October 2005 - U-Boot

[U-Boot-Users] U boot modification...
by Kiran Jammula 23 May '12

23 May '12

Hi, I am using U boot for my project. I need to configure the console while booting by prompting the user from target board LCD and Keypad. So please let me know which file of the U-boot I have to modify to achieve this. Kiran _________________________________________________________________ Special offer for NRIs! http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm Get a zero balance account for next 20 years. From Citibank

4 5

[U-Boot-Users] Ethernet loopback command
by Thomas Schäfer 17 Apr '12

17 Apr '12

Hi, The patch attached provides a command called 'ethloop' which allows to perform loopback testing on the current eth device. To achieve this, a new ethernet packet type (PROT_TEST, 0x0808, AFAIK this is not used otherwise) is introduced in net/net.c. The patch is against SF CVS from 20050307. The functions EthLoopStart, EthLoopSend and EthLoopHandler generate a simple ethernet frame with NetOurEther as destination address and packet type PROT_TEST. The looped back package is compared with the original one and a message is displayed. It is necessary to set the ethernet line into loopback mode either by programming the PHY or using a loopback plug. I've tested this on our PPC405 custom board, but it should also work on all other systems because packet generation is independent of the underlying ethernet hardware. Example usage: => mii w 0 0 7100 <-- sets PHY into loopback mode => ethloop Using ppc_405x_eth0 device Got ethernet loopback frame, len=64 loopback test successfully completed => mii w 0 0 8000 <-- PHY reset after test is completed Maybe this is also useful for others.. Best regards, Thomas Schäfer ____________________________________ Kontron Modular Computers GmbH Konrad-Zuse-Str. 9 66115 Saarbrücken Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: thomas.schaefer(a)kontron.com

5 5

[U-Boot-Users] how to support usbtty
by zhuzhenhua 31 Aug '08

31 Aug '08

becides set CONFIG_USB_TTY, what other modification need to do for the usbtty support? thanks for any hints

5 10

[U-Boot-Users] u-boot for MPC8548
by Rupesh S 07 Jun '07

07 Jun '07

Hi Does u-boot support any evaluation boards based on the MPC8548 processor ? Thanks in advance -- Rupesh S

2 1

[U-Boot-Users] mtdparts
by Ladislav Michl 29 Oct '06

29 Oct '06

Hi there. I'm just trying to sync with U-Boot development and found a little regresion in new mtdparts code. Previously I was using custom partition function, which let me do precisely what I wanted. mtd0 - U-Boot mtd1 - env mtd2 - r_env mtd3 - rootfs0 mtd4 - rootfs1 ... etc In above scheme my custom part function allowed only chpart [34], so it was not even possible to change partition to evn sector for example. Moreover it was pretty easy to construct kernel command line this way: setenv bootargs '$bootargs root=/dev/mtdblock$partition ro rootfstype=jffs2' And everything worked nicely. That is no longer case and it's real pain with both NOR and NAND devices used in system. Prefered solution for me is to fix kernel to be able to mount root filesystem from MTD device given by name (root=mtd:rootfs0) unless someone has better idea :-). Something which would work also with 2.4 kernels would be appreciated. ladis

6 14

[U-Boot-Users] New NAND code
by Stefan Roese 10 Aug '06

10 Aug '06

Hi! I was just wondering about state of the NAND code. When I remember correctly a pretty big rewrite was done but not commited yet. Is the last patch sent to this list from Pantelis Antoniou on 5th May still the latest version? Best regards, Stefan

6 8

[U-Boot-Users] [PATCH] HEAD cmd_falsh.c for m68k tool chain
by Jens Scharsig 31 Jul '06

31 Jul '06

CHANGELOG entry: * Patch by Jens Scharsig, 28 July 2005 - fix some compiler/parser error, if using m68k tool chain - optical fix for protect on/off all messages, if using more then one bank Best regards, Jens Scharsig Index: common/cmd_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/cmd_flash.c,v retrieving revision 1.13 diff -p -u -r1.13 cmd_flash.c --- common/cmd_flash.c 15 Jul 2005 22:47:24 -0000 1.13 +++ common/cmd_flash.c 28 Jul 2005 12:32:00 -0000 @@ -117,11 +117,15 @@ static int addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) { char *ep; + char len_used; /* indicates if the "start +length" form used */ + char found; + ulong bank; + *addr_first = simple_strtoul(arg1, &ep, 16); if (ep == arg1 || *ep != '\0') - return -1; - - char len_used = 0; /* indicates if the "start +length" form used */ + return -1; + + len_used = 0; /* indicates if the "start +length" form used */ if (arg2 && *arg2 == '+'){ len_used = 1; ++arg2; @@ -146,8 +150,7 @@ addr_spec(char *arg1, char *arg2, ulong */ /* find the end addr of the sector where the *addr_last is */ - char found = 0; - ulong bank; + found = 0; for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){ int i; flash_info_t *info = &flash_info[bank]; @@ -453,12 +456,10 @@ int do_protect (cmd_tbl_t *cmdtp, int fl info->protect[i] = p; #endif /* CFG_FLASH_PROTECTION */ } - } - #if defined(CFG_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); + if (!rcode) puts (" done\n"); #endif /* CFG_FLASH_PROTECTION */ - + } return rcode; }

2 2

[U-Boot-Users] MIPS: AMD Alchemy au1x00 ethernet problems
by geoff cleary 23 Jul '06

23 Jul '06

Hi I am seeing a problem with network support on the AMD dbau1550 eval board (and our own board based on Au1550). It seems that after one network command, no further packets can be sent. The minimal case that shows the problem is to include the ping command. The first ping will succeed; any other network commands time out. I have successfully loaded large files using tftpboot command and confirmed the image loaded correctly. Trying the command again fails with TX timeout. Has anyone seen this problem or have any suggestions as to what is going on? We are building little endian. I have tried Joseph Chiu's buffer 0 patch. Thanks Geoff __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

4 3

[U-Boot-Users] PATCH for cmd_mem.c:do_mem_mtest()
by Andrew Dyer 22 Jul '06

22 Jul '06

Sorry the patch below isn't from git - I hope it's still acceptable. I've put a copy in the body and attached it incase gmail decides to line wrap the text. ChangeLog: * Patch by Andrew Dyer, 13 September 2005: if CFG_ALT_MEMTEST is defined without CFG_MEMTEST_SCRATCH, cmd_mem.c code will dereference a null pointer. Change the code to use the last word of the memory test area as the scratch location in this case. Print the scratch memory location used. Signed-off-by: Andrew Dyer <amdyer(a)gmail.com> Index: common/cmd_mem.c =================================================================== RCS file: /home/cvsroot/Projects/u-boot/common/cmd_mem.c,v retrieving revision 1.1.1.1 diff -p -u -r1.1.1.1 cmd_mem.c --- common/cmd_mem.c 28 Jun 2005 17:32:26 -0000 1.1.1.1 +++ common/cmd_mem.c 13 Sep 2005 10:40:26 -0000 @@ -707,7 +707,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int #if defined(CFG_MEMTEST_SCRATCH) vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH; #else - vu_long *dummy = NULL; + vu_long *dummy; #endif int j; int iterations = 1; @@ -747,7 +747,17 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int } #if defined(CFG_ALT_MEMTEST) + +#if !defined(CFG_MEMTEST_SCRATCH) + /* if no fixed scratch area is defined use + * the last location of the test area + */ + end--; + dummy = end; +#endif + printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end); + printf ("using address %08x as scratch\n",dummy); PRINTF("%s:%d: start 0x%p end 0x%p\n", __FUNCTION__, __LINE__, start, end); -- Hardware, n.: The parts of a computer system that can be kicked.

6 16

[U-Boot-Users] My 3 patches
by luo.jinhua 22 Jul '06

22 Jul '06

Hi. Here is my 3 patches. sbc2410x.patch is for the new board -- SBC-2410X. I write this new hardware-specific configurations refer to smdk2410 configurations in U-Boot. File list: MAKEALL Makefile board/sbc2410x/Makefile board/sbc2410x/config.mk board/sbc2410x/flash.c board/sbc2410x/lowlevel_init.S board/sbc2410x/sbc2410x.c board/sbc2410x/u-boot.lds cpu/arm920t/s3c24x0/interrupts.c include/configs/sbc2410x.h This patch adds a new configuration option -- CONFIG_SBC2410X. cmdline_editing.patch implements cmdline-editing extension of readline. I pick codes heavily borrowed from vivi bootloader and integrate them into U-Boot. File list: common/main.c This patch adds a new configuration option -- CONFIG_CMDLINE_EDITING. nand_for_sbc2410x.patch adds nand support for SBC-2410X board. It do that by taking nand controller specific codes (from VCMA9 board) in place. File list: common/cmd_nand.c include/linux/mtd/nand.h include/linux/mtd/nand_ids.h more detail please review: http://sourceforge.net/mailarchive/forum.php?thread_id=8089177&forum_id=128… CHANGELOG item: * Add support for friendly-arm SBC-2410X board Patch by JinHua Luo, 1 Sep 2005 * Add to readline cmdline-editing extension Patch by JinHua Luo, 1 Sep 2005 * Add nand support for SBC-2410X Patch by JinHua Luo, 1 Sep 2005 CREDIT item (if proper): N: JinHua Luo E: luo.jinhua(a)gd-linux.com home_king(a)163.com D: Support for friendly-arm SBC-2410X board D: Add to readline cmdline-editing extension D: Add nand support for SBC-2410X W: www.gd-linux.com Best regards, luo.jinhua -- JinHua Luo, GuangDong Linux Center, <luo.jinhua(a)gd-linux.com>

3 3

[U-Boot-Users] i386 multi_image.
by David Updegraff 22 Jul '06

22 Jul '06

Hi. I think this is needed to correctly boot multi-part images if you are unfortuanate enough to be working on an i386 platform. -dbu. diff --git a/lib_i386/i386_linux.c b/lib_i386/i386_linux.c --- a/lib_i386/i386_linux.c +++ b/lib_i386/i386_linux.c @@ -150,6 +150,11 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, in initrd_start = 0; initrd_end = 0; } + /* <dave(a)cray.com> : if multi-part img. need to advance base ptr */ + if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) { + int i; + for (i=0, addr+=sizeof(int); len_ptr[i++]; addr+=sizeof(int)); + } base_ptr = load_zimage((void*)addr + sizeof(image_header_t), ntohl(hdr->ih_size), initrd_start, initrd_end-initrd_start, 0);

2 1

[U-Boot-Users] [Patch] KVME080 Support
by Sangmoon Kim 22 Jul '06

22 Jul '06

Hi, This patch adds support for KVME080 board. KVME080 is a VME board with MPC8245 CPU. It also patches drivers/cfi_flash.c. First, it adds CFG_FLASH_PROTECT_CLEAR because for some flash memories(such as 28F320C3) all banks are protected after reset. Second, it makes write_buff not to call flash_write_cfibuffer if buffer_size is1. Because for flash memories with buffer_size 1, buffer write is not supported. Third, it makes 64 bit writes to use FLASH_WRITE64 if FLASH_WRITE64 is defined. Because KVME080 needs it. Fourth, it makes flash_detect_cfi call FLASH_PORTWIDTH when changing portwidth if FLASH_PORTWIDTH is defined. Because on some CPUs (such as MPC8245), port width should be changed. Regards, Sangmoon Kim

2 3

[U-Boot-Users] MIPS LE build problems
by Wolfgang Denk 22 Jul '06

22 Jul '06

Dear Thomas, I always wondered what exactly was the reason why I was not able to build the dbau1x00 targets (especially the little endian dbau1550_el target using the ELDK toolchain). Also, I always wondered about the reference to a non-exitent cpu/mips/little/liblittle.a library. Is ther ea special reason for the current settings of build options for the dbau1x00 targets? Attached below is a patch which makes all dbau1x00 targets build fine with the current ELDK, and I believe these settings are more correct than the previous ones. If you don't protest I would like to merge this patch into the public source tree? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Remember, there's a big difference between kneeling down and bending over. - Frank Zappa

6 31

[U-Boot-Users] parse bug in cmd_mii.c
by Andrew Dyer 22 Jul '06

22 Jul '06

I noticed that in do_mii() the code is dereferencing argv[1] without checking what value argc has. This leads to an exception if a command line like 'mii ' is given where argv[1] is NULL. I have a patch, but my cmd_mii.c is carrying around some other patches (some submitted to the list, some local). Is there a good way to separate out the patches I want to submit by themselves? -- Hardware, n.: The parts of a computer system that can be kicked.

2 4

[U-Boot-Users] PATCH: Add PLEB 2 to top-level makefile
by David Snowdon 20 Jun '06

20 Jun '06

Please find attached a patch to the top level Makefile and associated documentation to add support for the PLEB 2 board (which somehow got left out of the last patch). Modifies: Makefile README MAKEALL Regards, Dave.

2 1

[U-Boot-Users] NOTE: New MTD flash partitioning methods
by Wolfgang Denk 20 Jun '06

20 Jun '06

Hello everybody, especially board maintainers! I just comitted a bigger patch that implements a new "mtdparts" command and a common partition scheme that allows U-Boot and Linux to share the same idea about flash partitioning.. Old, obsolete and duplicated code was cleaned up and replaced by the new partitioning method. There are two possible approaches now: The first one is to define a single, static partition: #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */ #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */ #define CONFIG_JFFS2_PART_OFFSET 0x00000000 The second method is to use the "mtdparts" command line and dynamic partitioning: /* mtdparts command line support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. The code was tested on the following targets: Alaska8220, CPCI4052, NC650, PPChamelion, incaip. Besides the above targets, there were several other targets affected, where necessary changes were made. However, no testing was done for those targets, only compilation was verified (for PPC, MIPS and ARM targets). Due to the lack of tool chain for NICOS and i386 I was not able to compile the following targets: ADNPESC1, DK1C20, DK1S10, sc520_cdp, sc520_spunk. Among the modified and not tested targets there is a group of targets which were implementing their custom multi-partition scheme. This was mostly duplicating jffs2_part_info() routine code. Introducing the new common scheme required removing this duplicated code, so those targets should be especially carefully tested by the board main- tainers. Target list that require special attention: xsengine, voiceblue, mx1fs2, MPC8260ADS, innokom and VoVPN-GW (JFFS2 is by default not compiled in) and especially SXNI855T where the jffs2_part_info() routine was doing some custom NAND read caching. Thanks. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de If there was anything that depressed him more than his own cynicism, it was that quite often it still wasn't as cynical as real life. - Terry Pratchett, _Guards! Guards!_

2 2

[U-Boot-Users] PATCH - Add support for wrPPMC7xx/74xx boards
by Richard Danter 20 Jun '06

20 Jun '06

Please find attached my patch for the Wind River PPMC 7xx/74xx boards. It has been tested with an MPC750 (66MHz bus) and MPC7400 (100MHz bus). It adds ppmc7xx to the board directory. The following common files have been modified: cpu/74xx_7xx/cpu.c cpu/74xx_7xx/start.S CREDITS drivers/pci.c include/ns16550.h MAKEALL Makefile This is my first patch so please let me know if I have missed anything. Thanks Rich

2 1

[U-Boot-Users] [PATCH] Support for new board, gth2
by Thomas Lange 19 Jun '06

19 Jun '06

* Patch by Thomas Lange Aug 11 2005 - Add support for gth2 board Changes to common files: * common/cmd_ide.c Swap input data if GTH2 and Big endian * cpu/mips/au1x00_serial.c Call GTH2 log functions. Make sure watchdog is kicked * cpu/mips/cpu.c If gth2, hang during reset until hardware watchdog kicks in * include/asm-mips/au1x00.h Add GPIO definitions /Thomas

2 1

[U-Boot-Users] [PATCH] dbau1x00 corrections
by Thomas Lange 19 Jun '06

19 Jun '06

* Patch by Thomas Lange Aug 10 2005 - Fix dbau1x00 boards broken by dbau1550 patch PLL:s were not set for boards other than 1550. Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. Default boot is now bootp for cards other than 1550. /Thomas Index: board/dbau1x00/lowlevel_init.S =================================================================== RCS file: /cvsroot/u-boot/u-boot/board/dbau1x00/lowlevel_init.S,v retrieving revision 1.1 diff -p -u -r1.1 lowlevel_init.S --- board/dbau1x00/lowlevel_init.S 2 Apr 2005 23:52:28 -0000 1.1 +++ board/dbau1x00/lowlevel_init.S 10 Aug 2005 13:07:23 -0000 @@ -185,6 +185,8 @@ tlbloop: bne t0, t2, tlbloop nop +#endif /* CONFIG_DBAU1550 */ + /* First setup pll:s to make serial work ok */ /* We have a 12 MHz crystal */ li t0, SYS_CPUPLL @@ -205,6 +207,7 @@ tlbloop: sw t1, 0(t0) /* aux pll */ sync +#ifdef CONFIG_DBAU1550 /* Static memory controller */ /* RCE0 - can not change while fetching, do so from icache */ move t2, ra /* Store return address */ @@ -237,7 +240,7 @@ noCacheJump: sw t1, 0(t0) #else /* CONFIG_DBAU1550 */ li t0, MEM_STTIME0 - li t1, 0x00014C0F + li t1, 0x040181D7 sw t1, 0(t0) /* RCE0 AMD 29LV640M MirrorBit Flash */ Index: include/configs/dbau1x00.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/dbau1x00.h,v retrieving revision 1.4 diff -p -u -r1.4 dbau1x00.h --- include/configs/dbau1x00.h 9 Jan 2005 22:29:00 -0000 1.4 +++ include/configs/dbau1x00.h 10 Aug 2005 13:07:24 -0000 @@ -81,8 +81,7 @@ CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" +#define CONFIG_BOOTCOMMAND "bootp;bootm" #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ @@ -133,8 +132,6 @@ #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ -#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - #else /* CONFIG_DBAU1550 */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ @@ -145,6 +142,8 @@ #endif /* CONFIG_DBAU1550 */ +#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} + #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1

