April 2005 - U-Boot

[U-Boot-Users] [PATCH 1/4][RESEND] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch moves the implementation of the DM9161 PHY from the board directories into cpu/arm920t/at91rm9200 (patch gzip'ed due to size) Rationale: The code in question (dm9161.c) is used by two boards, namely the at91rm9200dk and the cmc_pu2; the source file in question was present (identically) in both board-specific directories. I didn't move it into the global drivers directory, since the code is at91rm9200-specific. The patch patch also moves lxt972.c from board/kb9202 accordingly, see pending patch from 2005-04-27 "KB920x initial patch..." Changelog: * patch by Anders Larsen, 2005-04-29 move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 Cheers Anders

2 1

[U-Boot-Users] [PATCH]: Fix partition initialization for SystemACE
by Stephen Williams 05 Oct '05

05 Oct '05

This patch seems to have gotten lost in the frey. It properly initializes the partition table structure for SystemACE devices. Without it, partition commands to not work properly. CHANGELOG * Patch by Stephen Williams, 28 April 2005 Properly intialize the device partition structure for SystemACE disks. -- Steve Williams "The woods are lovely, dark and deep. steve at icarus.com But I have promises to keep, http://www.icarus.com and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep."

3 3

[U-Boot-Users] patch submission info
by kb_admin 05 Oct '05

05 Oct '05

Greetings, Can someone please tell me the appropriate list to which I should submit the diffs/patch file for new board support? Thank you in advance, Matt kb9200_dev(a)kwikbyte.com

3 6

[U-Boot-Users] PATCH: Point e500 IVPR at memory during code relocation
by Kylo Ginsberg 05 Oct '05

05 Oct '05

Hello, Please consider the following e500-specific patch, which reloads the IVPR to point at ram when code is relocated to ram. The IVPR assumes 64KB alignment, so code is copied to a 64K aligned region. * Patch by Kylo Ginsberg, 13 Apr 2005: - repoint IVPR at ram when code is relocated Thanks, Kylo

2 1

[U-Boot-Users] [Patch] CFI flash for ARM supplied & supported development boards
by Peter Pearse 04 Oct '05

04 Oct '05

The attached patch has been tested for building with MAKEALL arm. Patched code has been tested to boot linux & save environment with - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - Versatile AB926EJ-S. It provides CFI support for all ARM supplied ARM supported development boards i.e. http://www.arm.com/products/DevTools/VPB926EJ-S.html http://www.arm.com/products/DevTools/Applicationbaseboard.html http://www.arm.com/products/DevTools/IntegratorCP.html This protects against possible future flash component changes. Replaces the patch submitted on 2005-03-15. Patched against CVS head of 12 Apr 2005. > CHANGELOG: > * Patch by Peter Pearse, 12 Apr 2005 > Changes all ARM supplied development boards, supported by ARM, to use CFI flash. > Adds CFI support for the Versatile/AB926EJ-S. Please report any errors and/or omissions to ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] [Patch] Multicore patch for ARM supplied development boards.
by Peter Pearse 04 Oct '05

04 Oct '05

Hi Attached corrected multicore patch - somehow I lost the fact that the omap boards not yet migrated to using lowlevel_init. Please inform me of any defects found. CHANGELOG: * Patch by Peter Pearse, 12 Apr 2005 - add core module targets for integratorap, integratorcp - add ARM946E cpu support - remap SSRAM memory to 0x00000000 Notes ----- a) Provides targets for all supported Core Modules - targets are of the form integrator<type>_CM<id>_config Examples make integratorap_CM946E_S make integratorcp_CM920T_config b) Previous targets integegratorcp, integratorap retained. c) Tested to build with MAKEALL arm d) Tested to boot linux with - Integrator/CP CM920T - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - both Integrator combinations boot in all three settings - Manually run U-Boot in ARM Boot Monitor - Auto boot U-Boot through ARM Boot Monitor - Auto boot direct into U-Boot e) Patched against head at 12 Apr 2005 f) Replaces the patch submitted on 11 Apr 2005 ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] [Patch]
by Peter Pearse 04 Oct '05

