October 2005 - U-Boot

[U-Boot-Users] [PATCH] change-mtdparts-definition-on-trab-board-to-match-current-flash-map
by Martin Krause 19 Jun '06

19 Jun '06

Change mtdparts definition on trab board to match current flash map Patch by Martin Krause, 27 Oct 2005 Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Change mtdparts definition on trab board to match current flash map Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [Patch] MCF5282 without preloader
by Jens Scharsig 12 Jun '06

12 Jun '06

This patch adds the MCF5282 support and includes the Zachary P. Landau fec and immap fixes as patch. CHANGELOG: * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash THX to Zachary P. Landau and Wolfgang Denk for help and inspirations. Best regards Jens Scharsig * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash

3 2

[U-Boot-Users] [Patch] New Board (EB+MCF-EV123 based on Frescale MCF5282)
by Jens Scharsig 12 Jun '06

12 Jun '06

This patch adds the BuS EB+MCF-EV123 Board. Board characteristics: CPU: Frescale MCF5282 RAM: 16MB SDRAM (16 Bit) FLASH: 2MB 16bit external PHY: Inter LXF972 These board is a reference design for future BuS Elektronik consumer boards. I think this patch is helpful for all other MCF528x users. CHANGELOG: * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add EB+MCF-EV123 board support. includes "[Patch] MCF5282 without preloader" Add m68k Boards to MAKEALL THX to Zachary P. Landau and Wolfgang Denk for help. Best regards, Jens Scharsig * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add EB+MCF-EV123 board support. includes [Patch] MCF5282 without preloader Add m68k Boards to MAKEALL

2 1

[U-Boot-Users] patch: Nios-II boards EP1C20, EP1S10 and EP1S40 part 2
by Scott McNutt 10 Jun '06

10 Jun '06

Part 2: Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 Regards, --Scott diff -Naurb u-boot-current/board/altera/ep1s40/Makefile u-boot-new/board/altera/ep1s40/Makefile --- u-boot-current/board/altera/ep1s40/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1s40/config.mk u-boot-new/board/altera/ep1s40/config.mk --- u-boot-current/board/altera/ep1s40/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1s40/ep1s40.c u-boot-new/board/altera/ep1s40/ep1s40.c --- u-boot-current/board/altera/ep1s40/ep1s40.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/ep1s40.c 2005-08-11 13:16:53.000000000 -0400 @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1S40\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1s40/u-boot.lds u-boot-new/board/altera/ep1s40/u-boot.lds --- u-boot-current/board/altera/ep1s40/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-current/include/configs/EP1C20.h u-boot-new/include/configs/EP1C20.h --- u-boot-current/include/configs/EP1C20.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1C20.h 2005-08-11 12:18:18.000000000 -0400 @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1C20 1 /* EP1C20 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for + * epcs device access is enabled. The base address is the epcs + * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. + * The register base is currently at offset 0x600 from the memory base. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- leds are, after all, + * board-specific, no? + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff -Naurb u-boot-current/include/configs/EP1S10.h u-boot-new/include/configs/EP1S10.h --- u-boot-current/include/configs/EP1S10.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1S10.h 2005-08-11 13:36:23.000000000 -0400 @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S10 1 /* EP1S10 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff -Naurb u-boot-current/include/configs/EP1S40.h u-boot-new/include/configs/EP1S40.h --- u-boot-current/include/configs/EP1S40.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1S40.h 2005-08-11 13:28:35.000000000 -0400 @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S40 1 /* EP1S40 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */

2 1

[U-Boot-Users] patch: Nios-II boards EP1C20, EP1S10 and EP1S40 part 1
by Scott McNutt 10 Jun '06