2 1

[U-Boot-Users] [PATCH] 08-change-boot-delay-message-on-trab-board.patch
by Martin Krause 19 Jun '06

19 Jun '06

Change boot delay message on trab board Patch by Martin Krause, 27 Oct 2005 In series production versions of trab u-boot, this patch allways was applied - but had been forgotten to push it up into denx U-Boot tree, since now. Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Change boot delay message on trab board Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [PATCH] 07-fix-setting-of-environment-variable-ver-on-trab-board.patch
by Martin Krause 19 Jun '06

19 Jun '06

Fix setting of environment variable "ver" on trab board Patch by Martin Krause, 27 Oct 2005 The environment variable "ver" is now set before do_auto_update() is called, so that "ver" could be used in USB update scripts. Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Fix setting of environment variable "ver" on trab board Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [PATCH] 06-fix-wrong-usage-of-udelay-in-led-blink-on-trab-board.patch
by Martin Krause 19 Jun '06

19 Jun '06

Fix wrong usage of udelay() in led_blink() on trab board Patch by Martin Krause, 27 Oct 2005 Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Fix wrong usage of udelay() in led_blink() on trab board Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [PATCH] 05-fix-conflicting-types-flash-write-in-trab-auto-update-c.patch
by Martin Krause 19 Jun '06

19 Jun '06

Fix conflicting types (flash_write()) in trab auto_update.c Patch by Martin Krause, 25 Oct 2005 Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Fix conflicting types (flash_write()) in trab auto_update.c Patch by Martin Krause, 25 Oct 2005

2 1

[U-Boot-Users] [PATCH] 04-fix-udelay-bug-in-vfd-c-for-trab-board.patch
by Martin Krause 19 Jun '06

19 Jun '06

Fix udelay bug in vfd.c for trab board Patch by Martin Krause, 27 Oct 2005 Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Fix udelay bug in vfd.c for trab board Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [PATCH] 03-disable-jffs2-support-for-trab-board.patch
by Martin Krause 19 Jun '06

19 Jun '06

Disable JFFS2 support for trab board Patch by Martin Krause, 27 Oct 2005 This feature isn't used yet in the trab series U-Boot version. Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Disable JFFS2 support for trab board Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [PATCH] change-mtdparts-definition-on-trab-board-to-match-current-flash-map
by Martin Krause 19 Jun '06

19 Jun '06

Change mtdparts definition on trab board to match current flash map Patch by Martin Krause, 27 Oct 2005 Regards, Martin Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Change mtdparts definition on trab board to match current flash map Patch by Martin Krause, 27 Oct 2005

2 1

[U-Boot-Users] [Patch] MCF5282 without preloader
by Jens Scharsig 12 Jun '06

12 Jun '06

This patch adds the MCF5282 support and includes the Zachary P. Landau fec and immap fixes as patch. CHANGELOG: * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash THX to Zachary P. Landau and Wolfgang Denk for help and inspirations. Best regards Jens Scharsig * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add MCF5282 support (without preloader) relocate ichache_State to ram u-boot can run from internal flash

3 2

[U-Boot-Users] [Patch] New Board (EB+MCF-EV123 based on Frescale MCF5282)
by Jens Scharsig 12 Jun '06

12 Jun '06

This patch adds the BuS EB+MCF-EV123 Board. Board characteristics: CPU: Frescale MCF5282 RAM: 16MB SDRAM (16 Bit) FLASH: 2MB 16bit external PHY: Inter LXF972 These board is a reference design for future BuS Elektronik consumer boards. I think this patch is helpful for all other MCF528x users. CHANGELOG: * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add EB+MCF-EV123 board support. includes "[Patch] MCF5282 without preloader" Add m68k Boards to MAKEALL THX to Zachary P. Landau and Wolfgang Denk for help. Best regards, Jens Scharsig * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 08 Aug. 2005: Add EB+MCF-EV123 board support. includes [Patch] MCF5282 without preloader Add m68k Boards to MAKEALL

2 1

[U-Boot-Users] patch: Nios-II boards EP1C20, EP1S10 and EP1S40 part 2
by Scott McNutt 10 Jun '06

10 Jun '06

Part 2: Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 Regards, --Scott diff -Naurb u-boot-current/board/altera/ep1s40/Makefile u-boot-new/board/altera/ep1s40/Makefile --- u-boot-current/board/altera/ep1s40/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1s40/config.mk u-boot-new/board/altera/ep1s40/config.mk --- u-boot-current/board/altera/ep1s40/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1s40/ep1s40.c u-boot-new/board/altera/ep1s40/ep1s40.c --- u-boot-current/board/altera/ep1s40/ep1s40.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/ep1s40.c 2005-08-11 13:16:53.000000000 -0400 @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1S40\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1s40/u-boot.lds u-boot-new/board/altera/ep1s40/u-boot.lds --- u-boot-current/board/altera/ep1s40/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s40/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-current/include/configs/EP1C20.h u-boot-new/include/configs/EP1C20.h --- u-boot-current/include/configs/EP1C20.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1C20.h 2005-08-11 12:18:18.000000000 -0400 @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1C20 1 /* EP1C20 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for + * epcs device access is enabled. The base address is the epcs + * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. + * The register base is currently at offset 0x600 from the memory base. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- leds are, after all, + * board-specific, no? + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff -Naurb u-boot-current/include/configs/EP1S10.h u-boot-new/include/configs/EP1S10.h --- u-boot-current/include/configs/EP1S10.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1S10.h 2005-08-11 13:36:23.000000000 -0400 @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S10 1 /* EP1S10 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff -Naurb u-boot-current/include/configs/EP1S40.h u-boot-new/include/configs/EP1S40.h --- u-boot-current/include/configs/EP1S40.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/include/configs/EP1S40.h 2005-08-11 13:28:35.000000000 -0400 @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S40 1 /* EP1S40 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */

2 1

[U-Boot-Users] patch: Nios-II boards EP1C20, EP1S10 and EP1S40 part 1
by Scott McNutt 10 Jun '06

10 Jun '06

Part 1: Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-11 10:49:01.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 12:16:00.000000000 -0400 @@ -26,6 +26,9 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 + Patch by Scott McNutt + * Add EPCS Controller bootrom work-around for Nios-II Patch by Scott McNutt -When booting from an epcs controller, the epcs bootrom may leave the diff -Naurb u-boot-current/MAINTAINERS u-boot-new/MAINTAINERS --- u-boot-current/MAINTAINERS 2005-08-05 19:46:25.000000000 -0400 +++ u-boot-new/MAINTAINERS 2005-08-11 12:30:16.000000000 -0400 @@ -484,6 +484,9 @@ PCI5441 Nios-II PK1C20 Nios-II + EP1C20 Nios-II + EP1S10 Nios-II + EP1S40 Nios-II ######################################################################### # MicroBlaze Systems: # diff -Naurb u-boot-current/MAKEALL u-boot-new/MAKEALL --- u-boot-current/MAKEALL 2005-08-05 19:46:26.000000000 -0400 +++ u-boot-new/MAKEALL 2005-08-11 12:30:52.000000000 -0400 @@ -230,7 +230,7 @@ ## Nios-II Systems ######################################################################### -LIST_nios2="PCI5441 PK1C20" +LIST_nios2="PCI5441 PK1C20 EP1C20 EP1S10 EP1S40" ######################################################################### ## MicroBlaze Systems diff -Naurb u-boot-current/Makefile u-boot-new/Makefile --- u-boot-current/Makefile 2005-08-09 13:22:31.000000000 -0400 +++ u-boot-new/Makefile 2005-08-11 12:29:52.000000000 -0400 @@ -1693,6 +1693,15 @@ ## Nios-II ######################################################################### +EP1C20_config : unconfig + @./mkconfig EP1C20 nios2 nios2 ep1c20 altera + +EP1S10_config : unconfig + @./mkconfig EP1S10 nios2 nios2 ep1s10 altera + +EP1S40_config : unconfig + @./mkconfig EP1S40 nios2 nios2 ep1s40 altera + PK1C20_config : unconfig @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent diff -Naurb u-boot-current/README u-boot-new/README --- u-boot-current/README 2005-08-05 14:10:04.000000000 -0400 +++ u-boot-new/README 2005-08-11 12:31:48.000000000 -0400 @@ -319,6 +319,7 @@ ------------------------ CONFIG_PCI5441 CONFIG_PK1C20 + CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40 - CPU Module Type: (if CONFIG_COGENT is defined) diff -Naurb u-boot-current/board/altera/common/AMDLV065D.c u-boot-new/board/altera/common/AMDLV065D.c --- u-boot-current/board/altera/common/AMDLV065D.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/common/AMDLV065D.c 2005-08-10 14:01:24.000000000 -0400 @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#if defined(CONFIG_NIOS) +#include <nios.h> +#else +#include <asm/io.h> +#endif + +#define SECTSZ (64 * 1024) +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/*----------------------------------------------------------------------*/ +unsigned long flash_init (void) +{ + int i; + unsigned long addr; + flash_info_t *fli = &flash_info[0]; + + fli->size = CFG_FLASH_SIZE; + fli->sector_count = CFG_MAX_FLASH_SECT; + fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D; + + addr = CFG_FLASH_BASE; + for (i = 0; i < fli->sector_count; ++i) { + fli->start[i] = addr; + addr += SECTSZ; + fli->protect[i] = 1; + } + + return (CFG_FLASH_SIZE); +} +/*--------------------------------------------------------------------*/ +void flash_print_info (flash_info_t * info) +{ + int i, k; + int erased; + unsigned long *addr; + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + + /* Check if whole sector is erased */ + erased = 1; + addr = (unsigned long *) info->start[i]; + for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) { + if ( readl(addr++) != (unsigned long)-1) { + erased = 0; + break; + } + } + + /* Print the info */ + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); + } + printf ("\n"); +} + +/*-------------------------------------------------------------------*/ + + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + unsigned char *addr = (unsigned char *) info->start[0]; + unsigned char *addr2; + int prot, sect; + ulong start; + + /* Some sanity checking */ + if ((s_first < 0) || (s_first > s_last)) { + printf ("- no sectors to erase\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* It's ok to erase multiple sectors provided we don't delay more + * than 50 usec between cmds ... at which point the erase time-out + * occurs. So don't go and put printf() calls in the loop ... it + * won't be very helpful ;-) + */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (unsigned char *) info->start[sect]; + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr, 0x80); + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr2, 0x30); + /* Now just wait for 0xff & provide some user + * feedback while we wait. + */ + start = get_timer (0); + while ( readb (addr2) != 0xff) { + udelay (1000 * 1000); + putc ('.'); + if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { + printf ("timeout\n"); + return 1; + } + } + } + } + printf ("\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + + vu_char *cmd = (vu_char *) info->start[0]; + vu_char *dst = (vu_char *) addr; + unsigned char b; + ulong start; + + while (cnt) { + /* Check for sufficient erase */ + b = *src; + if ((readb (dst) & b) != b) { + printf ("%02x : %02x\n", readb (dst), b); + return (2); + } + + writeb (cmd, 0xaa); + writeb (cmd, 0x55); + writeb (cmd, 0xa0); + writeb (dst, b); + + /* Verify write */ + start = get_timer (0); + while (readb (dst) != b) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + dst++; + src++; + cnt--; + } + + return (0); +} diff -Naurb u-boot-current/board/altera/common/epled.c u-boot-new/board/altera/common/epled.c --- u-boot-current/board/altera/common/epled.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/common/epled.c 2005-08-09 11:33:38.000000000 -0400 @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <nios2-io.h> +#include <status_led.h> + +/* The LED port is configured as output only, so we + * must track the state manually. + */ +static led_id_t val = 0; + +void __led_init (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + writel (&pio->data, val); +} + +void __led_set (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + writel (&pio->data, val); +} + +void __led_toggle (led_id_t mask) +{ + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; + + val ^= mask; + writel (&pio->data, val); +} diff -Naurb u-boot-current/board/altera/ep1c20/Makefile u-boot-new/board/altera/ep1c20/Makefile --- u-boot-current/board/altera/ep1c20/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1c20/config.mk u-boot-new/board/altera/ep1c20/config.mk --- u-boot-current/board/altera/ep1c20/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1c20/ep1c20.c u-boot-new/board/altera/ep1c20/ep1c20.c --- u-boot-current/board/altera/ep1c20/ep1c20.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/ep1c20.c 2005-08-11 12:11:38.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1C20\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1c20/u-boot.lds u-boot-new/board/altera/ep1c20/u-boot.lds --- u-boot-current/board/altera/ep1c20/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1c20/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-current/board/altera/ep1s10/Makefile u-boot-new/board/altera/ep1s10/Makefile --- u-boot-current/board/altera/ep1s10/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/Makefile 2005-08-11 12:10:57.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o ../common/epled.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-current/board/altera/ep1s10/config.mk u-boot-new/board/altera/ep1s10/config.mk --- u-boot-current/board/altera/ep1s10/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/config.mk 2005-08-11 12:09:47.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01fc0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-current/board/altera/ep1s10/ep1s10.c u-boot-new/board/altera/ep1s10/ep1s10.c --- u-boot-current/board/altera/ep1s10/ep1s10.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/ep1s10.c 2005-08-11 12:28:03.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Altera EP-1S10\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-current/board/altera/ep1s10/u-boot.lds u-boot-new/board/altera/ep1s10/u-boot.lds --- u-boot-current/board/altera/ep1s10/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-new/board/altera/ep1s10/u-boot.lds 2004-10-10 17:27:32.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +}

2 1

[U-Boot-Users] patch:
by Scott McNutt 10 Jun '06

10 Jun '06

Add EPCS Controller bootrom work-around for Nios-II -When booting from an epcs controller, the epcs bootrom may leave the slave select in an asserted state causing soft reset hang. This patch ensures slave select is negated at reset. Regards, --Scott --- u-boot-current/CHANGELOG 2005-08-11 10:41:00.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:45:49.000000000 -0400 @@ -26,6 +26,12 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Add EPCS Controller bootrom work-around for Nios-II + Patch by Scott McNutt + -When booting from an epcs controller, the epcs bootrom may leave the + slave select in an asserted state causing soft reset hang. This + patch ensures slave select is negated at reset. + * Update PK1C20 board for Nios-II 5.0 Patch by Scott McNutt -Update base addresses for standard configuration diff -Naurb u-boot-current/cpu/nios2/epcs.c u-boot-new/cpu/nios2/epcs.c --- u-boot-current/cpu/nios2/epcs.c 2005-08-09 13:24:21.000000000 -0400 +++ u-boot-new/cpu/nios2/epcs.c 2005-08-10 10:18:31.000000000 -0400 @@ -210,6 +210,21 @@ { 0, 0, 0, 0, 0, 0 } }; +int epcs_reset (void) +{ + /* When booting from an epcs controller, the epcs bootrom + * code may leave the slave select in an asserted state. + * This causes two problems: (1) The initial epcs access + * will fail -- not a big deal, and (2) a software reset + * will cause the bootrom code to hang since it does not + * ensure the select is negated prior to first access -- a + * big deal. Here we just negate chip select and everything + * gets better :-) + */ + epcs_cs (0); /* Negate chip select */ + return (0); +} + epcs_devinfo_t *epcs_dev_find (void) { unsigned char buf[4]; diff -Naurb u-boot-current/include/nios2-epcs.h u-boot-new/include/nios2-epcs.h --- u-boot-current/include/nios2-epcs.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/nios2-epcs.h 2005-08-10 10:15:40.000000000 -0400 @@ -38,6 +38,11 @@ unsigned char prot_mask; /* Protection mask */ }epcs_devinfo_t; +/* Resets the epcs controller -- to prevent (potential) soft-reset + * problems when booting from the epcs controller + */ +extern int epcs_reset (void); + /* Returns the devinfo struct if EPCS device is found; * NULL otherwise. */ diff -Naurb u-boot-current/lib_nios2/board.c u-boot-new/lib_nios2/board.c --- u-boot-current/lib_nios2/board.c 2004-10-10 17:27:35.000000000 -0400 +++ u-boot-new/lib_nios2/board.c 2005-08-10 10:15:55.000000000 -0400 @@ -31,6 +31,9 @@ #ifdef CONFIG_STATUS_LED #include <status_led.h> #endif +#if defined(CFG_NIOS_EPCSBASE) +#include <nios2-epcs.h> +#endif /* @@ -92,6 +95,9 @@ #if defined(CONFIG_BOARD_EARLY_INIT_F) board_early_init_f, /* Call board-specific init code early.*/ #endif +#if defined(CFG_NIOS_EPCSBASE) + epcs_reset, +#endif env_init, serial_init, @@ -166,6 +172,10 @@ WATCHDOG_RESET (); interrupt_init (); +#if defined(CONFIG_BOARD_LATE_INIT) + board_late_init (); +#endif + /* main_loop */ for (;;) { WATCHDOG_RESET ();

