April 2006 - U-Boot

[U-Boot-Users] CF card support issue
by tqiu 10 Apr '06

10 Apr '06

Hello all, I support the CF card in u-boot, and met this issue: I used the memory mapped addressing. When set 0xE0(use LBA) to the Drive/Head Register, then read it, it was set 0xE0 correctly. Then I need check the status of the CF card, read the STATUS Register, It always 0x51(ready to accept cmd, card ready, something error). Then I read the Error Register it always 0x04(cmd aborted or invalid cmd). But that configuration was not a cmd. Why it always got this error? Does someone ever seed this? Some suggests? Thank you very much! Terry

1 0

[U-Boot-Users] Linux-Hangs
by Ganesh Ramachandran 09 Apr '06

09 Apr '06

Hi all, I am using Kernel 2.6.16 with U-Boot 1.1.4. I am using ARM IntegratorCP Simulator. I created Objects with mkimage and while booting the image i'm getting the information as below ## Checking Image at 00007fc0 ... Image Name: Linux 2.6.16 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1152816 Bytes = 1.1 MB Load Address: 00007fc0 Entry Point: 00008000 Verifying Checksum ... OK Integrator-CP # Integrator-CP # bootm ## Booting image at 00007fc0 ... Image Name: Linux 2.6.16 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1152816 Bytes = 1.1 MB Load Address: 00007fc0 Entry Point: 00008000 XIP Kernel Image ... OK Starting kernel ... Uncompressing Linux............................................................................done, booting the kernel ===> It hangs here. I tried the FAQ from the following address, http://www.denx.de/wiki/DULG/LinuxHangsAfterUncompressingKernel But there is no use, I am using latest versions and my parameters are passed perfectly, the bd structure is also good and I tried with both clock informations. Did I miss something? I dont know where will be the problem. Where is the problem either in u-boot loader or in kernel? Could you help me to give clue for atleast how to trace the error? I am dumping in this error for last four weeks. Any help will be appreciated!!

2 3

[U-Boot-Users] Re: [DNX#2006040842000022] PATCH: CPC0_PCI init [...]
by U-Boot patch tracking system 08 Apr '06

08 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040842000022]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] Re: [DNX#2006040842000022] PATCH: CPC0_PCI initialization
by DENX Support System 08 Apr '06

08 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040842000022] was created: <snip> > This was discussed in the list a while ago but a patch was not submitted > > AFAIK. I've come up with a patch that does not break any existing boards > and > naming of the macro is in line with other U-Boot macros for similar > settings. > > Re: http://sf.net/mailarchive/message.php?msg_id=14093274 > Re: http://sf.net/mailarchive/message.php?msg_id=14095552 > > I am currently involved with bring-up of an 405EP based board. For our > board we do actually need CPC0_PCI[SPE] set to "1" to configure > PerWE*/PCI_INT* as PerWE* so write cycles to our flash could be take > place > (even for just CFI detection) > > CHANGELOG: > > * (ppc405ep) Add support for board configuration of CPC0_PCI register > This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE* > > Sign-off-by: Tolunay Orkun <listmember(a)orkun.us> > > diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S > index 948de43..316285a 100644 > --- a/cpu/ppc4xx/start.S > +++ b/cpu/ppc4xx/start.S > @@ -1526,7 +1526,8 @@ ppc405ep_init: > mtdcr ebccfgd,r3 > #endif > > - addi r3,0,CPC0_PCI_HOST_CFG_EN > +#ifndef CFG_CPC0_PCI > + li r3,CPC0_PCI_HOST_CFG_EN > #ifdef CONFIG_BUBINGA > /* > !----------------------------------------------------------------------- > @@ -1541,6 +1542,9 @@ ppc405ep_init: > beq ..pci_cfg_set /* if not set, then bypass reg write*/ > #endif > ori r3,r3,CPC0_PCI_ARBIT_EN > +#else > + li r3,CFG_CPC0_PCI > +#endif > ..pci_cfg_set: > mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ </snip> Your U-Boot support team

1 0

[U-Boot-Users] PATCH: CPC0_PCI initialization
by Tolunay Orkun 08 Apr '06

08 Apr '06

This was discussed in the list a while ago but a patch was not submitted AFAIK. I've come up with a patch that does not break any existing boards and naming of the macro is in line with other U-Boot macros for similar settings. Re: http://sf.net/mailarchive/message.php?msg_id=14093274 Re: http://sf.net/mailarchive/message.php?msg_id=14095552 I am currently involved with bring-up of an 405EP based board. For our board we do actually need CPC0_PCI[SPE] set to "1" to configure PerWE*/PCI_INT* as PerWE* so write cycles to our flash could be take place (even for just CFI detection) CHANGELOG: * (ppc405ep) Add support for board configuration of CPC0_PCI register This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE* Sign-off-by: Tolunay Orkun <listmember(a)orkun.us> diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 948de43..316285a 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1526,7 +1526,8 @@ ppc405ep_init: mtdcr ebccfgd,r3 #endif - addi r3,0,CPC0_PCI_HOST_CFG_EN +#ifndef CFG_CPC0_PCI + li r3,CPC0_PCI_HOST_CFG_EN #ifdef CONFIG_BUBINGA /* !----------------------------------------------------------------------- @@ -1541,6 +1542,9 @@ ppc405ep_init: beq ..pci_cfg_set /* if not set, then bypass reg write*/ #endif ori r3,r3,CPC0_PCI_ARBIT_EN +#else + li r3,CFG_CPC0_PCI +#endif ..pci_cfg_set: mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/

1 0

[U-Boot-Users] Re: [DNX#2006040842000013] PATCH: CFG_GPIO0_OR and CFG_GPIO0_ODR to setup GPI [...]
by DENX Support System 08 Apr '06

