August 2005 - U-Boot

[U-Boot-Users] [PATCH] bugfix in cmd_bootm.c when booting at91rm9200dk from dataflash
by Peter Menzebach 06 Oct '05

06 Oct '05

Attached a bugfix, when booting an u-boot image from serial dataflash of at91rm9200dk. In do_bootm, the variable addr was pointing to the virtual address in dataflash, not to the copy in RAM. Patch was submitted to the sourceforge patch area, too. Peter Menzebach

2 1

[U-Boot-Users] [PATCH] Add JFFS2 support for TRAB board
by Martin Krause 06 Oct '05

06 Oct '05

Subject: [PATCH] Add JFFS2 support for TRAB board --- CHANGELOG | 3 +++ include/configs/trab.h | 24 ++++++++++++++++++++---- 2 files changed, 23 insertions(+), 4 deletions(-) 50a9addde722baec91dd20427f52502ea13e29a3 diff --git a/CHANGELOG b/CHANGELOG --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Add JFFS2 support for TRAB board + Patch by Martin Krause, 25 Aug 2005 + * Fixed Bamboo port to enable running without DDR-DIMM (Bamboo has also 64MB onboard DDR) Patch by Stefan Roese, 24 Aug 2005 diff --git a/include/configs/trab.h b/include/configs/trab.h --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -159,10 +159,11 @@ CFG_CMD_BSP | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_USB | \ CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + CFG_CMD_SNTP | \ + CFG_CMD_USB ) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CONFIG_COMMANDS_ADD_HWFLOW | \ @@ -172,10 +173,11 @@ CFG_CMD_BSP | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_USB | \ CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + CFG_CMD_SNTP | \ + CFG_CMD_USB ) #endif /* moved up */ @@ -377,6 +379,20 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 << 10) +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=0" + +/* production flash layout */ +#define MTDPARTS_DEFAULT "mtdparts=0:32k(Firmware1)ro," \ + "16k(Env1)," \ + "16k(Env2)," \ + "320k(Firmware2)ro," \ + "896k(Kernel)," \ + "5376k(Root-FS)," \ + "1408k(JFFS2)," \ + "-(VFD)" + /*----------------------------------------------------------------------- * FLASH and environment organization */ TQ-Systems GmbH Mühlstraße 2, Gut Delling, 82229 Seefeld Tel. +49 (8153) 93 08-157, Fax +49 (8153) 93 08-7157 martin.krause(a)tqs.de www.tq-group.com

2 1

[U-Boot-Users] netconsole.c requires CONFIG_NET_MULTI?
by Marcus Hall 06 Oct '05

06 Oct '05

Is there any reason that netconsole.c requires CONFIG_NET_MULTI to run? I didn't see any dependency, and I removed the check and all seems good. Is there something that I am missing? Thanks! Marcus Hall marcushall(a)lucent.com *** ../u-boot-1.1.3/drivers/netconsole.c Sat Aug 13 17:53:35 2005 --- u-boot/drivers/netconsole.c Wed Aug 24 10:36:33 2005 *************** *** 29,38 **** #include <devices.h> #include <net.h> - #ifndef CONFIG_NET_MULTI - #error define CONFIG_NET_MULTI to use netconsole - #endif - static char input_buffer[512]; static int input_size = 0; /* char count in input buffer */ static int input_offset = 0; /* offset to valid chars in input buffer */ --- 29,34 ----

2 1

[U-Boot-Users] [PATCH 5/5][RESEND] CSB 637 board support
by Anders Larsen 06 Oct '05

06 Oct '05

Hi, the attached patch adds support for the Cogent csb637 board. Patch gzip'ed due to size. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Add support for the Cogent csb637 board --- MAKEALL | 10 Makefile | 3 README | 15 board/csb637/Makefile | 46 + board/csb637/config.mk | 1 board/csb637/csb637.c | 83 + board/csb637/u-boot.lds | 56 + cpu/arm920t/at91rm9200/Makefile | 2 cpu/arm920t/at91rm9200/bcm5221.c | 232 ++++ include/asm-arm/mach-types.h | 2319 +++++++++++++++++++++++++++++++++++++- include/bcm5221.h | 104 ++ include/configs/csb637.h | 235 ++++ 12 files changed, 3058 insertions(+), 48 deletions(-)

2 3

[U-Boot-Users] [PATCH 1/5][RESEND] CSB637 - add KB920x support
by Anders Larsen 06 Oct '05

