June 2004 - U-Boot

[U-Boot-Users] [PATCH] support for CF/IDE on PCMCIA for PXA25X
by Christian Pell 13 Aug '05

13 Aug '05

Hi, I tried this with some different CFs with FAT file-systems on them. There is a README in the patch itself that goes in documentation directory. Bye, -- Christian Pellegrin <chri(a)ascensit.com>, <c.pellegrin(a)eurotech.it>, <chri(a)infis.univ.ts.it>, <c.pellegrin(a)exadron.com>

4 8

[U-Boot-Users] mkimage for DOS
by Dave Westwood 10 Jun '05

10 Jun '05

long shot really, but does anyone have a working executable mkimage for DOS or a dos window in windows (don't flame me for using windows !!)

2 1

Re: [U-Boot-Users] Support for Samsung 1Giga bit NAND device
by Laurent Mohin 01 Jun '05

01 Jun '05

Andy, U-boot 1.1.0 doesn't provide support for NAND flash with a page size of 2K-byte instead of 512 byte (and you're right, theses devices require special handling). Pantelis Antoniou submitted a patch on 2004-04-30 which seems to manage these new chips, but I don't think it has been added to the latest CVS tree. By the way, Samsung also offer 1 Giga bit devices with a 512 byte page size (K9K1G08UOM - Manufacturer ID : 0xEC, Chip ID: 0x79). Hope this helps, Laurent Andy Hawkins <a.hawkins(a)cabletime.com> Sent by: u-boot-users-admin(a)lists.sourceforge.net 14/06/04 13:40 To: u-boot-users(a)lists.sourceforge.net cc: Subject: [U-Boot-Users] Support for Samsung 1Giga bit NAND device Hi, Can anyone tell me if U-Boot has support for the Samsung 1 Giga Bit NAND devices (Manufacturer ID: 0xec, Chip ID: 0xf1)? I understand these devices have an unusually large block size, that needs special handling. Is this correct? Thanks. Andy ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

4 8

[U-Boot-Users] Environment in flash rather than EEProm
by Andy Hawkins 11 Feb '05

11 Feb '05

Hi all I'm using a PPChameleonEVB, and am trying to move the u-boot environment into flash. I've modified the include/configs/PPChameleon.h file as follows: #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR 0xFFFFA000 #define CFG_ENV_OFFSET (CFG_ENV_ADDR - 0xFFFC0000) #define CFG_ENV_SIZE 0x2000 I've added some debugging into the section where it reads the environment, and I'm seeing the following: U-Boot 1.0.2-adh-2004/03/29 (Mar 30 2004 - 13:40:38) CPU: IBM PowerPC 405EP Rev. B at 133.333 MHz (PLB=133, OPB=66, EBC=33 MHz) IIC Boot EEPROM disabled PCI async ext clock used, internal PCI arbiter enabled 16 kB I-Cache 16 kB D-Cache Board: ### No HW ID - assuming PPChameleonEVB I2C: ready DRAM: 32 MB Top of RAM usable for U-Boot at: 02000000 Reserving 189k for U-Boot at: 01fd0000 Reserving 256k for malloc() at: 01f90000 Reserving 128 Bytes for Board Info at: 01f8ff80 Reserving 48 Bytes for Global Data at: 01f8ff50 Stack Pointer at: 01f8ff38 New Stack Pointer is: 01f8ff38 Now running in RAM - U-Boot at: 01fd0000 FLASH: 4 MB env_relocate[204] offset = 0x2010000 env_relocate[216] embedded ENV (before reloc) at fffd9474 env_relocate[218] embedded ENV (after reloc) at 01fe9474 U-Boot relocated to 01fd0000 NAND:Probing at 0xff000000 32 MB ### main_loop entered: bootdelay=5 ### main_loop: bootcmd="<UNDEFINED>" => As you can see, the address of the environment before relocation is 0xfffd9474. Shouldn't this be 0xFFFFA000? Is there anything else I need to do to force the location of the environment into the required place? It looks like the address of the environment is based on the location of the 'environment' variable in common/environment.c. Do I need to change the LD script to force this variable to a certain location? If so, can anyone help with what I need to do (I'm not familiar with LD scripts yet). Many thanks. Andy

3 7

[U-Boot-Users] Ping issue
by Vidya S 07 Dec '04

07 Dec '04

Hi, I am using smc91111.c driver of u-boot. all my network functionalities are working well. i am able to ping an other ip address and i get a message that the host is alive or not. Only problem is, when someone pings the target ip (my network card ip), it says destination not reachable. Is this really a problem? if so, pls help me solving it. regards vidya

