August 2007 - U-Boot

[U-Boot-Users] (no subject)
by Blanch L. Rosario 18 Aug '07

18 Aug '07

1 0

[U-Boot-Users] RAMDisk on MPC5200
by Jon Smirl 18 Aug '07

18 Aug '07

I have a new Phytec MPC5200 board and I'm trying to figure out how to get Linux booting on it. I have the kernel all built and I want to use a NFS root file system. When I use u-boot to tftp load the kernel, it errors out loading the RAMDisk. Who is requesting the RAMDisk be loaded, is this coming from the kernel or u-boot? Since I am booting from a NFS root I don't need a RAMdisk so I want to turn this off. I'm using OSELAS MPC5200-tiny-5 to build but I'll switch to another environment if needed to work around this. uboot> run bcmd_net Using FEC ETHERNET device TFTP from server 192.168.1.4; our IP address is 192.168.1.11 Filename 'uImage-pcm030'. Load address: 0x500000 Loading: ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 1215282 (128b32 hex) Using FEC ETHERNET device TFTP from server 192.168.1.4; our IP address is 192.168.1.11 Filename 'oftree-pcm030.dtb'. Load address: 0x400000 Loading: # done Bytes transferred = 5091 (13e3 hex) ## Booting image at 00500000 ... Image Name: Linux-2.6.20-rt3-pcm030-4 Created: 2007-08-17 21:31:00 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1215218 Bytes = 1.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00000000 ... Bad Magic Number -- Jon Smirl jonsmirl(a)gmail.com

2 6

[U-Boot-Users] You've received a greeting from a family member!
by egreetings.com 17 Aug '07

17 Aug '07

1 0

[U-Boot-Users] [PATCH] mpc83xx: fix typo in DDR2 programming
by Kim Phillips 17 Aug '07

17 Aug '07

introduced in the implement board_add_ram_info patch as I was cleaning out the magic numbers. sorry. Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- cpu/mpc83xx/spd_sdram.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 040836c..ee2d038 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -744,7 +744,7 @@ long int spd_sdram() if (spd.mem_type == SPD_MEMTYPE_DDR) sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2; sdram_cfg = (0 | SDRAM_CFG_MEM_EN /* DDR enable */ -- 1.5.0.3

1 0

[U-Boot-Users] Hi, I am new to U-Boot, how do I get started?
by Arun Bothe 17 Aug '07

17 Aug '07

Hi, I am new to U-Boot. Currently I am working for adm5120 board. I read "readme" file, and "DULG.pdf", & U-Boot mailing archive also. ADM5120 / ADM5120P Specs: * 175MHz/227MIPS 4Kc CPU with an embedded cache, 8K-byte I-cache and 8K D-cache MIPS32 * 5 IEEE 802.e Fast Ethernet PHY interfaces and 1 GMII/MII interface * Two SDRAM banks (each bank 1M-32 up to 32Mx32Bit)(support upto 2Mx32Bytes) * Two Flash banks up to 4MB(NOR Flash and Nand Flash), and many more. I have few questions regarding this, are My "config.mk" file contains #ROM version TEXT_BASE = 0x80100000 PRE_TEXT_BASE = 0xBFC00000 Q1: TEXT_BASE is the location of U-Boot in RAM, means TEXT_BASE points to SDRAM perticular location? or tell more about TEXT_BASE. Q2: In my board setting CFG_MONITOR_BASE=TEXT_BASE, means my boot monitor code reading from EEPROM? ***************************** For my board setting #define CFG_SDRAM_BASE 0x80000000 and #define CFG_MEMTEST_START 0x80100000 #define CFG_MEMTEST_END 0x81000000 Q3: CFG_MEMTEST_START, and CFG_MEMTEST_END are simple memory test area, but I don't understand purpose of this test or which test and purpose? ***************************** In my board setting /* addresses for switch descriptors and buffers * reason for those fixed address is that the adm5120 switch * engine can only deploy descriptors and packet buffers * @ address < 16MB. * 0x80000000 ~ 0x80100000 is now reserved, so it SHOULD be safe * to put the addresses within this area */ #define CFG_PKTBUF_ADDR 0x800C0000 #define CFG_ARPBUF_ADDR 0x800D0000 #define CFG_DESC_ADDR 0x800F0000 Q4: means? Q5: Which are the other important configuration macro's I've to study? or I've to pay more attention? Q6: Where I get more help of U-Boot for ADM5120, excepts the above mentioned files?

1 0

[U-Boot-Users] greeting ecard
by jprice＠abahe.co.uk 17 Aug '07

17 Aug '07

1 0

Re: [U-Boot-Users] Oh-oh out of disk space on the server
by Wolfgang Denk 17 Aug '07

17 Aug '07

In message <46C4FADF.2020901(a)cideas.com> you wrote: > > I applied Kim's patch of Aug 10 and tried to push it but received a "no > space left on device" error. Help! Should be fixed. There are some stupid idiots active at the moment trying to hack our twiki, placing links to hundrets of porn sites to random pages. This caused some work to us, but it also greated a 40+ GB apache error log file. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Where people stand is not as important as which way they face. - Terry Pratchett & Stephen Briggs, _The Discworld Companion_

1 0

[U-Boot-Users] [PATCH 3/3] mpc83xx: move freescale boards to boards/freescale
by Kim Phillips 17 Aug '07

