October 2005 - U-Boot

[U-Boot-Users] [PATCH] bugfix in cmd_bootm.c when booting at91rm9200dk from dataflash
by Peter Menzebach 06 Oct '05

06 Oct '05

Attached a bugfix, when booting an u-boot image from serial dataflash of at91rm9200dk. In do_bootm, the variable addr was pointing to the virtual address in dataflash, not to the copy in RAM. Patch was submitted to the sourceforge patch area, too. Peter Menzebach

2 1

[U-Boot-Users] [PATCH] Add JFFS2 support for TRAB board
by Martin Krause 06 Oct '05

06 Oct '05

Subject: [PATCH] Add JFFS2 support for TRAB board --- CHANGELOG | 3 +++ include/configs/trab.h | 24 ++++++++++++++++++++---- 2 files changed, 23 insertions(+), 4 deletions(-) 50a9addde722baec91dd20427f52502ea13e29a3 diff --git a/CHANGELOG b/CHANGELOG --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Add JFFS2 support for TRAB board + Patch by Martin Krause, 25 Aug 2005 + * Fixed Bamboo port to enable running without DDR-DIMM (Bamboo has also 64MB onboard DDR) Patch by Stefan Roese, 24 Aug 2005 diff --git a/include/configs/trab.h b/include/configs/trab.h --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -159,10 +159,11 @@ CFG_CMD_BSP | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_USB | \ CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + CFG_CMD_SNTP | \ + CFG_CMD_USB ) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CONFIG_COMMANDS_ADD_HWFLOW | \ @@ -172,10 +173,11 @@ CFG_CMD_BSP | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_USB | \ CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + CFG_CMD_SNTP | \ + CFG_CMD_USB ) #endif /* moved up */ @@ -377,6 +379,20 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 << 10) +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=0" + +/* production flash layout */ +#define MTDPARTS_DEFAULT "mtdparts=0:32k(Firmware1)ro," \ + "16k(Env1)," \ + "16k(Env2)," \ + "320k(Firmware2)ro," \ + "896k(Kernel)," \ + "5376k(Root-FS)," \ + "1408k(JFFS2)," \ + "-(VFD)" + /*----------------------------------------------------------------------- * FLASH and environment organization */ TQ-Systems GmbH Mühlstraße 2, Gut Delling, 82229 Seefeld Tel. +49 (8153) 93 08-157, Fax +49 (8153) 93 08-7157 martin.krause(a)tqs.de www.tq-group.com

2 1

[U-Boot-Users] netconsole.c requires CONFIG_NET_MULTI?
by Marcus Hall 06 Oct '05

06 Oct '05

Is there any reason that netconsole.c requires CONFIG_NET_MULTI to run? I didn't see any dependency, and I removed the check and all seems good. Is there something that I am missing? Thanks! Marcus Hall marcushall(a)lucent.com *** ../u-boot-1.1.3/drivers/netconsole.c Sat Aug 13 17:53:35 2005 --- u-boot/drivers/netconsole.c Wed Aug 24 10:36:33 2005 *************** *** 29,38 **** #include <devices.h> #include <net.h> - #ifndef CONFIG_NET_MULTI - #error define CONFIG_NET_MULTI to use netconsole - #endif - static char input_buffer[512]; static int input_size = 0; /* char count in input buffer */ static int input_offset = 0; /* offset to valid chars in input buffer */ --- 29,34 ----

2 1

[U-Boot-Users] [PATCH 5/5][RESEND] CSB 637 board support
by Anders Larsen 06 Oct '05

06 Oct '05

Hi, the attached patch adds support for the Cogent csb637 board. Patch gzip'ed due to size. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Add support for the Cogent csb637 board --- MAKEALL | 10 Makefile | 3 README | 15 board/csb637/Makefile | 46 + board/csb637/config.mk | 1 board/csb637/csb637.c | 83 + board/csb637/u-boot.lds | 56 + cpu/arm920t/at91rm9200/Makefile | 2 cpu/arm920t/at91rm9200/bcm5221.c | 232 ++++ include/asm-arm/mach-types.h | 2319 +++++++++++++++++++++++++++++++++++++- include/bcm5221.h | 104 ++ include/configs/csb637.h | 235 ++++ 12 files changed, 3058 insertions(+), 48 deletions(-)

2 3

[U-Boot-Users] [PATCH 1/5][RESEND] CSB637 - add KB920x support
by Anders Larsen 06 Oct '05