10 Jun '06

Part 1: Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-11 10:49:01.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 12:16:00.000000000 -0400 @@ -26,6 +26,9 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 + Patch by Scott McNutt + * Add EPCS Controller bootrom work-around for Nios-II Patch by Scott McNutt -When booting from an epcs controller, the epcs bootrom may leave the diff -Naurb u-boot-current/MAINTAINERS u-boot-new/MAINTAINERS --- u-boot-current/MAINTAINERS 2005-08-05 19:46:25.000000000 -0400 +++ u-boot-new/MAINTAINERS 2005-08-11 12:30:16.000000000 -0400 @@ -484,6 +484,9 @@ PCI5441 Nios-II PK1C20 Nios-II + EP1C20 Nios-II + EP1S10 Nios-II + EP1S40 Nios-II ######################################################################### # MicroBlaze Systems: # diff -Naurb u-boot-current/MAKEALL u-boot-new/MAKEALL --- u-boot-current/MAKEALL 2005-08-05 19:46:26.000000000 -0400 +++ u-boot-new/MAKEALL 2005-08-11 12:30:52.000000000 -0400 @@ -230,7 +230,7 @@ ## Nios-II Systems ######################################################################### -LIST_nios2="PCI5441 PK1C20" +LIST_nios2="PCI5441 PK1C20 EP1C20 EP1S10 EP1S40" ######################################################################### ## MicroBlaze Systems diff -Naurb u-boot-current/Makefile u-boot-new/Makefile --- u-boot-current/Makefile 2005-08-09 13:22:31.000000000 -0400 +++ u-boot-new/Makefile 2005-08-11 12:29:52.000000000 -0400 @@ -1693,6 +1693,15 @@ ## Nios-II ######################################################################### +EP1C20_config : unconfig + @./mkconfig EP1C20 nios2 nios2 ep1c20 altera + +EP1S10_config : unconfig + @./mkconfig EP1S10 nios2 nios2 ep1s10 altera + +EP1S40_config : unconfig + @./mkconfig EP1S40 nios2 nios2 ep1s40 altera + PK1C20_config : unconfig @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent diff -Naurb u-boot-current/README u-boot-new/README --- u-boot-current/README 2005-08-05 14:10:04.000000000 -0400 +++ u-boot-new/README 2005-08-11 12:31:48.000000000 -0400 @@ -319,6 +319,7 @@ ------------------------ CONFIG_PCI5441 CONFIG_PK1C20 + CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40 - CPU Module Type: (if CONFIG_COGENT is defined) diff -Naurb u-boot-current/board/altera/common/AMDLV065D.c u-boot-new/board/altera/common/AMDLV065D.c --- u-boot-current/board/altera/common/AMDLV065D.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/common/AMDLV065D.c 2005-08-10 14:01:24.000000000 -0400 @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#if defined(CONFIG_NIOS) +#include <nios.h> +#else +#include <asm/io.h> +#endif + +#define SECTSZ (64 * 1024) +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/*----------------------------------------------------------------------*/ +unsigned long flash_init (void) +{ + int i; + unsigned long addr; + flash_info_t *fli = &flash_info[0]; + + fli->size = CFG_FLASH_SIZE; + fli->sector_count = CFG_MAX_FLASH_SECT; + fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D; + + addr = CFG_FLASH_BASE; + for (i = 0; i < fli->sector_count; ++i) { + fli->start[i] = addr; + addr += SECTSZ; + fli->protect[i] = 1; + } + + return (CFG_FLASH_SIZE); +} +/*--------------------------------------------------------------------*/ +void flash_print_info (flash_info_t * info) +{ + int i, k; + int erased; + unsigned long *addr; + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + + /* Check if whole sector is erased */ + erased = 1; + addr = (unsigned long *) info->start[i]; + for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) { + if ( readl(addr++) != (unsigned long)-1) { + erased = 0; + break; + } + } + + /* Print the info */ + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); + } + printf ("\n"); +} + +/*-------------------------------------------------------------------*/ + + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + unsigned char *addr = (unsigned char *) info->start[0]; + unsigned char *addr2; + int prot, sect; + ulong start; + + /* Some sanity checking */ + if ((s_first < 0) || (s_first > s_last)) { + printf ("- no sectors to erase\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* It's ok to erase multiple sectors provided we don't delay more + * than 50 usec between cmds ... at which point the erase time-out + * occurs. So don't go and put printf() calls in the loop ... it + * won't be very helpful ;-) + */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (unsigned char *) info->start[sect]; + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr, 0x80); + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr2, 0x30); + /* Now just wait for 0xff & provide some user + * feedback while we wait. + */ + start = get_timer (0); + while ( readb (addr2) != 0xff) { + udelay (1000 * 1000); + putc ('.'); + if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { + printf ("timeout\n"); + return 1; + } + } + } + } + printf ("\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + + vu_char *cmd = (vu_char *) info->start[0]; + vu_char *dst = (vu_char *) addr; + unsigned char b; + ulong start; + + while (cnt) { + /* Check for sufficient erase */ + b = *src; + if ((readb (dst) & b) != b) { + printf ("%02x : %02x\n", readb (dst), b); + return (2); + } + + writeb (cmd, 0xaa); + writeb (cmd, 0x55); + writeb (cmd, 0xa0); + writeb (dst, b); + + /* Verify write */ + start = get_timer (0); + while (readb (dst) != b) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + dst++; + src++; + cnt--; + } + + return (0); +} diff -Naurb u-boot-current/board/altera/common/epled.c u-boot-new/board/altera/common/epled.c --- u-boot-current/board/altera/common/epled.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/common/epled.c 2005-08-09 11:33:38.000000000 -0400 @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <nios2-io.h> +#include <status_led.h> + +/* The LED port is configured as output only, so we + * must track the state manually. + */ +static led_id_t val = 0; + +void __led_init (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + writel (&pio->data, val); +} + +void __led_set (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + writel (&pio->data, val); +} + +void __led_toggle (led_id_t mask) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + val ^= mask; + writel (&pio->data, val); +} diff -Naurb u-boot-current/board/altera/ep1c20/Makefile u-boot-new/board/altera/ep1c20/Makefile --- u-boot-current/board/altera/ep1c20/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1c20/config.mk u-boot-new/board/altera/ep1c20/config.mk --- u-boot-current/board/altera/ep1c20/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1c20/ep1c20.c u-boot-new/board/altera/ep1c20/ep1c20.c --- u-boot-current/board/altera/ep1c20/ep1c20.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/ep1c20.c 2005-08-11 12:11:38.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1C20\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1c20/u-boot.lds u-boot-new/board/altera/ep1c20/u-boot.lds --- u-boot-current/board/altera/ep1c20/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-current/board/altera/ep1s10/Makefile u-boot-new/board/altera/ep1s10/Makefile --- u-boot-current/board/altera/ep1s10/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1s10/config.mk u-boot-new/board/altera/ep1s10/config.mk --- u-boot-current/board/altera/ep1s10/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1s10/ep1s10.c u-boot-new/board/altera/ep1s10/ep1s10.c --- u-boot-current/board/altera/ep1s10/ep1s10.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/ep1s10.c 2005-08-11 12:28:03.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1S10\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1s10/u-boot.lds u-boot-new/board/altera/ep1s10/u-boot.lds --- u-boot-current/board/altera/ep1s10/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +}

