April 2006 - U-Boot

[U-Boot-Users] MPC83xx: CF in True IDE mode
by Yogi 21 Apr '06

21 Apr '06

Is there support for CF access in true IDE mode for 83xx with Reiser File system ? Thanks Yogi __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[U-Boot-Users] How can a file in directory "u-boot-1.1.4\include\configs" be included?
by 陈敏 21 Apr '06

21 Apr '06

Hello guys I'm a beginner at u-boot porting and have a question about how can a file in directory "u-boot-1.1.4\include\configs", say pxa255_idp.h, be included in the whole project? I just can not find any code line like "#include <pxa255_idp.h>". The question is easy for non-beginners but hard for me. Any advice is appreciated.

4 3

Re: [U-Boot-Users] U-boot on rattler8248 - does not quite run for me
by Wolfgang Denk 21 Apr '06

21 Apr '06

Dear Pete, please keep the mailing list on Cc: In message <CC3927BD446D8240AE6041EA3AB77EDF023515C7(a)ES20SNLNT.srn.sandia.gov> you wrote: > > When I wrote "console" I was referring to the RS232 port on the > Rattler8248 board. > > When the board boots it prints the following text to the RS232 port. > That kind of introductory boot text is sometimes called a "splash > screen". No. With U-Boot, "splash screen" has another meaning; it's something we output on a graphics display (usually LCD). See the docs. > CPU: MPC8248 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz > Board: Rattler Rev. @ > DRAM: 32 MB If the board hangs here, it means that your SDRAM initialization is broken; see the FAQ. > Since the rs232 port is working I am adding puts() calls to the code to > figure out where things are stalling. This is very slow because I have Use a debugger? > to burn the flash every compile-test cycle. I'm still learning to use > the bdi2000 and I don't have WORKSPACE variable set in the [TARGET] > section so flash programming is very slow. Why the heck don't you use the BDI200 for it's main purpose - as a DEBUG tool? > I guess I need to find where the processor gets lost. I could do that > the brute force way by putting puts() calls in the code or I could use > gdb on the relocated code. You provide some instruction on using gdb > after relocation. See the manual. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de "This isn't brain surgery; it's just television." - David Letterman

1 0

[U-Boot-Users] Please pull from 'mpc8349emds' branch of u-boot.git
by Kumar Gala 21 Apr '06

21 Apr '06

Please pull from 'mpc8349emds' branch of git.kernel.org:/pub/scm/linux/kernel/git/galak/u-boot.git to receive the following updates: board/mpc8349ads/Makefile | 45 -- board/mpc8349ads/config.mk | 27 - board/mpc8349ads/mpc8349ads.c | 235 -------------- board/mpc8349ads/u-boot.lds | 122 ------- include/configs/MPC8349ADS.h | 653 ---------------------------------------- CHANGELOG | 9 MAKEALL | 2 Makefile | 3 board/mpc8349emds/Makefile | 10 board/mpc8349emds/mpc8349emds.c | 61 +-- board/mpc8349emds/oftree.dts | 337 ++++++++++++++++++++ board/mpc8349emds/pci.c | 31 + cpu/mpc83xx/cpu.c | 5 cpu/mpc83xx/i2c.c | 2 include/asm-ppc/i2c.h | 2 include/configs/MPC8349EMDS.h | 112 +++--- 16 files changed, 474 insertions(+), 1182 deletions(-) Kumar Gala: Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port: Added flat device tree support to MPC8349EMDS

1 0

[U-Boot-Users] U-boot on rattler8248 - does not quite run for me
by Dudley, Pete A 21 Apr '06

