July 2007 - U-Boot

[U-Boot-Users] [PATCH 2/5] Minor improvements to drivers/pci_auto.c
by Jon Loeliger 11 Jul '07

11 Jul '07

From: Ed Swarthout <Ed.Swarthout(a)freescale.com> - Make pciauto_{pre,post}scan_setup_bridge non-static - Added physical address display in debug messages. Signed-off-by: Ed Swarthout <Ed.Swarthout(a)freescale.com> --- drivers/pci_auto.c | 29 ++++++++++++++++++++--------- 1 files changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index f170c2d..9fa18e5 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -65,7 +65,7 @@ int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned res->bus_lower = addr + size; - DEBUGF("address=0x%lx", addr); + DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower); *bar = addr; return 0; @@ -154,7 +154,7 @@ void pciauto_setup_device(struct pci_controller *hose, pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); } -static void pciauto_prescan_setup_bridge(struct pci_controller *hose, +void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { struct pci_region *pci_mem = hose->pci_mem; @@ -211,7 +211,7 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); } -static void pciauto_postscan_setup_bridge(struct pci_controller *hose, +void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { struct pci_region *pci_mem = hose->pci_mem; @@ -282,25 +282,36 @@ void pciauto_config_init(struct pci_controller *hose) if (hose->pci_mem) { pciauto_region_init(hose->pci_mem); - DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n", + DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n" + "\t\tPhysical Memory [%x-%x]\n", hose->pci_mem->bus_start, - hose->pci_mem->bus_start + hose->pci_mem->size - 1); + hose->pci_mem->bus_start + hose->pci_mem->size - 1, + hose->pci_mem->phys_start, + hose->pci_mem->phys_start + hose->pci_mem->size - 1); } if (hose->pci_prefetch) { pciauto_region_init(hose->pci_prefetch); - DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n", + DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n" + "\t\tPhysical Memory [%x-%x]\n", hose->pci_prefetch->bus_start, - hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1); + hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1, + hose->pci_prefetch->phys_start, + hose->pci_prefetch->phys_start + + hose->pci_prefetch->size - 1); } if (hose->pci_io) { pciauto_region_init(hose->pci_io); - DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n", + DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n" + "\t\tPhysical Memory: [%x-%x]\n", hose->pci_io->bus_start, - hose->pci_io->bus_start + hose->pci_io->size - 1); + hose->pci_io->bus_start + hose->pci_io->size - 1, + hose->pci_io->phys_start, + hose->pci_io->phys_start + hose->pci_io->size - 1); + } } -- 1.5.2.1.126.g6abd0

1 0

[U-Boot-Users] [PATCH 1/5] Start pci hose scan from hose->current_busno.
by Jon Loeliger 11 Jul '07

11 Jul '07

From: Ed Swarthout <Ed.Swarthout(a)freescale.com> Ensure hose->current_busno is not less than first_busno. This fixes broken board code which leaves current_busno=0 when first_busno is greater than 0 for the cases with multiple controllers. Signed-off-by: Ed Swarthout <Ed.Swarthout(a)freescale.com> --- drivers/pci.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-) diff --git a/drivers/pci.c b/drivers/pci.c index 050582f..4158919 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -490,10 +490,16 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) int pci_hose_scan(struct pci_controller *hose) { + /* Start scan at current_busno. + * PCIe will start scan at first_busno+1. + */ + /* For legacy support, ensure current>=first */ + if (hose->first_busno > hose->current_busno) + hose->current_busno = hose->first_busno; #ifdef CONFIG_PCI_PNP pciauto_config_init(hose); #endif - return pci_hose_scan_bus(hose, hose->first_busno); + return pci_hose_scan_bus(hose, hose->current_busno); } void pci_init(void) -- 1.5.2.1.126.g6abd0

1 0

[U-Boot-Users] Fix problem with get/setdcr commands introduced by cfg patches
by Stefan Roese 11 Jul '07