08 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040842000013] was created: <snip> > Re: http://sf.net/mailarchive/forum.php?thread_id=10122605&forum_id=12898 > > CHANGELOG: > > * (ppc4xx) Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely. > - Add configuration of Open Drain GPIO Output selection > - Add configuration of initial value of GPIO output pins > > Sign-off-by: Tolunay Orkun <listmember(a)orkun.us> > > diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c > index 1a139d7..761fcf7 100644 > --- a/cpu/ppc4xx/cpu_init.c > +++ b/cpu/ppc4xx/cpu_init.c > @@ -115,6 +115,12 @@ cpu_init_f (void) > /* > * GPIO0 setup (select GPIO or alternate function) > */ > +#if defined(CFG_GPIO0_OR) > + out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output > pins */ > +#endif > +#if defined(CFG_GPIO0_ODR) > + out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */ > +#endif > out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ > out32(GPIO0_OSRL, CFG_GPIO0_OSRL); > out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */ </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040842000013] PATCH: CFG_GPIO0_OR [...]
by U-Boot patch tracking system 08 Apr '06

08 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040842000013]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] PATCH: CFG_GPIO0_OR and CFG_GPIO0_ODR to setup GPIO completely
by Tolunay Orkun 08 Apr '06

08 Apr '06

Re: http://sf.net/mailarchive/forum.php?thread_id=10122605&forum_id=12898 CHANGELOG: * (ppc4xx) Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely. - Add configuration of Open Drain GPIO Output selection - Add configuration of initial value of GPIO output pins Sign-off-by: Tolunay Orkun <listmember(a)orkun.us> diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 1a139d7..761fcf7 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -115,6 +115,12 @@ cpu_init_f (void) /* * GPIO0 setup (select GPIO or alternate function) */ +#if defined(CFG_GPIO0_OR) + out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */ +#endif +#if defined(CFG_GPIO0_ODR) + out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */ +#endif out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ out32(GPIO0_OSRL, CFG_GPIO0_OSRL); out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */

1 0

[U-Boot-Users] AMD 29LV160DB wrong ID
by Hurricane555 07 Apr '06

07 Apr '06

Has anyone this Flash in use? Could you sent your settings!? -- View this message in context: http://www.nabble.com/AMD-29LV160DB-wrong-ID-t1385577.html#a3721580 Sent from the Uboot - Users forum at Nabble.com.

1 1

[U-Boot-Users] Compiled system and target board mismatched while make U-boot image..
by Charles C.K.Lai 07 Apr '06

07 Apr '06

Dear Thomas, I make my U-boot image from PC to DBAu1550, I used GCC 3.4.4, with mipsel-linux-sdelinux-6.03.01-1 toolchain, while I make my U-boot image with U-boot-1.1.4, I got the following messages: mipsel-linux-ld: hello_world.o: compiled for a little endian system and target is big endian mipsel-linux-ld: hello_world.o: endianness incompatible with that of the selected emulation mipsel-linux-ld: failed to merge target specific data of file hello_world.o I searched for related articles on U-Boot Website and Mailing lists, but I can't find out any helpful messages to fix the problem. Did I miss some patches? Do you have the reference material for this problem? Thanks a lot. Charles C.K. Lai

4 7

[U-Boot-Users] ppc4xx: Initializing GPIO0_OR and GPIO0_ODR
by Tolunay Orkun 07 Apr '06

07 Apr '06

(Note: This is specific to PPC405EP but it might be applicable to other 4xx cpus) On a PPC405EP based boards, U-Boot is initializing below registers to select between primary and alternate functions of the GPIO pins (e.g. GPIO10 vs CS1) using the CFG_CPIO0_... macros defined in the board config file. GPIO0_TCR, GPIO0_OSRH, GPIO0_OSRL, GPIO0_TSRH, GPIO0_TSRL, GPIO0_ISR1H, GPIO0_ ISR1L This much is sufficient for alternate function programming. However, if a the GPIO pin is actually used as GPIO output pin, the initial signal level presented happens to be "0" which may not be appropriate for some implementations. I propose to introduce CFG_GPIO0_OR and CFG_CPIO0_ODR macros that could be defined in the appropriate board config file and initialize GPIO0_OR and GPIO0_ODR before GPIO0_TCR. If these macros are undefined the existing code behavior could be maintained so the additional macros would not break any existing board or add any additional code. I will be introducing a patch to take care of this but I wanted to get feedback first. FYI: For our board, we have a GPIO line connected to an active low reset line of a custom ASIC chip. There is a pull-up so during the time while this pin is tri-state/input we should not reset the ASIC automatically while management processor is booting. Our ASIC can operate independently while the management processor is booting.

2 1

Re: [DNX#2006040542000055] [U-Boot-Users] Re: [patch] add .gitign ore
by DENX Support System 06 Apr '06

