January 2006 - U-Boot

[U-Boot-Users] U boot modification...
by Kiran Jammula 23 May '12

23 May '12

Hi, I am using U boot for my project. I need to configure the console while booting by prompting the user from target board LCD and Keypad. So please let me know which file of the U-boot I have to modify to achieve this. Kiran _________________________________________________________________ Special offer for NRIs! http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm Get a zero balance account for next 20 years. From Citibank

4 5

[U-Boot-Users] Ethernet loopback command
by Thomas Schäfer 17 Apr '12

17 Apr '12

Hi, The patch attached provides a command called 'ethloop' which allows to perform loopback testing on the current eth device. To achieve this, a new ethernet packet type (PROT_TEST, 0x0808, AFAIK this is not used otherwise) is introduced in net/net.c. The patch is against SF CVS from 20050307. The functions EthLoopStart, EthLoopSend and EthLoopHandler generate a simple ethernet frame with NetOurEther as destination address and packet type PROT_TEST. The looped back package is compared with the original one and a message is displayed. It is necessary to set the ethernet line into loopback mode either by programming the PHY or using a loopback plug. I've tested this on our PPC405 custom board, but it should also work on all other systems because packet generation is independent of the underlying ethernet hardware. Example usage: => mii w 0 0 7100 <-- sets PHY into loopback mode => ethloop Using ppc_405x_eth0 device Got ethernet loopback frame, len=64 loopback test successfully completed => mii w 0 0 8000 <-- PHY reset after test is completed Maybe this is also useful for others.. Best regards, Thomas Schäfer ____________________________________ Kontron Modular Computers GmbH Konrad-Zuse-Str. 9 66115 Saarbrücken Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: thomas.schaefer(a)kontron.com

5 5

[U-Boot-Users] Add a new command to U-Boot
by Carlos Filipe Silva 20 May '09

20 May '09

Hi all! I have one doubt. How can I add a new command to U-Boot? Do I have to use only the macro U_BOOT_CMD() like files .../common/cmd_* or do I have to do more things, like defines, etc.? And after this is compliled with no error, if I type help in U-Boot's shell, do I see this command like the others? Best regards, Carlos Silva

11 24

[U-Boot-Users] how to support usbtty
by zhuzhenhua 31 Aug '08

31 Aug '08

becides set CONFIG_USB_TTY, what other modification need to do for the usbtty support? thanks for any hints

5 10

[U-Boot-Users] u-boot for MPC8548
by Rupesh S 07 Jun '07

07 Jun '07

Hi Does u-boot support any evaluation boards based on the MPC8548 processor ? Thanks in advance -- Rupesh S

2 1

[U-Boot-Users] Sequence of Xilinx ML403/PPC
by S. Egbert 28 Dec '06

28 Dec '06

Awesome... Got U-boot 1.1.4 working on a Xilinx ML403 (PPC 405) evaluation board with our custom core. Next for this planning stage, I'm trying to juggle 'leap-frogging' memory mapping between the first-loader (Xilinx SREC bootloader in firmware), second loader (U-boot 1.1.4) and Linux 2.4 OS. Firstly, we started with Xilinx's SREC (bootloader.c) bootloader (I know, I know, SREC is space consuming) and plan to replace this first bootloader with an ELF or pseudo-binary version later after everything-else is checked out. Planning-wise, I envisioned that such a bring-up memory overlaying sequence would be something like this: 1. Xilinx bootloader.c reads SREC from 16-bit flash and decode/verify/copies to lowest RAM (0000_0000). Then transfers control to 0000_0100. 2. U-boot starts up and relocate itself to MONITOR region which is in the highest RAM region of 01F0_0000. 3. U-boot Scripting occurs which copies Linux OS from flash into where? Next highest or lowest portion of RAM? Is it dependent on whether dual-stage vmlinux.initrd or single-stage vmlinux is used or not? At power-up, with U-Boot 1.1.4 being unusually low-RAM-based before starting up (instead of executing straight out of ROM), I noticed that despite being relocated to MONITOR (higher RAM) region, the PIT exception vector appears to be active in 0000_10c0-ish. Despite this RAM-to-RAM relocation, this "mtest" clobbering of the 0000_10C0 region caused Machine Exception error whenever I attempt to perform memory test over this supposedly former exception vector region. I thought that the objective during U-boot relocation was to ensure a completely discontinued RAM region (formerly occupied by U-boot ROM-based session). A hard and easy questions to the esteemed and avid readers of u-boot-users mailing list... 1. Where do I go from there with regard to the 0000_1000 (PIT_EXCEPTION). Isn't the PIT specific to Motorola 8xx-series (this here is a PPC 405). What exception did the lib_ppc/start.S/trap_init() exactly skipped? Skipped an exception mentioned vaguely in this source code vaguely. Do I need to tweak the trap_init() some more to relocate these untransfered exception vectors into the high MONITOR region? 2. And lastly, do I go high or low for Linux OS? Thank you, S. Egbert

7 13

[U-Boot-Users] mtdparts
by Ladislav Michl 29 Oct '06

29 Oct '06

Hi there. I'm just trying to sync with U-Boot development and found a little regresion in new mtdparts code. Previously I was using custom partition function, which let me do precisely what I wanted. mtd0 - U-Boot mtd1 - env mtd2 - r_env mtd3 - rootfs0 mtd4 - rootfs1 ... etc In above scheme my custom part function allowed only chpart [34], so it was not even possible to change partition to evn sector for example. Moreover it was pretty easy to construct kernel command line this way: setenv bootargs '$bootargs root=/dev/mtdblock$partition ro rootfstype=jffs2' And everything worked nicely. That is no longer case and it's real pain with both NOR and NAND devices used in system. Prefered solution for me is to fix kernel to be able to mount root filesystem from MTD device given by name (root=mtd:rootfs0) unless someone has better idea :-). Something which would work also with 2.4 kernels would be appreciated. ladis

6 14

[U-Boot-Users] ssi.h file missing - UBoot1.1.2 on p4
by p.karthik＠purplevisiontech.com 18 Aug '06

18 Aug '06

Hi, I tried to compile UBoot -1.1.2 on Pentium4 with linuxKernel 2.4.21-4.EL. But it gives the error mg says that "ssi.h: No such file or directory". Please help me to solve this problem. # make distclean ......... # make sc520_cdp_config ......... #make ......... error msg: ------------- a - vsprintf.o a - zlib.o make[1]: Leaving directory `/home/karthik/i386-uboot/src/u-boot-1.1.2/lib_generic' make -C `dirname board/sc520_spunk/libsc520_spunk.a` make[1]: Entering directory `/home/karthik/i386-uboot/src/u-boot-1.1.2/board/sc520_spunk' gcc -M -g -Os -D__KERNEL__ -DTEXT_BASE=0x387c0000 -I/home/karthik/i386-uboot/src/u-boot-1.1.2/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/include -pipe -DCONFIG_I386 -D__I386__ -march=i386 -Werror sc520_spunk_asm.S sc520_spunk_asm16.S sc520_spunk.c flash.c > .depend sc520_spunk.c:27:17: ssi.h: No such file or directory make[1]: *** [.depend] Error 1 make[1]: Leaving directory `/home/karthik/i386-uboot/src/u-boot-1.1.2/board/sc520_spunk' make: *** [board/sc520_spunk/libsc520_spunk.a] Error 2

3 2

[U-Boot-Users] [PATCH] common.h spelling fix
by Cory T. Tusar 18 Aug '06

18 Aug '06

Attached is a patch fixing a minor spelling goof in common.h. Picky, picky, I know... Patch was generated against a 2005.11.29 CVS pull. CHANGELOG: * Patch by Cory Tusar, 30 Nov 2005: Fixed common.h spelling error. -Cory -- Cory T. Tusar Embedded Systems Engineer Videon Central, Inc. 2171 Sandy Drive State College, PA 16801 (814) 235-1111 x316 (814) 235-1118 fax "Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." --Brian W. Kernighan

2 1

[U-Boot-Users] [PATCH] trivial typo fix
by Andreas Engel 18 Aug '06

18 Aug '06

this is not worth mentioning anywhere... Regards, Andreas Engel

2 1

[U-Boot-Users] [PATCH] add-support-for-ps2-keyboard-on-tqm8540-board.patch
by Martin Krause 18 Aug '06

18 Aug '06

Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 07 Nov 2005 This is tested on a STK85XX baseboard. Make sure the PS/2 controller is programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 07 Nov 2005