5 8

[U-Boot-Users] Generating b-records for DragonBall i.MX
by Steven Scholz 10 Oct '04

10 Oct '04

Hi there, I just hacked a simple script that converts u-boot.bin into a text file containg processor init code, SynchFlash programming code and U-Boot data in form of so called b-records. This can be used to programm U-Boot into (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L 0AFE1F3410202E2E2E000000002073756363656564/ 0AFE1F44102E0A0000206661696C656420210A0000/ 0AFE100000 ... MX1ADS Sync-flash Programming Utility v0.5 2002/08/21 Source address (stored in 0x0AFE0000): 0x0A000000 Target address (stored in 0x0AFE0004): 0x0C000000 Size (stored in 0x0AFE0008): 0x0001A320 Press any key to start programming ... Erasing ... Blank checking ... Programming ... Verifying flash ... succeed. Programming finished. So no need for a BDI2000 anymore... ;-) This is working on my MX1ADS eval board. Hope this could be useful for someone. (Maybe we even want to include this into the tools directory.) Steven

3 2

[U-Boot-Users] [PATCH] Generic Support for Motorola i.MX architecture
by Robert Schwebel 03 Aug '04

03 Aug '04

On Sun, Jun 27, 2004 at 08:18:31PM +0200, Robert Schwebel wrote: > I'll post our patch in five minutes... Well, six minutes ;) I've temporarily put the patch here: http://www.pengutronix.de/software/u-boot/u-boot-imx1.diff Sidenote: it is difficult to audit this patch for trailing whitespace as the patch context contains that much of it that you don't see the needle in the haystack =8-) Changelog entry: * Patch by Sascha Hauer, 27 Jun 2004: Split mx1ads stuff into generic imx and platform parts Add support for Synertronixx scb9328, Viasys FlowScreen 2 Wolfgang, do you prefer the code being split into separate pieces for the single tasks? Robert -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hornemannstraße 12, 31137 Hildesheim, Germany Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4

4 9

[U-Boot-Users] Binary file cat
by Adam Bezanson 03 Aug '04

03 Aug '04

Hi, I have ported u-boot to my arm920t based system. I have a unique situation in that my processor requires a binary header to be placed In front of u-boot.bin before it is burnt into flash. If the processor doesn't find this header in flash it will not boot out of flash. Currently I have the header file as a separate file in the root directory and when I finish a new compile I have a shell script which Simply does a 'cat header.bin u-boot.bin > out.bin'. I'd like to get away from this and add it to the Makefiles so for my board I don't have to run this script every time. Before I go editing a top-level Makefile, I wanted to ask for advice on how I should go About doing this? Anything I can do in my board-specific directory would make me feel better. Suggestions? Thanks, Adam

3 6

[U-Boot-Users] [PATCH] for Xilinx's ml300 board
by Sean Chang 13 Jul '04

13 Jul '04

Hi Wolfgang, This is the first time I am submitting a patch, so if there is any problem please let me know and I'll be more than happy to fix it. This patch is applied against the u-boot 1.1.1 release. Basically it adds support for the ml300 board to read out its environment information stored on the EEPROM. Any comments are welcomed. Thanks, Sean ================================== CHANGELOG: Patch by Sean Chang, 28 Jun 2004: Add support for ml300 board to read out its environment information stored on the EEPROM.

6 7

[U-Boot-Users] [patch] master read fix mpc8245
by Marc Leeman 13 Jul '04

13 Jul '04

Reading PPC Memory from another device with the PPC as PCI target device corrupts data due to interenal hardware buffering. Fix to disable these buffers with no performance influence. a detailed description is available upon request (pdf, mailinglist bounces).

3 2

[U-Boot-Users] Add support for TQM5200 board
by Martin Krause 11 Jul '04

11 Jul '04

Hello all, this patch adds support for the TQM5200 module family (with a MPC5200 CPU). * Patch by Martin Krause, 30 June 2004: Add support for TQM5200 board Best regards, Martin Krause ------------------------------------------------------------------ Martin Krause TQ-Systems GmbH Gut Delling, Mühlstr. 2, 82229 Seefeld, Germany Email: martin.krause(a)tqs.de http://www.tq-group.com <<tqm5200.tar.gz>> <<patch_u-boot_tqm5200_2004-06-29_all_mkr>>