17 Aug '07

includes build fixes. Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- looks like git didn't quite detect all the renames here (thus the copies and deletes). Anyway, this should be it for mpc83xx for this window. Makefile | 10 ++-- board/{ => freescale}/mpc8313erdb/Makefile | 0 board/{ => freescale}/mpc8313erdb/config.mk | 0 board/{ => freescale}/mpc8313erdb/mpc8313erdb.c | 0 board/{ => freescale}/mpc8313erdb/sdram.c | 0 .../mpc832xemds}/Makefile | 2 +- board/{ => freescale}/mpc832xemds/config.mk | 0 board/{ => freescale}/mpc832xemds/mpc832xemds.c | 2 +- board/{ => freescale}/mpc832xemds/pci.c | 0 board/{ => freescale}/mpc8349emds/Makefile | 0 board/{ => freescale}/mpc8349emds/config.mk | 0 board/{ => freescale}/mpc8349emds/mpc8349emds.c | 0 board/{ => freescale}/mpc8349emds/pci.c | 0 board/{ => freescale}/mpc8349itx/Makefile | 0 board/{ => freescale}/mpc8349itx/config.mk | 0 board/{ => freescale}/mpc8349itx/mpc8349itx.c | 0 board/{ => freescale}/mpc8349itx/pci.c | 0 .../mpc8360emds}/Makefile | 2 +- board/{ => freescale}/mpc8360emds/config.mk | 0 board/{ => freescale}/mpc8360emds/mpc8360emds.c | 2 +- board/{ => freescale}/mpc8360emds/pci.c | 0 board/mpc832xemds/Makefile | 50 -------------------- board/mpc8360emds/Makefile | 50 -------------------- 23 files changed, 9 insertions(+), 109 deletions(-) rename board/{ => freescale}/mpc8313erdb/Makefile (100%) rename board/{ => freescale}/mpc8313erdb/config.mk (100%) rename board/{ => freescale}/mpc8313erdb/mpc8313erdb.c (100%) rename board/{ => freescale}/mpc8313erdb/sdram.c (100%) copy board/{mpc8349emds => freescale/mpc832xemds}/Makefile (97%) rename board/{ => freescale}/mpc832xemds/config.mk (100%) rename board/{ => freescale}/mpc832xemds/mpc832xemds.c (99%) rename board/{ => freescale}/mpc832xemds/pci.c (100%) copy board/{ => freescale}/mpc8349emds/Makefile (100%) rename board/{ => freescale}/mpc8349emds/config.mk (100%) rename board/{ => freescale}/mpc8349emds/mpc8349emds.c (100%) rename board/{ => freescale}/mpc8349emds/pci.c (100%) rename board/{ => freescale}/mpc8349itx/Makefile (100%) rename board/{ => freescale}/mpc8349itx/config.mk (100%) rename board/{ => freescale}/mpc8349itx/mpc8349itx.c (100%) rename board/{ => freescale}/mpc8349itx/pci.c (100%) rename board/{mpc8349emds => freescale/mpc8360emds}/Makefile (97%) rename board/{ => freescale}/mpc8360emds/config.mk (100%) rename board/{ => freescale}/mpc8360emds/mpc8360emds.c (99%) rename board/{ => freescale}/mpc8360emds/pci.c (100%) delete mode 100644 board/mpc832xemds/Makefile delete mode 100644 board/mpc8360emds/Makefile diff --git a/Makefile b/Makefile index 65efd3f..62531a5 100644 --- a/Makefile +++ b/Makefile @@ -1688,7 +1688,7 @@ MPC8313ERDB_66_config: unconfig echo -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale @@ -1716,10 +1716,10 @@ MPC832XEMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds + @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ @@ -1733,7 +1733,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx + @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ @@ -1758,7 +1758,7 @@ MPC8360EMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds + @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile similarity index 100% rename from board/mpc8313erdb/Makefile rename to board/freescale/mpc8313erdb/Makefile diff --git a/board/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk similarity index 100% rename from board/mpc8313erdb/config.mk rename to board/freescale/mpc8313erdb/config.mk diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c similarity index 100% rename from board/mpc8313erdb/mpc8313erdb.c rename to board/freescale/mpc8313erdb/mpc8313erdb.c diff --git a/board/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c similarity index 100% rename from board/mpc8313erdb/sdram.c rename to board/freescale/mpc8313erdb/sdram.c diff --git a/board/mpc8349emds/Makefile b/board/freescale/mpc832xemds/Makefile similarity index 97% copy from board/mpc8349emds/Makefile copy to board/freescale/mpc832xemds/Makefile index 5ec7a87..ea52484 100644 --- a/board/mpc8349emds/Makefile +++ b/board/freescale/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk similarity index 100% rename from board/mpc832xemds/config.mk rename to board/freescale/mpc832xemds/config.mk diff --git a/board/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c similarity index 99% rename from board/mpc832xemds/mpc832xemds.c rename to board/freescale/mpc832xemds/mpc832xemds.c index 7a45ded..6ba25d4 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -33,7 +33,7 @@ #include <libfdt.h> #endif #if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" +#include "../common/pq-mds-pib.h" #endif const qe_iop_conf_t qe_iop_conf_tab[] = { diff --git a/board/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c similarity index 100% rename from board/mpc832xemds/pci.c rename to board/freescale/mpc832xemds/pci.c diff --git a/board/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile similarity index 100% copy from board/mpc8349emds/Makefile copy to board/freescale/mpc8349emds/Makefile diff --git a/board/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk similarity index 100% rename from board/mpc8349emds/config.mk rename to board/freescale/mpc8349emds/config.mk diff --git a/board/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c similarity index 100% rename from board/mpc8349emds/mpc8349emds.c rename to board/freescale/mpc8349emds/mpc8349emds.c diff --git a/board/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c similarity index 100% rename from board/mpc8349emds/pci.c rename to board/freescale/mpc8349emds/pci.c diff --git a/board/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile similarity index 100% rename from board/mpc8349itx/Makefile rename to board/freescale/mpc8349itx/Makefile diff --git a/board/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk similarity index 100% rename from board/mpc8349itx/config.mk rename to board/freescale/mpc8349itx/config.mk diff --git a/board/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c similarity index 100% rename from board/mpc8349itx/mpc8349itx.c rename to board/freescale/mpc8349itx/mpc8349itx.c diff --git a/board/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c similarity index 100% rename from board/mpc8349itx/pci.c rename to board/freescale/mpc8349itx/pci.c diff --git a/board/mpc8349emds/Makefile b/board/freescale/mpc8360emds/Makefile similarity index 97% rename from board/mpc8349emds/Makefile rename to board/freescale/mpc8360emds/Makefile index 5ec7a87..ea52484 100644 --- a/board/mpc8349emds/Makefile +++ b/board/freescale/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk similarity index 100% rename from board/mpc8360emds/config.mk rename to board/freescale/mpc8360emds/config.mk diff --git a/board/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c similarity index 99% rename from board/mpc8360emds/mpc8360emds.c rename to board/freescale/mpc8360emds/mpc8360emds.c index 0751c6f..e050cd4 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -31,7 +31,7 @@ #include <libfdt.h> #endif #if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" +#include "../common/pq-mds-pib.h" #endif const qe_iop_conf_t qe_iop_conf_tab[] = { diff --git a/board/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c similarity index 100% rename from board/mpc8360emds/pci.c rename to board/freescale/mpc8360emds/pci.c diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile deleted file mode 100644 index 4da74b8..0000000 --- a/board/mpc832xemds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile deleted file mode 100644 index 4da74b8..0000000 --- a/board/mpc8360emds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### -- 1.5.2.2

