April 2007 - U-Boot

[U-Boot-Users] UBoot's terminal server
by vvj 24 Apr '07

24 Apr '07

>From UBoot manual: "...There are several ways to access the serial console port on your target system, such as using a terminal server, but the most common way is to attach it to a serial port on your host. Additionally, you will need a terminal emulation program on your host system, such as cu or kermit. .." My question is: How can I use Uboot shell wo RS232 COMport connection - are there ways to get rsh (telnet or whatever) server working on UBoot? Yes, I'm using RS232 currently, but what if I want to use UBoot shell through ethernet, how could I configure UBoot to make it setup "terminal server"? -- View this message in context: http://www.nabble.com/UBoot%27s-terminal-server-tf3632025.html#a10141414 Sent from the Uboot - Users mailing list archive at Nabble.com.

3 6

[U-Boot-Users] [PATCH] Fix U-Boot base address depending on CONFIG_SKIP_LOWLEVEL_INIT
by Ladislav Michl 24 Apr '07

24 Apr '07

Hi, this patch was posted to patch tracking system and silently ignored... later on it was posted to ARM maintainer with the very same result... Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. Once here, fix whitespaces and remove nowhere used struct bd_info_ext. Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> Fix U-Boot base address depending on CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8fad55d..ee0c395 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -152,8 +152,8 @@ #define CONFIG_HAS_DATAFLASH 1 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_MAX_DATAFLASH_PAGES 16384 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ @@ -174,11 +174,11 @@ #else #define CFG_ENV_IS_IN_FLASH 1 #ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ -#else #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#else +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ +#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #endif /* CFG_ENV_IS_IN_DATAFLASH */ @@ -186,44 +186,25 @@ #define CFG_LOAD_ADDR 0x21000000 /* default load address */ #ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ -#define CFG_U_BOOT_BASE PHYS_FLASH_1 -#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -#else #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ +#else +#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ +#define CFG_U_BOOT_BASE PHYS_FLASH_1 +#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CFG_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } #define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - #define CFG_HZ 1000 #define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 572a70f..3979dc2 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -139,7 +139,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ +#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 @@ -177,25 +177,6 @@ #define CFG_MAXARGS 32 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif /* __ASSEMBLY__ */ - #define CFG_HZ 1000 #define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ /* AT91C_TC_TIMER_DIV1_CLOCK */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 071d5b7..3f95d9a 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -158,8 +158,8 @@ #undef CONFIG_HAS_DATAFLASH #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 0 -#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CFG_MAX_DATAFLASH_BANKS 0 +#define CFG_MAX_DATAFLASH_PAGES 16384 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ @@ -197,35 +197,16 @@ #define CFG_LOAD_ADDR 0x21000000 /* default load address */ -#define CFG_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600 } +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - #define CFG_HZ 1000 #define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 04f1f24..2d394a8 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -47,7 +47,7 @@ #define CFG_ATMEL_PLL_INIT_BUG 1 #ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_USE_MAIN_OSCILLATOR 1 +#define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 #define MC_PUP_VAL 0x00000000 @@ -127,7 +127,7 @@ #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_NFS | \ @@ -136,7 +136,7 @@ #else #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB | \ @@ -156,7 +156,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 @@ -194,25 +194,6 @@ #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ #define LITTLEENDIAN 1 /* used by usb_ohci.c */ -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif /* __ASSEMBLY__ */ - #define CFG_HZ 1000 #define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ /* AT91C_TC_TIMER_DIV1_CLOCK */

1 0

[U-Boot-Users] Query regarding u-boot source code across versions
by Pharaoh . 24 Apr '07

24 Apr '07

Hi, I am comparing u-boot 1.1.1 and 1.2.0, especially I am checking the omap 730 p2 sample specific code. U-boot 1.1.0 has NAND support but u-boot 1.2.0 doesnt seem to have (atleast from the source code it seems !). u-boot 1.1.1 works as it is for my p2-sample board but u-boot 1.2.0 doesnt work as it is. After some modifications to u-boot 1.2.0 it is working on the same board (I didnt modify the u-boot code related to NAND since I am not booting off NAND, just an observation). My question is, how come the later version of u-boot is not working with the same board which it supports? I know there might be some patches etc but, can I think of it as u-boot 1.2.0 doesn't work for the same board for which old u-boot 1.1.1 used to work without tweaking it a little? Do this kind of things happen or I might be making a mistake? Pharaoh.

