October 2004 - U-Boot

[U-Boot-Users] Unable to run hello_world
by Jim McNamara 11 Oct '04

11 Oct '04

Hi all, I'm working on an mcf5272 based board that has 32MB of Flash arranged in uniform sectors of 64KB and 16MB of SDRAM. I've managed to get u-boot to start from Flash and successfully relocate to SDRAM. Below is the debug output from the console: DRAM: 16 MB Reserving 217k for U-Boot at: 00fc9000 Reserving 256k for malloc() at: 00f89000 Reserving 64 Bytes for Board Info at: 00f88fc0 Reserving 48 Bytes for Global Data at: 00f88f90 Reserving 64k for boot parameters at: 00f78f90 Stack Pointer at: 00f78f78 Start relocate of code from fe000400 to 00fc9000 Now running in RAM - U-Boot at: 00fc9000 FLASH: flash_protect ON: from 0xFE000000 to 0xFE03FFFF protect on 0 protect on 1 protect on 2 protect on 3 32 MB In: serial Out: serial Err: serial U-Boot relocated to 00fc9000 No PHY device found. ### main_loop entered: bootdelay=5 ### main_loop: bootcmd="<UNDEFINED>" I've configured the hello_world example program to run from SDRAM at 0x40000. Here's a dump of the elf headers: hello_world: file format elf32-m68k Sections: Idx Name Size VMA LMA File off Algn 0 .text 000001de 00040000 00040000 00002000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .rodata 0000008a 000401de 000401de 000021de 2**0 CONTENTS, ALLOC, LOAD, READONLY, DATA 2 .data 00000000 00042268 00042268 00002268 2**2 CONTENTS, ALLOC, LOAD, DATA 3 .got 00000048 00042268 00042268 00002268 2**2 CONTENTS, ALLOC, LOAD, DATA 4 .bss 00000000 000422b0 000422b0 000022b0 2**2 ALLOC 5 .stab 00000e40 00000000 00000000 000022b0 2**2 CONTENTS, READONLY, DEBUGGING 6 .stabstr 00001d3a 00000000 00000000 000030f0 2**0 CONTENTS, READONLY, DEBUGGING 7 .comment 0000014c 00000000 00000000 00004e2a 2**0 CONTENTS, READONLY I can load the resultant binary using the loadb command but an exception is generated when I attempt to run the program: -> loadb ## Ready for binary (kermit) download to 0x00040000 at 19200 bps... ## Total Size = 0x000022b0 = 8880 Bytes ## Start Addr = 0x00040000 -> go 40004 ## Starting application at 0x00040004 ... *** Unexpected exception *** Vector Number: 4 Format: 04 Fault Status: 0 PC: 00ff97b8 SR: 00002004 SP: 00f78c20 D0: 00000004 D1: 000006d0 D2: 00ffa12c D3: 00000000 D4: 00000000 D5: 00000000 D6: 00000001 D7: 00f88f90 A0: 00ff97b8 A1: 00fe9fc8 A2: 00040004 A3: 00000000 A4: 00f78ce0 A5: 00ff8500 A6: 00f78cac *** Please Reset Board! *** I had a look at what's going on with the debugger - hello_world is jumping to an incorrect address (0xff97b8). This happens at the very start of the program. I've read through the README and DULG I've scoured the mailing list archive. I still haven't been able to come up with a solution. Any ideas as to what I could be doing wrong?? Thanks for any help you can give. Regards, Jim...