1 0

[U-Boot-Users] [PATCH 2/3] mpc83xx: suppress unused variable 'val8' warning
by Kim Phillips 17 Aug '07

17 Aug '07

Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- board/freescale/common/pq-mds-pib.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index 9799117..8c013c7 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -22,9 +22,10 @@ int pib_init(void) /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); i2c_set_bus_num(1); + + val8 = 0; #if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) /* Assign PIB PMC slot to desired PCI bus */ - val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); i2c_write(0x23, 0x7, 1, &val8, 1); val8 = 0xff; -- 1.5.2.2

1 0

[U-Boot-Users] [PATCH 1/3] mpc83xx: implement board_add_ram_info
by Kim Phillips 17 Aug '07

17 Aug '07

add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- board/freescale/mpc8323erdb/mpc8323erdb.c | 2 - board/mpc8313erdb/sdram.c | 3 -- board/mpc832xemds/mpc832xemds.c | 2 - board/mpc8349emds/mpc8349emds.c | 8 +---- board/mpc8349itx/mpc8349itx.c | 3 +- board/mpc8360emds/mpc8360emds.c | 5 +-- board/sbc8349/sbc8349.c | 5 +-- board/tqm834x/tqm834x.c | 4 +- cpu/mpc83xx/spd_sdram.c | 54 +++++++++++++++++++++-------- include/configs/MPC8313ERDB.h | 4 +- include/mpc83xx.h | 5 ++- 11 files changed, 50 insertions(+), 45 deletions(-) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 850d1c3..e738613 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -91,8 +91,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c index 4b67788..e6e8410 100644 --- a/board/mpc8313erdb/sdram.c +++ b/board/mpc8313erdb/sdram.c @@ -112,8 +112,6 @@ long int initdram(int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ msize = fixed_sdram(); @@ -127,7 +125,6 @@ long int initdram(int board_type) resume_from_sleep(); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return msize; } diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index f70783e..d0a7cc8 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -103,8 +103,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 2ad25ec..39c0916 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -70,8 +70,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -90,7 +88,7 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -191,9 +189,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -255,7 +250,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts(" SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 125e6c0..c82f784 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -76,7 +76,7 @@ int fixed_sdram(void) im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); im->ddr.sdram_interval = @@ -162,7 +162,6 @@ long int initdram(int board_type) ddr_enable_ecc(msize * 1048576); #endif - puts(" DDR RAM: "); /* return total bus RAM size(bytes) */ return msize * 1024 * 1024; } diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 3861733..1101f66 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -138,7 +138,7 @@ long int initdram(int board_type) * Initialize SDRAM if it is on local bus. */ sdram_init(); - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -223,8 +223,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc = &immap->lbus; uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -280,7 +278,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts("SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 4cd447e..86166ea 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -64,8 +64,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -84,7 +82,6 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -130,7 +127,7 @@ int fixed_sdram(void) #if defined(CONFIG_DDR_2T_TIMING) | SDRAM_CFG_2T_EN #endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; + | SDRAM_CFG_SDRAM_TYPE_DDR1; #if defined (CONFIG_DDR_32BIT) /* for 32-bit mode burst length is 8 */ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index 9c35e22..7d0b055 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -114,7 +114,7 @@ long int initdram (int board_type) /* enable DDR controller */ im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR); + SDRAM_CFG_SDRAM_TYPE_DDR1); SYNC; /* size detection */ @@ -388,7 +388,7 @@ static void set_ddr_config(void) { /* don't enable DDR controller yet */ im->ddr.sdram_cfg = SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR; + SDRAM_CFG_SDRAM_TYPE_DDR1; SYNC; /* Set SDRAM mode */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 54f0c83..040836c 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,6 +34,30 @@ #include <asm/mmu.h> #include <spd_sdram.h> +void board_add_ram_info(int use_default) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) + >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); + + if (ddr->sdram_cfg & SDRAM_CFG_32_BE) + puts(", 32-bit"); + else + puts(", 64-bit"); + + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + puts(", ECC on)"); + else + puts(", ECC off)"); + +#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) + puts("\nSDRAM: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); +#endif +} + #ifdef CONFIG_SPD_EEPROM DECLARE_GLOBAL_DATA_PTR; @@ -109,7 +133,7 @@ long int spd_sdram() unsigned int n_ranks; unsigned int odt_rd_cfg, odt_wr_cfg; unsigned char twr_clk, twtr_clk; - unsigned char sdram_type; + unsigned int sdram_type; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -137,7 +161,7 @@ long int