3 3

Re: [U-Boot-Users] Bug in StrataFlash drivers
by llandre 18 Aug '06

18 Aug '06

>>>Do you have a spoecific test case that shows the presence of the bug? >> >>I experience the problem when trying to store in Flash my ramdisk image >>that is 1502693 bytes. > > > This will probably also happen with smaller size? Yes, I think it will happen with any odd-sized files. >>>And can you please provide a proper patch, with CHANGELOG entry, >>>Signed-off-by line and everything? See attached file. ChangeLog: * Patch by Andrea Marson, 11 November 2005: Fixed odd-sized images writing in Zefeer StrataFlash driver. Signed-off-by: Andrea Marson <r&d2(a)dave-tech.it> Best regards, llandre DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&d2(a)dave-tech.it diff --git a/board/dave/ZefeerEVB/flashmem.c b/board/dave/ZefeerEVB/flashmem.c --- a/board/dave/ZefeerEVB/flashmem.c +++ b/board/dave/ZefeerEVB/flashmem.c @@ -810,12 +810,14 @@ static int flash_write_cfibuffer(flash_i "write to buffer")) == ERR_OK) { switch(info->portwidth) { case FLASH_CFI_8BIT: cnt = len; break; - case FLASH_CFI_16BIT: + case FLASH_CFI_16BIT: cnt = len >> 1; + if (len % 2) + cnt += 1; break; case FLASH_CFI_32BIT: cnt = len >> 2; break; default:

2 1

[U-Boot-Users] Fix 32bits compilation error in dm9000.c
by Eric BENARD / Free 18 Aug '06

18 Aug '06

Hi, the attached patch fix a compilation error in dm9000.c when configured in 32 bits mode. Eric

2 1

[U-Boot-Users] New NAND code
by Stefan Roese 10 Aug '06

10 Aug '06

Hi! I was just wondering about state of the NAND code. When I remember correctly a pretty big rewrite was done but not commited yet. Is the last patch sent to this list from Pantelis Antoniou on 5th May still the latest version? Best regards, Stefan

6 8

[U-Boot-Users] [PATCH] HEAD cmd_falsh.c for m68k tool chain
by Jens Scharsig 31 Jul '06

31 Jul '06

CHANGELOG entry: * Patch by Jens Scharsig, 28 July 2005 - fix some compiler/parser error, if using m68k tool chain - optical fix for protect on/off all messages, if using more then one bank Best regards, Jens Scharsig Index: common/cmd_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/cmd_flash.c,v retrieving revision 1.13 diff -p -u -r1.13 cmd_flash.c --- common/cmd_flash.c 15 Jul 2005 22:47:24 -0000 1.13 +++ common/cmd_flash.c 28 Jul 2005 12:32:00 -0000 @@ -117,11 +117,15 @@ static int addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) { char *ep; + char len_used; /* indicates if the "start +length" form used */ + char found; + ulong bank; + *addr_first = simple_strtoul(arg1, &ep, 16); if (ep == arg1 || *ep != '\0') - return -1; - - char len_used = 0; /* indicates if the "start +length" form used */ + return -1; + + len_used = 0; /* indicates if the "start +length" form used */ if (arg2 && *arg2 == '+'){ len_used = 1; ++arg2; @@ -146,8 +150,7 @@ addr_spec(char *arg1, char *arg2, ulong */ /* find the end addr of the sector where the *addr_last is */ - char found = 0; - ulong bank; + found = 0; for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){ int i; flash_info_t *info = &flash_info[bank]; @@ -453,12 +456,10 @@ int do_protect (cmd_tbl_t *cmdtp, int fl info->protect[i] = p; #endif /* CFG_FLASH_PROTECTION */ } - } - #if defined(CFG_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); + if (!rcode) puts (" done\n"); #endif /* CFG_FLASH_PROTECTION */ - + } return rcode; }

2 2

[U-Boot-Users] MIPS: AMD Alchemy au1x00 ethernet problems
by geoff cleary 23 Jul '06

23 Jul '06

Hi I am seeing a problem with network support on the AMD dbau1550 eval board (and our own board based on Au1550). It seems that after one network command, no further packets can be sent. The minimal case that shows the problem is to include the ping command. The first ping will succeed; any other network commands time out. I have successfully loaded large files using tftpboot command and confirmed the image loaded correctly. Trying the command again fails with TX timeout. Has anyone seen this problem or have any suggestions as to what is going on? We are building little endian. I have tried Joseph Chiu's buffer 0 patch. Thanks Geoff __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

4 3

[U-Boot-Users] [PATCH] Update MTD NAND to Linux-2.6.14
by Ladislav Michl 22 Jul '06