06 Oct '05

Hi, the patch below adds support for the KwikByte KB920x boards. I resend it (refreshed) since it is touched by the next patch in the series. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Matt <james(a)kwikbyte.com>, 2005-04-27 Add support for the KwikByte KB920x boards --- MAKEALL | 8 +- Makefile | 3 + README | 8 +- board/kb9202/Makefile | 49 ++++++++++ board/kb9202/config.mk | 1 board/kb9202/kb9202.c | 66 +++++++++++++ board/kb9202/lxt972.c | 211 ++++++++++++++++++++++++++++++++++++++++++ board/kb9202/u-boot.lds | 56 +++++++++++ cpu/arm920t/at91rm9200/i2c.c | 4 + include/configs/kb9202.h | 173 ++++++++++++++++++++++++++++++++++ 10 files changed, 571 insertions(+), 8 deletions(-) diff --git a/MAKEALL b/MAKEALL --- a/MAKEALL +++ b/MAKEALL @@ -167,10 +167,10 @@ LIST_ARM7="B2 ep7312 evb4510 impa7 modne LIST_ARM9=" \ at91rm9200dk cmc_pu2 integratorcp integratorap \ - lpd7a400 mx1ads mx1fs2 omap1510inn \ - omap1610h2 omap1610inn omap730p2 scb9328 \ - smdk2400 smdk2410 trab VCMA9 \ - versatile voiceblue \ + kb9202 lpd7a400 mx1ads mx1fs2 \ + omap1510inn omap1610h2 omap1610inn omap730p2 \ + scb9328 smdk2400 smdk2410 trab \ + VCMA9 versatile voiceblue \ " ######################################################################### diff --git a/Makefile b/Makefile --- a/Makefile +++ b/Makefile @@ -1390,6 +1390,9 @@ integratorap_config : unconfig integratorcp_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs integratorcp +kb9202_config : unconfig + @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + lpd7a400_config \ lpd7a404_config: unconfig @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x diff --git a/README b/README --- a/README +++ b/README @@ -305,10 +305,10 @@ The following options need to be configu CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, - CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_VCMA9 + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400 + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, + CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------ diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile new file mode 100644 --- /dev/null +++ b/board/kb9202/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Adapted for KwikByte KB920x boards - APR2005 +# +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := kb9202.o lxt972.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk new file mode 100644 --- /dev/null +++ b/board/kb9202/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000 diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c new file mode 100644 --- /dev/null +++ b/board/kb9202/kb9202.c @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board from at91rm9200dk.c: 22APR2005 + */ + +#include <common.h> +#include <asm/arch/AT91RM9200.h> + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +void lowlevel_init(void) { + /* Required by assembly functions - do nothing */ +} + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Enable Ctrlc */ + console_init_f (); + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + gd->bd->bi_arch_number = MACH_TYPE_KB9200; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff --git a/board/kb9202/lxt972.c b/board/kb9202/lxt972.c new file mode 100644 --- /dev/null +++ b/board/kb9202/lxt972.c @@ -0,0 +1,211 @@ +/* + * + * (C) Copyright 2003 + * Author : Hamid Ikdoumi (Atmel) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board: 22APR2005 + */ + +#include <at91rm9200_net.h> +#include <net.h> +#include <lxt971a.h> + +#ifdef CONFIG_DRIVER_ETHER + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +/* + * Name: + * lxt972_IsPhyConnected + * Description: + * Reads the 2 PHY ID registers + * Arguments: + * p_mac - pointer to AT91S_EMAC struct + * Return value: + * TRUE - if id read successfully + * FALSE- if error + */ +static unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac) +{ + unsigned short Id1, Id2; + + at91rm9200_EmacEnableMDIO (p_mac); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID1, &Id1); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_ID2, &Id2); + at91rm9200_EmacDisableMDIO (p_mac); + + if ((Id1 == (0x0013)) && ((Id2 & 0xFFF0) == 0x78E0)) + return TRUE; + + return FALSE; +} + +/* + * Name: + * lxt972_GetLinkSpeed + * Description: + * Link parallel detection status of MAC is checked and set in the + * MAC configuration registers + * Arguments: + * p_mac - pointer to MAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac) +{ + unsigned short stat1; + + if (!at91rm9200_EmacReadPhy (p_mac, PHY_LXT971_STAT2, &stat1)) + return FALSE; + + if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link status up? */ + return FALSE; + + if (stat1 & PHY_LXT971_STAT2_100BTX) { + + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + + /*set Emac for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + } else { + + /*set Emac for 100BaseTX and Half Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_SPD; + } + + return TRUE; + + } else { + + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + } else { + + /*set MII for 10BaseT and Half Duplex */ + p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD); + } + + return TRUE; + } + + return FALSE; +} + + +/* + * Name: + * lxt972_InitPhy + * Description: + * MAC starts checking its link by using parallel detection and + * Autonegotiation and the same is set in the MAC configuration registers + * Arguments: + * p_mac - pointer to struct AT91S_EMAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac) +{ + UCHAR ret = TRUE; + unsigned short IntValue = 0; + + at91rm9200_EmacEnableMDIO (p_mac); + + if (!lxt972_GetLinkSpeed (p_mac)) { + /* Try another time */ + ret = lxt972_GetLinkSpeed (p_mac); + } + + /* Disable PHY Interrupts */ + at91rm9200_EmacWritePhy (p_mac, PHY_LXT971_INT_ENABLE, 0); + + at91rm9200_EmacDisableMDIO (p_mac); + + return (ret); +} + + +/* + * Name: + * lxt972_AutoNegotiate + * Description: + * MAC Autonegotiates with the partner status of same is set in the + * MAC configuration registers + * Arguments: + * dev - pointer to struct net_device + * Return value: + * TRUE - if link status set successfully + * FALSE - if link status not set + */ +static UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status) +{ + unsigned short value; + unsigned short PhyAnalpar; + + /* Set lxt972 control register */ + if (!at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_CTRL, &value)) + return FALSE; + + /* Restart Auto_negotiation */ + value |= PHY_COMMON_CTRL_RES_AUTO; + if (!at91rm9200_EmacWritePhy (p_mac, PHY_COMMON_CTRL, &value)) + return FALSE; + + /*check AutoNegotiate complete */ + udelay (10000); + at91rm9200_EmacReadPhy (p_mac, PHY_COMMON_STAT, &value); + if (!(value & PHY_COMMON_STAT_AN_COMP)) + return FALSE; + + return (lxt972_GetLinkSpeed (p_mac)); +} + + +/* + * Name: + * at91rm92000_GetPhyInterface + * Description: + * Initialise the interface functions to the PHY + * Arguments: + * None + * Return value: + * None + */ +void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops) +{ + p_phyops->Init = lxt972_InitPhy; + p_phyops->IsPhyConnected = lxt972_IsPhyConnected; + p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed; + p_phyops->AutoNegotiate = lxt972_AutoNegotiate; +} + +#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/board/kb9202/u-boot.lds b/board/kb9202/u-boot.lds new file mode 100644 --- /dev/null +++ b/board/kb9202/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm920t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c --- a/cpu/arm920t/at91rm9200/i2c.c +++ b/cpu/arm920t/at91rm9200/i2c.c @@ -64,10 +64,14 @@ at91_xfer(unsigned char chip, unsigned i twi->TWI_MMR = (chip << 16) | (alen << 8) | ((rw == 1) ? AT91C_TWI_MREAD : 0); +#ifdef CONFIG_KB920x + twi->TWI_IADR = addr; +#else /* Set TWI Internal Address Register with first messages data field */ /* only one address byte is supported */ if (alen > 0) twi->TWI_IADR = addr & 0xff; +#endif length = len; buf = buffer; diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h new file mode 100644 --- /dev/null +++ b/include/configs/kb9202.h @@ -0,0 +1,173 @@ +/* + * Rick Bronson <rick(a)efn.org> + * + * Configuation settings for the AT91RM9200DK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */ +#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ +/* Only define one of the following, based on board type */ +/* #define CONFIG_KB9200 1 KwikByte KB9202 board */ +/* #define CONFIG_KB9201 1 KwikByte KB9202 board */ +#define CONFIG_KB9202 1 /* KwikByte KB9202 board */ + +#define CONFIG_KB920x 1 /* Any KB920x board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define USE_920T_MMU 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CFG_LONGHELP + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +#define CONFIG_BAUDRATE 115200 + +/* + * Hardware drivers + */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_DBGU +#undef CONFIG_USART0 +#undef CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_I2C | \ + CFG_CMD_PING | \ + CFG_CMD_DHCP ) & \ + ~(CFG_CMD_BDI | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024) + +#define CONFIG_DRIVER_ETHER +#define CONFIG_NET_RETRY_COUNT 20 + +#define CFG_FLASH_BASE 0x10000000 + +#ifdef CONFIG_KB9202 +#define PHYS_FLASH_SIZE 0x1000000 +#else +#define PHYS_FLASH_SIZE 0x200000 +#endif + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CONFIG_HARD_I2C + +#define CFG_ENV_IS_IN_EEPROM + +#ifdef CONFIG_KB9202 +#define CFG_ENV_OFFSET 0x3000 +#define CFG_ENV_SIZE 0x1000 +#else +#define CFG_ENV_OFFSET 0x1000 +#define CFG_ENV_SIZE 0x1000 +#endif +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0 /* not used */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI + +#ifndef __ASSEMBLY__ +/*----------------------------------------------------------------------- + * Board specific extension for bd_info + * + * This structure is embedded in the global bd_info (bd_t) structure + * and can be used by the board specific code (eg board/...) + */ + +struct bd_info_ext { + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; +}; +#endif + +#define CFG_HZ 1000 +#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif

6 15

[U-Boot-Users] Re: Bdi and u-boot
by Srivatsan CR 06 Oct '05

06 Oct '05

Hi, Check whether you have commneted the memory initialization part in your BDI configuration file. In the BDI configuration file, init memory controller and init SDRAM should be commented and also comment the IMMR initialization while debugging u-boot code. If proper address of IMMR [address is configured by HRCW] is not got, the board might be receiving a Watchdog reset, which by default is set. Hope this helps. With Regards, C.R.Srivatsan

2 1

[U-Boot-Users] Debugging U-Boot on arm920t using BDI2000
by Ioritz Irazustabarrena Murgiondo 05 Oct '05