11 Jul '07

Signed-off-by: Stefan Roese <sr(a)denx.de> --- commit 981ee564aeea50072d23045b88918df73bb8dc37 tree 3a2d693997fad34fd049a56518dbb44195342392 parent e4dbe1b215f5c6c462e76909d240bd96472b84de author Stefan Roese <sr(a)denx.de> Fri, 06 Jul 2007 09:43:55 +0200 committer Stefan Roese <sr(a)denx.de> Fri, 06 Jul 2007 09:43:55 +0200 cpu/ppc4xx/dcr.S | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S index 7102364..554db1b 100644 --- a/cpu/ppc4xx/dcr.S +++ b/cpu/ppc4xx/dcr.S @@ -22,7 +22,7 @@ */ #include <config.h> -#if defined(CONFIG_4xx) && defined(CFG_CMD_SETGETDCR) +#if defined(CONFIG_4xx) && ((CONFIG_COMMANDS & CFG_CMD_SETGETDCR) || defined(CONFIG_CMD_SETGETDCR)) #include <ppc4xx.h>

4 6

[U-Boot-Users] (no subject)
by hi5 Support 11 Jul '07

11 Jul '07

Hi, Thanks for writing to hi5 Support! We apologize for the uncomfortable situation you've experienced on hi5 and thank you for reporting this to us. It is very important to us to provide our members a safe and friendly community. At hi5 we do not associate ourselves with any sort of spam. We would like to assure you that the member you reported no longer exists with us. We hope you recognize our commitment to maintain a high level of quality. Sincerely, Steven - hi5 Support

1 0

[U-Boot-Users] ez-x5 board patch file
by Mi-hyun.Yoo 11 Jul '07

11 Jul '07

i need that file

1 0

[U-Boot-Users] [PATCH] Call ft_board_setup() from the bootm command.
by Jerry Van Baren 11 Jul '07

11 Jul '07

In the patch titled "Create new fdt boardsetup command..." I removed the call to ft_board_setup() from the routine fdt_chosen(), but I forgot to add a direct call back into cmd_bootm.c This fixes the oversight by adding the direct call to the bootm command. Signed-off-by: Gerald Van Baren <vanbaren(a)cideas.com> --- Thanks, Timur, for finding the screwup. gvb common/cmd_bootm.c | 4 ++++ common/cmd_fdt.c | 7 ------- include/fdt_support.h | 6 ++++++ 3 files changed, 10 insertions(+), 7 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index cf5dafd..c8825b6 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -980,6 +980,10 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, do_reset (cmdtp, flag, argc, argv); } #endif +#ifdef CONFIG_OF_BOARD_SETUP + /* Call the board-specific fixup routine */ + ft_board_setup(fdt, gd->bd); +#endif #endif /* CONFIG_OF_LIBFDT */ #if defined(CONFIG_OF_FLAT_TREE) /* move of_flat_tree if needed */ diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 824088c..9ddec47 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -44,13 +44,6 @@ */ DECLARE_GLOBAL_DATA_PTR; -/* - * Function prototypes/declarations. - */ -#ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd); -#endif - static int fdt_valid(void); static int fdt_parse_prop(char *pathp, char *prop, char *newval, char *data, int *len); diff --git a/include/fdt_support.h b/include/fdt_support.h index a276834..60fa423 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -38,5 +38,11 @@ int fdt_env(void *fdt); int fdt_bd_t(void *fdt); #endif +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd); +void ft_cpu_setup(void *blob, bd_t *bd); +void ft_pci_setup(void *blob, bd_t *bd); +#endif + #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ -- 1.4.4.4

1 0

[U-Boot-Users] [patch] document CFG_VIDEO_LOGO_MAX_SIZE in README
by Andrew Dyer 11 Jul '07

11 Jul '07

If CONFIG_VIDEO_BMP_GZIP is defined, then CFG_VIDEO_LOGO_MAX_SIZE also needs to be defined. Patch below adds a note about this to the README. Signed-off-by: Andrew Dyer <amdyer(a)gmail.com> -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] Fix malloc problem introduced with the relocation fixup for the PPC platform
by Stefan Roese 11 Jul '07