spd_sdram() #endif /* Check the memory type */ if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) { - printf("DDR: Module mem type is %02X\n", spd.mem_type); + debug("DDR: Module mem type is %02X\n", spd.mem_type); return 0; } @@ -578,17 +602,17 @@ long int spd_sdram() burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ else burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 32 bit"); + debug("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 64 bit"); + debug("\n DDR DIMM: data bus width is 64 bit"); } /* Is this an ECC DDR chip? */ if (spd.config == 0x02) - printf(" with ECC\n"); + debug(" with ECC\n"); else - printf(" without ECC\n"); + debug(" without ECC\n"); /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential @@ -718,26 +742,26 @@ long int spd_sdram() * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) */ if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_type = 2; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = 3; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; sdram_cfg = (0 - | (1 << 31) /* DDR enable */ - | (1 << 30) /* Self refresh */ - | (sdram_type << 24) /* SDRAM type */ + | SDRAM_CFG_MEM_EN /* DDR enable */ + | SDRAM_CFG_SREN /* Self refresh */ + | sdram_type /* SDRAM type */ ); /* sdram_cfg[3] = RD_EN - registered DIMM enable */ if (spd.mod_attr & 0x02) - sdram_cfg |= 0x10000000; + sdram_cfg |= SDRAM_CFG_RD_EN; /* The DIMM is 32bit width */ if (spd.dataw_lsb == 0x20) { if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_cfg |= 0x000C0000; + sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE; if (spd.mem_type == SPD_MEMTYPE_DDR2) - sdram_cfg |= 0x00080000; + sdram_cfg |= SDRAM_CFG_32_BE; } ddrc_ecc_enable = 0; @@ -758,7 +782,7 @@ long int spd_sdram() debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif - printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); + debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index e51ab99..96a4cd4 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -113,12 +113,12 @@ /* 0x03200064 */ #if defined(CONFIG_DDR_2T_TIMING) #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_2T_EN \ | SDRAM_CFG_DBW_32 ) #else #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_32_BE ) /* 0x43080000 */ #endif diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 829dbf9..4d32c6a 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -705,8 +705,9 @@ #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 -#define SDRAM_CFG_SDRAM_TYPE 0x03000000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 -- 1.5.2.2

1 0

[U-Boot-Users] [PATCH] mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
by Tony Li 17 Aug '07

17 Aug '07

The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by Tony Li <tony.li(a)freescale.com> --- board/freescale/common/pq-mds-pib.c | 101 +++++++++++++++++++++++++++++++++++ board/freescale/common/pq-mds-pib.h | 9 +++ board/mpc832xemds/Makefile | 2 +- board/mpc832xemds/mpc832xemds.c | 11 ++++ board/mpc832xemds/pci.c | 40 -------------- board/mpc8360emds/Makefile | 2 +- board/mpc8360emds/mpc8360emds.c | 11 ++++ board/mpc8360emds/pci.c | 40 -------------- include/configs/MPC832XEMDS.h | 3 + include/configs/MPC8360EMDS.h | 7 ++- 10 files changed, 142 insertions(+), 84 deletions(-) create mode 100644 board/freescale/common/pq-mds-pib.c create mode 100644 board/freescale/common/pq-mds-pib.h diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 0000000..9799117 --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li <tony.li(a)freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 0000000..67066fd --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc832xemds/Makefile +++ b/board/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index 772da67..a049a14 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -30,6 +30,9 @@ #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* ETH3 */ @@ -86,6 +89,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + int fixed_sdram(void); long int initdram(int board_type) diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c index d0a407a..dd92682 100644 --- a/board/mpc832xemds/pci.c +++ b/board/mpc832xemds/pci.c @@ -129,7 +129,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -198,43 +197,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -290,8 +252,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc8360emds/Makefile +++ b/board/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 3fa093d..210d62d 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -31,6 +31,9 @@ #include <libfdt.h> #include <libfdt_env.h> #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -107,6 +110,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 8f90471..83f6b2c 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -132,7 +132,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -201,43 +200,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -293,8 +255,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f62ca2c..96a302c 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,8 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +89,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 4b32a14..094b66e 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,8 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +90,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +312,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* -- 1.5.1

