May 2005 - U-Boot

[U-Boot-Users] [PATCH] Vibren PXA255 IDP Support
by Cliff Brake 26 Sep '05

26 Sep '05

The following patch adds support for the Vibren (was Accelent) PXA255 IDP platform: ftp://bec-systems.com/pub/pxa255_idp/u-boot/uboot_pxa255-idp_2004-12-28.pat… Let me know if any issues. I also maintain arch mirrors of the U-boot CVS tree and my IDP tree if you happen to use arch. http://bec-systems.com/phpwiki/index.php/UbootNotes Cliff -- ======================= Cliff Brake http://bec-systems.com http://www.vibren.com

3 8

[U-Boot-Users] [PATCH] AT91RM9200 - OHCI Patch
by Eric BENARD / Free 26 Sep '05

26 Sep '05

Hi, please find attached patches which add OHCI controller support for AT91RM9200 CPU. - diff-at91-ohci-1.patch : add files into cpu/arm920t/at91rm9200 - diff-at91-ohci-2.patch : add defines into include/asm-arm/arch-at91RM9200 - diff-mp2usb-ohci-partial : add usb configuration to MP2USB patch previously sent. CHANGELOG * Patch by Eric Benard, 07 Apr 2005: Add support for AT91RM9200 OHCI Controller. Sample session (on a PQFP AT91) : U-Boot 1.1.3 (Apr 7 2005 - 20:10:34) U-Boot code: 27F00000 -> 27F1C438 BSS: -> 27F2F204 RAM Configuration: Bank #0: 20000000 128 MB Flash: 16 MB In: serial Out: serial Err: serial Press SPACE to abort autoboot in 3 seconds => usb start (Re)start USB... USB: scanning bus for devices... 2 USB Devices found => usb scan Scan for storage device: scanning bus for storage devices... Device 0: Vendor: Kingston Prod.: DataTraveler II+ Rev: 1.13 Type: Removable Hard Disk Capacity: 491.5 MB = 0.4 GB (1006592 x 512) => usb info 1: Hub, USB Revision 1.10 - OHCI Root Hub - Class: Hub - PacketSize: 8 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 0.0 Configuration: 1 - Interfaces: 1 Self Powered 0mA Interface: 0 - Alternate Settings 0, Endpoints: 1 - Class Hub - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms 2: Mass Storage, USB Revision 2.0 - Kingston DataTraveler II+ 5B51050206B4 - Class: (from Interface) Mass Storage - PacketSize: 64 Configurations: 1 - Vendor: 0x0951 Product 0x1601 Version 1.0 Configuration: 1 - Interfaces: 1 Bus Powered 200mA Interface: 0 - Alternate Settings 0, Endpoints: 3 - Class Mass Storage, Transp. SCSI, Bulk only - Endpoint 1 In Bulk MaxPacket 64 - Endpoint 2 Out Bulk MaxPacket 64 - Endpoint 3 In Interrupt MaxPacket 64 Interval 1ms => usb part print_part of 0 Partition Map for USB device 0 -- Partition Type: DOS Partition Start Sector Num Sectors Type 1 32 1006560 b print_part of 1 ## Unknown partition table print_part of 2 ## Unknown partition table print_part of 3 ## Unknown partition table print_part of 4 ## Unknown partition table Best regards Eric

2 1

[U-Boot-Users] [PATCH] : updates include/asm-arm/mach-types.h
by Eric BENARD / Free 26 Sep '05

26 Sep '05

Hi, this patch updates mach-types.h to one generated on the 04/06/2005. Thanks Eric

2 1

[U-Boot-Users] [PATCH] Add Board MP2USB Board
by Eric BENARD / Free 26 Sep '05

26 Sep '05

Hi, same player shoot again, sorry for the bad previous patches. these patches add support for MP2USB board which is based on AT91RM9200 cpu. - diff-mp2usb-1.patch : adds board/mp2usb directory - diff-mp2usb-2.patch : adds include/configs/mp2usb.h - diff-mp2usb-3.patch : modify MAKEALL - diff-mp2usb-4.patch : modify Makefile CHANGELOG * Patch by Eric Benard, 07 Apr 2005: Add support for MP2USB board. Many thanks Best regards Eric