21 Apr '06

Hello I want to deliver a new custom computer board with Das U-boot installed. The board is based on the Freescale MPC8248 and so I am starting with the Rattler8248 eval board from Analogue Micro. I thought it would be a snap to get u-boot running on that board and then I could port it to my custom board. I want to deliver my board with u-boot because that would prove the board works and the customer has not decided whether to run linux, vxworks or no-OS and the flexibility of u-boot would support any approach. So far I have not succeeded in running u-boot on the Rattler8248. I built the u-boot flash image from the 1.1.4 source and burned it into flash with the bdi2000. It starts to print out part of the splash screen and then stops responding to the console. I check the program counter with my bdi2000 and it is running at 0x01fccxxx. Any advice would be greatly appreciated. Here is what comes out on the console. U-Boot 1.1.4 (Apr 18 2006 - 14:38:09) MPC8248 Reset Status: Check Stop, External Soft, External Hard MPC8248 Clock Configuration - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300 - dfbrg 1, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3 - vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000 - pci_clk 33333333 CPU: MPC8248 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz Board: Rattler Rev. @ DRAM: 32 MB ************* pete dudley mailstop 0503 Sandia Labs 1515 Eubank SE Albuquerque, NM 87106 ph: 505.844.5565 fax: 505.844.2925 email: padudle(a)sandia.gov *************************

2 1

[U-Boot-Users] Kernel Boot Problem - u-boot v1.0.1 - OMAP 730 P2 - v2.6.9-rc1-omap1
by Chetan Kapoor 21 Apr '06

21 Apr '06

Hello I am trying to boot kernel version 2.6.9-rc1-omap1 on my OMAP P2 730 target board, but am facing problems in the kernel boot process. I am using u-boot version 1.0.1, which has been burnt to the target's NOR flash. u-boot 1.0.1 is up and running on the target, and I use the command 'loadb 0x(addr)' along with triggering a send file (protocol->kermit) on the hyperterminal to download the kernel image 'uImage' on to the target's RAM. 'uImage' is created using a utility 'mkimage' which is created by u-boot build process. I specified the load address & entry point as 0x10008000 while creating the uImage. I also made sure that I properly specify the environment variables for u-boot, the most important one being 'bootargs'. The following command was given at the u-boot prompt to specify 'bootargs'. OMAP730 P2 # setenv bootargs mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10400000,1M devfs=mount The ramdisk image was then downloaded to the target's RAM over the serial line at the 'initrd' address - 0x10400000. Having done everything by the book, I now issue the following command to boot the kernel: OMAP730 P2 # bootm 0x10008000 0x10400000 The traces received on the hyperterminal are: ## Booting image at 10008000 ... Image Name: Linux-2.6.9-rc1-omap1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 864600 Bytes = 844.3 kB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... OK XIP Kernel Image ... OK Starting kernel ... -----> and the execution stucks beyond this point. The system freezes right after u-boot finishes uncompressing the image for startup. Nothing is output after that & there are no responses to any input from the terminal. I am not very sure if there is any missing step which is needed to make the kernel boot or maybe I am giving the load-address/entry-point wrongly while building the kernel images. Also, I tried changing the filed textaddr-y in the kernel makefile while building the kernel zImage. Does any one have any idea that what does this address signify & does it effect the kernel images created by the build process. The original entry against the textaddr-y field in the kernel Makefile was 0xC0008000 which was changed to 0x10008000 by me as the former address looked a bit obscure & did not relate to the target's memory map. Please help me if anyone has faced the similar problem before or if anyone can make out the missing link in the steps which I am doing in order to boot the kernel image. Your reply & suggestion will be of great help. Chetan *********************** FSS-Unclassified ***********************

