January 2005 - U-Boot

[U-Boot-Users] Patch: allow a fixed port for TFTP (take 3)
by Jerry Van Baren 24 Sep '05

24 Sep '05

Hi Wolfgang, try three on the patch attached. The change here is to rename the env variable per Tolunay Orkun's recommendation. * Patch by Jerry Van Baren 11 January 2005 - Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpsourceport to force TFTP to use a fixed UDP port. gvb Index: README =================================================================== RCS file: /cvsroot/u-boot/u-boot/README,v retrieving revision 1.117 diff -p -u -r1.117 README --- README 9 Jan 2005 23:16:42 -0000 1.117 +++ README 10 Jan 2005 04:13:50 -0000 @@ -1480,6 +1480,22 @@ The following options need to be configu When SystemACE support is added, the "ace" device type becomes available to the fat commands, i.e. fatls. +- TFTP Fixed UDP Port: + CONFIG_TFTP_PORT + + If this is defined, the environment variable tftpsourceport + is used to supply the TFTP UDP source port value. + If tftpsourceport isn't defined, the normal pseudo-random port + number generator is used. + + The purpose for this is to allow a TFTP server to + blindly start the TFTP transfer using the pre-configured + target IP address and UDP port. This has the effect of + "punching through" the (Windows XP) firewall, allowing + the remainder of the TFTP transfer to proceed normally. + A better solution is to properly configure the firewall, + but sometimes that is not allowed. + - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -2432,6 +2448,9 @@ Some configuration options can be set us Useful on scripts which control the retry operation themselves. + tftpsourceport - If this is set, the value is used for TFTP's + UDP source port. + vlan - When set to a value < 4095 the traffic over ethernet is encapsulated/received over 802.1q VLAN tagged frames. Index: net/tftp.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/net/tftp.c,v retrieving revision 1.9 diff -p -u -r1.9 tftp.c --- net/tftp.c 15 Apr 2004 21:48:55 -0000 1.9 +++ net/tftp.c 10 Jan 2005 04:13:51 -0000 @@ -301,6 +301,10 @@ TftpTimeout (void) void TftpStart (void) { +#ifdef CONFIG_TFTP_PORT + char *ep; /* Environment pointer */ +#endif + if (BootFile[0] == '\0') { IPaddr_t OurIP = ntohl(NetOurIP); @@ -354,7 +358,13 @@ TftpStart (void) TftpServerPort = WELL_KNOWN_PORT; TftpTimeoutCount = 0; TftpState = STATE_RRQ; + /* Use a pseudo-random port unless a specific port is set */ TftpOurPort = 1024 + (get_timer(0) % 3072); +#ifdef CONFIG_TFTP_PORT + if ((ep = getenv("tftpsourceport")) != NULL) { + TftpOurPort= simple_strtol(ep, NULL, 10); + } +#endif TftpBlock = 0; /* zero out server ether in case the server ip has changed */

3 10

[U-Boot-Users] Patch: allow a fixed port for TFTP
by Jerry Van Baren 24 Sep '05

24 Sep '05

Hi Wolfgang, try two on the patch attached. * Patch by Jerry Van Baren 10 January 2005 - Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport to force TFTP to use a fixed UDP port. gvb Index: README =================================================================== RCS file: /cvsroot/u-boot/u-boot/README,v retrieving revision 1.117 diff -p -u -r1.117 README --- README 9 Jan 2005 23:16:42 -0000 1.117 +++ README 10 Jan 2005 04:13:50 -0000 @@ -1480,6 +1480,22 @@ The following options need to be configu When SystemACE support is added, the "ace" device type becomes available to the fat commands, i.e. fatls. +- TFTP Fixed UDP Port: + CONFIG_TFTP_PORT + + If this is defined, the environment variable tftpport + is used to supply the TFTP UDP source port value. + If tftpport isn't defined, the normal pseudo-random port + number generator is used. + + The purpose for this is to allow a TFTP server to + blindly start the TFTP transfer using the pre-configured + target IP address and UDP port. This has the effect of + "punching through" the (Windows XP) firewall, allowing + the remainder of the TFTP transfer to proceed normally. + A better solution is to properly configure the firewall, + but sometimes that is not allowed. + - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -2432,6 +2448,9 @@ Some configuration options can be set us Useful on scripts which control the retry operation themselves. + tftpport - If this is set, the value is used for TFTP's + UDP source port. + vlan - When set to a value < 4095 the traffic over ethernet is encapsulated/received over 802.1q VLAN tagged frames. Index: net/tftp.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/net/tftp.c,v retrieving revision 1.9 diff -p -u -r1.9 tftp.c --- net/tftp.c 15 Apr 2004 21:48:55 -0000 1.9 +++ net/tftp.c 10 Jan 2005 04:13:51 -0000 @@ -301,6 +301,10 @@ TftpTimeout (void) void TftpStart (void) { +#ifdef CONFIG_TFTP_PORT + char *ep; /* Environment pointer */ +#endif + if (BootFile[0] == '\0') { IPaddr_t OurIP = ntohl(NetOurIP); @@ -354,7 +358,13 @@ TftpStart (void) TftpServerPort = WELL_KNOWN_PORT; TftpTimeoutCount = 0; TftpState = STATE_RRQ; + /* Use a pseudo-random port unless a specific port is set */ TftpOurPort = 1024 + (get_timer(0) % 3072); +#ifdef CONFIG_TFTP_PORT + if ((ep = getenv("tftpport")) != NULL) { + TftpOurPort= simple_strtol(ep, NULL, 10); + } +#endif TftpBlock = 0; /* zero out server ether in case the server ip has changed */

