August 2007 - U-Boot

[U-Boot-Users] ColdFire: MCF52x2 update VII
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part VII. Regards, TsiChung

1 0

[U-Boot-Users] ColdFire: MCF52x2 update Part VI - resend
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part VI. Regards, TsiChung

1 0

[U-Boot-Users] ColdFire: MCF52x2 update part IV - b - resend
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part IV - b. Regards, TsiChung

1 0

[U-Boot-Users] Using 'ver' env var
by Zach Sadecki 14 Aug '07

14 Aug '07

I would like to be able to identify the u-boot version from linux. At first this seemed straight-forward, simply enable CONFIG_VERSION_VARIABLE and use fw_printenv in linux. This, of course, doesn't work, as 'ver' is not saveenv'ed and fw_printenv just pulls the info from flash (or whereever). Writing a routine in the board init file (last_stage_init) doesn't help, as 'ver' is set after that is run and therefore the stored version string is the old one (if an update occurs). So this is a 2 part question... What good is the 'ver' env var? It's apparently only useful in u-boot itself and u-boot already has a 'version' command that gives you the same info. And second, I'm sure I'm not the first person to want to see u-boot version in linux, so how have other accomplished this? Thanks, Zach

4 18

[U-Boot-Users] [ARM] TI DaVinci fix (stupid me...)
by ksi＠koi8.net 14 Aug '07

14 Aug '07

Please apply this until it's not too late... Stupid me, put %hhx format specifier in sprintfs and it sure doesn't work in U-Boot... Everything else is OK so far. BTW, I do hope that attached, not inline, patch should work. This is against the current GIT tree. Signed-off-by: Sergey Kubushyn <ksi(a)koi8.net> --- ****************************************************************** * KSI@home KOI8 Net < > The impossible we do immediately. * * Las Vegas NV, USA < > Miracles require 24-hour notice. * ******************************************************************

2 2

[U-Boot-Users] ColdFire: MCF52x2 update part V
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part V. Regards, TsiChung

1 0

[U-Boot-Users] ColdFire: MCF52x2 update Part III - resend
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part III. Regards, TsiChung

1 0

[U-Boot-Users] ColdFire: MCF52x2 update Part II b
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part II b. I manually split the file into two portions. Regards, TsiChung

1 0

[U-Boot-Users] ColdFire: MCF52x2 update Part II a
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Update for MCF52x2 part II a. I manually split the file into two portions. Regards, TsiChung

1 0

[U-Boot-Users] Update for 5329
by Liew Tsi Chung-r5aahp 14 Aug '07

14 Aug '07

Stefan, Here is the updates: 1. Update-CONFIG_MCFUART.patch 2. Added-common-define-CONFIG_CF_MII-for-do_mii.patch 3. Moved-sync-from-m5329evb.c-to-include-asm-m68k-io.patch 4. Added-uart_gpio_conf-for-port-configuration.patch 5. Update-timer.patch 6. Added-fsl_i2c-header-file.patch 7. Added-NAND-Flash-support-and-I2C-support.patch 8. Added-GPIO-enabled-for-I2C-signals.patch Note: NAND support still partially incomplete, unable to read/write. Erase, bad, markbad, lock, unlock and info seems working. Thanks, Regards, TsiChung

3 11