2 1

[U-Boot-Users] patch:
by Scott McNutt 10 Jun '06

10 Jun '06

Add EPCS Controller bootrom work-around for Nios-II -When booting from an epcs controller, the epcs bootrom may leave the slave select in an asserted state causing soft reset hang. This patch ensures slave select is negated at reset. Regards, --Scott --- u-boot-current/CHANGELOG 2005-08-11 10:41:00.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:45:49.000000000 -0400 @@ -26,6 +26,12 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Add EPCS Controller bootrom work-around for Nios-II + Patch by Scott McNutt + -When booting from an epcs controller, the epcs bootrom may leave the + slave select in an asserted state causing soft reset hang. This + patch ensures slave select is negated at reset. + * Update PK1C20 board for Nios-II 5.0 Patch by Scott McNutt -Update base addresses for standard configuration diff -Naurb u-boot-current/cpu/nios2/epcs.c u-boot-new/cpu/nios2/epcs.c --- u-boot-current/cpu/nios2/epcs.c 2005-08-09 13:24:21.000000000 -0400 +++ u-boot-new/cpu/nios2/epcs.c 2005-08-10 10:18:31.000000000 -0400 @@ -210,6 +210,21 @@ { 0, 0, 0, 0, 0, 0 } }; +int epcs_reset (void) +{ + /* When booting from an epcs controller, the epcs bootrom + * code may leave the slave select in an asserted state. + * This causes two problems: (1) The initial epcs access + * will fail -- not a big deal, and (2) a software reset + * will cause the bootrom code to hang since it does not + * ensure the select is negated prior to first access -- a + * big deal. Here we just negate chip select and everything + * gets better :-) + */ + epcs_cs (0); /* Negate chip select */ + return (0); +} + epcs_devinfo_t *epcs_dev_find (void) { unsigned char buf[4]; diff -Naurb u-boot-current/include/nios2-epcs.h u-boot-new/include/nios2-epcs.h --- u-boot-current/include/nios2-epcs.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/nios2-epcs.h 2005-08-10 10:15:40.000000000 -0400 @@ -38,6 +38,11 @@ unsigned char prot_mask; /* Protection mask */ }epcs_devinfo_t; +/* Resets the epcs controller -- to prevent (potential) soft-reset + * problems when booting from the epcs controller + */ +extern int epcs_reset (void); + /* Returns the devinfo struct if EPCS device is found; * NULL otherwise. */ diff -Naurb u-boot-current/lib_nios2/board.c u-boot-new/lib_nios2/board.c --- u-boot-current/lib_nios2/board.c 2004-10-10 17:27:35.000000000 -0400 +++ u-boot-new/lib_nios2/board.c 2005-08-10 10:15:55.000000000 -0400 @@ -31,6 +31,9 @@ #ifdef CONFIG_STATUS_LED #include <status_led.h> #endif +#if defined(CFG_NIOS_EPCSBASE) +#include <nios2-epcs.h> +#endif /* @@ -92,6 +95,9 @@ #if defined(CONFIG_BOARD_EARLY_INIT_F) board_early_init_f, /* Call board-specific init code early.*/ #endif +#if defined(CFG_NIOS_EPCSBASE) + epcs_reset, +#endif env_init, serial_init, @@ -166,6 +172,10 @@ WATCHDOG_RESET (); interrupt_init (); +#if defined(CONFIG_BOARD_LATE_INIT) + board_late_init (); +#endif + /* main_loop */ for (;;) { WATCHDOG_RESET ();