2 1

[U-Boot-Users] TQM866M CPU glitch
by Nicholas Mc Guire 21 Apr '06

21 Apr '06

Hi ! I have a TQM866M board here, and it seems that the ID that this board is using is not checked for in cpu/mpc8xx/cpu.c - not sure if this patch is usable - but it fixes the problem of indentifying the right CPU for me diff -rbNu u-boot-1.1.4/cpu/mpc8xx/cpu.c u-boot-1.1.4.hofrat/cpu/mpc8xx/cpu.c --- u-boot-1.1.4/cpu/mpc8xx/cpu.c 2006-04-19 15:17:20.000000000 +0200 +++ u-boot-1.1.4.hofrat/cpu/mpc8xx/cpu.c 2006-04-19 15:00:37.000000000 +0200 @@ -108,6 +108,15 @@ "PC866x"; /* Unknown chip from MPC866 family */ # endif break; + case 0x08010004: pre = 'M'; suf = ""; m = 1; + if (id_str == NULL) + id_str = +# if defined(CONFIG_MPC866P) + "PC866P"; +# else + "PC866x"; /* Unknown chip from MPC866 family */ +# endif + break; case 0x09000000: pre = 'M'; mid = suf = ""; m = 1; if (id_str == NULL) id_str = "PC885"; /* 870/875/880/885 */ diff -rbNu u-boot-1.1.4/include/configs/TQM866M.h u-boot-1.1.4.hofrat/include/configs/TQM866M.h --- u-boot-1.1.4/include/configs/TQM866M.h 2006-04-19 15:58:51.000000000 +0200 +++ u-boot-1.1.4.hofrat/include/configs/TQM866M.h 2006-04-19 15:59:04.000000000 +0200 @@ -34,6 +34,7 @@ */ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ +#define CONFIG_MPC866P 1 /* This is a MPC866P CPU */ #define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ A different issue is that I can't get the ehternet to work, the error on network access is: ... TX not ready TX timeout ... Any known issues with ehtnernet on TQM866 ? could not find anything in the list except for SRAM issues (that seem not to exist any way) - any hint would be appreciated. thx! hofrat -- Nicholas Mc Guire University of Lanzhou Distributed & Embedded System Lab http://dslab.lzu.edu.cn School of Information Science and Engeneering mcguire(a)lzu.edu.cn Tianshui South Road 222. Lanzhou 730000 .P.R.China Tel:+86-931-8912025 Fax:+86-931-8912022 Lichtensteinstr. 31, Mistelbach A-2130 Austria Tel:+43-2572-201082 Fax:+43-2572-201084

2 1

[U-Boot-Users] Problem updating u-boot
by Chetan Kapoor 21 Apr '06

21 Apr '06

Hello I am facing a problem with u-boot update on my OMAP P2 730 target. Are there any build-time configruation options for u-boot build related to the target's NAND or NOR flash. In other words, do we need to specify any build-time configuration options if we intend to burn the resulting u-boot binary to NAND or NOR flash. I have U-boot 1.0.1 burnt to OMAP 730 P2 NOR flash. I am now trying to update u-boot using the method: - Download u-boot.bin (new version) to target's RAM using serial line - Copy u-boot.bin to target's flash using u-boot command 'cp.b' The u-boot version I am running presently is vendor supplied (version 1.0.1) and I want to update it with the one I have built (version 1.1.1) for my target hardware. I tried downloading the u-boot.bin to the P2 730 RAM over serial line to a specific address and triggered the binary's entry point using command: go 'start address' The new u-boot binary seems to execute as it comes up with normal u-boot start-up messages, but stops and hangs at a point. Please have a look at the traces of execution: OMAP730 P2 # loadb 11080000 ## Ready for binary (kermit) download to 0x11080000 at 115200 bps... ## Total Size = 0x0001ca68 = 117352 Bytes ## Start Addr = 0x11080000 OMAP730 P2 # go 11080000 ## Starting application at 0x11080000 ... U-Boot 1.1.1 (Apr 19 2006 - 15:50:59) U-Boot code: 11080000 -> 1109CA68 BSS: -> 110A134C RAM Configuration: Bank #0: 10000000 32 MB Flash: 0 kB NAND: ---------> The execution hangs at this point I am not very sure what is expected by u-boot binary at his point. The above binary is result of a custom build done by me. The u-boot sources were downloaded from http://linux.omap.com and the build time configuration was done using 'make omap730p2_config'. Do I need to take care of any other build-time options/configurations? Kindly help if you have any ideas/answers. Your suggestion on how to update u-boot are also welcome. Thanks Chetan *********************** FSS-Unclassified ***********************

2 1

[U-Boot-Users] Conflicts in u-boot with different toolchains
by Kanagesh R 19 Apr '06

