July 2005 - U-Boot

[U-Boot-Users] [PATCH] add OpenGear CM4008 board support
by Greg Ungerer 12 Mar '06

12 Mar '06

Hi All, Attached is a patch that adds support to u-boot for the OpenGear CM4008 8 port console manager board. It is built around the KS8695P CPU, with 8 serial ports, 16MB RAM, and 8MB NOR flash. This patch was originally generated against u-boot 1.1.1. Regards Greg diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/cm4008.c u-boot/board/cm4008/cm4008.c --- u-boot-1.1.1/board/cm4008/cm4008.c 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/cm4008.c 2005-05-04 22:47:00.021931928 +1000 @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2005 + * Greg Ungerer, OpenGear Inc, <greg.ungerer(a)opengear.com> + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris(a)nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/platform.h> + +/* ------------------------------------------------------------------------- */ + +#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) +#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b) + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ +int env_flash_cmdline (void) +{ + unsigned char *sp = (unsigned char *) 0x0201c020; + unsigned char *ep; + int len; + + /* Check if "erase" push button is depressed */ + if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) { + printf("### Entering network recovery mode...\n"); + setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0"); + setenv("bootcmd", "bootp 0x400000; gofsk 0x400000"); + setenv("bootdelay", "2"); + return 0; + } + + /* Check for flash based kernel boot args to use as default */ + for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++) + ; + + if ((len > 0) && (len <1024)) + setenv("bootargs", sp); + + return 0; +} + +int board_late_init (void) +{ + return 0; +} + + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of CM4008 */ + gd->bd->bi_arch_number = 624; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x00000100; + + /* power down all but port 0 on the switch */ + ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005); + ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005); + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/config.mk u-boot/board/cm4008/config.mk --- u-boot-1.1.1/board/cm4008/config.mk 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/config.mk 2005-01-11 00:56:42.000000000 +1000 @@ -0,0 +1 @@ +TEXT_BASE = 0x00f00000 diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/flash.c u-boot/board/cm4008/flash.c --- u-boot-1.1.1/board/cm4008/flash.c 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/flash.c 2005-01-17 00:55:13.000000000 +1000 @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2005 + * Greg Ungerer, OpenGear Inc, greg.ungerer(a)opengear.com + * + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris(a)nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/byteorder/swab.h> + + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (unsigned char * addr, flash_info_t * info); +static int write_data (flash_info_t * info, ulong dest, unsigned char data); +static void flash_get_offsets (ulong base, flash_info_t * info); +void inline spin_wheel (void); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + int i; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + switch (i) { + case 0: + flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); + break; + case 1: + /* ignore for now */ + flash_info[i].flash_id = FLASH_UNKNOWN; + break; + default: + panic ("configured too many flash banks!\n"); + break; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + _bss_start - _armboot_start, + &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) + return; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (unsigned char * addr, flash_info_t * info) +{ + volatile unsigned char value; + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = 0xAA; + addr[0x2AAA] = 0x55; + addr[0x5555] = 0x90; + + mb (); + value = addr[0]; + + switch (value) { + + case (unsigned char)INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = 0xFF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[2]; /* device ID */ + + switch (value) { + + case (unsigned char)INTEL_ID_28F640J3A: + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 0x00800000; + break; /* => 8 MB */ + + case (unsigned char)INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000; + break; /* => 16 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = 0xFF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + else + printf ("\n"); + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + volatile unsigned char *addr; + unsigned char status; + + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + addr = (volatile unsigned char *) (info->start[sect]); + *addr = 0x50; /* clear status register */ + *addr = 0x20; /* erase setup */ + *addr = 0xD0; /* erase confirm */ + + while (((status = *addr) & 0x80) != 0x80) { + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = 0xB0; /* suspend erase */ + *addr = 0xFF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = 0x50; /* clear status register cmd */ + *addr = 0xFF; /* resest to read mode */ + + printf (" done\n"); + } + } + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp; + unsigned char data; + int count, i, l, rc, port_width; + + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + wp = addr; + port_width = 1; + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, data)) != 0) { + return (rc); + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, data)) != 0) { + return (rc); + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (); + count = 0; + } + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_data (info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t * info, ulong dest, unsigned char data) +{ + volatile unsigned char *addr = (volatile unsigned char *) dest; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = 0x40; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & 0x80) != 0x80) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = 0xFF; /* restore read mode */ + return (1); + } + } + + *addr = 0xFF; /* restore read mode */ + + return (0); +} + +void inline spin_wheel (void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf ("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/Makefile u-boot/board/cm4008/Makefile --- u-boot-1.1.1/board/cm4008/Makefile 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/Makefile 2004-11-02 00:38:51.000000000 +1000 @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000, 2002 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := cm4008.o flash.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/u-boot.lds u-boot/board/cm4008/u-boot.lds --- u-boot-1.1.1/board/cm4008/u-boot.lds 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/u-boot.lds 2004-11-05 00:27:11.000000000 +1000 @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/ks8695/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -Naur --exclude=CVS u-boot-1.1.1/include/configs/cm4008.h u-boot/include/configs/cm4008.h --- u-boot-1.1.1/include/configs/cm4008.h 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/include/configs/cm4008.h 2005-03-20 22:31:27.000000000 +1000 @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004 + * Greg Ungerer <greg.ungerer(a)opengear.com>. + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ +#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CFG_ENV_IS_NOWHERE +#define CONFIG_SERIAL1 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> +#undef CONFIG_COMMANDS +#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" +#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00800000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00008000 /* default load address */ + +#define CFG_HZ (1000) /* 1ms resolution ticks */ + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ + +#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ + +#endif /* __CONFIG_H */ diff -Naur --exclude=CVS u-boot-1.1.1/Makefile u-boot/Makefile --- u-boot-1.1.1/Makefile 2004-04-25 09:23:30.000000000 +1000 +++ u-boot/Makefile 2005-03-12 23:06:59.000000000 +1000 @@ -1040,6 +1040,11 @@ VCMA9_config : unconfig @./mkconfig $(@:_config=) arm arm920t vcma9 mpl +cm4008_config : unconfig + @./mkconfig $(@:_config=) arm ks8695 cm4008 + +cm41xx_config : unconfig + @./mkconfig $(@:_config=) arm ks8695 cm41xx ######################################################################### ## S3C44B0 Systems