05 Oct '05

Hello, I am developing a custom board with motorola's MX1 processor. I have compiled U-Boot successfully for MX1ADS evaluation board (it has SyncFlash instead of flash), and this hardware isn't very different from mine (only difference is flash). I have studied the README and carried out the porting as it is specified, but U-Boot doesn't work, or I don't get anything in serial console. I'm using BDI2000, and when I try to debug U-Boot the code hangs in relocate function in start.S file. The exact instruction that hangs the gdb is: "sub r2, r3, r2 /* r2 <- size of u-boot */" 1- One problem is that I don't see how the general purpose registers (r0, r1...) values change, i.e. when "ldr r0, _start" is executed, r0 doesn't change, is this normal? (Is it possible to debug start.S with BDI2000?) When I compile the code,there are no errors or warnings, but a UNDEF_SYM appears: ... make[1]: Leaving directory `/home/iim/IKOR/LinuxEmpotrado/LinCon/\ build_tools/u-boot/u-boot-1.1.3/common' UNDEF_SYM=`arm-unknown-linux-gnu-objdump -x lib_generic/libgeneric.a \ board/LinCon/libLinCon.a cpu/arm920t/libarm920t.a cpu/arm920t/imx/libimx.a \ lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a \ fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a \ disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a \ post/libpost.a post/cpu/libcpu.a common/libcommon.a |sed -n -e \ 's/.*$__u_boot_cmd_.*$/-u\1/p'|sort|uniq`;\ arm-unknown-linux-gnu-ld -Bstatic -T \ /home/iim/IKOR/LinuxEmpotrado/LinCon/build_tools/u-boot/u-boot-1.1.3/board/LinCon/u-boot.lds \ -Ttext 0x08f00000 $UNDEF_SYM cpu/arm920t/start.o \ ... 2- When I compile u-boot for my Evaluation Board (MX1ADS), this UNDEF_SYM appears, but u-boot works without any problem! Is this a problem, or only a "warning"? Some configuration parameters: 32MB SDRAM -> 0x08000000-0x0A000000 16MB Flash -> 0x10000000-0x11000000 TEXT_BASE=0x08f00000 (board/<board>/config.mk) CFG_MONITOR_BASE=0x10000000 /* flash base addr */(include/configs/<board>.h) CFG_MONITOR_LEN=0x20000 (include/configs/<board>.h) CFG_LOAD_ADDR=0x08f00000 (include/configs/<board>.h) arm-linux-objdump -h displays: #arm-unknown-linux-gnu-objdump -h u-boot u-boot: file format elf32-littlearm Sections: Idx Name Size VMA LMA File off Algn 0 .text 00012f34 08f00000 08f00000 00008000 2**5 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .glue_7 00000000 08f12f34 08f12f34 0001af34 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .glue_7t 00000000 08f12f34 08f12f34 0001af34 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 3 .rodata 00000568 08f12f34 08f12f34 0001af34 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 4 .rodata.str1.4 000042b3 08f1349c 08f1349c 0001b49c 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 5 .data 00000933 08f17750 08f17750 0001f750 2**2 CONTENTS, ALLOC, LOAD, DATA 6 .u_boot_cmd 00000378 08f18084 08f18084 00020084 2**2 CONTENTS, ALLOC, LOAD, DATA 7 .bss 00001c2c 08f183fc 08f183fc 000203fc 2**2 ALLOC 8 .stab 00000c90 00000000 00000000 000203fc 2**2 CONTENTS, READONLY, DEBUGGING 9 .stabstr 0000017d 00000000 00000000 0002108c 2**0 CONTENTS, READONLY, DEBUGGING 10 .debug_abbrev 000062dd 00000000 00000000 00021209 2**0 CONTENTS, READONLY, DEBUGGING 11 .debug_info 0003bcf1 00000000 00000000 000274e6 2**0 CONTENTS, READONLY, DEBUGGING 12 .debug_line 00009f00 00000000 00000000 000631d7 2**0 CONTENTS, READONLY, DEBUGGING 13 .debug_frame 00002f6c 00000000 00000000 0006d0d8 2**2 CONTENTS, READONLY, DEBUGGING 14 .debug_pubnames 00001845 00000000 00000000 00070044 2**0 CONTENTS, READONLY, DEBUGGING 15 .debug_aranges 000005a0 00000000 00000000 00071889 2**0 CONTENTS, READONLY, DEBUGGING 16 .debug_str 00003df0 00000000 00000000 00071e29 2**0 CONTENTS, READONLY, DEBUGGING 17 .comment 0000033c 00000000 00000000 00075c19 2**0 CONTENTS, READONLY 18 .debug_ranges 00000288 00000000 00000000 00075f55 2**0 CONTENTS, READONLY, DEBUGGING Any help will be welcomed!! Thanks in advance. Ioritz

2 1

[U-Boot-Users] [PATCH 4/5][RESEND] CSB637 - set asynchronous clock mode
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the patch below selects AT91RM9200 asynchronous clock mode which improves the execution speed by a factor of ~4. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-05-03 Set AT91RM9200 asynchronous clocking mode --- cpu/arm920t/at91rm9200/lowlevel_init.S | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -123,6 +123,11 @@ LoopOsc: cmp r2, r0 bne 2b + /* switch from FastBus to Asynchronous Clocking Mode */ + mrc p15, 0, r0, c1, c0, 0 + orr r0, r0, #0xC0000000 @ set bit 31 (iA) and 30 (nF) + mcr p15, 0, r0, c1, c0, 0 + /* everything is fine now */ mov pc, lr

2 2

[U-Boot-Users] [PATCH 3/5][RESEND] CSB637 - fix dm9161 PHY interrupt mask
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the patch below fixes a bug in the dm9161 interrupt masking; a bit set /disables/ (masks) the interrupt. Furthermore, the PHY is explicitly (re)connected when auto- negotiation is started. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Mask DM9161 interrupts correctly --- cpu/arm920t/at91rm9200/dm9161.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/cpu/arm920t/at91rm9200/dm9161.c b/cpu/arm920t/at91rm9200/dm9161.c --- a/cpu/arm920t/at91rm9200/dm9161.c +++ b/cpu/arm920t/at91rm9200/dm9161.c @@ -138,9 +138,9 @@ UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac) /* Disable PHY Interrupts */ at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue); - /* clear FDX, SPD, Link, INTR masks */ - IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK | - DM9161_LINK_MASK | DM9161_INTR_MASK); + /* set FDX, SPD, Link, INTR masks */ + IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK | + DM9161_LINK_MASK | DM9161_INTR_MASK); at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue); at91rm9200_EmacDisableMDIO (p_mac); @@ -190,6 +190,7 @@ UCHAR dm9161_AutoNegotiate (AT91PS_EMAC return FALSE; /* Restart Auto_negotiation */ value |= DM9161_RESTART_AUTONEG; + value &= ~DM9161_ISOLATE; if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) return FALSE;

2 2

[U-Boot-Users] [PATCH 2/5][RESEND] CSB637 - move PHY code to common directory
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, the attached patch moves the at91rm9200 PHY code from the board specific directories into cpu/arm920t/at91rm9200 to avoid excess code duplication. Patch gzip'ed due to size. Cheers Anders Signed-off-by: Anders Larsen <alarsen(a)rea.de> CHANGELOG: Patch by Anders Larsen <alarsen(a)rea.de>, 2005-04-29 Move the AT91RM9200 PHY code into a common directory --- board/at91rm9200dk/Makefile | 2 board/at91rm9200dk/at91rm9200dk.c | 26 ++++ board/at91rm9200dk/dm9161.c | 243 ------------------------------------- board/cmc_pu2/Makefile | 2 board/cmc_pu2/cmc_pu2.c | 26 ++++ board/cmc_pu2/dm9161.c | 243 ------------------------------------- board/kb9202/Makefile | 2 board/kb9202/kb9202.c | 33 +++++ board/kb9202/lxt972.c | 211 -------------------------------- cpu/arm920t/at91rm9200/Makefile | 2 cpu/arm920t/at91rm9200/dm9161.c | 224 ++++++++++++++++++++++++++++++++++ cpu/arm920t/at91rm9200/ether.c | 2 cpu/arm920t/at91rm9200/lxt972.c | 192 +++++++++++++++++++++++++++++ include/at91rm9200_net.h | 2 include/dm9161.h | 8 + 15 files changed, 510 insertions(+), 708 deletions(-)

