September 2007 - U-Boot

[U-Boot-Users] U-boot
by Binay Kumar 18 Sep '07

18 Sep '07

Hi All, I want boot my PC i.e pentium 4 with U-Boot.Is it possible if yes how?Can u pls. explanin me in detail. Regards Binay

2 1

[U-Boot-Users] [PATCH 6/6] mpc83xx: update the CREDITS and MAINTAINERS
by Dave Liu 18 Sep '07

18 Sep '07

update the CREDITS and MAINTAINERS. Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- CREDITS | 5 +++++ MAINTAINERS | 1 + 2 files changed, 6 insertions(+), 0 deletions(-) diff --git a/CREDITS b/CREDITS index 0953e7b..b21d60a 100644 --- a/CREDITS +++ b/CREDITS @@ -303,6 +303,11 @@ D: Support for Nios Stratix Development Kit (DK-1S10) D: Support for SSV ADNP/ESC1 (Nios Cyclone) W: http://www.li-pro.net +N: Dave Liu +E: daveliu(a)freescale.com +D: Support for MPC832x, MPC8360, MPC837x +W: www.freescale.com + N: Raymond Lo E: lo(a)routefree.com D: Support for DOS partitions diff --git a/MAINTAINERS b/MAINTAINERS index 850438d..a920e80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -223,6 +223,7 @@ The LEOX team <team(a)leox.org> Dave Liu <daveliu(a)freescale.com> + MPC832XEMDS MPC832x MPC8360EMDS MPC8360 MPC837XEMDS MPC837x -- 1.5.1

1 0

[U-Boot-Users] [PATCH 5/6] mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
by Dave Liu 18 Sep '07

18 Sep '07

Add the MAINTAINER and MAKEALL entries for mpc837xemds Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- MAINTAINERS | 1 + MAKEALL | 1 + 2 files changed, 2 insertions(+), 0 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b8c1fdc..850438d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -224,6 +224,7 @@ The LEOX team <team(a)leox.org> Dave Liu <daveliu(a)freescale.com> MPC8360EMDS MPC8360 + MPC837XEMDS MPC837x Nye Liu <nyet(a)zumanetworks.com> diff --git a/MAKEALL b/MAKEALL index 2597d1f..d2a2ad7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -305,6 +305,7 @@ LIST_83xx=" \ MPC8349ITX \ MPC8349ITXGP \ MPC8360EMDS \ + MPC837XEMDS \ sbc8349 \ TQM834x \ " -- 1.5.1

1 0

[U-Boot-Users] [PATCH 4/6] mpc83xx: Add the MPC837xEMDS board readme
by Dave Liu 18 Sep '07

18 Sep '07

Add the README.mpc837xemds to /doc Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- doc/README.mpc837xemds | 104 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 104 insertions(+), 0 deletions(-) create mode 100644 doc/README.mpc837xemds diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds new file mode 100644 index 0000000..3f0cdf7 --- /dev/null +++ b/doc/README.mpc837xemds @@ -0,0 +1,104 @@ +Freescale MPC837xEMDS Board +----------------------------------------- +1. Board Switches and Jumpers +1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board + For some reason, the HW designers describe the switch settings + in terms of 0 and 1, and then map that to physical switches where + the label "On" refers to logic 0 and "Off" is logic 1. + + Switch bits are numbered 1 through, like, 4 6 8 or 10, but the + bits may contribute to signals that are numbered based at 0, + and some of those signals may be high-bit-number-0 too. Heed + well the names and labels and do not get confused. + + "Off" == 1 + "On" == 0 + + SW4[8] is the bit labled 8 on Switch 4. + SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. + SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On" + and bits labeled 8 is set as "Off". + +1.1 For the MPC837xEMDS Processor Board + + First, make sure the board default setting is consistent with the + document shipped with your board. Then apply the following setting: + SW3[1-8]= 0011_0000 (BOOTSEQ, ROMLOC setting) + SW4[1-8]= 0000_0110 (core PLL setting) + SW5[1-8]= 1001_1000 (system PLL, boot up from low end of flash) + SW6[1-8]= 0000_1000 (HRCW is read from NOR FLASH) + SW7[1-8]= 0110_1101 (TSEC1/2 interface setting - RGMII) + J3 2-3, TSEC1 LVDD1 with 2.5V + J6 2-3, TSEC2 LVDD2 with 2.5V + J9 2-3, CLKIN from osc on board + J10 removed, CS0 connect to NOR flash; when mounted, CS0 connect to NAND + J11 removed, Hardware Reset Configuration Word load from FLASH(NOR or NAND) + mounted, HRCW load from BCSR. + + on board Oscillator: 66M + +2. Memory Map + +2.1. The memory map should look pretty much like this: + + 0x0000_0000 0x7fff_ffff DDR 2G + 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M + 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M + 0xc000_0000 0xdfff_ffff Empty 512M + 0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M + 0xe010_0000 0xe02f_ffff Empty 2M + 0xe030_0000 0xe03f_ffff PCI IO 1M + 0xe040_0000 0xe05f_ffff Empty 2M + 0xe060_0000 0xe060_8000 NAND Flash 32K + 0xf400_0000 0xf7ff_ffff Empty 64M + 0xf800_0000 0xf800_7fff BCSR on CS1 32K + 0xfe00_0000 0xffff_ffff NOR Flash on CS0 32M + +3. Definitions + +3.1 Explanation of NEW definitions in: + + include/configs/MPC837XEMDS.h + + CONFIG_MPC83XX MPC83xx family for both MPC837x and MPC8360 + CONFIG_MPC837X MPC837x specific + CONFIG_MPC837XEMDS MPC837XEMDS board specific + +4. Compilation + + Assuming you're using BASH shell: + + export CROSS_COMPILE=your-cross-compile-prefix + cd u-boot + make distclean + make MPC837XEMDS_config + make + +5. Downloading and Flashing Images + +5.0 Download over serial line using Kermit: + + loadb + [Drop to kermit: + ^\c + send <u-boot-bin-image> + c + ] + + + Or via tftp: + + tftp 40000 u-boot.bin + +5.1 Reflash U-boot Image using U-boot + + tftp 40000 u-boot.bin + protect off fe000000 fe1fffff + erase fe000000 fe1fffff + + cp.b 40000 fe000000 xxxx + +You have to supply the correct byte count with 'xxxx' from the TFTP result log. + +6. Notes + 1) The console baudrate for MPC837XEMDS is 115200bps. -- 1.5.1

