July 2005 - U-Boot

[U-Boot-Users] common/cmd_mii.c bug and patch
by Andrew Dyer 24 Sep '05

24 Sep '05

The mii info command (the !CONFIG_TERSE_MII version) has a bug in current cvs. If the phy address is passed to the command the code assigns the variable addr to start, instead of the values of addrlo which is extracted from the command line. At that point in the code addr is always 0. to demonstrate find a board with a phy at a non-zero address, compare the results of 'mii info' and mii info 1' (substitute the phy address on the test board for 1). Also in this file on lines 55 and 418 there are two places where a call to mii_init() is conditionally compiled in, but one condition includes defined(CONFIG_MCF52x2) and the other doesn't. Is this intentional? -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] debugging U-boot with GDB on a Au1550
by Cliff Brake 22 Aug '05

22 Aug '05

I have U-boot running on a Au1550 platform. I have verified that re-location to RAM works but the system is crashing somewhere in board_init_r. I would like to debug this with GDB and a BDI2000, but am running into a few issues. U-boot for this platform is linked to 0xbfc00000 (the ROM reset vector). This is not what I am used to as most ARM platforms are linked to the RAM location. After U-boot is relocated to RAM, how do I tell GDB what the new link address is (0x80fdc000 in this case)? Thanks, Cliff -- ======================= Cliff Brake http://bec-systems.com

2 3

[U-Boot-Users] [PATCH] Fix JFFS2 command return values
by Andreas Engel 16 Aug '05

16 Aug '05

CHANGELOG entry: * Patch by Andreas Engel, 15 July 2005 fixed return values of the jffs2 commands so we can use them to, e.g., check the existence of a file with "if ls foo; then this; else that; fi" in the hush shell

2 3

[U-Boot-Users] PATCH: Add sandburst metrobox board support [2/3]
by Travis B. Sawyer 15 Aug '05

15 Aug '05

[Note: My previous submission was rejected due to size] This patch adds the Sandburst Metrobox and Sandburst Karef Boards. Both are PPC440GX based, direct peripheral bus connected compact flash, dallas rtc, write protected eeprom (strappings and ethernet MAC address). EMAC 2 is the management ethernet interface, EMAC 3 goes to a board to board connector. These boards are reference designs for the Sandburst HiBEAM chipset. See http://www.sandburst.com for more board information (predominately marketing speak). This patch is against source forge cvs 12July2005, at approximately 0900 EDT. CHANGELOG: * Patch by Travis B. Sawyer, 12 Jul 2005: Add Sandburst Metrobox and Sandburst Karef board support packages. Second serial port on 440GX now defined as a system device. Add 'Short Etch' code for Cicada PHY within 440gx_enet.c Best regards, Travis Sawyer

2 1

[U-Boot-Users] PATCH: Add sandburst metrobox board support [1/3]
by Travis B. Sawyer 15 Aug '05

15 Aug '05

[Note: My previous submission was rejected due to size] This patch adds the Sandburst Metrobox and Sandburst Karef Boards. Both are PPC440GX based, direct peripheral bus connected compact flash, dallas rtc, write protected eeprom (strappings and ethernet MAC address). EMAC 2 is the management ethernet interface, EMAC 3 goes to a board to board connector. These boards are reference designs for the Sandburst HiBEAM chipset. See http://www.sandburst.com for more board information (predominately marketing speak). This patch is against source forge cvs 12July2005, at approximately 0900 EDT. CHANGELOG: * Patch by Travis B. Sawyer, 12 Jul 2005: Add Sandburst Metrobox and Sandburst Karef board support packages. Second serial port on 440GX now defined as a system device. Add 'Short Etch' code for Cicada PHY within 440gx_enet.c Best regards, Travis Sawyer

2 1

[U-Boot-Users] PATCH: Add Sandburst board support packages [2/2]
by Travis B. Sawyer 15 Aug '05

15 Aug '05

Patch to add me as the maintainer for the Sandburst Metrobox and Karef boards. CHANGELOG: * Patch by Travis B. Sawyer, 12Jul2005: Update Maintainers file for Metrobox and karef boards. Best Regards, Travis Sawyer

