October 2006 - U-Boot

[U-Boot-Users] [PATCH] Cleaned up unused and conditionally used local variables.
by Jon Loeliger 27 Oct '06

27 Oct '06

Signed-off-by: Jon Loeliger <jdl(a)freescale.com> --- cpu/mpc86xx/spd_sdram.c | 8 ++------ 1 files changed, 2 insertions(+), 6 deletions(-) diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index 97bbf43..b18e822 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -195,7 +195,6 @@ #endif unsigned int tCKmin_ps, tCKmax_ps; unsigned int max_data_rate; unsigned int busfreq; - unsigned sdram_cfg_1; unsigned int memsize; unsigned char caslat, caslat_ctrl; unsigned int trfc, trfc_clk, trfc_low, trfc_high; @@ -209,10 +208,7 @@ #endif unsigned char cpo; unsigned char burst_len; unsigned int mode_caslat; - unsigned char sdram_type; unsigned char d_init; - unsigned int law_size; - volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; unsigned int tCycle_ps, modfreq; if (ddr_num == 1) @@ -1107,12 +1103,12 @@ spd_sdram(void) unsigned int law_size_ddr1; unsigned int law_size_ddr2; volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1; - volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2; volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; #ifdef CONFIG_DDR_INTERLEAVE unsigned int law_size_interleaved; + volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1; + volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2; memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1, 1, 1, -- 1.4.2.1.gc5d7

2 1

Re: [U-Boot-Users] [DNX#2006102742000029] [PATCH] Cleaned up unused and conditionally used l [...]
by DENX Support System 27 Oct '06

27 Oct '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006102742000029] was created: <snip> > > Signed-off-by: Jon Loeliger <jdl(a)freescale.com> > --- > cpu/mpc86xx/spd_sdram.c | 8 ++------ > 1 files changed, 2 insertions(+), 6 deletions(-) > > diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c > index 97bbf43..b18e822 100644 > --- a/cpu/mpc86xx/spd_sdram.c > +++ b/cpu/mpc86xx/spd_sdram.c > @@ -195,7 +195,6 @@ #endif > unsigned int tCKmin_ps, tCKmax_ps; > unsigned int max_data_rate; > unsigned int busfreq; > - unsigned sdram_cfg_1; > unsigned int memsize; > unsigned char caslat, caslat_ctrl; > unsigned int trfc, trfc_clk, trfc_low, trfc_high; > @@ -209,10 +208,7 @@ #endif > unsigned char cpo; > unsigned char burst_len; > unsigned int mode_caslat; > - unsigned char sdram_type; > unsigned char d_init; > - unsigned int law_size; > - volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; > unsigned int tCycle_ps, modfreq; > > if (ddr_num == 1) > @@ -1107,12 +1103,12 @@ spd_sdram(void) > unsigned int law_size_ddr1; > unsigned int law_size_ddr2; > volatile immap_t *immap = (immap_t *)CFG_IMMR; > - volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1; > - volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2; > volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; > > #ifdef CONFIG_DDR_INTERLEAVE > unsigned int law_size_interleaved; > + volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1; > + volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2; > > memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1, > 1, 1, > -- > 1.4.2.1.gc5d7 </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006102742000029] [PATCH] Cleaned up unused and conditionally used local varia [...]
by U-Boot patch tracking system 27 Oct '06

27 Oct '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006102742000029]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] Bad Data CRC
by Chandru 27 Oct '06

27 Oct '06

Hi all, I am using u-boot 1.1.3 developed for a custom board which uses INCA Processor(MIPS 4K Core). The root file system is jffs2. Everything goes OK for the first time. My board is coming up and the application is also running. But problem occurs when I download any file through TFTP on to the board 3 or 4 times. I getting the following error, Hit any key to stop autoboot: 0 ### JFFS2 loading '/boot/uImage' to 0x80400000 Scanning JFFS2 FS: .... done. ### JFFS2 load complete: 750401 bytes loaded to 0x80400000 ## Booting image at 80400000 ... Image Name: MIPS Linux-2.4.31-INCAIP-4.3 Created: 2006-09-29 11:39:24 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 750337 Bytes = 732.8 kB Load Address: 80002000 Entry Point: 8019e040 Verifying Checksum ... Bad Data CRC Got 8a273880 but wanted 64b50ae5 It happens only after doing TFTP several times. Any advice and suggestions are welcome. Best regards, Chandru.