2 1

[U-Boot-Users] patch: PK1C20 for Nios-II 5.0
by Scott McNutt 10 Jun '06

10 Jun '06

Update PK1C20 board for Nios-II 5.0 -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-11 10:31:52.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:38:07.000000000 -0400 @@ -26,6 +26,11 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Update PK1C20 board for Nios-II 5.0 + Patch by Scott McNutt + -Update base addresses for standard configuration + -Eliminate use of CACHE_BYPASS in board code + * Fix I/O Macros and mini-app stubs for Nios-II Patch by Scott McNutt -Fix asm/io.h macros diff -Naurb u-boot-current/board/psyent/pk1c20/config.mk u-boot-new/board/psyent/pk1c20/config.mk --- u-boot-current/board/psyent/pk1c20/config.mk 2004-10-10 17:27:32.000000000 -0400 +++ u-boot-new/board/psyent/pk1c20/config.mk 2005-08-09 17:34:46.000000000 -0400 @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -TEXT_BASE = 0x018e0000 +TEXT_BASE = 0x01fc0000 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include diff -Naurb u-boot-current/board/psyent/pk1c20/led.c u-boot-new/board/psyent/pk1c20/led.c --- u-boot-current/board/psyent/pk1c20/led.c 2004-10-10 17:27:32.000000000 -0400 +++ u-boot-new/board/psyent/pk1c20/led.c 2005-08-09 11:33:38.000000000 -0400 @@ -22,7 +22,7 @@ */ #include <common.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <status_led.h> @@ -33,30 +33,30 @@ void __led_init (led_id_t mask, int state) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; if (state == STATUS_LED_ON) val &= ~mask; else val |= mask; - pio->data = val; + writel (&pio->data, val); } void __led_set (led_id_t mask, int state) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; if (state == STATUS_LED_ON) val &= ~mask; else val |= mask; - pio->data = val; + writel (&pio->data, val); } void __led_toggle (led_id_t mask) { - nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR; val ^= mask; - pio->data = val; + writel (&pio->data, val); } diff -Naurb u-boot-current/include/configs/PK1C20.h u-boot-new/include/configs/PK1C20.h --- u-boot-current/include/configs/PK1C20.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/configs/PK1C20.h 2005-08-09 18:04:01.000000000 -0400 @@ -32,7 +32,7 @@ #define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ #define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ @@ -51,7 +51,7 @@ #define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ #define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ #define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ #define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ /*------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ #define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) @@ -95,9 +95,9 @@ * CONSOLE *----------------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else -#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ #endif #define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ @@ -110,9 +110,9 @@ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for * epcs device access is enabled. The base address is the epcs * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. - * The register base is currently at offset 0x400 from the memory base. + * The register base is currently at offset 0x600 from the memory base. *----------------------------------------------------------------------*/ -#define CFG_NIOS_EPCSBASE 0x00900400 /* EPCS register base */ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ /*------------------------------------------------------------------------ * DEBUG @@ -126,7 +126,7 @@ * registers, we can slow it down to 10 msec using TMRCNT. If the default * period is acceptable, TMRCNT can be left undefined. *----------------------------------------------------------------------*/ -#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ #define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) @@ -137,7 +137,7 @@ * must implement its own led routines -- leds are, after all, * board-specific, no? *----------------------------------------------------------------------*/ -#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ #define CONFIG_STATUS_LED /* Enable status driver */ #define STATUS_LED_BIT 1 /* Bit-0 on PIO */ @@ -150,7 +150,7 @@ * way out to avoid changes there -- define the base address to ensure * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ diff -Naurb u-boot-current/board/psyent/common/AMDLV065D.c u-boot-new/board/psyent/common/AMDLV065D.c --- u-boot-current/board/psyent/common/AMDLV065D.c 2004-10-10 17:27:31.000000000 -0400 +++ u-boot-new/board/psyent/common/AMDLV065D.c 2005-08-10 14:01:24.000000000 -0400 @@ -26,7 +26,7 @@ #if defined(CONFIG_NIOS) #include <nios.h> #else -#include <nios2.h> +#include <asm/io.h> #endif #define SECTSZ (64 * 1024) @@ -56,9 +56,8 @@ void flash_print_info (flash_info_t * info) { int i, k; - unsigned long size; int erased; - volatile unsigned char *flash; + unsigned long *addr; printf (" Size: %ld KB in %d Sectors\n", info->size >> 10, info->sector_count); @@ -66,14 +65,10 @@ for (i = 0; i < info->sector_count; ++i) { /* Check if whole sector is erased */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; erased = 1; - flash = (volatile unsigned char *) CACHE_BYPASS(info->start[i]); - for (k = 0; k < size; k++) { - if (*flash++ != 0xff) { + addr = (unsigned long *) info->start[i]; + for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) { + if ( readl(addr++) != (unsigned long)-1) { erased = 0; break; } @@ -83,7 +78,7 @@ if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s%s", - CACHE_NO_BYPASS(info->start[i]), + info->start[i], erased ? " E" : " ", info->protect[i] ? "RO " : " "); } @@ -95,9 +90,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { - volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) - CACHE_BYPASS(info->start[0]); - volatile CFG_FLASH_WORD_SIZE *addr2; + unsigned char *addr = (unsigned char *) info->start[0]; + unsigned char *addr2; int prot, sect; ulong start; @@ -127,19 +121,18 @@ */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CFG_FLASH_WORD_SIZE *) - CACHE_BYPASS((info->start[sect])); - *addr = 0xaa; - *addr = 0x55; - *addr = 0x80; - *addr = 0xaa; - *addr = 0x55; - *addr2 = 0x30; + addr2 = (unsigned char *) info->start[sect]; + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr, 0x80); + writeb (addr, 0xaa); + writeb (addr, 0x55); + writeb (addr2, 0x30); /* Now just wait for 0xff & provide some user * feedback while we wait. */ start = get_timer (0); - while (*addr2 != 0xff) { + while ( readb (addr2) != 0xff) { udelay (1000 * 1000); putc ('.'); if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { @@ -163,27 +156,27 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - vu_char *cmd = (vu_char *) CACHE_BYPASS(info->start[0]); - vu_char *dst = (vu_char *) CACHE_BYPASS(addr); + vu_char *cmd = (vu_char *) info->start[0]; + vu_char *dst = (vu_char *) addr; unsigned char b; ulong start; while (cnt) { /* Check for sufficient erase */ b = *src; - if ((*dst & b) != b) { - printf ("%02x : %02x\n", *dst, b); + if ((readb (dst) & b) != b) { + printf ("%02x : %02x\n", readb (dst), b); return (2); } - *cmd = 0xaa; - *cmd = 0x55; - *cmd = 0xa0; - *dst = b; + writeb (cmd, 0xaa); + writeb (cmd, 0x55); + writeb (cmd, 0xa0); + writeb (dst, b); /* Verify write */ start = get_timer (0); - while (*dst != b) { + while (readb (dst) != b) { if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { return 1; }

2 1

[U-Boot-Users] patch: Nios-II mini-app and I/O macros
by Scott McNutt 10 Jun '06

10 Jun '06

Fix I/O Macros and mini-app stubs for Nios-II -Fix asm/io.h macros -Eliminate use of CACHE_BYPASS in cpu code -Eliminate assembler warnings -Fix mini-app stubs and force no small data Regards, --Scott diff -Naurb u-boot-current/CHANGELOG u-boot-new/CHANGELOG --- u-boot-current/CHANGELOG 2005-08-07 19:06:32.000000000 -0400 +++ u-boot-new/CHANGELOG 2005-08-11 10:30:51.000000000 -0400 @@ -26,6 +26,13 @@ Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. +* Fix I/O Macros and mini-app stubs for Nios-II + Patch by Scott McNutt + -Fix asm/io.h macros + -Eliminate use of CACHE_BYPASS in cpu code + -Eliminate assembler warnings + -Fix mini-app stubs and force no small data + * Fix build problems for PM856 Board * Fix sign extension bug in 'fpga loadb' command; diff -Naurb u-boot-20050809/cpu/nios2/epcs.c u-boot-new/cpu/nios2/epcs.c --- u-boot-20050809/cpu/nios2/epcs.c 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/cpu/nios2/epcs.c 2005-08-09 11:05:32.781250000 -0400 @@ -25,7 +25,7 @@ #if defined(CFG_NIOS_EPCSBASE) #include <command.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <nios2-epcs.h> @@ -72,8 +72,7 @@ */ #define EPCS_TIMEOUT 100 /* 100 msec timeout */ -static nios_spi_t *epcs = - (nios_spi_t *)CACHE_BYPASS(CFG_NIOS_EPCSBASE); +static nios_spi_t *epcs = (nios_spi_t *)CFG_NIOS_EPCSBASE; /*********************************************************************** * Device access @@ -81,16 +80,20 @@ static int epcs_cs (int assert) { ulong start; + unsigned tmp; + if (assert) { - epcs->control |= NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp | NIOS_SPI_SSO); } else { /* Let all bits shift out */ start = get_timer (0); - while ((epcs->status & NIOS_SPI_TMT) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TMT) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->control &= ~NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp & ~NIOS_SPI_SSO); } return (0); } @@ -100,10 +103,10 @@ ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_TRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->txdata = c; + writel (&epcs->txdata, c); return (0); } @@ -112,10 +115,10 @@ ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_RRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_RRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - return (epcs->rxdata); + return (readl (&epcs->rxdata)); } static unsigned char bitrev[] = { diff -Naurb u-boot-20050809/cpu/nios2/interrupts.c u-boot-new/cpu/nios2/interrupts.c --- u-boot-20050809/cpu/nios2/interrupts.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/interrupts.c 2005-08-09 11:27:39.515625000 -0400 @@ -27,6 +27,7 @@ #include <nios2.h> #include <nios2-io.h> +#include <asm/io.h> #include <asm/ptrace.h> #include <common.h> #include <command.h> @@ -79,7 +80,7 @@ /* Interrupt is cleared by writing anything to the * status register. */ - tmr->status = 0; + writel (&tmr->status, 0); timestamp += CFG_NIOS_TMRMS; #ifdef CONFIG_STATUS_LED status_led_tick(timestamp); @@ -88,16 +89,17 @@ static void tmr_init (void) { - nios_timer_t *tmr =(nios_timer_t *)CACHE_BYPASS(CFG_NIOS_TMRBASE); + nios_timer_t *tmr =(nios_timer_t *)CFG_NIOS_TMRBASE; + + writel (&tmr->status, 0); + writel (&tmr->control, 0); + writel (&tmr->control, NIOS_TIMER_STOP); - tmr->control &= ~(NIOS_TIMER_START | NIOS_TIMER_ITO); - tmr->control |= NIOS_TIMER_STOP; #if defined(CFG_NIOS_TMRCNT) - tmr->periodl = CFG_NIOS_TMRCNT & 0xffff; - tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff; + writel (&tmr->periodl, CFG_NIOS_TMRCNT & 0xffff); + writel (&tmr->periodh, (CFG_NIOS_TMRCNT >> 16) & 0xffff); #endif - tmr->control |= ( NIOS_TIMER_ITO | - NIOS_TIMER_CONT | + writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT | NIOS_TIMER_START ); irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr); } diff -Naurb u-boot-20050809/cpu/nios2/serial.c u-boot-new/cpu/nios2/serial.c --- u-boot-20050809/cpu/nios2/serial.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/serial.c 2005-08-09 10:49:40.203125000 -0400 @@ -24,7 +24,7 @@ #include <common.h> #include <watchdog.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> /*------------------------------------------------------------------ @@ -32,8 +32,7 @@ *-----------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -static nios_jtag_t *jtag = - (nios_jtag_t *)CACHE_BYPASS(CFG_NIOS_CONSOLE); +static nios_jtag_t *jtag = (nios_jtag_t *)CFG_NIOS_CONSOLE; void serial_setbrg( void ){ return; } int serial_init( void ) { return(0);} @@ -42,9 +41,9 @@ { unsigned val; - while (NIOS_JTAG_WSPACE (jtag->control) == 0) + while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0) WATCHDOG_RESET (); - jtag->data = (unsigned char)c; + writel (&jtag->data, (unsigned char)c); } void serial_puts (const char *s) @@ -55,7 +54,7 @@ int serial_tstc (void) { - return (jtag->control & NIOS_JTAG_RRDY); + return ( readl (&jtag->control) & NIOS_JTAG_RRDY); } int serial_getc (void) @@ -65,7 +64,7 @@ while (1) { WATCHDOG_RESET (); - val = jtag->data; + val = readl (&jtag->data); if (val & NIOS_JTAG_RVALID) break; } @@ -78,8 +77,7 @@ *-----------------------------------------------------------------*/ #else -static nios_uart_t *uart = (nios_uart_t *) - CACHE_BYPASS(CFG_NIOS_CONSOLE); +static nios_uart_t *uart = (nios_uart_t *) CFG_NIOS_CONSOLE; #if defined(CFG_NIOS_FIXEDBAUD) @@ -97,7 +95,7 @@ unsigned div; div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1; - uart->divisor = div; + writel (&uart->divisor,div); return; } @@ -117,9 +115,9 @@ { if (c == '\n') serial_putc ('\r'); - while ((uart->status & NIOS_UART_TRDY) == 0) + while ((readl (&uart->status) & NIOS_UART_TRDY) == 0) WATCHDOG_RESET (); - uart->txdata = (unsigned char)c; + writel (&uart->txdata,(unsigned char)c); } void serial_puts (const char *s) @@ -131,14 +129,14 @@ int serial_tstc (void) { - return (uart->status & NIOS_UART_RRDY); + return (readl (&uart->status) & NIOS_UART_RRDY); } int serial_getc (void) { while (serial_tstc () == 0) WATCHDOG_RESET (); - return( uart->rxdata & 0x00ff ); + return (readl (&uart->rxdata) & 0x00ff ); } #endif /* CONFIG_JTAG_CONSOLE */ diff -Naurb u-boot-20050809/cpu/nios2/sysid.c u-boot-new/cpu/nios2/sysid.c --- u-boot-20050809/cpu/nios2/sysid.c 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/cpu/nios2/sysid.c 2005-08-09 10:55:19.234375000 -0400 @@ -26,20 +26,21 @@ #if defined (CFG_NIOS_SYSID_BASE) #include <command.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <linux/time.h> void display_sysid (void) { - struct nios_sysid_t *sysid = - (struct nios_sysid_t *)CACHE_BYPASS(CFG_NIOS_SYSID_BASE); + struct nios_sysid_t *sysid = (struct nios_sysid_t *)CFG_NIOS_SYSID_BASE; struct tm t; char asc[32]; + time_t stamp; - localtime_r ((time_t *)&sysid->timestamp, &t); + stamp = readl (&sysid->timestamp); + localtime_r (&stamp, &t); asctime_r (&t, asc); - printf ("SYSID : %08x, %s", sysid->id, asc); + printf ("SYSID : %08x, %s", readl (&sysid->id), asc); } diff -Naurb u-boot-20050809/include/asm-nios2/io.h u-boot-new/include/asm-nios2/io.h --- u-boot-20050809/include/asm-nios2/io.h 2005-03-30 18:28:19.000000000 -0500 +++ u-boot-new/include/asm-nios2/io.h 2005-05-26 14:50:50.421875000 -0400 @@ -39,12 +39,13 @@ #define readl(addr)\ ({unsigned long val;\ asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;}) + #define writeb(addr,val)\ - asm volatile ("stbio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writew(addr,val)\ - asm volatile ("sthio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writel(addr,val)\ - asm volatile ("stwio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val)) #define inb(addr) readb(addr) #define inw(addr) readw(addr) diff -Naurb u-boot-current/cpu/nios2/exceptions.S u-boot-new/cpu/nios2/exceptions.S --- u-boot-current/cpu/nios2/exceptions.S 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/cpu/nios2/exceptions.S 2005-08-09 14:04:34.000000000 -0400 @@ -30,6 +30,9 @@ .global _exception + .set noat + .set nobreak + _exception: /* SAVE ALL REGS -- this allows trap and unimplemented * instruction handlers to be coded conveniently in C diff -Naurb u-boot-current/examples/Makefile u-boot-new/examples/Makefile --- u-boot-current/examples/Makefile 2005-05-16 10:19:50.000000000 -0400 +++ u-boot-new/examples/Makefile 2005-08-09 17:43:17.000000000 -0400 @@ -42,7 +42,7 @@ endif ifeq ($(ARCH),nios2) -LOAD_ADDR = 0x00800000 -L $(gcclibdir) -T nios2.lds +LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds endif ifeq ($(ARCH),m68k) diff -Naurb u-boot-current/examples/stubs.c u-boot-new/examples/stubs.c --- u-boot-current/examples/stubs.c 2004-10-10 17:27:33.000000000 -0400 +++ u-boot-new/examples/stubs.c 2005-08-09 16:59:16.000000000 -0400 @@ -92,7 +92,7 @@ #x ":\n" \ " movhi r8, %%hi(%0)\n" \ " ori r8, r0, %%lo(%0)\n" \ -" add r8, r0, r15\n" \ +" add r8, r8, r15\n" \ " ldw r8, 0(r8)\n" \ " ldw r8, %1(r8)\n" \ " jmp r8\n" \ diff -Naurb u-boot-current/nios2_config.mk u-boot-new/nios2_config.mk --- u-boot-current/nios2_config.mk 2004-10-10 17:27:30.000000000 -0400 +++ u-boot-new/nios2_config.mk 2005-08-09 16:02:12.000000000 -0400 @@ -23,4 +23,4 @@ # PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ -PLATFORM_CPPFLAGS += -ffixed-r15 +PLATFORM_CPPFLAGS += -ffixed-r15 -G0