2 2

[U-Boot-Users] BDI2000/U-BOOT/ARM, need HELP
by raymond yang 11 Oct '04

11 Oct '04

Hello, I am not a native english speaker, sorry for my stupid english forehand. I am trying to learn the famous U-BOOT. My kit is: -BDI2000 -ARM7(S3C44B0) (Compiled from /DAVE/B2) My working log here: 1) First stuff very strange (gdb) file u-boot Reading symbols from u-boot...done. (gdb) target remote 192.168.0.17:2001 Remote debugging using 192.168.0.17:2001 0x00000000 in ?? () (gdb) step <=========odd here!!! Cannot find bounds of current function <=========odd here!!! (gdb) 2) Second stuff very strange Then i change it to (gdb) load Loading section .text, size 0x152b4 lma 0xc100000 Loading section .rodata, size 0x4a40 lma 0xc1152b4 Loading section .data, size 0xc28 lma 0xc119cf4 Loading section .u_boot_cmd, size 0x4b0 lma 0xc11a91c Start address 0xc100000, load size 110028 Transfer rate: 176044 bits/sec, 301 bytes/write. However, in the telnet from the BDI2000 Core#0>info Core number : 0 Core state : debug mode (ARM) Debug entry cause : Debug Request <===============Odd here Current PC : 0x0c100000 <===============Odd here Current CPSR : 0x000000d3 (Supervisor) 3) The third one (gdb) b cpu_init_crit Breakpoint 1 at 0xc1000b4: file /debug/u-boot-1.1.1/cpu/s3c44b0/start.S, line 189. (gdb) c Continuing. warning: Cannot insert breakpoint 1: Error accessing memory address 0xc1000b4: Unknown error 4294967295. Here the telenet console show me Core#0> # TARGET: all hardware breakpoints in use Actually, i just hard reset both the BDI2000 and the target board, and restart the gdb, and no breakpoint at all. Any big brother could help? Very appreciate! Best Regards Techie _______________________________ Do you Yahoo!? Express yourself with Y! Messenger! Free. Download now. http://messenger.yahoo.com

1 0

[U-Boot-Users] help> on 8260 board, linux hangs
by 김형기 11 Oct '04

11 Oct '04

i ported uboot-1.0.0 with success on my board , it works fine ( i think ) i can download kernel image and no problem with mtest but when i enter "bootm" "Uncompressing kernel...OK" and no more message but i tested it with a reference board , uboot-1.0.0 and kernel 2.4.4 from (www.denx.de) on reference board it wokrs find ( i searched mailing-list and found "Uncompress...." problem because of HZ issue or bd_t type error i think that is not my case ) i have no reference board circuit but i tried to designe my board with same momery ( type and size) , just they differs in CPU version ( reference is A.1 1K22A-XC , my board is C.2 6K23A could it cause a problem ? ) i use the same uboot in both boards i have no idea what is wrong ? SW or HW ? give me some ideas or hints thanks in advance

1 0

[U-Boot-Users] [440GX/reset]
by Barbier, Renaud (GE Infrastructure) 11 Oct '04

11 Oct '04

This question is not related to U-boot(reset) in perticular but the 440GX. I did not get a response that answer my question from IBM or AMCC. In the 440GX PCI registers at offset 0xd4, there is the power managemement register. if you write 3 then 0 it should reset the 440GX. However, once Linux or U-boot are booted, this does not work anymore. I have not found what prevent the reset. If you have any clue, please let me know.

1 0

[U-Boot-Users] [patch] A parameter error in main.c
by Sam Song 11 Oct '04

11 Oct '04

Hi list, A parameter error was found in a run_command function. Patch below to fix it. * Patch by Sam Song, 11 October 2004: - Fix a parameter of run_command in main.c ===== Best regards, Sam _________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_… Index: common/main.c =================================================================== RCS file: /cvsroot/u-boot/u-boot/common/main.c,v retrieving revision 1.20 diff -p -u -r1.20 main.c --- common/main.c 23 Apr 2004 20:32:06 -0000 1.20 +++ common/main.c 10 Oct 2004 00:51:18 -0000 @@ -432,7 +432,7 @@ void main_loop (void) s = getenv("menucmd"); if (s) { # ifndef CFG_HUSH_PARSER - run_command (s, bd, 0); + run_command (s, 0); # else parse_string_outer(s, FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP);

1 0

[U-Boot-Users] Bug in PXA get_timer function
by Craig Hughes 11 Oct '04

11 Oct '04

There's a timer rollover bug in the u-boot PXA code, fixed by the attached patch. Before this patch, timer events around the edges of the OSTimer rollover would calculate wildly incorrect values for get_timer(foo) where foo!=0. C