06 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006040542000055] was entered through the web interface: <snip> > I think I may have found the configurations in the source code under > Lite5200_config. I apologize. > > Mike > > -----Original Message----- > From: u-boot-users-admin(a)lists.sourceforge.net > [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf Of DENX > Support > System > Sent: Thursday, April 06, 2006 2:50 PM > To: u-boot-users(a)lists.sourceforge.net > Subject: Re: [DNX#2006040542000055] [U-Boot-Users] Re: [patch] add > .gitign > ore > > Hello list, > > inside the automatic U-Boot patch tracking system a follow up > to [DNX#2006040542000055] was entered through the web interface: > > <snip> > > Hey Wolfgang, > > > > A representative from Embedded Planet told me today that U-Boot > > v1.1.4 had a BSP for a Lite5200 board. I can't seem to find this on > > your > > Wiki, the documentation, nor the source code. Is this guy blowing > > smoke? > > > > Mike > > > > -----Original Message----- > > From: u-boot-users-admin(a)lists.sourceforge.net > > [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf Of DENX > > Support > > System > > Sent: Wednesday, April 05, 2006 11:00 AM > > To: u-boot-users(a)lists.sourceforge.net > > Subject: [U-Boot-Users] Re: [DNX#2006040542000055] [patch] add > > .gitignore > > > > Hello list, > > > > inside the automatic U-Boot patch tracking system a follow up > > to [DNX#2006040542000055] was entered through the web interface: > > > > <snip> > > > Dear Hiroshi Ito, > > > > > > in message <20060405.233002.48531924.ito(a)mlb.co.jp> you wrote: > > > > > > > > * add .gitignore > > > > Patch by Hiroshi Ito, 5 Apr 2006 > > > > > > I'm sorry, but for reasons explained before (see mailing list > > > archive) I do not *want* to have any .gitignore files in the U-Boot > > > tree. > > > > > > Please bear with me, but I'm so used to this style of working that I > > > don't to change it. > > > > > > Patch rejected. > > > > > > Best regards, > > > > > > Wolfgang Denk > > > > > > -- > > > Software Engineering: Embedded and Realtime Systems, Embedded Linux > > > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > > > You see things; and you say ``Why?'' But I dream things that never > > > were; and I say ``Why not?'' > > > - George Bernard Shaw _Back to Methuselah_ (1921) pt. 1, act 1 > > </snip> > > > > Your U-Boot support team > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a groundbreaking scripting > > language > > that extends applications into web and mobile media. Attend the live > > webcast > > and join the prime developer group breaking into this new coding > > territory! > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > > _______________________________________________ > > U-Boot-Users mailing list > > U-Boot-Users(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/u-boot-users > </snip> > > Your U-Boot support team > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language > that extends applications into web and mobile media. Attend the live </snip> Your U-Boot support team

1 0

Re: [DNX#2006040542000055] [U-Boot-Users] Re: [patch] add .gitign ore
by DENX Support System 06 Apr '06

06 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006040542000055] was entered through the web interface: <snip> > Hey Wolfgang, > > A representative from Embedded Planet told me today that U-Boot > v1.1.4 had a BSP for a Lite5200 board. I can't seem to find this on > your > Wiki, the documentation, nor the source code. Is this guy blowing > smoke? > > Mike > > -----Original Message----- > From: u-boot-users-admin(a)lists.sourceforge.net > [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf Of DENX > Support > System > Sent: Wednesday, April 05, 2006 11:00 AM > To: u-boot-users(a)lists.sourceforge.net > Subject: [U-Boot-Users] Re: [DNX#2006040542000055] [patch] add > .gitignore > > Hello list, > > inside the automatic U-Boot patch tracking system a follow up > to [DNX#2006040542000055] was entered through the web interface: > > <snip> > > Dear Hiroshi Ito, > > > > in message <20060405.233002.48531924.ito(a)mlb.co.jp> you wrote: > > > > > > * add .gitignore > > > Patch by Hiroshi Ito, 5 Apr 2006 > > > > I'm sorry, but for reasons explained before (see mailing list > > archive) I do not *want* to have any .gitignore files in the U-Boot > > tree. > > > > Please bear with me, but I'm so used to this style of working that I > > don't to change it. > > > > Patch rejected. > > > > Best regards, > > > > Wolfgang Denk > > > > -- > > Software Engineering: Embedded and Realtime Systems, Embedded Linux > > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > > You see things; and you say ``Why?'' But I dream things that never > > were; and I say ``Why not?'' > > - George Bernard Shaw _Back to Methuselah_ (1921) pt. 1, act 1 > </snip> > > Your U-Boot support team > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language > that extends applications into web and mobile media. Attend the live > webcast > and join the prime developer group breaking into this new coding > territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users </snip> Your U-Boot support team

1 0

[U-Boot-Users] Problem with SystemACE cmd_ace.c patch of 7 Aug 2005
by Stephen Williams 06 Apr '06

06 Apr '06

I have a problem with some changes you (Jeff) did in u-boot related to compact flash. Can you help me understand why you put this: + /* Reset the configruation controller */ + val = ace_readw(0x18); + val|=0x0080; + ace_writew(val, 0x18); + into the systemace_read function? This is causing me grief, with the linux SystemACE indicating an error: JTAG controller couldn't read configuration from the CompactFlash while booting Linux with a ext3 partition on the SystemACE CF. When I comment those lines out of cmd_ace.c, my boot starts to work again. I suspect this "reset" of the config portion of the systemace is causing the SystemACE to start trying again to configure when the reset is released at the end of a block read. I would so like to remove that little snippet of code, but if you had a positive reason why it should be there, we need to negotiate. -- Steve Williams "The woods are lovely, dark and deep. steve at icarus.com But I have promises to keep, http://www.icarus.com and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep."

2 2

Re: [DNX#2006040542000055] [U-Boot-Users] Re: [patch] add .gitignore
by DENX Support System 06 Apr '06

06 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006040542000055] was entered through the web interface: <snip> > Dear Wolfgang Denk > > > > > * add .gitignore > > > > Patch by Hiroshi Ito, 5 Apr 2006 > > > > > > I'm sorry, but for reasons explained before (see mailing list > > > archive) I do not *want* to have any .gitignore files in the U-Boot > > > tree. > > Ok. I understand your opinion. > If I am a maintainer, I might think the same. > > But, I think .gitignore is usefull for a developer. > because I change a lots of files to put debug message for > understanding u-boot or findings bugs. > and Sometimes unexpected chenges are made by mistakes. > I check it with "git status", so I like to use this command easily. > > And if there is a maintaind .gitignore file, It is very usefull. > > How about this patch. > not .gitignore but maintaind as gitignore. > > Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> > > CHANGELOG: > > * add gitignore > Patch by Hiroshi Ito, 6 Apr 2006 > > Please consider to marge. > > > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040542000055] [patch] add .gitignore
by DENX Support System 06 Apr '06

