August 2005 - U-Boot

[U-Boot-Users] gunzip question about large uImages
by Robin Getz 13 Mar '06

13 Mar '06

Quick Question: It looks to me that the max uncompressed image size is hard coded to 4Meg (0x400000 bytes). Any thoughts why? Long question: We were having some problems booting large uImages (reported here ~ month ago). It seemed as if the were not being decompressed properly. When we had someone (Aubrey Li) dig into it he found/pointed out that in the latest cvs, u-boot/common/cmd_bootm.c the function do_bootm defines what looks to be a uncompressed max length as: uint unc_len = 0x400000; This is passed to gunzip if the image needs to be uncompressed. --snip-- case IH_COMP_GZIP: printf (" Uncompressing %s ... ", name); if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, (uchar *)data, &len) != 0) { puts ("GUNZIP ERROR - must RESET board to recover\n"); SHOW_BOOT_PROGRESS (-6); do_reset (cmdtp, flag, argc, argv); } break; --snip-- gunzip takes this as the second parameter and sets it to dstlen. int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp) This is passed to the inflation routine as s.avail_out = dstlen; where inflate from u-boot/lib_generic/zlib.c uses this to halt decompression if the image size can not fit. -- snip -- from int inflate(z, f) -- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) r = inflate_packet_flush(z->state->blocks); --snip -- from local int inflate_flush(s, z, r)-- /* compute number of bytes to copy as far as end of window */ n = (uInt)((q <= s->write ? s->write : s->end) - q); if (n > z->avail_out) n = z->avail_out; if (n && r == Z_BUF_ERROR) r = Z_OK; /* update counters */ z->avail_out -= n; z->total_out += n; -- When unc_len is increased - our problem goes away... So: two questions: - what is the best way to manage the size of unc_len? in include/configs/platform.h? Or just make it really_really big? - do you want a patch in u-boot/common/cmd_bootm.c/gunzip to check to see if the image was completely decompressed? OR - do you want a patch in u-boot/lib_generic/zlib.c to return an error if it runs out of room? Thanks -Robin

2 1

[U-Boot-Users] Why exceptions are enabled before exception vector code is copied
by Cedric VINCENT 13 Mar '06

13 Mar '06

Dear Wolfgang. Can I ask you why exceptions are enabled before exception vector code is copied to the low RAM pages ? (I am talking about U-Boot/PPC) On my board, U-Boot crashes before relocation (when debugging) since Xilinx Microprocessor Debugger (XMD) makes a spurious "Machine Check Exception". For other reasons, such an exception could arrived before u-boot starts. Finally, it is a bug or a very strange coding behaviour... Cedric VINCENT.

2 6

[U-Boot-Users] [PATCH] I2C2 support for MPC8548CDS
by Zajac Adam-AAZ004 13 Mar '06

13 Mar '06

The attached patch adds I2C2 support for the MPC8548CDS board. I've performed a limited testing on our MPC8548CDS board and everything seems to be working fine. Since this processor is brand new, I may need to revise the changes when we build our real system based on '8548. Thanks, Adam Zajac <<mpc8548cds_i2c2.patch.gz>>

2 1

[U-Boot-Users] malloc with no return check?
by Andrew Dyer 13 Mar '06

13 Mar '06

I noticed the au1xxx ethernet driver has a malloc where the return value isn't checked. I did some more looking while waiting for a slow flash programmer and at least these files seem to do the same thing: ./drivers/ns8382x.c ./drivers/bcm570x.c ./drivers/rtl8139.c ./drivers/eepro100.c ./drivers/dc2114x.c ./drivers/e1000.c ./drivers/sk98lin/skge.c ./drivers/cfb_console.c ./drivers/natsemi.c ./drivers/inca-ip_sw.c ./drivers/rtl8169.c ./drivers/pcnet.c ./cpu/mips/au1x00_eth.c ./cpu/ppc4xx/serial.c ./cpu/ppc4xx/405gp_enet.c ./cpu/ppc4xx/440gx_enet.c ./cpu/i386/serial.c ./cpu/mpc8xx/scc.c ./common/hush.c ./cpu/mpc8xx/spi.c ?maybe ./cpu/mpc8260/spi.c ?maybe ./cpu/mpc85xx/ether_fcc.c ./cpu/mpc8260/ether_fcc.c ./cpu/mpc5xxx/fec.c ./cpu/mpc8220/fec.c ./tools/easylogo/easylogo.c I didn't look under the board directory or check all varieties of alloc :-) I will submit patches for the mips stuff hopefully next week. -- Hardware, n.: The parts of a computer system that can be kicked.