2 1

[U-Boot-Users] Resubmit of PATCH MPC82XX RevA Support
by Jon Loeliger 11 Oct '04

11 Oct '04

Wolfgang, The following resubmission of the patch by Gridish Shlomi adds support for the revA version of PQ27 and PQ27E. I believe that this will fix the problems reported on this list a week or two ago and discussed here: RE: [U-Boot-Users] MPC8272ADS and uboot program check Please let me know if this patch doesn't apply against the current top-of-CVS. This patch obsoletes the previous patch I submitted earlier with the subject "PATCH MPC82XX RevA Support". Thanks, jdl * Patch by Gridish Shlomi, 30 Aug 2004: Added support to revA version of PQ27 and PQ27E. Reverted baudrate back to original 115200 after unexplained change to 38400 from rev 1.16 to 1.17. diff -purN --exclude=CVS u-boot-u_boot_20040823/cpu/mpc8260/cpu.c u-boot-ppc82xx/cpu/mpc8260/cpu.c --- u-boot-u_boot_20040823/cpu/mpc8260/cpu.c Thu Apr 15 13:22:43 2004 +++ u-boot-ppc82xx/cpu/mpc8260/cpu.c Tue Sep 21 16:30:09 2004 @@ -68,6 +68,7 @@ int checkcpu (void) k = 4; break; case PVR_8260_HIP7R1: + case PVR_8260_HIP7RA: case PVR_8260_HIP7: k = 7; break; @@ -129,9 +130,20 @@ int checkcpu (void) case 0x0A01: puts ("0.1 1K49M"); break; + case 0x0A10: + puts ("1.0 1K49M"); + break; case 0x0C00: + puts ("0.0 0K50M"); + break; + case 0x0C10: + puts ("1.0 0K50M"); + break; case 0x0D00: - printf ("0.0 0K50M"); + puts ("0.0 0K50M"); + break; + case 0x0D10: + puts ("1.0 0K50M"); break; default: printf ("unknown [immr=0x%04x,k=0x%04x]", m, k); diff -purN --exclude=CVS u-boot-u_boot_20040823/cpu/mpc8260/i2c.c u-boot-ppc82xx/cpu/mpc8260/i2c.c --- u-boot-u_boot_20040823/cpu/mpc8260/i2c.c Fri Jun 27 16:32:35 2003 +++ u-boot-ppc82xx/cpu/mpc8260/i2c.c Thu Sep 23 09:45:38 2004 @@ -149,7 +149,7 @@ i2c_roundrate(int hz, int speed, int fil PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv)); - *brgval = (brgdiv / 2) - 3 - (2*filter); + *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter); if ((*brgval < 0) || (*brgval > 255)) { PRINTD(("\t\trejected brgval=%d\n", *brgval)); @@ -158,7 +158,7 @@ i2c_roundrate(int hz, int speed, int fil brgdiv = 2 * (*brgval + 3 + (2 * filter)); div = moddiv * brgdiv ; - *totspeed = (hz + div - 1) / div; + *totspeed = hz / div; PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed)); diff -purN --exclude=CVS u-boot-u_boot_20040823/cpu/mpc8260/speed.c u-boot-ppc82xx/cpu/mpc8260/speed.c --- u-boot-u_boot_20040823/cpu/mpc8260/speed.c Tue Mar 23 16:14:28 2004 +++ u-boot-ppc82xx/cpu/mpc8260/speed.c Thu Sep 23 09:46:27 2004 @@ -125,7 +125,10 @@ int get_clocks (void) busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT; cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT; - if ((get_pvr () == PVR_8260_HIP7) || (get_pvr () == PVR_8260_HIP7R1)) { /* HiP7 */ + /* HiP7, HiP7 Rev01, HiP7 RevA */ + if ((get_pvr () == PVR_8260_HIP7) || + (get_pvr () == PVR_8260_HIP7R1) || + (get_pvr () == PVR_8260_HIP7RA)) { pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT; gd->vco_out = clkin * (pllmf + 1); } else { /* HiP3, HiP4 */ diff -purN --exclude=CVS u-boot-u_boot_20040823/include/asm-ppc/processor.h u-boot-ppc82xx/include/asm-ppc/processor.h --- u-boot-u_boot_20040823/include/asm-ppc/processor.h Fri Jul 9 18:27:15 2004 +++ u-boot-ppc82xx/include/asm-ppc/processor.h Tue Sep 21 16:30:09 2004 @@ -764,6 +764,7 @@ #define PVR_8260_HIP4 0x80811014 #define PVR_8260_HIP7 0x80822011 #define PVR_8260_HIP7R1 0x80822013 +#define PVR_8260_HIP7RA 0x80822014 /* diff -purN --exclude=CVS u-boot-u_boot_20040823/include/configs/MPC8260ADS.h u-boot-ppc82xx/include/configs/MPC8260ADS.h --- u-boot-u_boot_20040823/include/configs/MPC8260ADS.h Wed Jun 9 05:15:02 2004 +++ u-boot-ppc82xx/include/configs/MPC8260ADS.h Tue Sep 21 16:30:09 2004 @@ -175,7 +175,7 @@ #endif #endif -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 115200 #define CFG_EXCLUDE CFG_CMD_BEDBUG | \ CFG_CMD_BMP | \