06 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006040542000055] was entered through the web interface: <snip> > Dear Hiroshi Ito, > > in message <20060405.233002.48531924.ito(a)mlb.co.jp> you wrote: > > > > * add .gitignore > > Patch by Hiroshi Ito, 5 Apr 2006 > > I'm sorry, but for reasons explained before (see mailing list > archive) I do not *want* to have any .gitignore files in the U-Boot > tree. > > Please bear with me, but I'm so used to this style of working that I > don't to change it. > > Patch rejected. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > You see things; and you say ``Why?'' But I dream things that never > were; and I say ``Why not?'' > - George Bernard Shaw _Back to Methuselah_ (1921) pt. 1, act 1 </snip> Your U-Boot support team

2 1

[U-Boot-Users] confirm 747996
by zhangwpxx＠sina.com 06 Apr '06

06 Apr '06

confirm 747996 =================================================================== 注册新浪2G免费邮箱（ http://mail.sina.com.cn/chooseMode.html ）

1 0

[U-Boot-Users] Linux with U-Boot
by Ganesh Ramachandran 06 Apr '06

06 Apr '06

I am using U-Boot loader 1.1.4 and I am using IntegratorCP ARM Boards. I am facing the problems while booting, I debugged my Kernel with Low Level Debugging.I think My problem is in 'Call_Kernel' Function in head.S and I am using kernel 2.6.16. ## Checking Image at 00007fc0 ... Image Name: Linux 2.6.16 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1152816 Bytes = 1.1 MB Load Address: 00007fc0 Entry Point: 00008000 Verifying Checksum ... OK Integrator-CP # setenv bootargs root=/dev/mtdblock2 mem=128M console=ttyAM0,38400n8 Integrator-CP # Integrator-CP # bootm ## Booting image at 00007fc0 ... Image Name: Linux 2.6.16 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1152816 Bytes = 1.1 MB Load Address: 00007fc0 Entry Point: 00008000 XIP Kernel Image ... OK Starting kernel ... Uncompressing Linux............................................................................ done, booting the kernel . 410FB760:00000113:00050078 ^^^^^^^^^^^^_________________________Processor ID seeems to be OK ^^^^^^^^^^^_________________Architecture ID is also ok ^^^^^^^^^^^________What is Control Register? Is this related with Params? If it is Param my param is wrong here. 0013AB68-0037EF68>00008000 ^^^^^^^^^^^_______Kernel Execution Address is Ok This is my print statement in head.S in 'call_kernel'. :00000000%00000000@00000040*00008000 ^^^^^^^^^^^__________________________r0 is 0 Perfect ^^^^^^^^^^^^________________Here the machine ID is wrong. I want to get as 0x113. But I am getting 0. ^^^^^^^^^^^^______HOw to check the ATAG ID. Is it related with Params? ^^^^^^^^_ Kernel Execution ID seems to be Ok. Please anybody help me. I am new to u-boot and kernel. Thanks & Regards, Ganesh Ramachandran.

2 1

[U-Boot-Users] [PATCH] objcopy for srec and bin files should be done on .o files
by Martin Hicks 06 Apr '06

06 Apr '06

The Makefile rule for creating srec and bin files fails for me frequently. I believe that we should be doing the ojbcopy on the .o files, not the ELF binary. Signed-off-by: Martin Hicks <mort(a)bork.org> --- examples/Makefile | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) 35b9e5c91127f1428c6e207fe2bca76782ca5b36 diff --git a/examples/Makefile b/examples/Makefile index 2f8c4c4..36fe2a3 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -123,10 +123,10 @@ $(LIB): .depend $(LIBOBJS) $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ -o $@ -e $(<:.o=) $< $(LIB) \ -L$(gcclibdir) -lgcc -%.srec: % +%.srec: %.o $(OBJCOPY) -O srec $< $@ 2>/dev/null -%.bin: % +%.bin: %.o $(OBJCOPY) -O binary $< $@ 2>/dev/null ######################################################################### -- 1.2.4 -- Martin Hicks || mort(a)bork.org || PGP/GnuPG: 0x4C7F2BEE

2 5

[U-Boot-Users] Re: [patch] add .gitignore
by ito＠mlb.co.jp 05 Apr '06

05 Apr '06

Hello add .gitignore Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> CHANGELOG: * add .gitignore Patch by Hiroshi Ito, 5 Apr 2006 -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff -x .git -uNr u-boot.git.org/.gitignore u-boot.git/.gitignore --- u-boot.git.org/.gitignore 1970-01-01 09:00:00.000000000 +0900 +++ u-boot.git/.gitignore 2006-03-31 17:04:43.000000000 +0900 @@ -0,0 +1,16 @@ +# Normal rules +*.o +*.a +.depend +*.bin +*.srec +*.map + +# auto generated files +u-boot +TAGS +tags +include/config.h +include/config.mk +include/asm +include/version_autogenerated.h diff -x .git -uNr u-boot.git.org/examples/.gitignore u-boot.git/examples/.gitignore --- u-boot.git.org/examples/.gitignore 1970-01-01 09:00:00.000000000 +0900 +++ u-boot.git/examples/.gitignore 2006-03-31 17:03:07.000000000 +0900 @@ -0,0 +1 @@ +hello_world diff -x .git -uNr u-boot.git.org/tools/.gitignore u-boot.git/tools/.gitignore --- u-boot.git.org/tools/.gitignore 1970-01-01 09:00:00.000000000 +0900 +++ u-boot.git/tools/.gitignore 2006-03-30 19:33:33.000000000 +0900 @@ -0,0 +1,8 @@ +bmp_logo +crc32.c +envcrc +environment.c +gen_eth_addr +img2srec +inca-swap-bytes +mkimage

2 1

[U-Boot-Users] Re: [DNX#2006040542000055] [patch] add .gitignore
by DENX Support System 05 Apr '06

