December 2004 - U-Boot

[U-Boot-Users] Patch: Add support for Embedded Planet EP8248 board
by Yuli Barcohen 06 Aug '05

06 Aug '05

Hi, The attached patch adds support for Embedded Planet EP8248 board. It was tested on EP8248E revision 1.0. CHANGELOG: Add support for Embedded Planet EP8248 board -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================

2 1

[U-Boot-Users] [PATCH] BUGFIX: serial setting for kgdb
by HoJin 06 Aug '05

06 Aug '05

Hi, KGDB_SMC_INDEX must be used as the index for brg_map, but it is used direclty. (compared with function serial_init) So it does not work properly. I have tested it and it works fine. I noticed the same problem with 'serial_scc.c', but I could not test it yet. Patch for only for 'serial_smc.c' is attached. Index: cpu/mpc8260/serial_smc.c =================================================================== --- cpu/mpc8260/serial_smc.c (revision 65) +++ cpu/mpc8260/serial_smc.c (working copy) @@ -360,10 +360,10 @@ /* Set up the baud rate generator. */ #if defined(CONFIG_KGDB_USE_EXTC) - m8260_cpm_extcbrg(KGDB_SMC_INDEX, speed, + m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed, CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); #else - m8260_cpm_setbrg(KGDB_SMC_INDEX, speed); + m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed); #endif /* Make the first buffer the only buffer. -- Hojin

2 1

[U-Boot-Users] [PATCH] MII help text formatting fix
by Cory Tusar 06 Aug '05

06 Aug '05

Attached is a patch fixing a minor glitch in the 'mii help' text formatting. Picky, picky, I know... Patch was generated against current CVS sources. CHANGELOG: * Patch by Cory Tusar, 10 Dec 2004: Fixed 'mii help' text formatting. -Cory -- Cory T. Tusar Embedded Systems Engineer Videon Central, Inc. 2171 Sandy Drive State College, PA 16801 (814) 235-1111 x316 (814) 235-1118 fax "Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." --Brian W. Kernighan Index: common/cmd_mii.c =================================================================== RCS file: /home/cvs/u-boot/common/cmd_mii.c,v retrieving revision 1.1.1.1 retrieving revision 1.2 diff -u -r1.1.1.1 -r1.2 --- common/cmd_mii.c 7 Dec 2004 14:49:03 -0000 1.1.1.1 +++ common/cmd_mii.c 8 Dec 2004 17:42:39 -0000 1.2 @@ -549,7 +549,7 @@ U_BOOT_CMD( mii, 5, 1, do_mii, "mii - MII utility commands\n", - "info <addr> - display MII PHY info\n" + "info <addr> - display MII PHY info\n" "mii read <addr> <reg> - read MII PHY <addr> register <reg>\n" "mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n" "mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"

2 1

[U-Boot-Users] [Patch] bugfix:return value of NFS command
by Hiroshi Ito 06 Aug '05

06 Aug '05

Hello, 1.nfs command return code is depend on umount-all, but not state of downloading. 2.When fail to write flash, it doesn't change state to umount example1: ---nfs server--- [mldbox]# ls -l u-boot.bin ---------- 1 root root 204048 Dec 11 02:06 u-boot.bin --- u-boot --- # if nfs 80400000 192.168.3.98:/usr/src/mldbox/u-boot.bin; then echo ok; else echo error; fi Trying i82559#0 Using i82559#0 device File transfer via NFS from server 192.168.3.98; our IP address is 192.168.3.200 Filename '/usr/src/mldbox/u-boot.bin'. Load address: 0x80400000 Loading: * done ok <= Wrong!! example2: [root@tv mldbox]# rm u-boot.bin rm: remove regular file `u-boot.bin'? y [root@tv mldbox]# # if nfs 80400000 192.168.3.98:/usr/src/mldbox/u-boot.bin; then echo ok; else echo error; fi Trying i82559#0 Using i82559#0 device File transfer via NFS from server 192.168.3.98; our IP address is 192.168.3.200 Filename '/usr/src/mldbox/u-boot.bin'. Load address: 0x80400000 Loading: *** ERROR: File lookup fail done ok <= Wrong!! # attached patch fixes these problems. patch is for current CVS. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256