19 Apr '06

Hello, I work with an OMAP5912 OSK. I am trying to build u-boot 1.1.4 for the board but hitting some problems, while building and with the built binary. I am using the ELDK toolchain that I have downloaded from www.denx.de, have installed both versions ELDK 3.1.1 (GCC-3.3.3 and GLIBC-2.3.1) and ELDK 4.0 (GCC-4.0.0 and GLIBC-2.3.5). I am able to build u-boot-1.1.4. However the binary built using ELDK 4.0 toolchain doesn't boot the board. The same sources, when 'distcleaned' and built again using the ELDK 3.1.1 toolchain generates a binary that boots the OSK board. I have made some changes in the u-boot-1.1.4 source code: For the OMAP5912 OSK the flash drivers are not available. I need to configure CFI to provide the drivers for me. As a quick work around, I picked up the OSK flash drivers from u-boot-1.1.2 and added them for supporting flash on the OSK. With the u-boot binary generated by the ELDK 3.1.1 toolchain, I can boot the board and the flash driver has also been tested. I have erased the flash, and written a JFFS2 filesystem to it. I am also able to boot out of the JFFS2 fileysystem. Has anyone seen problems building u-boot-1.1.4 with ELDK 4.0 toolchain? Further, with the ELDK 4.0 toolchain, I seem to be hitting more basic problems. for example, when I compile packages inetutils (this provides the network utilities like ftp, telnet servers and clients) it gives compilation error on some statements where there is type-casting. However, when the same inetutils sources are cleaned and built using the ELDK-3.1.1 toolchain, it builds without any issues. This seems more like a GCC-4.0.X issue as I've tested this same scenario with a crosstools toolchain (GCC-4.0.2) and have the same problems. Thanks in advance, Regards, Kanagesh -- India.com free e-mail - www.india.com. Check out our value-added Premium features, such as an extra 20MB for mail storage, POP3, e-mail forwarding, and ads-free mailboxes!

1 0

[U-Boot-Users] CRC32
by Terence Soh 19 Apr '06

19 Apr '06

Hi, Is there any utility in the tools directory that will help to calculate the crc32 checksum for u-boot? I would like to run a crc32() on u-boot at bootup and compare with the checksum value to check the integrity. Thanks in advance, Terence.

2 2

[U-Boot-Users] 85xx flat-dev tree patches
by Andy Fleming 18 Apr '06

18 Apr '06

What's the status of the 85xx flat device tree patches? Both the ones from Jon Loeliger, and those I sent?

1 0

RE: [U-Boot-Users] u-boot 834x spd_ram
by Aziz Mzili 18 Apr '06

18 Apr '06

Ok thank you That's what i thought it should be -----Original Message----- From: Dan Malek [mailto:dan@embeddededge.com] Sent: Tuesday, April 18, 2006 11:45 AM To: Kumar Gala Cc: Aziz Mzili; u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] u-boot 834x spd_ram On Apr 18, 2006, at 9:51 AM, Kumar Gala wrote: > I'm not aware of any. I'm just guessing the boards people have > were built this way. I have a board that doesn't use CS2/CS3. Once I get it running well I'll submit the patches. Basically, I created a #define in the board configuration header file that indicates the base chip select used. I then use this base and base+1 in the code in place of the hard coded assumption of CS2/3 in the spd_sdram.c file. -- Dan

1 0

RE: [U-Boot-Users] u-boot 834x spd_ram
by Aziz Mzili 18 Apr '06

18 Apr '06

When is mentioned "cs" i meant the DDR bank cs bounds. In cpu/mpc83xx/spd_ram.c. They are hardcoded to be 2 and 3. Shouldn't this come from the config ? cpu/mpc83xx/spd_ram.c should be a common code for any 83xx based board not only the freescale board which have the DDR module in the back of the board. cheers -----Original Message----- From: u-boot-users-admin(a)lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Ben Warren Sent: Tuesday, April 18, 2006 10:08 AM To: Jerry Van Baren Cc: u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] u-boot 834x spd_ram Jerry, The 83xx chips have a separate memory bus for DDR, with its own chip selects. For these chips, you do in fact need to use the local bus CS0 for your boot flash/EEPROM. I can't find anything in the manual that differentiates between the DDR chip selects, so using CS2/3 was probably just a design choice. regards, Ben On Tue, 2006-04-18 at 10:02 -0400, Jerry Van Baren wrote: Aziz Mzili wrote: > > Hi > > I'm wondering why in cpu/83xx/spd_ram.c we expect the DDR ram to be on > cs2 and cs3. Is there any issue with it on cs0 and cs1 ? > > thank you > > Aziz Mzili I'm not a 834x expert, but all my experience is that CS0 is used to boot the processor. If it is DDR RAM rather than flash, someone other than the 834x must initialize the DDR RAM and load it with the boot program. That is possible, but very uncommon. gvb ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642> &kid=110944&bid=241720&dat=121642 _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