2 1

[U-Boot-Users] New command loopw
by Martin Krause 11 Jul '04

11 Jul '04

Hello all, here is a patch, which adds a new memory command 'loopw'. In difference to the existing 'loop' command, which implements a read loop, 'loopw' writes to memory in an infinite loop. We use this command to do hardware qualifications on our boards like memory timing measurements with a scope or a logic analysator. To not increase the memory footprint of the default U-Boot configuration, 'loopw' is only compiled in if CONFIG_LOOPW is defined. * Patch by Martin Krause, 29 June 2004: Add new memory command: loopw - infinite write loop on address range Best regards, Martin Krause ------------------------------------------------------------------ Martin Krause TQ-Systems GmbH Gut Delling, Mühlstr. 2, 82229 Seefeld, Germany Email: martin.krause(a)tqs.de http://www.tq-group.com <<patch_u-boot_loopw_command>>

2 1

[U-Boot-Users] [patch] add gd initialization
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this is a patch to initialize global data pointer/register to kill MAKEALL warnings. regards, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add gd initialization Index: u-boot/lib_microblaze/board.c =================================================================== --- u-boot.orig/lib_microblaze/board.c +++ u-boot/lib_microblaze/board.c @@ -72,8 +72,21 @@ init_fnc_t *init_sequence[] = { void board_init(void) { + DECLARE_GLOBAL_DATA_PTR; + + bd_t *bd; init_fnc_t **init_fnc_ptr; + /* Pointer is writable since we allocated a register for it. */ + gd = (gd_t *)CFG_GBL_DATA_OFFSET; + memset((void *)gd, 0, CFG_GBL_DATA_SIZE); + + gd->bd = (bd_t *)(gd+1); /* At end of global data */ + gd->baudrate = CONFIG_BAUDRATE; + + bd = gd->bd; + bd->bi_baudrate = CONFIG_BAUDRATE; + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { WATCHDOG_RESET (); if ((*init_fnc_ptr) () != 0) { Index: u-boot/include/configs/suzaku.h =================================================================== --- u-boot.orig/include/configs/suzaku.h +++ u-boot/include/configs/suzaku.h @@ -87,4 +87,14 @@ #define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ + +#define CFG_INIT_RAM_ADDR 0x80000000 /* inside of SDRAM */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + #endif /* __CONFIG_H */ Index: u-boot/microblaze_config.mk =================================================================== --- u-boot.orig/microblaze_config.mk +++ u-boot/microblaze_config.mk @@ -22,6 +22,8 @@ # MA 02111-1307 USA # +PLATFORM_CPPFLAGS += -ffixed-r31 + ifdef CONFIG_MICROBLAZE_HARD_MULT PLATFORM_CPPFLAGS += -mno-xl-soft-mul endif

2 2

[U-Boot-Users] [patch] add CFG_FLASH_SIZE in include/configs/suzaku.h
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this patch adds CFG_FLASH_SIZE in include/configs/suzaku.h. We have fixed size flash memory on board, so just define it. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed size flash memory on SUZAKU Index: u-boot/include/configs/suzaku.h =================================================================== --- u-boot.orig/include/configs/suzaku.h +++ u-boot/include/configs/suzaku.h @@ -47,6 +47,7 @@ #define CFG_SDRAM_BASE 0x80000000 #define CFG_SDRAM_SIZE 0x01000000 #define CFG_FLASH_BASE 0xfff00000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_RESET_ADDRESS 0xfff00100 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))

2 1

[U-Boot-Users] [patch] fix CONFIG_MICROBL*A*ZE typo
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this fix CONFIG_MICROBL*A*ZE typo all over the place. # OK I admit I don't use caps lock :< -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - fix CONFIG_MICROBL*A*ZE typo all over the place. sigh... Index: u-boot/include/configs/suzaku.h =================================================================== --- u-boot.orig/include/configs/suzaku.h +++ u-boot/include/configs/suzaku.h @@ -36,7 +36,7 @@ * (easy to change) */ -#define CONFIG_MICROBLZE 1 /* This is an MicroBlaze CPU */ +#define CONFIG_MICROBLAZE 1 /* This is an MicroBlaze CPU */ #define CONFIG_SUZAKU 1 /* on an SUZAKU Board */ /*----------------------------------------------------------------------- Index: u-boot/examples/stubs.c =================================================================== --- u-boot.orig/examples/stubs.c +++ u-boot/examples/stubs.c @@ -94,7 +94,7 @@ gd_t *global_data; " move.l (%%a0), %%a0\n" \ " jmp (%%a0)\n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "a0"); -#elif defined(CONFIG_MICROBLZE) +#elif defined(CONFIG_MICROBLAZE) /* * r31 holds the pointer to the global_data. r5 is a call-clobbered. */ Index: u-boot/README =================================================================== --- u-boot.orig/README +++ u-boot/README @@ -242,7 +242,7 @@ The following options need to be configu MicroBlaze based CPUs: ---------------------- - CONFIG_MICROBLZE + CONFIG_MICROBLAZE - Board Type: Define exactly one of Index: u-boot/drivers/serial_xuartlite.c =================================================================== --- u-boot.orig/drivers/serial_xuartlite.c +++ u-boot/drivers/serial_xuartlite.c @@ -24,7 +24,7 @@ #include <config.h> -#ifdef CONFIG_MICROBLZE +#ifdef CONFIG_MICROBLAZE #include <asm/serial_xuartlite.h>