2 16

[U-Boot-Users] [PATCH] revised word alignment fixes for word aligned NS16550 UART
by jean-paul.saman＠philips.com 12 Mar '06

12 Mar '06

The patch is created against current CVS 2005 march 1st and fixes problems for boards that only have word access to the NS16550 UART. OBSOLETES: From: Jean-Paul Saman Date: 23-02-2005 Subject: [PATCH] word alignment fixes for word aligned NS16550 UART peripheral CHANGELOG: * Patch by Jean-Paul Saman, 23 Feb 2005 - include/ns16550.h Fixes alignement bug with UART that only supports word aligned access: removed "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" GCC generates bytes access when it encounters the packed attribute regardless if the struct is already word aligned for a platform. Peripherals that can only handle word aligned access won't work properly when accessed with byte access. The struct NS16550 is already word aligned for REG_SIZE = 4, so there is no need to packed the struct in that case. Kind greetings, Jean-Paul Saman Philips Semiconductors CTO/RTG Philips HighTech Campus, building WDB 3.29 Professor van den Holstlaan 4 5655 AA Eindhoven tel: +31 (0)40 27 45131

2 1

[U-Boot-Users] Suspect behaiviour if gatewayip not set
by Robin Gilks 12 Mar '06

12 Mar '06

Greetings Having played with netconsole a bit, I've observed that the current behaiviour of warning if gatewayip is not set and then using its value of zero when talking to outside the current subnet is somewhat suspect. The particular case of netconsole means that no error message is evident - it is trying to be sent the error down the ethernet connection that is being initiated with an arp(0.0.0.0)! I propose that the warning message stay but the target address is put into the arp so that a proxying router can reply to it rather then send out a nonsense arp request. CHANGELOGg: * Patch by Robin Gilks 23 December 2004 net.c - if gatewayip not set send arp request for destination IP not zero --- net.c.old 2004-10-26 12:46:58.000000000 +1300 +++ net.c 2004-12-23 09:42:46.000000000 +1300 @@ -207,8 +207,10 @@ (NetOurIP & NetOurSubnetMask)) { if (NetOurGatewayIP == 0) { puts ("## Warning: gatewayip needed but not set\n"); + NetArpWaitReplyIP = NetArpWaitPacketIP; + } else { + NetArpWaitReplyIP = NetOurGatewayIP; } - NetArpWaitReplyIP = NetOurGatewayIP; } else { NetArpWaitReplyIP = NetArpWaitPacketIP; } -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks(a)tait.co.nz New Zealand ======================================================================= This email, including any attachments, is only for the intended addressee. It is subject to copyright, is confidential and may be the subject of legal or other privilege, none of which is waived or lost by reason of this transmission. If the receiver is not the intended addressee, please accept our apologies, notify us by return, delete all copies and perform no other act on the email. Unfortunately, we cannot warrant that the email has not been altered or corrupted during transmission. =======================================================================