1 0

[U-Boot-Users] [PATCH 3/6] mpc83xx: Add the support of MPC837xEMDS board
by Dave Liu 18 Sep '07

18 Sep '07

The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- Makefile | 10 + board/freescale/mpc837xemds/Makefile | 50 +++ board/freescale/mpc837xemds/config.mk | 28 ++ board/freescale/mpc837xemds/mpc837xemds.c | 144 +++++++ board/freescale/mpc837xemds/pci.c | 65 +++ cpu/mpc83xx/cpu_init.c | 6 +- cpu/mpc83xx/spd_sdram.c | 7 +- drivers/tsec.c | 10 + include/configs/MPC837XEMDS.h | 605 +++++++++++++++++++++++++++++ 9 files changed, 922 insertions(+), 3 deletions(-) create mode 100644 board/freescale/mpc837xemds/Makefile create mode 100644 board/freescale/mpc837xemds/config.mk create mode 100644 board/freescale/mpc837xemds/mpc837xemds.c create mode 100644 board/freescale/mpc837xemds/pci.c create mode 100644 include/configs/MPC837XEMDS.h diff --git a/Makefile b/Makefile index 85885b1..f33302f 100644 --- a/Makefile +++ b/Makefile @@ -1829,6 +1829,16 @@ MPC8360EMDS_SLAVE_config: unconfig fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale +MPC837XEMDS_config \ +MPC837XEMDS_HOST_config: unconfig + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _HOST_,$@)" ] ; then \ + echo -n "... PCI HOST " ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ + fi ; + @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale + sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/freescale/mpc837xemds/Makefile b/board/freescale/mpc837xemds/Makefile new file mode 100644 index 0000000..5ec7a87 --- /dev/null +++ b/board/freescale/mpc837xemds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc837xemds/config.mk b/board/freescale/mpc837xemds/config.mk new file mode 100644 index 0000000..63c5fc3 --- /dev/null +++ b/board/freescale/mpc837xemds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC837xEMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c new file mode 100644 index 0000000..0e4ec02 --- /dev/null +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Dave Liu <daveliu(a)freescale.com> + * + * CREDITS: Kim Phillips contribute to LIBFDT code + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <i2c.h> +#include <spd.h> +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +int board_early_init_f(void) +{ + u8 *bcsr = (u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[0x9] &= ~0x04; + /* Clear all of the interrupt of BCSR */ + bcsr[0xe] = 0xff; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* Initialize DDR ECC byte */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* return total bus DDR size(bytes) */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + +#if (CFG_DDR_SIZE != 512) +#warning Currenly any ddr size other than 512 is not supported +#endif + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + udelay(50000); + + im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + udelay(1000); + + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + udelay(1000); + + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__("sync"); + udelay(1000); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + udelay(2000); + return CFG_DDR_SIZE; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC837xEMDS\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c new file mode 100644 index 0000000..ab90979 --- /dev/null +++ b/board/freescale/mpc837xemds/pci.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <asm/mmu.h> +#include <asm/io.h> +#include <common.h> +#include <mpc83xx.h> +#include <pci.h> +#include <i2c.h> +#include <asm/fsl_i2c.h> + +#if defined(CONFIG_PCI) +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI_MEM_BASE, + phys_start: CFG_PCI_MEM_PHYS, + size: CFG_PCI_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI_MMIO_BASE, + phys_start: CFG_PCI_MMIO_PHYS, + size: CFG_PCI_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI_IO_BASE, + phys_start: CFG_PCI_IO_PHYS, + size: CFG_PCI_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + + /* Enable all 5 PCI_CLK_OUTPUTS */ + clk->occr |= 0xf8000000; + udelay(2000); + + /* Configure PCI Local Access Windows */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + udelay(2000); + + mpc83xx_pci_init(1, reg, 0); +} +#endif /* CONFIG_PCI */ diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 7224979..2b92be0 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -155,6 +155,10 @@ void cpu_init_f (volatile immap_t * im) #ifdef CFG_DDRCDR im->sysconf.ddrcdr = CFG_DDRCDR; #endif + /* Output buffer impedance register */ +#ifdef CFG_OBIR + im->sysconf.obir = CFG_OBIR; +#endif #ifdef CONFIG_QE /* Config QE ioports */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index ee2d038..29dd470 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 Freescale Semiconductor, Inc. + * (C) Copyright 2006-2007 Freescale Semiconductor, Inc. * * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. @@ -198,6 +198,7 @@ long int spd_sdram() if(spd.mem_type == SPD_MEMTYPE_DDR2) { immap->sysconf.ddrcdr = CFG_DDRCDR_VALUE; } + udelay(50000); #endif /* @@ -576,7 +577,7 @@ long int spd_sdram() if (effective_data_rate == 266 || effective_data_rate == 333) { cpo = 0x7; /* READ_LAT + 5/4 */ } else if (effective_data_rate == 400) { - cpo = 0x9; /* READ_LAT + 7/4 */ + cpo = 0x7; /* READ_LAT + 5/4 */ } else { /* Automatic calibration */ cpo = 0x1f; @@ -705,9 +706,11 @@ long int spd_sdram() * SDRAM Cfg 2 */ odt_cfg = 0; +#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU if (odt_rd_cfg | odt_wr_cfg) { odt_cfg = 0x2; /* ODT to IOs during reads */ } +#endif if (spd.mem_type == SPD_MEMTYPE_DDR2) { ddr->sdram_cfg2 = (0 | (0 << 26) /* True DQS */ diff --git a/drivers/tsec.c b/drivers/tsec.c index 4ff3339..8426857 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -671,6 +671,15 @@ uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv) return MIIM_CIS8204_EPHYCON_INIT; } +uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv) +{ + uint mii_data = read_phy_reg(priv, mii_reg); + + if (priv->flags & TSEC_REDUCED) + mii_data = (mii_data & 0xfff0) | 0x000b; + return mii_data; +} + /* Initialized required registers to appropriate values, zeroing * those we don't care about (unless zero is bad, in which case, * choose a more appropriate value) @@ -1030,6 +1039,7 @@ struct phy_info phy_info_M88E1111S = { (struct phy_cmd[]){ /* config */ /* Reset and configure the PHY */ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {0x1b, 0x848f, &mii_m88e1111s_setmode}, {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h new file mode 100644 index 0000000..7e34492 --- /dev/null +++ b/include/configs/MPC837XEMDS.h @@ -0,0 +1,605 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Dave Liu <daveliu(a)freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC837X 1 /* MPC837X CPU specific */ +#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + * if CLKIN is 66MHz, then + * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_SVCOD_DIV_2 |\ + HRCWL_CSB_TO_CLKIN_6X1 |\ + HRCWL_CORE_TO_CSB_1_5X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LDP_CLEAR) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LDP_CLEAR) +#endif + +/* + * eTSEC Clock Config + */ +#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ +#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ + +/* + * System IO Config + */ +#define CFG_SICRH 0x00000000 +#define CFG_SICRL 0x00000000 + +/* + * Output Buffer Impedance + */ +#define CFG_OBIR 0x31100000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 +#define CFG_83XX_DDR_USES_CS0 +#define CFG_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */ + +#undef CONFIG_DDR_ECC /* support DDR ECC function */ +#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ + +#if defined(CONFIG_SPD_EEPROM) +#define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */ +#else +/* + * Manually set up DDR parameters + * WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM + * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5 + */ +#define CFG_DDR_SIZE 512 /* MB */ +#define CFG_DDR_CS0_BNDS 0x0000001f +#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \ + | 0x00010000 /* ODT_WR to CSn */ \ + | CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 ) + /* 0x80010202 */ +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00620802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | ( 6 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x231088c8 */ +#define CFG_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03E00100 */ +#define CFG_DDR_SDRAM_CFG 0x43000000 +#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ +#define CFG_DDR_MODE ( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x1432 << SDRAM_MODE_SD_SHIFT ) ) + /* ODT 150ohm CL=3, AL=2 on SDRAM */ +#define CFG_DDR_MODE2 0x00000000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00040000 /* memtest region */ +#define CFG_MEMTEST_END 0x00140000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * NAND Flash on the Local Bus + */ +#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CFG_BR3_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ + +#define CFG_LBLAWBAR3_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 + +#define OF_CPU "PowerPC,837x@0" +#define OF_SOC "soc837x@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc837x@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + +#ifdef CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */ +#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#endif /* CONFIG_PCI */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * TSEC + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) + +/* + * TSEC ethernet configuration + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 3 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "eTSEC1" + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if defined(CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_SDRAM_LOWER CFG_SDRAM_BASE +#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000) + +#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT3U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_ETHADDR 00:E0:0C:00:83:79 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:83:78 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc837xemds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ -- 1.5.1