1 0

[U-Boot-Users] u-boot 834x spd_ram
by Aziz Mzili 18 Apr '06

18 Apr '06

Hi I'm wondering why in cpu/83xx/spd_ram.c we expect the DDR ram to be on cs2 and cs3. Is there any issue with it on cs0 and cs1 ? thank you Aziz Mzili

6 5

[U-Boot-Users] can not co from cvs
by wh one23 17 Apr '06

17 Apr '06

cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/u-boot login Logging in to :pserver:anonymous@cvs.sourceforge.net:2401/cvsroot/u-boot CVS password: cvs [login aborted]: end of file from server (consult above messages if any)

3 2

[U-Boot-Users] MII PHY driver for MPC8541's FCC
by Stephen Cheng 17 Apr '06

17 Apr '06

Hello, all my friends, I am working on porting U-boot to an MPC8541 board. MPC8541 has 2 TSEC and 2 FCC, an issue is that it only has a single SMI master controller. This SMI interface is introduced and illustrated in TSEC chapter of MPC8541 reference manual, while in FCC chapter it is recommended that using GPIO to implement the SMI feature. In our design, we connect both PHY chips (88E1111s and LXT973) to this single SMI interface, we have discussed and believe that this will work. I know if we use GPIO for FCC to connect with LXT973, I can use bit-bang mii driver(define CONFIG_BITBANGMII), however, I cannot find code in U-boot to implement our current scheme. Mii driver routines in tsec.c seems only designed for TSEC device. Do I need to write a mii_phy driver for such a scheme? Thanks for your attention, Best Regards, Stephen Cheng

1 0

[U-Boot-Users] help req to choose h/w platform
by U Boot 16 Apr '06

16 Apr '06

Hi, I need to design some board whhich have the following capabilites. The board will be used in automobile. Tere will be one/two LCD. The user will be able to play, streaming audio, video, brows net etc The user will be able to store file, movies etc. IR remote/keyboard will be there Is there any board which have the similar functionality supported. Please help me to choose the right h/w platform from where I can start. Thanks

1 0

[U-Boot-Users] [PATCH] Support for Samsung SMDK2440 board
by Ilya Yanok 14 Apr '06

14 Apr '06

Added Support for Samsung SMDK2440 board Here is a patch against u-boot 1.1.4

1 0

Fw: [U-Boot-Users] [PATCH] Fix for configuration has both dataflash and parallel flash
by Wang Jian 14 Apr '06

14 Apr '06

Hi Denk, You really need to look at this patch. Forwarded by Wang Jian <lark(a)linux.net.cn> ----------------------- Original Message ----------------------- From: Wang Jian <lark(a)linux.net.cn> To: u-boot-users(a)lists.sourceforge.net Date: Mon, 03 Apr 2006 15:22:31 +0800 Subject: [U-Boot-Users] [PATCH] Fix for configuration has both dataflash and parallel flash ---- Hi, When the board has both dataflash and parallel flash, using 'cp' command will write to parallel flash and then fail. The patch below fixes the problem. BTW, I think "addr" is typo of "dest" in the dataflash test, so the patch may be as simple as s/addr/dest/ in dataflash test. I am in a hurry, so let suitable person to decide. diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 0f4f9b7..a01c2a5 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -423,6 +423,7 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int fl /* check if we are copying to Flash */ if ( (addr2info(dest) != NULL) #ifdef CONFIG_HAS_DATAFLASH + && (!addr_dataflash(dest)) && (!addr_dataflash(addr)) #endif ) { -- lark ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users --------------------- Original Message Ends --------------------