2 1

[U-Boot-Users] PATCH: Fix ppc 440 timer freq.
by Travis B. Sawyer 15 Aug '05

15 Aug '05

This patch fixes 440 timer frequency (move from 10ms to 1 ms), as found by Andrew Wozniak. Changelog * Patch by Travis Sawyer, 05 Apr 2005: - Change timer frequency for ppc 440 from 10 ms to 1 ms. Problem found by Andrew Wozniak. Andy, thank you for pointing this out. Best Regards, Travis diff -purN u-boot/cpu/ppc4xx/interrupts.c u-boot_modified/cpu/ppc4xx/interrupts.c --- u-boot/cpu/ppc4xx/interrupts.c 2004-03-14 10:20:56.000000000 -0500 +++ u-boot_modified/cpu/ppc4xx/interrupts.c 2005-04-05 19:56:27.793079640 -0400 @@ -134,7 +134,7 @@ int interrupt_init_cpu (unsigned *decrem mtspr( dec, 0 ); /* Prevent exception after TSR clear*/ mtspr( decar, 0 ); /* clear reload */ mtspr( tsr, 0x08000000 ); /* clear DEC status */ - val = gd->bd->bi_intfreq/100; /* 10 msec */ + val = gd->bd->bi_intfreq/1000; /* 1 msec */ mtspr( decar, val ); /* Set auto-reload value */ mtspr( dec, val ); /* Set inital val */ #else

2 1

[U-Boot-Users] Building u-boot for Ocotea fails...
by Gerhard Jaeger 15 Aug '05

15 Aug '05

Hi, while trying to build a u-boot image for Ocotea out of the latest CVS, I noticed the following problem: ppc_4xx-ld: section .bss [fffeeb00 -> fffffec7] overlaps section .bootpg [fffff000 -> fffff21b] This one should be solved, either by reducing the command set (i.e. removing CFG_CMD_BEDBUG) or increasing the size back to 512k, as it was before the latest changes took place... TIA, Gerhard -- Gerhard Jaeger <gjaeger(a)sysgo.com> SYSGO AG Embedded and Real-Time Software www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de

2 2

[U-Boot-Users] [PATCH] support for CF/IDE on PCMCIA for PXA25X
by Christian Pell 13 Aug '05

13 Aug '05

Hi, I tried this with some different CFs with FAT file-systems on them. There is a README in the patch itself that goes in documentation directory. Bye, -- Christian Pellegrin <chri(a)ascensit.com>, <c.pellegrin(a)eurotech.it>, <chri(a)infis.univ.ts.it>, <c.pellegrin(a)exadron.com>

4 8

[U-Boot-Users] [PATCH] make bootretry work with the hush shell
by Andreas Engel 12 Aug '05

12 Aug '05

CHANGELOG entry: * Patch by Andreas Engel, 19 July 2005 make the bootretry feature work with the hush shell. Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set too Regards, Andreas Engel

2 1

[U-Boot-Users] [PATCH] update to "tools/bddb"
by Murray.Jensen＠csiro.au 12 Aug '05

12 Aug '05

This patch contains an update to the php code in "tools/bddb". I doubt anyone is actually using this code, but its a good reference, and besides if it isn't going to be kept up-to-date, it should be removed. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen, July 1, 2005: - update for Hymod Board Database PHP code in "tools" directory Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] make use of "tr" posix compliant, and export HOSTOS var
by Murray.Jensen＠csiro.au 12 Aug '05

12 Aug '05

This patch makes the use of the "tr" command posix compliant when setting the HOSTOS make variable, and also exports this variable for use in sub-makes (I needed to access to HOSTOS in my board "config.mk" fragment). Cheers! Murray... -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] change my email address
by Murray.Jensen＠csiro.au 12 Aug '05

12 Aug '05

This patch changes my email address in all files where it appears. Cheers! Murray... -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] Patch PHY Reset (needed for Marvell 88E1111)
by Carl Riechers 12 Aug '05