11 Jul '07

The relocation fixup didn't handle the malloc pointer initialization correctly. This patch fixes this problem. Tested successfully on 4xx. The relocation fixup patches for 4xx will follow soon. Signed-off-by: Stefan Roese <sr(a)denx.de> --- commit 3a1e66ba75172959973377d6069f1d12e1a4ecb3 tree 6fdde574dd5328b805e0e438ebb32cc7e7de8f4d parent dcc0264878406d52b879d2e5a63d3d793371434e author Stefan Roese <sr(a)denx.de> Sun, 08 Jul 2007 13:42:52 +0200 committer Stefan Roese <sr(a)denx.de> Sun, 08 Jul 2007 13:42:52 +0200 lib_ppc/board.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 8bb885d..5e156ab 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -139,10 +139,10 @@ static ulong mem_malloc_brk = 0; */ static void mem_malloc_init (void) { - ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off; - - mem_malloc_end = dest_addr; - mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN; +#if !defined(CONFIG_RELOC_FIXUP_WORKS) + mem_malloc_end = CFG_MONITOR_BASE + gd->reloc_off; +#endif + mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN; mem_malloc_brk = mem_malloc_start; memset ((void *) mem_malloc_start, @@ -623,6 +623,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #if defined(CONFIG_RELOC_FIXUP_WORKS) gd->reloc_off = 0; + mem_malloc_end = dest_addr; #else gd->reloc_off = dest_addr - CFG_MONITOR_BASE; #endif

4 6

[U-Boot-Users] [PATCH 00/30] Finally kill off CONFIG_COMMANDS and CONFIG_BOOTP_MASK
by Jon Loeliger 11 Jul '07

11 Jul '07

5 6

[U-Boot-Users] [PATCH 14/14] disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
by Jon Loeliger 10 Jul '07