05 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040542000055] was created: <snip> > Hello > > add .gitignore > > Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> > > CHANGELOG: > > * add .gitignore > Patch by Hiroshi Ito, 5 Apr 2006 > > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040542000055] [patch] add .git [...]
by U-Boot patch tracking system 05 Apr '06

05 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040542000055]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] Re: [DNX#2006040542000046] [patch] mkconfig crates bad symlink
by DENX Support System 05 Apr '06

05 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040542000046] was created: <snip> > Hello > > mkconfig creates include/asm-*/arch. > but some board this symbolic link is broken and not necessary. > with this patch, mkconfig wil create a sym-link when there is a > directory to link. > > Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> > > CHANGELOG: > > * mkconfig will not create broken symlink. > Patch by Hiroshi Ito, 5 Apr 2006 > > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040542000046] [patch] mkconfig cra [...]
by U-Boot patch tracking system 05 Apr '06

05 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040542000046]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [patch] mkconfig crates bad symlink
by ito＠mlb.co.jp 05 Apr '06

05 Apr '06

Hello mkconfig creates include/asm-*/arch. but some board this symbolic link is broken and not necessary. with this patch, mkconfig wil create a sym-link when there is a directory to link. Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> CHANGELOG: * mkconfig will not create broken symlink. Patch by Hiroshi Ito, 5 Apr 2006 -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff -x .git -uNr u-boot.git.org/mkconfig u-boot.git/mkconfig --- u-boot.git.org/mkconfig 2006-04-05 06:49:16.000000000 +0900 +++ u-boot.git/mkconfig 2006-04-04 07:18:43.000000000 +0900 @@ -33,7 +33,9 @@ rm -f asm-$2/arch if [ -z "$6" -o "$6" = "NULL" ] ; then - ln -s arch-$3 asm-$2/arch + if [ -d arch-$3 ]; then + ln -s arch-$3 asm-$2/arch + fi else ln -s arch-$6 asm-$2/arch fi

1 0

[U-Boot-Users] Re: [DNX#2006040542000037] [patch] Support IDE secondary disk without primary [...]
by DENX Support System 05 Apr '06

05 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040542000037] was created: <snip> > Hello > > Current u-boot does not search disks on secondary port if there is no > disks > on primary port. > > this patch fixes this problem. > > Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> > > CHANGELOG: > > * Support IDE secondary disk without primary disk. > Patch by Hiroshi Ito, 5 Apr 2006 </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040542000037] [patch] Support IDE [...]
by U-Boot patch tracking system 05 Apr '06

05 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040542000037]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [patch] Support IDE secondary disk without primary disk.
by ito＠mlb.co.jp 05 Apr '06

05 Apr '06

Hello Current u-boot does not search disks on secondary port if there is no disks on primary port. this patch fixes this problem. Signed-off-by: Hiroshi Ito <ito(a)mlb.co.jp> CHANGELOG: * Support IDE secondary disk without primary disk. Patch by Hiroshi Ito, 5 Apr 2006 diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 41621ba..f37aa07 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -617,10 +617,11 @@ void ide_init (void) if (s) ata_reset_time = 2*simple_strtol(s, NULL, 10); #endif i = 0; - do { + for (;;) { udelay (10000); /* 10 ms */ c = ide_inb (dev, ATA_STATUS); + if (!(c & ATA_STAT_BUSY)) break; i++; #ifdef CONFIG_AMIGAONEG3SE if (i > (ata_reset_time * 100)) { @@ -636,12 +637,12 @@ void ide_init (void) goto skip_bus; } #endif - return; + break; } if ((i >= 100) && ((i%100)==0)) { putc ('.'); } - } while (c & ATA_STAT_BUSY); + } if (c & (ATA_STAT_BUSY | ATA_STAT_FAULT)) { puts ("not available ");

1 0

Re: [DNX#2006040142000964] [U-Boot-Users] WARNING: in ext2fs.c (fwd)
by DENX Support System 05 Apr '06

05 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006040142000964] was entered through the web interface: <snip> > Hello, > > the fix for this bug should be in GIT tree... > > Reinhard > > DENX Support System wrote: > > Hello list, > > > > inside the automatic U-Boot patch tracking system a follow up > > to [DNX#2006040142000964] was entered through the web interface: > > > > <snip> > > > >>------- Forwarded Message > >> > >>Date: Fri, 30 Sep 2005 00:22:57 +0200 > >>From: Reinhard Arlt <reinhard.arlt(a)t-online.de> > >>cc: "'u-boot-users(a)lists.sourceforge.net'" > >><u-boot-users(a)lists.sourceforge > >> .net> > >>Subject: Re: [U-Boot-Users] WARNING: in ext2fs.c > >> > >>Hello, > >> > >>this is a bug on bigendian machines, Who prepares a patch? > >> > >>Best regards > >> > >>Reinhard > >> > >>Roberts, John wrote: > >> > >>> In function: ext2fs_read_file(ext2fs_node_t node, int pos, unsigned > >>>int len, char *buf) > >>> > >>> You may not be getting all the bytes you requested in the 'len' > >>>parameter. Your requested length might be improperly adjusted. > >>> ----------------------- Code snippet ------------- > >>> unsigned int filesize = node->inode.size; > >>> > >>> /* Adjust len so it we can't read past the end of the file. */ > >>> if (len > filesize) { > >>> len = filesize; > >>> } > >>>----------------------------------------------------------- > >>> > >>>"len" is the native requested size, while "filesize" is the files real size, > >>>but byte-swapped and the two are being compared. As long as the byte-swapped > >>>length value is larger than the requested size value, then you'll never have > >>>a problem. > >>> > >>>Now assume the file is 2meg and you requested 2meg. > >>> > >>>IF( len=200000 (2meg) > filesize=2000(2meg byte-swapped) ) > >>>THEN len = filesize > >>> > >>>You end up getting only 2000 bytes. > >>> > >>> The initialization of filesize should be: > >>> unsigned int filesize = __le32_to_cpu (node->inode.size); > >>> Not: > >>> unsigned int filesize = node->inode.size; > >>> > >>> (440gx) > >>> -John Roberts > >>> > >>> > >>> > >>> > >>> > >>>------------------------------------------------------- > >>>This SF.Net email is sponsored by: > >>>Power Architecture Resource Center: Free content, downloads, discussions, > >>>and more. http://solutions.newsforge.com/ibmarch.tmpl > >>>_______________________________________________ > >>>U-Boot-Users mailing list > >>>U-Boot-Users(a)lists.sourceforge.net > >>>https://lists.sourceforge.net/lists/listinfo/u-boot-users > >>> > >> > >> > >> > >>------------------------------------------------------- > >>This SF.Net email is sponsored by: > >>Power Architecture Resource Center: Free content, downloads, > >>discussions, > >>and more. http://solutions.newsforge.com/ibmarch.tmpl > >>_______________________________________________ > >>U-Boot-Users mailing list > >>U-Boot-Users(a)lists.sourceforge.net > >>https://lists.sourceforge.net/lists/listinfo/u-boot-users > >> > >> > >>------- End of Forwarded Message > > > > </snip> > > > > Your U-Boot support team > > </snip> Your U-Boot support team