06 Oct '05

Hi, the patch below adds support for the KwikByte KB920x boards. I resend it (refreshed) since it is touched by the next patch in the series. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Matt <james(a)kwikbyte.com>, 2005-04-27 Add support for the KwikByte KB920x boards --- MAKEALL | 8 +- Makefile | 3 + README | 8 +- board/kb9202/Makefile | 49 ++++++++++ board/kb9202/config.mk | 1 board/kb9202/kb9202.c | 66 +++++++++++++ board/kb9202/lxt972.c | 211 ++++++++++++++++++++++++++++++++++++++++++ board/kb9202/u-boot.lds | 56 +++++++++++ cpu/arm920t/at91rm9200/i2c.c | 4 + include/configs/kb9202.h | 173 ++++++++++++++++++++++++++++++++++ 10 files changed, 571 insertions(+), 8 deletions(-) diff --git a/MAKEALL b/MAKEALL --- a/MAKEALL +++ b/MAKEALL @@ -167,10 +167,10 @@ LIST_ARM7="B2 ep7312 evb4510 impa7 modne LIST_ARM9=" \ at91rm9200dk cmc_pu2 integratorcp integratorap \ - lpd7a400 mx1ads mx1fs2 omap1510inn \ - omap1610h2 omap1610inn omap730p2 scb9328 \ - smdk2400 smdk2410 trab VCMA9 \ - versatile voiceblue \ + kb9202 lpd7a400 mx1ads mx1fs2 \ + omap1510inn omap1610h2 omap1610inn omap730p2 \ + scb9328 smdk2400 smdk2410 trab \ + VCMA9 versatile voiceblue \ " ######################################################################### diff --git a/Makefile b/Makefile --- a/Makefile +++ b/Makefile @@ -1390,6 +1390,9 @@ integratorap_config : unconfig integratorcp_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs integratorcp +kb9202_config : unconfig + @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + lpd7a400_config \ lpd7a404_config: unconfig @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x diff --git a/README b/README --- a/README +++ b/README @@ -305,10 +305,10 @@ The following options need to be configu CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, - CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_VCMA9 + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400 + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, + CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------ diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile new file mode 100644 --- /dev/null +++ b/board/kb9202/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Adapted for KwikByte KB920x boards - APR2005 +# +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := kb9202.o lxt972.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk new file mode 100644 --- /dev/null +++ b/board/kb9202/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000 diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c new file mode 100644 --- /dev/null +++ b/board/kb9202/kb9202.c @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board from at91rm9200dk.c: 22APR2005 + */ + +#include <common.h> +#include <asm/arch/AT91RM9200.h> + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +void lowlevel_init(void) { + /* Required by assembly functions - do nothing */ +} + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Enable Ctrlc */ + console_init_f (); + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + gd->bd->bi_arch_number = MACH_TYPE_KB9200; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff --git a/board/kb9202/lxt972.c b/board/kb9202/lxt972.c new file mode 100644 --- /dev/null +++ b/board/kb9202/lxt972.c @@ -0,0 +1,211 @@ +/* + * + * (C) Copyright 2003 + * Author : Hamid Ikdoumi (Atmel) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board: 22APR2005 + */ + +#include <at91rm9200_net.h> +#include <net.h> +#include <lxt971a.h> + +#ifdef CONFIG_DRIVER_ETHER + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +/* + * Name: + * lxt972_IsPhyConnected + * Description: + * Reads the 2 PHY ID registers + * Arguments: + * p_mac - pointer to AT91S_EMAC struct + * Return value: + * TRUE - if id read successfully + * FALSE- if error + */ +static unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac) +{ + unsigned short Id1, Id2; + + at91rm9200_EmacEnableMDIO (p_mac); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID1, &Id1); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID2, &Id2); + at91rm9200_EmacDisableMDIO (p_mac); + + if ((Id1 == (0x0013)) && ((Id2 & 0xFFF0) == 0x78E0)) + return TRUE; + + return FALSE; +} + +/* + * Name: + * lxt972_GetLinkSpeed + * Description: + * Link parallel detection status of MAC is checked and set in the + * MAC configuration registers + * Arguments: + * p_mac - pointer to MAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac) +{ + unsigned short stat1; + + if (!at91rm9200_EmacReadPhy (p_mac, PHY_LXT971_STAT2, &stat1)) + return FALSE; + + if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link status up? */ + return FALSE; + + if (stat1 & PHY_LXT971_STAT2_100BTX) { + + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + + /*set Emac for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + } else { + + /*set Emac for 100BaseTX and Half Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_SPD; + } + + return TRUE; + + } else { + + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + } else { + + /*set MII for 10BaseT and Half