2 2

[U-Boot-Users] Valid Addresses-pxa270
by Swapnil Ashok Narkhede 05 Oct '05

05 Oct '05

Hi, I am now trying to load MontaVista Linux OS on to the pxa270 of Mainstone 2 board. The memory map for PXA270 is 0xA000_0000->SDRAM Partition 3 (64 Mbyte) 0xA400_0000->SDRAM Partition 2 (64 Mbyte) 0xA800_0000->SDRAM Partition 1 (64 Mbyte) 0xAC00_0000->SDRAM Partition 0 (64 Mbyte) When i make uImage i specify the load address and entry point address as 0xa0008000 respectively. I load the OS image into FLASH at 0x00040000. I issue command bootm 0x00040000 for the execution of the OS image. But i get to "Starting Kernel ..." and the system hangs. I know this is the state when we donot specify appropriate load address and entry point addresses. But as per the memory map that is specified the load and entry point addresses i specified seems to be proper. Please let me know if this seems to be improper addresses or what else could be the cause for this. Eagerly awaiting your reply. Regards, Swapnil Narkhede Mob:- 0432025023 Email:- s3092131(a)student.rmit.edu.au School of Computer Science and Information Technology RMIT University, Melbourne

1 0

Re: [U-Boot-Users] Re: BDI and u-boot
by KokHow Teh 05 Oct '05

05 Oct '05

> ... >(gdb) ni ><signal handler called> >(gdb) disassemble >Dump of assembler code for function boot_cold: >0xfff00118 <boot_cold+0>: lis r3,3841 >0xfff0011c <boot_cold+4>: nop >0xfff00120 <boot_cold+8>: lwz r4,0(r3) >0xfff00124 <boot_cold+12>: nop >(gdb) ni >Cannot access memory at address 0x3b87018 >(gdb) info program >Debugging a target over a serial line. >Program stopped at 0xfff00124. >It stopped with signal SIGTRAP, Trace/breakpoint trap. >(gdb) >I have discovered that if I use IMMR from default config for BDI >WM32 0x0F0101A8 0x04700000 ;IMMR : internal space @ 0x04700000 >... >then on 'ti' or 'go' it resetting after only a few commands (see above). >If I comment the IMMR in ads8272.cfg (BDI config) then I can debug >through BDI or gdb. It resets as expected. BDI changes the IMMR from the HRCW to 0x04700000 and the u-boot code snippet shown is accessing address 3841 which is 0x0F010000 in hex which is no longer there....

2 1

[U-Boot-Users] Re-submission of patches
by Peter Pearse 05 Oct '05

05 Oct '05

Wolfgang Sorry - I should have read to the end of your CVS activity before replying.... I see you have now considered/applied/rejected all my patches to date. Some session ;-) I'll spend some time considering the results before re-submitting against the rejects. Regards Peter Pearse ------------------------------------------------------------------------- Peter Pearse ARM Ltd Software Engineer 110 Fulbourn Road Embedded Software Division Cambridge Direct line: +44 (0)1223 400812 CB19NJ Fax: +44 (0)1223 400410 United Kingdom ------------------------ Peter.Pearse(a)arm.com ------------------------- This e-mail message is intended for the addressee(s) only and may contain information that is the property of, and/or subject to a confidentiality agreement between the intended recipient(s), their organisation and/or the ARM Group of Companies. If you are not an intended recipient of this e-mail message,you should not read, copy, forward or otherwise distribute or further disclose the information in it; misuse of the contents of this e-mail message may violate various laws in your state , country or jurisdiction. If you have received this e-mail message in error, please contact the originator of this e-mail message via e-mail and delete all copies of this message from your computer and/or network. Thank you.

2 1

Re: [U-Boot-Users] [PATCH] Flash HRCW for MPC8272ADS
by Wolfgang Denk 05 Oct '05

05 Oct '05

In message <1113228066.425a8322051b2@webmail.televes.com:443> you wrote: > > This patch adds HRCW for Flash Lowboot support on Freescale MPC8272ADS board. > This extends the recently applied patches for PQ2ADS lowboot from Jerry Van > Baren to this board. Sorry, but your patch is broken: > +#if CONFIG_ADSTYPE == CFG_8272ADS > +/* MPC8272ADS Flash HRCW 0x0E74B20A */ > +#define CFG_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ > + ( HRCW_L2CPC01 | HRCW_DPPC11 | HRCW_ISB100 ) > |\ ^^^^^ Your mailer garbled and wrapped lines; please resubmit if still needed. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de When you say "I wrote a program that crashed Windows", people just stare at you blankly and say "Hey, I got those with the system, *for free*". - Linus Torvalds in <3itc77$9lj(a)ninurta.fer.uni-lj.si>

2 1

RE: [U-Boot-Users] [Patch]
by Peter Pearse 05 Oct '05

05 Oct '05

Wolfgang Denk wrote: >> >> CHANGELOG: >> * Patch by Peter Pearse, 11 Apr 2005 >> - add core module targets for integratorap, integratorcp >> - add ARM946E cpu support >> - remap SSRAM memory to 0x00000000 > > Most of this patch does not apply any more. Skipped. Please resubmit > any parts that are still missing in the current code. > Re-submitted as patches with my reference number:- 002 Patch submitted 29th Sept 2005 Ensure Integrator boards call platformsetup() rather than lowlevel_init() 003 Patch submitted 29th Sept 2005 Provide Makefile targets for all ARM supported development boards 005 Patch submitted 4th Oct 2005 Split off common core module data Regards Peter Pearse

1 0

Re: [U-Boot-Users] BDI and u-boot
by KokHow Teh 05 Oct '05

05 Oct '05

Hi; Try `ti` instead of `go` to see where it resets. Dmytro Bablinyuk <dmytro.bablinyuk(a)rftechnology.com.au>@lists.sourceforge.net on 10/05/2005 10:35:58 AM Sent by: u-boot-users-admin(a)lists.sourceforge.net To: u-boot-users(a)lists.sourceforge.net cc: Subject: [U-Boot-Users] BDI and u-boot Can anyone please give me advice on the following: U-boot was burnt at 0xfff00000 (.TEXT) and starts successfully whenever I disconnect BDI2000 and power cycle our MPC8272ADS. Without BDI it starts without any problems. But when I try to debug using BDI board keeps restarting: 8272>reset - TARGET: processing user reset request - BDI asserts HRESET ... 8272>info Target CPU : MPC8280/8220/5200 (Zeppo) Target state : debug mode Debug entry cause : instruction address breakpoint Current PC : 0xfff00100 Current CR : 0x00000000 Current MSR : 0x00001002 Current LR : 0x00000000 8272>go *** TARGET: reset detected, restarting target - BDI asserts HRESET ... Reset entry point is at offset 0x100 so in fact 'go' does "go 0xfff00100" from my understanding, but why is it keep resetting? No serial output produced. The map file .text 0xfff00000 0x2ec14 cpu/mpc8260/start.o(.text) .text 0xfff00000 0x3560 cpu/mpc8260/start.o 0xfff001b0 _start_of_vectors 0xfff03178 init_8260_core 0xfff032ac dcache_enable 0xfff03314 relocate_code 0xfff00000 _hrcw_table 0xfff0324c icache_enable ... What do I miss? Thank you, Dimitry ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