1 0

[U-Boot-Users] Adding code for new flash type to u-boot 1.1.4
by Bob 27 Oct '06

27 Oct '06

Hi, I am new to u-boot. I would like to know what are the things needed to be done( source code added), to add a new flash type to u-boot. Any kind of help, documentation etc is helpful. Thank you very much in advance. regards, James -- Bob chindiyan(a)fastmail.fm -- http://www.fastmail.fm - IMAP accessible web-mail

2 2

Re: [U-Boot-Users] [DNX#2006102742000011] [PATCH] Added ETHPRIME to default_environment
by DENX Support System 27 Oct '06

27 Oct '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006102742000011] was created: <snip> > Second try - as attachment this time. > > This patch adds the ETHPRIME option to the default_environment list. > Its absence prevented CONFIG_ETHPRIME from working on a newly > flashed board. The lists in 'common/env_common.c' and > 'common/environment.c' are now synchronized. > > Signed-off-by: Ben Warren <bwarren(a)qstreams.com> </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006102742000011] [PATCH] Added ETHPRIME to default_environment
by U-Boot patch tracking system 27 Oct '06

27 Oct '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006102742000011]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [PATCH] Added ETHPRIME to default_environment
by Ben Warren 27 Oct '06

27 Oct '06

This patch adds the ETHPRIME option to the default_environment list. It not being there prevented CONFIG_ETHPRIME from working on a newly flashed board. The lists in 'common/env_common.c' and 'common/environment.c' are now synchronized. Signed-off-by: Ben Warren <bwarren(a)qstreams.com> --- common/env_common.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-) diff --git a/common/env_common.c b/common/env_common.c index eb33422..5f91851 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -99,6 +99,9 @@ #endif #ifdef CONFIG_ETH3ADDR "eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0" #endif +#ifdef CONFIG_ETHPRIME + "ethprime=" CONFIG_ETHPRIME "\0" +#endif #ifdef CONFIG_IPADDR "ipaddr=" MK_STR(CONFIG_IPADDR) "\0" #endif @@ -108,9 +111,6 @@ #endif #ifdef CFG_AUTOLOAD "autoload=" CFG_AUTOLOAD "\0" #endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif #ifdef CONFIG_ROOTPATH "rootpath=" MK_STR(CONFIG_ROOTPATH) "\0" #endif @@ -129,6 +129,9 @@ #endif #ifdef CONFIG_LOADADDR "loadaddr=" MK_STR(CONFIG_LOADADDR) "\0" #endif +#ifdef CONFIG_PREBOOT + "preboot=" CONFIG_PREBOOT "\0" +#endif #ifdef CONFIG_CLOCKS_IN_MHZ "clocks_in_mhz=1\0" #endif -- 1.4.1

2 2

Re: [U-Boot-Users] [DNX#2006102642000031] [PATCH] Added ETHPRIME to default_e [...]
by DENX Support System 26 Oct '06

26 Oct '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006102642000031] was created: <snip> > Dear Ben, > > in message <1161893396.23153.4.camel(a)saruman.qstreams.net> you wrote: > > This patch adds the ETHPRIME option to the default_environment list. It > > not being there prevented CONFIG_ETHPRIME from working on a newly > > flashed board. The lists in 'common/env_common.c' and > > 'common/environment.c' are now synchronized. > > > > Signed-off-by: Ben Warren <bwarren(a)qstreams.com> > > --- > > common/env_common.c | 9 ++++++--- > > 1 files changed, 6 insertions(+), 3 deletions(-) > > > > diff --git a/common/env_common.c b/common/env_common.c > > index eb33422..5f91851 100644 > > --- a/common/env_common.c > > +++ b/common/env_common.c > > @@ -99,6 +99,9 @@ #endif > > #ifdef CONFIG_ETH3ADDR > > "eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0" > > #endif > > +#ifdef CONFIG_ETHPRIME > > + "ethprime=" CONFIG_ETHPRIME "\0" > > +#endif > ... > > Sorry, but this patch has been corrupted by your mailer. > > Please resubmit after making sure your mailer doesn';t do such > reformatting. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > I think animal testing is a terrible idea; they get all nervous and > give the wrong answers. </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006102642000031] [PATCH] Added ETHPRIME to default_environment [...]
by U-Boot patch tracking system 26 Oct '06

26 Oct '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006102642000031]. Please keep this ticket ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0