Duplex */ + p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD); + } + + return TRUE; + } + + return FALSE; +} + + +/* + * Name: + * lxt972_InitPhy + * Description: + * MAC starts checking its link by using parallel detection and + * Autonegotiation and the same is set in the MAC configuration registers + * Arguments: + * p_mac - pointer to struct AT91S_EMAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac) +{ + UCHAR ret = TRUE; + unsigned short IntValue = 0; + + at91rm9200_EmacEnableMDIO (p_mac); + + if (!lxt972_GetLinkSpeed (p_mac)) { + /* Try another time */ + ret = lxt972_GetLinkSpeed (p_mac); + } + + /* Disable PHY Interrupts */ + at91rm9200_EmacWritePhy (p_mac, PHY_LXT971_INT_ENABLE, 0); + + at91rm9200_EmacDisableMDIO (p_mac); + + return (ret); +} + + +/* + * Name: + * lxt972_AutoNegotiate + * Description: + * MAC Autonegotiates with the partner status of same is set in the + * MAC configuration registers + * Arguments: + * dev - pointer to struct net_device + * Return value: + * TRUE - if link status set successfully + * FALSE - if link status not set + */ +static UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status) +{ + unsigned short value; + unsigned short PhyAnalpar; + + /* Set lxt972 control register */ + if (!at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_CTRL, &value)) + return FALSE; + + /* Restart Auto_negotiation */ + value |= PHY_COMMON_CTRL_RES_AUTO; + if (!at91rm9200_EmacWritePhy (p_mac, PHY_COMMON_CTRL, &value)) + return FALSE; + + /*check AutoNegotiate complete */ + udelay (10000); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_STAT, &value); + if (!(value & PHY_COMMON_STAT_AN_COMP)) + return FALSE; + + return (lxt972_GetLinkSpeed (p_mac)); +} + + +/* + * Name: + * at91rm92000_GetPhyInterface + * Description: + * Initialise the interface functions to the PHY + * Arguments: + * None + * Return value: + * None + */ +void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops) +{ + p_phyops->Init = lxt972_InitPhy; + p_phyops->IsPhyConnected = lxt972_IsPhyConnected; + p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed; + p_phyops->AutoNegotiate = lxt972_AutoNegotiate; +} + +#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/board/kb9202/u-boot.lds b/board/kb9202/u-boot.lds new file mode 100644 --- /dev/null +++ b/board/kb9202/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm920t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c --- a/cpu/arm920t/at91rm9200/i2c.c +++ b/cpu/arm920t/at91rm9200/i2c.c @@ -64,10 +64,14 @@ at91_xfer(unsigned char chip, unsigned i twi->TWI_MMR = (chip << 16) | (alen << 8) | ((rw == 1) ? AT91C_TWI_MREAD : 0); +#ifdef CONFIG_KB920x + twi->TWI_IADR = addr; +#else /* Set TWI Internal Address Register with first messages data field */ /* only one address byte is supported */ if (alen > 0) twi->TWI_IADR = addr & 0xff; +#endif length = len; buf = buffer; diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h new file mode 100644 --- /dev/null +++ b/include/configs/kb9202.h @@ -0,0 +1,173 @@ +/* + * Rick Bronson <rick(a)efn.org> + * + * Configuation settings for the AT91RM9200DK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */ +#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ +/* Only define one of the following, based on board type */ +/* #define CONFIG_KB9200 1 KwikByte KB9202 board */ +/* #define CONFIG_KB9201 1 KwikByte KB9202 board */ +#define CONFIG_KB9202 1 /* KwikByte KB9202 board */ + +#define CONFIG_KB920x 1 /* Any KB920x board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define USE_920T_MMU 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CFG_LONGHELP + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +#define CONFIG_BAUDRATE 115200 + +/* + * Hardware drivers + */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_DBGU +#undef CONFIG_USART0 +#undef CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_I2C | \ + CFG_CMD_PING | \ + CFG_CMD_DHCP ) & \ + ~(CFG_CMD_BDI | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024) + +#define CONFIG_DRIVER_ETHER +#define CONFIG_NET_RETRY_COUNT 20 + +#define CFG_FLASH_BASE 0x10000000 + +#ifdef CONFIG_KB9202 +#define PHYS_FLASH_SIZE 0x1000000 +#else +#define PHYS_FLASH_SIZE 0x200000 +#endif + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CONFIG_HARD_I2C + +#define CFG_ENV_IS_IN_EEPROM + +#ifdef CONFIG_KB9202 +#define CFG_ENV_OFFSET 0x3000 +#define CFG_ENV_SIZE 0x1000 +#else +#define CFG_ENV_OFFSET 0x1000 +#define CFG_ENV_SIZE 0x1000 +#endif +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0 /* not used */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI + +#ifndef __ASSEMBLY__ +/*----------------------------------------------------------------------- + * Board specific extension for bd_info + * + * This structure is embedded in the global bd_info (bd_t) structure + * and can be used by the board specific code (eg board/...) + */ + +struct bd_info_ext { + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; +}; +#endif + +#define CFG_HZ 1000 +#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif

6 15

[U-Boot-Users] [PATCH 4/5][RESEND] CSB637 - set asynchronous clock mode
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the patch below selects AT91RM9200 asynchronous clock mode which improves the execution speed by a factor of ~4. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-05-03 Set AT91RM9200 asynchronous clocking mode --- cpu/arm920t/at91rm9200/lowlevel_init.S | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -123,6 +123,11 @@ LoopOsc: cmp r2, r0 bne 2b + /* switch from FastBus to Asynchronous Clocking Mode */ + mrc p15, 0, r0, c1, c0, 0 + orr r0, r0, #0xC0000000 @ set bit 31 (iA) and 30 (nF) + mcr p15, 0, r0, c1, c0, 0 + /* everything is fine now */ mov pc, lr

2 2

[U-Boot-Users] [PATCH 3/5][RESEND] CSB637 - fix dm9161 PHY interrupt mask
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the patch below fixes a bug in the dm9161 interrupt masking; a bit set /disables/ (masks) the interrupt. Furthermore, the PHY is explicitly (re)connected when auto- negotiation is started. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Mask DM9161 interrupts correctly --- cpu/arm920t/at91rm9200/dm9161.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/cpu/arm920t/at91rm9200/dm9161.c b/cpu/arm920t/at91rm9200/dm9161.c --- a/cpu/arm920t/at91rm9200/dm9161.c +++ b/cpu/arm920t/at91rm9200/dm9161.c @@ -138,9 +138,9 @@ UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac) /* Disable PHY Interrupts */ at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue); - /* clear FDX, SPD, Link, INTR masks */ - IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK | - DM9161_LINK_MASK | DM9161_INTR_MASK); + /* set FDX, SPD, Link, INTR masks */ + IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK | + DM9161_LINK_MASK | DM9161_INTR_MASK); at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue); at91rm9200_EmacDisableMDIO (p_mac); @@ -190,6 +190,7 @@ UCHAR dm9161_AutoNegotiate (AT91PS_EMAC return FALSE; /* Restart Auto_negotiation */ value |= DM9161_RESTART_AUTONEG; + value &= ~DM9161_ISOLATE; if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) return FALSE;

2 2

[U-Boot-Users] [PATCH 2/5][RESEND] CSB637 - move PHY code to common directory
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the attached patch moves the at91rm9200 PHY code from the board specific directories into cpu/arm920t/at91rm9200 to avoid excess code duplication. Patch gzip'ed due to size. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Move the AT91RM9200 PHY code into a common directory --- board/at91rm9200dk/Makefile | 2 board/at91rm9200dk/at91rm9200dk.c | 26 ++++ board/at91rm9200dk/dm9161.c | 243 ------------------------------------- board/cmc_pu2/Makefile | 2 board/cmc_pu2/cmc_pu2.c | 26 ++++ board/cmc_pu2/dm9161.c | 243 ------------------------------------- board/kb9202/Makefile | 2 board/kb9202/kb9202.c | 33 +++++ board/kb9202/lxt972.c | 211 -------------------------------- cpu/arm920t/at91rm9200/Makefile | 2 cpu/arm920t/at91rm9200/dm9161.c | 224 ++++++++++++++++++++++++++++++++++ cpu/arm920t/at91rm9200/ether.c | 2 cpu/arm920t/at91rm9200/lxt972.c | 192 +++++++++++++++++++++++++++++ include/at91rm9200_net.h | 2 include/dm9161.h | 8 + 15 files changed, 510 insertions(+), 708 deletions(-)

2 2

[U-Boot-Users] [PATCH 4/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch switches the at91rm9200 to asynchronous clocking mode after initialization (it would otherwise stay in FastBus mode which is the _slowest_ clock mode). This lets the core run at full speed when not doing bus accesses, increasing overall performance by a factor of four. The performance difference between asynchronous ans synchronous clocking mode as measured with nbench 2.2.2 disappears in the statistical noise; since asynchronous clocking mode imposes less restrictions on the clock frequencies it is the mode of choice. This patch replaces my similar patch from 2005-04-29. Changelog: * patch by Anders Larsen, 2005-05-03 set the at91rm9200 to asynchronous clocking mode Cheers Anders

2 1

[U-Boot-Users] [PATCH 4/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch switches the at91rm9200 to synchronous clock mode after initialization (it would otherwise stay in FastBus mode which is the _slowest_ clock mode). This lets the core run at full speed when not doing bus accesses, increasing overall performance by a factor of four. Changelog: * patch by Anders Larsen, 2004-04-29 set the at91rm9200 clock to synchronous mode Cheers Anders

3 3