2 1

[U-Boot-Users] BDI and u-boot
by Dmytro Bablinyuk 05 Oct '05

05 Oct '05

Can anyone please give me advice on the following: U-boot was burnt at 0xfff00000 (.TEXT) and starts successfully whenever I disconnect BDI2000 and power cycle our MPC8272ADS. Without BDI it starts without any problems. But when I try to debug using BDI board keeps restarting: 8272>reset - TARGET: processing user reset request - BDI asserts HRESET ... 8272>info Target CPU : MPC8280/8220/5200 (Zeppo) Target state : debug mode Debug entry cause : instruction address breakpoint Current PC : 0xfff00100 Current CR : 0x00000000 Current MSR : 0x00001002 Current LR : 0x00000000 8272>go *** TARGET: reset detected, restarting target - BDI asserts HRESET ... Reset entry point is at offset 0x100 so in fact 'go' does "go 0xfff00100" from my understanding, but why is it keep resetting? No serial output produced. The map file .text 0xfff00000 0x2ec14 cpu/mpc8260/start.o(.text) .text 0xfff00000 0x3560 cpu/mpc8260/start.o 0xfff001b0 _start_of_vectors 0xfff03178 init_8260_core 0xfff032ac dcache_enable 0xfff03314 relocate_code 0xfff00000 _hrcw_table 0xfff0324c icache_enable ... What do I miss? Thank you, Dimitry

1 0

[U-Boot-Users] have someone compile u-boot for mips with sde toolchains?
by zhuzhenhua 05 Oct '05

05 Oct '05

If i use eldk toolchain, it run well,but if i use sde toolchain(modify the CROSS_COMPILE to sde),it give out error messages that mips-linux-as command not founded. is there other configuration need to modify ?

1 0

[U-Boot-Users] [PATCH 4/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch switches the at91rm9200 to asynchronous clocking mode after initialization (it would otherwise stay in FastBus mode which is the _slowest_ clock mode). This lets the core run at full speed when not doing bus accesses, increasing overall performance by a factor of four. The performance difference between asynchronous ans synchronous clocking mode as measured with nbench 2.2.2 disappears in the statistical noise; since asynchronous clocking mode imposes less restrictions on the clock frequencies it is the mode of choice. This patch replaces my similar patch from 2005-04-29. Changelog: * patch by Anders Larsen, 2005-05-03 set the at91rm9200 to asynchronous clocking mode Cheers Anders

2 1

[U-Boot-Users] [PATCH 4/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch switches the at91rm9200 to synchronous clock mode after initialization (it would otherwise stay in FastBus mode which is the _slowest_ clock mode). This lets the core run at full speed when not doing bus accesses, increasing overall performance by a factor of four. Changelog: * patch by Anders Larsen, 2004-04-29 set the at91rm9200 clock to synchronous mode Cheers Anders

3 3

[U-Boot-Users] [PATCH 3/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch adds basic support for the Cogent csb637 AT91RM9200-based board. This implementation loads u-boot directly from NOR flash and does not support dataflash, CF, MMC. The on-board LCD controller is not supported (yet). The configuration matches the version I got, that is, 8MiB of CFI flash and 64MiB of SDRAM (the board is available with other memory options, too). Changelog: * patch by Anders Larsen, 2004-04-29 add support for Cogent csb637 Cheers Anders

2 1

[U-Boot-Users] [PATCH 2/4] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch fixes two bugs in dm9161.c; - in dm9161_InitPhy the interrupts were enabled instead of disabled - in dm9161_AutoNegotiate the PHY was disconnected from the wire and never re-connected (it seems this function is never called). Changelog: * patch by Anders Larsen, 2005-04-29 fix dm9161.c initialization Cheers Anders

2 1

[U-Boot-Users] [PATCH 1/4][RESEND] add csb637 (at91rm9200) support
by Anders Larsen 05 Oct '05

05 Oct '05

Hi, this patch moves the implementation of the DM9161 PHY from the board directories into cpu/arm920t/at91rm9200 (patch gzip'ed due to size) Rationale: The code in question (dm9161.c) is used by two boards, namely the at91rm9200dk and the cmc_pu2; the source file in question was present (identically) in both board-specific directories. I didn't move it into the global drivers directory, since the code is at91rm9200-specific. The patch patch also moves lxt972.c from board/kb9202 accordingly, see pending patch from 2005-04-27 "KB920x initial patch..." Changelog: * patch by Anders Larsen, 2005-04-29 move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 Cheers Anders

2 1

[U-Boot-Users] [PATCH]: Fix partition initialization for SystemACE
by Stephen Williams 05 Oct '05

05 Oct '05

This patch seems to have gotten lost in the frey. It properly initializes the partition table structure for SystemACE devices. Without it, partition commands to not work properly. CHANGELOG * Patch by Stephen Williams, 28 April 2005 Properly intialize the device partition structure for SystemACE disks. -- Steve Williams "The woods are lovely, dark and deep. steve at icarus.com But I have promises to keep, http://www.icarus.com and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep."

3 3

[U-Boot-Users] patch submission info
by kb_admin 05 Oct '05

05 Oct '05

Greetings, Can someone please tell me the appropriate list to which I should submit the diffs/patch file for new board support? Thank you in advance, Matt kb9200_dev(a)kwikbyte.com

3 6

[U-Boot-Users] PATCH: Point e500 IVPR at memory during code relocation
by Kylo Ginsberg 05 Oct '05

05 Oct '05

Hello, Please consider the following e500-specific patch, which reloads the IVPR to point at ram when code is relocated to ram. The IVPR assumes 64KB alignment, so code is copied to a 64K aligned region. * Patch by Kylo Ginsberg, 13 Apr 2005: - repoint IVPR at ram when code is relocated Thanks, Kylo

2 1

[U-Boot-Users] fix patch u-boot/lib_generic string.c,1.4,1.5
by Andrew Dyer 04 Oct '05

04 Oct '05

The patch for lib_generic/string.c:strswab() from cvs rev. 1.4 to 1.5 is a bit different than what I sent in. Attached is an update. CHANGELOG *fix loop end test in lib_generic/string.c:strswab() Patch by Andrew Dyer, October 10, 2005 Signed-off-by: Andrew Dyer <amdyer(a)gmail.com> Index: lib_generic/string.c =================================================================== RCS file: /home/cvsroot/Projects/u-boot/lib_generic/string.c,v retrieving revision 1.1.1.2 retrieving revision 1.3 diff -p -u -r1.1.1.2 -r1.3 --- lib_generic/string.c 4 Oct 2005 14:15:53 -0000 1.1.1.2 +++ lib_generic/string.c 4 Oct 2005 15:00:44 -0000 1.3 @@ -380,7 +380,7 @@ char *strswab(const char *s) return (NULL); } - for (p=(char *)s, q=p+1; (*p != '\0') && (*p != '\0'); p+=2, q+=2) { + for (p=(char *)s, q=p+1; (*p != '\0') && (*q != '\0'); p+=2, q+=2) { char tmp; tmp = *p; -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] [PATCH] ARM supplied & supported development boards. Errata & rationalization - corrected patch
by Peter Pearse 04 Oct '05