1 0

[U-Boot-Users] How to find out u-boot version
by Pharaoh . 24 Apr '07

24 Apr '07

Hi I have old u-boot sources and I am comparing them against the latest u-boot sources. How can I find out the version of the old u-boot sources when I dont know how long and from where they have been downloaded? I have checked the README file but the version is never mentioned there. I know it sounds like a dumb question, please enlighten. -pharaoh.

2 2

[U-Boot-Users] u-boot compile error with arm-elf-20040714
by chenzhixin 24 Apr '07

24 Apr '07

my board is lpc2210,i found a patch from nxp u-boot-lpc2294.patch but when i compile the uboot as : cd u-boot-1.2.0 patch -p1 < ../u-boot-lpc2294.patch make lpc2294_config make the sysytem give me a error : arm-elf-gcc: store.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' arm-elf-gcc: load.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' arm-elf-gcc: cr.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' arm-elf-gcc: b.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' arm-elf-gcc: multi.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' arm-elf-gcc: string.o: No such file or directory arm-elf-gcc: unrecognized option `-MQ' (the 1.1.6 alse give the same error ) after i compile the u-boot-1.1.3,the error is : make[1]: Entering directory `/home/newlad/u-boot-1.1.3/examples' arm-elf-gcc -g -Os -fno-strict-aliasing -fno-common -ffixed-r8 -mshort-load-bytes -msoft-float -D__KERNEL__ -DTEXT_BASE=0x81400000 -I/home/newlad/u-boot-1.1.3/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/local/lib/gcc-lib/arm-elf/2.95.3/include -pipe -DCONFIG_ARM -D__ARM__ -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -Uarm -Wall -Wstrict-prototypes -c -o hello_world.o hello_world.c arm-elf-gcc -g -Os -fno-strict-aliasing -fno-common -ffixed-r8 -mshort-load-bytes -msoft-float -D__KERNEL__ -DTEXT_BASE=0x81400000 -I/home/newlad/u-boot-1.1.3/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/local/lib/gcc-lib/arm-elf/2.95.3/include -pipe -DCONFIG_ARM -D__ARM__ -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -Uarm -Wall -Wstrict-prototypes -c -o stubs.o stubs.c arm-elf-ar crv libstubs.a stubs.o a - stubs.o make[1]: *** No rule to make target `hello_world.srec', needed by `all'. Stop. make[1]: Leaving directory `/home/newlad/u-boot-1.1.3/examples' make: *** [examples] Error 2

3 3

[U-Boot-Users] [patch] Fix NC650 nand support
by Detlev Zundel 24 Apr '07

24 Apr '07

Hi, as noted in the subject attached a patch to fix the nand support for NC650 boards. The 8xx custodian might also pull from my git repo on pollux :) Cheers Detlev -- Those who do not understand Unix are condemned to reinvent it, poorly. - Henry Spencer, University of Toronto Unix hack -- DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany +49 8142 66989 40