2 1

[U-Boot-Users] Kernel XIP
by shivappa.kushtagi＠wipro.com 19 May '06

19 May '06

Hello, I configured for kernel XIP and created xipImage. When I tried to load it through u-boot, it complained about invalid magic number. Later I added a 64 byte header required for u-boot with the following mkimage command: mkimage -A arm -O linux -T kernel -C none -a 0x00080000 -e 0x00080040 -d xipImage XIPImage. Actually some of the document found at CELF wiki specifies that we need to give "-x" option to mkimage. With -x option, mkimage fails with the following error message : mkimage: Bad file: "xipImage" has invalid buffer for XIP. After looking into the mkimage source code, found that it expects 0xFF for the first 64 bytes of xipImage. Which is missing in the xipImage I have built. There must be some in-consistency between the way xipImage is built or mkimage command. Also, I didn't find any significance of the code for "-x" if we specify the "entry point" correctly (load address + 0x40). After the mkimage, I flashed the XIPImage at address 0x00080000. After resetting the board, I got the following boot messages : ## Booting image at 00080000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2009016 Bytes = 1.9 MB Load Address: 00080000 Entry Point: 00080040 Verifying Checksum ... OK XIP Kernel Image ... OK Starting kernel ... And it stops here.... Any idea what is going wrong here ? My configuration: Processor : ARM926EJ-Sid(wb) rev 3 (v5l) Kernel : 2.6.10 Regards Shivappa

3 2

[U-Boot-Users] PATCH: apply SoC concept on arm926 cpus
by Andreas Engel 03 Apr '06

03 Apr '06

CHANGELOG entry: * Patch by Andreas Engel, 20 June 2005 applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer and cpu_reset code from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories

6 8

[U-Boot-Users] [PATCH] fix building of tools/env programs
by Murray.Jensen＠csiro.au 23 Mar '06

23 Mar '06

This patch shows what I had to do to get the programs in the tools/env directory to build (i.e. fw_printenv/fw_setenv). Your mileage may vary. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 15, 2005: - fix building of programs in the tools/env directory Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 3

[U-Boot-Users] Re: compile u-boot with recent toolchain : symbols problem
by Anton Wöllert 22 Mar '06

22 Mar '06

I've got the same problem with binutils 2.16 and gcc 3.4.4. also binutils 2.16.91.0.1 doesn't work right. > > > > I used to compile U-Boot with ELDK, but I currently need to work with > > newer toolchain : > > - binutils-2.16 > > - gcc-3.4.3 > > This looks line a binutils problem, then. May I ask why you have to > use binutils-2.16 ? May I ask you why it should not be used? How to recover bugs, if people just use older software? > > And which exact board are we talking about? > > > The "__u_boot_cmd_start" symbol value, generated with this new > > toolchain, is wrong (U-Boot crashes when relocating the command > > table). > > Can you please provide exact data, like the differences between the > System.map and the u-boot.map files when using binutils-2.16 and > another, working version of binutils? [Please use the _same_ version > of GCC for this comparison.] > > > There are two new sections between "__u_boot_cmd_start" and > > ".u_boot_cmd" address : > > - .data.rel.local > > - .data.rel > > Can you please show exactly what happens? The above, i couldn't acknowledge, but u-boot definitly hangs _after_ relocating to memory. it will dump 'Now running in RAM at .....'. But then it hangs. After relocating, it tries to manually relocate the command table. But that doesn't work. Don't know why, but with the patch it works. Obviously __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; and __u_boot_cmd_start = ADDR(.u_boot_cmd); .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; should be the same. However, this should be a binutils bug or the linker script voodoo that is done with the first script above isn't really valid. Maybe .u_boot_cmd gets misalligned. Maybe i should try to DEBUG(& __u_boot_cmd_start) in both (the patched and unpatched) versions to see, where it points, or maybe objdump show more. Btw. this happens on the tqm8xx board. Thanks to Vincent for recovering that, that saved me a lot of time... kind regards Anton Wöllert

4 10

[U-Boot-Users] Bug in DTT for temperatures below zero degress !!!
by Steven Scholz 14 Mar '06

14 Mar '06

Hi there, there's a terrible bug in the current U-Boot CVS concerning DDT: For temperature below zero the function dtt_get_temp() (at least for lm75) returns wrong values! ... DTT: 1 is 235 C LCD: Hitachi TX14D11 5,7" 320x240 TFT (235°C) WDT: disabled This is because of the use of an "int" although the lm75 only returns two byte ("signed short"). This trivial fix is needed: Index: u-boot/dtt/lm75.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/dtt/lm75.c,v retrieving revision 1.2 diff -u -r1.2 lm75.c --- u-boot/dtt/lm75.c 27 Jun 2003 21:32:38 -0000 1.2 +++ u-boot/dtt/lm75.c 15 Jun 2005 08:44:21 -0000 @@ -174,7 +170,7 @@ int dtt_get_temp(int sensor) { - return (dtt_read(sensor, DTT_READ_TEMP) / 256); + return ( ((signed short) dtt_read(sensor, DTT_READ_TEMP)) / 256); } /* dtt_get_temp() */ #endif /* CONFIG_DTT_LM75 */ Then the output is correct: ... DTT: 1 is -28 C LCD: Hitachi TX14D11 5,7" 320x240 TFT (-28°C) CCFL: disabled (too cold!) WDT: disabled I am afraid this is an issues on all DTT in U-Boot. Some even only use "uchar". Comments? -- Steven

2 2

[U-Boot-Users] gunzip question about large uImages
by Robin Getz 13 Mar '06

13 Mar '06

Quick Question: It looks to me that the max uncompressed image size is hard coded to 4Meg (0x400000 bytes). Any thoughts why? Long question: We were having some problems booting large uImages (reported here ~ month ago). It seemed as if the were not being decompressed properly. When we had someone (Aubrey Li) dig into it he found/pointed out that in the latest cvs, u-boot/common/cmd_bootm.c the function do_bootm defines what looks to be a uncompressed max length as: uint unc_len = 0x400000; This is passed to gunzip if the image needs to be uncompressed. --snip-- case IH_COMP_GZIP: printf (" Uncompressing %s ... ", name); if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, (uchar *)data, &len) != 0) { puts ("GUNZIP ERROR - must RESET board to recover\n"); SHOW_BOOT_PROGRESS (-6); do_reset (cmdtp, flag, argc, argv); } break; --snip-- gunzip takes this as the second parameter and sets it to dstlen. int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp) This is passed to the inflation routine as s.avail_out = dstlen; where inflate from u-boot/lib_generic/zlib.c uses this to halt decompression if the image size can not fit. -- snip -- from int inflate(z, f) -- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) r = inflate_packet_flush(z->state->blocks); --snip -- from local int inflate_flush(s, z, r)-- /* compute number of bytes to copy as far as end of window */ n = (uInt)((q <= s->write ? s->write : s->end) - q); if (n > z->avail_out) n = z->avail_out; if (n && r == Z_BUF_ERROR) r = Z_OK; /* update counters */ z->avail_out -= n; z->total_out += n; -- When unc_len is increased - our problem goes away... So: two questions: - what is the best way to manage the size of unc_len? in include/configs/platform.h? Or just make it really_really big? - do you want a patch in u-boot/common/cmd_bootm.c/gunzip to check to see if the image was completely decompressed? OR - do you want a patch in u-boot/lib_generic/zlib.c to return an error if it runs out of room? Thanks -Robin

2 1

[U-Boot-Users] Why exceptions are enabled before exception vector code is copied
by Cedric VINCENT 13 Mar '06

13 Mar '06

Dear Wolfgang. Can I ask you why exceptions are enabled before exception vector code is copied to the low RAM pages ? (I am talking about U-Boot/PPC) On my board, U-Boot crashes before relocation (when debugging) since Xilinx Microprocessor Debugger (XMD) makes a spurious "Machine Check Exception". For other reasons, such an exception could arrived before u-boot starts. Finally, it is a bug or a very strange coding behaviour... Cedric VINCENT.

2 6

[U-Boot-Users] [PATCH] I2C2 support for MPC8548CDS
by Zajac Adam-AAZ004 13 Mar '06

13 Mar '06

The attached patch adds I2C2 support for the MPC8548CDS board. I've performed a limited testing on our MPC8548CDS board and everything seems to be working fine. Since this processor is brand new, I may need to revise the changes when we build our real system based on '8548. Thanks, Adam Zajac <<mpc8548cds_i2c2.patch.gz>>

2 1

[U-Boot-Users] malloc with no return check?
by Andrew Dyer 13 Mar '06

13 Mar '06

I noticed the au1xxx ethernet driver has a malloc where the return value isn't checked. I did some more looking while waiting for a slow flash programmer and at least these files seem to do the same thing: ./drivers/ns8382x.c ./drivers/bcm570x.c ./drivers/rtl8139.c ./drivers/eepro100.c ./drivers/dc2114x.c ./drivers/e1000.c ./drivers/sk98lin/skge.c ./drivers/cfb_console.c ./drivers/natsemi.c ./drivers/inca-ip_sw.c ./drivers/rtl8169.c ./drivers/pcnet.c ./cpu/mips/au1x00_eth.c ./cpu/ppc4xx/serial.c ./cpu/ppc4xx/405gp_enet.c ./cpu/ppc4xx/440gx_enet.c ./cpu/i386/serial.c ./cpu/mpc8xx/scc.c ./common/hush.c ./cpu/mpc8xx/spi.c ?maybe ./cpu/mpc8260/spi.c ?maybe ./cpu/mpc85xx/ether_fcc.c ./cpu/mpc8260/ether_fcc.c ./cpu/mpc5xxx/fec.c ./cpu/mpc8220/fec.c ./tools/easylogo/easylogo.c I didn't look under the board directory or check all varieties of alloc :-) I will submit patches for the mips stuff hopefully next week. -- Hardware, n.: The parts of a computer system that can be kicked.

3 4

[U-Boot-Users] [PATCH] in tftp client, recover from lost ACKs
by Brenda J. Butler 13 Mar '06

13 Mar '06

CHANGELOG entry: * Patch by John McCarthy and Brenda J. Butler, 8 July 2005 When the tftp client sends an ack but it gets lost, the server will resend the block. The client was now expecting the next block and ignored this block, the server never got an ack, and they got stuck. Now the tftp client will ack the block the second (and subsequent) time(s) allowing the tftp session to proceed. This little fix assumes that the server will resend exactly the same contents (same size from same offset). Here is the patch for you to look at; it is also in an attachment where the tabs and lines are preserved better. Apply to top of head checkout with patch -p0 < uboot2.patch Index: net/tftp.c =================================================================== RCS file: /u00/cvs/u-boot3/net/tftp.c,v retrieving revision 1.1 retrieving revision 1.3 diff -u -r1.1 -r1.3 --- net/tftp.c 15 Mar 2005 17:53:28 -0000 1.1 +++ net/tftp.c 5 Jul 2005 19:48:46 -0000 1.3 @@ -246,17 +246,17 @@ } } - if (TftpBlock == TftpLastBlock) { - /* - * Same block again; ignore it. - */ - break; - } - TftpLastBlock = TftpBlock; NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); - store_block (TftpBlock - 1, pkt + 2, len); + if (TftpBlock != TftpLastBlock) { + /* + * Same block again; do everything again + * except store it. Hope the server sent + * exactly the same length/contents. + */ + store_block (TftpBlock - 1, pkt + 2, len); + } /* * Acknoledge the block just received, which will prompt

2 1

[U-Boot-Users] [PATCH] fix [id]cache_status for MPC85xx processors
by Murray.Jensen＠csiro.au 13 Mar '06

13 Mar '06

The existing code for the [id]cache_status commands on MPC85xx processors looks at the wrong bit to determine if the L1 cache is enabled. It looks at the most significant bit when it should look at the least significant bit. This patch corrects this bug. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 19, 2005: - fix bug in [id]cache_status commands for MPC85xx processors; should look at LSB of L1CSRn registers to determine if L1 cache is enabled, not the MSB. Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] fix fw_setenv with uninitialised environment
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

In tools/env/fw_env.c when the environment is uninitialised, and the default_environment[] array is used instead, if a setenv is done there is a good chance that the array bounds will be exceeded. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 15, 2005: - fix array overflow with fw_setenv on uninitialised environment Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] PATCH: Add support for EmbeddedPlanet EP88x boards
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch adds support for EmbeddedPlanet EP88x boards. It was tested on EP88xC board with MPC885 processor, 64MB RAM, and 16MB flash. CHANGELOG Add support for EmbeddedPlanet EP88x boards -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

3 5

[U-Boot-Users] extra headers in xilinx ml300 board
by Michael Libeskind 12 Mar '06

12 Mar '06

/board/xilinx/xilinx_enet/emac_adapter.c and /board/xilinx/xilinx_iic/iic_adapter.c both have a #include <configs/ml300.h> which I believe prevents users from making other board configs under the /board/xilinx directory based on the ML300 that use the xilinx_enet and xilinx_iic adapaters. Can this be removed?

2 3

[U-Boot-Users] [PATCH] board support for the mpc8540eval board
by Ron Alder 12 Mar '06

12 Mar '06

The attached patch adds support for the MPC8540 EVAL board. The patch is based on the top of the cvs tree as of 11 July 2005. CHANGELOG entry: * Patch by Ron Alder, 11 July 2005 Add Xianghua Xiao and Lunsheng Wang's support for the GDA MPC8540 EVAL board.

2 1

[U-Boot-Users] [PATCH] add support for Nat Semi DP83865 PHY to MPC85xx TSEC driver
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds support for the National Semiconductor DP83865 gigabit ethernet PHY to the MPC85xx TSEC ethernet driver. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add Nat Semi DP83865 PHY support to MPC85xx TSEC driver Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] add (some) definitions for MPC85xx local bus controller
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds (some) definitions for the MPC85xx local bus controller register bits, in a similar vein to the MPC8260 memory controller, which is almost identical. Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add (some) definitions for the MPC85xx local bus controller Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] CPM I/O port pin functions for MPC85xx
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds the file "include/asm-ppc/iopin_85xx.h" which mirrors the functions in "include/asm-ppc/iopin_8260.h" for manipulating the CPM2 I/O pins for MPC85xx processors (that have a CPM). Cheers! Murray... CHANGELOG entry: * Patch by Murray Jensen <Murray.Jensen(a)csiro.au>, July 8, 2005: - add CPM2 I/O pin functions for MPC85xx processors Copyright: This patch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] fix conditional for including ks8695eth driver
by Greg Ungerer 12 Mar '06

12 Mar '06

Move the c-preprocessor conditional check for compiling the ks8695eth driver code to after including the headers. Otherwise it can never be compiled in. Index: drivers/ks8695eth.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/ks8695eth.c,v retrieving revision 1.2 diff -u -r1.2 ks8695eth.c --- drivers/ks8695eth.c 23 May 2005 10:49:51 -0000 1.2 +++ drivers/ks8695eth.c 3 Jun 2005 14:13:54 -0000 @@ -18,8 +18,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifdef CONFIG_DRIVER_KS8695ETH - /****************************************************************************/ #include <common.h> @@ -28,6 +26,7 @@ #include <asm/io.h> #include <asm/arch/platform.h> +#ifdef CONFIG_DRIVER_KS8695ETH /****************************************************************************/ /*

3 3

[U-Boot-Users] [PATCH] dhcp vendor fields - support opt bootfile, ignore tftp server
by Murray.Jensen＠csiro.au 12 Mar '06

12 Mar '06

This patch adds support for the dhcp vendor optional bootfile (#67). It also ignores the vendor tftp server name option (#66). Both of these are supplied by the DEC Tru64 Unix dhcp server (called "join"), and in the case of the bootfile, it is the only place the boot file name is supplied. There is a perfectly good, 128 byte, field in the main bootp/dhcp packet where the boot file name could have been stored, but it wasn't used - go figure. Cheers! Murray... -- Murray Jensen, CSIRO Manufacturing & Infra. Tech. Phone: +61 3 9662 7763 Locked Bag No. 9, Preston, Vic, 3072, Australia. Fax: +61 3 9662 7853 Internet: Murray.Jensen(a)csiro.au To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference. The information contained in this e-mail may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this e-mail in error, please delete it immediately and notify Murray Jensen on +61 3 9662 7763. Thank you.