2 1

[U-Boot-Users] PATCH for drivers/cfi_flash.c
by Tolunay Orkun 28 Feb '06

28 Feb '06

This patch reworks the patch submitted on May 6, 2005: Ref: http://sourceforge.net/mailarchive/message.php?msg_id=11674386 This patch (cfi_flash.patch.tolunay) is prepared against current CVS version + Peter Pearse Patch dated March 15, 2005. Ref: http://sourceforge.net/mailarchive/message.php?msg_id=11164812 CHANGELOG: * Patch by Tolunay Orkun, 02 July 2005: Fixes for drivers/cfi_flash.c: - Fix wrong timeout value usage in flash_status_check() - Round write_tout up when converting to msec in flash_get_size() - Remove clearing flash status at the end of flash_write_cfibuffer() which sets Intel 28F640J3 flash back to command mode on CSB472 ~~~ In case Peter's Patch is rejected for some reason please apply the alternate patch (cfi_flash.patch.tolunay2) instead. It makes one additional fix that I had submitted in my original patch. CHANGELOG (Alternate) * Patch by Tolunay Orkun, 02 July 2005: Fixes for drivers/cfi_flash.c: - Fix wrong timeout value usage in flash_status_check() - Round write_tout up when converting to msec in flash_get_size() - Remove clearing flash status at the end of flash_write_cfibuffer() which sets Intel 28F640J3 flash back to command mode on CSB472 - Fix incorrect if condition in flash_full_status_check() Best regards, Tolunay Orkun Index: drivers/cfi_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/cfi_flash.c,v retrieving revision 1.18 diff -p -u -r1.18 cfi_flash.c --- drivers/cfi_flash.c 16 May 2005 15:23:24 -0000 1.18 +++ drivers/cfi_flash.c 2 Jul 2005 23:45:50 -0000 @@ -694,7 +694,7 @@ static int flash_status_check (flash_inf /* Wait for command completion */ start = get_timer (0); while (flash_is_busy (info, sector)) { - if (get_timer (start) > info->erase_blk_tout * CFG_HZ) { + if (get_timer (start) > tout) { printf ("Flash %s timeout at address %lx data %lx\n", prompt, info->start[sector], flash_read_long (info, sector, 0)); @@ -1113,8 +1113,9 @@ static ulong flash_get_size (ulong base, info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); info->buffer_write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT))) / 1000; + tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) * + (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT)); + info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ info->flash_id = FLASH_MAN_CFI; if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) { info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */ @@ -1281,7 +1282,6 @@ static int flash_write_cfibuffer (flash_ info->buffer_write_tout, "buffer write"); } - flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; } #endif /* CFG_FLASH_USE_BUFFER_WRITE */ Index: drivers/cfi_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/cfi_flash.c,v retrieving revision 1.18 diff -p -u -r1.18 cfi_flash.c --- drivers/cfi_flash.c 16 May 2005 15:23:24 -0000 1.18 +++ drivers/cfi_flash.c 2 Jul 2005 23:52:15 -0000 @@ -694,7 +694,7 @@ static int flash_status_check (flash_inf /* Wait for command completion */ start = get_timer (0); while (flash_is_busy (info, sector)) { - if (get_timer (start) > info->erase_blk_tout * CFG_HZ) { + if (get_timer (start) > tout) { printf ("Flash %s timeout at address %lx data %lx\n", prompt, info->start[sector], flash_read_long (info, sector, 0)); @@ -719,7 +719,7 @@ static int flash_full_status_check (flas case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: if ((retcode != ERR_OK) - && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { + || !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf ("Flash %s error at address %lx\n", prompt, info->start[sector]); @@ -1113,8 +1113,9 @@ static ulong flash_get_size (ulong base, info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); info->buffer_write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT))) / 1000; + tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) * + (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT)); + info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ info->flash_id = FLASH_MAN_CFI; if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) { info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */ @@ -1281,7 +1282,6 @@ static int flash_write_cfibuffer (flash_ info->buffer_write_tout, "buffer write"); } - flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; } #endif /* CFG_FLASH_USE_BUFFER_WRITE */

2 1

[U-Boot-Users] cfi_flash.c patch
by richard＠uclinux.net 28 Feb '06

28 Feb '06

Afternoon... Adding 2 spaces in cfi_flash.c makes the output of "flinfo" much more readable if there are protected and unprotected sectors: rick ---------------------------------------------------------------------------- CHANGELOG: * Patch by Richard Klingler, 09 Apr 2005: correct column layout of flinfo output. --- u-boot.orig/drivers/cfi_flash.c 2005-01-09 19:12:33.000000000 +0200 +++ u-boot/drivers/cfi_flash.c 2005-04-09 16:35:04.000000000 +0300 @@ -483,7 +483,7 @@ void flash_print_info (flash_info_t * in if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO) " : " "); + info->start[i], info->protect[i] ? " (RO) " : " "); #endif } putc ('\n');