1 0

[U-Boot-Users] Help: flash driver for CFI complient flash
by s.maiti＠tcs.com 05 Apr '06

05 Apr '06

Hi all, I am using a flash of AMD make (Am29LV160B) in our custom board which is based on mpc8260ads board. This flash is CFI complient. So I want to use the cfi_flash.c as a driver for the flash. Can anyone tell me the procedure ie. what need to be done to use the driver? Please help. Thanks and regards, Souvik Maiti Tata Consultancy Services Limited Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

4 7

[U-Boot-Users] look new
by Darrel Lowy 05 Apr '06

05 Apr '06

V t A G R A . $ 3,35 V A L t U M . $ 1,20 C t A L t S . $ 3,73 And many , many other interesting information Go to the Site <http://tyryw872.imoethadom.com>

1 0

[U-Boot-Users] [PATCH] Common code for detecting new mpc8xx core.
by David Ho 04 Apr '06

04 Apr '06

This refines the routine for detecting new mpc8xx core. This does however add a few bytes to the initial stack usage (Implemented as a function). Signed-off-by: David Ho <davidho(a)nanometrics.ca> --- cpu/mpc8xx/cpu.c | 11 ++++++++++- cpu/mpc8xx/cpu_init.c | 2 +- include/common.h | 3 +++ include/mpc8xx.h | 7 ++++--- 4 files changed, 18 insertions(+), 5 deletions(-) f04a287d9a8f2e26d0b08f69e0f4884c8b382b6b diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c index 4a32986..2098256 100644 --- a/cpu/mpc8xx/cpu.c +++ b/cpu/mpc8xx/cpu.c @@ -357,6 +357,15 @@ int checkcpu (void) return check_CPU (clock, pvr, immr); } +int mpc8xx_new_core (void) +{ + uint partnum = get_immr (PARTNUM_MASK); + + return ((partnum == MPC866_FAMILY_PARTNUM) || + (partnum == MPC885_FAMILY_PARTNUM) + ); +} + /* ------------------------------------------------------------------------- */ /* L1 i-cache */ /* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */ @@ -560,7 +569,7 @@ unsigned long get_tbclk (void) * * For older chips, it's just MF field of PLPRCR plus one. */ - if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */ + if (mpc8xx_new_core()) { /* MPC866/87x/88x series */ factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/ (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S)); } else { diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c index b2c59c6..5cff8a6 100644 --- a/cpu/mpc8xx/cpu_init.c +++ b/cpu/mpc8xx/cpu_init.c @@ -95,7 +95,7 @@ void cpu_init_f (volatile immap_t * immr * For newer (starting MPC866) chips PLPRCR layout is different. */ #ifdef CFG_PLPRCR - if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK) + if (mpc8xx_new_core()) mfmask = PLPRCR_MFACT_MSK; else mfmask = PLPRCR_MF_MSK; diff --git a/include/common.h b/include/common.h index d2570a8..00632e2 100644 --- a/include/common.h +++ b/include/common.h @@ -389,6 +389,9 @@ int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); void reset_cpu (ulong addr); +#if defined(CONFIG_8xx) +int mpc8xx_new_core (void); +#endif /* $(CPU)/serial.c */ int serial_init (void); diff --git a/include/mpc8xx.h b/include/mpc8xx.h index 2911758..2cff376 100644 --- a/include/mpc8xx.h +++ b/include/mpc8xx.h @@ -132,10 +132,11 @@ #define RSR_ALLBITS (RSR_JTRS|RSR_DBSRS|RSR_DBHRS|RSR_CSRS|RSR_SWRS|RSR_LLRS|RSR_ESRS|RSR_EHRS) /*----------------------------------------------------------------------- - * Newer chips (MPC866 family and MPC87x/88x family) have different - * clock distribution system. Their IMMR lower half is >= 0x0800 + * Newer chips (MPC866 family and MPC87x/88x family) */ -#define MPC8xx_NEW_CLK 0x0800 +#define PARTNUM_MASK 0xFF00 +#define MPC866_FAMILY_PARTNUM 0x0800 +#define MPC885_FAMILY_PARTNUM 0x0900 /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 -- 1.2.4.g79f5-dirty

3 2

[U-Boot-Users] CONFIG_SKIP_LOWLEVEL_INIT is broken for at91rm9200dk
by Wang Jian 04 Apr '06

04 Apr '06

Hi, When CONFIG_SKIP_LOWLEVEL_INIT is defined, cpu/arm920t/at91rm9200/lowlevel_init.S is commented out and lowlevel_init() is undefined. But cpu/arm920t/start.S will still use lowlevel_init(). See the code --snip-- #ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit #endif --snip-- but cpu_init_crit() is still defined and use lowlevel_init(). cpu/arm920t/start.o(.text+0xec):/home/lark/arm-u-boot.git/cpu/arm920t/start.S:264: undefined reference to `lowlevel_init' make: *** [u-boot] Error 1 -- lark

5 8

[U-Boot-Users] nand legacy code problem
by Joe Culler 04 Apr '06

04 Apr '06

Hi, I modified u-boot-1.1.4 to booting from NAND flash on s3c2410 and it works fine. After applying my patches to u-boot current source(from git), then it doesn't work :( I added CFG_NAND_LEGACY in include/configs/smdk2410.h and added BOARDLIBS = drivers/nand_legacy/libnand_legacy.a in board/smdk2410/config.mk. Did I miss something else? Thanks. Regards, Joe.