1 0

[U-Boot-Users] [PATCH] mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
by Tony Li 17 Aug '07

17 Aug '07

The patch splits the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by: Tony Li <tony.li(a)freescale.com> ---From cb531f3c9b98a08c15544d957bfcc2731710c979 Mon Sep 17 00:00:00 2001 From: lil <tony.li(a)freescale.com> Date: Thu, 16 Aug 2007 11:29:31 +0800 Subject: [PATCH] Splite PIB init code from pci.c And add support QOC3 ATM card. --- board/freescale/common/pq-mds-pib.c | 101 +++++++++++++++++++++++++++++++++++ board/freescale/common/pq-mds-pib.h | 9 +++ board/mpc832xemds/Makefile | 2 +- board/mpc832xemds/mpc832xemds.c | 11 ++++ board/mpc832xemds/pci.c | 40 -------------- board/mpc8360emds/Makefile | 2 +- board/mpc8360emds/mpc8360emds.c | 11 ++++ board/mpc8360emds/pci.c | 40 -------------- include/configs/MPC832XEMDS.h | 4 ++ include/configs/MPC8360EMDS.h | 8 ++- 10 files changed, 144 insertions(+), 84 deletions(-) create mode 100644 board/freescale/common/pq-mds-pib.c create mode 100644 board/freescale/common/pq-mds-pib.h diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 0000000..9799117 --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li <tony.li(a)freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 0000000..67066fd --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc832xemds/Makefile +++ b/board/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index 772da67..a049a14 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -30,6 +30,9 @@ #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* ETH3 */ @@ -86,6 +89,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + int fixed_sdram(void); long int initdram(int board_type) diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c index d0a407a..dd92682 100644 --- a/board/mpc832xemds/pci.c +++ b/board/mpc832xemds/pci.c @@ -129,7 +129,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -198,43 +197,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -290,8 +252,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc8360emds/Makefile +++ b/board/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 3fa093d..210d62d 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -31,6 +31,9 @@ #include <libfdt.h> #include <libfdt_env.h> #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -107,6 +110,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 8f90471..83f6b2c 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -132,7 +132,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -201,43 +200,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -293,8 +255,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f62ca2c..055b2e2 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,9 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ + +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +90,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 4b32a14..f6cde03 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,9 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ + +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +91,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +313,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* -- 1.5.1

3 2

[U-Boot-Users] Oh-oh out of disk space on the server
by Jerry Van Baren 17 Aug '07

17 Aug '07

Hi Wolfgang, I applied Kim's patch of Aug 10 and tried to push it but received a "no space left on device" error. Help! Thanks, gvb $ git push git+ssh://gu-fdt@www.denx.de/u-boot-fdt fdt updating 'refs/heads/fdt' from 308e2b3a6c3fd84fceada79b3d4a559280d326a6 to 8f8aa4d0e7d37eb2cfef054d0bc5736d20b99657 Generating pack... Done counting 49 objects. Result has 25 objects. Deltifying 25 objects. 100% (25/25) done Writing 25 objects. 100% (25/25) done Total 25, written 25 (delta 24), reused 0 (delta 0) Unpacking 25 objects error: file write error (No space left on device) fatal: unable to write sha1 file unpack unpacker exited with error code ng refs/heads/fdt n/a (unpacker error)

1 0

[U-Boot-Users] funny ecard
by hanan.elbahie＠dhimortgage.com 17 Aug '07

17 Aug '07

1 0

[U-Boot-Users] [PATCH] Update MPC8544 DS PCI memory map
by Kumar Gala 17 Aug '07

17 Aug '07

The PCIe bus that the ULI M1575 is connected to has no possible way of needing more than the fixed amount of IO & Memory space needed by the ULI. So make it use far less IO & memory space and have it use the shared LAW. This free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed by each bus. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- board/freescale/mpc8544ds/init.S | 13 ++++++------- include/configs/MPC8544DS.h | 21 +++++++++------------ 2 files changed, 15 insertions(+), 19 deletions(-) diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index ea7d54d..900c368 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -218,7 +218,7 @@ law_entry: .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) @@ -226,18 +226,17 @@ law_entry: .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M) - /* To keep to 10 LAWs, PCIE1_IO_PHYS must use top of mem region */ + .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K) + /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE3_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_2M) 4: entry_end diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index fcb92fa..746f360 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -282,7 +282,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe1000000 -#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -294,26 +294,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCIE2_IO_BASE 0x00000000 -#define CFG_PCIE2_IO_PHYS 0xe2000000 -#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE2_IO_PHYS 0xe1010000 +#define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2,tgtid 2, Base address a000 */ #define CFG_PCIE1_MEM_BASE 0xa0000000 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE -#define CFG_PCIE1_MEM_SIZE 0x08000000 /* 128M */ -#define CFG_PCIE1_MEM_BASE2 0xa8000000 -#define CFG_PCIE1_MEM_PHYS2 CFG_PCIE1_MEM_BASE2 -#define CFG_PCIE1_MEM_SIZE2 0x04000000 /* 64M */ -#define CFG_PCIE1_IO_BASE 0x00000000 /* reuse mem LAW */ -#define CFG_PCIE1_IO_PHYS 0xaf000000 -#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe1020000 +#define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address b000 */ #define CFG_PCIE3_MEM_BASE 0xb0000000 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE -#define CFG_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ #define CFG_PCIE3_IO_BASE 0x00000000 -#define CFG_PCIE3_IO_PHYS 0xe3000000 +#define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) -- 1.5.2.2