1 0

[U-Boot-Users] How to saveenv in SPI DataFlash?
by Andrew Zhukov 14 Apr '06

14 Apr '06

Hello everybody, My target is at91rm9200dk with SPI DataFlash only (no Flash). I'd like to store environment vars in this SPI DataFlash. For Flash and Nand there are corresponding modules: common/env_flash.c|env_nand.c. But for Dataflash there is nothing... Should I create the module to store environment in at91rm9200dk SPI DataFlash? Best regards Andrew Zhukov

2 1

RE: [U-Boot-Users] U-Boot on 440EP Bamboo board, anybody succeed?
by Andriy Korud 14 Apr '06

14 Apr '06

> > You have to set the MAC addresse(s) and reset the board. > After this both enet devices will be available. Thanks, it helps. > > In PIBS works. 2. When trying to boot uImage (loaded via > USB, as eth > > doesn't work), it just hang after "Uncompressing Kernel > Image ... OK". > > The same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled > > with gcc 3.4.5. > > Please give the DENX linux images a try: > > ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/ > U-Boot 1.1.4 (Dec 5 2005 - 16:21:22) (binary image downloaded from above URL) No success, hangs afret "Uncompressing Kernel Image ... OK" Regards, Andriy Korud

3 3

RE: [U-Boot-Users] TFTP server for uboot
by Howard, Marc 13 Apr '06

13 Apr '06

Solarwinds has a free TFTP server that runs on windoze. http://www.solarwindsuk.net/solar-winds-engineers-free-tools.htm Marc > -----Original Message----- > From: u-boot-users-admin(a)lists.sourceforge.net > [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf > Of Antonio Di Bacco > Sent: Thursday, April 13, 2006 1:09 PM > To: u-boot-users(a)lists.sourceforge.net > Subject: [U-Boot-Users] TFTP server for uboot > > Anyone knows if a tftp server is available for u-boot? > > Bye, > Antonio. > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking > scripting language > that extends applications into web and mobile media. Attend > the live webcast > and join the prime developer group breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720& dat=121642 > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users >

1 0

[U-Boot-Users] TFTP server for uboot
by Antonio Di Bacco 13 Apr '06

13 Apr '06

Anyone knows if a tftp server is available for u-boot? Bye, Antonio.

1 0

RE: [U-Boot-Users] SATA disk support in u-boot
by Rune Torgersen 13 Apr '06

13 Apr '06

I will have to get a SII3124 up pertty soon. >From what I can tell, the SATA command table seems to pretty much line up register wise to the ATA comand registers, so it seems to mee that it should be possible to use the ATA driver with some minimal local controller setup. > -----Original Message----- > From: u-boot-users-admin(a)lists.sourceforge.net > [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf > Of jack zhao > Sent: Wednesday, April 12, 2006 04:16 > To: u-boot-users(a)lists.sourceforge.net > Subject: [U-Boot-Users] SATA disk support in u-boot > > Hi, > > Could someone tell me if U-boot supports SATA disk? > How to support? The current SATA chip I am using is sil3114. > > > > Best Wishes > > Jack Zhao > > USI SH R&D Center 86-021-58966996-1122 > > > > > >

1 0

RE: [U-Boot-Users] questions regarding entry point
by Burch, John T. 13 Apr '06

13 Apr '06

> Right, all of this should be taken care of in the kernel Makefile; > see existing examples. Eventually look at the DENX trees which do > this on PPC, ARM and MIPS. > I can't find any reference to uImage in... 2.6.15 Makefile http://www.denx.de/cgi-bin/cvsweb/linux-mips/Makefile. http://www.denx.de/cgi-bin/cvsweb/linux-2.4/Makefile I'm clearly missing something. Where can I see an example of uImage implemented as a target of a linux Makefile? ============================================================ The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any reproduction, dissemination or distribution of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Tellabs ============================================================

2 1