3 4

[U-Boot-Users] [PATCH] in tftp client, recover from lost ACKs
by Brenda J. Butler 13 Mar '06

13 Mar '06

CHANGELOG entry: * Patch by John McCarthy and Brenda J. Butler, 8 July 2005 When the tftp client sends an ack but it gets lost, the server will resend the block. The client was now expecting the next block and ignored this block, the server never got an ack, and they got stuck. Now the tftp client will ack the block the second (and subsequent) time(s) allowing the tftp session to proceed. This little fix assumes that the server will resend exactly the same contents (same size from same offset). Here is the patch for you to look at; it is also in an attachment where the tabs and lines are preserved better. Apply to top of head checkout with patch -p0 < uboot2.patch Index: net/tftp.c =================================================================== RCS file: /u00/cvs/u-boot3/net/tftp.c,v retrieving revision 1.1 retrieving revision 1.3 diff -u -r1.1 -r1.3 --- net/tftp.c 15 Mar 2005 17:53:28 -0000 1.1 +++ net/tftp.c 5 Jul 2005 19:48:46 -0000 1.3 @@ -246,17 +246,17 @@ } } - if (TftpBlock == TftpLastBlock) { - /* - * Same block again; ignore it. - */ - break; - } - TftpLastBlock = TftpBlock; NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); - store_block (TftpBlock - 1, pkt + 2, len); + if (TftpBlock != TftpLastBlock) { + /* + * Same block again; do everything again + * except store it. Hope the server sent + * exactly the same length/contents. + */ + store_block (TftpBlock - 1, pkt + 2, len); + } /* * Acknoledge the block just received, which will prompt

2 1

[U-Boot-Users] [PATCH] fix [id]cache_status for MPC85xx processors
by Murray.Jensen＠csiro.au 13 Mar '06

13 Mar '06

The existing code for the [id]cache_status commands on MPC85xx processors looks at the wrong bit to determine if the L1 cache is enabled. It looks at the most significant bit when it should look at the least significant bit. This patch corrects this bug. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 19, 2005: - fix bug in [id]cache_status commands for MPC85xx processors; should look at LSB of L1CSRn registers to determine if L1 cache is enabled, not the MSB. Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] fix fw_setenv with uninitialised environment
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

In tools/env/fw_env.c when the environment is uninitialised, and the default_environment[] array is used instead, if a setenv is done there is a good chance that the array bounds will be exceeded. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 15, 2005: - fix array overflow with fw_setenv on uninitialised environment Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] PATCH: Add support for EmbeddedPlanet EP88x boards
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch adds support for EmbeddedPlanet EP88x boards. It was tested on EP88xC board with MPC885 processor, 64MB RAM, and 16MB flash. CHANGELOG Add support for EmbeddedPlanet EP88x boards -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

3 5

[U-Boot-Users] extra headers in xilinx ml300 board
by Michael Libeskind 12 Mar '06

12 Mar '06

/board/xilinx/xilinx_enet/emac_adapter.c and /board/xilinx/xilinx_iic/iic_adapter.c both have a #include <configs/ml300.h> which I believe prevents users from making other board configs under the /board/xilinx directory based on the ML300 that use the xilinx_enet and xilinx_iic adapaters. Can this be removed?

2 3

[U-Boot-Users] [PATCH] board support for the mpc8540eval board
by Ron Alder 12 Mar '06

12 Mar '06

The attached patch adds support for the MPC8540 EVAL board. The patch is based on the top of the cvs tree as of 11 July 2005. CHANGELOG entry: * Patch by Ron Alder, 11 July 2005 Add Xianghua Xiao and Lunsheng Wang's support for the GDA MPC8540 EVAL board.