2 1

[U-Boot-Users] [PATCH] Fix up some fdt issues on 8544DS
by Kumar Gala 16 Aug '07

16 Aug '07

It looks like we had a merge issue that duplicated a bit of code in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get the MAC address properly set in the device tree on boot for TSEC1 Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- board/freescale/mpc8544ds/mpc8544ds.c | 7 ------- include/configs/MPC8544DS.h | 1 + 2 files changed, 1 insertions(+), 7 deletions(-) diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 8ddbb01..80822be 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -540,12 +540,5 @@ ft_board_setup(void *blob, bd_t *bd) debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]); } #endif - ft_cpu_setup(blob, bd); - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } } #endif diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 7863447..fcb92fa 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -472,6 +472,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD -- 1.5.2.2

2 1

[U-Boot-Users] [PATCH 1/6] mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
by Kim Phillips 16 Aug '07

16 Aug '07

and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- MAINTAINERS | 30 +++++++++++++++++------------- MAKEALL | 1 + 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f812431..3371e0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -42,6 +42,10 @@ Yuli Barcohen <yuli(a)arabellasw.com> Rattler MPC8248 ZPC1900 MPC8265 +Michael Barkowski <michael.barkowski(a)freescale.com> + + MPC8323ERDB MPC8323 + Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> sacsng MPC8260 @@ -217,6 +221,10 @@ The LEOX team <team(a)leox.org> ELPT860 MPC860T +Dave Liu <daveliu(a)freescale.com> + + MPC8360EMDS MPC8360 + Nye Liu <nyet(a)zumanetworks.com> ZUMA MPC7xx_74xx @@ -273,6 +281,10 @@ Denis Peter <d.peter(a)mpl.ch> MIP405 PPC4xx PIP405 PPC4xx +Kim Phillips <kim.phillips(a)freescale.com> + + MPC8349EMDS MPC8349 + Daniel Poirot <dan.poirot(a)windriver.com> sbc8240 MPC8240 @@ -320,6 +332,11 @@ Peter De Schrijver <p2(a)mind.be> ML2 PPC4xx +Timur Tabi <timur(a)freescale.com> + + MPC8349E-mITX MPC8349 + MPC8349E-mITX-GP MPC8349 + Erik Theisen <etheisen(a)mindspring.com> W7OLMC PPC4xx @@ -352,19 +369,6 @@ John Zhan <zhanz(a)sinovee.com> svm_sc8xx MPC8xx -Timur Tabi <timur(a)freescale.com> - - MPC8349E-mITX MPC8349 - MPC8349E-mITX-GP MPC8349 - -Kim Phillips <kim.phillips(a)freescale.com> - - MPC8349EMDS MPC8349 - -Dave Liu <daveliu(a)freescale.com> - - MPC8360EMDS MPC8360 - ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 1219fb3..d50ff8b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -298,6 +298,7 @@ LIST_8260=" \ LIST_83xx=" \ MPC8313ERDB_33 \ MPC8313ERDB_66 \ + MPC8323ERDB \ MPC832XEMDS \ MPC8349EMDS \ MPC8349ITX \ -- 1.5.2.2

2 2

Re: [U-Boot-Users] Lite5200 + TFTP problem
by Sri nava kala devi Valteti, TLS-Chennai 16 Aug '07

16 Aug '07

Hi, TFTP server is running and checked TFTP connection from another machine. It works. Firewall is disabled, no firewall issue. With u-boot 1.1.6 -- Timeout error occurs. With u-boot 1.2 -- File not found error occurs. Please, help me. Thanks, Kala. -----Original Message----- From: wd(a)denx.de [mailto:wd@denx.de] Sent: Tuesday, August 14, 2007 7:07 PM To: Sri nava kala devi Valteti, TLS-Chennai Cc: u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] Lite5200 + TFTP problem In message <66E8AEE9980BB44CA5FCAD39EBA56AC6021181C0(a)CHN-HCLT-EVS02.HCLT.CORP.HCL.IN> you wrote: > > I am using Lite5200 board with u-Boot-1.2.0. TRy using a more current version (from the git repository). > While downloading the kernel image (2.6.16) through TFTP, I am getting > timeout error. > > What can be the problem? Please help me. Maybe your TFTP server is not replying (did you test that tftpd is running?) or doesn't even see the request because of some firewall rules? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Was heißt Windows auf Indianisch? - "Weißer Mann, der auf Sanduhr wartet!" DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------

3 2

[U-Boot-Users] [PATCH] fdt: suppress unused variable 'bd' warning
by Kim Phillips 16 Aug '07