10 Jul '07

Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl(a)freescale.com> --- disk/part.c | 2 +- doc/README.JFFS2 | 2 +- doc/README.PIP405 | 14 ++++++-------- doc/README.usb | 6 +++--- lib_arm/board.c | 2 +- lib_generic/crc32.c | 4 ++-- lib_i386/board.c | 4 ++-- lib_m68k/board.c | 2 +- lib_mips/board.c | 2 +- lib_ppc/board.c | 4 ++-- lib_ppc/kgdb.c | 2 +- tools/updater/cmd_flash.c | 2 +- 12 files changed, 22 insertions(+), 24 deletions(-) diff --git a/disk/part.c b/disk/part.c index b0c909c..0e772ee 100644 --- a/disk/part.c +++ b/disk/part.c @@ -174,7 +174,7 @@ void dev_print (block_dev_desc_t *dev_desc) puts (" Capacity: not available\n"); } } -#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */ +#endif #if (defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SCSI) || \ diff --git a/doc/README.JFFS2 b/doc/README.JFFS2 index 270da90..c5d67fd 100644 --- a/doc/README.JFFS2 +++ b/doc/README.JFFS2 @@ -2,7 +2,7 @@ JFFS2 options and usage. ----------------------- JFFS2 in U-Boot is a read only implementation of the file system in -Linux with the same name. To use JFFS2 define CFG_CMD_JFFS2. +Linux with the same name. To use JFFS2 define CONFIG_CMD_JFFS2. The module adds three new commands. fsload - load binary file from a file system image diff --git a/doc/README.PIP405 b/doc/README.PIP405 index c5ccf18..610ff21 100644 --- a/doc/README.PIP405 +++ b/doc/README.PIP405 @@ -32,10 +32,8 @@ Changed files: - include/cmd_bsp.h added PIP405 commands definitions - include/cmd_condefs.h added Floppy and SCSI support - include/cmd_disk.h changed to work with block device description -- include/config_LANTEC.h excluded CFG_CMD_FDC and CFG_CMD_SCSI from - CONFIG_CMD_FULL -- include/config_hymod.h excluded CFG_CMD_FDC and CFG_CMD_SCSI from - CONFIG_CMD_FULL +- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI +- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI - include/flash.h added INTEL_ID_28F320C3T 0x88C488C4 - include/i2c.h added "defined(CONFIG_PIP405)" - include/image.h added IH_OS_U_BOOT, IH_TYPE_FIRMWARE @@ -88,8 +86,8 @@ section "Changes". New Commands: ------------- -CFG_CMD_SCSI SCSI Support -CFG_CMF_FDC Floppy disk support +CONFIG_CMD_SCSI SCSI Support +CONFIG_CMF_FDC Floppy disk support IDE additions: -------------- @@ -172,8 +170,8 @@ Added Devices: Floppy support: --------------- Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS -+ 0x3F0. Enabled with define CFG_CMD_FDC. Reads a unformated floppy disk with a -image header (see: mkimage). No interrupts and no DMA are used for this. ++ 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk +with a image header (see: mkimage). No interrupts and no DMA are used for this. Added files: - common/cmd_fdc.c - include/cmd_fdc.h diff --git a/doc/README.usb b/doc/README.usb index 41f76f4..b3bcb91 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -73,8 +73,8 @@ Storage USB Commands: Config Switches: ---------------- -CFG_CMD_USB enables basic USB support and the usb command -CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if - using CFG_CMD_USB +CONFIG_CMD_USB enables basic USB support and the usb command +CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined + if using CONFIG_CMD_USB CONFIG_USB_KEYBOARD enables the USB Keyboard CONFIG_USB_STORAGE enables the USB storage devices diff --git a/lib_arm/board.c b/lib_arm/board.c index e175607..8f4e19b 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -382,7 +382,7 @@ void start_armboot (void) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif #ifdef BOARD_LATE_INIT board_late_init (); diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c index da23336..df0dbca 100644 --- a/lib_generic/crc32.c +++ b/lib_generic/crc32.c @@ -9,7 +9,7 @@ */ #ifndef USE_HOSTCC /* Shut down "ANSI does not permit..." warnings */ -#include <common.h> /* to get command definitions like CFG_CMD_JFFS2 */ +#include <common.h> #endif #include "zlib.h" @@ -196,4 +196,4 @@ uLong ZEXPORT crc32_no_comp(uLong crc, const Bytef *buf, uInt len) return crc; } -#endif /* CFG_CMD_JFFS2 */ +#endif diff --git a/lib_i386/board.c b/lib_i386/board.c index 667d2da..47fbab4 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -352,7 +352,7 @@ void start_i386boot (void) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif WATCHDOG_RESET(); @@ -360,7 +360,7 @@ void start_i386boot (void) WATCHDOG_RESET(); puts("IDE: "); ide_init(); -#endif /* CFG_CMD_IDE */ +#endif #if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET(); diff --git a/lib_m68k/board.c b/lib_m68k/board.c index b7e76b8..293fd04 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -624,7 +624,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif WATCHDOG_RESET (); diff --git a/lib_mips/board.c b/lib_mips/board.c index dd3d167..91ccec0 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -403,7 +403,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 12ea473..8651cb3 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -982,7 +982,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif WATCHDOG_RESET (); @@ -1051,7 +1051,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #else ide_init (); #endif -#endif /* CFG_CMD_IDE */ +#endif #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); diff --git a/lib_ppc/kgdb.c b/lib_ppc/kgdb.c index d272d3a..78c2f0c 100644 --- a/lib_ppc/kgdb.c +++ b/lib_ppc/kgdb.c @@ -323,4 +323,4 @@ kgdb_breakpoint(int argc, char *argv[]) "); } -#endif /* CFG_CMD_KGDB */ +#endif diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index 746bcbb..a976e0d 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -427,4 +427,4 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) return rcode; } -#endif /* CFG_CMD_FLASH */ +#endif -- 1.5.2.2.249.g45fd

1 0