04 Oct '05

Attached (diff -purN) patch against the GIT head code of 4th October 2005. This replaces yesterday's patch which broke CONFIG_SMC91111_BASE. Apologies for any inconvenience caused. CHANGELOG * Patch 005 by Peter Pearse <peter.pearse(a)arm.com> 4th Oct 2005 Correct addessing errors in platform files. Split off common core module data from Integrator header files to include/armcoremodule.h. Valid patches are now: --------------------- 000 Patch submitted 30th June 2005 Import cc-option shell function from kernel Use it to get the correct ARM gcc options for individual cpus 002 Patch submitted 29th Sept 2005 Ensure Integrator boards call platformsetup() rather than lowlevel_init() 003 Patch submitted 29th Sept 2005 Provide Makefile targets for all ARM supported development boards 005 Patch submitted 4th Oct 2005 Split off common core module data Regards Peter Pearse

2 2

[U-Boot-Users] [PATCH] Makefile targets for ARM supported development boards.
by Peter Pearse 04 Oct '05

04 Oct '05

This gzipped patch shortens the configuration names of the Makefile targets for ARM supported developments boards and ensures all currently supported combinations of board and core module are supported. The patch was produced using cg-diff against branch based on commit fb34a9a20132216a47c9c91551cec3d7b4ebc0a3 of http://source.denx.net/git/u-boot.git CHANGELOG * Provide Makefile targets for all ARM supported development boards * Patch by Peter Pearse 29 Sept 2005 Regards Peter Pearse

2 1

[U-Boot-Users] [PATCH] Correction to previous patch of 26th Sept which broke other boards
by Peter Pearse 04 Oct '05

04 Oct '05

Correction to previous patch of 26th Sept which broke other boards - apologies to anyone affected. I was so embarassed I forgot to attach the patch - here it is. This patch replaces the arm920t.patch submitted on 26th Sept. The patch was produced using cg-diff against branch based on commit fb34a9a20132216a47c9c91551cec3d7b4ebc0a3 of http://source.denx.net/git/u-boot.git CHANGELOG * Ensure Integrator boards call platformsetup() rather than lowlevel_init() * Patch by Peter Pearse 29 Sept 2005 Regards Peter Pearse

2 2

[U-Boot-Users] [PATCH] Differing gcc version ARM options
by Peter Pearse 04 Oct '05

04 Oct '05

Hi Attached a bzipped patch file to fix the problems with different ARM options in different gcc versions. Patched against CVS head 30th June 2005. Tested with MAKEALL arm. CHANGELOG: * Patch by Peter Pearse, 30th June 2005 - Import cc-option shell function from kernel - Use it to get the correct ARM gcc options for individual cpus Replaces my earlier "[PATCH] Differing gcc version ARM options". ------------------------------------------------------------------------- Peter Pearse ARM Ltd

2 1

[U-Boot-Users] [Patch] CFI flash for ARM supplied & supported development boards
by Peter Pearse 04 Oct '05

04 Oct '05

The attached patch has been tested for building with MAKEALL arm. Patched code has been tested to boot linux & save environment with - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - Versatile AB926EJ-S. It provides CFI support for all ARM supplied ARM supported development boards i.e. http://www.arm.com/products/DevTools/VPB926EJ-S.html http://www.arm.com/products/DevTools/Applicationbaseboard.html http://www.arm.com/products/DevTools/IntegratorCP.html This protects against possible future flash component changes. Replaces the patch submitted on 2005-03-15. Patched against CVS head of 12 Apr 2005. > CHANGELOG: > * Patch by Peter Pearse, 12 Apr 2005 > Changes all ARM supplied development boards, supported by ARM, to use CFI flash. > Adds CFI support for the Versatile/AB926EJ-S. Please report any errors and/or omissions to ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] [Patch] Multicore patch for ARM supplied development boards.
by Peter Pearse 04 Oct '05

04 Oct '05

Hi Attached corrected multicore patch - somehow I lost the fact that the omap boards not yet migrated to using lowlevel_init. Please inform me of any defects found. CHANGELOG: * Patch by Peter Pearse, 12 Apr 2005 - add core module targets for integratorap, integratorcp - add ARM946E cpu support - remap SSRAM memory to 0x00000000 Notes ----- a) Provides targets for all supported Core Modules - targets are of the form integrator<type>_CM<id>_config Examples make integratorap_CM946E_S make integratorcp_CM920T_config b) Previous targets integegratorcp, integratorap retained. c) Tested to build with MAKEALL arm d) Tested to boot linux with - Integrator/CP CM920T - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - both Integrator combinations boot in all three settings - Manually run U-Boot in ARM Boot Monitor - Auto boot U-Boot through ARM Boot Monitor - Auto boot direct into U-Boot e) Patched against head at 12 Apr 2005 f) Replaces the patch submitted on 11 Apr 2005 ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] [Patch]
by Peter Pearse 04 Oct '05

04 Oct '05

Hi Attached remade multicore patch to allow users to specify the core module fitted to their ARM supplied Integrator development board. Please inform me of any defects found. CHANGELOG: * Patch by Peter Pearse, 11 Apr 2005 - add core module targets for integratorap, integratorcp - add ARM946E cpu support - remap SSRAM memory to 0x00000000 Notes ----- a) Provides targets for all supported Core Modules - targets are of the form integrator<type>_CM<id>_config Examples make integratorap_CM946E_S make integratorcp_CM920T_config b) Previous targets integegratorcp, integratorap retained. c) Tested to build with MAKEALL arm d) Tested to boot linux with - Integrator/CP CM920T - Integrator/CP CM926EJ-S - Versatile PB926EJ-S - both Integrator combinations boot in all three settings - Manually run U-Boot in ARM Boot Monitor - Auto boot U-Boot through ARM Boot Monitor - Auto boot direct into U-Boot e) Patched against head at 11 Apr 2005 f) Replaces the patch submitted on 02 Feb 2005 ------------------------ Peter.Pearse(a)arm.com -------------------------

3 2

[U-Boot-Users] Autobooting limitation on .3 ? : kernel 2.4 detect mac address unset after rebooting
by Mathieu Deschamps 04 Oct '05

04 Oct '05

It faults, I guess, because of bootd behavior. Explanation: (I've set bootcmd with my bootm command, and everything that's fine in my environnement (serverip, ethaddr, ..) and had a saveenv. ) * When I've finished updating my rootfs via tftpboot, I do a boot which does what bootcmd variable stores, that's to say, a bootm on a flash adr. Kernel is runing all right, see : . . eth0: Link now 100-FullDuplex eth0: AT91 ethernet at 0xfefbc000 int=24 100-FullDuplex (12:34:56:78:99:AA) eth0: Davicom 9196 PHY (Copper) . Then I can execute this command, all right : # ifconfig eth0 192.168.0.5 up && echo Ok || echo Ko Ok # * After this, on rebooting my board via a reboot command (or even with a pushbutton reset) to test autoboot functionnality on reboot, kernel starts but it seems it can't retrieve my mac addr. : . . eth0: Link now 100-FullDuplex eth0: AT91 ethernet at 0xfefbc000 int=24 100-FullDuplex (00:00:00:00:00:00) eth0: Davicom 9196 PHY (Copper) . So naturally I can't execute my ifconfig : # ifconfig eth0 192.168.0.5 up && echo Ok || echo Ko SIOCSIFFLAGS: Cannot assign requested address SIOCSIFFLAGS: Cannot assign requested address Ko # This is always reproductible, but never happens after my rootfs update. I've found a temp. solution : run a ping command on serverip or simply adding it to bootcmd like this : bootcmd=ping $(serverip);bootm 0x10020000 It seems "net commands" update environnement or something like that. If no net commands is executed before the boot/bootd command, then it could be a reason why kernel is fed with a left blank, wrong mac addr. value. Any ideas on more reliable way-to or better way to make it work ? Thanks in advance Mathieu Deschamps.