2 1

Re: [DNX#2006040442000057] [U-Boot-Users] [PATCH] Fix itest endianess problem [...]
by DENX Support System 04 Apr '06

04 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040442000057] was created: <snip> > Sorry I didn't Cc: to u-boot-patches(a)denx.de . > > Hello > > Command 'itest' has 2 bugs. > 1. It does not work on big endian machine. > and itest.b may cause unaligned access. > > 2. itest.l does not work on mips CPU. > on mips, > result of (1 << 32) -1 is 0. > (gcc 3.3.4 binutil 2.14.90.0.6 ) > I think, In C language, shifting more than 32bit is undefined. > > Please consider to merge > Patch is attched. > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040442000057] [U-Boot-Users] [PATC [...]
by U-Boot patch tracking system 04 Apr '06

04 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040442000057]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

Re: [DNX#2006040442000048] [U-Boot-Users] [ [...]
by U-Boot patch tracking system 04 Apr '06

04 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040442000048]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

Re: [DNX#2006040442000039] [U-Boot-Users] [PATC [...]
by U-Boot patch tracking system 04 Apr '06

04 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040442000039]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

Re: [DNX#2006040442000048] [U-Boot-Users] [PATCH] Fix return value of ext2loa [...]
by DENX Support System 04 Apr '06

04 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040442000048] was created: <snip> > Sorry I didn't Cc: to u-boot-patches(a)denx.de . > follwing are send to u-boot-users(a)lists.sourceforge.net > -------- > > Sorry, I attached wrong patch. > it should not apply. > > Here is a correct patch. > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 > > From: ito(a)mlb.co.jp > Subject: [U-Boot-Users] [PATCH] Fix return value of ext2load > Date: Tue, 04 Apr 2006 16:05:45 +0900 (JST) > Message-Id: <20060404.160545.59656825.ito(a)mlb.co.jp> > > Hello > > > > I like to do > > > > if ext2load ide 0 80400000 $bootfile; then bootm; fi > > > > but the return value of ext2load is always false. > > > > Please consider to merge. > > Patch is attched. > > -------- > > Hiroshi Ito > > Media Lab. Inc., > > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040442000039] [U-Boot-Users] [PATCH] Fix fsload loads wrong file [...]
by DENX Support System 04 Apr '06

04 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040442000039] was created: <snip> > Sorry I didn't Cc: to u-boot-patches(a)denx.de . > follwing are send to u-boot-users(a)lists.sourceforge.net > > Hello > > Command 'fsload' loads wrong file. > Example > # ls / > ...<snip>... > -rw-r--r-- 764267 uImage > -rw-r--r-- 764267 uImage2 > # fsload uImage2 > will load uImage. > > Please consider to merge. > Patch is attched. > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040442000021] [U-Boot-Users] [PATC [...]
by U-Boot patch tracking system 04 Apr '06

04 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040442000021]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

Re: [DNX#2006040442000021] [U-Boot-Users] [PATCH] Fix return value of reiserl [...]
by DENX Support System 04 Apr '06

04 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040442000021] was created: <snip> > Sorry I didn't Cc: to u-boot-patches(a)denx.de . > follwing are send to u-boot-users(a)lists.sourceforge.net > -------- > > From: ito(a)mlb.co.jp > Subject: [U-Boot-Users] [PATCH] Fix return value of ext2load > > I like to do > > > > if ext2load ide 0 80400000 $bootfile; then bootm; fi > > > > but the return value of ext2load is always false. > > same bug is in reiserload. > and default value of patition no is set to 1. > which value is same as ext2load. > -------- > Hiroshi Ito > Media Lab. Inc., > URL http://www.mlb.co.jp ( Sorry, Japanese only. ) > TEL +81-3-5294-7255 FAX +81-3-5294-7256 </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040442000011] [patch] Bugfix in I2 [...]
by U-Boot patch tracking system 04 Apr '06

04 Apr '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006040442000011]. Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] Re: [DNX#2006040442000011] [patch] Bugfix in I2C initialisation on S3C2400
by DENX Support System 04 Apr '06

04 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040442000011] was created: <snip> > Bugfix in I2C initialisation on S3C2400. > > If the bus is blocked because of a previously interrupted transfer, on > the I2CSCL line up to eleven clocks are generated to complete the > transfer > and to cause the hanging device to free the bus. > > With this fix pin I2CSCL (PG6) is really configured as GPIO and the > clock > pulses are really generated. > > Signed-off-by: Martin Krause <martin.krause(a)tqs.de> > > CHANGELOG: > > * Bugfix in I2C initialisation on S3C2400 > Patch by Martin Krause, 4 Apr 2006 </snip> Your U-Boot support team

1 0

[U-Boot-Users] [PATCH] Fix return value of reiserload
by ito＠mlb.co.jp 04 Apr '06