2 1

[U-Boot-Users] [PATCH] Fix RGMII support in 8548 CDS
by Andy Fleming 12 Mar '06

12 Mar '06

This patch fixes a hw timing issue on 8548 CDS for eTSEC 3 in RGMII mode: Index: tsec.h =================================================================== RCS file: /cm/vault/u-boot/u-boot/cpu/mpc85xx/tsec.h,v retrieving revision 1.1.1.1.4.6 diff -r1.1.1.1.4.6 tsec.h 111c111 < #define MIIM_CIS8204_EPHYCON_RGMII 0x1000 --- > #define MIIM_CIS8204_EPHYCON_RGMII 0x1100

2 1

[U-Boot-Users] LXT971A PHY debugging on MPC8540 Custom Board
by Shirasat Girish-ags032 12 Mar '06

12 Mar '06

Hi , I have partially ported Uboot on one of our MPC8540 based custom boards. I am currently facing problems in bringing up the 10/100Mbps FEC interface. We are using the LXT971A PHY for the FEC interface. Well the problem is that , the MAC is putting out the data but the PHY is failing to put the data on the line. The PHY is successfully able to auto- negotiate. The MAC putting out data was confirmed by the MAC debug registers and by probing the Tx_EN,clock and TX_D lines. I carried out the MAC loop back test which passed . Then went on for the PHY internal loop back test. Well, when the loop back is enabled the MAC fails to transmit the frame successfully. The thing confusing me is that why the MAC frame transmission is getting affected when i enable the PHY loopback test. Any pointers will be very helpful. Regards, Girish

3 3

[U-Boot-Users] [Patch][CVS] Updating for RPXlite_DW---20050619
by Sam Song 12 Mar '06

12 Mar '06

Hi list, To make things better on RPXlite DW board with more flexible functions, a small patch added and tested. I change ifdef to make this patch work online this time. Best regards, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Add netconsole and several useful commands. ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: include/configs/RPXlite_DW.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/RPXlite_DW.h,v retrieving revision 1.6 diff -p -u -r1.6 RPXlite_DW.h --- include/configs/RPXlite_DW.h 22 Jan 2005 18:13:06 -0000 1.6 +++ include/configs/RPXlite_DW.h 19 Jun 2005 13:44:10 -0000 @@ -45,7 +45,7 @@ */ /* #define DEBUG 1 */ -/* #ifdef DEPLOYMENT 1 */ +/* #define DEPLOYMENT 1 */ #undef CONFIG_MPC860 #define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ @@ -117,6 +117,36 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +#if 1 /* Enable this staff could make image enlarge about 25KB. Mask it if you + don't want the advanced function */ + +#ifdef CONFIG_SPLASH_SCREEN +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#else +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#endif /* CONFIG_SPLASH_SCREEN */ + +/* test-only */ +#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ +#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + +#define CONFIG_NETCONSOLE + +#endif /* 1 */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -446,5 +476,6 @@ #define CONFIG_SERVERIP 172.16.115.6 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/ #define CONFIG_BOOTFILE uImage.rpxusb +#define CONFIG_HOSTNAME LITE_H1_DW #endif /* __CONFIG_H */

2 1

[U-Boot-Users] [Patch][CVS] Fix a dummy pci prototype declaration
by Sam Song 12 Mar '06

12 Mar '06

Hi list, I happened to find the mistaken declaration on pci_cfgfunc_nothing in include/pci.h. Thanks for Wolfgang help me confirm that:-) Best regards, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Fix the mistaken declaration on pci_cfgfunc_nothing Best regards, Sam ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: include/pci.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/pci.h,v retrieving revision 1.3 diff -p -u -r1.3 pci.h --- include/pci.h 31 May 2003 18:35:28 -0000 1.3 +++ include/pci.h 19 Jun 2005 12:57:39 -0000 @@ -336,8 +336,8 @@ struct pci_config_table { unsigned long priv[3]; }; -extern void pci_cfgfunc_nothing(struct pci_controller* hose, pci_dev_t dev, - struct pci_config_table *); +extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev, + struct pci_config_table *); extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *);

2 1

[U-Boot-Users] [Patch][CVS] Adjust CFG_CMD_ECHO as default ENV setting
by Sam Song 12 Mar '06

12 Mar '06

Hi list, Attached patch makes up a fix on CFG_CMD_ECHO. To avoid breaking exists boards, I adjust "echo" as a default command with aggreement of Wolfgang. For the sake of it's effect on all boards, pls check this one more carefully. About 12 boards related was fixed as well. Fix policy is that if CONFIG_CMD_DFL is used, CFG_CMD_ECHO shouldn't be redefined. Did I fix too much or not enough? Ideas pls... Sorry for the late. I just made my PC get CVS tree:-( CVS hasn't supported proxy. It brings me some troubles more or less. Thanks for all your concern, Sam CHANGELOG: * Patch by Sam Song, 19 June 2005: - Adjust echo as a defalut command. Best regards, Sam ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com/?id=77071 Index: README =================================================================== RCS file: /cvsroot/u-boot/u-boot/README,v retrieving revision 1.126 diff -p -u -r1.126 README --- README 3 May 2005 14:12:25 -0000 1.126 +++ README 19 Jun 2005 12:27:42 -0000 @@ -590,7 +590,7 @@ The following options need to be configu CFG_CMD_DIAG * Diagnostics CFG_CMD_DOC * Disk-On-Chip Support CFG_CMD_DTT * Digital Therm and Thermostat - CFG_CMD_ECHO * echo arguments + CFG_CMD_ECHO echo arguments CFG_CMD_EEPROM * EEPROM read/write support CFG_CMD_ELF * bootelf, bootvx CFG_CMD_ENV saveenv Index: common/command.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/command.c,v retrieving revision 1.18 diff -p -u -r1.18 command.c --- common/command.c 6 Apr 2005 00:04:17 -0000 1.18 +++ common/command.c 19 Jun 2005 12:27:51 -0000 @@ -42,6 +42,8 @@ U_BOOT_CMD( NULL ); +#if (CONFIG_COMMANDS & CFG_CMD_ECHO) + int do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -74,6 +76,8 @@ U_BOOT_CMD( " - echo args to console; \\c suppresses newline\n" ); +#endif /* CFG_CMD_ECHO */ + #ifdef CFG_HUSH_PARSER int Index: include/cmd_confdefs.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/cmd_confdefs.h,v retrieving revision 1.22 diff -p -u -r1.22 cmd_confdefs.h --- include/cmd_confdefs.h 1 Apr 2005 00:25:45 -0000 1.22 +++ include/cmd_confdefs.h 19 Jun 2005 12:27:53 -0000 @@ -110,7 +110,6 @@ CFG_CMD_DIAG | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_EXT2 | \ Index: include/configs/ISPAN.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ISPAN.h,v retrieving revision 1.2 diff -p -u -r1.2 ISPAN.h --- include/configs/ISPAN.h 31 Dec 2004 09:32:53 -0000 1.2 +++ include/configs/ISPAN.h 19 Jun 2005 12:27:55 -0000 @@ -108,7 +108,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ Index: include/configs/MIP405.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/MIP405.h,v retrieving revision 1.10 diff -p -u -r1.10 MIP405.h --- include/configs/MIP405.h 23 Feb 2004 22:22:33 -0000 1.10 +++ include/configs/MIP405.h 19 Jun 2005 12:27:56 -0000 @@ -58,7 +58,6 @@ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ Index: include/configs/PIP405.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/PIP405.h,v retrieving revision 1.8 diff -p -u -r1.8 PIP405.h --- include/configs/PIP405.h 20 Jan 2004 23:12:34 -0000 1.8 +++ include/configs/PIP405.h 19 Jun 2005 12:27:57 -0000 @@ -50,7 +50,6 @@ CFG_CMD_PCI | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO | \ Index: include/configs/RPXsuper.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/RPXsuper.h,v retrieving revision 1.3 diff -p -u -r1.3 RPXsuper.h --- include/configs/RPXsuper.h 20 Jan 2004 23:12:34 -0000 1.3 +++ include/configs/RPXsuper.h 19 Jun 2005 12:27:58 -0000 @@ -154,7 +154,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_IMMAP | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO & \ ~CFG_CMD_KGDB ) Index: include/configs/Rattler.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/Rattler.h,v retrieving revision 1.2 diff -p -u -r1.2 Rattler.h --- include/configs/Rattler.h 5 May 2005 09:13:21 -0000 1.2 +++ include/configs/Rattler.h 19 Jun 2005 12:27:59 -0000 @@ -125,7 +125,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_MII \ Index: include/configs/TQM5200.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/TQM5200.h,v retrieving revision 1.12 diff -p -u -r1.12 TQM5200.h --- include/configs/TQM5200.h 2 Apr 2005 22:37:55 -0000 1.12 +++ include/configs/TQM5200.h 19 Jun 2005 12:28:00 -0000 @@ -161,7 +161,6 @@ CFG_CMD_ASKENV | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_MII | \ Index: include/configs/ZPC1900.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ZPC1900.h,v retrieving revision 1.5 diff -p -u -r1.5 ZPC1900.h --- include/configs/ZPC1900.h 9 Oct 2004 23:33:43 -0000 1.5 +++ include/configs/ZPC1900.h 19 Jun 2005 12:28:01 -0000 @@ -112,7 +112,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ Index: include/configs/gw8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/gw8260.h,v retrieving revision 1.2 diff -p -u -r1.2 gw8260.h --- include/configs/gw8260.h 27 Jun 2003 21:32:46 -0000 1.2 +++ include/configs/gw8260.h 19 Jun 2005 12:28:02 -0000 @@ -305,7 +305,6 @@ CFG_CMD_BEDBUG | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_IMMAP | \ CFG_CMD_MII) Index: include/configs/ppmc8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/ppmc8260.h,v retrieving revision 1.4 diff -p -u -r1.4 ppmc8260.h --- include/configs/ppmc8260.h 25 Mar 2004 15:14:45 -0000 1.4 +++ include/configs/ppmc8260.h 19 Jun 2005 12:28:04 -0000 @@ -279,7 +279,6 @@ #define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_MEMTEST | \ CFG_CMD_MII | \ Index: include/configs/sacsng.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/sacsng.h,v retrieving revision 1.7 diff -p -u -r1.7 sacsng.h --- include/configs/sacsng.h 25 Mar 2004 15:14:45 -0000 1.7 +++ include/configs/sacsng.h 19 Jun 2005 12:28:07 -0000 @@ -507,7 +507,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ @@ -520,7 +519,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ Index: include/configs/sbc8260.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/sbc8260.h,v retrieving revision 1.11 diff -p -u -r1.11 sbc8260.h --- include/configs/sbc8260.h 11 Jul 2004 21:49:43 -0000 1.11 +++ include/configs/sbc8260.h 19 Jun 2005 12:28:09 -0000 @@ -448,7 +448,6 @@ #ifdef CONFIG_ETHER_ON_FCC # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ @@ -459,7 +458,6 @@ #else # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ Index: include/configs/utx8245.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/utx8245.h,v retrieving revision 1.3 diff -p -u -r1.3 utx8245.h --- include/configs/utx8245.h 5 Jun 2003 15:40:53 -0000 1.3 +++ include/configs/utx8245.h 19 Jun 2005 12:28:10 -0000 @@ -91,7 +91,6 @@ protect on $(u-boot_startaddr) $(u-boot_ | CFG_CMD_ENV | CFG_CMD_CONSOLE \ | CFG_CMD_LOADS | CFG_CMD_LOADB \ | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_RUN | CFG_CMD_ECHO \ | CFG_CMD_REGINFO | CFG_CMD_NET\ | CFG_CMD_DHCP | CFG_CMD_I2C \ | CFG_CMD_DATE)

2 1

[U-Boot-Users] Patch to cpu/mpc8260/speed.c
by KokHow Teh 12 Mar '06

12 Mar '06

Hi; I am using u-boot-1.1.2 and I am sending this minor patch to the cpu/mpc8260/speed.c file in view of MPC8280EC document which lays down how the PCIDF is calculated but not reflected correctly in the file. Index: cpu/mpc8260/speed.c =================================================================== RCS file: /usr/cvsroot/u-boot/cpu/mpc8260/speed.c,v retrieving revision 1.2 diff -u -b -B -r1.2 speed.c --- cpu/mpc8260/speed.c 28 Apr 2005 07:01:04 -0000 1.2 +++ cpu/mpc8260/speed.c 16 Jun 2005 04:35:12 -0000 @@ -202,11 +202,12 @@ volatile immap_t *immap = (immap_t *) CFG_IMMR; ulong sccr, dfbrg; - ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf; + ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf; corecnf_t *cp; sccr = immap->im_clkrst.car_sccr; dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; + pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; scmr = immap->im_clkrst.car_scmr; corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT; @@ -243,8 +244,8 @@ cp->vco_div, cp->freq_60x, cp->freq_core); printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, " - "plldf %ld, pllmf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf, - pllmf); + "plldf %ld, pllmf %ld, pcidf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf, + pllmf, pcidf); printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n", gd->vco_out, gd->scc_clk, gd->brg_clk); @@ -253,10 +254,18 @@ gd->cpu_clk, gd->cpm_clk, gd->bus_clk); if (sccr & SCCR_PCI_MODE) { - uint pci_div; + uint pci_div, pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * - ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + if (sccr & SCCR_PCI_MODCK) { + pci_div = 2; + if (pcidf == 9) + pci_div *= 5; + else if (pcidf == 0xB) + pci_div *= 6; + else + pci_div *= (pcidf + 1); + } else + pci_div = pcidf + 1; printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div); } Regards, TEH

2 1

[U-Boot-Users] Patch to fix jffs2's lack of "data crc".
by Rick Bronson 12 Mar '06

12 Mar '06

1. A description of the bug: When jffs2 reads files it crc's the header but not the data. If the data is corrupt it can cause jffs2 to accept a chunk when it shouldn't. My patch adds in code to crc the data. 2. A CHANGELOG entry Add crc of data to jffs2 (in jffs2_1pass_build_lists()).

2 1

[U-Boot-Users] parser problem?
by Andrew Dyer 12 Mar '06

12 Mar '06

I noticed on my board that if I enter a space and then return at the u-boot command line I get an exception. I using u-boot from cvs and the standard (not hush) parser on a mips platform. Does anybody else see this behaviour? -- Hardware, n.: The parts of a computer system that can be kicked.

2 3

[U-Boot-Users] byteorder of image_header_t members?
by Steven Scholz 12 Mar '06

12 Mar '06

Hi there, if uint32_t members of image_header_t are stored in network byteorder, then all references of these members should use ntohl(), right? So should we fix this for instance: #~> grep "\->ih_magic" * cmd_autoscript.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_bootm.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { >>> cmd_bootm.c: if (hdr->ih_magic != IH_MAGIC) { <<< cmd_bootm.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_bootm.c: (ntohl(hdr->ih_magic) != IH_MAGIC)) >>> cmd_doc.c: if (hdr->ih_magic == IH_MAGIC) { <<< >>> cmd_fdc.c: if (hdr->ih_magic != IH_MAGIC) { <<< cmd_fpga.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_ide.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { cmd_nand.c: if (ntohl(hdr->ih_magic) == IH_MAGIC) { cmd_scsi.c: if (ntohl(hdr->ih_magic) == IH_MAGIC) { cmd_usb.c: if (ntohl(hdr->ih_magic) != IH_MAGIC) { -- Steven

2 4

[U-Boot-Users] PATCH: Switch FADS family boards to new clock mechanism
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch switches MPC86xADS and MPC885ADS boards (FADS family) to new clock control mechanism (clocks are controlled by environment variable). Also, board revision detection is fixed. CHANGELOG - Switch MPC86xADS and MPC885ADS boards to use cpuclk environment variable to set clock -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1

[U-Boot-Users] PATCH: RPXlite configuration fixes
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch fixes several bugs in and adds some features to long orphaned RPXlite port. CHANGELOG Fix RPXlite board configuration. - Use correct flash sector size - Use correct memory test end address - Add support for bzip2 compression - Various small fixes -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

3 16

[U-Boot-Users] PATCH: Numerous fixes for ZPC.1900 port
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch fixes memory configuration for Zephyr Engineering ZPC.1900 board. CHANGELOG Memory configuration changes for ZPC.1900 board - Fix SDRAM timing on both local bus and 60x bus - Add support for second flash bank (SIMM) - Change boot flash base -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1

[U-Boot-Users] PATCH: Add support for Adder boards with 16MB SDRAM
by Yuli Barcohen 12 Mar '06

12 Mar '06

The attached patch adds support for Analogue&Micro Adder boards with 16MB SDRAM (current configuration supports 8MB only). Also, added support for second FEC on Adder87x board. CHANGELOG - Add support for Adder boards with 16MB SDRAM - Add support for second FEC on Adder87x board -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1

[U-Boot-Users] [PATCH] include top config.mk only after CROSS_COMPILE is defined
by Friedrich Lobenstock 12 Mar '06