3 3

[U-Boot-Users] PATCH: minor bugs fix in cfi_driver.c
by Pierre AUBERT 28 Feb '06

28 Feb '06

Please find attached a little patch against current CVS. CHANGELOG: * Patch by Pierre Aubert 09 Dec 2004 - Fix flash information strings alignement in cfi_driver.c - Fix monitor size for flash protection in cfi_driver.c Best regards diff -pur u-boot/drivers/cfi_flash.c u-boot-paub/drivers/cfi_flash.c --- u-boot/drivers/cfi_flash.c 2004-10-11 01:27:35.000000000 +0200 +++ u-boot-paub/drivers/cfi_flash.c 2004-12-09 10:11:31.000000000 +0100 @@ -334,7 +334,7 @@ unsigned long flash_init (void) #if (CFG_MONITOR_BASE >= CFG_FLASH_BASE) flash_protect (FLAG_PROTECT_SET, CFG_MONITOR_BASE, - CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); #endif @@ -477,7 +477,7 @@ void flash_print_info (flash_info_t * in if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO) " : " "); + info->start[i], info->protect[i] ? " (RO)" : " "); #endif } putc ('\n');

2 1

[U-Boot-Users] Error: start address not on sector boundary
by HS8JCV 14 Oct '05

14 Oct '05

Hi all I complie new u-boot for Flash SST39VF3201. It complete and can boot with u-boot. Follow that. boot 1.0 (Nov 25 2003 - 23:08:05) Uncompressing image... U-Boot 1.1.2 (Jun 25 2005 - 22:30:04) U-Boot code: 21F00000 -> 21F16F88 BSS: -> 21F1B640 RAM Configuration: Bank #0: 20000000 32 MB SST: SST39VF3201 (32Mbit) Flash: 4 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial U-Boot> after I setenv and saveenv It reponse "Error: start address not on sector boundary". U-Boot> setenv ethaddr 12:34:56:78:99:22 U-Boot> saveenv Saving Environment to Flash... Error: start address not on sector boundary and Flash Organizations follow this code. OrgDef OrgSST39VF3201[] = { { 1,16*1024 }, /* 1 * 16 kBytes sectors */ { 2,8*1024 }, /* 2 * 8 kBytes sectors */ { 1,32*1024 }, /* 1 * 32 kBytes sectors */ { 63,64*1024 }, /* 31 * 64 kBytes sectors */ }; Why it show error.? How to resolve this error.? Best Regard Supparerk

3 2

[U-Boot-Users] i.MX support for scb9328 cleaned up
by Konstantin Kletschke 12 Oct '05

12 Oct '05

I cleaned up board support for the scb9328 board. I did changes to the scb9328.h, it is very much more readable more. Many timings have been tuned, the system is much faster now. Also the board/scb9328/flash.c is removed, the patch will delete it! The cfi_flash.c is used now. If anybody is interested, it is at http://www.ludenkalle.de/u-boot-1.1.2-imx1/u-boot-1.1.2-imx1.diff It contains the code unlocking intel k3 devices. splitdiff output is at http://www.ludenkalle.de/u-boot-1.1.2-imx1/u-boot-1.1.2_* (directory viewing on http://www.ludenkalle.de/u-boot-1.1.2-imx1/ is allowed). May be I could get advice what still looks odd so I can fix it, so the stuff could be apllied. Or it can be applied as is... Regards, Konsti -- GPG KeyID EF62FCEF Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF

3 12

[U-Boot-Users] (no subject)
by Andy Fleming 09 Oct '05

09 Oct '05

Here's a patch which puts the PHYs for the 3rd and 4th eTSECS into RGMII mode on the 8548 CDS.

2 1

[U-Boot-Users] NS7520 processor support patch
by Arthur Shipkowski 09 Oct '05

09 Oct '05

This patch adds support for the NS7520 processor as CONFIG_NETARM_NS7520. The patch adds its support to the current Net+ARM related files when possible. The sole exception is the Ethernet driver, because the Ethernet support is not like that on the prior Net+ARM parts nor like that on the NS9750. This patch has been tested against current CVS with MAKEALL arm. CHANGELOG: * Patch by Art Shipkowski, 12 May 2005: Implemented support for the NetSilicon NS7520 processor. Art Shipkowski Videon Central Software Engineer (814)235-1111 x307 art(a)videon-central.com

2 1