2 1

[U-Boot-Users] board support for armadillo
by Rowel Atienza 26 Sep '05

26 Sep '05

Wolfgang, patch against current cvs snapshot for armadillo board support. rowel CHANGELOG: * Patch by Rowel Atienza April 6, 2005 Added board support for armadillo HT1070 =================================================================================== diff -purN u-boot/board/armadillo/armadillo.c u-boot-armadillo/board/armadillo/armadillo.c --- u-boot/board/armadillo/armadillo.c 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/armadillo.c 2005-04-06 09:30:54.000000000 +0800 @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * (C) Copyright 2005 Rowel Atienza <rowel(a)diwalabs.com> + * Armadillo board HT1070 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <clps7111.h> + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Activate LED flasher */ + IO_LEDFLSH = 0x40; + + /* arch number MACH_TYPE_ARMADILLO - not official*/ + gd->bd->bi_arch_number = 83; + + /* location of boot parameters */ + gd->bd->bi_boot_params = 0xc0000100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} diff -purN u-boot/board/armadillo/config.mk u-boot-armadillo/board/armadillo/config.mk --- u-boot/board/armadillo/config.mk 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/config.mk 2005-04-06 09:30:54.000000000 +0800 @@ -0,0 +1,29 @@ +# +# (C) Copyright 2000 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger(a)sysgo.de> +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +#address where u-boot will be relocated +TEXT_BASE = 0xc0f80000 diff -purN u-boot/board/armadillo/flash.c u-boot-armadillo/board/armadillo/flash.c --- u-boot/board/armadillo/flash.c 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/flash.c 2005-04-06 09:30:54.000000000 +0800 @@ -0,0 +1,336 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * (C) Copyright 2005 Rowel Atienza <rowel(a)diwalabs.com> + * Flash driver for armadillo board HT1070 + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#define FLASH_BANK_SIZE 0x400000 + +/*value used by hermit is 0x200*/ +/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/ +#define MAIN_SECT_SIZE 0x10000 + +#define UNALIGNED_MASK (3) +#define FL_WORD(addr) (*(volatile unsigned short*)(addr)) +#define FLASH_TIMEOUT 20000000 + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + + +/*----------------------------------------------------------------------- + */ + +ulong flash_init (void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = + (FUJ_MANUFACT & FLASH_VENDMASK); + /*(INTEL_ID_28F128J3 & FLASH_TYPEMASK);*/ + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect ( FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect ( FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (FUJ_MANUFACT & FLASH_VENDMASK): + printf ("Fujitsu: "); + break; + default: + printf ("Unknown Vendor "); + break; + } +/* + switch (info->flash_id & FLASH_TYPEMASK) { + case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): + printf ("28F128J3 (128Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } +*/ + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + + Done: +} + +/* + * * Loop until both write state machines complete. + * */ +static unsigned short flash_status_wait(unsigned long addr, unsigned short value) +{ + unsigned short status; + long timeout = FLASH_TIMEOUT; + while (((status = (FL_WORD(addr))) != value) && timeout > 0) { + timeout--; + } + return status; +} + + +/* + * Loop until the Write State machine is ready, then do a full error + * check. Clear status and leave the flash in Read Array mode; return + * 0 for no error, -1 for error. + */ +static int flash_status_full_check(unsigned long addr, unsigned short value1, unsigned short value2) +{ + unsigned short status1, status2; + + status1 = flash_status_wait(addr, value1); + status2 = flash_status_wait(addr + 2, value2); + return (status1 != value1 || status2 != value2) ? -1 : 0; +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + int rc = ERR_OK; + unsigned long base; + unsigned long addr; + + if ((info->flash_id & FLASH_VENDMASK) != + (FUJ_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + flag = disable_interrupts (); + + printf ("Erasing %d sectors starting at sector %2d.\n This make take some time ... ", s_last-s_first, sect); + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + + addr = sect*MAIN_SECT_SIZE; + addr &= ~(unsigned long)UNALIGNED_MASK; /* word align */ + base = addr & 0xF0000000; + + FL_WORD(base + (0x555 << 1)) = 0xAA; + FL_WORD(base + (0x2AA << 1)) = 0x55; + FL_WORD(base + (0x555 << 1)) = 0x80; + FL_WORD(base + (0x555 << 1)) = 0xAA; + FL_WORD(base + (0x2AA << 1)) = 0x55; + FL_WORD(addr) = 0x30; + if(flash_status_full_check(addr, 0xFFFF, 0xFFFF)) return ERR_PROTECTED; + } + } + printf ("\nDone.\n"); + if (ctrlc ()) + printf ("User Interrupt!