2 1

[U-Boot-Users] patch: PK1C20 for Nios-II 5.0
by Scott McNutt 10 Jun '06

10 Jun '06

Update PK1C20 board for Nios-II 5.0 -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-11 10:31:52.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:38:07.000000000 -0400 @@ -26,6 +26,11 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Update PK1C20 board for Nios-II 5.0 + Patch by Scott McNutt + -Update base addresses for standard configuration + -Eliminate use of CACHE_BYPASS in board code + * Fix I/O Macros and mini-app stubs for Nios-II Patch by Scott McNutt -Fix asm/io.h macros diff -Naurb u-boot-current/board/psyent/pk1c20/config.mk u-boot-new/board/psyent/pk1c20/config.mk --- u-boot-current/board/psyent/pk1c20/config.mk 2004-10-10 17:27:32.000000000 -0400 +++ u-boot-new/board/psyent/pk1c20/config.mk 2005-08-09 17:34:46.000000000 -0400 @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -TEXT_BASE = 0x018e0000 +TEXT_BASE = 0x01fc0000 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include diff -Naurb u-boot-current/board/psyent/pk1c20/led.c u-boot-new/board/psyent/pk1c20/led.c --- u-boot-current/board/psyent/pk1c20/led.c 2004-10-10 17:27:32.000000000 -0400 +++ u-boot-new/board/psyent/pk1c20/led.c 2005-08-09 11:33:38.000000000 -0400 @@ -22,7 +22,7 @@ */ #include <common.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <status_led.h> @@ -33,30 +33,30 @@ void __led_init (led_id_t mask, int state) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; if (state == STATUS_LED_ON) val &= ~mask; else val |= mask; - pio->data = val; + writel (&pio->data, val); } void __led_set (led_id_t mask, int state) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; if (state == STATUS_LED_ON) val &= ~mask; else val |= mask; - pio->data = val; + writel (&pio->data, val); } void __led_toggle (led_id_t mask) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; val ^= mask; - pio->data = val; + writel (&pio->data, val); } diff -Naurb u-boot-current/include/configs/PK1C20.h u-boot-new/include/configs/PK1C20.h --- u-boot-current/include/configs/PK1C20.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/configs/PK1C20.h 2005-08-09 18:04:01.000000000 -0400 @@ -32,7 +32,7 @@ #define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ #define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ @@ -51,7 +51,7 @@ #define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ #define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ #define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ #define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ /*------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ #define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) @@ -95,9 +95,9 @@ * CONSOLE *----------------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else -#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ #endif #define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ @@ -110,9 +110,9 @@ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for * epcs device access is enabled. The base address is the epcs * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. - * The register base is currently at offset 0x400 from the memory base. + * The register base is currently at offset 0x600 from the memory base. *----------------------------------------------------------------------*/ -#define CFG_NIOS_EPCSBASE 0x00900400 /* EPCS register base */ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ /*------------------------------------------------------------------------ * DEBUG @@ -126,7 +126,7 @@ * registers, we can slow it down to 10 msec using TMRCNT. If the default * period is acceptable, TMRCNT can be left undefined. *----------------------------------------------------------------------*/ -#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ #define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) @@ -137,7 +137,7 @@ * must implement its own led routines -- leds are, after all, * board-specific, no? *----------------------------------------------------------------------*/ -#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ #define CONFIG_STATUS_LED /* Enable status driver */ #define STATUS_LED_BIT 1 /* Bit-0 on PIO */ @@ -150,7 +150,7 @@ * way out to avoid changes there -- define the base address to ensure * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ diff -Naurb u-boot-current/board/psyent/common/AMDLV065D.c u-boot-new/board/psyent/common/AMDLV065D.c --- u-boot-current/board/psyent/common/AMDLV065D.c 2004-10-10 17:27:31.000000000 -0400 +++ u-boot-new/board/psyent/common/AMDLV065D.c 2005-08-10 14:01:24.000000000 -0400 @@ -26,7 +26,7 @@ #if defined(CONFIG_NIOS) #include <nios.h> #else -#include <nios2.h> +#include <asm/io.h> #endif #define SECTSZ (64 * 1024) @@ -56,9 +56,8 @@ void flash_print_info (flash_info_t * info) { int i, k; - unsigned long size; int erased; - volatile unsigned char *flash; + unsigned long *addr; printf (" Size: %ld KB in %d Sectors\n", info->size >> 10, info->sector_count); @@ -66,14 +65,10 @@ for (i = 0; i < info->sector_count; ++i) { /* Check if whole sector is erased */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; erased = 1; - flash = (volatile unsigned char *) CACHE_BYPASS(info->start[i]); - for (k = 0; k < size; k++) { - if (*flash++ != 0xff) { + addr = (unsigned long *) info->start[i]; + for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) { + if ( readl(addr++) != (unsigned long)-1) { erased = 0; break; } @@ -83,7 +78,7 @@ if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s%s", - CACHE_NO_BYPASS(info->start[i]), + info->start[i], erased ? " E" : " ", info->protect[i] ? "RO " : " "); } @@ -95,9 +90,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { - volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) - CACHE_BYPASS(info->start[0]); - volatile CFG_FLASH_WORD_SIZE *addr2; + unsigned char *addr = (unsigned char *) info->start[0]; + unsigned char *addr2; int prot, sect; ulong start; @@ -127,19 +121,18 @@ */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CFG_FLASH_WORD_SIZE *) - CACHE_BYPASS((info->start[sect])); - *addr = 0xaa; - *addr = 0x55; - *addr = 0x80; - *addr = 0xaa; - *addr = 0x55; - *addr2 = 0x30; + addr2 = (unsigned char *) info->start[sect]; + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr, 0x80); + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr2, 0x30); /* Now just wait for 0xff & provide some user * feedback while we wait. */ start = get_timer (0); - while (*addr2 != 0xff) { + while ( readb (addr2) != 0xff) { udelay (1000 * 1000); putc ('.'); if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { @@ -163,27 +156,27 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - vu_char *cmd = (vu_char *) CACHE_BYPASS(info->start[0]); - vu_char *dst = (vu_char *) CACHE_BYPASS(addr); + vu_char *cmd = (vu_char *) info->start[0]; + vu_char *dst = (vu_char *) addr; unsigned char b; ulong start; while (cnt) { /* Check for sufficient erase */ b = *src; - if ((*dst & b) != b) { - printf ("%02x : %02x\n", *dst, b); + if ((readb (dst) & b) != b) { + printf ("%02x : %02x\n", readb (dst), b); return (2); } - *cmd = 0xaa; - *cmd = 0x55; - *cmd = 0xa0; - *dst = b; + writeb (cmd, 0xaa); + writeb (cmd, 0x55); + writeb (cmd, 0xa0); + writeb (dst, b); /* Verify write */ start = get_timer (0); - while (*dst != b) { + while (readb (dst) != b) { if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { return 1; }