22 Jul '06

Generated against testing-NAND branch. Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> CHANGELOG: * Update NAND code to be based on what is in Linux-2.6.14 Patch by Ladislav Michl, 3 Nov 2005 diff -Naurw a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h --- a/include/linux/mtd/nand.h 2005-11-03 12:48:27.000000000 +0100 +++ b/include/linux/mtd/nand.h 2005-11-03 12:49:41.000000000 +0100 @@ -5,7 +5,7 @@ * Steven J. Hill <sjhill(a)realitydiluted.com> * Thomas Gleixner <tglx(a)linutronix.de> * - * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $ + * $Id: nand.h,v 1.73 2005/05/31 19:39:17 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -48,12 +48,15 @@ * 02-08-2004 tglx added option field to nand structure for chip anomalities * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id * update of nand_chip structure description + * 01-17-2005 dmarlin added extended commands for AG-AND device and added option + * for BBT_AUTO_REFRESH. + * 01-20-2005 dmarlin added optional pointer to hardware specific callback for + * extra error status checks. */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H #include <linux/mtd/compat.h> -#include <linux/mtd/mtd.h> struct mtd_info; /* Scan and identify a NAND device */ @@ -113,6 +116,25 @@ #define NAND_CMD_READSTART 0x30 #define NAND_CMD_CACHEDPROG 0x15 +/* Extended commands for AG-AND device */ +/* + * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but + * there is no way to distinguish that from NAND_CMD_READ0 + * until the remaining sequence of commands has been completed + * so add a high order bit and mask it off in the command. + */ +#define NAND_CMD_DEPLETE1 0x100 +#define NAND_CMD_DEPLETE2 0x38 +#define NAND_CMD_STATUS_MULTI 0x71 +#define NAND_CMD_STATUS_ERROR 0x72 +/* multi-bank error status (banks 0-3) */ +#define NAND_CMD_STATUS_ERROR0 0x73 +#define NAND_CMD_STATUS_ERROR1 0x74 +#define NAND_CMD_STATUS_ERROR2 0x75 +#define NAND_CMD_STATUS_ERROR3 0x76 +#define NAND_CMD_STATUS_RESET 0x7f +#define NAND_CMD_STATUS_CLEAR 0xff + /* Status bits */ #define NAND_STATUS_FAIL 0x01 #define NAND_STATUS_FAIL_N1 0x02 @@ -149,6 +171,10 @@ /* Enable Hardware ECC before syndrom is read back from flash */ #define NAND_ECC_READSYN 2 +/* Bit mask for flags passed to do_nand_read_ecc */ +#define NAND_GET_DEVICE 0x80 + + /* Option constants for bizarre disfunctionality and real * features */ @@ -168,6 +194,10 @@ /* Chip has a array of 4 pages which can be read without * additional ready /busy waits */ #define NAND_4PAGE_ARRAY 0x00000040 +/* Chip requires that BBT is periodically rewritten to prevent + * bits from adjacent blocks from 'leaking' in altering data. + * This happens with the Renesas AG-AND chips, possibly others. */ +#define BBT_AUTO_REFRESH 0x00000080 /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -190,7 +220,8 @@ * This can only work if we have the ecc bytes directly behind the * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ #define NAND_HWECC_SYNDROME 0x00020000 - +/* This option skips the bbt scan during initialization. */ +#define NAND_SKIP_BBTSCAN 0x00040000 /* Options set by nand scan */ /* Nand scan has allocated oob_buf */ @@ -215,15 +246,18 @@ /* Keep gcc happy */ struct nand_chip; -#if 0 /** * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices * @lock: protection lock * @active: the mtd device which holds the controller currently + * @wq: wait queue to sleep on if a NAND operation is in progress + * used instead of the per chip wait queue when a hw controller is available */ +#if 0 struct nand_hw_control { spinlock_t lock; struct nand_chip *active; + wait_queue_head_t wq; }; #endif @@ -283,6 +317,8 @@ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices * @priv: [OPTIONAL] pointer to private chip date + * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks + * (determine if errors are correctable) */ struct nand_chip { @@ -338,8 +374,9 @@ struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; struct nand_bbt_descr *badblock_pattern; - struct nand_hw_control *controller; +/* struct nand_hw_control *controller; */ void *priv; + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); }; /* @@ -351,6 +388,7 @@ #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_HYNIX 0xad /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -461,6 +499,9 @@ extern int nand_default_bbt (struct mtd_info *mtd); extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); +extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, u_char * oob_buf, + struct nand_oobinfo *oobsel, int flags); /* * Constants for oob configuration diff -Naurw drivers/nand/diskonchip.c drivers/nand.orig/diskonchip.c --- a/drivers/nand/diskonchip.c 2005-11-03 12:42:45.000000000 +0100 +++ b/drivers/nand/diskonchip.c 2005-11-03 10:04:07.000000000 +0100 @@ -16,7 +16,7 @@ * * Interface to generic NAND code for M-Systems DiskOnChip devices * - * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $ + * $Id: diskonchip.c,v 1.54 2005/04/07 14:22:55 dbrown Exp $ */ #include <linux/kernel.h> @@ -35,13 +35,13 @@ #include <linux/mtd/inftl.h> /* Where to look for the devices? */ -#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS -#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0 +#ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS +#define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0 #endif static unsigned long __initdata doc_locations[] = { #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) -#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH +#ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, @@ -81,11 +81,6 @@ struct mtd_info *nextdoc; }; -/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL - MediaHeader. The spec says to just keep going, I think, but that's just - silly. */ -#define MAX_MEDIAHEADER_SCAN 8 - /* This is the syndrome computed by the HW ecc generator upon reading an empty page, one with all 0xff for data and stored ecc code. */ static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a }; @@ -111,10 +106,11 @@ static int no_ecc_failures=0; module_param(no_ecc_failures, int, 0); -#ifdef CONFIG_MTD_PARTITIONS static int no_autopart=0; module_param(no_autopart, int, 0); -#endif + +static int show_firmware_partition=0; +module_param(show_firmware_partition, int, 0); #ifdef MTD_NAND_DISKONCHIP_BBTWRITE static int inftl_bbt_write=1; @@ -123,7 +119,7 @@ #endif module_param(inftl_bbt_write, int, 0); -static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS; +static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS; module_param(doc_config_location, ulong, 0); MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); @@ -411,6 +407,11 @@ this->write_byte(mtd, 0); doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + /* We cant' use dev_ready here, but at least we wait for the + * command to complete + */ + udelay(50); + ret = this->read_byte(mtd) << 8; ret |= this->read_byte(mtd); @@ -429,6 +430,8 @@ doc2000_write_byte(mtd, 0); doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + udelay(50); + ident.dword = readl(docptr + DoC_2k_CDSN_IO); if (((ident.byte[0] << 8) | ident.byte[1]) == ret) { printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n"); @@ -492,11 +495,11 @@ struct doc_priv *doc = this->priv; void __iomem *docptr = doc->virtadr; - /*ReadDOC(docptr, CDSNSlowIO); */ + //ReadDOC(docptr, CDSNSlowIO); /* 11.4.5 -- delay twice to allow extended length cycle */ DoC_Delay(doc, 2); ReadDOC(docptr, ReadPipeInit); - /*return ReadDOC(docptr, Mil_CDSN_IO); */ + //return ReadDOC(docptr, Mil_CDSN_IO); return ReadDOC(docptr, LastDataRead); } @@ -1044,13 +1047,23 @@ return ret; } -/*u_char mydatabuf[528]; */ +//u_char mydatabuf[528]; +/* The strange out-of-order .oobfree list below is a (possibly unneeded) + * attempt to retain compatibility. It used to read: + * .oobfree = { {8, 8} } + * Since that leaves two bytes unusable, it was changed. But the following + * scheme might affect existing jffs2 installs by moving the cleanmarker: + * .oobfree = { {6, 10} } + * jffs2 seems to handle the above gracefully, but the current scheme seems + * safer. The only problem with it is that any code that parses oobfree must + * be able to handle out-of-order segments. + */ static struct nand_oobinfo doc200x_oobinfo = { .useecc = MTD_NANDECC_AUTOPLACE, .eccbytes = 6, .eccpos = {0, 1, 2, 3, 4, 5}, - .oobfree = { {8, 8} } + .oobfree = { {8, 8}, {6, 2} } }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. @@ -1064,12 +1077,11 @@ { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift); + unsigned offs; int ret; size_t retlen; - end = min(end, mtd->size); /* paranoia */ - for (offs = 0; offs < end; offs += mtd->erasesize) { + for (offs = 0; offs < mtd->size; offs += mtd->erasesize) { ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); if (retlen != mtd->oobblock) continue; if (ret) { @@ -1111,6 +1123,7 @@ u_char *buf; struct NFTLMediaHeader *mh; const unsigned psize = 1 << this->page_shift; + int numparts = 0; unsigned blocks, maxblocks; int offs, numheaders; @@ -1122,8 +1135,10 @@ if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out; mh = (struct NFTLMediaHeader *) buf; -/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ -/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ + mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); + mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); + mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" " FirstPhysicalEUN = %d\n" @@ -1132,7 +1147,6 @@ mh->DataOrgID, mh->NumEraseUnits, mh->FirstPhysicalEUN, mh->FormattedSize, mh->UnitSizeFactor); -/*#endif */ blocks = mtd->size >> this->phys_erase_shift; maxblocks = min(32768U, mtd->erasesize - psize); @@ -1175,23 +1189,28 @@ offs <<= this->page_shift; offs += mtd->erasesize; - /*parts[0].name = " DiskOnChip Boot / Media Header partition"; */ - /*parts[0].offset = 0; */ - /*parts[0].size = offs; */ - - parts[0].name = " DiskOnChip BDTL partition"; - parts[0].offset = offs; - parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; + if (show_firmware_partition == 1) { + parts[0].name = " DiskOnChip Firmware / Media Header partition"; + parts[0].offset = 0; + parts[0].size = offs; + numparts = 1; + } + + parts[numparts].name = " DiskOnChip BDTL partition"; + parts[numparts].offset = offs; + parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; + + offs += parts[numparts].size; + numparts++; - offs += parts[0].size; if (offs < mtd->size) { - parts[1].name = " DiskOnChip Remainder partition"; - parts[1].offset = offs; - parts[1].size = mtd->size - offs; - ret = 2; - goto out; + parts[numparts].name = " DiskOnChip Remainder partition"; + parts[numparts].offset = offs; + parts[numparts].size = mtd->size - offs; + numparts++; } - ret = 1; + + ret = numparts; out: kfree(buf); return ret; @@ -1233,8 +1252,6 @@ mh->FormatFlags = le32_to_cpu(mh->FormatFlags); mh->PercentUsed = le32_to_cpu(mh->PercentUsed); -/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ -/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" " NoOfBinaryPartitions = %d\n" @@ -1252,7 +1269,6 @@ ((unsigned char *) &mh->OsakVersion)[2] & 0xf, ((unsigned char *) &mh->OsakVersion)[3] & 0xf, mh->PercentUsed); -/*#endif */ vshift = this->phys_erase_shift + mh->BlockMultiplierBits; @@ -1278,8 +1294,6 @@ ip->spareUnits = le32_to_cpu(ip->spareUnits); ip->Reserved0 = le32_to_cpu(ip->Reserved0); -/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */ -/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */ printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" " firstUnit = %d\n" @@ -1289,16 +1303,14 @@ i, ip->virtualUnits, ip->firstUnit, ip->lastUnit, ip->flags, ip->spareUnits); -/*#endif */ -/* - if ((i == 0) && (ip->firstUnit > 0)) { + if ((show_firmware_partition == 1) && + (i == 0) && (ip->firstUnit > 0)) { parts[0].name = " DiskOnChip IPL / Media Header partition"; parts[0].offset = 0; parts[0].size = mtd->erasesize * ip->firstUnit; numparts = 1; } -*/ if (ip->flags & INFTL_BINARY) parts[numparts].name = " DiskOnChip BDK partition"; @@ -1614,11 +1626,11 @@ if (ChipID == DOC_ChipID_DocMilPlus16) { WriteDOC(~newval, virtadr, Mplus_AliasResolution); oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); - WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */ + WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it } else { WriteDOC(~newval, virtadr, AliasResolution); oldval = ReadDOC(doc->virtadr, AliasResolution); - WriteDOC(newval, virtadr, AliasResolution); /* restore it */ + WriteDOC(newval, virtadr, AliasResolution); // restore it } newval = ~newval; if (oldval == newval) { diff -Naurw drivers/nand/nand_base.c drivers/nand.orig/nand_base.c --- a/drivers/nand/nand_base.c 2005-11-03 12:42:45.000000000 +0100 +++ b/drivers/nand/nand_base.c 2005-11-03 10:43:21.000000000 +0100 @@ -28,6 +28,24 @@ * among multiple independend devices. Suggestions and initial patch * from Ben Dooks <ben-mtd(a)fluff.org> * + * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue. + * Basically, any block not rewritten may lose data when surrounding blocks + * are rewritten many times. JFFS2 ensures this doesn't happen for blocks + * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they + * do not lose data, force them to be rewritten when some of the surrounding + * blocks are erased. Rather than tracking a specific nearby block (which + * could itself go bad), use a page address 'mask' to select several blocks + * in the same area, and rewrite the BBT when any of them are erased. + * + * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas + * AG-AND chips. If there was a sudden loss of power during an erase operation, + * a "device recovery" operation must be performed when power is restored + * to ensure correct operation. + * + * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to + * perform extra error status checks on erase and write failures. This required + * adding a wrapper function for nand_read_ecc. + * * Credits: * David Woodhouse for adding multichip support * @@ -41,7 +59,7 @@ * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. * - * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $ + * $Id: nand_base.c,v 1.147 2005/07/15 07:18:06 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -176,18 +194,22 @@ /* De-select the NAND device */ this->select_chip(mtd, -1); - /* Do we have a hardware controller ? */ + if (this->controller) { + /* Release the controller and the chip */ spin_lock(&this->controller->lock); this->controller->active = NULL; + this->state = FL_READY; + wake_up(&this->controller->wq); spin_unlock(&this->controller->lock); - } + } else { /* Release the chip */ spin_lock (&this->chip_lock); this->state = FL_READY; wake_up (&this->wq); spin_unlock (&this->chip_lock); } +} #else static void nand_release_device (struct mtd_info *mtd) { @@ -477,6 +499,7 @@ /* Get block number */ block = ((int) ofs) >> this->bbt_erase_shift; + if (this->bbt) this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ @@ -500,7 +523,7 @@ struct nand_chip *this = mtd->priv; /* Check the WP bit */ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); - return (this->read_byte(mtd) & 0x80) ? 0 : 1; + return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; } /** @@ -524,6 +547,39 @@ return nand_isbad_bbt (mtd, ofs, allowbbt); } +/* + * Wait for the ready pin, after a command + * The timeout is catched later. + */ +/* XXX U-BOOT XXX */ +#if 0 +static void nand_wait_ready(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + unsigned long timeo = jiffies + 2; + + /* wait until command is processed or timeout occures */ + do { + if (this->dev_ready(mtd)) + return; + touch_softlockup_watchdog(); + } while (time_before(jiffies, timeo)); +} +#else +static void nand_wait_ready(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + + reset_timer_masked(); + + /* wait until command is processed or timeout occures */ + do { + if (this->dev_ready(mtd)) + return; + } while (get_timer_masked() < CFG_HZ * 1); +} +#endif + /** * nand_command - [DEFAULT] Send command to NAND device * @mtd: MTD device structure @@ -605,7 +661,7 @@ this->hwcontrol(mtd, NAND_CTL_SETCLE); this->write_byte(mtd, NAND_CMD_STATUS); this->hwcontrol(mtd, NAND_CTL_CLRCLE); - while ( !(this->read_byte(mtd) & 0x40)); + while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); return; /* This applies to read commands */ @@ -619,12 +675,11 @@ return; } } - /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ ndelay (100); - /* wait until command is processed */ - while (!this->dev_ready(mtd)); + + nand_wait_ready(mtd); } /** @@ -653,7 +708,7 @@ /* Begin command latch cycle */ this->hwcontrol(mtd, NAND_CTL_SETCLE); /* Write out the command to the device. */ - this->write_byte(mtd, command); + this->write_byte(mtd, (command & 0xff)); /* End command latch cycle */ this->hwcontrol(mtd, NAND_CTL_CLRCLE); @@ -681,7 +736,7 @@ /* * program and erase have their own busy handlers - * status and sequential in needs no delay + * status, sequential in, and deplete1 need no delay */ switch (command) { @@ -691,8 +746,19 @@ case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_STATUS: + case NAND_CMD_DEPLETE1: return; + /* + * read error status commands require only a short delay + */ + case NAND_CMD_STATUS_ERROR: + case NAND_CMD_STATUS_ERROR0: + case NAND_CMD_STATUS_ERROR1: + case NAND_CMD_STATUS_ERROR2: + case NAND_CMD_STATUS_ERROR3: + udelay(this->chip_delay); + return; case NAND_CMD_RESET: if (this->dev_ready) @@ -701,7 +767,7 @@ this->hwcontrol(mtd, NAND_CTL_SETCLE); this->write_byte(mtd, NAND_CMD_STATUS); this->hwcontrol(mtd, NAND_CTL_CLRCLE); - while ( !(this->read_byte(mtd) & 0x40)); + while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); return; case NAND_CMD_READ0: @@ -728,8 +794,8 @@ /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ ndelay (100); - /* wait until command is processed */ - while (!this->dev_ready(mtd)); + + nand_wait_ready(mtd); } /** @@ -744,37 +810,34 @@ #if 0 static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) { - struct nand_chip *active = this; - + struct nand_chip *active; + spinlock_t *lock; + wait_queue_head_t *wq; DECLARE_WAITQUEUE (wait, current); - /* - * Grab the lock and see if the device is available - */ + lock = (this->controller) ? &this->controller->lock : &this->chip_lock; + wq = (this->controller) ? &this->controller->wq : &this->wq; retry: + active = this; + spin_lock(lock); + /* Hardware controller shared among independend devices */ if (this->controller) { - spin_lock (&this->controller->lock); if (this->controller->active) active = this->controller->active; else this->controller->active = this; - spin_unlock (&this->controller->lock); } - - if (active == this) { - spin_lock (&this->chip_lock); - if (this->state == FL_READY) { + if (active == this && this->state == FL_READY) { this->state = new_state; - spin_unlock (&this->chip_lock); + spin_unlock(lock); return; } - } set_current_state (TASK_UNINTERRUPTIBLE); - add_wait_queue (&active->wq, &wait); - spin_unlock (&active->chip_lock); + add_wait_queue(wq, &wait); + spin_unlock(lock); schedule (); - remove_wait_queue (&active->wq, &wait); + remove_wait_queue(wq, &wait); goto retry; } #else @@ -825,7 +888,7 @@ if (this->read_byte(mtd) & NAND_STATUS_READY) break; } - yield (); + cond_resched(); } status = (int) this->read_byte(mtd); return status; @@ -946,15 +1009,21 @@ if (!cached) { /* call