2 1

[U-Boot-Users] Replacing AT91 u-boot
by kentropy 04 Oct '05

04 Oct '05

Hello, I'm sorry but I am still facing to problems trying to replace the existing u-boot-0.3.2 with the latest 1.1.3 on a at91rm9200dk board. I built u.boot make at91rm9200dk_config make then I reomved R159 from the board and booted, then I sent loader.bin (found on Atmel website) then I send the just builded u-boot.bin but at this point the AT91 system freezes showing few random characters on the serial console. If I use the original u-boot.bin 0.3.2 everything is ok, what am I missing ? Thank you for your time ---- loader 1.0 (Aug 8 2003 - 12:01:07) XMODEM: Download U-BOOT C U-Boot downloaded successfully U-Boot 0.3.2 (Jun 24 2003 - 17:04:08) U-Boot code: 21F00000 -> 21F14160 BSS: -> 21F1FAEC DRAM Configuration: Bank #0: 20000000 32 MB Atmel: AT49BV1614A (16Mbit) Flash: 2 MB DataFlash:AT45DB642 Nb pages: 8192 Page Size: 1056 Size= 8650752 bytes Logical address: 0xC0000000 Uboot>

4 3

[U-Boot-Users] u-boot and gcc 4.0
by Dmytro Bablinyuk 04 Oct '05

04 Oct '05

I have noticed today that u-boot uses some techniques that were deprecated in 3.4.x and now removed in 4.0 (so I cannot just get source and compile it under 4.0) For example in u-boot/fs/jffs2/compr_rubin.c temp = *(++((u32 *) in)); compr_rubin.c:89: error: invalid lvalue in increment ... According to the gcc 4.0.0 changelog: --8<-- The cast-as-lvalue, conditional-expression-as-lvalue and compound-expression-as-lvalue extensions, which were deprecated in 3.3.4 and 3.4, have been removed. --8<-- Is there are any plans to support 4.0 compiler or shall I downgrade my compiler to 3.4.x version. I may try to fix such places but since I have another task such as get our board running I am quite afraid to introduce a new problems. Thank you Dimitry

2 1

[U-Boot-Users] how to support the lcd logo in u-boot?
by zhuzhenhua 04 Oct '05

04 Oct '05

if i want to support lcd logo, need i write a lcd.c in my board directory? is there some codes or structure can be reused?

2 3

Re: [U-Boot-Users] AT91 and u-boot tests
by kentropy 04 Oct '05

04 Oct '05

> > u-boot always configured and compiled "as is" for at91rm9200dk > > You are aware that you cannot use the same configuration for your > tests? I am doing the same, what is the difference between these command sequence to generate u-boot using 1.1.2 and 1.1.3 without doing any further setting? # make at91rm9200dk_config # make Should be the exactly the same > > u-boot-1.1.3 > > ------------ > > - running in ram : DOES NOT BOOT > > - stored in flash with boot.bin as pre-loader > > and then u-boot as bootloader : DOES NOT BOOT > > - stored in flash as unique bootloader : OK BUT FAILS KERNEL UNCOMPRESSION > > > Your message is not helpful as it is totally unclear if you change > the configuration (i. e. with or without CONFIG_SKIP_LOWLEVEL_INIT > and/or CONFIG_SKIP_RELOCATE_UBOOT #defined in your cofiguration which > is *essential*. Please make sure to read the documentation (README). A quick watch to lowlevel_init.S shows that something low level is done here too ;-) However CONFIG_SKIP_LOWLEVEL_INIT and/or CONFIG_SKIP_RELOCATE_UBOOT are not set as default for at91-dk, so why version 1.1.3 (and only this version) doesn't run in ram? P.S. Manual read ;-) http://www.denx.de/twiki/bin/view/DULG/CanUBootBeConfiguredSuchThatItCanBeS…

2 1

[U-Boot-Users] AT91 and u-boot tests
by Marco Cavallini 03 Oct '05

03 Oct '05

Reading the AT91 related thread I digged a bit and maybe I found something strange between u-boot-1.1.2 and 1.1.3 ? I usually use u-boot-1.1.2 using the "usual Atmel procedure"(TM) I removed T159 and booted, loading loader.bin in ram with xmodem, then it asked for the next file u-boot.bin that has been succesfully loaded. If I use u-boot-1.1.2 all is OK as with preinstalled 0.3.2 This is the result of my tests: Board AT91RM9200DK Kernel 2.6.13.2 u-boot always configured and compiled "as is" for at91rm9200dk u-boot-1.1.2 ------------ - running in ram : OK - stored in flash with boot.bin as pre-loader and then u-boot as bootloader : OK - stored in flash as unique bootloader : DOES NOT BOOT u-boot-1.1.3 ------------ - running in ram : DOES NOT BOOT - stored in flash with boot.bin as pre-loader and then u-boot as bootloader : DOES NOT BOOT - stored in flash as unique bootloader : OK BUT FAILS KERNEL UNCOMPRESSION P.S. Looking into boot.bin sources seems that it required for Master clock, PLL frequency and SDRAM very low level settings. Hoping this could be useful :-) Marco Cavallini ===================================================== Koan s.a.s. - Software Engineering Linux and WinCE solutions for Embedded and Real-Time Software Klinux : the embedded distribution for industrial applications - Atmel AT91 ARM Third Party Consultant - Intel PCA Developer Network Member - Microsoft Windows Embedded Partner Via Pascoli, 3 - 24121 Bergamo - ITALIA Tel. (++39) 035-255.235 - Fax (++39) 178-223.9748 http://www.koansoftware.com - http://www.klinux.org =====================================================

2 1

[U-Boot-Users] broken rsync to U-Boot git archive
by Bryan O'Donoghue 03 Oct '05

03 Oct '05

git clone rsync://source.denx.net/git/u-boot.git somedir appears to be broken, at least when I tried it just now, I got errors ! I had an archive locally which dereferenced the above rsync path. I did a cg-update inside of that directory tree and got a similar error. I rm rf'd the archive assuming I'd made some noobish git/cogito error and tried the git clone command, as with the cg-update command which wanted to talk to the rsync above, I got errors like the below. timeout in data send/receive connection unexpectedly closed etc. rsync --version == 2.6.5 git core == 0.99.4 cogito == 0.13 OS == Ubuntu Breezy Badger Preview Release http cloning and presumably updating, appears to be working. Either rsync is broken or I've made an error in synchronising to it. Possibly I've hosed rsync somehow, as I've compiled git from source using an earlier version of Ubuntu "Hoary Hedgehog" and have not as yet, recompiled against my current OS libraries. Possibly that _is_ in fact the case, but, it would probably be worth the while of others to confirm/deny this. Best, Bryan -- "Beware of bugs in the above code; I have only proved it correct, not tried it." -- Donald Knuth

1 0

[U-Boot-Users] lastest 1.1.3 CONFIG_SKIP problems with arm920t on rm9200.
by Mathieu Deschamps 03 Oct '05