12 Aug '05

Attached is a patch that preserved the contents of PHY_BMCR during a soft reset by only setting the reset bit. This allows the PHY strapping to be preserved. The patch also include an enhancement that allows overiding of the miiphy_speed and miiphy_duplex functions when RGMII is used without PHYs for proper MAC configuration. Regards, Carl Riechers ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com --- u-boot/common/miiphyutil.c 2005-06-24 14:02:18.457551500 -0500 +++ u-boot/common/miiphyutil.c 2005-06-24 14:03:17.000000000 -0500 @@ -29,6 +29,14 @@ #include <common.h> #include <miiphy.h> +/* undefine functions that may have been renamed for a specific board */ +#ifdef miiphy_speed +#undef miiphy_speed +#endif +#ifdef miiphy_duplex +#undef miiphy_duplex +#endif + #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) /***************************************************************************** @@ -93,7 +101,13 @@ int miiphy_reset (unsigned char addr) unsigned short reg; int loop_cnt; - if (miiphy_write (addr, PHY_BMCR, 0x8000) != 0) { + if (miiphy_read (addr, PHY_BMCR, &reg) != 0) { +#ifdef DEBUG + printf ("PHY status read failed\n"); +#endif + return (-1); + } + if (miiphy_write (addr, PHY_BMCR, reg | 0x8000) != 0) { #ifdef DEBUG puts ("PHY reset failed\n"); #endif

2 1

[U-Boot-Users] Patches for ARM IntegratorCP, ARM926EJS, and ARM946ES
by Shawn Jin 12 Aug '05

12 Aug '05

Hi, The patches were developed on an ARM IntegratorCP board with ARM946ES. Since the majority code of ARM946ES cpu was copied from ARM926EJS and there was bug about CFG_HZ found in ARM946ES later, I also fixed this CFG_HZ error on ARM926EJS. The major changes are 1. Mulitple core modules support (u-boot.multicm.patch) Following OMAP boards' methodology, I added mulitple core module configuration. For example, integratorcp_946es_config is for IntegratorCP board with ARM946ES, integratorcp_config is for IntegratorCP board with ARM926EJS by default, integratorap_946es_config is for IntegratorAP board with ARM946ES, and integratorap_config is for IntegratorAP with ARM926EJS. Now only two core modules are supported, ARM946ES and ARM926EJS. 2. ARM946ES support (u-boot.arm946es.patch) 3. ARM926EJS bug fix (u-boot.arm926ejs.patch) Fixed CFG_HZ problem. Set CFG_HZ to 1000. The solution is from AT91RM9200. 4. IntegratorCP bug fixes (u-boot.integratorcp.patch) Added SDRAM size information and FLASH support. Philippe, I don't have an ARM926EJS core module. Would you please test the CFG_HZ fix on your system? Thanks. Regards, -Shawn.