1 0

[U-Boot-Users] [PATCH 2/6] mpc83xx: Add the support of MPC8315E SoC
by Dave Liu 18 Sep '07

18 Sep '07

The MPC8315E SoC including e300c3 core and new IP blocks, such as TDM, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- cpu/mpc83xx/cpu.c | 12 +++++ cpu/mpc83xx/speed.c | 40 ++++++++++++++++- include/asm-ppc/global_data.h | 5 ++ include/asm-ppc/immap_83xx.h | 61 ++++++++++++++++++++++++++- include/mpc83xx.h | 93 ++++++++++++++++++++++++++++++++++++++--- 5 files changed, 201 insertions(+), 10 deletions(-) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 5adb4d4..3c19e8d 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -152,6 +152,18 @@ int checkcpu(void) case SPR_8313E_REV10: puts("MPC8313E, "); break; + case SPR_8315E_REV10: + puts("MPC8315E, "); + break; + case SPR_8315_REV10: + puts("MPC8315, "); + break; + case SPR_8314E_REV10: + puts("MPC8314E, "); + break; + case SPR_8314_REV10: + puts("MPC8314, "); + break; case SPR_8379E_REV10: puts("MPC8379E, "); break; diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 23dfb30..4f5a866 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -113,6 +113,9 @@ int get_clocks(void) #if !defined(CONFIG_MPC832X) u32 i2c2_clk; #endif +#if defined(CONFIG_MPC8315) + u32 tdm_clk; +#endif #if defined(CONFIG_MPC837X) u32 sdhc_clk; #endif @@ -132,6 +135,8 @@ int get_clocks(void) #if defined(CONFIG_MPC837X) u32 pciexp1_clk; u32 pciexp2_clk; +#endif +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) u32 sata_clk; #endif @@ -197,7 +202,7 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -215,7 +220,7 @@ int get_clocks(void) /* unkown SCCR_TSEC2CM value */ return -4; } -#elif defined(CONFIG_MPC831X) +#elif defined(CONFIG_MPC8313) tsec2_clk = tsec1_clk; if (!(sccr & SCCR_TSEC1ON)) @@ -288,6 +293,25 @@ int get_clocks(void) return -8; } #endif +#if defined(CONFIG_MPC8315) + switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) { + case 0: + tdm_clk = 0; + break; + case 1: + tdm_clk = csb_clk; + break; + case 2: + tdm_clk = csb_clk / 2; + break; + case 3: + tdm_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_TDMCM value */ + return -8; + } +#endif #if defined(CONFIG_MPC834X) i2c1_clk = tsec2_clk; @@ -342,7 +366,7 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC837X) +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) { case 0: sata_clk = 0; @@ -428,6 +452,9 @@ int get_clocks(void) #if defined(CONFIG_MPC834X) gd->usbmph_clk = usbmph_clk; #endif +#if defined(CONFIG_MPC8315) + gd->tdm_clk = tdm_clk; +#endif #if defined(CONFIG_MPC837X) gd->sdhc_clk = sdhc_clk; #endif @@ -450,6 +477,8 @@ int get_clocks(void) #if defined(CONFIG_MPC837X) gd->pciexp1_clk = pciexp1_clk; gd->pciexp2_clk = pciexp2_clk; +#endif +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) gd->sata_clk = sata_clk; #endif gd->pci_clk = pci_sync_in; @@ -488,6 +517,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if !defined(CONFIG_MPC832X) printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); #endif +#if defined(CONFIG_MPC8315) + printf(" TDM: %4d MHz\n", gd->tdm_clk / 1000000); +#endif #if defined(CONFIG_MPC837X) printf(" SDHC: %4d MHz\n", gd->sdhc_clk / 1000000); #endif @@ -502,6 +534,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_MPC837X) printf(" PCIEXP1: %4d MHz\n", gd->pciexp1_clk / 1000000); printf(" PCIEXP2: %4d MHz\n", gd->pciexp2_clk / 1000000); +#endif +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) printf(" SATA: %4d MHz\n", gd->sata_clk / 1000000); #endif return 0; diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index fab1117..6e8193c 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -63,6 +63,9 @@ typedef struct global_data { #if defined (CONFIG_MPC834X) u32 usbmph_clk; #endif /* CONFIG_MPC834X */ +#if defined(CONFIG_MPC815) + u32 tdm_clk; +#endif #if defined(CONFIG_MPC837X) u32 sdhc_clk; #endif @@ -77,6 +80,8 @@ typedef struct global_data { #if defined(CONFIG_MPC837X) u32 pciexp1_clk; u32 pciexp2_clk; +#endif +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) u32 sata_clk; #endif #if defined(CONFIG_MPC8360) diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 7517111..34ea295 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -589,6 +589,20 @@ typedef struct rom83xx { u8 mem[0x10000]; } rom83xx_t; +/* + * TDM + */ +typedef struct tdm83xx { + u8 fixme[0x200]; +} tdm83xx_t; + +/* + * TDM DMAC + */ +typedef struct tdmdmac83xx { + u8 fixme[0x2000]; +} tdmdmac83xx_t; + #if defined(CONFIG_MPC834X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ @@ -626,7 +640,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#elif defined(CONFIG_MPC831X) +#elif defined(CONFIG_MPC8313) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -661,6 +675,51 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; +#elif