4 7

[U-Boot-Users] prob on 2 ethernet working
by Nethra 24 Apr '07

24 Apr '07

Hello, In my board(MPC8248) i have u-boot-1.1.2 configured with FCC1 as configured ethernet port. i m able to download the kernel and ramdisk image from tftpboot. and after that i usually configure the ethernet port by assiging ips eth0:192.168.33.64 and eth1:192.168.174.231 ,subnet mask:255.255.255.0 and default gateway :192.168.32.47 eth0 and 192.168.174.47 eth1. an after that i enable lo (ifconfig lo 127.0.0.1) option in kernel. Now My requiremnt is to have both the ethernet port to be working physically. so i ping to both board ips(192.168.33.64 & 192.168.33.66). But what i found out is if FCC1 is configured as eth port at u-boot time then pinging will work untill FCC1 eth cabel is connected to RJ45 port.ie. cable connected at FCC2 port doesnot have any effect. and it seems to be both the port is dependent on the FCC1 port only. Can anybody suggest what might be the issue? -- View this message in context: http://www.nabble.com/prob-on-2-ethernet-working-tf3636644.html#a10154973 Sent from the Uboot - Users mailing list archive at Nabble.com.

1 0

[U-Boot-Users] 85xx Updates
by Andy Fleming 24 Apr '07

24 Apr '07

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9: Wolfgang Denk (1): Cleanup compiler warnings, update CHANGELOG are found in the git repository at: git://www.denx.de/git/u-boot-mpc85xx.git Please try them out. We've tried them here, but make sure they all work for you. Since we've tested them here, I'm planning to make the pull request official shortly. Andy Fleming (10): Add cpu support for the 8544 Some 85xx cpu cleanups Tweak DDR ECC error counter Only set ddrioovcr for 8548 rev1. Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG Support 1G size on 8548 Enable 8544 support Reworked 85xx speed detection code Add support for the 8568 MDS board Cleaned up some 85xx PCI bugs David Updegraff (1): Add support for treating unknown PHYs as generic PHYs. Jon Loeliger (2): Add MPC8544DS main configuration file. Add MPC8544DS basic port board files. Sergei Shtylyov (1): Fix PCI I/O space mapping on Freescale MPC85x0ADS Timur Tabi (1): 85xx: write MAC address to mac-address and local-mac-address Zang Roy-r61911 (5): u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS u-boot: Fix CPU2 errata on MPC8548CDS board u-boot: Fix the 85xxcds tsec bug u-boot: v2: Remove the fixed TLB and LAW entrynubmer u-boot: Fix e500 v2 core reset bug ebony.zhu(a)freescale.com (1): u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default MAKEALL | 8 +- Makefile | 6 + board/cds/mpc8541cds/mpc8541cds.c | 9 +- board/cds/mpc8541cds/u-boot.lds | 1 + board/cds/mpc8548cds/init.S | 77 +++-- board/cds/mpc8548cds/mpc8548cds.c | 16 +- board/cds/mpc8548cds/u-boot.lds | 1 + board/cds/mpc8555cds/mpc8555cds.c | 11 +- board/cds/mpc8555cds/u-boot.lds | 1 + board/freescale/mpc8544ds/Makefile | 58 ++++ board/freescale/mpc8544ds/config.mk | 32 ++ board/freescale/mpc8544ds/init.S | 243 ++++++++++++++ board/freescale/mpc8544ds/mpc8544ds.c | 205 ++++++++++++ board/freescale/mpc8544ds/u-boot.lds | 148 ++++++++ board/mpc8540ads/init.S | 4 +- board/mpc8560ads/init.S | 4 +- board/mpc8568mds/Makefile | 58 ++++ board/mpc8568mds/bcsr.c | 49 +++ board/mpc8568mds/bcsr.h | 99 ++++++ board/mpc8568mds/config.mk | 30 ++ board/mpc8568mds/ft_board.c | 45 +++ board/mpc8568mds/init.S | 258 ++++++++++++++ board/mpc8568mds/mpc8568mds.c | 288 ++++++++++++++++ board/mpc8568mds/u-boot.lds | 152 +++++++++ board/mpc8572/.depend | 51 +++ board/mpc8572/Makefile | 55 +++ board/mpc8572/config.mk | 30 ++ board/mpc8572/init.S | 245 ++++++++++++++ board/mpc8572/init.o | Bin board/mpc8572/libmpc8572.a | Bin board/mpc8572/mpc8572.c | 235 +++++++++++++ board/mpc8572/mpc8572.o | Bin board/mpc8572/u-boot.lds | 149 +++++++++ cpu/mpc85xx/cpu.c | 69 ++++- cpu/mpc85xx/cpu_init.c | 2 - cpu/mpc85xx/pci.c | 8 +- cpu/mpc85xx/spd_sdram.c | 31 ++- cpu/mpc85xx/speed.c | 44 +-- cpu/mpc85xx/start.S | 16 +- drivers/tsec.c | 50 +++- drivers/tsec.h | 3 +- include/asm-ppc/mmu.h | 5 +- include/asm-ppc/processor.h | 12 +- include/configs/MPC8540ADS.h | 5 +- include/configs/MPC8541CDS.h | 2 +- include/configs/MPC8544DS.h | 591 +++++++++++++++++++++++++++++++++ include/configs/MPC8548CDS.h | 30 ++- include/configs/MPC8560ADS.h | 8 +- include/configs/MPC8568MDS.h | 505 ++++++++++++++++++++++++++++ 49 files changed, 3801 insertions(+), 148 deletions(-) create mode 100644 board/freescale/mpc8544ds/Makefile create mode 100644 board/freescale/mpc8544ds/config.mk create mode 100644 board/freescale/mpc8544ds/init.S create mode 100644 board/freescale/mpc8544ds/mpc8544ds.c create mode 100644 board/freescale/mpc8544ds/u-boot.lds create mode 100644 board/mpc8568mds/Makefile create mode 100644 board/mpc8568mds/bcsr.c create mode 100644 board/mpc8568mds/bcsr.h create mode 100644 board/mpc8568mds/config.mk create mode 100644 board/mpc8568mds/ft_board.c create mode 100644 board/mpc8568mds/init.S create mode 100644 board/mpc8568mds/mpc8568mds.c create mode 100644 board/mpc8568mds/u-boot.lds create mode 100644 board/mpc8572/.depend create mode 100644 board/mpc8572/Makefile create mode 100644 board/mpc8572/config.mk create mode 100644 board/mpc8572/init.S create mode 100644 board/mpc8572/init.o create mode 100644 board/mpc8572/libmpc8572.a create mode 100644 board/mpc8572/mpc8572.c create mode 100644 board/mpc8572/mpc8572.o create mode 100644 board/mpc8572/u-boot.lds create mode 100644 include/configs/MPC8544DS.h create mode 100644 include/configs/MPC8568MDS.h