16 Aug '07

Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- gvb, please apply, in addition to: "fdt: remove unused OF_FLAT_TREE_MAX_SIZE references" sent Fri, 10 Aug 2007 14:34:14 -0500 Thanks, Kim. common/fdt_support.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/common/fdt_support.c b/common/fdt_support.c index caaa682..175d59e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -46,7 +46,6 @@ struct fdt_header *fdt; int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force) { - bd_t *bd = gd->bd; int nodeoffset; int err; u32 tmp; /* used to set 32 bit integer properties */ -- 1.5.2.2

3 2

[U-Boot-Users] CFG_MONITOR_BASE < CFG_FLASH_BASE
by Timur Tabi 16 Aug '07

16 Aug '07

In several board config files (namely 8xxx boards), I see code that looks like this: #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else #undef CFG_RAMBOOT #endif ... #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) #define CFG_ENV_SIZE 0x2000 #endif So CFG_RAMBOOT is defined if U-Boot is located in RAM instead of in Flash. On a system that has flash, why would we ever support this configuration? It doesn't even make any sense, because a whole bunch of DDR and LAWBAR setup needs to happen before RAM can even be accessed, so you can't copy u-boot to RAM and reset the system. -- Timur Tabi Linux Kernel Developer @ Freescale

6 16

[U-Boot-Users] Musical card
by gmpboy＠paloma.com 16 Aug '07

16 Aug '07

1 0

[U-Boot-Users] [PATCH] Fix warnings from of_data copy fix
by Andy Fleming 16 Aug '07

16 Aug '07

Forgot to cast of_flat_tree to ulong. Signed-off-by: Andy Fleming <afleming(a)freescale.com> --- common/cmd_bootm.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 90e3f8b..bcb927f 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -932,7 +932,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * so we flag it to be copied if it is not. */ if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) - of_data = of_flat_tree; + of_data = (ulong)of_flat_tree; #endif /* move of_flat_tree if needed */ @@ -993,7 +993,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * so we flag it to be copied if it is not. */ if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) - of_data = of_flat_tree; + of_data = (ulong)of_flat_tree; #endif /* move of_flat_tree if needed */ -- 1.5.0.2.230.gfbe3d-dirty

2 1

[U-Boot-Users] [PATCH] Fix numerous bugs in the 8568 UEC support
by Andy Fleming 16 Aug '07

16 Aug '07

Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming <afleming(a)freescale.com> --- drivers/qe/uec.c | 6 +++--- include/asm-ppc/immap_85xx.h | 2 +- include/configs/MPC8568MDS.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 89a7279..dc2765b 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1110,7 +1110,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd) if (dev->enetaddr[0] & 0x01) { printf("%s: MacAddress is multcast address\n", __FUNCTION__); - return -EINVAL; + return 0; } uec_set_mac_address(uec, dev->enetaddr); uec->the_first_run = 1; @@ -1119,10 +1119,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd) err = uec_open(uec, COMM_DIR_RX_AND_TX); if (err) { printf("%s: cannot enable UEC device\n", dev->name); - return err; + return 0; } - return 0; + return uec->mii_info->link; } static void uec_halt(struct eth_device* dev) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 3d4816f..496fc72 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1596,7 +1596,7 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ -#ifdef MPC8568 +#ifdef CONFIG_MPC8568 char res10b[76]; par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ char res10c[3136]; diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6b824ed..80ccda5 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -35,7 +35,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_QE /* Enable QE */ +#define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -348,7 +348,7 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_UEC_ETH #ifndef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_ETHPRIME "FSL UEC0" #endif #define CONFIG_PHY_MODE_NEED_CHANGE #define CONFIG_eTSEC_MDIO_BUS @@ -409,7 +409,7 @@ extern unsigned long get_clock_freq(void); #define TSEC1_FLAGS TSEC_GIGABIT #define TSEC2_FLAGS TSEC_GIGABIT -/* Options are: eTSEC[0-3] */ +/* Options are: eTSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ -- 1.5.0.2.230.gfbe3d-dirty

2 1

[U-Boot-Users] [PATCH] Define tsec flag values in config files
by Andy Fleming 16 Aug '07