12 Mar '06

Hi Wolfgang! During compiling I just spotted the fact that gccincdir := $(shell $(CC) -print-file-name=include) in the top config.mk does execute "gcc -print-file-name=include" instead of "m68k-elf-gcc ..." which I would expect as i compile for m68k. I think that this does not make much difference as the includes should mostly be the same, but for the sake of completeness I want to bring the attached patch to your attention. Description of the patch: * CROSS_COMPILE is referenced in the top 'config.mk' file therefore we need to include it in the main Makefile only after CROSS_COMPILE is defined This patch is against the u-boot-1.1.2. -- MfG / Regards Friedrich Lobenstock --- u-boot-1.1.2-org/Makefile 2004-12-19 10:58:11.000000000 +0100 +++ u-boot-1.1.2/Makefile 2005-06-01 18:35:44.000000000 +0200 @@ -46,9 +46,6 @@ # load ARCH, BOARD, and CPU configuration include include/config.mk export ARCH CPU BOARD VENDOR SOC -# load other configuration -include $(TOPDIR)/config.mk - ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = @@ -86,6 +83,10 @@ export CROSS_COMPILE +# load other configuration +include $(TOPDIR)/config.mk + + ######################################################################### # U-Boot objects....order is important (i.e. start must be first)

3 3

[U-Boot-Users] [PATCH] soft_i2c/i2c_probe(): Perform reads instead of writes
by Peter Korsgaard 12 Mar '06

12 Mar '06

Hi, The following little patch makes the i2c_probe function use reads instead of writes to match the comment (broken in r1.2). * Patch by Peter Korsgaard, 26 May 2005: Use reads instead of writes for probe in soft_i2c. -- Bye, Peter Korsgaard

4 6

[U-Boot-Users] [PATCH] add OpenGear CM4008 board support
by Greg Ungerer 12 Mar '06

12 Mar '06

Hi All, Attached is a patch that adds support to u-boot for the OpenGear CM4008 8 port console manager board. It is built around the KS8695P CPU, with 8 serial ports, 16MB RAM, and 8MB NOR flash. This patch was originally generated against u-boot 1.1.1. Regards Greg diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/cm4008.c u-boot/board/cm4008/cm4008.c --- u-boot-1.1.1/board/cm4008/cm4008.c 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/cm4008.c 2005-05-04 22:47:00.021931928 +1000 @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2005 + * Greg Ungerer, OpenGear Inc, <greg.ungerer(a)opengear.com> + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris(a)nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/platform.h> + +/* ------------------------------------------------------------------------- */ + +#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) +#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b) + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ +int env_flash_cmdline (void) +{ + unsigned char *sp = (unsigned char *) 0x0201c020; + unsigned char *ep; + int len; + + /* Check if "erase" push button is depressed */ + if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) { + printf("### Entering network recovery mode...\n"); + setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0"); + setenv("bootcmd", "bootp 0x400000; gofsk 0x400000"); + setenv("bootdelay", "2"); + return 0; + } + + /* Check for flash based kernel boot args to use as default */ + for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++) + ; + + if ((len > 0) && (len <1024)) + setenv("bootargs", sp); + + return 0; +} + +int board_late_init (void) +{ + return 0; +} + + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of CM4008 */ + gd->bd->bi_arch_number = 624; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x00000100; + + /* power down all but port 0 on the switch */ + ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005); + ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005); + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/config.mk u-boot/board/cm4008/config.mk --- u-boot-1.1.1/board/cm4008/config.mk 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/config.mk 2005-01-11 00:56:42.000000000 +1000 @@ -0,0 +1 @@ +TEXT_BASE = 0x00f00000 diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/flash.c u-boot/board/cm4008/flash.c --- u-boot-1.1.1/board/cm4008/flash.c 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/flash.c 2005-01-17 00:55:13.000000000 +1000 @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2005 + * Greg Ungerer, OpenGear Inc, greg.ungerer(a)opengear.com + * + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris(a)nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/byteorder/swab.h> + + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (unsigned char * addr, flash_info_t * info); +static int write_data (flash_info_t * info, ulong dest, unsigned char data); +static void flash_get_offsets (ulong base, flash_info_t * info); +void inline spin_wheel (void); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + int i; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + switch (i) { + case 0: + flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); + break; + case 1: + /* ignore for now */ + flash_info[i].flash_id = FLASH_UNKNOWN; + break; + default: + panic ("configured too many flash banks!\n"); + break; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + _bss_start - _armboot_start, + &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) + return; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (unsigned char * addr, flash_info_t * info) +{ + volatile unsigned char value; + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = 0xAA; + addr[0x2AAA] = 0x55; + addr[0x5555] = 0x90; + + mb (); + value = addr[0]; + + switch (value) { + + case (unsigned char)INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = 0xFF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[2]; /* device ID */ + + switch (value) { + + case (unsigned char)INTEL_ID_28F640J3A: + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 0x00800000; + break; /* => 8 MB */ + + case (unsigned char)INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000; + break; /* => 16 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = 0xFF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + else + printf ("\n"); + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + volatile unsigned char *addr; + unsigned char status; + + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + addr = (volatile unsigned char *) (info->start[sect]); + *addr = 0x50; /* clear status register */ + *addr = 0x20; /* erase setup */ + *addr = 0xD0; /* erase confirm */ + + while (((status = *addr) & 0x80) != 0x80) { + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = 0xB0; /* suspend erase */ + *addr = 0xFF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = 0x50; /* clear status register cmd */ + *addr = 0xFF; /* resest to read mode */ + + printf (" done\n"); + } + } + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp; + unsigned char data; + int count, i, l, rc, port_width; + + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + wp = addr; + port_width = 1; + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, data)) != 0) { + return (rc); + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, data)) != 0) { + return (rc); + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (); + count = 0; + } + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_data (info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t * info, ulong dest, unsigned char data) +{ + volatile unsigned char *addr = (volatile unsigned char *) dest; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = 0x40; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & 0x80) != 0x80) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = 0xFF; /* restore read mode */ + return (1); + } + } + + *addr = 0xFF; /* restore read mode */ + + return (0); +} + +void inline spin_wheel (void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf ("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/Makefile u-boot/board/cm4008/Makefile --- u-boot-1.1.1/board/cm4008/Makefile 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/Makefile 2004-11-02 00:38:51.000000000 +1000 @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000, 2002 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := cm4008.o flash.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naur --exclude=CVS u-boot-1.1.1/board/cm4008/u-boot.lds u-boot/board/cm4008/u-boot.lds --- u-boot-1.1.1/board/cm4008/u-boot.lds 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/board/cm4008/u-boot.lds 2004-11-05 00:27:11.000000000 +1000 @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/ks8695/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -Naur --exclude=CVS u-boot-1.1.1/include/configs/cm4008.h u-boot/include/configs/cm4008.h --- u-boot-1.1.1/include/configs/cm4008.h 1970-01-01 10:00:00.000000000 +1000 +++ u-boot/include/configs/cm4008.h 2005-03-20 22:31:27.000000000 +1000 @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004 + * Greg Ungerer <greg.ungerer(a)opengear.com>. + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ +#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CFG_ENV_IS_NOWHERE +#define CONFIG_SERIAL1 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> +#undef CONFIG_COMMANDS +#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" +#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00800000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00008000 /* default load address */ + +#define CFG_HZ (1000) /* 1ms resolution ticks */ + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ + +#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ + +#endif /* __CONFIG_H */ diff -Naur --exclude=CVS u-boot-1.1.1/Makefile u-boot/Makefile --- u-boot-1.1.1/Makefile 2004-04-25 09:23:30.000000000 +1000 +++ u-boot/Makefile 2005-03-12 23:06:59.000000000 +1000 @@ -1040,6 +1040,11 @@ VCMA9_config : unconfig @./mkconfig $(@:_config=) arm arm920t vcma9 mpl +cm4008_config : unconfig + @./mkconfig $(@:_config=) arm ks8695 cm4008 + +cm41xx_config : unconfig + @./mkconfig $(@:_config=) arm ks8695 cm41xx ######################################################################### ## S3C44B0 Systems

2 16

[U-Boot-Users] [PATCH] revised word alignment fixes for word aligned NS16550 UART
by jean-paul.saman＠philips.com 12 Mar '06

12 Mar '06

The patch is created against current CVS 2005 march 1st and fixes problems for boards that only have word access to the NS16550 UART. OBSOLETES: From: Jean-Paul Saman Date: 23-02-2005 Subject: [PATCH] word alignment fixes for word aligned NS16550 UART peripheral CHANGELOG: * Patch by Jean-Paul Saman, 23 Feb 2005 - include/ns16550.h Fixes alignement bug with UART that only supports word aligned access: removed "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" GCC generates bytes access when it encounters the packed attribute regardless if the struct is already word aligned for a platform. Peripherals that can only handle word aligned access won't work properly when accessed with byte access. The struct NS16550 is already word aligned for REG_SIZE = 4, so there is no need to packed the struct in that case. Kind greetings, Jean-Paul Saman Philips Semiconductors CTO/RTG Philips HighTech Campus, building WDB 3.29 Professor van den Holstlaan 4 5655 AA Eindhoven tel: +31 (0)40 27 45131

2 1

[U-Boot-Users] Suspect behaiviour if gatewayip not set
by Robin Gilks 12 Mar '06

12 Mar '06

Greetings Having played with netconsole a bit, I've observed that the current behaiviour of warning if gatewayip is not set and then using its value of zero when talking to outside the current subnet is somewhat suspect. The particular case of netconsole means that no error message is evident - it is trying to be sent the error down the ethernet connection that is being initiated with an arp(0.0.0.0)! I propose that the warning message stay but the target address is put into the arp so that a proxying router can reply to it rather then send out a nonsense arp request. CHANGELOGg: * Patch by Robin Gilks 23 December 2004 net.c - if gatewayip not set send arp request for destination IP not zero --- net.c.old 2004-10-26 12:46:58.000000000 +1300 +++ net.c 2004-12-23 09:42:46.000000000 +1300 @@ -207,8 +207,10 @@ (NetOurIP & NetOurSubnetMask)) { if (NetOurGatewayIP == 0) { puts ("## Warning: gatewayip needed but not set\n"); + NetArpWaitReplyIP = NetArpWaitPacketIP; + } else { + NetArpWaitReplyIP = NetOurGatewayIP; } - NetArpWaitReplyIP = NetOurGatewayIP; } else { NetArpWaitReplyIP = NetArpWaitPacketIP; } -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks(a)tait.co.nz New Zealand ======================================================================= This email, including any attachments, is only for the intended addressee. It is subject to copyright, is confidential and may be the subject of legal or other privilege, none of which is waived or lost by reason of this transmission. If the receiver is not the intended addressee, please accept our apologies, notify us by return, delete all copies and perform no other act on the email. Unfortunately, we cannot warrant that the email has not been altered or corrupted during transmission. =======================================================================

2 1

[U-Boot-Users] [PATCH] CFI support for Versatile & Integrator/CP boards
by Peter Pearse 28 Feb '06

28 Feb '06

The attached gzipped patch was made against the U-Boot GIT head of Oct 31 2005. It is my patch number 012. The patch is independent of patches 009 & 010, but dependent on patch 011. The patch updates the versatile and integrator/CP boards code to use CFI flash, rather than having a hardware dependent flash.c. CHANGELOG: Versatile & Integrator/CP to use CFI flash.. Patch by Peter Pearse, 31st Oct 2005

6 11

[U-Boot-Users] Patch for drivers/cfi_flash.c; properly detect write errors.
by Marcus Hall 28 Feb '06

28 Feb '06

Hello.. It seems that there is a minor problem in cfi_flash.c that prevents it from detecting that a flash write error has occurred. The first change in the attached patch is trivial, it just makes the strings output for a protected and a non-protected sector have the same length so the output looks prettier.. The second change is in flash_full_status_check(). We have just called flash_status_check() and then did a switch() on the vendor. For intel, we *should* check if there are any error bits if the previous call returned ERR_OK (Otherwise we will have output an error message in flash_status_check() already.) The original code would only check for error bits if flash_status_check() returns ERR_TIMEOUT. -- Marcus Hall marcushall(a)lucent.com *** ../u-boot-1.1.3/drivers/cfi_flash.c Sat Aug 13 17:53:35 2005 --- u-boot-1.1.3/drivers/cfi_flash.c Tue Aug 23 14:47:06 2005 *************** *** 502,508 **** if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", ! info->start[i], info->protect[i] ? " (RO) " : " "); #endif } putc ('\n'); --- 502,508 ---- if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", ! info->start[i], info->protect[i] ? " (RO)" : " "); #endif } putc ('\n'); *************** *** 718,724 **** switch (info->vendor) { case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: ! if ((retcode != ERR_OK) && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf ("Flash %s error at address %lx\n", prompt, --- 718,724 ---- switch (info->vendor) { case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: ! if ((retcode == ERR_OK) && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf ("Flash %s error at address %lx\n", prompt,

2 1

[U-Boot-Users] [PATCH] cfi_flash.c patches
by Sangmoon Kim 28 Feb '06

28 Feb '06

Hi, The two patches attached are for drivers/cfi_flash.c. cfi_flash-protect.patch adds CFG_FLASH_PROTECT_CLEAR because for some flash memories(such as 28F320C3) all banks are protected after reset. cfi_flash-buffer.patch makes write_buff not to call flash_write_cfibuffer if buffer_size is1. Because for flash memories with buffer_size 1, buffer write is not supported. Regards, Sangmoon Kim

7 28

[U-Boot-Users] PATCH for drivers/cfi_flash.c
by Tolunay Orkun 28 Feb '06

28 Feb '06

This patch reworks the patch submitted on May 6, 2005: Ref: http://sourceforge.net/mailarchive/message.php?msg_id=11674386 This patch (cfi_flash.patch.tolunay) is prepared against current CVS version + Peter Pearse Patch dated March 15, 2005. Ref: http://sourceforge.net/mailarchive/message.php?msg_id=11164812 CHANGELOG: * Patch by Tolunay Orkun, 02 July 2005: Fixes for drivers/cfi_flash.c: - Fix wrong timeout value usage in flash_status_check() - Round write_tout up when converting to msec in flash_get_size() - Remove clearing flash status at the end of flash_write_cfibuffer() which sets Intel 28F640J3 flash back to command mode on CSB472 ~~~ In case Peter's Patch is rejected for some reason please apply the alternate patch (cfi_flash.patch.tolunay2) instead. It makes one additional fix that I had submitted in my original patch. CHANGELOG (Alternate) * Patch by Tolunay Orkun, 02 July 2005: Fixes for drivers/cfi_flash.c: - Fix wrong timeout value usage in flash_status_check() - Round write_tout up when converting to msec in flash_get_size() - Remove clearing flash status at the end of flash_write_cfibuffer() which sets Intel 28F640J3 flash back to command mode on CSB472 - Fix incorrect if condition in flash_full_status_check() Best regards, Tolunay Orkun Index: drivers/cfi_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/cfi_flash.c,v retrieving revision 1.18 diff -p -u -r1.18 cfi_flash.c --- drivers/cfi_flash.c 16 May 2005 15:23:24 -0000 1.18 +++ drivers/cfi_flash.c 2 Jul 2005 23:45:50 -0000 @@ -694,7 +694,7 @@ static int flash_status_check (flash_inf /* Wait for command completion */ start = get_timer (0); while (flash_is_busy (info, sector)) { - if (get_timer (start) > info->erase_blk_tout * CFG_HZ) { + if (get_timer (start) > tout) { printf ("Flash %s timeout at address %lx data %lx\n", prompt, info->start[sector], flash_read_long (info, sector, 0)); @@ -1113,8 +1113,9 @@ static ulong flash_get_size (ulong base, info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); info->buffer_write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT))) / 1000; + tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) * + (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT)); + info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ info->flash_id = FLASH_MAN_CFI; if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) { info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */ @@ -1281,7 +1282,6 @@ static int flash_write_cfibuffer (flash_ info->buffer_write_tout, "buffer write"); } - flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; } #endif /* CFG_FLASH_USE_BUFFER_WRITE */ Index: drivers/cfi_flash.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/cfi_flash.c,v retrieving revision 1.18 diff -p -u -r1.18 cfi_flash.c --- drivers/cfi_flash.c 16 May 2005 15:23:24 -0000 1.18 +++ drivers/cfi_flash.c 2 Jul 2005 23:52:15 -0000 @@ -694,7 +694,7 @@ static int flash_status_check (flash_inf /* Wait for command completion */ start = get_timer (0); while (flash_is_busy (info, sector)) { - if (get_timer (start) > info->erase_blk_tout * CFG_HZ) { + if (get_timer (start) > tout) { printf ("Flash %s timeout at address %lx data %lx\n", prompt, info->start[sector], flash_read_long (info, sector, 0)); @@ -719,7 +719,7 @@ static int flash_full_status_check (flas case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: if ((retcode != ERR_OK) - && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { + || !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf ("Flash %s error at address %lx\n", prompt, info->start[sector]); @@ -1113,8 +1113,9 @@ static ulong flash_get_size (ulong base, info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); info->buffer_write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT))) / 1000; + tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) * + (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT)); + info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ info->flash_id = FLASH_MAN_CFI; if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) { info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */ @@ -1281,7 +1282,6 @@ static int flash_write_cfibuffer (flash_ info->buffer_write_tout, "buffer write"); } - flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; } #endif /* CFG_FLASH_USE_BUFFER_WRITE */