2 1

[U-Boot-Users] patch: Nios-II mini-app and I/O macros
by Scott McNutt 10 Jun '06

10 Jun '06

Fix I/O Macros and mini-app stubs for Nios-II -Fix asm/io.h macros -Eliminate use of CACHE_BYPASS in cpu code -Eliminate assembler warnings -Fix mini-app stubs and force no small data Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-07 19:06:32.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:30:51.000000000 -0400 @@ -26,6 +26,13 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Fix I/O Macros and mini-app stubs for Nios-II + Patch by Scott McNutt + -Fix asm/io.h macros + -Eliminate use of CACHE_BYPASS in cpu code + -Eliminate assembler warnings + -Fix mini-app stubs and force no small data + * Fix build problems for PM856 Board * Fix sign extension bug in 'fpga loadb' command; diff -Naurb u-boot-20050809/cpu/nios2/epcs.c u-boot-new/cpu/nios2/epcs.c --- u-boot-20050809/cpu/nios2/epcs.c 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/cpu/nios2/epcs.c 2005-08-09 11:05:32.781250000 -0400 @@ -25,7 +25,7 @@ #if defined(CFG_NIOS_EPCSBASE) #include <command.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <nios2-epcs.h> @@ -72,8 +72,7 @@ */ #define EPCS_TIMEOUT 100 /* 100 msec timeout */ -static nios_spi_t *epcs = - (nios_spi_t *)CACHE_BYPASS(CFG_NIOS_EPCSBASE); +static nios_spi_t *epcs = (nios_spi_t *)CFG_NIOS_EPCSBASE; /*********************************************************************** * Device access @@ -81,16 +80,20 @@ static int epcs_cs (int assert) { ulong start; + unsigned tmp; + if (assert) { - epcs->control |= NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp | NIOS_SPI_SSO); } else { /* Let all bits shift out */ start = get_timer (0); - while ((epcs->status & NIOS_SPI_TMT) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TMT) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->control &= ~NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp & ~NIOS_SPI_SSO); } return (0); } @@ -100,10 +103,10 @@ ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_TRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->txdata = c; + writel (&epcs->txdata, c); return (0); } @@ -112,10 +115,10 @@ ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_RRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_RRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - return (epcs->rxdata); + return (readl (&epcs->rxdata)); } static unsigned char bitrev[] = { diff -Naurb u-boot-20050809/cpu/nios2/interrupts.c u-boot-new/cpu/nios2/interrupts.c --- u-boot-20050809/cpu/nios2/interrupts.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/interrupts.c 2005-08-09 11:27:39.515625000 -0400 @@ -27,6 +27,7 @@ #include <nios2.h> #include <nios2-io.h> +#include <asm/io.h> #include <asm/ptrace.h> #include <common.h> #include <command.h> @@ -79,7 +80,7 @@ /* Interrupt is cleared by writing anything to the * status register. */ - tmr->status = 0; + writel (&tmr->status, 0); timestamp += CFG_NIOS_TMRMS; #ifdef CONFIG_STATUS_LED status_led_tick(timestamp); @@ -88,16 +89,17 @@ static void tmr_init (void) { - nios_timer_t *tmr =(nios_timer_t *)CACHE_BYPASS(CFG_NIOS_TMRBASE); + nios_timer_t *tmr =(nios_timer_t *)CFG_NIOS_TMRBASE; + + writel (&tmr->status, 0); + writel (&tmr->control, 0); + writel (&tmr->control, NIOS_TIMER_STOP); - tmr->control &= ~(NIOS_TIMER_START | NIOS_TIMER_ITO); - tmr->control |= NIOS_TIMER_STOP; #if defined(CFG_NIOS_TMRCNT) - tmr->periodl = CFG_NIOS_TMRCNT & 0xffff; - tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff; + writel (&tmr->periodl, CFG_NIOS_TMRCNT & 0xffff); + writel (&tmr->periodh, (CFG_NIOS_TMRCNT >> 16) & 0xffff); #endif - tmr->control |= ( NIOS_TIMER_ITO | - NIOS_TIMER_CONT | + writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT | NIOS_TIMER_START ); irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr); } diff -Naurb u-boot-20050809/cpu/nios2/serial.c u-boot-new/cpu/nios2/serial.c --- u-boot-20050809/cpu/nios2/serial.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/serial.c 2005-08-09 10:49:40.203125000 -0400 @@ -24,7 +24,7 @@ #include <common.h> #include <watchdog.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> /*------------------------------------------------------------------ @@ -32,8 +32,7 @@ *-----------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -static nios_jtag_t *jtag = - (nios_jtag_t *)CACHE_BYPASS(CFG_NIOS_CONSOLE); +static nios_jtag_t *jtag = (nios_jtag_t *)CFG_NIOS_CONSOLE; void serial_setbrg( void ){ return; } int serial_init( void ) { return(0);} @@ -42,9 +41,9 @@ { unsigned val; - while (NIOS_JTAG_WSPACE (jtag->control) == 0) + while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0) WATCHDOG_RESET (); - jtag->data = (unsigned char)c; + writel (&jtag->data, (unsigned char)c); } void serial_puts (const char *s) @@ -55,7 +54,7 @@ int serial_tstc (void) { - return (jtag->control & NIOS_JTAG_RRDY); + return ( readl (&jtag->control) & NIOS_JTAG_RRDY); } int serial_getc (void) @@ -65,7 +64,7 @@ while (1) { WATCHDOG_RESET (); - val = jtag->data; + val = readl (&jtag->data); if (val & NIOS_JTAG_RVALID) break; } @@ -78,8 +77,7 @@ *-----------------------------------------------------------------*/ #else -static nios_uart_t *uart = (nios_uart_t *) - CACHE_BYPASS(CFG_NIOS_CONSOLE); +static nios_uart_t *uart = (nios_uart_t *) CFG_NIOS_CONSOLE; #if defined(CFG_NIOS_FIXEDBAUD) @@ -97,7 +95,7 @@ unsigned div; div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1; - uart->divisor = div; + writel (&uart->divisor,div); return; } @@ -117,9 +115,9 @@ { if (c == '\n') serial_putc ('\r'); - while ((uart->status & NIOS_UART_TRDY) == 0) + while ((readl (&uart->status) & NIOS_UART_TRDY) == 0) WATCHDOG_RESET (); - uart->txdata = (unsigned char)c; + writel (&uart->txdata,(unsigned char)c); } void serial_puts (const char *s) @@ -131,14 +129,14 @@ int serial_tstc (void) { - return (uart->status & NIOS_UART_RRDY); + return (readl (&uart->status) & NIOS_UART_RRDY); } int serial_getc (void) { while (serial_tstc () == 0) WATCHDOG_RESET (); - return( uart->rxdata & 0x00ff ); + return (readl (&uart->rxdata) & 0x00ff ); } #endif /* CONFIG_JTAG_CONSOLE */ diff -Naurb u-boot-20050809/cpu/nios2/sysid.c u-boot-new/cpu/nios2/sysid.c --- u-boot-20050809/cpu/nios2/sysid.c 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/cpu/nios2/sysid.c 2005-08-09 10:55:19.234375000 -0400 @@ -26,20 +26,21 @@ #if defined (CFG_NIOS_SYSID_BASE) #include <command.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <linux/time.h> void display_sysid (void) { - struct nios_sysid_t *sysid = - (struct nios_sysid_t *)CACHE_BYPASS(CFG_NIOS_SYSID_BASE); + struct nios_sysid_t *sysid = (struct nios_sysid_t *)CFG_NIOS_SYSID_BASE; struct tm t; char asc[32]; + time_t stamp; - localtime_r ((time_t *)&sysid->timestamp, &t); + stamp = readl (&sysid->timestamp); + localtime_r (&stamp, &t); asctime_r (&t, asc); - printf ("SYSID : %08x, %s", sysid->id, asc); + printf ("SYSID : %08x, %s", readl (&sysid->id), asc); } diff -Naurb u-boot-20050809/include/asm-nios2/io.h u-boot-new/include/asm-nios2/io.h --- u-boot-20050809/include/asm-nios2/io.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/asm-nios2/io.h 2005-05-26 14:50:50.421875000 -0400 @@ -39,12 +39,13 @@ #define readl(addr)\ ({unsigned long val;\ asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;}) + #define writeb(addr,val)\ - asm volatile ("stbio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writew(addr,val)\ - asm volatile ("sthio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writel(addr,val)\ - asm volatile ("stwio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val)) #define inb(addr) readb(addr) #define inw(addr) readw(addr) diff -Naurb u-boot-current/cpu/nios2/exceptions.S u-boot-new/cpu/nios2/exceptions.S --- u-boot-current/cpu/nios2/exceptions.S 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/exceptions.S 2005-08-09 14:04:34.000000000 -0400 @@ -30,6 +30,9 @@ .global _exception + .set noat + .set nobreak + _exception: /* SAVE ALL REGS -- this allows trap and unimplemented * instruction handlers to be coded conveniently in C diff -Naurb u-boot-current/examples/Makefile u-boot-new/examples/Makefile --- u-boot-current/examples/Makefile 2005-05-16 10:19:50.000000000 -0400 +++ u-boot-new/examples/Makefile 2005-08-09 17:43:17.000000000 -0400 @@ -42,7 +42,7 @@ endif ifeq ($(ARCH),nios2) -LOAD_ADDR = 0x00800000 -L $(gcclibdir) -T nios2.lds +LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds endif ifeq ($(ARCH),m68k) diff -Naurb u-boot-current/examples/stubs.c u-boot-new/examples/stubs.c --- u-boot-current/examples/stubs.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/examples/stubs.c 2005-08-09 16:59:16.000000000 -0400 @@ -92,7 +92,7 @@ #x ":\n" \ " movhi r8, %%hi(%0)\n" \ " ori r8, r0, %%lo(%0)\n" \ -" add r8, r0, r15\n" \ +" add r8, r8, r15\n" \ " ldw r8, 0(r8)\n" \ " ldw r8, %1(r8)\n" \ " jmp r8\n" \ diff -Naurb u-boot-current/nios2_config.mk u-boot-new/nios2_config.mk --- u-boot-current/nios2_config.mk 2004-10-10 17:27:30.000000000 -0400 +++ u-boot-new/nios2_config.mk 2005-08-09 16:02:12.000000000 -0400 @@ -23,4 +23,4 @@ # PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ -PLATFORM_CPPFLAGS += -ffixed-r15 +PLATFORM_CPPFLAGS += -ffixed-r15 -G0