16 Aug '07

The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming <afleming(a)freescale.com> --- drivers/tsec.c | 30 +++++++++++------------------- include/configs/MPC8313ERDB.h | 2 ++ include/configs/MPC8349EMDS.h | 2 ++ include/configs/MPC8349ITX.h | 2 ++ include/configs/MPC8540ADS.h | 3 +++ include/configs/MPC8540EVAL.h | 4 ++++ include/configs/MPC8541CDS.h | 5 ++--- include/configs/MPC8544DS.h | 8 +++----- include/configs/MPC8548CDS.h | 4 ++++ include/configs/MPC8555CDS.h | 5 ++--- include/configs/MPC8560ADS.h | 3 ++- include/configs/MPC8568MDS.h | 6 +++--- include/configs/MPC8641HPCN.h | 4 ++++ include/configs/PM854.h | 3 +++ include/configs/PM856.h | 3 ++- include/configs/TQM834x.h | 2 ++ include/configs/TQM85xx.h | 3 +++ include/configs/sbc8349.h | 2 ++ include/configs/sbc8641d.h | 4 ++++ include/configs/stxgp3.h | 3 ++- include/configs/stxssa.h | 3 ++- 21 files changed, 64 insertions(+), 37 deletions(-) diff --git a/drivers/tsec.c b/drivers/tsec.c index c011123..b65e2db 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -65,38 +65,30 @@ struct tsec_info_struct { * FEC_PHYIDX */ static struct tsec_info_struct tsec_info[] = { -#if defined(CONFIG_TSEC1) -#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN) - {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, -#else - {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, -#endif +#ifdef CONFIG_TSEC1 + {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC2) -#if defined(CONFIG_MPC8641HPCN) - {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, -#else - {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, -#endif +#ifdef CONFIG_TSEC2 + {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, #else {0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, 0, FEC_PHYIDX}, + {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, #else -#if defined(CONFIG_TSEC3) - {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, +#ifdef CONFIG_TSEC3 + {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC4) - {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, +#ifdef CONFIG_TSEC4 + {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, #else {0, 0, 0}, -#endif -#endif +#endif /* CONFIG_TSEC4 */ +#endif /* CONFIG_MPC85XX_FEC */ }; #define MAXCONTROLLERS (4) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 81db96f..f92dce5 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -310,6 +310,8 @@ #define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 1567fcf..10af5f0 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -440,6 +440,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 44649d0..58ee13d 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -382,6 +382,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT #endif #ifdef CONFIG_TSEC2 @@ -391,6 +392,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS TSEC_GIGABIT #endif #define CONFIG_ETHPRIME "Freescale TSEC" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5a7c879..b774992 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -374,6 +374,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #if CONFIG_HAS_FEC @@ -381,6 +383,7 @@ #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #endif /* Options are: TSEC[0-1], FEC */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 0ce25cf..5c03ac8 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -224,6 +224,10 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define FEC_FLAGS 0 + /* Options are: TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 232f171..33a153e 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 32934e1..7863447 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -364,15 +364,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC1_NAME "eTSEC1" #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */ -#define CONFIG_SGMII_RISER -#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */ #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + #define TSEC1_PHYIDX 0 #define TSEC3_PHYIDX 0 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index cda9fd5..7345a3e 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -447,6 +447,10 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index e8fe99a..48a2663 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index c10e551..da41dad 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -360,11 +360,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index dc9cb1f..6b824ed 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -399,9 +399,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "eTSEC1" -#undef CONFIG_TSEC3 -#undef CONFIG_TSEC4 -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 3 @@ -409,6 +406,9 @@ extern unsigned long get_clock_freq(void); #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 64dcbd0..e912331 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -417,6 +417,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define CONFIG_ETHPRIME "eTSEC1" diff --git a/include/configs/PM854.h b/include/configs/PM854.h index dbf9422..93090b9 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -270,11 +270,14 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6bdfa5d..6105747 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -262,11 +262,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #endif /* CONFIG_TSEC_ENET */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 661712b..91c1694 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -253,6 +253,8 @@ extern int tqm834x_num_flash_banks; #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d5ce3ba..cb9bf54 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -266,8 +266,11 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 1831bef..aa515ea 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -410,6 +410,8 @@ #define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 68d31ca..848535b 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -380,6 +380,10 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC4_FLAGS TSEC_GIGABIT #define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 1f41cf7..43b185b 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -234,12 +234,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 55e2c8d..3dae27a 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -260,12 +260,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -- 1.5.0.2.230.gfbe3d-dirty

2 1

[U-Boot-Users] [PATCH] Don't wait for disconnected TSECs
by Andy Fleming 16 Aug '07

16 Aug '07

The TSEC driver's PHY code waits a long time for autonegotiation to complete, even if the link is down. The PHY knows the link is down or up before autonegotiation completes, so we can short-circuit the process if the link is down. Signed-off-by: Andy Fleming <afleming(a)freescale.com> --- drivers/tsec.c | 30 +++++++++++++++++------------- 1 files changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/tsec.c b/drivers/tsec.c index 1df8f7d..6bca4dc 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -347,17 +347,16 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv) uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) { /* - * Wait if PHY is capable of autonegotiation and autonegotiation - * is not complete. + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) */ mii_reg = read_phy_reg(priv, MIIM_STATUS); - if ((mii_reg & PHY_BMSR_AUTN_ABLE) + if ((mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) { int i = 0; puts("Waiting for PHY auto negotiation to complete"); - while (!((mii_reg & PHY_BMSR_AUTN_COMP) - && (mii_reg & MIIM_STATUS_LINK))) { + while (!(mii_reg & PHY_BMSR_AUTN_COMP)) { /* * Timeout reached ? */ @@ -377,7 +376,10 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) priv->link = 1; udelay(500000); /* another 500 ms (results in faster booting) */ } else { - priv->link = 1; + if (mii_reg & MIIM_STATUS_LINK) + priv->link = 1; + else + priv->link = 0; } return 0; @@ -517,16 +519,13 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS); - if (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { + if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && + !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { int i = 0; puts("Waiting for PHY realtime link"); - while (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { - /* - * Timeout reached ? - */ + while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts(" TIMEOUT !\n"); priv->link = 0; @@ -541,6 +540,11 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) } puts(" done\n"); udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) + priv->link = 1; + else + priv->link = 0; } if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) -- 1.5.0.2.230.gfbe3d-dirty

2 1