2 1

[U-Boot-Users] cfi_flash.c patch
by richard＠uclinux.net 28 Feb '06

28 Feb '06

Afternoon... Adding 2 spaces in cfi_flash.c makes the output of "flinfo" much more readable if there are protected and unprotected sectors: rick ---------------------------------------------------------------------------- CHANGELOG: * Patch by Richard Klingler, 09 Apr 2005: correct column layout of flinfo output. --- u-boot.orig/drivers/cfi_flash.c 2005-01-09 19:12:33.000000000 +0200 +++ u-boot/drivers/cfi_flash.c 2005-04-09 16:35:04.000000000 +0300 @@ -483,7 +483,7 @@ void flash_print_info (flash_info_t * in if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO) " : " "); + info->start[i], info->protect[i] ? " (RO) " : " "); #endif } putc ('\n');

3 3

[U-Boot-Users] PATCH: minor bugs fix in cfi_driver.c
by Pierre AUBERT 28 Feb '06

28 Feb '06

Please find attached a little patch against current CVS. CHANGELOG: * Patch by Pierre Aubert 09 Dec 2004 - Fix flash information strings alignement in cfi_driver.c - Fix monitor size for flash protection in cfi_driver.c Best regards diff -pur u-boot/drivers/cfi_flash.c u-boot-paub/drivers/cfi_flash.c --- u-boot/drivers/cfi_flash.c 2004-10-11 01:27:35.000000000 +0200 +++ u-boot-paub/drivers/cfi_flash.c 2004-12-09 10:11:31.000000000 +0100 @@ -334,7 +334,7 @@ unsigned long flash_init (void) #if (CFG_MONITOR_BASE >= CFG_FLASH_BASE) flash_protect (FLAG_PROTECT_SET, CFG_MONITOR_BASE, - CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); #endif @@ -477,7 +477,7 @@ void flash_print_info (flash_info_t * in if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO) " : " "); + info->start[i], info->protect[i] ? " (RO)" : " "); #endif } putc ('\n');

2 1

[U-Boot-Users] [PATCH] Two System ACE CF fixes
by Peter Ryser 25 Jan '06

25 Jan '06

Attached a patch that adds support for the 16-bit wide bus of System ACE CF besides the existing support for the 8-bit wide bus. The patch also sets the FORCECFGMODE bit in the control register when the System ACE CF configuration controller is reset before reading a sector. Without this bit set System ACE CF reconfigures an FPGA if the CFGMODE pin is active whenever a sector is read. The third hunk fixes a typo. - Peter --- u-boot.orig/common/cmd_ace.c 2005-09-22 23:53:00.000000000 -0700 +++ u-boot/common/cmd_ace.c 2005-09-26 07:40:41.000000000 -0700 @@ -22,8 +22,9 @@ /* * The Xilinx SystemACE chip support is activated by defining * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE - * to set the base address of the device. This code currently - * assumes that the chip is connected via a byte-wide bus. + * to set the base address of the device. CFG_SYSTEMACE_WIDTH + * selects the bus width the chip is connected with. Valid + * settings are 8 or 16. * * The CONFIG_SYSTEMACE also adds to fat support the device class * "ace" that allows the user to execute "fatls ace 0" and the @@ -137,6 +138,11 @@ block_dev_desc_t * systemace_get_dev(in systemace_dev.removable = 1; systemace_dev.block_read = systemace_read; + if(CFG_SYSTEMACE_WIDTH == 8) + ace_writew(0, 0); + else + ace_writew(1, 0); + init_part(&systemace_dev); } @@ -227,7 +233,7 @@ static unsigned long systemace_read(int /* Reset the configruation controller */ val = ace_readw(0x18); - val|=0x0080; + val|=0x0088; ace_writew(val, 0x18); retry = trans * 16; @@ -249,7 +255,7 @@ static unsigned long systemace_read(int retry -= 1; } - /* Clear the configruation controller reset */ + /* Clear the configuration controller reset */ val = ace_readw(0x18); val&=~0x0080; ace_writew(val, 0x18); * Add System ACE CF support for 16-bit bus width Add fix to ignore CFGMODE pin when resetting the System ACE CF configuration controller to avoid reconfiguration of FPGAs when reading sectors. Patch by Peter Ryser, 26 Sep 2005

2 2

[U-Boot-Users] EP852 : Kernel not booting ( Hangs after uncompressing)
by gautam borad 20 Jan '06

20 Jan '06

Hi, I'm trying to port u-boot-1.1.3 to EP852 board with mpc852T processor.The kernel im using is linuxppc 2.4.21. The board is working fine with u-boot , the problem is that kernel is not starting. I've made sure that the bd_info structure is same in kernel and u-boot. The clocks_in_mhz variable is not set and the IMMR value in kernel and u-boot matches. I run the test_burst program in u-boot and it worked fine.( so no prob with RAM) What else am i doing wrong?? The dump is : U-Boot 1.1.3 (Oct 28 2005 - 12:54:07) EP852 CPU: MPC852TxxZPnn at 50 MHz [25.0...125.0 MHz] 4 kB I-Cache 4 kB D-Cache FEC present Board: EP852 (Rev. e4). CPLD Rev: 00 DIP Switch: 1111 DRAM: 16 MB Top of RAM usable for U-Boot at: 01000000 Reserving 354k for U-Boot at: 00fa7000 Reserving 128k for malloc() at: 00f87000 Reserving 60 Bytes for Board Info at: 00f86fc4 Reserving 56 Bytes for Global Data at: 00f86f8c Stack Pointer at: 00f86f68 New Stack Pointer is: 00f86f68 Now running in RAM - U-Boot at: 00fa7000 FLASH: Flash addr:ff800000 AMD_ID_LV320B selected. before print_size 8 MB In: serial Out: serial Err: serial U-Boot relocated to 00fa7000 Net: FEC ETHERNET ### main_loop entered: bootdelay=8 ### main_loop: bootcmd="<UNDEFINED>" => printenv bootargs bootargs=console=ttyS0,9600 root=/dev/ram => tftp 0x00200000 pImage Using FEC ETHERNET device TFTP from server 10.129.87.5; our IP address is 10.129.87.250 Filename 'pImage'. Load address: 0x200000 Loading: ################################################################# ########################################################### done Bytes transferred = 631143 (9a167 hex) => bootm 0x00200000 ## Booting image at 00200000 ... Image Name: Linux-2.4.21 Created: 2005-10-27 13:15:01 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 631079 Bytes = 616.3 kB Load Address: 00100000 Entry Point: 00100000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK before do_bootm_linux() argv = 16722772 addr = 16282928 ## Current stack ends at 0x00F86CA8 => set upper limit to 0x00800000 ## cmdline at 0x007FFF00 ... 0x007FFF20 No initrd ## Transferring control to Linux (at address 00100000) ... bi_memstart = 0 bi_memsize = 16777216 bi_flashstart = 4286578688 bi_flashsize = 8388608 bi_flashoffset = 343040 bi_sramstart = 0 bi_sramsize = 0 bi_immr_base = 4196401152 bi_bootflags = 1 bi_ip_addr = 176248826 bi_enetaddr[6] = bi_ethspeed = 114 bi_intfreq = 50000000 bi_busfreq = 50000000 bi_baudrate = 38400 // see the problem below The image was created with the following in arc/ppc/boot/Makefile : $(MKIMAGE) -A ppc -O linux -T kernel -C gzip -a 0x00100000 -e 0x00100000 \ -n 'Linux-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)' \ -d $< images/vmlinux.PPCBoot ln -sf vmlinux.PPCBoot images/pImage The same kernel was working fine before with the epbootloader. the partitions i made in kernel MTD are: ff80_0000 ------- ff82_0000 -> boot ff82_0000 ------- ff8c_0000 -> zImage ff8c_0000 ------- ff2c_0000 -> ramdisk ff2c_0000 ------- ffff_ffff -> UserFS (JFFS2) Some of the #defines in EP852 configs are : #define CFG_SDRAM_SIZE (16 * MB) #define CFG_FLASH_BASE 0xFF800000 #define CFG_FLASH_SIZE (8 * MB) #define CFG_BSCR_BASE 0xFA400000 #define CFG_IMMR 0xFA200000 #define CFG_JFFS2_FIRST_SECTOR 56 what should i give here? #define CFG_PRELIM_OR_AM 0xFF800000 #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) #define CFG_BR0_PRELIM 0xFF800001 #define CFG_OR1_PRELIM 0xFF000600 #define CFG_BR1_PRELIM ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V ) #define CFG_BR3_PRELIM 0xFA400001 /* BCSR */ #define CFG_OR3_PRELIM 0xFF7F8970 #define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ #define CFG_OR4_PRELIM 0xFFF80970 There is other minor(??) problem. When i set the value of CFG_SCCR to SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | SCCR_DFALCD00 u-boot works at CONFIG_BAUDRATE / 4 speed i.e if CONFIG_BAUDRATE = 9600 i've to set minicom/kermit to 2400 . Now when i set CFG_SCCR to 0x03020800 ( the value given by embedded planet config file) the baud rate works fine but the FEC doesnt work properly. It works __VERY__ slowly, i get errors in fec_recv() ( enabling ET_DEBUG) How do I make both ( FEC and baudrate ) work fine and also is this related to kernel not booting? Thanks in advance. ----------- We would change the world..... But GOD wont give the source code.

4 6

[U-Boot-Users] [PATCH]Fix cc-option macro in config.mk
by Paolo Broggini 21 Dec '05

21 Dec '05

The following patch fix the compilation problem discussed in thread "Problem building U-Boot for ARM target" Best regards -P.Broggini Signed-off-by: Paolo Broggini <pbroggini(a)softool.ch> CHANGELOG: Fix cc-option macro in config.mk, $(CFLAGS) dropped. Patch by Paolo Broggini, 12 Oct 2005 diff --git a/config.mk b/config.mk --- a/config.mk +++ b/config.mk @@ -90,7 +90,7 @@ HOSTSTRIP = strip # Option checker (courtesy linux kernel) to ensure # only supported compiler options are used # -cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ +cc-option = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null \ > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) #

3 3

[U-Boot-Users] 83xx TSEC
by David Updegraff 02 Dec '05

02 Dec '05

Hi. Anyone know of any registers to look at in the TSEC stuff that might tell a guy why a frame is not moving? Our PHY looks fine; 'mii dump' is fine, link up, etc. but in tsec_send() the buffer of a ping is loaded up, and simply never goes anywhere. ->tstat remains clear (no halt bit), but rtx.txbd[txIdx].status never changes from assigned value. Stats claim no frames; which is correct. I need some help in understanding why TSEC feels it cannot feed anything out the inerface. Thanx. -dbu.

2 2

[U-Boot-Users] MIPS LE build patch
by Matej Kupljen 17 Nov '05

17 Nov '05

Hi Wolfgang, You did not say anything about the new config.mk for the MIPS target which supports building BE and LE u-boot. This is the message: http://sourceforge.net/mailarchive/message.php?msg_id=12736269 What about the patch that can resolve problems with the binutils, so there is no need to patch the binutils. See: http://sourceforge.net/mailarchive/message.php?msg_id=10690757 BR, Matej

2 2

[U-Boot-Users] [PATCH] Command history and Command buffer editing
by J Mac 17 Nov '05

17 Nov '05

I made this patch using 'diff' on two source trees; I got the original copies of the files from the gitweb interface at source.denx.net. I used the 'diff -purN OLD NEW' command as described in README to generate the patch. All code changes are local to common/main.c Define CONFIG_COMMAND_HISTORY and/or CONFIG_COMMAND_EDIT to enable the behaviour(s). Please let me know if there is something I need to do to make the patch acceptable. * Patch by James MacAulay Sept 27, 2005 - Add a configuration option CONFIG_COMMAND_HISTORY to implement command history. Uses up and down arrow keys to scroll through history. Other options are described in README. - Add a configuration option CONFIG_COMMAND_EDIT to implement command buffer editing. Uses ^A, ^E, left and right arrow keys to move through command buffer. Other options are described in README.

2 2

[U-Boot-Users] NAND flash support
by Terence Soh 02 Nov '05

02 Nov '05

Hi, Correct me if I'm wrong but u-boot only support 512 byte page size nand flash components. Is there going to be any nand flash driver support for 2048 bytes (8-bit data bus) page size components? Thanks, Terence.

4 5

[U-Boot-Users] [PATCH] Add RealView Emulation BaseBoard support.
by Peter Pearse 31 Oct '05

31 Oct '05

The attached gzipped patch was made against the U-Boot GIT head of Oct 31 2005. It is my patch number 013. The patch is independent of patches 009 & 010, but dependent on patch 011 & 012 The patch adds support for the new RealView Emulation BaseBoard series of boards. CHANGELOG: Add RealView Emulation BaseBoard. Patch by Peter Pearse, 31st Oct 2005

1 0

[U-Boot-Users] [PATCH] Use Versatile base board facilities.
by Peter Pearse 31 Oct '05

31 Oct '05

The attached gzipped patch was made against the U-Boot GIT head of Oct 31 2005. It is my patch number 011. The patch is independent of patches 009 & 010. The patch updates the Versatile board code to use the base board facilities, rather than the 926EJ-S core, for timing & board reset. CHANGELOG: Use Versatile base board facilities. Patch by Peter Pearse, 31st Oct 2005

1 0

[U-Boot-Users] [PATCH] Document new Integrator/CP targets
by Peter Pearse 31 Oct '05

31 Oct '05

The attached gzipped patch was made against the U-Boot GIT head of Oct 31 2005. It is my patch number 010. The patch updates the README-integrator to document the target names, changed in my patch 009. CHANGELOG: Update README-integrator with new target names. Patch by Peter Pearse, 31st Oct 2005

1 0

[U-Boot-Users] has someone run u-boot in mipssim?
by zhuzhenhua 29 Oct '05

29 Oct '05

because our soc is not available now, i want to run u-boot in mipssim to verify my modification on cpu/start.S and board/xxx/lowlevel_init.S. but the u-boot compiled by eldk seems to run not correctly in mipssim.and if i modify the CROSS_COMPILE as sde-, it shows error as "can't find mips-linux-as". so i wonder is there someone has run u-boot in mipssim and with which toolchain?

2 3

[U-Boot-Users] re[18]
by Bart Dillon 28 Oct '05

28 Oct '05

Sensational revolution in medicine! Enlarge your penis up to 10 cm or up to 4 inches! It's herbal solution what hasn't side effect, but has 100% guaranteed results! Don't loose your chance and but know wihtout doubts, you will be impressed with results! Clisk here: http://hamptonsworkout.info

1 0

[U-Boot-Users] where to get the patch file mentioned in mail list
by zhuzhenhua 28 Oct '05

28 Oct '05

i search the mail list archive in u-boot sorceforge project, and i find some usefull patch, i wonder where to get these patch? thanks for hints

1 0

[U-Boot-Users] Help on mpc8260ads flash u-boot
by batsayan.das＠tcs.com 27 Oct '05

27 Oct '05

Hello, We have a working RAM version of U-Boot for MPC8260ADS type customs board. We load the "u-boot.serc" by the TRACE tool and when run from the trace tool it gives the U-Boot prompt. I am giving a snap of the CMM file which actually loads the u-boot.serc to the memory. Our HRCW is "80 52 72 45". As per my understanding this values are stored in the flash. The flash is adress starts from 0x0. **********Snap of CMM file************ sys.mode down sys.option base 0x0F000000 system.cpu mpc8260 ... data.set 0x0f0101A8 %l 0x0f000000 ;IMMR data.set 0x0f010000 %l 0x8524C000 ;SIUMCR data.set 0x0f010004 %l 0xFFFFFF01 ;0xffffff81 ;SYPCR data.set 0x0f010024 %l 0x00000000 ;BCR data.set 0x0f010104 %l 0xFFF00660 ;OR0(Boot flash) data.set 0x0f010100 %l 0x00001001 ;BR0 ;UPMA initialization ;read region ;write region ;SDRAM initilization data.load c:\u-boot.srec *****************Snap End************** My question is. What the places we need to look into to convert this RAM version of U-Boot to ROM/Flash version of U-boot. The objective is when power on the u-boot binaries stored into the flash/ROM should be executed and give us the boot prompt. I think I need to change the HRCW. and the job done by the above CMM file should be done by the u-boot binary, so some part of the RAM version u-boot need to be modified to do this. Is there any specific place in the u-boot tree where we need to make change which does the job of the CMM file? Any help in this regard will be helpful. Thanks, Batsayan Das Tata Consultancy Services Limited Mailto: batsayan.das(a)tcs.com Website: http://www.tcs.com Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

2 3

[U-Boot-Users] skyeye and u-boot
by Richard Plana 27 Oct '05

27 Oct '05

Hi, I'm trying to build u-boot-1.1.3 for use with skyeye-1.0.0 (an ARM simulator) and was hoping to get tips and help building it from people who've done it before or know how. I'm building my own toolchain using the buildchain script written by Chip Coldwell <http://frank.harvard.edu/~coldwell/toolchain/> (gcc-2.4.4, glibc-2.3.5, linux-2.6.10). Unfortunately, I end up with a gcc compiler with a libgcc.a that's compiled to use hardware FP. Could someone tell me how to rebuild gcc to avoid that problem with u-boot? Is there an elegant way of keeping two versions of gcc (one that uses hardware FP and one that uses software FP) for when I need to build code for the actual board? Thanks for any help. -- Richard Plana Zi Corporation