defined(CONFIG_MPC8315) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[1]; /* General purpose I/O module */ + u8 res0[0x1300]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0xa00]; + pex83xx_t pciexp[2]; /* PCI Express Controller */ + u8 res6[0xb000]; + tdm83xx_t tdm; /* TDM Controller */ + u8 res7[0x1e00]; + sata83xx_t sata[2]; /* SATA Controller */ + u8 res8[0x9000]; + usb83xx_t usb[1]; /* USB DR Controller */ + tsec83xx_t tsec[2]; + u8 res9[0x6000]; + tdmdmac83xx_t tdmdmac; /* TDM DMAC */ + u8 res10[0x2000]; + security83xx_t security; + u8 res11[0xA3000]; + serdes83xx_t serdes[1]; /* SerDes Registers */ + u8 res12[0x1CF00]; +} immap_t; + #elif defined(CONFIG_MPC837X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4c23094..dba1aea 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -102,6 +102,10 @@ #define SPR_8313_REV10 0x80B10010 #define SPR_8311E_REV10 0x80B20010 #define SPR_8311_REV10 0x80B30010 +#define SPR_8315E_REV10 0x80B40010 +#define SPR_8315_REV10 0x80B50010 +#define SPR_8314E_REV10 0x80B60010 +#define SPR_8314_REV10 0x80B70010 #define SPR_8379E_REV10 0x80C20010 #define SPR_8379_REV10 0x80C30010 @@ -220,8 +224,8 @@ #define SICRL_URT_CTPR 0x06000000 #define SICRL_IRQ_CTPR 0x00C00000 -#elif defined(CONFIG_MPC831X) -/* SICRL bits - MPC831x specific */ +#elif defined(CONFIG_MPC8313) +/* SICRL bits - MPC8313 specific */ #define SICRL_LBC 0x30000000 #define SICRL_UART 0x0C000000 #define SICRL_SPI_A 0x03000000 @@ -232,7 +236,7 @@ #define SICRL_ETSEC1_A 0x0000000C #define SICRL_ETSEC2_A 0x00000003 -/* SICRH bits - MPC831x specific */ +/* SICRH bits - MPC8313 specific */ #define SICRH_INTR_A 0x02000000 #define SICRH_INTR_B 0x00C00000 #define SICRH_IIC 0x00300000 @@ -249,6 +253,41 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 +#elif defined(CONFIG_MPC8315) +/* SICRL bits - MPC8315 specific */ +#define SICRL_DMA_CH0 0xc0000000 +#define SICRL_DMA_SPI 0x30000000 +#define SICRL_UART 0x0c000000 +#define SICRL_IRQ4 0x02000000 +#define SICRL_IRQ5 0x01800000 +#define SICRL_IRQ6_7 0x00400000 +#define SICRL_IIC1 0x00300000 +#define SICRL_TDM 0x000c0000 +#define SICRL_TDM_SHARED 0x00030000 +#define SICRL_PCI_A 0x0000c000 +#define SICRL_ELBC_A 0x00003000 +#define SICRL_ETSEC1_A 0x000000c0 +#define SICRL_ETSEC1_B 0x00000030 +#define SICRL_ETSEC1_C 0x0000000c +#define SICRL_TSEXPOBI 0x00000001 + +/* SICRH bits - MPC8315 specific */ +#define SICRH_GPIO_0 0xc0000000 +#define SICRH_GPIO_1 0x30000000 +#define SICRH_GPIO_2 0x0c000000 +#define SICRH_GPIO_3 0x03000000 +#define SICRH_GPIO_4 0x00c00000 +#define SICRH_GPIO_5 0x00300000 +#define SICRH_GPIO_6 0x000c0000 +#define SICRH_GPIO_7 0x00030000 +#define SICRH_GPIO_8 0x0000c000 +#define SICRH_GPIO_9 0x00003000 +#define SICRH_GPIO_10 0x00000c00 +#define SICRH_GPIO_11 0x00000300 +#define SICRH_ETSEC2_A 0x000000c0 +#define SICRH_TSOBI1 0x00000002 +#define SICRH_TSOBI2 0x00000001 + #elif defined(CONFIG_MPC837X) /* SICRL bits - MPC837x specific */ #define SICRL_USB_A 0xC0000000 @@ -447,7 +486,7 @@ #define HRCWL_CE_TO_PLL_1X30 0x0000001E #define HRCWL_CE_TO_PLL_1X31 0x0000001F -#elif defined(CONFIG_MPC837X) +#elif defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) #define HRCWL_SVCOD 0x30000000 #define HRCWL_SVCOD_SHIFT 28 #define HRCWL_SVCOD_DIV_4 0x00000000 @@ -556,7 +595,7 @@ /* RSR - Reset Status Register */ -#if defined(CONFIG_MPC837X) +#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) #define RSR_RSTSRC 0xF0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 28 #else @@ -677,7 +716,7 @@ #define SCCR_USBCM_2 0x00A00000 #define SCCR_USBCM_3 0x00F00000 -#elif defined(CONFIG_MPC831X) +#elif defined(CONFIG_MPC8313) /* TSEC1 bits are for TSEC2 as well */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 @@ -697,6 +736,48 @@ #define SCCR_USBDRCM_2 0x00200000 #define SCCR_USBDRCM_3 0x00300000 +#elif defined(CONFIG_MPC8315) +/* SCCR bits - MPC8315 specific */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC2CM 0x30000000 +#define SCCR_TSEC2CM_SHIFT 28 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 + +#define SCCR_USBDRCM 0x00300000 +#define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00100000 +#define SCCR_USBDRCM_2 0x00200000 +#define SCCR_USBDRCM_3 0x00300000 + +#define SCCR_PCIEXP1CM 0x00080000 +#define SCCR_PCIEXP2CM 0x00040000 + +#define SCCR_SATA1CM 0x0000c000 +#define SCCR_SATA1CM_SHIFT 14 +#define SCCR_SATACM 0x0000f000 +#define SCCR_SATACM_SHIFT 8 +#define SCCR_SATACM_0 0x00000000 +#define SCCR_SATACM_1 0x00005000 +#define SCCR_SATACM_2 0x0000a000 +#define SCCR_SATACM_3 0x0000f000 + +#define SCCR_TDMCM 0x000000c0 +#define SCCR_TDMCM_SHIFT 6 +#define SCCR_TDMCM_0 0x00000000 +#define SCCR_TDMCM_1 0x00000040 +#define SCCR_TDMCM_2 0x00000080 +#define SCCR_TDMCM_3 0x000000c0 + #elif defined(CONFIG_MPC837X) /* SCCR bits - MPC837x specific */ #define SCCR_TSEC1CM 0xc0000000 -- 1.5.1

