#define VECNUM_FPCE1HRST (32 + 13) +#define VECNUM_PCIE1TCR (32 + 14) +#define VECNUM_PCIE1VC0 (32 + 15) +#define VECNUM_CT3 (32 + 16) +#define VECNUM_CT4 (32 + 17) +#define VECNUM_EIR7 (32 + 18) +#define VECNUM_EIR8 (32 + 19) +#define VECNUM_EIR9 (32 + 20) +#define VECNUM_CT5 (32 + 21) +#define VECNUM_CT6 (32 + 22) +#define VECNUM_CT7 (32 + 23) +#define VECNUM_SROM (32 + 24) /* SERIAL ROM */ +#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */ +#define VECNUM_EIR2 (32 + 26) +#define VECNUM_EIR5 (32 + 27) +#define VECNUM_EIR6 (32 + 28) +#define VECNUM_EMAC0WAKE (32 + 29) +#define VECNUM_EIR1 (32 + 30) +#define VECNUM_EMAC1WAKE (32 + 31) + +/* UIC 2 */ +#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */ +#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */ +#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */ +#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */ +#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */ +#define VECNUM_DDRMCUE (64 + 05) +#define VECNUM_DDRMCCE (64 + 06) +#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */ +#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */ +#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */ +#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */ +#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */ +#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */ +#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */ +#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */ +#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */ +#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */ +#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */ +#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */ +#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */ +#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */ +#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */ +#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */ +#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */ +#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */ +#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */ +#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */ +#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */ +#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */ +#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */ +#define VECNUM_USBWAKE (64 + 30) /* USB wakup */ +#define VECNUM_USBOTG (64 + 31) /* USB OTG */ + +#else /* !CONFIG_405EZ */ + +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_D0 5 /* DMA channel 0 */ +#define VECNUM_D1 6 /* DMA channel 1 */ +#define VECNUM_D2 7 /* DMA channel 2 */ +#define VECNUM_D3 8 /* DMA channel 3 */ +#define VECNUM_EWU0 9 /* Ethernet wakeup */ +#define VECNUM_MS 10 /* MAL SERR */ +#define VECNUM_MTE 11 /* MAL TXEOB */ +#define VECNUM_MRE 12 /* MAL RXEOB */ +#define VECNUM_TXDE 13 /* MAL TXDE */ +#define VECNUM_RXDE 14 /* MAL RXDE */ +#define VECNUM_ETH0 15 /* Ethernet interrupt status */ +#define VECNUM_EIR0 25 /* External interrupt 0 */ +#define VECNUM_EIR1 26 /* External interrupt 1 */ +#define VECNUM_EIR2 27 /* External interrupt 2 */ +#define VECNUM_EIR3 28 /* External interrupt 3 */ +#define VECNUM_EIR4 29 /* External interrupt 4 */ +#define VECNUM_EIR5 30 /* External interrupt 5 */ +#define VECNUM_EIR6 31 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ + +#endif /* defined(CONFIG_440) */ + +#endif /* _VECNUMS_H_ */ -- 1.5.3

1 0

[U-Boot-Users] [PATCH 1/3] ppc4xx: Fix UIC2 vector number base
by Matthias Fuchs 08 Jan '08

08 Jan '08

Signed-off-by: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> --- cpu/ppc4xx/vecnum.h | 32 ++++++++++++++++---------------- 1 files changed, 16 insertions(+), 16 deletions(-) diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h index 93e51b9..8d04b69 100644 --- a/cpu/ppc4xx/vecnum.h +++ b/cpu/ppc4xx/vecnum.h @@ -106,16 +106,16 @@ #define VECNUM_RXDE VECNUM_MRDE /* UIC 2 */ -#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */ -#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */ -#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */ -#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */ -#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */ -#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */ -#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */ -#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */ -#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */ -#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */ +#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */ +#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */ +#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */ +#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */ +#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */ +#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */ +#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */ +#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */ +#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */ +#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */ #elif defined(CONFIG_440SPE) @@ -152,12 +152,12 @@ #define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ /* UIC 2 */ -#define VECNUM_EIR5 (62 + 24) /* External interrupt 5 */ -#define VECNUM_EIR4 (62 + 25) /* External interrupt 4 */ -#define VECNUM_EIR3 (62 + 26) /* External interrupt 3 */ -#define VECNUM_EIR2 (62 + 27) /* External interrupt 2 */ -#define VECNUM_EIR1 (62 + 28) /* External interrupt 1 */ -#define VECNUM_EIR0 (62 + 29) /* External interrupt 0 */ +#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */ +#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */ +#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */ +#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */ +#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */ +#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */ #elif defined(CONFIG_440SP) -- 1.5.3

1 0

[U-Boot-Users] Pull request: net
by Ben Warren 08 Jan '08

08 Jan '08

Wolfgang, Please pull from the net repo. In particular, the patch by Rafal Jaworowski is needed for further work that he wishes to submit. The following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74: Jon Loeliger (1): 8610: Move include of config.h earlier. are available in the git repository at: git://www.denx.de/git/u-boot-net.git master Matthias Fuchs (1): net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option Rafal Jaworowski (1): Introduce new eth_receive routine Shinya Kuribayashi (1): net/eth.c: Fix env_enetaddr signed overflow Upakul Barkakaty (1): NET: Proper return code handling in eth_init() function in file eth.c include/net.h | 3 ++ net/eth.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++++---- net/net.c | 12 ++++++++++ 3 files changed, 79 insertions(+), 5 deletions(-)

2 1

[U-Boot-Users] [PATCH] ppc4xx: Update PLB/PCI divider for PMC440 board
by Matthias Fuchs 08 Jan '08

08 Jan '08

This patch updates the PLB/PCI divider when running at 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock. Signed-off-by: Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> --- board/esd/pmc440/cmd_pmc440.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index d588d8c..350af48 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -280,10 +280,10 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] if (argc > 1) { if (!strcmp(argv[1], "400")) { - /* PLB=133MHz, PLB/PCI=4 */ + /* PLB=133MHz, PLB/PCI=3 */ printf("Bootstrapping for 400MHz\n"); sdsdp[0]=0x8678624e; - sdsdp[1]=0x0947a030; + sdsdp[1]=0x095fa030; sdsdp[2]=0x40082350; sdsdp[3]=0x0d050000; } else if (!strcmp(argv[1], "533")) { -- 1.5.3

1 0