2 1

[U-Boot-Users] [patch] add flush_cache() for MicroBlaze
by Yasushi SHOJI 11 Jul '04

11 Jul '04

hi, this patch adds flush_cache() for Microblaze. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add flush_cache() for MicroBlaze Index: u-boot/lib_microblaze/cache.c =================================================================== --- /dev/null +++ u-boot/lib_microblaze/cache.c @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2004 Atmark Techno, Inc. + * + * Yasushi SHOJI <yashi(a)atmark-techno.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +void flush_cache (ulong addr, ulong size) +{ + /* MicroBlaze have write thruough cache. nothing to do. */ + return; +} Index: u-boot/lib_microblaze/Makefile =================================================================== --- u-boot.orig/lib_microblaze/Makefile +++ u-boot/lib_microblaze/Makefile @@ -27,7 +27,7 @@ LIB = lib$(ARCH).a AOBJS = -COBJS = board.o microblaze_linux.o time.o +COBJS = board.o microblaze_linux.o time.o cache.o OBJS = $(AOBJS) $(COBJS)

2 1

[U-Boot-Users] [patch] add reset support for SUZAKU
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this patch adds reset support for SUZAKU FPGA board. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add reset support for SUZAKU Index: u-boot/board/AtmarkTechno/suzaku/suzaku.c =================================================================== --- u-boot.orig/board/AtmarkTechno/suzaku/suzaku.c +++ u-boot/board/AtmarkTechno/suzaku/suzaku.c @@ -22,8 +22,11 @@ * MA 02111-1307 USA */ -#include <common.h> +/* This is a board specific file. It's OK to include board specific + * header files */ +#include <asm/suzaku.h> void do_reset(void) { + *((unsigned long *)(MICROBLAZE_SYSREG_BASE_ADDR)) = MICROBLAZE_SYSREG_RECONFIGURE; } Index: u-boot/include/asm-microblaze/suzaku.h =================================================================== --- u-boot.orig/include/asm-microblaze/suzaku.h +++ u-boot/include/asm-microblaze/suzaku.h @@ -22,4 +22,7 @@ * MA 02111-1307 USA */ -/* EMPTY FILE */ +/* System Register (GPIO) */ +#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 +#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) +

2 1

[U-Boot-Users] [patch] add MicroBlaze and SUZAKU board to MAKEALL script
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this patch adds MicroBlaze and SUZAKU board to MAKEALL script. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add MicroBlaze and SUZAKU board to MAKEALL script Index: u-boot/MAKEALL =================================================================== --- u-boot.orig/MAKEALL +++ u-boot/MAKEALL @@ -187,6 +187,12 @@ LIST_nios=" \ DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20 \ " +######################################################################### +## MicroBlaze Systems +######################################################################### + +LIST_microblaze="suzaku" + #----------------------------------------------------------------------- #----- for now, just run PPC by default ----- @@ -211,6 +217,7 @@ do case "$arg" in ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \ arm|SA|ARM7|ARM9|pxa|ixp| \ + microblaze| \ mips| \ nios| \ x86|I486)

2 1

[U-Boot-Users] [patch] add myself to MAINTAINERS
by Yasushi SHOJI 11 Jul '04

11 Jul '04

hi, this patch adds myself to MAINTAINERS. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add myself to MAINTAINERS Index: u-boot/MAINTAINERS =================================================================== --- u-boot.orig/MAINTAINERS +++ u-boot/MAINTAINERS @@ -421,5 +421,16 @@ Scott McNutt <smcnutt(a)psyent.com> DK1C20 Nios-32 ######################################################################### +# MicroBlaze Systems: # +# # +# Maintainer Name, Email Address # +# Board CPU # +######################################################################### + +Yasushi Shoji <yashi(a)atmark-techno.com> + + SUZAKU MicroBlaze + +######################################################################### # End of MAINTAINERS list # #########################################################################