3 2

[U-Boot-Users] SCSI support for MIB405 board
by Wolfgang Denk 04 Aug '05

04 Aug '05

Dear Denis, can you tell me something about the SCSI support in the current versions of U-Boot? It seems the MIB405 board (maintained by you) has SCSI support enabled, but the whole code in common/cmd_scsi.c seemd to be unused - for example, there is no caller of do_scsi() or do_scsiboot() anywhere in the whole source tree? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de In general, they do what you want, unless you want consistency. - Larry Wall in the perl man page

2 4

[U-Boot-Users] [Patch] default filename of tftp and nfs
by Hiroshi Ito 04 Aug '05

04 Aug '05

Hello, default filename of tftp and nfs has different value between little endian machine and big one. This patch fixes endian problem. Patch is for current cvs. -------- Hiroshi Ito Media Lab. Inc., URL http://www.mlb.co.jp ( Sorry, Japanese only. ) TEL +81-3-5294-7255 FAX +81-3-5294-7256

2 2

[U-Boot-Users] u-boot 1.1.1 and USB mass storage devices
by Shannon Holland 03 Aug '05

03 Aug '05

Hello, We are using u-boot on a Samsung S3C2410 based board and have USB mostly working using the arm920t USB driver. I say mostly working as some mass storage devices work fine, but most do not. Typically the behavior we see when they don't work is a "usb reset" reports the correct number of devices, a "usb tree" will return the correct device tree but "usb scan" will typically return a lot of CLI:TIMEOUT errors and seemingly never return. Sometimes it is able to find the storage device, but reading from it (it has a FAT16 filesystem) will return similar errors. I'm curious if these are known problems or likely to be something in the way we have (or have not) set up usb? Might anyone have some recommendations as to where to start looking? Thanks for any help! Shannon

5 8

[U-Boot-Users] Loading FPGA from an mkimage created image?
by Steven Scholz 10 Jun '05

10 Jun '05

Hi there, I know that fpga load [device number] [image address] [image size] can be used to init an FPGA. Now I want to compress and wrap the FPGA data with mkimage. Is there a way to pass the address of an Image to "fpga load". Or do I have to umcompress it first using "bootm" or something and then pass the address and size to "fpga load"? Thanks! -- Steven Scholz

2 7

[U-Boot-Users] mkimage for DOS
by Dave Westwood 10 Jun '05

10 Jun '05

long shot really, but does anyone have a working executable mkimage for DOS or a dos window in windows (don't flame me for using windows !!)

2 1

Re: [U-Boot-Users] Support for Samsung 1Giga bit NAND device
by Laurent Mohin 01 Jun '05

01 Jun '05

Andy, U-boot 1.1.0 doesn't provide support for NAND flash with a page size of 2K-byte instead of 512 byte (and you're right, theses devices require special handling). Pantelis Antoniou submitted a patch on 2004-04-30 which seems to manage these new chips, but I don't think it has been added to the latest CVS tree. By the way, Samsung also offer 1 Giga bit devices with a 512 byte page size (K9K1G08UOM - Manufacturer ID : 0xEC, Chip ID: 0x79). Hope this helps, Laurent Andy Hawkins <a.hawkins(a)cabletime.com> Sent by: u-boot-users-admin(a)lists.sourceforge.net 14/06/04 13:40 To: u-boot-users(a)lists.sourceforge.net cc: Subject: [U-Boot-Users] Support for Samsung 1Giga bit NAND device Hi, Can anyone tell me if U-Boot has support for the Samsung 1 Giga Bit NAND devices (Manufacturer ID: 0xec, Chip ID: 0xf1)? I understand these devices have an unusually large block size, that needs special handling. Is this correct? Thanks. Andy ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

4 8