3 6

[U-Boot-Users] [PATCH] VoiceBlue update
by Ladislav Michl 12 Aug '05

12 Aug '05

Hi Wolfgang, please consider applying this board specific patch. You may find some updated trivial patches I sent to mailing list here: ftp://ftp.linux-mips.org/pub/linux/mips/people/ladis/u-boot/ CHANGELOG * Patch by Ladislav Michl, 23 May 2005: VoiceBlue update: eeprom tool can also store firmware version now. eeprom.bin is runable by jumping at load address. Index: board/voiceblue/Makefile =================================================================== RCS file: /cvsroot/u-boot/u-boot/board/voiceblue/Makefile,v retrieving revision 1.1 diff -u -r1.1 Makefile --- board/voiceblue/Makefile 5 Apr 2005 23:32:24 -0000 1.1 +++ board/voiceblue/Makefile 23 May 2005 07:52:32 -0000 @@ -32,21 +32,23 @@ gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) LOAD_ADDR = 0x10400000 +LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds all: $(LIB) eeprom.srec eeprom.bin $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) -eeprom.srec: eeprom.o - $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ \ +eeprom.srec: eeprom.o eeprom_start.o + $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ + -o $(<:.o=) -e $(<:.o=) $^ \ -L../../examples -lstubs \ -L../../lib_generic -lgeneric \ -L$(gcclibdir) -lgcc $(OBJCOPY) -O srec $(<:.o=) $@ eeprom.bin: eeprom.srec - $(OBJCOPY) -O binary $< $@ 2>/dev/null + $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null clean: rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin Index: board/voiceblue/eeprom.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/board/voiceblue/eeprom.c,v retrieving revision 1.1 diff -u -r1.1 eeprom.c --- board/voiceblue/eeprom.c 5 Apr 2005 23:32:24 -0000 1.1 +++ board/voiceblue/eeprom.c 23 May 2005 07:52:32 -0000 @@ -30,40 +30,6 @@ #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE -static int verify_macaddr(char *); -static int set_mac(char *); - -int eeprom(int argc, char *argv[]) -{ - app_startup(argv); - if (get_version() != XF_VERSION) { - printf("Wrong XF_VERSION.\n"); - printf("Application expects ABI version %d\n", XF_VERSION); - printf("Actual U-Boot ABI version %d\n", (int)get_version()); - return 1; - } - - if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { - printf("SMSC91111 not found.\n"); - return 2; - } - - if (argc != 2) { - printf("VoiceBlue EEPROM writer\n"); - printf("Built: %s at %s\n", __DATE__ , __TIME__ ); - printf("Usage:\n\t<mac_address>"); - return 3; - } - - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { - printf("*** ERROR ***\n"); - return 4; - } - - return 0; -} - static u16 read_eeprom_reg(u16 reg) { int timeout; @@ -106,17 +72,28 @@ return 1; } +static int write_data(u16 *buf, int len) +{ + u16 reg = 0x23; + + while (len--) + write_eeprom_reg(*buf++, reg++); + + return 0; +} + static int verify_macaddr(char *s) { u16 reg; int i, err = 0; - printf("Verifying MAC Address: "); + printf("MAC Address: "); err = i = 0; for (i = 0; i < 3; i++) { reg = read_eeprom_reg(0x20 + i); printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); - err |= reg != ((u16 *)s)[i]; + if (s) + err |= reg != ((u16 *)s)[i]; } return err ? 0 : 1; @@ -138,3 +115,98 @@ return 0; } + +static int parse_element(char *s, unsigned char *buf, int len) +{ + int cnt; + char *p, num[3]; + unsigned char id; + + id = simple_strtoul(s, &p, 16); + if (*p++ != ':') + return -1; + cnt = 2; + num[2] = 0; + for (; *p; p += 2) { + if (p[1] == 0) + return -2; + if (cnt + 3 > len) + return -3; + num[0] = p[0]; + num[1] = p[1]; + buf[cnt++] = simple_strtoul(num, NULL, 16); + } + buf[0] = id; + buf[1] = cnt - 2; + + return cnt; +} + +int eeprom(int argc, char *argv[]) +{ + int i, len, ret; + unsigned char buf[58], *p; + + app_startup(argv); + if (get_version() != XF_VERSION) { + printf("Wrong XF_VERSION.\n"); + printf("Application expects ABI version %d\n", XF_VERSION); + printf("Actual U-Boot ABI version %d\n", (int)get_version()); + return 1; + } + + if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + printf("SMSC91111 not found.\n"); + return 2; + } + + /* Called without parameters - print MAC address */ + if (argc < 2) { + verify_macaddr(NULL); + return 0; + } + + /* Print help message */ + if (argv[1][1] == 'h') { + printf("VoiceBlue EEPROM writer\n"); + printf("Built: %s at %s\n", __DATE__ , __TIME__ ); + printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n"); + return 0; + } + + /* Try to parse information elements */ + len = sizeof(buf); + p = buf; + for (i = 2; i < argc; i++) { + ret = parse_element(argv[i], p, len); + switch (ret) { + case -1: + printf("Element %d: malformed\n", i - 1); + return 3; + case -2: + printf("Element %d: odd character count\n", i - 1); + return 3; + case -3: + printf("Out of EEPROM memory\n"); + return 3; + default: + p += ret; + len -= ret; + } + } + + /* First argument (MAC) is mandatory */ + set_mac(argv[1]); + if (verify_macaddr(argv[1])) { + printf("*** MAC address does not match! ***\n"); + return 4; + } + + while (len--) + *p++ = 0; + + write_data((u16 *)buf, sizeof(buf) >> 1); + + return 0; +} + --- /dev/null 2005-05-23 10:45:10.477452184 +0200 +++ board/voiceblue/eeprom.lds 2005-05-17 09:29:35.000000000 +0200 @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * (C) Copyright 2005 + * Ladislav Michl, 2N Telekomunikace, <michl(a)2n.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = ALIGN(4); + .text : + { + eeprom_start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} --- /dev/null 2005-05-23 10:45:10.477452184 +0200 +++ board/voiceblue/eeprom_start.S 2005-05-17 09:34:11.000000000 +0200 @@ -0,0 +1,12 @@ +/* + * Copyright (c) 2005 2N Telekomunikace + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +.globl _start +_start: b eeprom +