2 1

[U-Boot-Users] [PATCH] add support for Nat Semi DP83865 PHY to MPC85xx TSEC driver
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds support for the National Semiconductor DP83865 gigabit ethernet PHY to the MPC85xx TSEC ethernet driver. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add Nat Semi DP83865 PHY support to MPC85xx TSEC driver Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] add (some) definitions for MPC85xx local bus controller
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds (some) definitions for the MPC85xx local bus controller register bits, in a similar vein to the MPC8260 memory controller, which is almost identical. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add (some) definitions for the MPC85xx local bus controller Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] CPM I/O port pin functions for MPC85xx
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds the file "include/asm-ppc/iopin_85xx.h" which mirrors the functions in "include/asm-ppc/iopin_8260.h" for manipulating the CPM2 I/O pins for MPC85xx processors (that have a CPM). Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add CPM2 I/O pin functions for MPC85xx processors Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] fix conditional for including ks8695eth driver
by Greg Ungerer 12 Mar '06

12 Mar '06

Move the c-preprocessor conditional check for compiling the ks8695eth driver code to after including the headers. Otherwise it can never be compiled in. Index: drivers/ks8695eth.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/ks8695eth.c,v retrieving revision 1.2 diff -u -r1.2 ks8695eth.c --- drivers/ks8695eth.c 23 May 2005 10:49:51 -0000 1.2 +++ drivers/ks8695eth.c 3 Jun 2005 14:13:54 -0000 @@ -18,8 +18,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifdef CONFIG_DRIVER_KS8695ETH - /****************************************************************************/ #include <common.h> @@ -28,6 +26,7 @@ #include <asm/io.h> #include <asm/arch/platform.h> +#ifdef CONFIG_DRIVER_KS8695ETH /****************************************************************************/ /*

3 3

[U-Boot-Users] [PATCH] dhcp vendor fields - support opt bootfile, ignore tftp server
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds support for the dhcp vendor optional bootfile (#67). It also ignores the vendor tftp server name option (#66). Both of these are supplied by the DEC Tru64 Unix dhcp server (called "join"), and in the case of the bootfile, it is the only place the boot file name is supplied. There is a perfectly good, 128 byte, field in the main bootp/dhcp packet where the boot file name could have been stored, but it wasn't used - go figure. Cheers! Murray... -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] Fix RGMII support in 8548 CDS
by Andy Fleming 12 Mar '06

12 Mar '06

This patch fixes a hw timing issue on 8548 CDS for eTSEC 3 in RGMII mode: Index: tsec.h =================================================================== RCS file: /cm/vault/u-boot/u-boot/cpu/mpc85xx/tsec.h,v retrieving revision 1.1.1.1.4.6 diff -r1.1.1.1.4.6 tsec.h 111c111 < #define MIIM_CIS8204_EPHYCON_RGMII 0x1000 --- > #define MIIM_CIS8204_EPHYCON_RGMII 0x1100

2 1

[U-Boot-Users] LXT971A PHY debugging on MPC8540 Custom Board
by Shirasat Girish-ags032 12 Mar '06

12 Mar '06

Hi , I have partially ported Uboot on one of our MPC8540 based custom boards. I am currently facing problems in bringing up the 10/100Mbps FEC interface. We are using the LXT971A PHY for the FEC interface. Well the problem is that , the MAC is putting out the data but the PHY is failing to put the data on the line. The PHY is successfully able to auto- negotiate. The MAC putting out data was confirmed by the MAC debug registers and by probing the Tx_EN,clock and TX_D lines. I carried out the MAC loop back test which passed . Then went on for the PHY internal loop back test. Well, when the loop back is enabled the MAC fails to transmit the frame successfully. The thing confusing me is that why the MAC frame transmission is getting affected when i enable the PHY loopback test. Any pointers will be very helpful. Regards, Girish

3 3

[U-Boot-Users] [Patch][CVS] Updating for RPXlite_DW---20050619
by Sam Song 12 Mar '06

12 Mar '06

Hi list, To make things better on RPXlite DW board with more flexible functions, a small patch added and tested. I change ifdef to make this patch work online this time. Best regards, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Add netconsole and several useful commands. ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: include/configs/RPXlite_DW.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/RPXlite_DW.h,v retrieving revision 1.6 diff -p -u -r1.6 RPXlite_DW.h --- include/configs/RPXlite_DW.h 22 Jan 2005 18:13:06 -0000 1.6 +++ include/configs/RPXlite_DW.h 19 Jun 2005 13:44:10 -0000 @@ -45,7 +45,7 @@ */ /* #define DEBUG 1 */ -/* #ifdef DEPLOYMENT 1 */ +/* #define DEPLOYMENT 1 */ #undef CONFIG_MPC860 #define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ @@ -117,6 +117,36 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +#if 1 /* Enable this staff could make image enlarge about 25KB. Mask it if you + don't want the advanced function */ + +#ifdef CONFIG_SPLASH_SCREEN +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#else +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#endif /* CONFIG_SPLASH_SCREEN */ + +/* test-only */ +#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ +#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + +#define CONFIG_NETCONSOLE + +#endif /* 1 */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -446,5 +476,6 @@ #define CONFIG_SERVERIP 172.16.115.6 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/ #define CONFIG_BOOTFILE uImage.rpxusb +#define CONFIG_HOSTNAME LITE_H1_DW #endif /* __CONFIG_H */