2 1

[U-Boot-Users] liuhuitian1997@gmail.com
by 刘会田 27 Oct '05

27 Oct '05

1 0

[U-Boot-Users] u-boot-1.1.3 build error
by Li Weichen 26 Oct '05

26 Oct '05

Hi all: I am trying to build u-boot-1.1.3 for TI OMAP 5912 OSK. My system is Debian amd64 Sarge 3.1. First I encounter errors with option `short-load-bytes'and 'apcs-32'. When I delete this option in cpu/arm926ejs/config.mk, I encountered the second error: undefined CFG_GBL_DATA_SIZE. I found it is not defined in include/configs/omap5912osk.h and other related .h files. I tried to append a line in omap5912osk.h then a new error appeared. net.c: In function 'NetStartAgain': net.c:579: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness net.c: In function 'NetCksum': net.c:1580: error: invalid lvalue in increment net.c: In function 'getenv_IPaddr': net.c:1742: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness net.c: In function 'getenv_VLAN': net.c:1747: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness make[1]: *** [net.o] Error 1 make: *** [net/libnet.a] Error 2 What should I do now? There is also a strange thing that if I built u-boot-1.1.3 with another PC ( Redhat FC3 ), the building process seems successful without any changes. Something wrong with configuration or else? Thank you for your advice and I am eager to receive your kind reply. Best regards! Li Weichen 2005-10-26

1 0

[U-Boot-Users] 1.1.3 build error
by Li Weichen 26 Oct '05

26 Oct '05

Hi all: I am trying to build u-boot-1.1.3 for TI OMAP 5912 OSK. My system is Debian amd64 Sarge 3.1. First I encounter errors with option `short-load-bytes'and 'apcs-32'. When I delete this option in cpu/arm926ejs/config.mk, I encountered the second error: undefined CFG_GBL_DATA_SIZE. I found it is not defined in include/configs/omap5912osk.h and other related .h files. I tried to append a line in omap5912osk.h then a new error appeared. net.c: In function 'NetStartAgain': net.c:579: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness net.c: In function 'NetCksum': net.c:1580: error: invalid lvalue in increment net.c: In function 'getenv_IPaddr': net.c:1742: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness net.c: In function 'getenv_VLAN': net.c:1747: warning: pointer targets in passing argument 1 of 'getenv' differ in signedness make[1]: *** [net.o] Error 1 make: *** [net/libnet.a] Error 2 What should I do now? There is also a strange thing that if I built u-boot-1.1.3 with another PC ( Redhat FC3 ), the building process seems successful without any changes. Something wrong with configuration or else? Thank you for your advice and I am eager to receive your kind reply. Best regards! Li Weichen 2005-10-26

1 0

[U-Boot-Users] [PATCH] support for mainstone development board
by Frank Agius 26 Oct '05

26 Oct '05

Attached are files to add support for the Mainstone development board (PXA270 CPU). This work was based on the Lubbock module. CHANGELOG: * Add support for the Mainstone development board Patch by Frank Agius, 26 Oct 2005 ________________________________________ Frank Agius SAMSys Technologies, Inc. Index: MAKEALL =================================================================== RCS file: /cvsroot/u-boot/u-boot/MAKEALL,v retrieving revision 1.128 diff -p -u -r1.128 MAKEALL --- MAKEALL 21 Oct 2005 20:39:10 -0000 1.128 +++ MAKEALL 26 Oct 2005 13:57:35 -0000 @@ -202,8 +202,8 @@ LIST_ARM11=" \ LIST_pxa=" \ adsvix cerf250 cradle csb226 \ - innokom lubbock pxa255_idp wepep250 \ - xaeniax xm250 xsengine \ + innokom lubbock mainstone pxa255_idp \ + wepep250 xaeniax xm250 xsengine \ " LIST_ixp="ixdp425" Index: Makefile =================================================================== RCS file: /cvsroot/u-boot/u-boot/Makefile,v retrieving revision 1.212 diff -p -u -r1.212 Makefile --- Makefile 15 Oct 2005 17:08:09 -0000 1.212 +++ Makefile 26 Oct 2005 13:57:36 -0000 @@ -1601,6 +1601,9 @@ lubbock_config : unconfig logodl_config : unconfig @./mkconfig $(@:_config=) arm pxa logodl +mainstone_config: unconfig + @./mkconfig $(@:_config=) arm pxa mainstone + pxa255_idp_config: unconfig @./mkconfig $(@:_config=) arm pxa pxa255_idp Index: README =================================================================== RCS file: /cvsroot/u-boot/u-boot/README,v retrieving revision 1.138 diff -p -u -r1.138 README --- README 12 Oct 2005 23:47:18 -0000 1.138 +++ README 26 Oct 2005 13:57:37 -0000 @@ -308,9 +308,9 @@ The following options need to be configu CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, - CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_VCMA9 + CONFIG_MAINSTONE, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, + CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------ Index: drivers/smc91111.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/smc91111.c,v retrieving revision 1.19 diff -p -u -r1.19 smc91111.c --- drivers/smc91111.c 22 Nov 2004 22:20:09 -0000 1.19 +++ drivers/smc91111.c 26 Oct 2005 13:57:40 -0000 @@ -495,7 +495,15 @@ static void smc_enable() SMC_SELECT_BANK( 0 ); /* see the header file for options in TCR/RCR DEFAULT*/ SMC_outw( TCR_DEFAULT, TCR_REG ); +#ifdef CONFIG_SMC_PXA270 + /* The promiscuous bit set because I could not receive ARP reply + * packets from the server when I send a ARP request. It only works + * when I set the promiscuous bit + */ + SMC_outw( RCR_DEFAULT | RCR_PRMS, RCR_REG ); +#else SMC_outw( RCR_DEFAULT, RCR_REG ); +#endif /* clear MII_DIS */ /* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */ @@ -529,7 +537,6 @@ static void smc_shutdown() SMC_outb( TCR_CLEAR, TCR_REG ); } - /* . Function: smc_hardware_send_packet(struct net_device * ) . Purpose: @@ -640,7 +647,7 @@ again: } /* we have a packet address, so tell the card to use it */ -#ifndef CONFIG_XAENIAX +#ifndef SMC_WRITE_32 SMC_outb (packet_no, PN_REG); #else /* On Xaeniax board, we can't use SMC_outb here because that way @@ -654,7 +661,11 @@ again: printf ("Write data fifo not empty!\n"); /* point to the beginning of the packet */ +#ifndef CONFIG_SMC_PXA270 SMC_outw (PTR_AUTOINC, PTR_REG); +#else + SMC_outl (PTR_AUTOINC <<16, PTR_REG-2); +#endif PRINTK3 ("%s: Trying to xmit packet of length %x\n", SMC_DEV_NAME, length); @@ -683,7 +694,7 @@ again: */ #ifdef USE_32_BIT SMC_outsl (SMC91111_DATA_REG, buf, length >> 2); -#ifndef CONFIG_XAENIAX +#ifndef SMC_WRITE_32 if (length & 0x2) SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG); @@ -708,7 +719,7 @@ again: SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */ -#ifndef CONFIG_XAENIAX +#ifndef CONFIG_SMC_WRITE_32 /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (0, SMC91111_DATA_REG); @@ -716,7 +727,6 @@ again: SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG); } #endif - /* and let the chipset deal with it */ SMC_outw (MC_ENQUEUE, MMU_CMD_REG); @@ -729,7 +739,7 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX +#ifdef SMC_WRITE_32 SMC_outw (MC_FREEPKT, MMU_CMD_REG); #endif @@ -743,6 +753,24 @@ again: return 0; } else { +#ifdef USE_32_BIT + /* ack. int */ + status = SMC_inb (SMC91111_INT_REG); + if (status & IM_TX_INT ) + { + SMC_outb (IM_TX_INT, SMC91111_INT_REG); + } + status = SMC_inb (SMC91111_INT_REG); + if (status & IM_TX_EMPTY_INT ) + SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); + PRINTK2 ("%s: Sent packet of length %d, int status=0x%08x \n", SMC_DEV_NAME, length, status); + + /* release packet */ + /* auto release now set, no need to release the tx packet + * manually + SMC_outb (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); + */ +#else /* ack. int */ SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */ @@ -751,10 +779,10 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX +#ifdef SMC_WRITE_32 SMC_outw (MC_FREEPKT, MMU_CMD_REG); #endif - +#endif /* wait for MMU getting ready (low) */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { udelay (10); @@ -766,7 +794,7 @@ again: } /* restore previously saved registers */ -#ifndef CONFIG_XAENIAX +#ifndef SMC_WRITE_32 SMC_outb( saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way @@ -805,7 +833,13 @@ void smc_destructor() */ static int smc_open (bd_t * bd) { - int i, err; + int err; +#ifdef CONFIG_SMC_PXA270 + long addr0_3; + word addr4_5; +#else + int i; +#endif PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME); @@ -828,6 +862,18 @@ static int smc_open (bd_t * bd) memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ return (-1); /* upper code ignores this, but NOT bi_enetaddr */ } +#ifdef CONFIG_SMC_PXA270 + /* writes must be on a 32 bit boundary. write first 4 bytes of mac addr, + * then the last 2 bytes. + */ + addr0_3 = smc_mac_addr[3]<<24 | smc_mac_addr[2]<<16 | smc_mac_addr[1] <<8 | smc_mac_addr[0]; + /* write first 4 bytes. write address should be on a 32 bit boundary */ + SMC_outl (addr0_3, ADDR0_REG); + addr4_5 = smc_mac_addr[5]<<8 | smc_mac_addr[4]; + PRINTK2("writing smc_mac_addr=0x%06x%x\n",addr0_3,addr4_5); + /* write last 2 bytes. write address should be on a 32 bit boundary */ + SMC_outw (addr4_5, ADDR0_REG+4); +#else #ifdef USE_32_BIT for (i = 0; i < 6; i += 2) { word address; @@ -840,7 +886,7 @@ static int smc_open (bd_t * bd) for (i = 0; i < 6; i++) SMC_outb (smc_mac_addr[i], (ADDR0_REG + i)); #endif - +#endif /* end CONFIG_SMC_PXA270 */ return 0; } @@ -882,7 +928,12 @@ static int smc_rcv() PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME); /* start reading from the start of the packet */ +#ifndef CONFIG_SMC_PXA270 SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG ); +#else + SMC_outl ((PTR_READ | PTR_RCV | + PTR_AUTOINC)<<16, 4); +#endif /* First two words are status and packet_length */ #ifdef USE_32_BIT @@ -952,7 +1003,7 @@ static int smc_rcv() udelay(1); /* Wait until not busy */ /* restore saved registers */ -#ifndef CONFIG_XAENIAX +#ifndef SMC_WRITE_32 SMC_outb( saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way @@ -1381,7 +1432,11 @@ static void smc_phy_configure () /* Configure the Receive/Phy Control register */ SMC_SELECT_BANK (0); +#ifdef CONFIG_SMC_PXA270 + SMC_outl (RPC_DEFAULT<<16, RPC_REG-2); +#else SMC_outw (RPC_DEFAULT, RPC_REG); +#endif /* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */ my_phy_caps = smc_read_phy_register (PHY_STAT_REG); @@ -1459,7 +1514,11 @@ static void smc_phy_configure () } /* Re-Configure the Receive/Phy Control register */ +#ifdef CONFIG_SMC_PXA270 + SMC_outl (RPC_DEFAULT<<16, RPC_REG-2); +#else SMC_outw (RPC_DEFAULT, RPC_REG); +#endif smc_phy_configure_exit: ; Index: drivers/smc91111.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/smc91111.h,v retrieving revision 1.11 diff -p -u -r1.11 smc91111.h --- drivers/smc91111.h 2 Nov 2004 13:00:56 -0000 1.11 +++ drivers/smc91111.h 26 Oct 2005 13:57:41 -0000 @@ -74,7 +74,12 @@ typedef unsigned long int dword; #define SMC_IO_EXTENT 16 -#ifdef CONFIG_PXA250 +/* XANEIAX and other boards can only do 32-bit writes */ +#if defined (CONFIG_XAENIX) || defined (CONFIG_SMC_PXA270) +#define SMC_WRITE_32 +#endif + +#if defined (CONFIG_PXA250) || defined (CONFIG_PXA27X) #ifdef CONFIG_XSENGINE #define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) @@ -176,7 +181,7 @@ typedef unsigned long int dword; }; \ }) -#else /* if not CONFIG_PXA250 */ +#else /* if not (CONFIG_PXA250 || CONFIG_PXA27X) */ #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */ /* @@ -678,8 +683,11 @@ enum { --------------------------------------------------------------------------*/ /* select a register bank, 0 to 3 */ - +#ifdef CONFIG_SMC_PXA270 +#define SMC_SELECT_BANK(x) { SMC_outl( (x)<<16, 12 ); } +#else #define SMC_SELECT_BANK(x) { SMC_outw( x, BANK_SELECT ); } +#endif /* this enables an interrupt in the interrupt mask register */ #define SMC_ENABLE_INT(x) {\

1 0

[U-Boot-Users] help on u-boot
by prabha.j＠tcs.com 26 Oct '05

26 Oct '05

Hi all, I was able to build u-boot for my custom board. when i tried to load it nothing is coming. I am using TRACE32 ICE and the board is almost similar to MPC8260ADS. I had set the baudrate as 115200 and flowcontrol as none. when i give run command in TRACE32, nothing is coming in hyperterminal. My flash base is 0x0000 0000 so i had given this in the board/mpc8260ads/config.mk . I have done some changes in the include/configs/MPC8260ADS.h for my board. Any help is appreciated. Thanks in advance. Prabha J. Tata Consultancy Services Limited Mailto: prabha.j(a)tcs.com Website: http://www.tcs.com Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

3 4

RE: [U-Boot-Users] Running test code from RAM while having GOT po inting to flash
by atul.sabharwal＠exgate.tek.com 25 Oct '05

25 Oct '05

Other possibility is the linker script. There is no method I can think of to know if this is correct (basically compare system.map vs u-boot.lds). It was derived from the mbx8xx board's u-boot.lds. If you could double check it? I have a beta version of MontaVista toolchain which was compiled for PPC860. Otheriwse, it should work with 852T. Thanks, Atul OUTPUT_ARCH(powerpc) SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); /* Do we need any of these for elf? __DYNAMIC = 0; */ SECTIONS { /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } .hash : { *(.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } .rela.data : { *(.rela.data) } .rel.rodata : { *(.rel.rodata) } .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } .rela.ctors : { *(.rela.ctors) } .rel.dtors : { *(.rel.dtors) } .rela.dtors : { *(.rela.dtors) } .rel.bss : { *(.rel.bss) } .rela.bss : { *(.rela.bss) } .rel.plt : { *(.rel.plt) } .rela.plt : { *(.rela.plt) } .init : { *(.init) } .plt : { *(.plt) } .text : { /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/mpc8xx/start.o (.text) cpu/mpc8xx/traps.o (.text) common/dlmalloc.o (.text) lib_ppc/ppcstring.o (.text) lib_generic/vsprintf.o (.text) lib_generic/crc32.o (.text) lib_generic/zlib.o (.text) lib_ppc/cache.o (.text) lib_ppc/time.o (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o (.ppcenv) *(.text) *(.fixup) *(.got1) } _etext = .; PROVIDE (etext = .); .rodata : { *(.rodata) *(.rodata1) *(.rodata.str1.4) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } /* Read-write section, merged into data segment: */ . = (. + 0x00FF) & 0xFFFFFF00; _erotext = .; PROVIDE (erotext = .); .reloc : { *(.got) _GOT2_TABLE_ = .; *(.got2) _FIXUP_TABLE_ = .; *(.fixup) } __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : { *(.data) *(.data1) *(.sdata) *(.sdata2) *(.dynamic) CONSTRUCTORS } _edata = .; PROVIDE (edata = .); __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; . = ALIGN(256); __init_begin = .; .text.init : { *(.text.init) } .data.init : { *(.data.init) } . = ALIGN(256); __init_end = .; __bss_start = .; .bss : { *(.sbss) *(.scommon) *(.dynbss) *(.bss) *(COMMON) } _end = . ; PROVIDE (end = .); }

2 1

RE: [U-Boot-Users] Running test code from RAM while having GOT po inting to flash
by atul.sabharwal＠exgate.tek.com 25 Oct '05

25 Oct '05

But as I said, I have disabled the I-cache & D-cache & CFG_CACHE. On reset, in start.S, you set IDC_DISABLE@h to spr DC_CST & IC_CST. So, I don't know if a cache flush can magically turn the cache ON!! -- Atul

1 0

RE: [U-Boot-Users] Running test code from RAM while having GOT po inting to flash
by atul.sabharwal＠exgate.tek.com 25 Oct '05

25 Oct '05

The hardware engineer is initializing the DDR memory correctly. Otherwise we won't be able to read/write to the memory. As I understand, the GOT table is used for relocating the exception vectors. I am most likely crashing while copying the fixups or when doing a cache flush. In start.S, if I disable the ICACHE & do not run the cache POST test which Enables the I-cache and never disables it, I should be fine. Unless its some 852T processor cache bug. We had problem with ICTRL with value of 7. Value of 3 seems to work better. Processor is at 50MHz and memory is at 100MHz with TA line based handshake ( so atomic). -- Atul

2 1