2 1

[U-Boot-Users] Minor cleanup
by Anders Larsen 12 Aug '05

12 Aug '05

Hi, Rick Bronson and the AT91RM9200DK is listed under PPC Systems. Since the AT91RM9200 is an ARM SoC, the attached patch against current top of CVS moves the entry to the appropriate position. Changelog: Move the AT91RM9200DK to the ARM Systems list. Cheers Anders

2 1

[U-Boot-Users] Eliminate calls of _divsi3 on ARM
by Anders Larsen 12 Aug '05

12 Aug '05

Hi, the enclosed patch agains current top of CVS eliminates two calls of the libgcc helper function _divsi3 and _modsi3. Rationale: Certain commercially available tool-chains provides b0rken libgcc.a (compiled with hardware FP) making these helper functions unusable (U-Boot already provides the unsigned counterparts in lib_arm/libarm.a). Changelog: Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3 Cheers Anders

3 4

[U-Boot-Users] UBoot cvs compile error.
by Bryan O'Donoghue 12 Aug '05

12 Aug '05

make Adder_config edit config.mk uncomment -DDEBUG fails to resolve measure_gclk Changing cpu/mpc8xx/speed.c #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) to #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK)\ || defined(DEBUG) fixes. -- Best regards Bryan

2 1

[U-Boot-Users] Switch between PlanetCore and U-Boot freely
by Sam Song 08 Aug '05

08 Aug '05

Hi all, Well, somebody was trying to pull the cat out of my bag. Here it is:-) ------------------------------------------------- After several heart-struck failure, I got one workable way to program each other in FLASH between PlanetCore and U-Boot. Hardware Platform : RPXlite DW(EP 823 H1 DW) 1. From U-Boot to PlanetCore Utilities : PlanetCore Boot Loader - PCL200.mot [root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot PCL200.mot pcl200.bin [Target Operation] u-boot>t 100000 pcl200.bin u-boot>go 0x100000 ## Starting application at 0x00100000 ... MPC8xx PlanetCore Flash Burner v2.00 Copyright 2001 Embedded Planet. All rights reserved. Construct Flash Device.....done. Program MPC8xx PlanetCore Boot Loader v2.00 Built Sep 19, 2001 at 14:34:42 Image located from FC000000 to FC01B5D1. (Skipping an image, only loading low boot image) Low boot board detected, skipping high boot image. Erasing, programming and verifying will start in 20 seconds Press P to start immediately or ESC to cancel Press Space or Enter for more options. .............. Erasing Programming FLASH programmed successfully! Press R to induce a hard reset MPC8xx PlanetCore Boot Loader v2.00 Copyright 2001 Embedded Planet. All rights reserved. DRAM available size = 64 MB wvCV DRAM OK > 2. From PlanetCore to U-Boot Utilities : PlanetCore FLASH Burner - PCB200.mot Use Flash Burner to finish the work: First, TFTP the U-Boot image file to RAM; For example, RPXlite_DW.bin to 0x400000 Second, TFTP FLASH Burner to RAM; For example, 0x100000 Third, run the FLASH Burner and Program the U-Boot image into the correct location in FLASH. [Target Operation] MPC8xx PlanetCore Boot Loader v2.00 Copyright 2001 Embedded Planet. All rights reserved. DRAM available size = 64 MB wvCV DRAM OK >t Load using tftp via Ethernet Enter server IP address <172.16.115.6> : Enter server filename <PCL200.mot> : RPXlite_DW.bin Enter (B)inary or (S)record input mode <S> : B Enter address offset : <00400000 hex> : Total bytes = 120096 in 232184 uSecs Loaded addresses 00400000 through 0041D51F. Start address = 00400000 >t Load using tftp via Ethernet Enter server IP address <172.16.115.6> : Enter server filename <RPXlite_DW.bin> : PCB200.mot Enter (B)inary or (S)record input mode <B> : S Enter address offset : <00000000 hex> : .512.1024..2048....4096..... Total bytes = 326280 in 2570249 uSecs Loaded addresses 00100000 through 0011BB51. Start address = 00100000 >go [Go 00100000] MPC8xx PlanetCore Flash Burner v2.00 Copyright 2001 Embedded Planet. All rights reserved. Construct Flash Device.....done. Bad start address Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length = 0xFFFFFFFF Forcing Menu Interface h[elp] Show commands. c[ode] Show information on code to be loaded. di[splay] Display all flash sections. du[mp] Dump memory. d ? for more info. e[rase] Erase flash sections. f[ill] Fill flash sections. im[age] Toggle load high, low, or both flash images. in[fo] Show flash information. ma[p] Show memory map. mo[dify] Modify memory. m ? for more info. p[rogram] Erase, program, and verify now. reset Restart the loader. s[how] Show flash sections to erase and program. t[est] Test flash sections. q[uit] Quit without programming. #program 400000 ff000000 1D51F doProgram( 400000 ff000000 1D51F ) Start = 0x00400000, target = 0xFF000000, length = 0x0001D51F Erasing sector 0xFF000000, length 0x008000. Erasing sector 0xFF008000, length 0x008000. Erasing sector 0xFF010000, length 0x008000. Erasing sector 0xFF018000, length 0x008000. Programming FF000000 through FF01D51E FLASH programmed successfully! Press R to induce a hard reset Forcing Hard Reset by MachineCheck and ResetOnCheckstop... U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache Board: RPXlite_DW DRAM: 64 MB FLASH: 16 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: SCC ETHERNET u-boot> ------------------------------------------------- Well, sometimes network function of PlanetCore couldn't work when switching from U-Boot to PlanetCore. For example, you couldn't download a file from HOST PC via TFTP. Don't worry, just restart your HOST PC and everything would work as smooth as clockwork. I don't know the reason WHY:-) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Merry Christmas and Happy New Year! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ===== Best regards, Sam _________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_…