\n"); + + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); + + if (flag) + enable_interrupts (); + + return rc; +} + + + + +/*----------------------------------------------------------------------- + * Copy memory to flash + */ + +static int write_word (flash_info_t * info, ulong dest, ushort data) +{ + int flag; + unsigned long base; + + /* Check if Flash is (sufficiently) erased + */ + if ((FL_WORD(dest) & data) != data) + return ERR_NOT_ERASED; + + /*if(dest & UNALIGNED_MASK) return ERR_ALIGN;*/ + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + flag = disable_interrupts (); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + base = dest & 0xF0000000; + FL_WORD(base + (0x555 << 1)) = 0xAA; + FL_WORD(base + (0x2AA << 1)) = 0x55; + FL_WORD(base + (0x555 << 1)) = 0xA0; + FL_WORD(dest) = data; + /*printf("writing 0x%p = 0x%x\n",dest,data);*/ + if( flash_status_wait(dest, data) != data ) return ERR_PROG_ERROR; + + if (flag) + enable_interrupts (); + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp; + ushort data; + int l; + int i, rc; + + wp = (addr & ~1); /* get lower word aligned address */ + printf("Writing %d short data to 0x%p from 0x%p.\n ",cnt,wp,src); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + for (; i < 2 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 8); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + wp += 2; + } + + /* + * handle word aligned part + */ + while (cnt >= 2) { + data = *((vu_short *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; + } + + if (cnt == 0) { + printf("\nDone.\n"); + return ERR_OK; + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; + } + for (; i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + + return write_word (info, wp, data); +} diff -purN u-boot/board/armadillo/lowlevel_init.S u-boot-armadillo/board/armadillo/lowlevel_init.S --- u-boot/board/armadillo/lowlevel_init.S 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/lowlevel_init.S 2005-04-06 11:07:28.000000000 +0800 @@ -0,0 +1,66 @@ +/* + * Initialization stuff - taken from hermit + * (C) Copyright 2005 Rowel Atienza <rowel(a)diwalabs.com> + * Armadillo board HT1070 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> + + +/* some parameters for the board */ +/* setting up the memory */ +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0x0000c000 + +.globl lowlevel_init +lowlevel_init: + mov r0, #0x70 /* 32-bit code + data, MMU mandatory */ + mcr p15, 0, r0, c1, c0, 0 /* MMU init */ + + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + mov r0, #0x80000000 /* I/O base */ + + mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */ + add r2, r0, #0x2200 /* address of SYSCON3 in r2 */ + str r1, [r2] /* set clock speed to 73.728 MHz */ + + mov r1, #0x81 /* 64KHz DRAM refresh period */ + str r1, [r0, #0x200] /* set DRFPR */ + + mov r1, #0x500 /* permanent enable, 16bits wide */ + add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */ + add r2, r0, #0x2300 /* load address in r2 */ + str r1, [r2] + + mov r1, #0x100 /* SDRAM refresh rate */ + add r2, r0, #0x2340 /* load address in r2 */ + str r1, [r2] + + mov sp, #SRAM_START /* init stack pointer */ + add sp, sp, #SRAM_SIZE + + /* everything is fine now */ + mov pc, lr diff -purN u-boot/board/armadillo/Makefile u-boot-armadillo/board/armadillo/Makefile --- u-boot/board/armadillo/Makefile 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/Makefile 2005-04-06 11:08:19.000000000 +0800 @@ -0,0 +1,48 @@ +# +# (C) Copyright 2002 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger(a)sysgo.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := armadillo.o flash.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -purN u-boot/board/armadillo/u-boot.lds u-boot-armadillo/board/armadillo/u-boot.lds --- u-boot/board/armadillo/u-boot.lds 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/board/armadillo/u-boot.lds 2005-04-06 09:30:54.000000000 +0800 @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm720t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -purN u-boot/cpu/arm720t/cpu.c u-boot-armadillo/cpu/arm720t/cpu.c --- u-boot/cpu/arm720t/cpu.c 2005-04-04 01:23:39.000000000 +0800 +++ u-boot-armadillo/cpu/arm720t/cpu.c 2005-04-06 09:30:54.000000000 +0800 @@ -57,7 +57,7 @@ int cleanup_before_linux (void) * and we set the CPU-speed to 73 MHz - see start.S for details */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) unsigned long i; disable_interrupts (); @@ -95,7 +95,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag * */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1(void) { diff -purN u-boot/cpu/arm720t/interrupts.c u-boot-armadillo/cpu/arm720t/interrupts.c --- u-boot/cpu/arm720t/interrupts.c 2005-04-04 20:08:30.000000000 +0800 +++ u-boot-armadillo/cpu/arm720t/interrupts.c 2005-04-06 09:30:54.000000000 +0800 @@ -180,7 +180,7 @@ void do_fiq (struct pt_regs *pt_regs) void do_irq (struct pt_regs *pt_regs) { -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) printf ("interrupt request\n"); show_regs (pt_regs); bad_mode (); @@ -233,7 +233,7 @@ int interrupt_init (void) /* set timer 2 counter */ lastdec = TIMER_LOAD_VAL; -#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) /* disable all interrupts */ IO_INTMR1 = 0; @@ -301,7 +301,7 @@ int interrupt_init (void) */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) void reset_timer (void) { diff -purN u-boot/cpu/arm720t/serial.c u-boot-armadillo/cpu/arm720t/serial.c --- u-boot/cpu/arm720t/serial.c 2004-07-02 00:30:47.000000000 +0800 +++ u-boot-armadillo/cpu/arm720t/serial.c 2005-04-06 09:30:54.000000000 +0800 @@ -30,7 +30,7 @@ #include <common.h> -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) #include <clps7111.h> diff -purN u-boot/cpu/arm720t/start.S u-boot-armadillo/cpu/arm720t/start.S --- u-boot/cpu/arm720t/start.S 2005-04-04 20:44:14.000000000 +0800 +++ u-boot-armadillo/cpu/arm720t/start.S 2005-04-06 09:30:54.000000000 +0800 @@ -188,7 +188,7 @@ _start_armboot: .word start_armboot ************************************************************************* */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) /* Interupt-Controller base addresses */ INTMR1: .word 0x80000280 @ 32 bit size @@ -209,7 +209,7 @@ SYSCON3: .word 0x80002200 #endif cpu_init_crit: -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) /* * mask all IRQs by clearing all bits in the INTMRs @@ -495,7 +495,7 @@ fiq: #endif -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) .align 5 .globl reset_cpu reset_cpu: diff -purN u-boot/include/asm-arm/arch-arm720t/hardware.h u-boot-armadillo/include/asm-arm/arch-arm720t/hardware.h --- u-boot/include/asm-arm/arch-arm720t/hardware.h 2004-07-02 00:30:48.000000000 +0800 +++ u-boot-armadillo/include/asm-arm/arch-arm720t/hardware.h 2005-04-06 09:30:54.000000000 +0800 @@ -32,6 +32,8 @@ /* include IMPA7 specific hardware file if there was one */ #elif defined(CONFIG_EP7312) /* include EP7312 specific hardware file if there was one */ +#elif defined(CONFIG_ARMADILLO) +/* include armadillo specific hardware file if there was one */ #else #error No hardware file defined for this configuration #endif diff -purN u-boot/include/configs/armadillo.h u-boot-armadillo/include/configs/armadillo.h --- u-boot/include/configs/armadillo.h 1970-01-01 08:00:00.000000000 +0800 +++ u-boot-armadillo/include/configs/armadillo.h 2005-04-06 11:38:47.000000000 +0800 @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2000 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * Configuation settings for the EP7312 board. + * + * Modified to work on Armadillo HT1070 ARM720T board + * (C) Copyright 2005 Rowel Atienza rowel(a)diwalabs.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +/*#define CONFIG_INIT_CRITICAL*/ /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ +#define CS8900_BASE 0x20000300 /* armadillo board */ +#define CS8900_BUS16 1 +#undef CS8900_BUS32 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200" + +#define CONFIG_BOOTCOMMAND "bootm 40000 180000" + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "ARMADILLO # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ + +#define CFG_HZ 2000 /* decrementer freq: 2 kHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#endif /* __CONFIG_H */ diff -purN u-boot/lib_arm/armlinux.c u-boot-armadillo/lib_arm/armlinux.c --- u-boot/lib_arm/armlinux.c 2005-01-12 08:15:17.000000000 +0800 +++ u-boot-armadillo/lib_arm/armlinux.c 2005-04-06 09:30:54.000000000 +0800 @@ -167,7 +167,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, i do_reset (cmdtp, flag, argc, argv); } -#if defined(CONFIG_B2) || defined(CONFIG_EVB4510) +#if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO) /* *we need to copy the ramdisk to SRAM to let Linux boot */ diff -purN u-boot/MAINTAINERS u-boot-armadillo/MAINTAINERS --- u-boot/MAINTAINERS 2005-04-04 07:11:38.000000000 +0800 +++ u-boot-armadillo/MAINTAINERS 2005-04-06 09:30:54.000000000 +0800 @@ -342,6 +342,9 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### +Rowel Atienza <rowel(a)diwalabs.com> + armadillo ARM720T + George G. Davis <gdavis(a)mvista.com> assabet SA1100 diff -purN u-boot/MAKEALL u-boot-armadillo/MAKEALL --- u-boot/MAKEALL 2005-04-06 08:04:17.000000000 +0800 +++ u-boot-armadillo/MAKEALL 2005-04-06 09:30:54.000000000 +0800 @@ -146,7 +146,7 @@ LIST_SA="assabet dnp1110 gcplus lart sha ## ARM7 Systems ######################################################################### -LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50" +LIST_ARM7="armadillo B2 ep7312 evb4510 impa7 modnet50" ######################################################################### ## ARM9 Systems diff -purN u-boot/Makefile u-boot-armadillo/Makefile --- u-boot/Makefile 2005-04-06 08:04:17.000000000 +0800 +++ u-boot-armadillo/Makefile 2005-04-06 09:30:54.000000000 +0800 @@ -1406,6 +1406,9 @@ B2_config : unconfig ## ARM720T Systems ######################################################################### +armadillo_config: unconfig + @./mkconfig $(@:_config=) arm arm720t armadillo + ep7312_config : unconfig @./mkconfig $(@:_config=) arm arm720t ep7312 diff -purN u-boot/README u-boot-armadillo/README --- u-boot/README 2005-04-06 07:32:22.000000000 +0800 +++ u-boot-armadillo/README 2005-04-06 09:36:09.000000000 +0800 @@ -302,13 +302,13 @@ The following options need to be configu ARM based boards: ----------------- - CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, - CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, - CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, - CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_VCMA9 + CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250, + CONFIG_DNP1110, CONFIG_EP7312, CONFIG_H2_OMAP1610, + CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, + CONFIG_INNOVATOROMAP1610, CONFIG_LART, CONFIG_LPD7A400 + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, + CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------