3 4

[U-Boot-Users] dbau1550 patch
by Andrew Dyer 24 Sep '05

24 Sep '05

A while back (Sep 23, 2004) someone named Leif posted a note about a patch to add support for the AMD DbAU1550 board to u-boot here https://sourceforge.net/mailarchive/forum.php?thread_id=5624545&forum_id=12… I can't seem to find the patch he referred to and I would like to get a hold of it. -- Hardware, n.: The parts of a computer system that can be kicked.

4 6

[U-Boot-Users] common/cmd_mii.c bug and patch
by Andrew Dyer 24 Sep '05

24 Sep '05

The mii info command (the !CONFIG_TERSE_MII version) has a bug in current cvs. If the phy address is passed to the command the code assigns the variable addr to start, instead of the values of addrlo which is extracted from the command line. At that point in the code addr is always 0. to demonstrate find a board with a phy at a non-zero address, compare the results of 'mii info' and mii info 1' (substitute the phy address on the test board for 1). Also in this file on lines 55 and 418 there are two places where a call to mii_init() is conditionally compiled in, but one condition includes defined(CONFIG_MCF52x2) and the other doesn't. Is this intentional? -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] [PATCH] support for CF/IDE on PCMCIA for PXA25X
by Christian Pell 13 Aug '05

13 Aug '05

Hi, I tried this with some different CFs with FAT file-systems on them. There is a README in the patch itself that goes in documentation directory. Bye, -- Christian Pellegrin <chri(a)ascensit.com>, <c.pellegrin(a)eurotech.it>, <chri(a)infis.univ.ts.it>, <c.pellegrin(a)exadron.com>

4 8

[U-Boot-Users] Patches for ARM IntegratorCP, ARM926EJS, and ARM946ES
by Shawn Jin 12 Aug '05

12 Aug '05

Hi, The patches were developed on an ARM IntegratorCP board with ARM946ES. Since the majority code of ARM946ES cpu was copied from ARM926EJS and there was bug about CFG_HZ found in ARM946ES later, I also fixed this CFG_HZ error on ARM926EJS. The major changes are 1. Mulitple core modules support (u-boot.multicm.patch) Following OMAP boards' methodology, I added mulitple core module configuration. For example, integratorcp_946es_config is for IntegratorCP board with ARM946ES, integratorcp_config is for IntegratorCP board with ARM926EJS by default, integratorap_946es_config is for IntegratorAP board with ARM946ES, and integratorap_config is for IntegratorAP with ARM926EJS. Now only two core modules are supported, ARM946ES and ARM926EJS. 2. ARM946ES support (u-boot.arm946es.patch) 3. ARM926EJS bug fix (u-boot.arm926ejs.patch) Fixed CFG_HZ problem. Set CFG_HZ to 1000. The solution is from AT91RM9200. 4. IntegratorCP bug fixes (u-boot.integratorcp.patch) Added SDRAM size information and FLASH support. Philippe, I don't have an ARM926EJS core module. Would you please test the CFG_HZ fix on your system? Thanks. Regards, -Shawn.

3 6

[U-Boot-Users] Switch between PlanetCore and U-Boot freely
by Sam Song 08 Aug '05