2 1

[U-Boot-Users] [Patch][CVS] Fix a dummy pci prototype declaration
by Sam Song 12 Mar '06

12 Mar '06

Hi list, I happened to find the mistaken declaration on pci_cfgfunc_nothing in include/pci.h. Thanks for Wolfgang help me confirm that:-) Best regards, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Fix the mistaken declaration on pci_cfgfunc_nothing Best regards, Sam ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: include/pci.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/pci.h,v retrieving revision 1.3 diff -p -u -r1.3 pci.h --- include/pci.h 31 May 2003 18:35:28 -0000 1.3 +++ include/pci.h 19 Jun 2005 12:57:39 -0000 @@ -336,8 +336,8 @@ struct pci_config_table { unsigned long priv[3]; }; -extern void pci_cfgfunc_nothing(struct pci_controller* hose, pci_dev_t dev, - struct pci_config_table *); +extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev, + struct pci_config_table *); extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *);

2 1

[U-Boot-Users] [Patch][CVS] Adjust CFG_CMD_ECHO as default ENV setting
by Sam Song 12 Mar '06

12 Mar '06

Hi list, Attached patch makes up a fix on CFG_CMD_ECHO. To avoid breaking exists boards, I adjust "echo" as a default command with aggreement of Wolfgang. For the sake of it's effect on all boards, pls check this one more carefully. About 12 boards related was fixed as well. Fix policy is that if CONFIG_CMD_DFL is used, CFG_CMD_ECHO shouldn't be redefined. Did I fix too much or not enough? Ideas pls... Sorry for the late. I just made my PC get CVS tree:-( CVS hasn't supported proxy. It brings me some troubles more or less. Thanks for all your concern, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Adjust echo as a defalut command. Best regards, Sam ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: README =================================================================== RCS file: /cvsroot/u-boot/u-boot/README,v retrieving revision 1.126 diff -p -u -r1.126 README --- README 3 May 2005 14:12:25 -0000 1.126 +++ README 19 Jun 2005 12:27:42 -0000 @@ -590,7 +590,7 @@ The following options need to be configu CFG_CMD_DIAG * Diagnostics CFG_CMD_DOC * Disk-On-Chip Support CFG_CMD_DTT * Digital Therm and Thermostat - CFG_CMD_ECHO * echo arguments + CFG_CMD_ECHO echo arguments CFG_CMD_EEPROM * EEPROM read/write support CFG_CMD_ELF * bootelf, bootvx CFG_CMD_ENV saveenv Index: common/command.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/command.c,v retrieving revision 1.18 diff -p -u -r1.18 command.c --- common/command.c 6 Apr 2005 00:04:17 -0000 1.18 +++ common/command.c 19 Jun 2005 12:27:51 -0000 @@ -42,6 +42,8 @@ U_BOOT_CMD( NULL ); +#if (CONFIG_COMMANDS & CFG_CMD_ECHO) + int do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -74,6 +76,8 @@ U_BOOT_CMD( " - echo args to console; \\c suppresses newline\n" ); +#endif /* CFG_CMD_ECHO */ + #ifdef CFG_HUSH_PARSER int Index: include/cmd_confdefs.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/cmd_confdefs.h,v retrieving revision 1.22 diff -p -u -r1.22 cmd_confdefs.h --- include/cmd_confdefs.h 1 Apr 2005 00:25:45 -0000 1.22 +++ include/cmd_confdefs.h 19 Jun 2005 12:27:53 -0000 @@ -110,7 +110,6 @@ CFG_CMD_DIAG | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_EXT2 | \ Index: include/configs/ISPAN.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ISPAN.h,v retrieving revision 1.2 diff -p -u -r1.2 ISPAN.h --- include/configs/ISPAN.h 31 Dec 2004 09:32:53 -0000 1.2 +++ include/configs/ISPAN.h 19 Jun 2005 12:27:55 -0000 @@ -108,7 +108,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ Index: include/configs/MIP405.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/MIP405.h,v retrieving revision 1.10 diff -p -u -r1.10 MIP405.h --- include/configs/MIP405.h 23 Feb 2004 22:22:33 -0000 1.10 +++ include/configs/MIP405.h 19 Jun 2005 12:27:56 -0000 @@ -58,7 +58,6 @@ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ Index: include/configs/PIP405.