1 0

[U-Boot-Users] Proposal for patch to configure network parameters
by Ulf Samuelsson 23 Apr '07

23 Apr '07

U-Boot has a number of network parameters like CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_GATEWAYIP CONFIG_NETMASK etc. While these can be defined in an "include/configs/<board>.h", it would be nice to be able to define this in a separate file since they are really not board specific. They are more dependent on the network where the machine is built. Such a file I.E: "include/custom.h", would get included by the automatically generated "config.h", after the board specific file is included, to allow it to override any values. In the normal distribution, this file would be empty so it will not affect any current boards. This would allow you to automatically analyse your machine to find out your host ipaddress, and add an appropriate ipaddr, netmask, gatewayip etc and overwrite the file with a custom default network configuration before you build. There may be other things which you want to set depending on your host environment. In short patches would be something similar to: +++include/custom.h + # +++mkconfig echo "#include <configs/$1.h>" >>config.h + echo "#include <custom.h>" >>config.h exit 0 If the idea seems acceptable, I will go ahead and generate the real patches. Best Regards Ulf Samuelsson

8 50

[U-Boot-Users] PXA270 - error: invalid lvalue in assignment
by hbmeier＠mail.uni-paderborn.de 23 Apr '07

23 Apr '07

Hi, I can't compile the adsvix board with eldk 4.1: error: invalid lvalue in assignment I have copy some changes from the linux pxa-regs.h to fix this. regards, stefan

1 0