2 1

[U-Boot-Users] Kernel XIP
by shivappa.kushtagi＠wipro.com 19 May '06

19 May '06

Hello, I configured for kernel XIP and created xipImage. When I tried to load it through u-boot, it complained about invalid magic number. Later I added a 64 byte header required for u-boot with the following mkimage command: mkimage -A arm -O linux -T kernel -C none -a 0x00080000 -e 0x00080040 -d xipImage XIPImage. Actually some of the document found at CELF wiki specifies that we need to give "-x" option to mkimage. With -x option, mkimage fails with the following error message : mkimage: Bad file: "xipImage" has invalid buffer for XIP. After looking into the mkimage source code, found that it expects 0xFF for the first 64 bytes of xipImage. Which is missing in the xipImage I have built. There must be some in-consistency between the way xipImage is built or mkimage command. Also, I didn't find any significance of the code for "-x" if we specify the "entry point" correctly (load address + 0x40). After the mkimage, I flashed the XIPImage at address 0x00080000. After resetting the board, I got the following boot messages : ## Booting image at 00080000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2009016 Bytes = 1.9 MB Load Address: 00080000 Entry Point: 00080040 Verifying Checksum ... OK XIP Kernel Image ... OK Starting kernel ... And it stops here.... Any idea what is going wrong here ? My configuration: Processor : ARM926EJ-Sid(wb) rev 3 (v5l) Kernel : 2.6.10 Regards Shivappa

3 2

[U-Boot-Users] PATCH: apply SoC concept on arm926 cpus
by Andreas Engel 03 Apr '06

03 Apr '06

CHANGELOG entry: * Patch by Andreas Engel, 20 June 2005 applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer and cpu_reset code from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories

6 8

[U-Boot-Users] [PATCH] fix building of tools/env programs
by Murray.Jensen＠csiro.au 23 Mar '06

23 Mar '06

This patch shows what I had to do to get the programs in the tools/env directory to build (i.e. fw_printenv/fw_setenv). Your mileage may vary. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 15, 2005: - fix building of programs in the tools/env directory Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 3

[U-Boot-Users] Re: compile u-boot with recent toolchain : symbols problem
by Anton Wöllert 22 Mar '06