2 1

[U-Boot-Users] [Patch] Second Eth enabled for MPC885ADS and MPC8272ADS
by Vitaly Bordug 26 Sep '05

26 Sep '05

Wolfgang, I agree that hardcoded MAC is not a good thing since it is not really required. I noticed that 8272ADS also has the only FCC - the relevant change for it is also included. Attached a patch which enables the second Ethernet address in MPC885ADS and MPC8272ADS configurations. Patch made against current CVS. CHANGELOG: * Second Ethernet address enabled in the configurations for MPC885ADS and MPC8272ADS. -- Sincerely, Vitaly ? include/configs/MPC8260ADS.my.h Index: include/configs/MPC8260ADS.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/MPC8260ADS.h,v retrieving revision 1.20 diff -p -u -r1.20 MPC8260ADS.h --- include/configs/MPC8260ADS.h 31 Dec 2004 09:32:53 -0000 1.20 +++ include/configs/MPC8260ADS.h 30 Mar 2005 15:36:06 -0000 @@ -390,4 +390,8 @@ #define CFG_RESET_ADDRESS 0x04400000 +#if CONFIG_ADSTYPE == CFG_8272ADS +#define CONFIG_HAS_ETH1 +#endif + #endif /* __CONFIG_H */ Index: include/configs/MPC885ADS.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/MPC885ADS.h,v retrieving revision 1.1 diff -p -u -r1.1 MPC885ADS.h --- include/configs/MPC885ADS.h 6 Jun 2004 21:35:08 -0000 1.1 +++ include/configs/MPC885ADS.h 30 Mar 2005 15:36:07 -0000 @@ -42,4 +42,6 @@ #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) +#define CONFIG_HAS_ETH1 + #endif /* __CONFIG_H */

2 1

[U-Boot-Users] [PATCH] Add client id and class id to dhcp options
by Kylo Ginsberg 26 Sep '05

26 Sep '05

This patch adds the client identifier and class identifier options to dhcp. The former permits consistent address assignment from servers that key off the client identifier; the latter aids in debugging. Index: net/bootp.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/net/bootp.c,v retrieving revision 1.14 diff -u -r1.14 bootp.c --- net/bootp.c 15 Apr 2004 21:48:49 -0000 1.14 +++ net/bootp.c 30 Mar 2005 01:14:17 -0000 @@ -378,8 +378,11 @@ * Initialize BOOTP extension fields in the request. */ #if (CONFIG_COMMANDS & CFG_CMD_DHCP) -static int DhcpExtended (u8 * e, int message_type, IPaddr_t ServerID, IPaddr_t RequestedIP) +static int DhcpExtended (u8 * e, int message_type, IPaddr_t ServerID, IPaddr_t RequestedIP, + char *EtherAddr) { + char *class_id = "U-boot"; + int len; u8 *start = e; u8 *cnt; @@ -404,6 +407,23 @@ *e++ = (576 - 312 + OPT_SIZE) >> 8; *e++ = (576 - 312 + OPT_SIZE) & 0xff; + *e++ = 61; /* Client Identifier, use the MAC */ + *e++ = 7; + *e++ = 1; + *e++ = EtherAddr[0]; + *e++ = EtherAddr[1]; + *e++ = EtherAddr[2]; + *e++ = EtherAddr[3]; + *e++ = EtherAddr[4]; + *e++ = EtherAddr[5]; + + *e++ = 60; /* Class Identifier */ + len = strlen(class_id); + *e++ = len; + /* don't use strcpy, we don't want the terminating 0 */ + memcpy(e, class_id, len); + e += len; + if (ServerID) { int tmp = ntohl (ServerID); @@ -671,7 +691,7 @@ /* Request additional information from the BOOTP/DHCP server */ #if (CONFIG_COMMANDS & CFG_CMD_DHCP) - ext_len = DhcpExtended(bp->bp_vend, DHCP_DISCOVER, 0, 0); + ext_len = DhcpExtended(bp->bp_vend, DHCP_DISCOVER, 0, 0, NetOurEther); #else ext_len = BootpExtended(bp->bp_vend); #endif /* CFG_CMD_DHCP */ @@ -817,7 +837,7 @@ * Copy options from OFFER packet if present */ NetCopyIP(&OfferedIP, &bp->bp_yiaddr); - extlen = DhcpExtended(bp->bp_vend, DHCP_REQUEST, NetDHCPServerIP, OfferedIP); + extlen = DhcpExtended(bp->bp_vend, DHCP_REQUEST, NetDHCPServerIP, OfferedIP, NetOurEther); pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + extlen; iplen = BOOTP_HDR_SIZE - sizeof(bp->bp_vend) + extlen;

2 1

[U-Boot-Users] [PATCH] iopset implemented for mpc8xx
by Eisenhut, Daniel (GE Healthcare) 26 Sep '05

26 Sep '05

Wolfgang, See attached patch file (Outlook will wrap lines if I inline it). This implements the iopset command for the mpc8xx. Current u-boot gives you the "not implemented yet" message. I got tired of adding in ioport changes and recompiling each time. Written and tested using u-boot-1.1.1 on an mpc860, but no changes have been made to the edited files since that tag. I couldn't figure out a simple clean solution since the 4 ioports are not all together, not all have the same number of registers, and some are ushorts while others are uints. So I gave up and did the brute force approach. If anyone else has a better solution, be my guest. Also noticed that the iopinfo displays ports A, C, and D incorrectly on the mpc8xx. Ports 1-15 and displayed under 16-31 headers. But I'll save that fix for another day... CHANGELOG: Implemented iopset command on mpc8xx Dan Eisenhut

2 1

[U-Boot-Users] [PATCH] mii support for eepro100
by Gleb Natapov 26 Sep '05

26 Sep '05

Hello, Attached patch adds support for mii commands in eepro100 driver. CHANGELOG: Add support for MII in eepro100. -- Gleb.