1 0

[U-Boot-Users] [PATCH 1/6] mpc83xx: Add the support of MPC837x SoC
by Dave Liu 18 Sep '07

18 Sep '07

The MPC837x SoC including e300c4 core and new IP blocks, such as SDHC, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- cpu/mpc83xx/cpu.c | 24 ++++++- cpu/mpc83xx/speed.c | 167 ++++++++++++++++++++++++++++++++------- include/asm-ppc/global_data.h | 10 ++- include/asm-ppc/immap_83xx.h | 84 +++++++++++++++++++- include/mpc83xx.h | 174 ++++++++++++++++++++++++++++++++++++----- 5 files changed, 406 insertions(+), 53 deletions(-) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e634f0a..5adb4d4 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -64,6 +64,10 @@ int checkcpu(void) printf("e300c3, "); break; + case PVR_E300C4: + printf("e300c4, "); + break; + default: printf("Unknown core, "); } @@ -148,6 +152,24 @@ int checkcpu(void) case SPR_8313E_REV10: puts("MPC8313E, "); break; + case SPR_8379E_REV10: + puts("MPC8379E, "); + break; + case SPR_8379_REV10: + puts("MPC8379, "); + break; + case SPR_8378E_REV10: + puts("MPC8378E, "); + break; + case SPR_8378_REV10: + puts("MPC8378, "); + break; + case SPR_8377E_REV10: + puts("MPC8377E, "); + break; + case SPR_8377_REV10: + puts("MPC8377, "); + break; default: printf("Rev: Unknown revision number:%08x\n" "Warning: Unsupported cpu revision!\n",spridr); diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index cba57fa..23dfb30 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2002 * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. * - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -100,7 +100,7 @@ int get_clocks(void) u32 lcrr; u32 csb_clk; -#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; @@ -113,6 +113,9 @@ int get_clocks(void) #if !defined(CONFIG_MPC832X) u32 i2c2_clk; #endif +#if defined(CONFIG_MPC837X) + u32 sdhc_clk; +#endif u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; @@ -126,6 +129,11 @@ int get_clocks(void) u32 qe_clk; u32 brg_clk; #endif +#if defined(CONFIG_MPC837X) + u32 pciexp1_clk; + u32 pciexp2_clk; + u32 sata_clk; +#endif if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; @@ -151,7 +159,7 @@ int get_clocks(void) sccr = im->clk.sccr; -#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -167,7 +175,7 @@ int get_clocks(void) break; default: /* unkown SCCR_TSEC1CM value */ - return -4; + return -2; } switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { @@ -185,11 +193,11 @@ int get_clocks(void) break; default: /* unkown SCCR_USBDRCM value */ - return -8; + return -3; } #endif -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -205,11 +213,18 @@ int get_clocks(void) break; default: /* unkown SCCR_TSEC2CM value */ - return -5; + return -4; } +#elif defined(CONFIG_MPC831X) + tsec2_clk = tsec1_clk; - i2c1_clk = tsec2_clk; + if (!(sccr & SCCR_TSEC1ON)) + tsec1_clk = 0; + if (!(sccr & SCCR_TSEC2ON)) + tsec2_clk = 0; +#endif +#if defined(CONFIG_MPC834X) switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) { case 0: usbmph_clk = 0; @@ -225,7 +240,7 @@ int get_clocks(void) break; default: /* unkown SCCR_USBMPHCM value */ - return -7; + return -5; } if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { @@ -233,42 +248,120 @@ int get_clocks(void) * USB DR clock is not disabled then * USB MPH & USB DR must have the same rate */ - return -9; + return -6; + } +#endif + switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { + case 0: + enc_clk = 0; + break; + case 1: + enc_clk = csb_clk; + break; + case 2: + enc_clk = csb_clk / 2; + break; + case 3: + enc_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_ENCCM value */ + return -7; } -#elif defined(CONFIG_MPC831X) - tsec2_clk = tsec1_clk; - if (!(sccr & SCCR_TSEC1ON)) - tsec1_clk = 0; - if (!(sccr & SCCR_TSEC2ON)) - tsec2_clk = 0; +#if defined(CONFIG_MPC837X) + switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) { + case 0: + sdhc_clk = 0; + break; + case 1: + sdhc_clk = csb_clk; + break; + case 2: + sdhc_clk = csb_clk / 2; + break; + case 3: + sdhc_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_SDHCCM value */ + return -8; + } #endif -#if !defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) + i2c1_clk = tsec2_clk; +#elif defined(CONFIG_MPC8360) i2c1_clk = csb_clk; +#elif defined(CONFIG_MPC832X) + i2c1_clk = enc_clk; +#elif defined(CONFIG_MPC831X) + i2c1_clk = enc_clk; +#elif defined(CONFIG_MPC837X) + i2c1_clk = sdhc_clk; #endif #if !defined(CONFIG_MPC832X) - i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ + i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ #endif - switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { +#if defined(CONFIG_MPC837X) + switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) { case 0: - enc_clk = 0; + pciexp1_clk = 0; break; case 1: - enc_clk = csb_clk; + pciexp1_clk = csb_clk; break; case 2: - enc_clk = csb_clk / 2; + pciexp1_clk = csb_clk / 2; break; case 3: - enc_clk = csb_clk / 3; + pciexp1_clk = csb_clk / 3; break; default: - /* unkown SCCR_ENCCM value */ - return -6; + /* unkown SCCR_PCIEXP1CM value */ + return -9; } + switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) { + case 0: + pciexp2_clk = 0; + break; + case 1: + pciexp2_clk = csb_clk; + break; + case 2: + pciexp2_clk = csb_clk / 2; + break; + case 3: + pciexp2_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_PCIEXP2CM value */ + return -10; + } +#endif + +#if defined(CONFIG_MPC837X) + switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) { + case 0: + sata_clk = 0; + break; + case 1: + sata_clk = csb_clk; + break; + case 2: + sata_clk = csb_clk / 2; + break; + case 3: + sata_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_SATA1CM value */ + return -11; + } +#endif + lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; @@ -280,7 +373,7 @@ int get_clocks(void) break; default: /* unknown lcrr */ - return -10; + return -12; } ddr_clk = csb_clk * @@ -316,7 +409,7 @@ int get_clocks(void) break; default: /* unkown core to csb ratio */ - return -12; + return -13; } #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) @@ -327,7 +420,7 @@ int get_clocks(void) #endif gd->csb_clk = csb_clk; -#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; gd->usbdr_clk = usbdr_clk; @@ -335,6 +428,9 @@ int get_clocks(void) #if defined(CONFIG_MPC834X) gd->usbmph_clk = usbmph_clk; #endif +#if defined(CONFIG_MPC837X) + gd->sdhc_clk = sdhc_clk; +#endif gd->core_clk = core_clk; gd->i2c1_clk = i2c1_clk; #if !defined(CONFIG_MPC832X) @@ -351,6 +447,11 @@ int get_clocks(void) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif +#if defined(CONFIG_MPC837X) + gd->pciexp1_clk = pciexp1_clk; + gd->pciexp2_clk = pciexp2_clk; + gd->sata_clk = sata_clk; +#endif gd->pci_clk = pci_sync_in; gd->cpu_clk = gd->core_clk; gd->bus_clk = gd->csb_clk; @@ -387,7 +488,10 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if !defined(CONFIG_MPC832X) printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); #endif -#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC837X) + printf(" SDHC: %4d MHz\n", gd->sdhc_clk / 1000000); +#endif +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000); @@ -395,6 +499,11 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_MPC834X) printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); #endif +#if defined(CONFIG_MPC837X) + printf(" PCIEXP1: %4d MHz\n", gd->pciexp1_clk / 1000000); + printf(" PCIEXP2: %4d MHz\n", gd->pciexp2_clk / 1000000); + printf(" SATA: %4d MHz\n", gd->sata_clk / 1000000); +#endif return 0; } diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 4676e2c..fab1117 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -55,7 +55,7 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; @@ -63,6 +63,9 @@ typedef struct global_data { #if defined (CONFIG_MPC834X) u32 usbmph_clk; #endif /* CONFIG_MPC834X */ +#if defined(CONFIG_MPC837X) + u32 sdhc_clk; +#endif u32 core_clk; u32 i2c1_clk; u32 i2c2_clk; @@ -71,6 +74,11 @@ typedef struct global_data { u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_MPC837X) + u32 pciexp1_clk; + u32 pciexp2_clk; + u32 sata_clk; +#endif #if defined(CONFIG_MPC8360) u32 ddr_sec_clk; #endif /* CONFIG_MPC8360 */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 0de9338..7517111 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. * * MPC83xx Internal Memory Map * @@ -63,7 +63,8 @@ typedef struct sysconf83xx { u8 res6[0x0C]; u32 ddrcdr; /* DDR Control Driver Register */ u32 ddrdsr; /* DDR Debug Status Register */ - u8 res7[0xD0]; + u32 obir; /* Output Buffer Impedance Register */ + u8 res7[0xCC]; } sysconf83xx_t; /* @@ -553,6 +554,41 @@ typedef struct security83xx { u8 fixme[0x10000]; } security83xx_t; +/* + * PCI Express + */ +typedef struct pex83xx { + u8 fixme[0x1000]; +} pex83xx_t; + +/* + * SATA + */ +typedef struct sata83xx { + u8 fixme[0x1000]; +} sata83xx_t; + +/* + * eSDHC + */ +typedef struct sdhc83xx { + u8 fixme[0x1000]; +} sdhc83xx_t; + +/* + * SerDes + */ +typedef struct serdes83xx { + u8 fixme[0x100]; +} serdes83xx_t; + +/* + * On Chip ROM + */ +typedef struct rom83xx { + u8 mem[0x10000]; +} rom83xx_t; + #if defined(CONFIG_MPC834X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ @@ -625,6 +661,50 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; +#elif defined(CONFIG_MPC837X) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[2]; /* General purpose I/O module */ + u8 res0[0x1200]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0xa00]; + pex83xx_t pciexp[2]; /* PCI Express Controller */ + u8 res6[0xd000]; + sata83xx_t sata[4]; /* SATA Controller */ + u8 res7[0x7000]; + usb83xx_t usb[1]; /* USB DR Controller */ + tsec83xx_t tsec[2]; + u8 res8[0x8000]; + sdhc83xx_t sdhc; /* SDHC Controller */ + u8 res9[0x1000]; + security83xx_t security; + u8 res10[0xA3000]; + serdes83xx_t serdes[2]; /* SerDes Registers */ + u8 res11[0xCE00]; + rom83xx_t rom; /* On Chip ROM */ +} immap_t; + #elif defined(CONFIG_MPC8360) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4d32c6a..4c23094 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -98,10 +98,17 @@ #define SPR_8321E_REV11 0x80660011 #define SPR_8321_REV11 0x80670011 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8313_REV10 0x80B10010 #define SPR_8313E_REV10 0x80B00010 +#define SPR_8313_REV10 0x80B10010 +#define SPR_8311E_REV10 0x80B20010 +#define SPR_8311_REV10 0x80B30010 + +#define SPR_8379E_REV10 0x80C20010 +#define SPR_8379_REV10 0x80C30010 +#define SPR_8378E_REV10 0x80C40010 +#define SPR_8378_REV10 0x80C50010 +#define SPR_8377E_REV10 0x80C60010 +#define SPR_8377_REV10 0x80C70010 /* SPCR - System Priority Configuration Register */ @@ -130,8 +137,8 @@ #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) -#elif defined(CONFIG_MPC831X) -/* SPCR bits - MPC831x specific */ +#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) +/* SPCR bits - MPC831x and MPC837x specific */ #define SPCR_TSECDP 0x00003000 /* TSEC data priority */ #define SPCR_TSECDP_SHIFT (31-19) #define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */ @@ -242,6 +249,55 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 +#elif defined(CONFIG_MPC837X) +/* SICRL bits - MPC837x specific */ +#define SICRL_USB_A 0xC0000000 +#define SICRL_USB_B 0x30000000 +#define SICRL_UART 0x0C000000 +#define SICRL_GPIO_A 0x02000000 +#define SICRL_GPIO_B 0x01000000 +#define SICRL_GPIO_C 0x00800000 +#define SICRL_GPIO_D 0x00400000 +#define SICRL_GPIO_E 0x00200000 +#define SICRL_GPIO_F 0x00180000 +#define SICRL_GPIO_G 0x00040000 +#define SICRL_GPIO_H 0x00020000 +#define SICRL_GPIO_I 0x00010000 +#define SICRL_GPIO_J 0x00008000 +#define SICRL_GPIO_K 0x00004000 +#define SICRL_GPIO_L 0x00003000 +#define SICRL_DMA_A 0x00000800 +#define SICRL_DMA_B 0x00000400 +#define SICRL_DMA_C 0x00000200 +#define SICRL_DMA_D 0x00000100 +#define SICRL_DMA_E 0x00000080 +#define SICRL_DMA_F 0x00000040 +#define SICRL_DMA_G 0x00000020 +#define SICRL_DMA_H 0x00000010 +#define SICRL_DMA_I 0x00000008 +#define SICRL_DMA_J 0x00000004 +#define SICRL_LDP_A 0x00000002 +#define SICRL_LDP_B 0x00000001 + +/* SICRH bits - MPC837x specific */ +#define SICRH_DDR 0x80000000 +#define SICRH_TSEC1_A 0x10000000 +#define SICRH_TSEC1_B 0x08000000 +#define SICRH_TSEC2_A 0x00400000 +#define SICRH_TSEC2_B 0x00200000 +#define SICRH_TSEC2_C 0x00100000 +#define SICRH_TSEC2_D 0x00080000 +#define SICRH_TSEC2_E 0x00040000 +#define SICRH_TMR 0x00010000 +#define SICRH_GPIO2_A 0x00008000 +#define SICRH_GPIO2_B 0x00004000 +#define SICRH_GPIO2_C 0x00002000 +#define SICRH_GPIO2_D 0x00001000 +#define SICRH_GPIO2_E 0x00000C00 +#define SICRH_GPIO2_F 0x00000300 +#define SICRH_GPIO2_G 0x000000C0 +#define SICRH_GPIO2_H 0x00000030 +#define SICRH_SPI 0x00000003 #endif /* SWCRR - System Watchdog Control Register @@ -390,6 +446,14 @@ #define HRCWL_CE_TO_PLL_1X29 0x0000001D #define HRCWL_CE_TO_PLL_1X30 0x0000001E #define HRCWL_CE_TO_PLL_1X31 0x0000001F + +#elif defined(CONFIG_MPC837X) +#define HRCWL_SVCOD 0x30000000 +#define HRCWL_SVCOD_SHIFT 28 +#define HRCWL_SVCOD_DIV_4 0x00000000 +#define HRCWL_SVCOD_DIV_8 0x10000000 +#define HRCWL_SVCOD_DIV_2 0x20000000 +#define HRCWL_SVCOD_DIV_1 0x30000000 #endif /* HRCWH - Hardware Reset Configuration Word High @@ -436,11 +500,14 @@ #if defined(CONFIG_MPC834X) #define HRCWH_ROM_LOC_PCI2 0x00200000 #endif +#if defined(CONIFG_MPC837X) +#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000 +#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 -#if defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) #define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 #define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 #define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 @@ -489,8 +556,13 @@ /* RSR - Reset Status Register */ +#if defined(CONFIG_MPC837X) +#define RSR_RSTSRC 0xF0000000 /* Reset source */ +#define RSR_RSTSRC_SHIFT 28 +#else #define RSR_RSTSRC 0xE0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 29 +#endif #define RSR_BSF 0x00010000 /* Boot seq. fail */ #define RSR_BSF_SHIFT 16 #define RSR_SWSR 0x00002000 /* software soft reset */ @@ -577,8 +649,8 @@ #define SCCR_PCICM 0x00010000 #define SCCR_PCICM_SHIFT 16 -/* SCCR bits - MPC8349 specific */ -#ifdef CONFIG_MPC834X +#if defined(CONFIG_MPC834X) +/* SCCR bits - MPC834x specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -593,6 +665,18 @@ #define SCCR_TSEC2CM_2 0x20000000 #define SCCR_TSEC2CM_3 0x30000000 +/* The MPH must have the same clock ratio as DR, unless its clock disabled */ +#define SCCR_USBMPHCM 0x00c00000 +#define SCCR_USBMPHCM_SHIFT 22 +#define SCCR_USBDRCM 0x00300000 +#define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBCM 0x00f00000 +#define SCCR_USBCM_SHIFT 20 +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + #elif defined(CONFIG_MPC831X) /* TSEC1 bits are for TSEC2 as well */ #define SCCR_TSEC1CM 0xc0000000 @@ -606,17 +690,67 @@ #define SCCR_TSEC2ON 0x10000000 #define SCCR_TSEC2ON_SHIFT 28 -#endif - -#define SCCR_USBMPHCM 0x00c00000 -#define SCCR_USBMPHCM_SHIFT 22 #define SCCR_USBDRCM 0x00300000 #define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00100000 +#define SCCR_USBDRCM_2 0x00200000 +#define SCCR_USBDRCM_3 0x00300000 -#define SCCR_USBCM_0 0x00000000 -#define SCCR_USBCM_1 0x00500000 -#define SCCR_USBCM_2 0x00A00000 -#define SCCR_USBCM_3 0x00F00000 +#elif defined(CONFIG_MPC837X) +/* SCCR bits - MPC837x specific */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC2CM 0x30000000 +#define SCCR_TSEC2CM_SHIFT 28 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 + +#define SCCR_SDHCCM 0x0c000000 +#define SCCR_SDHCCM_SHIFT 26 +#define SCCR_SDHCCM_0 0x00000000 +#define SCCR_SDHCCM_1 0x04000000 +#define SCCR_SDHCCM_2 0x08000000 +#define SCCR_SDHCCM_3 0x0c000000 + +#define SCCR_USBDRCM 0x00c00000 +#define SCCR_USBDRCM_SHIFT 22 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00400000 +#define SCCR_USBDRCM_2 0x00800000 +#define SCCR_USBDRCM_3 0x00c00000 + +#define SCCR_PCIEXP1CM 0x00300000 +#define SCCR_PCIEXP1CM_SHIFT 20 +#define SCCR_PCIEXP1CM_0 0x00000000 +#define SCCR_PCIEXP1CM_1 0x00100000 +#define SCCR_PCIEXP1CM_2 0x00200000 +#define SCCR_PCIEXP1CM_3 0x00300000 + +#define SCCR_PCIEXP2CM 0x000c0000 +#define SCCR_PCIEXP2CM_SHIFT 18 +#define SCCR_PCIEXP2CM_0 0x00000000 +#define SCCR_PCIEXP2CM_1 0x00040000 +#define SCCR_PCIEXP2CM_2 0x00080000 +#define SCCR_PCIEXP2CM_3 0x000c0000 + +/* All of the four SATA controllers must have the same clock ratio */ +#define SCCR_SATA1CM 0x000000c0 +#define SCCR_SATA1CM_SHIFT 6 +#define SCCR_SATACM 0x000000ff +#define SCCR_SATACM_SHIFT 0 +#define SCCR_SATACM_0 0x00000000 +#define SCCR_SATACM_1 0x00000055 +#define SCCR_SATACM_2 0x000000aa +#define SCCR_SATACM_3 0x000000ff +#endif /* CSn_BDNS - Chip Select memory Bounds Register */ @@ -860,7 +994,7 @@ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) +#if !defined(CONFIG_MPC834X) #define BR_ATOM 0x0000000C #define BR_ATOM_SHIFT 2 #endif @@ -869,7 +1003,7 @@ #if defined(CONFIG_MPC834X) #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) -#elif defined(CONFIG_MPC8360) +#else #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) #endif @@ -1255,7 +1389,7 @@ #define LTESR_CS 0x00080000 #define LTESR_CC 0x00000001 -/* DDR Control Driver Register +/* DDRCDR - DDR Control Driver Register */ #define DDRCDR_EN 0x40000000 #define DDRCDR_PZ 0x3C000000 -- 1.5.1