08 Aug '05

Hi all, Well, somebody was trying to pull the cat out of my bag. Here it is:-) ------------------------------------------------- After several heart-struck failure, I got one workable way to program each other in FLASH between PlanetCore and U-Boot. Hardware Platform : RPXlite DW(EP 823 H1 DW) 1. From U-Boot to PlanetCore Utilities : PlanetCore Boot Loader - PCL200.mot [root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot PCL200.mot pcl200.bin [Target Operation] u-boot>t 100000 pcl200.bin u-boot>go 0x100000 ## Starting application at 0x00100000 ... MPC8xx PlanetCore Flash Burner v2.00 Copyright 2001 Embedded Planet. All rights reserved. Construct Flash Device.....done. Program MPC8xx PlanetCore Boot Loader v2.00 Built Sep 19, 2001 at 14:34:42 Image located from FC000000 to FC01B5D1. (Skipping an image, only loading low boot image) Low boot board detected, skipping high boot image. Erasing, programming and verifying will start in 20 seconds Press P to start immediately or ESC to cancel Press Space or Enter for more options. .............. Erasing Programming FLASH programmed successfully! Press R to induce a hard reset MPC8xx PlanetCore Boot Loader v2.00 Copyright 2001 Embedded Planet. All rights reserved. DRAM available size = 64 MB wvCV DRAM OK > 2. From PlanetCore to U-Boot Utilities : PlanetCore FLASH Burner - PCB200.mot Use Flash Burner to finish the work: First, TFTP the U-Boot image file to RAM; For example, RPXlite_DW.bin to 0x400000 Second, TFTP FLASH Burner to RAM; For example, 0x100000 Third, run the FLASH Burner and Program the U-Boot image into the correct location in FLASH. [Target Operation] MPC8xx PlanetCore Boot Loader v2.00 Copyright 2001 Embedded Planet. All rights reserved. DRAM available size = 64 MB wvCV DRAM OK >t Load using tftp via Ethernet Enter server IP address <172.16.115.6> : Enter server filename <PCL200.mot> : RPXlite_DW.bin Enter (B)inary or (S)record input mode <S> : B Enter address offset : <00400000 hex> : Total bytes = 120096 in 232184 uSecs Loaded addresses 00400000 through 0041D51F. Start address = 00400000 >t Load using tftp via Ethernet Enter server IP address <172.16.115.6> : Enter server filename <RPXlite_DW.bin> : PCB200.mot Enter (B)inary or (S)record input mode <B> : S Enter address offset : <00000000 hex> : .512.1024..2048....4096..... Total bytes = 326280 in 2570249 uSecs Loaded addresses 00100000 through 0011BB51. Start address = 00100000 >go [Go 00100000] MPC8xx PlanetCore Flash Burner v2.00 Copyright 2001 Embedded Planet. All rights reserved. Construct Flash Device.....done. Bad start address Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length = 0xFFFFFFFF Forcing Menu Interface h[elp] Show commands. c[ode] Show information on code to be loaded. di[splay] Display all flash sections. du[mp] Dump memory. d ? for more info. e[rase] Erase flash sections. f[ill] Fill flash sections. im[age] Toggle load high, low, or both flash images. in[fo] Show flash information. ma[p] Show memory map. mo[dify] Modify memory. m ? for more info. p[rogram] Erase, program, and verify now. reset Restart the loader. s[how] Show flash sections to erase and program. t[est] Test flash sections. q[uit] Quit without programming. #program 400000 ff000000 1D51F doProgram( 400000 ff000000 1D51F ) Start = 0x00400000, target = 0xFF000000, length = 0x0001D51F Erasing sector 0xFF000000, length 0x008000. Erasing sector 0xFF008000, length 0x008000. Erasing sector 0xFF010000, length 0x008000. Erasing sector 0xFF018000, length 0x008000. Programming FF000000 through FF01D51E FLASH programmed successfully! Press R to induce a hard reset Forcing Hard Reset by MachineCheck and ResetOnCheckstop... U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache Board: RPXlite_DW DRAM: 64 MB FLASH: 16 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: SCC ETHERNET u-boot> ------------------------------------------------- Well, sometimes network function of PlanetCore couldn't work when switching from U-Boot to PlanetCore. For example, you couldn't download a file from HOST PC via TFTP. Don't worry, just restart your HOST PC and everything would work as smooth as clockwork. I don't know the reason WHY:-) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Merry Christmas and Happy New Year! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ===== Best regards, Sam _________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_…

2 3

[U-Boot-Users] [patch]fixes for cmd_fpga.c
by Andrew Dyer 08 Aug '05

08 Aug '05

The attached patch: 1) fixes a bug with the 'fpga loadb' command The bug is in calculating the config data size - 4 bytes of length info were being read as signed chars, casted to long, shifted and added. The cast to long was doing sign extension and causing an incorrect result if a byte was greater than 0x80. For me this caused the fpga load to end early and time out waiting for the hardware completion. 2) removes compilation warnings about using __FUNCTION__ concatenated with strings 3) changes the fpga loadb to always print the file header info during a load. I realize this patch is a mishmash - hopefully it's helpful to someone. -- Hardware, n.: The parts of a computer system that can be kicked.

2 1

[U-Boot-Users] [PATCH] Fix SystemACE CF access errors
by Jeff Angielski 07 Aug '05

07 Aug '05

Attached is a patch that fixes the configuration controller errors that sometimes occur when accessing the SystemACE CF. The patch also fixes the locking routines so that they do not stomp on the other bits in the controller register. Finally, the patch will auto detect the partition type to prevent "Partition x not valid on device y" error messages. CHANGELONG: * Patch by Jeff Angielski 09 Jan 2005 Fix errors that occur when accessing SystemACE CF.

2 1

[U-Boot-Users] [PATCH] fix PowerQUICC II masks detection
by Eugene Surovegin 06 Aug '05

06 Aug '05

Hi! This trivial patch fixes typos in cpu/mpc8260/cpu.c:checkcpu(). * Patch by Eugene Surovegin, 20 Dec 2004: Fix PowerQUICC II mask detection.

2 1