2 1

[U-Boot-Users] [Patch] CFI flash for ARM supplied & supported development boards
by Peter Pearse 26 Sep '05

26 Sep '05

Apologies for previous broken & oversized patches. The attached patch has been tested with MAKEALL arm. It provides CFI support for all ARM supplied ARM supported development boards i.e. http://www.arm.com/products/DevTools/VPB926EJ-S.html http://www.arm.com/products/DevTools/Applicationbaseboard.html http://www.arm.com/products/DevTools/IntegratorCP.html This protects against possible future flash component changes. > CHANGELOG: > * Patch by Peter Pearse, 14 Mar 2005 > Changes all ARM supplied development boards, supported by ARM, to use CFI flash. > Adds CFI support for the Versatile/AB926EJ-S. ------------------------------------------------------------------------- Peter Pearse ARM Ltd ------------------------ Peter.Pearse(a)arm.com -------------------------

2 1

[U-Boot-Users] lubbock patch: ram, flash, ethernet
by David Brownell 26 Sep '05

26 Sep '05

U-Boot support for Lubbock still needs some work, but this fixes a few of the more blatant problems. I look forward to replacing that crufty old "BLOB" with a shiny new U-Boot. :) I saw some email archived from about 10 months back saying that the TFTP timeout/retry problems went away given PXA timer updates, but like the ethernet patch that was also needed, a patch wasn't posted or merged. Maybe someone who has unmerged PXA updates has the relevant code ready to merge? - Dave

4 4

[U-Boot-Users] [PATCH] OMAP242x/H4 board updates.
by Woodruff, Richard 25 Sep '05

25 Sep '05

Hello, This patch is against a CVS pull from today (3Mar05). It updates the H4 board for operation with the OMAP242x ES2 chip. Along with some other fixes it also switches to using the CFI flash driver for a 6x write speed up. The CFI driver needed some minor changes as this Intel part works on a per partition basis. The current driver would assume that a query command to the base of the part would affect the whole chip. This is not the case. It also had some strange code which acted like sector unlocks were per chip instead of per sector, this is not the case. - OMAP242x H4 board update - fix for ES2 differences. - switch to using the cfi_flash driver. - fix SRAM build address. - fix for GP device operation. - unlock SRAM for GP devices. - display more device information. - fix potential deadlock in omap24xx_i2c driver. - fix DLL load values to match dpllout*1 operation. - fix 2nd chip select init for combo DDR device. - cfi_flash.c - add support for CFI Intel 28F256L18 on H4 board. Regards, Richard W.

3 2

[U-Boot-Users] Cleanup in AT91RM9200.h ?
by Steven Scholz 25 Sep '05

25 Sep '05

Dear Wolfgang, the formating/indenting in include/asm-arm/arch-at91rm9200/AT91RM9200.h looks terrible. Would use except a patch that only does whitspace fixing in this file? -- Steven

2 3

[U-Boot-Users] [PATCH] typo in eth.c
by Ara Avanesyan 25 Sep '05

25 Sep '05

--- u-boot-05-01-12-original/net/eth.c 2004-12-16 21:49:38.000000000 +0400 +++ u-boot-1.1.2_05-01-12/net/eth.c 2005-02-19 15:44:58.000000000 +0400 @@ -292,9 +292,9 @@ debug ( "Setting new HW address on %s\n" "New Address is %02X:%02X:%02X:%02X:%02X:%02X\n", dev->name, - dev->enetaddr[0], dev->enetaddr[1], - dev->enetaddr[2], dev->enetaddr[3], - dev->enetaddr[4], dev->enetaddr[5]); + enetaddr[0], enetaddr[1], + enetaddr[2], enetaddr[3], + enetaddr[4], enetaddr[5]); memcpy(dev->enetaddr, enetaddr, 6); } __ Thanks, Ara

2 1

[U-Boot-Users] [PATCH] Remove unneeded #include <malloc.h>
by Ladislav Michl 25 Sep '05