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/PIP405.h,v retrieving revision 1.8 diff -p -u -r1.8 PIP405.h --- include/configs/PIP405.h 20 Jan 2004 23:12:34 -0000 1.8 +++ include/configs/PIP405.h 19 Jun 2005 12:27:57 -0000 @@ -50,7 +50,6 @@ CFG_CMD_PCI | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO | \ Index: include/configs/RPXsuper.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/RPXsuper.h,v retrieving revision 1.3 diff -p -u -r1.3 RPXsuper.h --- include/configs/RPXsuper.h 20 Jan 2004 23:12:34 -0000 1.3 +++ include/configs/RPXsuper.h 19 Jun 2005 12:27:58 -0000 @@ -154,7 +154,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_IMMAP | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO & \ ~CFG_CMD_KGDB ) Index: include/configs/Rattler.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/Rattler.h,v retrieving revision 1.2 diff -p -u -r1.2 Rattler.h --- include/configs/Rattler.h 5 May 2005 09:13:21 -0000 1.2 +++ include/configs/Rattler.h 19 Jun 2005 12:27:59 -0000 @@ -125,7 +125,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_MII \ Index: include/configs/TQM5200.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/TQM5200.h,v retrieving revision 1.12 diff -p -u -r1.12 TQM5200.h --- include/configs/TQM5200.h 2 Apr 2005 22:37:55 -0000 1.12 +++ include/configs/TQM5200.h 19 Jun 2005 12:28:00 -0000 @@ -161,7 +161,6 @@ CFG_CMD_ASKENV | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_MII | \ Index: include/configs/ZPC1900.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ZPC1900.h,v retrieving revision 1.5 diff -p -u -r1.5 ZPC1900.h --- include/configs/ZPC1900.h 9 Oct 2004 23:33:43 -0000 1.5 +++ include/configs/ZPC1900.h 19 Jun 2005 12:28:01 -0000 @@ -112,7 +112,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ Index: include/configs/gw8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/gw8260.h,v retrieving revision 1.2 diff -p -u -r1.2 gw8260.h --- include/configs/gw8260.h 27 Jun 2003 21:32:46 -0000 1.2 +++ include/configs/gw8260.h 19 Jun 2005 12:28:02 -0000 @@ -305,7 +305,6 @@ CFG_CMD_BEDBUG | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_IMMAP | \ CFG_CMD_MII) Index: include/configs/ppmc8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ppmc8260.h,v retrieving revision 1.4 diff -p -u -r1.4 ppmc8260.h --- include/configs/ppmc8260.h 25 Mar 2004 15:14:45 -0000 1.4 +++ include/configs/ppmc8260.h 19 Jun 2005 12:28:04 -0000 @@ -279,7 +279,6 @@ #define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_MEMTEST | \ CFG_CMD_MII | \ Index: include/configs/sacsng.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/sacsng.h,v retrieving revision 1.7 diff -p -u -r1.7 sacsng.h --- include/configs/sacsng.h 25 Mar 2004 15:14:45 -0000 1.7 +++ include/configs/sacsng.h 19 Jun 2005 12:28:07 -0000 @@ -507,7 +507,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ @@ -520,7 +519,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ Index: include/configs/sbc8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/sbc8260.h,v retrieving revision 1.11 diff -p -u -r1.11 sbc8260.h --- include/configs/sbc8260.h 11 Jul 2004 21:49:43 -0000 1.11 +++ include/configs/sbc8260.h 19 Jun 2005 12:28:09 -0000 @@ -448,7 +448,6 @@ #ifdef CONFIG_ETHER_ON_FCC # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ @@ -459,7 +458,6 @@ #else # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ Index: include/configs/utx8245.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/utx8245.h,v retrieving revision 1.3 diff -p -u -r1.3 utx8245.h --- include/configs/utx8245.h 5 Jun 2003 15:40:53 -0000 1.3 +++ include/configs/utx8245.h 19 Jun 2005 12:28:10 -0000 @@ -91,7 +91,6 @@ protect on $(u-boot_startaddr) $(u-boot_ | CFG_CMD_ENV | CFG_CMD_CONSOLE \ | CFG_CMD_LOADS | CFG_CMD_LOADB \ | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_RUN | CFG_CMD_ECHO \ | CFG_CMD_REGINFO | CFG_CMD_NET\ | CFG_CMD_DHCP | CFG_CMD_I2C \ | CFG_CMD_DATE)