04 Apr '06

From: ito(a)mlb.co.jp Subject: [U-Boot-Users] [PATCH] Fix return value of ext2load > I like to do > > if ext2load ide 0 80400000 $bootfile; then bootm; fi > > but the return value of ext2load is always false. same bug is in reiserload. and default value of patition no is set to 1. which value is same as ext2load. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 508ffcb..048901f 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -150,7 +150,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int { char *filename = NULL; char *ep; - int dev, part = 0; + int dev, part = 1; ulong addr = 0, part_length, filelen; disk_partition_t info; block_dev_desc_t *dev_desc = NULL; @@ -263,7 +263,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int sprintf(buf, "%lX", filelen); setenv("filesize", buf); - return filelen; + return 0; } U_BOOT_CMD(

1 0

[U-Boot-Users] Patch Submission
by Zachary P. Landau 04 Apr '06

04 Apr '06

> Your mailer is not to blame here. There probably was no useful > reference field at all in these messages as you did not actually send > this message, but rather it was me who bounced the whole batch of > open patches. This is supposed to work better when you send a patch > directly to u-boot-patches(a)denx.de When posting patches to the mailing list, should we CC a copy to u-boot-patches(a)denx.de as well? If so, a mention of this should probably be added to the README. Thanks for setting up this patch system, by the way. It's definitely helpful to get some confirmation that patches were received. -- Zachary P. Landau <kapheine(a)gmail.com>

2 1

[U-Boot-Users] pci 1520-compact flash
by Rangaraju 04 Apr '06

04 Apr '06

Hi , in u-boot1.1.4 am using i82365.c driver which is compatible to PCI1520 to detect compact flash.. it detects PCI1520 & says no card...how it detects what type flash card inserted...any docs for further refering will be helpful.... Kind Regards, Rangaraju. -- View this message in context: http://www.nabble.com/pci-1520-compact-flash-t1390005.html#a3735532 Sent from the Uboot - Users forum at Nabble.com.

2 1

[U-Boot-Users] [PATCH] Fix return value of ext2load
by ito＠mlb.co.jp 04 Apr '06

04 Apr '06

Hello I like to do if ext2load ide 0 80400000 $bootfile; then bootm; fi but the return value of ext2load is always false. Please consider to merge. Patch is attched. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff --git a/fs/ext2/ext2fs.c b/fs/ext2/ext2fs.c index 9cf2fb7..069f8ae 100644 --- a/fs/ext2/ext2fs.c +++ b/fs/ext2/ext2fs.c @@ -769,7 +769,7 @@ int ext2fs_open (char *filename) { int len; if (ext2fs_root == NULL) { - return (-1); + return (0); } ext2fs_file = NULL; status = ext2fs_find_file (filename, &ext2fs_root->diropen, &fdiro, @@ -786,7 +786,7 @@ int ext2fs_open (char *filename) { } len = __le32_to_cpu (fdiro->inode.size); ext2fs_file = fdiro; - return (len); + return (0); fail: ext2fs_free_node (fdiro, &ext2fs_root->diropen);

1 1

[U-Boot-Users] [PATCH] Fix fsload loads wrong file.
by ito＠mlb.co.jp 04 Apr '06

04 Apr '06

Hello Command 'fsload' loads wrong file. Example # ls / ...<snip>... -rw-r--r-- 764267 uImage -rw-r--r-- 764267 uImage2 # fsload uImage2 will load uImage. Please consider to merge. Patch is attched. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff --git a/fs/cramfs/cramfs.c b/fs/cramfs/cramfs.c index 48e7f63..ab5b889 100644 --- a/fs/cramfs/cramfs.c +++ b/fs/cramfs/cramfs.c @@ -97,6 +97,7 @@ static unsigned long cramfs_resolve (uns char *filename) { unsigned long inodeoffset = 0, nextoffset; + int fnamelen=filename?strlen(filename):0; while (inodeoffset < size) { struct cramfs_inode *inode; @@ -125,7 +126,8 @@ static unsigned long cramfs_resolve (uns namelen--; } - if (!strncmp (filename, name, namelen)) { + if (namelen == fnamelen && + !strncmp (filename, name, namelen)) { char *p = strtok (NULL, "/"); if (raw && (p == NULL || *p == '\0'))

1 0

[U-Boot-Users] [PATCH] Fix itest endianess problem
by ito＠mlb.co.jp 04 Apr '06

04 Apr '06

Hello Command 'itest' has 2 bugs. 1. It does not work on big endian machine. and itest.b may cause unaligned access. 2. itest.l does not work on mips CPU. on mips, result of (1 << 32) -1 is 0. (gcc 3.3.4 binutil 2.14.90.0.6 ) I think, In C language, shifting more than 32bit is undefined. Please consider to merge Patch is attched. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256 diff --git a/common/cmd_itest.c b/common/cmd_itest.c index 8ad134f..20dada9 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -70,17 +70,37 @@ extern int cmd_get_data_size(char* arg, static long evalexp(char *s, int w) { - long l, *p; - + long l; + void *p; + switch (w) { + case 1: /* if the parameter starts with a * then assume is a pointer to the value we want */ - if (s[0] == '*') { - p = (long *)simple_strtoul(&s[1], NULL, 16); - l = *p; - } else { - l = simple_strtoul(s, NULL, 16); + if (s[0] == '*') { + p = (void *)simple_strtoul(&s[1], NULL, 16); + l = *(unsigned char*)p; + } else { + l = simple_strtoul(s, NULL, 16) & 0xFF; + } + break; + case 2: + if (s[0] == '*') { + p = (void *)simple_strtoul(&s[1], NULL, 16); + l = *(unsigned short*)p; + } else { + l = simple_strtoul(s, NULL, 16) & 0xFFFF; + } + break; + case 4: + default: + if (s[0] == '*') { + p = (void *)simple_strtoul(&s[1], NULL, 16); + l = *(unsigned int*)p; + } else { + l = simple_strtoul(s, NULL, 16); + } + break; } - - return (l & ((1 << (w * 8)) - 1)); + return l; } static char * evalstr(char *s)

1 0