25 Sep '05

Hi Wolfgang, this u-patch is remnant of my effort to have malloc pool in SDRAM and the rest of U-Boot in SRAM. Best regards, ladis Index: common/env_dataflash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/env_dataflash.c,v retrieving revision 1.1 diff -u -r1.1 env_dataflash.c --- common/env_dataflash.c 6 Dec 2003 23:55:11 -0000 1.1 +++ common/env_dataflash.c 22 Feb 2005 11:04:56 -0000 @@ -24,7 +24,6 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> -#include <malloc.h> #include <dataflash.h> env_t *env_ptr = NULL; Index: common/env_eeprom.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/env_eeprom.c,v retrieving revision 1.2 diff -u -r1.2 env_eeprom.c --- common/env_eeprom.c 27 Jun 2003 21:32:31 -0000 1.2 +++ common/env_eeprom.c 22 Feb 2005 11:04:56 -0000 @@ -31,7 +31,6 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> -#include <malloc.h> env_t *env_ptr = NULL; Index: common/env_nand.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/env_nand.c,v retrieving revision 1.2 diff -u -r1.2 env_nand.c --- common/env_nand.c 19 Jun 2004 21:19:12 -0000 1.2 +++ common/env_nand.c 22 Feb 2005 11:04:56 -0000 @@ -36,7 +36,6 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> -#include <malloc.h> #include <linux/mtd/nand.h> #if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_NAND)) == (CFG_CMD_ENV|CFG_CMD_NAND)) Index: common/env_nowhere.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/env_nowhere.c,v retrieving revision 1.1.1.1 diff -u -r1.1.1.1 env_nowhere.c --- common/env_nowhere.c 18 Sep 2002 11:09:59 -0000 1.1.1.1 +++ common/env_nowhere.c 22 Feb 2005 11:04:56 -0000 @@ -31,7 +31,6 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> -#include <malloc.h> env_t *env_ptr = NULL; Index: common/env_nvram.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/env_nvram.c,v retrieving revision 1.3 diff -u -r1.3 env_nvram.c --- common/env_nvram.c 27 Jun 2003 21:32:31 -0000 1.3 +++ common/env_nvram.c 22 Feb 2005 11:04:56 -0000 @@ -47,7 +47,6 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> -#include <malloc.h> #ifdef CFG_NVRAM_ACCESS_ROUTINE extern void *nvram_read(void *dest, const long src, size_t count); Index: common/main.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/main.c,v retrieving revision 1.21 diff -u -r1.21 main.c --- common/main.c 9 Jan 2005 23:33:50 -0000 1.21 +++ common/main.c 22 Feb 2005 11:04:56 -0000 @@ -26,7 +26,6 @@ #include <common.h> #include <watchdog.h> #include <command.h> -#include <malloc.h> #ifdef CFG_HUSH_PARSER #include <hush.h>

2 1

[U-Boot-Users] [PATCH] cramfs support for m68k
by Zachary Landau 25 Sep '05

25 Sep '05

Hello, The attached patch provides a couple simple changes necessary to get CRAMFS support working on the M68K. -- Zachary P. Landau <kapheine(a)gmail.com>

2 1

[U-Boot-Users] [PATCH]: Fix EP8260 H2 flash timeouts
by Jeff Angielski 25 Sep '05

25 Sep '05

Very small patch to ep8260.h to fix the flash timeouts and to improve the clock accuracy for faster UARTs by reducing the BRG divisor in the SCCR. CHANGELOG: * Patch by Jeff Angielski 21 Feb 2005 Fix flash write/erase timeouts. Improve clock resolution for faster UARTs. Jeff Angielski

2 1

[U-Boot-Users] [patch] MIPS: AMD Alchemy au1x00 ethernet initialization in cpu/mips/au1x00_eth.c
by Joseph Chiu 25 Sep '05

25 Sep '05

Hi, On u-boot bootloader 1.1.2 on AMD Alchemy Au1x00: The au1x00_mac.c assumes that ethernet transmit always starts with transmit buffer 0. This is not necessarily true (in the event of a warm reboot). This little patch fixes that and prevents (reduces?) transmit timeouts that you might see when you're repeatedly warm-rebooting your board during development. Cheers, Joseph Chiu www.omnilux.net LC_ALL=C TZ=UTC0 diff -Naur u-boot-1.1.2.orig/cpu/mips/au1x00_eth.c u-boot-1.1.2.new/cpu/mips/au1x00_eth.c --- u-boot-1.1.2.orig/cpu/mips/au1x00_eth.c Fri Jan 2 15:01:32 2004 +++ u-boot-1.1.2.new/cpu/mips/au1x00_eth.c Wed Feb 16 02:10:27 2005 @@ -167,9 +167,6 @@ (volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS); int i; - next_tx = 0; - next_rx = 0; - /* We have to enable clocks before releasing reset */ *macen = MAC_EN_CLOCK_ENABLE; udelay(10); @@ -186,6 +183,9 @@ fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE; } + next_tx = (fifo_tx[0].addr & 0x0c )>>2; + next_rx = (fifo_rx[0].addr & 0x0c )>>2; + /* Put mac addr in little endian */ #define ea eth_get_dev()->enetaddr *mac_addr_high = (ea[5] << 8) | (ea[4] ) ;

3 2

[U-Boot-Users] [patch] au1x00_serial.c fix baud rate computation
by Andrew Dyer 25 Sep '05