wait ready function */ status = this->waitfunc (mtd, this, FL_WRITING); + + /* See if operation failed and additional status checks are available */ + if ((status & NAND_STATUS_FAIL) && (this->errstat)) { + status = this->errstat(mtd, this, FL_WRITING, status, page); + } + /* See if device thinks it succeeded */ - if (status & 0x01) { + if (status & NAND_STATUS_FAIL) { DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); return -EIO; } } else { /* FIXME: Implement cached programming ! */ /* wait until cache is ready*/ - /* status = this->waitfunc (mtd, this, FL_CACHEDRPG); */ + // status = this->waitfunc (mtd, this, FL_CACHEDRPG); } return 0; } @@ -1050,7 +1119,7 @@ if (!this->dev_ready) udelay (this->chip_delay); else - while (!this->dev_ready(mtd)); + nand_wait_ready(mtd); /* All done, return happy */ if (!numpages) @@ -1072,23 +1141,24 @@ #endif /** - * nand_read - [MTD Interface] MTD compability function for nand_read_ecc + * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read * @retlen: pointer to variable to store the number of read bytes * @buf: the databuffer to put data * - * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL + * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL + * and flags = 0xff */ static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) { - return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL); + return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff); } /** - * nand_read_ecc - [MTD Interface] Read data with ECC + * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read @@ -1097,11 +1167,39 @@ * @oob_buf: filesystem supplied oob data buffer * @oobsel: oob selection structure * - * NAND read with ECC + * This function simply calls nand_do_read_ecc with flags = 0xff */ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) { + /* use userspace supplied oobinfo, if zero */ + if (oobsel == NULL) + oobsel = &mtd->oobinfo; + return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); +} + + +/** + * nand_do_read_ecc - [MTD Interface] Read data with ECC + * @mtd: MTD device structure + * @from: offset to read from + * @len: number of bytes to read + * @retlen: pointer to variable to store the number of read bytes + * @buf: the databuffer to put data + * @oob_buf: filesystem supplied oob data buffer (can be NULL) + * @oobsel: oob selection structure + * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed + * and how many corrected error bits are acceptable: + * bits 0..7 - number of tolerable errors + * bit 8 - 0 == do not get/release chip, 1 == get/release chip + * + * NAND read with ECC + */ +int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, u_char * oob_buf, + struct nand_oobinfo *oobsel, int flags) +{ + int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; struct nand_chip *this = mtd->priv; @@ -1126,12 +1224,9 @@ } /* Grab the lock and see if the device is available */ + if (flags & NAND_GET_DEVICE) nand_get_device (this, mtd ,FL_READING); - /* use userspace supplied oobinfo, if zero */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - /* Autoplace of oob data ? Use the default placement scheme */ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) oobsel = this->autooob; @@ -1208,10 +1303,10 @@ printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n"); lastwhinge = jiffies; } + this->read_buf(mtd, data_poi, end); #else puts("Reading data from NAND FLASH without ECC is not recommended\n"); #endif - this->read_buf(mtd, data_poi, end); break; } @@ -1236,7 +1331,8 @@ /* We calc error correction directly, it checks the hw * generator for an error, reads back the syndrome and * does the error correction on the fly */ - if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) { + ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]); + if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); ecc_failed++; @@ -1275,7 +1371,7 @@ p[i] = ecc_status; } - if (ecc_status == -1) { + if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); ecc_failed++; } @@ -1289,13 +1385,12 @@ case MTD_NANDECC_AUTOPLACE: case MTD_NANDECC_AUTOPL_USR: /* Walk through the autoplace chunks */ - for (i = 0, j = 0; j < mtd->oobavail; i++) { + for (i = 0; oobsel->oobfree[i][1]; i++) { int from = oobsel->oobfree[i][0]; int num = oobsel->oobfree[i][1]; memcpy(&oob_buf[oob], &oob_data[from], num); - j+= num; + oob += num; } - oob += mtd->oobavail; break; case MTD_NANDECC_PLACE: /* YAFFS1 legacy mode */ @@ -1321,7 +1416,7 @@ if (!this->dev_ready) udelay (this->chip_delay); else - while (!this->dev_ready(mtd)); + nand_wait_ready(mtd); if (read == len) break; @@ -1346,6 +1441,7 @@ } /* Deselect and wake up anyone waiting on the device */ + if (flags & NAND_GET_DEVICE) nand_release_device(mtd); /* @@ -1411,16 +1507,6 @@ this->read_buf(mtd, &buf[i], thislen); i += thislen; - /* Apply delay or wait for ready/busy pin - * Do this before the AUTOINCR check, so no problems - * arise if a chip which does auto increment - * is marked as NOAUTOINCR by the board driver. - */ - if (!this->dev_ready) - udelay (this->chip_delay); - else - while (!this->dev_ready(mtd)); - /* Read more ? */ if (i < len) { page++; @@ -1433,6 +1519,16 @@ this->select_chip(mtd, chipnr); } + /* Apply delay or wait for ready/busy pin + * Do this before the AUTOINCR check, so no problems + * arise if a chip which does auto increment + * is marked as NOAUTOINCR by the board driver. + */ + if (!this->dev_ready) + udelay (this->chip_delay); + else + nand_wait_ready(mtd); + /* Check, if the chip supports auto page increment * or if we have hit a block boundary. */ @@ -1499,7 +1595,7 @@ if (!this->dev_ready) udelay (this->chip_delay); else - while (!this->dev_ready(mtd)); + nand_wait_ready(mtd); /* Check, if the chip supports auto page increment */ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) @@ -1817,7 +1913,7 @@ status = this->waitfunc (mtd, this, FL_WRITING); /* See if device thinks it succeeded */ - if (status & 0x01) { + if (status & NAND_STATUS_FAIL) { DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); ret = -EIO; goto out; @@ -2075,6 +2171,7 @@ return nand_erase_nand (mtd, instr, 0); } +#define BBT_PAGE_MASK 0xffffff3f /** * nand_erase_intern - [NAND Interface] erase block(s) * @mtd: MTD device structure @@ -2087,6 +2184,10 @@ { int page, len, status, pages_per_block, ret, chipnr; struct nand_chip *this = mtd->priv; + int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */ + unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */ + /* It is used to see if the current page is in the same */ + /* 256 block group and the same bank as the bbt. */ DEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); @@ -2132,6 +2233,13 @@ goto erase_exit; } + /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */ + if (this->options & BBT_AUTO_REFRESH) { + bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; + } else { + bbt_masked_page = 0xffffffff; /* should not match anything */ + } + /* Loop through the pages */ len = instr->len; @@ -2154,14 +2262,27 @@ status = this->waitfunc (mtd, this, FL_ERASING); + /* See if operation failed and additional status checks are available */ + if ((status & NAND_STATUS_FAIL) && (this->errstat)) { + status = this->errstat(mtd, this, FL_ERASING, status, page); + } + /* See if block erase succeeded */ - if (status & 0x01) { + if (status & NAND_STATUS_FAIL) { DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; instr->fail_addr = (page << this->page_shift); goto erase_exit; } + /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */ + if (this->options & BBT_AUTO_REFRESH) { + if (((page & BBT_PAGE_MASK) == bbt_masked_page) && + (page != this->bbt_td->pages[chipnr])) { + rewrite_bbt[chipnr] = (page << this->page_shift); + } + } + /* Increment page address and decrement length */ len -= (1 << this->phys_erase_shift); page += pages_per_block; @@ -2171,6 +2292,13 @@ chipnr++; this->select_chip(mtd, -1); this->select_chip(mtd, chipnr); + + /* if BBT requires refresh and BBT-PERCHIP, + * set the BBT page mask to see if this BBT should be rewritten */ + if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) { + bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; + } + } } instr->state = MTD_ERASE_DONE; @@ -2185,6 +2313,18 @@ /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); + /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */ + if ((this->options & BBT_AUTO_REFRESH) && (!ret)) { + for (chipnr = 0; chipnr < this->numchips; chipnr++) { + if (rewrite_bbt[chipnr]) { + /* update the BBT for chip */ + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", + chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]); + nand_update_bbt (mtd, rewrite_bbt[chipnr]); + } + } + } + /* Return more or less happy */ return ret; } @@ -2256,7 +2396,7 @@ */ int nand_scan (struct mtd_info *mtd, int maxchips) { - int i, j, nand_maf_id, nand_dev_id, busw; + int i, nand_maf_id, nand_dev_id, busw, maf_id; struct nand_chip *this = mtd->priv; /* Get buswidth to select the correct functions*/ @@ -2344,12 +2484,18 @@ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; } + /* Try to identify manufacturer */ + for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) { + if (nand_manuf_ids[maf_id].id == nand_maf_id) + break; + } + /* Check, if buswidth is correct. Hardware drivers should set * this correct ! */ if (busw != (this->options & NAND_BUSWIDTH_16)) { printk (KERN_INFO "NAND device: Manufacturer ID:" " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, - nand_manuf_ids[i].name , mtd->name); + nand_manuf_ids[maf_id].name , mtd->name); printk (KERN_WARNING "NAND bus width %d instead %d bit\n", (this->options & NAND_BUSWIDTH_16) ? 