2 3

[U-Boot-Users] [patch]fixes for cmd_fpga.c
by Andrew Dyer 08 Aug '05

08 Aug '05

The attached patch: 1) fixes a bug with the 'fpga loadb' command The bug is in calculating the config data size - 4 bytes of length info were being read as signed chars, casted to long, shifted and added. The cast to long was doing sign extension and causing an incorrect result if a byte was greater than 0x80. For me this caused the fpga load to end early and time out waiting for the hardware completion. 2) removes compilation warnings about using __FUNCTION__ concatenated with strings 3) changes the fpga loadb to always print the file header info during a load. I realize this patch is a mishmash - hopefully it's helpful to someone. -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] [PATCH] Fix SystemACE CF access errors
by Jeff Angielski 07 Aug '05

07 Aug '05

Attached is a patch that fixes the configuration controller errors that sometimes occur when accessing the SystemACE CF. The patch also fixes the locking routines so that they do not stomp on the other bits in the controller register. Finally, the patch will auto detect the partition type to prevent "Partition x not valid on device y" error messages. CHANGELONG: * Patch by Jeff Angielski 09 Jan 2005 Fix errors that occur when accessing SystemACE CF.

2 1

[U-Boot-Users] [PATCH] fix PowerQUICC II masks detection
by Eugene Surovegin 06 Aug '05

06 Aug '05

Hi! This trivial patch fixes typos in cpu/mpc8260/cpu.c:checkcpu(). * Patch by Eugene Surovegin, 20 Dec 2004: Fix PowerQUICC II mask detection.

2 1

[U-Boot-Users] Patch: Add support for Embedded Planet EP8248 board
by Yuli Barcohen 06 Aug '05

06 Aug '05

Hi, The attached patch adds support for Embedded Planet EP8248 board. It was tested on EP8248E revision 1.0. CHANGELOG: Add support for Embedded Planet EP8248 board -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1

[U-Boot-Users] [PATCH] BUGFIX: serial setting for kgdb
by HoJin 06 Aug '05

06 Aug '05

Hi, KGDB_SMC_INDEX must be used as the index for brg_map, but it is used direclty. (compared with function serial_init) So it does not work properly. I have tested it and it works fine. I noticed the same problem with 'serial_scc.c', but I could not test it yet. Patch for only for 'serial_smc.c' is attached. Index: cpu/mpc8260/serial_smc.c =================================================================== --- cpu/mpc8260/serial_smc.c (revision 65) +++ cpu/mpc8260/serial_smc.c (working copy) @@ -360,10 +360,10 @@ /* Set up the baud rate generator. */ #if defined(CONFIG_KGDB_USE_EXTC) - m8260_cpm_extcbrg(KGDB_SMC_INDEX, speed, + m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed, CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); #else - m8260_cpm_setbrg(KGDB_SMC_INDEX, speed); + m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed); #endif /* Make the first buffer the only buffer. -- Hojin

2 1