04 Oct '05

Hi Attached remade multicore patch to allow users to specify the core module fitted to their ARM supplied Integrator development board. Please inform me of any defects found. CHANGELOG: * Patch by Peter Pearse, 11 Apr 2005 - add core module targets for integratorap, integratorcp - add ARM946E cpu support - remap SSRAM memory to 0x00000000 Notes ----- a) Provides targets for all supported Core Modules - targets are of the form integrator<type>_CM<id>_config Examples make integratorap_CM946E_S make integratorcp_CM920T_config b) Previous targets integegratorcp, integratorap retained. c) Tested to build with MAKEALL arm d) Tested to boot linux with - Integrator/CP CM920T - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - both Integrator combinations boot in all three settings - Manually run U-Boot in ARM Boot Monitor - Auto boot U-Boot through ARM Boot Monitor - Auto boot direct into U-Boot e) Patched against head at 11 Apr 2005 f) Replaces the patch submitted on 02 Feb 2005 ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] [PATCH] Vibren PXA255 IDP Support
by Cliff Brake 26 Sep '05

26 Sep '05

The following patch adds support for the Vibren (was Accelent) PXA255 IDP platform: ftp://bec-systems.com/pub/pxa255_idp/u-boot/uboot_pxa255-idp_2004-12-28.pat… Let me know if any issues. I also maintain arch mirrors of the U-boot CVS tree and my IDP tree if you happen to use arch. http://bec-systems.com/phpwiki/index.php/UbootNotes Cliff -- ======================= Cliff Brake http://bec-systems.com http://www.vibren.com

3 8

[U-Boot-Users] [PATCH] AT91RM9200 - OHCI Patch
by Eric BENARD / Free 26 Sep '05

26 Sep '05

Hi, please find attached patches which add OHCI controller support for AT91RM9200 CPU. - diff-at91-ohci-1.patch : add files into cpu/arm920t/at91rm9200 - diff-at91-ohci-2.patch : add defines into include/asm-arm/arch-at91RM9200 - diff-mp2usb-ohci-partial : add usb configuration to MP2USB patch previously sent. CHANGELOG * Patch by Eric Benard, 07 Apr 2005: Add support for AT91RM9200 OHCI Controller. Sample session (on a PQFP AT91) : U-Boot 1.1.3 (Apr 7 2005 - 20:10:34) U-Boot code: 27F00000 -> 27F1C438 BSS: -> 27F2F204 RAM Configuration: Bank #0: 20000000 128 MB Flash: 16 MB In: serial Out: serial Err: serial Press SPACE to abort autoboot in 3 seconds => usb start (Re)start USB... USB: scanning bus for devices... 2 USB Devices found => usb scan Scan for storage device: scanning bus for storage devices... Device 0: Vendor: Kingston Prod.: DataTraveler II+ Rev: 1.13 Type: Removable Hard Disk Capacity: 491.5 MB = 0.4 GB (1006592 x 512) => usb info 1: Hub, USB Revision 1.10 - OHCI Root Hub - Class: Hub - PacketSize: 8 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 0.0 Configuration: 1 - Interfaces: 1 Self Powered 0mA Interface: 0 - Alternate Settings 0, Endpoints: 1 - Class Hub - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms 2: Mass Storage, USB Revision 2.0 - Kingston DataTraveler II+ 5B51050206B4 - Class: (from Interface) Mass Storage - PacketSize: 64 Configurations: 1 - Vendor: 0x0951 Product 0x1601 Version 1.0 Configuration: 1 - Interfaces: 1 Bus Powered 200mA Interface: 0 - Alternate Settings 0, Endpoints: 3 - Class Mass Storage, Transp. SCSI, Bulk only - Endpoint 1 In Bulk MaxPacket 64 - Endpoint 2 Out Bulk MaxPacket 64 - Endpoint 3 In Interrupt MaxPacket 64 Interval 1ms => usb part print_part of 0 Partition Map for USB device 0 -- Partition Type: DOS Partition Start Sector Num Sectors Type 1 32 1006560 b print_part of 1 ## Unknown partition table print_part of 2 ## Unknown partition table print_part of 3 ## Unknown partition table print_part of 4 ## Unknown partition table Best regards Eric

2 1

[U-Boot-Users] [PATCH] : updates include/asm-arm/mach-types.h
by Eric BENARD / Free 26 Sep '05

26 Sep '05

Hi, this patch updates mach-types.h to one generated on the 04/06/2005. Thanks Eric

2 1