16 : 8, @@ -2388,14 +2534,9 @@ if (mtd->oobblock > 512 && this->cmdfunc == nand_command) this->cmdfunc = nand_command_lp; - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == nand_maf_id) - break; - } printk (KERN_INFO "NAND device: Manufacturer ID:" " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, - nand_manuf_ids[j].name , nand_flash_ids[i].name); + nand_manuf_ids[maf_id].name , nand_flash_ids[i].name); break; } @@ -2470,18 +2611,15 @@ default: printk (KERN_WARNING "No oob scheme defined for oobsize %d\n", mtd->oobsize); -/* BUG(); */ + BUG(); } } /* The number of bytes available for the filesystem to place fs dependend * oob data */ - if (this->options & NAND_BUSWIDTH_16) { - mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2); - if (this->autooob->eccbytes & 0x01) - mtd->oobavail--; - } else - mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1); + mtd->oobavail = 0; + for (i = 0; this->autooob->oobfree[i][1]; i++) + mtd->oobavail += this->autooob->oobfree[i][1]; /* * check ECC mode, default to software @@ -2530,7 +2668,7 @@ default: printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); -/* BUG(); */ + BUG(); } /* Check hardware ecc function availability and adjust number of ecc bytes per @@ -2548,7 +2686,7 @@ if (this->calculate_ecc && this->correct_data && this->enable_hwecc) break; printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n"); -/* BUG(); */ + BUG(); } mtd->eccsize = this->eccsize; @@ -2623,14 +2761,21 @@ #if 0 mtd->owner = THIS_MODULE; #endif + /* Check, if we should skip the bad block table scan */ + if (this->options & NAND_SKIP_BBTSCAN) + return 0; + /* Build bad block table */ return this->scan_bbt (mtd); } + /** * nand_release - [NAND Interface] Free resources held by the NAND device * @mtd: MTD device structure */ +/* XXX U-BOOT XXX */ +#if 0 void nand_release (struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; @@ -2640,10 +2785,8 @@ del_mtd_partitions (mtd); #endif /* Deregister the device */ -/* XXX U-BOOT XXX */ -#if 0 del_mtd_device (mtd); -#endif + /* Free bad block table memory, if allocated */ if (this->bbt) kfree (this->bbt); @@ -2655,4 +2798,12 @@ kfree (this->data_buf); } +EXPORT_SYMBOL_GPL (nand_scan); +EXPORT_SYMBOL_GPL (nand_release); + +MODULE_LICENSE ("GPL"); +MODULE_AUTHOR ("Steven J. Hill <sjhill(a)realitydiluted.com>, Thomas Gleixner <tglx(a)linutronix.de>"); +MODULE_DESCRIPTION ("Generic NAND flash driver code"); #endif + +#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ diff -Naurw drivers/nand/nand_bbt.c drivers/nand.orig/nand_bbt.c --- a/drivers/nand/nand_bbt.c 2005-11-03 12:42:45.000000000 +0100 +++ b/drivers/nand/nand_bbt.c 2005-11-03 10:27:04.000000000 +0100 @@ -6,7 +6,7 @@ * * Copyright (C) 2004 Thomas Gleixner (tglx(a)linutronix.de) * - * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $ + * $Id: nand_bbt.c,v 1.35 2005/07/15 13:53:47 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -78,7 +78,7 @@ */ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) { - int i, end; + int i, end = 0; uint8_t *p = buf; end = paglen + td->offs; @@ -96,9 +96,9 @@ return -1; } + if (td->options & NAND_BBT_SCANEMPTY) { p += td->len; end += td->len; - if (td->options & NAND_BBT_SCANEMPTY) { for (i = end; i < len; i++) { if (*p++ != 0xff) return -1; @@ -108,6 +108,29 @@ } /** + * check_short_pattern - [GENERIC] check if a pattern is in the buffer + * @buf: the buffer to search + * @td: search pattern descriptor + * + * Check for a pattern at the given place. Used to search bad block + * tables and good / bad block identifiers. Same as check_pattern, but + * no optional empty check + * +*/ +static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td) +{ + int i; + uint8_t *p = buf; + + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[td->offs + i] != td->pattern[i]) + return -1; + } + return 0; +} + +/** * read_bbt - [GENERIC] Read the bad block table starting from page * @mtd: MTD device structure * @buf: temporary buffer @@ -253,7 +276,7 @@ * Create a bad block table by scanning the device * for the given good/bad block identify pattern */ -static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) +static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) { struct nand_chip *this = mtd->priv; int i, j, numblocks, len, scanlen; @@ -271,9 +294,17 @@ else len = 1; } + + if (!(bd->options & NAND_BBT_SCANEMPTY)) { + /* We need only read few bytes from the OOB area */ + scanlen = ooblen = 0; + readlen = bd->len; + } else { + /* Full page content should be read */ scanlen = mtd->oobblock + mtd->oobsize; readlen = len * mtd->oobblock; ooblen = len * mtd->oobsize; + } if (chip == -1) { /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it @@ -285,7 +316,7 @@ if (chip >= this->numchips) { printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", chip + 1, this->numchips); - return; + return -EINVAL; } numblocks = this->chipsize >> (this->bbt_erase_shift - 1); startblock = chip * numblocks; @@ -294,8 +325,30 @@ } for (i = startblock; i < numblocks;) { - nand_read_raw (mtd, buf, from, readlen, ooblen); + int ret; + + if (bd->options & NAND_BBT_SCANEMPTY) + if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen))) + return ret; + for (j = 0; j < len; j++) { + if (!(bd->options & NAND_BBT_SCANEMPTY)) { + size_t retlen; + + /* Read the full oob until read_oob is fixed to + * handle single byte reads for 16 bit buswidth */ + ret = mtd->read_oob(mtd, from + j * mtd->oobblock, + mtd->oobsize, &retlen, buf); + if (ret) + return ret; + + if (check_short_pattern (buf, bd)) { + this->bbt[i >> 3] |= 0x03 << (i & 0x6); + printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", + i >> 1, (unsigned int) from); + break; + } + } else { if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { this->bbt[i >> 3] |= 0x03 << (i & 0x6); printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", @@ -303,9 +356,11 @@ break; } } + } i += 2; from += (1 << this->bbt_erase_shift); } + return 0; } /** @@ -590,14 +645,12 @@ * The function creates a memory based bbt by scanning the device * for manufacturer / software marked good / bad blocks */ -static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) +static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) { struct nand_chip *this = mtd->priv; - /* Ensure that we only scan for the pattern and nothing else */ - bd->options = 0; - create_bbt (mtd, this->data_buf, bd, -1); - return 0; + bd->options &= ~NAND_BBT_SCANEMPTY; + return create_bbt (mtd, this->data_buf, bd, -1); } /** @@ -809,8 +862,14 @@ /* If no primary table decriptor is given, scan the device * to build a memory based bad block table */ - if (!td) - return nand_memory_bbt(mtd, bd); + if (!td) { + if ((res = nand_memory_bbt(mtd, bd))) { + printk (KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n"); + kfree (this->bbt); + this->bbt = NULL; + } + return res; + } /* Allocate a temporary buffer for one eraseblock incl. oob */ len = (1 << this->bbt_erase_shift); @@ -905,14 +964,11 @@ } /* Define some generic bad / good block scan pattern which are used - * while scanning a device for factory marked good / bad blocks - * - * The memory based patterns just - */ + * while scanning a device for factory marked good / bad blocks. */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr smallpage_memorybased = { - .options = 0, + .options = NAND_BBT_SCAN2NDPAGE, .offs = 5, .len = 1, .pattern = scan_ff_pattern @@ -1043,7 +1099,7 @@ res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", - (unsigned int)offs, res, block >> 1); + (unsigned int)offs, block >> 1, res); switch ((int)res) { case 0x00: return 0; diff -Naurw drivers/nand/nand_ecc.c drivers/nand.orig/nand_ecc.c --- a/drivers/nand/nand_ecc.c 2005-11-03 12:42:45.000000000 +0100 +++ b/drivers/nand/nand_ecc.c 2005-11-03 10:42:35.000000000 +0100 @@ -39,6 +39,8 @@ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include <linux/mtd/nand_ecc.h> + /* * Pre-calculated 256-way 1 byte column parity */ @@ -205,7 +207,8 @@ a ^= (b << bit); dat[add] = a; return 1; - } else { + } + else { i = 0; while (d1) { if (d1 & 0x01) @@ -241,3 +244,4 @@ } #endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ + diff -Naurw drivers/nand/nand_ids.c drivers/nand.orig/nand_ids.c --- a/drivers/nand/nand_ids.c 2005-11-03 12:42:45.000000000 +0100 +++ b/drivers/nand/nand_ids.c 2005-11-03 10:46:38.000000000 +0100 @@ -3,13 +3,14 @@ * * Copyright (C) 2002 Thomas Gleixner (tglx(a)linutronix.de) * - * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $ + * $Id: nand_ids.c,v 1.14 2005/06/23 09:38:50 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ + #include <common.h> #if (CONFIG_COMMANDS & CFG_CMD_NAND) @@ -60,17 +61,24 @@ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, + {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, - {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, - /* These are the new chips with large page size. The pagesize * and the erasesize is determined from the extended id bytes */ + /*512 Megabit */ + {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, + {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + /* 1 Gigabit */ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, @@ -107,7 +115,7 @@ * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go * There are more speed improvements for reads and writes possible, but not implemented now */ - {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY}, + {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, {NULL,} }; @@ -122,6 +130,9 @@ {NAND_MFR_NATIONAL, "National"}, {NAND_MFR_RENESAS, "Renesas"}, {NAND_MFR_STMICRO, "ST Micro"}, + {NAND_MFR_HYNIX, "Hynix"}, {0x0, "Unknown"} }; -#endif + +#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ +

2 1

[U-Boot-Users] [PATCH] Update board NetStar
by Ladislav Michl 22 Jul '06

22 Jul '06

Just to sync my local tree with public one. Generated against testing-NAND branch. Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> CHANGELOG: * Update board NetStar Patch by Ladislav Michl, 3 Nov 2005 diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S --- a/board/netstar/crcek.S +++ b/board/netstar/crcek.S @@ -13,6 +13,7 @@ * u32 - crc32 */ +#include <config.h> #include "crcek.h" /** @@ -39,7 +40,7 @@ .macro crcuj, offset, size mov r0, #0 ldr r1, \offset - ldr r2, [r1] + ldr r2, [r1], #4 cmp r2, r0 @ no data, no problem beq 2f tst r2, #3 @ unaligned size @@ -47,7 +48,6 @@ ldr r3, \size cmp r2, r3 @ bogus size bhi 2f - add r1, r1, #4 do_crc32 ldr r1, [r1] 2: @@ -55,16 +55,71 @@ .endm .macro wait, reg - mov \reg, #0x1000 + mov \reg, #0x100000 3: subs \reg, \reg, #0x1 bne 3b - .endm + .text .globl crcek crcek: - b crc2_bad + /* Enable I-cache */ + mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register + mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register + mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register + orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 + mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register + mov r1, #0x00 + mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache + nop + nop + nop + nop + + /* Setup clocking mode */ + ldr r0, MPU_CLKM_BASE @ base of CLOCK unit + ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status + bic r1, r1, #(7 << 11) @ clear clock select + orr r1, r1, #(2 << 11) @ set synchronous scalable + mov r2, #0 +loop: + cmp r2, #1 @ this loop will wait for at least 100 cycles + streqh r1, [r0, #0x18] @ before issuing next request from MPU + add r2, r2, #1 @ on the 1st run code is loaded into I-cache + cmp r2, #16 @ and second run will set clocking mode + bne loop + nop + + /* Setup clock dividers */ + ldr r1, CKCTL_VAL + orr r1, r1, #0x2000 @ enable DSP clock + strh r1, [r0] @ setup clock divisors + + /* Setup DPLL to generate requested freq */ + ldr r0, DPLL1_BASE @ base of DPLL1 register + mov r1, #0x0010 @ set PLL_ENABLE + orr r1, r1, #0x2000 @ set IOB to new locking + orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF + orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF + strh r1, [r0] @ write + +locking: + ldrh r1, [r0] @ get DPLL value + tst r1, #0x01 + beq locking @ while LOCK not set + + /* Enable clock */ + ldr r0, MPU_CLKM_BASE @ base of CLOCK unit + mov r1, #(1 << 10) @ disable idle mode do not check + @ nWAKEUP pin, other remain active + strh r1, [r0, #0x04] + ldr r1, EN_CLK_VAL + strh r1, [r0, #0x08] + mov r1, #0x003f @ FLASH.RP not enabled in idle and + strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN ) + + mov r6, #0 crcuj _LOADER1_OFFSET, _LOADER_SIZE bne crc1_bad @@ -76,9 +131,8 @@ crc1_bad: crc2_bad: ldr r3, _LOADER1_OFFSET ldr r4, _LOADER2_OFFSET - b boot_2nd - tst r6, #3 - beq one_is_bad @ one of them (or both) has bad crc + teq r6, #3 + bne one_is_bad @ one of them (or both) has bad crc ldr r1, [r3, #4] ldr r2, [r4, #4] cmp r1, r2 @ boot 2nd loader if versions differ @@ -90,6 +144,7 @@ one_is_bad: tst r6, #2 bne boot_2nd @ We are doomed, so let user know. +hell: ldr r0, GPIO_BASE @ configure GPIO pins ldr r1, GPIO_DIRECTION strh r1, [r0, #0x08] @@ -171,6 +226,15 @@ CRC32_TABLE: GPIO_BASE: .word 0xfffce000 +MPU_CLKM_BASE: + .word 0xfffece00 +DPLL1_BASE: + .word 0xfffecf00 + +CKCTL_VAL: + .word OMAP5910_ARM_CKCTL +EN_CLK_VAL: + .word OMAP5910_ARM_EN_CLK GPIO_DIRECTION: .word 0x0000ffe7 diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c --- a/board/netstar/crcit.c +++ b/board/netstar/crcit.c @@ -77,7 +77,7 @@ int main(int argc, char **argv) } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) { char *endptr, *nptr = argv[2]; unsigned ver = strtoul(nptr, &endptr, 0); - if (nptr != '\0' && endptr == '\0') + if (*nptr != '\0' && *endptr == '\0') return doit(argv[3], ver); } fprintf(stderr, "Usage: crcit [-v version] <image>\n"); diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c --- a/board/netstar/eeprom.c +++ b/board/netstar/eeprom.c @@ -213,3 +213,4 @@ int eeprom(int argc, char *argv[]) return 0; } + diff --git a/board/netstar/nand.c b/board/netstar/nand.c --- a/board/netstar/nand.c +++ b/board/netstar/nand.c @@ -55,10 +55,11 @@ static int netstar_nand_ready(struct mtd void board_nand_init(struct nand_chip *nand) { - nand->options = NAND_SAMSUNG_LP_OPTIONS; + nand->options = NAND_SAMSUNG_LP_OPTIONS; nand->eccmode = NAND_ECC_SOFT; - nand->hwcontrol = netstar_nand_hwcontrol; + nand->hwcontrol = netstar_nand_hwcontrol; /* nand->dev_ready = netstar_nand_ready; */ nand->chip_delay = 18; } #endif + diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c --- a/board/netstar/netstar.c +++ b/board/netstar/netstar.c @@ -27,7 +27,6 @@ int board_init(void) DECLARE_GLOBAL_DATA_PTR; /* arch number of NetStar board */ - /* TODO: use define from asm/mach-types.h */ gd->bd->bi_arch_number = 692; /* adress of boot parameters */ @@ -53,16 +52,13 @@ int dram_init(void) return 0; } -extern void partition_flash(void); - int misc_init_r(void) { return 0; } -extern void nand_init(void); - int board_late_init(void) { return 0; } + diff --git a/board/netstar/setup.S b/board/netstar/setup.S --- a/board/netstar/setup.S +++ b/board/netstar/setup.S @@ -58,10 +58,10 @@ VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) #endif -VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 +VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 VAL_EMIFF_MRS: .word 0x00000037 -/* +/* * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator) * GPIO07 - LAN91C111 reset */ @@ -106,7 +106,7 @@ MUX_CONFIG_OFFSETS: .align 1 .byte 0x00 @ FUNC_MUX_CTRL_0 .byte 0x04 @ FUNC_MUX_CTRL_1 - .byte 0x08 @ FUNC_MUX_CTRL_2 + .byte 0x08 @ FUNC_MUX_CTRL_2 .byte 0x10 @ FUNC_MUX_CTRL_3 .byte 0x14 @ FUNC_MUX_CTRL_4 .byte 0x18 @ FUNC_MUX_CTRL_5 @@ -145,25 +145,23 @@ platformsetup: nop /* Setup clocking mode */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit - ldrh r1, [r0, #0x18] @ get reset status + ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit + ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status bic r1, r1, #(7 << 11) @ clear clock select orr r1, r1, #(2 << 11) @ set synchronous scalable - mov r2, #0 @ set wait counter to 100 clock cycles - -icache_loop: - cmp r2, #0x01 - streqh r1, [r0, #0x18] - add r2, r2, #0x01 - cmp r2, #0x10 - bne icache_loop + mov r2, #0 +loop: + cmp r2, #1 @ this loop will wait for at least 100 cycles + streqh r1, [r0, #0x18] @ before issuing next request from MPU + add r2, r2, #1 @ on the 1st run code is loaded into I-cache + cmp r2, #16 @ and second run will set clocking mode + bne loop nop - /* Setup clock divisors */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit + /* Setup clock dividers */ ldr r1, _OMAP5910_ARM_CKCTL orr r1, r1, #0x2000 @ enable DSP clock - strh r1, [r0, #0x00] @ setup clock divisors + strh r1, [r0] @ setup clock divisors /* Setup DPLL to generate requested freq */ ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register @@ -182,18 +180,17 @@ locking: ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit mov r1, #(1 << 10) @ disable idle mode do not check @ nWAKEUP pin, other remain active - strh r1, [r0, #0x04] + strh r1, [r0, #0x04] ldr r1, _OMAP5910_ARM_EN_CLK strh r1, [r0, #0x08] mov r1, #0x003f @ FLASH.RP not enabled in idle and - @ max delayed ( 32 x CLKIN ) - strh r1, [r0, #0x0c] + strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN ) /* Configure 5910 pins functions to match our board. */ ldr r0, MUX_CONFIG_BASE adr r1, MUX_CONFIG_VALUES adr r2, MUX_CONFIG_OFFSETS -next_mux_cfg: +next_mux_cfg: ldrb r3, [r2], #1 ldr r4, [r1], #4 cmp r3, #0xff @@ -240,15 +237,15 @@ next_mux_cfg: strh r1, [r0, #0x34] /* Setup clock divisors */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register + ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - strh r1, [r0] @ write + orr r1, r1, #0x2000 @ set IOB to new locking + strh r1, [r0] @ write ulocking: ldrh r1, [r0] @ get DPLL value - tst r1, #1 + tst r1, #1 beq ulocking @ while LOCK not set /* EMIF init */ @@ -257,7 +254,7 @@ ulocking: bic r1, r1, #0x0c @ pwr down disabled, flash WP orr r1, r1, #0x01 str r1, [r0, #0x0c] - + ldr r1, VAL_EMIFS_CS0_CONFIG str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG ldr r1, VAL_EMIFS_CS1_CONFIG