1 0

[U-Boot-Users] Reset issue on mpc85xx
by urwithsughosh＠gmail.com 18 Sep '07

18 Sep '07

Hello, I am working on a custom board having mpc8560 and mpc8540. On porting the v1.3.0-rc1 u-boot, i get a peculiar issue. The board does not reset on giving the 'reset' command. This is observed only on the release candidate version of u-boot. I've also ported the 1.2.0 release and there it works fine. I tried debugging the issue by putting some debug statements, in the board.c file after the init_sequence, and what i observe is that the msr register is getting cleared. But the 1.2.0 version shows the correct value, i.e 0x1200 which is programmed in the start.S. After setting the MSR[DE] bit in the do_reset function along with the DBCR0 register settings, the board resets correctly. Am i missing something. Please throw some light on it. -- sughosh

1 1

[U-Boot-Users] question for u-boot 1.1.4
by 井逍遥 17 Sep '07

17 Sep '07

Hi: We use uboot-1.1.4 on embeded linux 2.6. But we found it not support nand flash with 16bit ,2048 bytes/page(we use sansung k9f1g16u0m). The system cannot boot.If there are some parameters needed to modify,pleaese tell us.Thank you. _________________________________________________________________ Windows Live Spaces 中最年轻的成员！ http://miaomiaogarden2007.spaces.live.com/

2 1

[U-Boot-Users] TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
by Wolfgang Denk 17 Sep '07

17 Sep '07

Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- include/configs/FPS850L.h | 60 +++++++++++++++++++++++++++++++------------- include/configs/FPS860L.h | 46 +++++++++++++++++++++++++++------- include/configs/TQM823L.h | 5 ++- include/configs/TQM823M.h | 5 ++- include/configs/TQM850L.h | 5 ++- include/configs/TQM850M.h | 5 ++- include/configs/TQM855L.h | 5 ++- include/configs/TQM855M.h | 5 ++- include/configs/TQM860L.h | 5 ++- include/configs/TQM860M.h | 5 ++- include/configs/TQM862L.h | 5 ++- include/configs/TQM862M.h | 5 ++- include/configs/TQM866M.h | 5 ++- 13 files changed, 111 insertions(+), 50 deletions(-) diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 322158c..3b0ddb4 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -39,28 +39,44 @@ #undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 19200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40020000" /* autoboot command */ +#define CONFIG_BAUDRATE 115200 -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * BOOTP options */ @@ -80,24 +96,32 @@ #define CONFIG_BOOTP_NTPSERVER #define CONFIG_BOOTP_TIMEOFFSET +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ /* * Command line configuration. */ #include <config_cmd_default.h> -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_CACHE +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index f8698b5..6fec075 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -40,18 +40,37 @@ #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 115200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else + +#define CONFIG_BOOTCOUNT_LIMIT + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ @@ -79,11 +98,11 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ #include <config_cmd_default.h> + #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -95,7 +114,14 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 2bdcf2c..384789b 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 58bc5d3..47f416b 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 74b16c7..e4b0bd2 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -66,8 +66,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index e3936c3..f26c46e 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -64,8 +64,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index ae22b77..330c931 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 5d54f87..77c2f11 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 40c0940..a903c2b 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 481e3d0..b905a0a 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index bb3b1cc..d8ddf37 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index d687d08..50607f0 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index ff00c13..ea310c4 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -81,8 +81,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -- 1.5.2.4

2 2