22 Mar '06

I've got the same problem with binutils 2.16 and gcc 3.4.4. also binutils 2.16.91.0.1 doesn't work right. > > > > I used to compile U-Boot with ELDK, but I currently need to work with > > newer toolchain : > > - binutils-2.16 > > - gcc-3.4.3 > > This looks line a binutils problem, then. May I ask why you have to > use binutils-2.16 ? May I ask you why it should not be used? How to recover bugs, if people just use older software? > > And which exact board are we talking about? > > > The "__u_boot_cmd_start" symbol value, generated with this new > > toolchain, is wrong (U-Boot crashes when relocating the command > > table). > > Can you please provide exact data, like the differences between the > System.map and the u-boot.map files when using binutils-2.16 and > another, working version of binutils? [Please use the _same_ version > of GCC for this comparison.] > > > There are two new sections between "__u_boot_cmd_start" and > > ".u_boot_cmd" address : > > - .data.rel.local > > - .data.rel > > Can you please show exactly what happens? The above, i couldn't acknowledge, but u-boot definitly hangs _after_ relocating to memory. it will dump 'Now running in RAM at .....'. But then it hangs. After relocating, it tries to manually relocate the command table. But that doesn't work. Don't know why, but with the patch it works. Obviously __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; and __u_boot_cmd_start = ADDR(.u_boot_cmd); .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; should be the same. However, this should be a binutils bug or the linker script voodoo that is done with the first script above isn't really valid. Maybe .u_boot_cmd gets misalligned. Maybe i should try to DEBUG(& __u_boot_cmd_start) in both (the patched and unpatched) versions to see, where it points, or maybe objdump show more. Btw. this happens on the tqm8xx board. Thanks to Vincent for recovering that, that saved me a lot of time... kind regards Anton Wöllert

4 10

[U-Boot-Users] Bug in DTT for temperatures below zero degress !!!
by Steven Scholz 14 Mar '06

14 Mar '06

Hi there, there's a terrible bug in the current U-Boot CVS concerning DDT: For temperature below zero the function dtt_get_temp() (at least for lm75) returns wrong values! ... DTT: 1 is 235 C LCD: Hitachi TX14D11 5,7" 320x240 TFT (235°C) WDT: disabled This is because of the use of an "int" although the lm75 only returns two byte ("signed short"). This trivial fix is needed: Index: u-boot/dtt/lm75.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/dtt/lm75.c,v retrieving revision 1.2 diff -u -r1.2 lm75.c --- u-boot/dtt/lm75.c 27 Jun 2003 21:32:38 -0000 1.2 +++ u-boot/dtt/lm75.c 15 Jun 2005 08:44:21 -0000 @@ -174,7 +170,7 @@ int dtt_get_temp(int sensor) { - return (dtt_read(sensor, DTT_READ_TEMP) / 256); + return ( ((signed short) dtt_read(sensor, DTT_READ_TEMP)) / 256); } /* dtt_get_temp() */ #endif /* CONFIG_DTT_LM75 */ Then the output is correct: ... DTT: 1 is -28 C LCD: Hitachi TX14D11 5,7" 320x240 TFT (-28°C) CCFL: disabled (too cold!) WDT: disabled I am afraid this is an issues on all DTT in U-Boot. Some even only use "uchar". Comments? -- Steven

2 2

[U-Boot-Users] gunzip question about large uImages
by Robin Getz 13 Mar '06

13 Mar '06

Quick Question: It looks to me that the max uncompressed image size is hard coded to 4Meg (0x400000 bytes). Any thoughts why? Long question: We were having some problems booting large uImages (reported here ~ month ago). It seemed as if the were not being decompressed properly. When we had someone (Aubrey Li) dig into it he found/pointed out that in the latest cvs, u-boot/common/cmd_bootm.c the function do_bootm defines what looks to be a uncompressed max length as: uint unc_len = 0x400000; This is passed to gunzip if the image needs to be uncompressed. --snip-- case IH_COMP_GZIP: printf (" Uncompressing %s ... ", name); if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, (uchar *)data, &len) != 0) { puts ("GUNZIP ERROR - must RESET board to recover\n"); SHOW_BOOT_PROGRESS (-6); do_reset (cmdtp, flag, argc, argv); } break; --snip-- gunzip takes this as the second parameter and sets it to dstlen. int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp) This is passed to the inflation routine as s.avail_out = dstlen; where inflate from u-boot/lib_generic/zlib.c uses this to halt decompression if the image size can not fit. -- snip -- from int inflate(z, f) -- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) r = inflate_packet_flush(z->state->blocks); --snip -- from local int inflate_flush(s, z, r)-- /* compute number of bytes to copy as far as end of window */ n = (uInt)((q <= s->write ? s->write : s->end) - q); if (n > z->avail_out) n = z->avail_out; if (n && r == Z_BUF_ERROR) r = Z_OK; /* update counters */ z->avail_out -= n; z->total_out += n; -- When unc_len is increased - our problem goes away... So: two questions: - what is the best way to manage the size of unc_len? in include/configs/platform.h? Or just make it really_really big? - do you want a patch in u-boot/common/cmd_bootm.c/gunzip to check to see if the image was completely decompressed? OR - do you want a patch in u-boot/lib_generic/zlib.c to return an error if it runs out of room? Thanks -Robin

2 1

[U-Boot-Users] Why exceptions are enabled before exception vector code is copied
by Cedric VINCENT 13 Mar '06

13 Mar '06

Dear Wolfgang. Can I ask you why exceptions are enabled before exception vector code is copied to the low RAM pages ? (I am talking about U-Boot/PPC) On my board, U-Boot crashes before relocation (when debugging) since Xilinx Microprocessor Debugger (XMD) makes a spurious "Machine Check Exception". For other reasons, such an exception could arrived before u-boot starts. Finally, it is a bug or a very strange coding behaviour... Cedric VINCENT.