2 1

[U-Boot-Users] PATCH for cmd_mem.c:do_mem_mtest()
by Andrew Dyer 22 Jul '06

22 Jul '06

Sorry the patch below isn't from git - I hope it's still acceptable. I've put a copy in the body and attached it incase gmail decides to line wrap the text. ChangeLog: * Patch by Andrew Dyer, 13 September 2005: if CFG_ALT_MEMTEST is defined without CFG_MEMTEST_SCRATCH, cmd_mem.c code will dereference a null pointer. Change the code to use the last word of the memory test area as the scratch location in this case. Print the scratch memory location used. Signed-off-by: Andrew Dyer <amdyer(a)gmail.com> Index: common/cmd_mem.c =================================================================== RCS file: /home/cvsroot/Projects/u-boot/common/cmd_mem.c,v retrieving revision 1.1.1.1 diff -p -u -r1.1.1.1 cmd_mem.c --- common/cmd_mem.c 28 Jun 2005 17:32:26 -0000 1.1.1.1 +++ common/cmd_mem.c 13 Sep 2005 10:40:26 -0000 @@ -707,7 +707,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int #if defined(CFG_MEMTEST_SCRATCH) vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH; #else - vu_long *dummy = NULL; + vu_long *dummy; #endif int j; int iterations = 1; @@ -747,7 +747,17 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int } #if defined(CFG_ALT_MEMTEST) + +#if !defined(CFG_MEMTEST_SCRATCH) + /* if no fixed scratch area is defined use + * the last location of the test area + */ + end--; + dummy = end; +#endif + printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end); + printf ("using address %08x as scratch\n",dummy); PRINTF("%s:%d: start 0x%p end 0x%p\n", __FUNCTION__, __LINE__, start, end); -- Hardware, n.: The parts of a computer system that can be kicked.

6 16

[U-Boot-Users] My 3 patches
by luo.jinhua 22 Jul '06

22 Jul '06

Hi. Here is my 3 patches. sbc2410x.patch is for the new board -- SBC-2410X. I write this new hardware-specific configurations refer to smdk2410 configurations in U-Boot. File list: MAKEALL Makefile board/sbc2410x/Makefile board/sbc2410x/config.mk board/sbc2410x/flash.c board/sbc2410x/lowlevel_init.S board/sbc2410x/sbc2410x.c board/sbc2410x/u-boot.lds cpu/arm920t/s3c24x0/interrupts.c include/configs/sbc2410x.h This patch adds a new configuration option -- CONFIG_SBC2410X. cmdline_editing.patch implements cmdline-editing extension of readline. I pick codes heavily borrowed from vivi bootloader and integrate them into U-Boot. File list: common/main.c This patch adds a new configuration option -- CONFIG_CMDLINE_EDITING. nand_for_sbc2410x.patch adds nand support for SBC-2410X board. It do that by taking nand controller specific codes (from VCMA9 board) in place. File list: common/cmd_nand.c include/linux/mtd/nand.h include/linux/mtd/nand_ids.h more detail please review: http://sourceforge.net/mailarchive/forum.php?thread_id=8089177&forum_id=128… CHANGELOG item: * Add support for friendly-arm SBC-2410X board Patch by JinHua Luo, 1 Sep 2005 * Add to readline cmdline-editing extension Patch by JinHua Luo, 1 Sep 2005 * Add nand support for SBC-2410X Patch by JinHua Luo, 1 Sep 2005 CREDIT item (if proper): N: JinHua Luo E: luo.jinhua(a)gd-linux.com home_king(a)163.com D: Support for friendly-arm SBC-2410X board D: Add to readline cmdline-editing extension D: Add nand support for SBC-2410X W: www.gd-linux.com Best regards, luo.jinhua -- JinHua Luo, GuangDong Linux Center, <luo.jinhua(a)gd-linux.com>

3 3

[U-Boot-Users] i386 multi_image.
by David Updegraff 22 Jul '06

22 Jul '06

Hi. I think this is needed to correctly boot multi-part images if you are unfortuanate enough to be working on an i386 platform. -dbu. diff --git a/lib_i386/i386_linux.c b/lib_i386/i386_linux.c --- a/lib_i386/i386_linux.c +++ b/lib_i386/i386_linux.c @@ -150,6 +150,11 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, in initrd_start = 0; initrd_end = 0; } + /* <dave(a)cray.com> : if multi-part img. need to advance base ptr */ + if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) { + int i; + for (i=0, addr+=sizeof(int); len_ptr[i++]; addr+=sizeof(int)); + } base_ptr = load_zimage((void*)addr + sizeof(image_header_t), ntohl(hdr->ih_size), initrd_start, initrd_end-initrd_start, 0);

2 1

[U-Boot-Users] [Patch] KVME080 Support
by Sangmoon Kim 22 Jul '06

22 Jul '06

Hi, This patch adds support for KVME080 board. KVME080 is a VME board with MPC8245 CPU. It also patches drivers/cfi_flash.c. First, it adds CFG_FLASH_PROTECT_CLEAR because for some flash memories(such as 28F320C3) all banks are protected after reset. Second, it makes write_buff not to call flash_write_cfibuffer if buffer_size is1. Because for flash memories with buffer_size 1, buffer write is not supported. Third, it makes 64 bit writes to use FLASH_WRITE64 if FLASH_WRITE64 is defined. Because KVME080 needs it. Fourth, it makes flash_detect_cfi call FLASH_PORTWIDTH when changing portwidth if FLASH_PORTWIDTH is defined. Because on some CPUs (such as MPC8245), port width should be changed. Regards, Sangmoon Kim

2 3

[U-Boot-Users] MIPS LE build problems
by Wolfgang Denk 22 Jul '06

22 Jul '06

Dear Thomas, I always wondered what exactly was the reason why I was not able to build the dbau1x00 targets (especially the little endian dbau1550_el target using the ELDK toolchain). Also, I always wondered about the reference to a non-exitent cpu/mips/little/liblittle.a library. Is ther ea special reason for the current settings of build options for the dbau1x00 targets? Attached below is a patch which makes all dbau1x00 targets build fine with the current ELDK, and I believe these settings are more correct than the previous ones. If you don't protest I would like to merge this patch into the public source tree? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Remember, there's a big difference between kneeling down and bending over. - Frank Zappa

6 31

[U-Boot-Users] parse bug in cmd_mii.c
by Andrew Dyer 22 Jul '06

22 Jul '06

I noticed that in do_mii() the code is dereferencing argv[1] without checking what value argc has. This leads to an exception if a command line like 'mii ' is given where argv[1] is NULL. I have a patch, but my cmd_mii.c is carrying around some other patches (some submitted to the list, some local). Is there a good way to separate out the patches I want to submit by themselves? -- Hardware, n.: The parts of a computer system that can be kicked.

2 4

[U-Boot-Users] [PATCH] 02-add-support-for-ps2-keyboard-on-tqm8540-board.patch
by Martin Krause 19 Jul '06

19 Jul '06

This patch replaces the patch add-support-for-ps2-keyboard-on-tqm8540-board.patch send to this list on Thu 17. Nov 2005. Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 02 Dez 2005 This is tested on a STK85XX baseboard. Make sure the PS/2 controller is programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 02 Dez 2005

2 3