February 2007 - U-Boot

[U-Boot-Users] Help Needed !!!
by Deepak $ehrawat 27 Feb '07

27 Feb '07

Hi all, I am new to U-Boot. I am trying to port U-Boot on to a proprietary board based on MPC8560. I am facing following problems : 1) PHY device is not being configured ( or initialized ) in ether_fcc.c ( cpu/mpc85xx directory ). Why? Aren't we suppose to configure PHY device when FCC is being used as an ethernet device ? ( as is being done in case of TSEC in driver/tsec.c ) 2) Has anyone configured BCM5464 ( a PHY device ) connected to TSEC ? If yes, then can you please send to me the related files (e.g driver/tsec.c ) Regards, DEEPAK SEHRAWAT

3 2

Re: [U-Boot-Users] Testing of Uboot image from fedora5 through a c program
by Amnon Cohen 27 Feb '07

27 Feb '07

have a look at image_info in common/cmd_bootm.c Good luck, Amnon** > > On 2/27/07, MoonMoon Ghosh < moonni_86(a)yahoo.com > wrote: > > > Hi, > > Thank you very much Daniel for your information. > > But My requirement is quite different.I know the use if iminfo and > > mkimage but I can not use those commands. Actually I have to test the Uboot > > kernel Image(checking of crc and other many other fields) from my fedora 5 > > through a c program in which kernel image file need to be passed as > > command line argument.I can use the header files of Uboot source code > > like image.h and common.h and also the c code of Uboot source but I > > have to write my own program and need to compile using gcc. > > I am trying with the source of mkimage.c but I want also the source of > > iminfo but I can not find it. > > Hope my problem is now clear. Want valuable information and advice from > > you. > > Thanking you in advance. > > Suhas > > > > ------------------------------ > > Need Mail bonding? > > Go to the Yahoo! Mail Q&A<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOAR…>for great > > tips from Yahoo! Answers<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOAR…>users. > > > > > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net 's Techsay panel and you'll get the chance to share > > your > > opinions on IT & business topics through brief surveys-and earn cash > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > U-Boot-Users mailing list > > U-Boot-Users(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > > >

1 0

[U-Boot-Users] Can't Compile u-boot-1.1.5_atmel_1.2!!
by 25an 27 Feb '07

27 Feb '07

Hi! I am trying to compile u-boot-1.1.5 for at91sam9261ek with arm926ejs cpu. I am using the eldk cross toolchain 4.1 which is using gcc 4.0.0. When I try to compile u-boot I get following error 25an@25an-desktop :/opt/x-compile/eldk/workingare a/u-boot-1.1.5_atmel_1.2$ make ARCH=arm CROSS_COMPILE=arm-linux- for dir in tools examples post post/cpu ; do make -C $dir _depend ; done make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/tools' make[1]: Nothing to be done for `_depend'. make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/tools' make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/examples' make[1]: Nothing to be done for `_depend'. make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/examples' make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/post' make[1]: Nothing to be done for `_depend'. make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/post' make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/post/cpu' make[1]: Nothing to be done for `_depend'. make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/post/cpu' make -C tools all make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/tools' make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/tools' make -C examples all make[1]: Entering directory `/opt/x-compile/eldk/workingarea/u-boot-1.1.5_atmel_1.2/examples ' arm-linux-gcc -g -Os -fno-strict-aliasing -fno-common -ffixed-r8 -msoft-float -fno-strict-aliasing -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x23f00000 -I/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/x-compile/eldk/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe -DCONFIG_ARM -D__ARM__ -march=armv4 -mabi=apcs-gnu -mapcs-32 -march=armv5te -mtune=arm926ejs -Wall -Wstrict-prototypes -c -o hello_world.o hello_world.c cc1: error: invalid option 'apcs-32' hello_world.c:1: error: bad value (arm926ejs) for -mtune= switch make[1]: *** [hello_world.o] Error 1 make[1]: Leaving directory `/opt/x-compile/eldk/workingarea/u- boot-1.1.5_atmel_1.2/examples' make: *** [examples] Error 2 Any ideas? I would also appreciate any suggestion how to locate the error since right now I have not even managed to locate were the flag is set. Thanks -- View this message in context: http://www.nabble.com/Can%27t-Compile-u-boot-1.1.5_atmel_1.2%21%21-tf329925… Sent from the Uboot - Users mailing list archive at Nabble.com.

1 0

[U-Boot-Users] New to Uboot
by swapnil borgaonkar 27 Feb '07

27 Feb '07

Hi, I'm new to Uboot... Where do i Get started. I want to port Uboot to a custom S3C2412 module. ( 32MB Nand Flash + 64 MB SDram ) I can compile for ARM. Regards, Swapnil

2 1

[U-Boot-Users] [DNX#2007022742000042] [PATCH] add output of 'size' to bui [...]
by DENX Support System 27 Feb '07

27 Feb '07

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2007022742000042] was created: <snip> > On 2/26/07, Wolfgang Denk <wd(a)denx.de> wrote: > > One more question. You're just duplicating the function of the > > MAKEALL script. Is there any reason you cannot use this instead? > > I don't usually run MAKEALL, I didn't even notice it in there. > > > Frankly, I don't think this belongs into the standard make output. > > It would have been nice had you mentioned it before I took the time to > fix the patch... > > -- > Hardware, n.: > The parts of a computer system that can be kicked. </snip> Your U-Boot support team

1 0

[U-Boot-Users] [DNX#2007022742000042] [PATCH] add output of 'size' to build
by U-Boot patch tracking system 27 Feb '07

27 Feb '07

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2007022742000042]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [DNX#2007022742000033] [PATCH] add output of 'size' to build
by U-Boot patch tracking system 27 Feb '07

27 Feb '07

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2007022742000033]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [DNX#2007022742000033] [PATCH] add output of 'size' to bui [...]
by DENX Support System 27 Feb '07

27 Feb '07

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2007022742000033] was created: <snip> > In message <c166aa9f0702261642q5b2eab1bo852502891af43847(a)mail.gmail.com> > you wrote: > > > > OK. New version is attached that tests for the silent flag and omits > > running the command if it is set. If you would, maybe add a comment > > at the top of the makefile with a note about the silent flag. > > One more question. You're just duplicating the function of the > MAKEALL script. Is there any reason you cannot use this instead? > > Frankly, I don't think this belongs into the standard make output. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk > Office: Kirchenstr. 5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > The day-to-day travails of the IBM programmer are so amusing to most > of us who are fortunate enough never to have been one - like watching > Charlie Chaplin trying to cook a shoe. </snip> Your U-Boot support team

1 0

[U-Boot-Users] [DNX#2007022742000024] [PATCH] add output of 'size' to bui [...]
by DENX Support System 27 Feb '07

27 Feb '07

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2007022742000024] was created: <snip> > On 2/26/07, Wolfgang Denk <wd(a)denx.de> wrote: > > NAK. > > > > This patch violates the rule that "make -s" must not produce any > > output for succcesful builds. > > OK. New version is attached that tests for the silent flag and omits > running the command if it is set. If you would, maybe add a comment > at the top of the makefile with a note about the silent flag. > > -- > Hardware, n.: > The parts of a computer system that can be kicked. </snip> Your U-Boot support team

1 0

[U-Boot-Users] [DNX#2007022742000024] [PATCH] add output of 'size' to build
by U-Boot patch tracking system 27 Feb '07

27 Feb '07

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2007022742000024]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0