2 6

[U-Boot-Users] [PATCH] I2C2 support for MPC8548CDS
by Zajac Adam-AAZ004 13 Mar '06

13 Mar '06

The attached patch adds I2C2 support for the MPC8548CDS board. I've performed a limited testing on our MPC8548CDS board and everything seems to be working fine. Since this processor is brand new, I may need to revise the changes when we build our real system based on '8548. Thanks, Adam Zajac <<mpc8548cds_i2c2.patch.gz>>

2 1

[U-Boot-Users] malloc with no return check?
by Andrew Dyer 13 Mar '06

13 Mar '06

I noticed the au1xxx ethernet driver has a malloc where the return value isn't checked. I did some more looking while waiting for a slow flash programmer and at least these files seem to do the same thing: ./drivers/ns8382x.c ./drivers/bcm570x.c ./drivers/rtl8139.c ./drivers/eepro100.c ./drivers/dc2114x.c ./drivers/e1000.c ./drivers/sk98lin/skge.c ./drivers/cfb_console.c ./drivers/natsemi.c ./drivers/inca-ip_sw.c ./drivers/rtl8169.c ./drivers/pcnet.c ./cpu/mips/au1x00_eth.c ./cpu/ppc4xx/serial.c ./cpu/ppc4xx/405gp_enet.c ./cpu/ppc4xx/440gx_enet.c ./cpu/i386/serial.c ./cpu/mpc8xx/scc.c ./common/hush.c ./cpu/mpc8xx/spi.c ?maybe ./cpu/mpc8260/spi.c ?maybe ./cpu/mpc85xx/ether_fcc.c ./cpu/mpc8260/ether_fcc.c ./cpu/mpc5xxx/fec.c ./cpu/mpc8220/fec.c ./tools/easylogo/easylogo.c I didn't look under the board directory or check all varieties of alloc :-) I will submit patches for the mips stuff hopefully next week. -- Hardware, n.: The parts of a computer system that can be kicked.

3 4

[U-Boot-Users] [PATCH] in tftp client, recover from lost ACKs
by Brenda J. Butler 13 Mar '06

13 Mar '06

CHANGELOG entry: * Patch by John McCarthy and Brenda J. Butler, 8 July 2005 When the tftp client sends an ack but it gets lost, the server will resend the block. The client was now expecting the next block and ignored this block, the server never got an ack, and they got stuck. Now the tftp client will ack the block the second (and subsequent) time(s) allowing the tftp session to proceed. This little fix assumes that the server will resend exactly the same contents (same size from same offset). Here is the patch for you to look at; it is also in an attachment where the tabs and lines are preserved better. Apply to top of head checkout with patch -p0 < uboot2.patch Index: net/tftp.c =================================================================== RCS file: /u00/cvs/u-boot3/net/tftp.c,v retrieving revision 1.1 retrieving revision 1.3 diff -u -r1.1 -r1.3 --- net/tftp.c 15 Mar 2005 17:53:28 -0000 1.1 +++ net/tftp.c 5 Jul 2005 19:48:46 -0000 1.3 @@ -246,17 +246,17 @@ } } - if (TftpBlock == TftpLastBlock) { - /* - * Same block again; ignore it. - */ - break; - } - TftpLastBlock = TftpBlock; NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); - store_block (TftpBlock - 1, pkt + 2, len); + if (TftpBlock != TftpLastBlock) { + /* + * Same block again; do everything again + * except store it. Hope the server sent + * exactly the same length/contents. + */ + store_block (TftpBlock - 1, pkt + 2, len); + } /* * Acknoledge the block just received, which will prompt

2 1

[U-Boot-Users] [PATCH] fix [id]cache_status for MPC85xx processors
by Murray.Jensen＠csiro.au 13 Mar '06

13 Mar '06

The existing code for the [id]cache_status commands on MPC85xx processors looks at the wrong bit to determine if the L1 cache is enabled. It looks at the most significant bit when it should look at the least significant bit. This patch corrects this bug. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 19, 2005: - fix bug in [id]cache_status commands for MPC85xx processors; should look at LSB of L1CSRn registers to determine if L1 cache is enabled, not the MSB. Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] fix fw_setenv with uninitialised environment
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

In tools/env/fw_env.c when the environment is uninitialised, and the default_environment[] array is used instead, if a setenv is done there is a good chance that the array bounds will be exceeded. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 15, 2005: - fix array overflow with fw_setenv on uninitialised environment Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] PATCH: Add support for EmbeddedPlanet EP88x boards
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch adds support for EmbeddedPlanet EP88x boards. It was tested on EP88xC board with MPC885 processor, 64MB RAM, and 16MB flash. CHANGELOG Add support for EmbeddedPlanet EP88x boards -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

3 5

[U-Boot-Users] extra headers in xilinx ml300 board
by Michael Libeskind 12 Mar '06

12 Mar '06

/board/xilinx/xilinx_enet/emac_adapter.c and /board/xilinx/xilinx_iic/iic_adapter.c both have a #include <configs/ml300.h> which I believe prevents users from making other board configs under the /board/xilinx directory based on the ML300 that use the xilinx_enet and xilinx_iic adapaters. Can this be removed?

2 3

[U-Boot-Users] [PATCH] board support for the mpc8540eval board
by Ron Alder 12 Mar '06

12 Mar '06

The attached patch adds support for the MPC8540 EVAL board. The patch is based on the top of the cvs tree as of 11 July 2005. CHANGELOG entry: * Patch by Ron Alder, 11 July 2005 Add Xianghua Xiao and Lunsheng Wang's support for the GDA MPC8540 EVAL board.

2 1

[U-Boot-Users] [PATCH] add support for Nat Semi DP83865 PHY to MPC85xx TSEC driver
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds support for the National Semiconductor DP83865 gigabit ethernet PHY to the MPC85xx TSEC ethernet driver. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add Nat Semi DP83865 PHY support to MPC85xx TSEC driver Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] add (some) definitions for MPC85xx local bus controller
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds (some) definitions for the MPC85xx local bus controller register bits, in a similar vein to the MPC8260 memory controller, which is almost identical. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add (some) definitions for the MPC85xx local bus controller Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1