2 1

[U-Boot-Users] [patch] add myself to CREDITS
by Yasushi SHOJI 11 Jul '04

11 Jul '04

hi, this patch add myself to CREDITS. thanks, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add myself to CREDITS Index: u-boot/CREDITS =================================================================== --- u-boot.orig/CREDITS +++ u-boot/CREDITS @@ -328,6 +328,10 @@ N: Robert Schwebel E: r.schwebel(a)pengutronix.de D: Support for csb226, logodl and innokom boards (PXA2xx) +N: Yasushi Shoji +E: yashi(a)atmark-techno.com +D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board + N: Kurt Stremerch E: kurt(a)exys.be D: Support for Exys XSEngine board

2 1

[U-Boot-Users] [patch] add empty include/asm-microblaze/processor.h
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, here is a patch to add include/asm-microblaze/processor.h which is needed to cleanly run MAKEALL. regards, -- yashi * Patch by Yasushi SHOJI, 29 Jun 2004: - add empty include/asm-microblaze/processor.h Index: u-boot/include/asm-microblaze/processor.h =================================================================== --- /dev/null +++ u-boot/include/asm-microblaze/processor.h @@ -0,0 +1 @@ +/* FIXME: Implement this! */

2 1

[U-Boot-Users] What are IBAT and DBAT?
by Shawn 11 Jul '04

11 Jul '04

Hi, When trying to port u-boot to a MPC8245 card, I'm not sure what IBAT and DBAT register work for. For example, sl8245.h defines 4 regions of IBAT: SDRAM_BASE, 0x40000000, 0x80000000, and 0xf0000000. 1. Why are these regions defined? 2. Does it mean that you cannot access that memory area if the area hasn't been set by configuring IBAT and DBAT accordingly? 3. Can IBAT and DBAT be modified dynamically? For example, if I want to access 0x70000000 ~ 0x78000000 temporarily, which is not defined in configuration header file, can I change the configuration of one of IBAT and DBAT pair, e.g. ibat2 and dbat2? Thanks, -Shawn. __________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail

5 6

[U-Boot-Users] [PATCH] Support for Cerf PXA board
by prakash＠embedx.com 11 Jul '04

11 Jul '04

hi Wolfgang, Attached is a patch against the current CVS as of 27-06-04 for the PXA250 based Intrinsyc Cerf board. Currently , the patch boots the linux kernel to the prompt :-) Kindly apply. Best regards Prakash -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

2 1

[U-Boot-Users] [patch] one liner to fix comment in include/common.h
by Yasushi SHOJI 11 Jul '04

11 Jul '04

Hi, this is a simple patch to fix comment in include/common.h. flash_cache() is not only for ppc. -- yashi Index: include/common.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/common.h,v retrieving revision 1.42 diff -u -r1.42 common.h --- include/common.h 9 Jun 2004 21:04:50 -0000 1.42 +++ include/common.h 27 Jun 2004 00:07:08 -0000 @@ -466,7 +466,7 @@ /* $(CPU)/.../video.c */ ulong video_setmem (ulong); -/* ppc/cache.c */ +/* lib_$(ARCH)/cache.c */ void flush_cache (unsigned long, unsigned long);

2 1

[U-Boot-Users] [patch] add microblaze to mkimage
by Yasushi SHOJI 10 Jul '04

10 Jul '04

Hi, here is one liner to add microblaze support to mkimage. Again, string 'microblaze' is too long to break indentation. let me know if I should regenerate the patch to align the initializer. # it might be better for the record to split 'add new arch' and # 'reformat'. I don't see Changelog file in tools, do I still need a changelog entry for this? regards, -- yashi Index: mkimage.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/tools/mkimage.c,v retrieving revision 1.12 diff -u -r1.12 mkimage.c --- mkimage.c 26 Feb 2004 23:01:05 -0000 1.12 +++ mkimage.c 26 Jun 2004 15:40:08 -0000 @@ -82,6 +82,7 @@ { IH_CPU_ARM, "arm", "ARM", }, { IH_CPU_I386, "x86", "Intel x86", }, { IH_CPU_IA64, "ia64", "IA64", }, + { IH_CPU_MICROBLAZE, "microblaze", "MicroBlaze", }, { IH_CPU_MIPS, "mips", "MIPS", }, { IH_CPU_MIPS64, "mips64", "MIPS 64 Bit", }, { IH_CPU_PPC, "ppc", "PowerPC", },

2 1