2 1

[U-Boot-Users] Patch to cpu/mpc8260/speed.c
by KokHow Teh 12 Mar '06

12 Mar '06

Hi; I am using u-boot-1.1.2 and I am sending this minor patch to the cpu/mpc8260/speed.c file in view of MPC8280EC document which lays down how the PCIDF is calculated but not reflected correctly in the file. Index: cpu/mpc8260/speed.c =================================================================== RCS file: /usr/cvsroot/u-boot/cpu/mpc8260/speed.c,v retrieving revision 1.2 diff -u -b -B -r1.2 speed.c --- cpu/mpc8260/speed.c 28 Apr 2005 07:01:04 -0000 1.2 +++ cpu/mpc8260/speed.c 16 Jun 2005 04:35:12 -0000 @@ -202,11 +202,12 @@ volatile immap_t *immap = (immap_t *) CFG_IMMR; ulong sccr, dfbrg; - ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf; + ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf; corecnf_t *cp; sccr = immap->im_clkrst.car_sccr; dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; + pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; scmr = immap->im_clkrst.car_scmr; corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT; @@ -243,8 +244,8 @@ cp->vco_div, cp->freq_60x, cp->freq_core); printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, " - "plldf %ld, pllmf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf, - pllmf); + "plldf %ld, pllmf %ld, pcidf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf, + pllmf, pcidf); printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n", gd->vco_out, gd->scc_clk, gd->brg_clk); @@ -253,10 +254,18 @@ gd->cpu_clk, gd->cpm_clk, gd->bus_clk); if (sccr & SCCR_PCI_MODE) { - uint pci_div; + uint pci_div, pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * - ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + if (sccr & SCCR_PCI_MODCK) { + pci_div = 2; + if (pcidf == 9) + pci_div *= 5; + else if (pcidf == 0xB) + pci_div *= 6; + else + pci_div *= (pcidf + 1); + } else + pci_div = pcidf + 1; printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div); } Regards, TEH

2 1

[U-Boot-Users] Patch to fix jffs2's lack of "data crc".
by Rick Bronson 12 Mar '06

12 Mar '06

1. A description of the bug: When jffs2 reads files it crc's the header but not the data. If the data is corrupt it can cause jffs2 to accept a chunk when it shouldn't. My patch adds in code to crc the data. 2. A CHANGELOG entry Add crc of data to jffs2 (in jffs2_1pass_build_lists()).

2 1

[U-Boot-Users] parser problem?
by Andrew Dyer 12 Mar '06

12 Mar '06

I noticed on my board that if I enter a space and then return at the u-boot command line I get an exception. I using u-boot from cvs and the standard (not hush) parser on a mips platform. Does anybody else see this behaviour? -- Hardware, n.: The parts of a computer system that can be kicked.

2 3

[U-Boot-Users] byteorder of image_header_t members?
by Steven Scholz 12 Mar '06

12 Mar '06

Hi there, if uint32_t members of image_header_t are stored in network byteorder, then all references of these members should use ntohl(), right? So should we fix this for instance: #~> grep "\->ih_magic" * cmd_autoscript.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_bootm.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { >>> cmd_bootm.c: if (hdr->ih_magic != IH_MAGIC) { <<< cmd_bootm.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_bootm.c: (ntohl(hdr->ih_magic) != IH_MAGIC)) >>> cmd_doc.c: if (hdr->ih_magic == IH_MAGIC) { <<< >>> cmd_fdc.c: if (hdr->ih_magic != IH_MAGIC) { <<< cmd_fpga.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_ide.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_nand.c: if (ntohl(hdr->ih_magic) == IH_MAGIC) { cmd_scsi.c: if (ntohl(hdr->ih_magic) == IH_MAGIC) { cmd_usb.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { -- Steven

2 4

[U-Boot-Users] PATCH: Switch FADS family boards to new clock mechanism
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch switches MPC86xADS and MPC885ADS boards (FADS family) to new clock control mechanism (clocks are controlled by environment variable). Also, board revision detection is fixed. CHANGELOG - Switch MPC86xADS and MPC885ADS boards to use cpuclk environment variable to set clock -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1