03 Oct '05

Hello, I have upgraded U-Boot 1.1.2 to lastest 1.1.3. I still uses the boot.bin program to set up the flash and the dram and such while having defined SKIP_RELOCATE_UBOOT and SKIP_LOWLEVEL_INIT. Indeed kept undefined I have seen that it breaks everything reaching SoC specific lowlevel_init.S in cpu/.../start.S. Imagine reinitializing flash while reading init values from it, or reinit the memory controller while using it ! It seems that these two were compulsory in my case. But even defined, my cpu goes in ABORT. Any ideas ? Regards, Mathieu Deschamps

3 4

[U-Boot-Users] [PATCH] ARM supplied & supported development boards. Errata & rationalization.
by Peter Pearse 03 Oct '05

03 Oct '05

Attached (diff -purN) patch against the GIT head code corrects some errors in the existing code and adds a new file, include/armcoremodule.h which contains the common Core Module data used by both Integrator/AP & Integrator/CP boards. This patch should be applied after my previously submitted patches. For future reference my patches are now numbered, numbers for the previously submitted patches assigned below. CHANGELOG * Patch 004 by Peter Pearse <peter.pearse(a)arm.com> Correct addessing errors in platform files. Split off common core module data from Integrator header files to include/armcoremodule.h. Previous patches have now been assigned numbers as follows 000 Patch submitted 30th June 2005 Import cc-option shell function from kernel Use it to get the correct ARM gcc options for individual cpus 001 Patch submitted 26th Sept 2005 **INCORRECT** withdrawn Ensure only Integrator boards call platformsetup 002 Patch submitted 29th Sept 2005 Ensure Integrator boards call platformsetup() rather than lowlevel_init() 003 Patch submitted 29th Sept 2005 Provide Makefile targets for all ARM supported development boards Regards Peter Pearse

1 0

Re: [U-Boot-Users] Replacing AT91 u-boot
by kentropy 03 Oct '05

03 Oct '05

> AFAIK loader.bin is used to download boot.bin to RAM location. Correct > boot.bin itself is an u-boot binary image. > It is straight executed after > downloading. Now it's possible to install a new u-boot version. Definitely not. BTW binary sizes are too different to say that boot.bin is 10KB loader.bin is 7KB u-boot is 92KB Referring to Atmel manuals boot.bin is a pre-loader ususlly stored at the beginning of flash (0x10000000) which calls u-boot (usually stored at 0x10010000). You can found sources for loader.bin and boot.bin on Atmel CDROM and until last saturday on this website. http://www.at91.com/Pages/products/EvaluationBoard/AT91RM3400DK/at91rm3400d… Today these sources have been removed (I don't know why ?)

2 1

Re: [U-Boot-Users] Replacing AT91 u-boot
by kentropy 03 Oct '05

03 Oct '05

> > May be into boot.bin there were some setting necessary for the system ? > > Nargh. Please forget boot.bin. You will not need it any more. > > > AFAIK nobody (either Atmel) uses u-boot stored at the beginning of the flash > > (as many others ARM board producers do), but AT91 uses a pre-bootloader. > > I don't know where you got this "knowledge" from, but it is plain wrong. Confusing news from AT91 website about boot.bin / loader.bin [ You need to download a "boot.bin" into the first sector. The boot.bin may need to know about which flash you are using. loader.bin has the same problem. .snip. Ulf Samuelsson ]

2 1

Re: [U-Boot-Users] Replacing AT91 u-boot
by kentropy 03 Oct '05

03 Oct '05

>You should > attach a debugger and actually try to *devbug* this > insetad of guessing (and blaming U-Boot). Ok, I won't guess anymore ;-) But I don't know how to debug it, I have no debuggers. > One of the things that did change is the mach-types.h file; > if your > kernel uses some invalid ID this could explain such a hang. > But this > is wild guessing - please debug the problem. I verified that entries MACH_TYPE_AT91RM9200 and MACH_TYPE_AT91RM9200DK are the same you found in kernel 2.6.13 and tried replacing MACH_TYPE_AT91RM9200DK MACHINE_START(MACH_TYPE_AT91RM9200DK with MACHINE_START(MACH_TYPE_AT91RM9200 in board-dk.c without success.

2 1

Re: [U-Boot-Users] Replacing AT91 u-boot
by kentropy 03 Oct '05

03 Oct '05

Thank you again for your patience answering. > The messages you showed make it clear that U-Boot *is* running fine > on your board. The thing I can't understand due to my inexperience is why using u-boot-0.3.2 with my kernel 2.6.13.2 everything worked and simply changing u-boot-1.1.3 not. So I suppose that the kernel is not the problem, but only the changed things: loader and u-boot. Trying to guess: can the problem be caused by a different kind of SDRAM or Flash between my DK and your compatible one ? TIA

3 2

[U-Boot-Users] why I don't see my msgs?
by kentropy 02 Oct '05

02 Oct '05

Hi, I wonder why I can't get back my messages from Mailing List since last days of Sept. Is it a server problem ? Cheers :-)

2 1

Re: [U-Boot-Users] Replacing AT91 u-boot
by kentropy 02 Oct '05

02 Oct '05

> Sorry, I missed this. > Remove the initrd= and mem= part. U-Boot passes correct ATAGS > to the kernel. Thank you again. I followed your suggestions: U-Boot> printenv bootdelay=3 baudrate=115200 ethaddr=00:02:a5:6e:3f:fd filesize=3638c0 fileaddr=21140000 netmask=255.255.255.0 ipaddr=192.168.0.184 serverip=192.168.0.11 bootargs=root=/dev/ram rw ramdisk_size=15360 console=ttyS0,115200 stdin=serial stdout=serial stderr=serial U-Boot> tftp 21100000 ramdisk TFTP from server 192.168.0.11; our IP address is 192.168.0.184 Filename 'ramdisk'. Load address: 0x21100000 Loading: ### .snip. ######## done Bytes transferred = 3553472 (3638c0 hex) U-Boot> tftp 21000000 uImage TFTP from server 192.168.0.11; our IP address is 192.168.0.184 Filename 'uImage'. Load address: 0x21000000 Loading: ############################################## ####################################### done Bytes transferred = 646841 (9deb9 hex) U-Boot> bootm ## Booting image at 21000000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 646777 Bytes = 631.6 kB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK Uncompressing Kernel Image ... [here is still freezed] Every test I do I'm more confused. Please apologize my question, but did you ever used an AT91RM9200DK board with u-boot (reading help and your site seems that you are a PPC expert but there is no examples using AT91) ? Why Atmel give out and say to use boot.bin as pre-bootloader and you say not ? Why the u-boot-1.1.3 default configuration for this board don't work ? Maybe there is something missing or wrong ? TIA

2 1

[U-Boot-Users] Testing rewrite of NAND code?
by Wolfgang Denk 02 Oct '05

02 Oct '05

Maybe this slipped through unnoticed, so here again: A rewrite of the NAND flash code by Ladislav Michl is available in the " "testing-NAND" branch of our git repository; you can download it using git or cogito like this: git clone rsync://source.denx.net/git/u-boot.git\#testing-NAND u-boot-testing-NAND resp. cg-clone rsync://source.denx.net/git/u-boot.git\#testing-NAND u-boot-testing-NAND Please help testing this code as thoroughly as possible. I would like to merge this into the main branch ASAP. Please send your Comments, complaints, bug reports etc. to this mailing list + Ladislav Michl + me. Thanks. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Hello! I'm from outer space, and I've made myself look like a signa- ture. While you are reading this, I'm having sex with your eyes. I know it feels good to you, because you're smiling. I'm very horny, so send me to someone else when you've had enough. Thanks! Sincerely, A Stranger in a Strange Land

4 6