25 Sep '05

CHANGELOG: * Patch by Andrew Dyer, 15 February 2005: fix au1x00_serial to remove hardcoded cpu clock divisor and use register instead. change baud rate calculation to round up instead of truncate in cases where fractional part would have been > 0.5 -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] [PATCH] Spartan3 family support
by Kurt Stremerch 25 Sep '05

25 Sep '05

Hi all. This small patch, against current cvs, adds Xilinx Spartan3 support. Only the bitstream size differs from the Spartan2 family, the configuration method stays the same. Regards Kurt CHANGELOG: * Patch by Kurt Stremerch, 14 February 2005: Add Xilinx Spartan3 family fpga support

4 5

[U-Boot-Users] [PATCH] Use info->reset_cmd instead of FLASH_CMD_RESET
by Zachary Landau 25 Sep '05

25 Sep '05

Hello, This patch makes cfi_flash.c use info->cmd_reset. It was being set by flash_get_size() but not being used, which kept the Flash on my board from properly being reset. It looks like there are a lot of switch cases for different flash types that could probably probably be removed by setting up some function pointers, but that is a project for another time. -- Zachary P. Landau <kapheine(a)gmail.com>

2 1

[U-Boot-Users] [Patch] MPC8272ADS PCI bridge support
by Vitaly Bordug 25 Sep '05

25 Sep '05

Hi, Attached a patch which adds support of the MPC8272ADS PCI bridge. This stuff is based on mpc8266ads, and has been tested with a Freescale MPC8272ADS board. Also attached a patch to README file which describes CFG_PCI_INT config entry (used in the 8266 but not documented yet). Patch made against CVS checkout of Feb 9 2005 CHANGELOG: * Patch by Vitaly Bordug, Feb 9 2005 Added support for PCI bridge on MPC8272ADS -- Sincerely, Vitaly

2 1

[U-Boot-Users] [Patch] ARM Integrator/AP multicore patch
by jean-paul.saman＠philips.com 25 Sep '05

25 Sep '05

The patch is created against the multicore patch from Peter Pearse 02-02-2005 CHANGELOG: * Patch by Jean-Paul Saman, 8 Feb 2005 - Patch based on multicore patch from Peter Pearse 02-02-2005 - multicore CM9XX support for ARM Integrator AP defining CONFIG_CM_INIT and CONFIG_CM_REMAP allows to booting u-boot directly from flash Kind greetings, Jean-Paul Saman Philips Semiconductors CTO/RTG Philips HighTech Campus, building WDB 3.29 Professor van den Holstlaan 4 5655 AA Eindhoven tel: +31 (0)40 27 45131

2 1

[U-Boot-Users] [patch] fix lib_generic version of strswab()
by Andrew Dyer 25 Sep '05

25 Sep '05

This patch changes the behavior of strswab() to end the byte swapping when either of the two candidate bytes is null. The old behavior was to only abort when the second byte was null. It looks like this is only used for little endian machines running with CONFIG_IDE. I noticed this because the ide serial number was not printing out - the reason was strswab() was running past the end of the previous string in memory and swapping a null into the first byte of my serial number string. -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] Patch: Typos in include/ppc440.h
by Andrew E Mileski 25 Sep '05

25 Sep '05

This is in CVS as well as u-boot-1.1.2.tar.bz2 and as far back as at least u-boot-0.2.0.tar.bz2 File: include/ppc440.h Line:235 Context: #define pbear 0x20 /* periph bus error addr reg */ #define pbesr 0x21 /* periph bus error status reg */ #define xbcfg 0x23 /* external bus configuration reg */ #define xbcid 0x23 /* external bus core id reg */ ^^^^ According to the 440GX user manual (mine's dated Nov 21, 2003) table 4-13 on page 186, EBC0_CID the "EBCO Peripheral Core ID Register" is located at offset 0x24. This register is not currently referenced by any code in the u-boot-1.1.2.tar.bz2 release, which explains why it has survied so long. Also note that the header comment for this section has a typo, which is also corrected in the attached patch. -- Andrew E. Mileski diff -urN include/ppc440.h.orig include/ppc440.h --- include/ppc440.h.orig 2005-02-04 15:55:53.000000000 -0500 +++ include/ppc440.h 2005-02-04 16:13:20.000000000 -0500 @@ -207,7 +207,7 @@ #define mem_eccesr 0x0098 /* ECC error status */ /*----------------------------------------------------------------------------- - | Extrnal Bus Controller + | External Bus Controller +----------------------------------------------------------------------------*/ #define EBC_DCR_BASE 0x12 #define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */ @@ -232,7 +232,7 @@ #define pbear 0x20 /* periph bus error addr reg */ #define pbesr 0x21 /* periph bus error status reg */ #define xbcfg 0x23 /* external bus configuration reg */ -#define xbcid 0x23 /* external bus core id reg */ +#define xbcid 0x24 /* external bus core id reg */ /*----------------------------------------------------------------------------- | Internal SRAM

2 1