3 3

[U-Boot-Users] [Patch] Obvious miss-typed in cfi_flash.c
by HoJin 11 Oct '04

11 Oct '04

Hi, During the test for 64bit port-width flash, I found a litte miss-typing. It works well after a little fix. Regards Hojin =================================================================== RCS file: /cvsroot/u-boot/u-boot/drivers/cfi_flash.c,v retrieving revision 1.10 diff -u -b -B -w -p -r1.10 cfi_flash.c --- drivers/cfi_flash.c 12 Jul 2004 22:34:52 -0000 1.10 +++ drivers/cfi_flash.c 17 Sep 2004 08:44:03 -0000 @@ -1099,7 +1099,7 @@ static int flash_write_cfiword (flash_in flag = ((cptr.lp[0] & cword.l) == cword.l); break; case FLASH_CFI_64BIT: - flag = ((cptr.lp[0] & cword.ll) == cword.ll); + flag = ((cptr.llp[0] & cword.ll) == cword.ll); break; default: return 2;

2 1

[U-Boot-Users] [PATCH] mtest wrong error message
by Mark Jonas 11 Oct '04

11 Oct '04

Hello, the CFG_ALT_MEMTEST mtest returns a wrong error message in case the data line test fails with the inverted pattern. The "is" and the "should be" values were exchanged. Additionally, the "should be" value was not inverted when printing. This patch fixes this. Regards Mark Index: u-boot/common/cmd_mem.c diff -u u-boot/common/cmd_mem.c:1.5 u-boot/common/cmd_mem.c:1.6 --- u-boot/common/cmd_mem.c:1.5 Tue Jul 13 12:40:29 2004 +++ u-boot/common/cmd_mem.c Thu Sep 9 11:51:35 2004 @@ -736,7 +736,7 @@ if(readback != ~val) { printf ("FAILURE (data line): " "Is %08lx, should be %08lx\n", - val, readback); + readback, ~val); } } } * Patch by Mark Jonas, 09 September 2004: mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong error message. Fixed.

2 1

[U-Boot-Users] [patch] A typo in doc/README.autoboot
by samlinuxkernel＠netscape.net 11 Oct '04

11 Oct '04

Hi list, Bother the list again. This is my only overall English E-box. If sth still went wrong, feed back to me. Still one patch is waitting to send. :-) Best regards, Sam CHANGELOG: * Patch by Sam Song, 10 October 2004: - Fix a typo in doc/README.autoboot __________________________________________________________________ Switch to Netscape Internet Service. As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register Netscape. Just the Net You Need. New! Netscape Toolbar for Internet Explorer Search from anywhere on the Web and block those annoying pop-ups. Download now at http://channels.netscape.com/ns/search/install.jsp Index: doc/README.autoboot =================================================================== RCS file: /cvsroot/u-boot/u-boot/doc/README.autoboot,v retrieving revision 1.3 diff -p -u -r1.3 README.autoboot --- doc/README.autoboot 14 Jul 2003 22:13:45 -0000 1.3 +++ doc/README.autoboot 10 Oct 2004 00:49:54 -0000 @@ -138,10 +138,10 @@ What they do character of a key string does not appear in the rest of the string. - Using the CONFIG_AUTOBOOT_DELAY_STR2 / bootdelaykey2 and/or - CONFIG_AUTOBOOT_STOP_STR2 / bootstopkey #defines and/or - environment variables you can specify a second, alternate - string (which allows you to have two "password" strings). + Using the CONFIG_AUTOBOOT_DELAY_STR2 and/or CONFIG_AUTOBOOT_STOP_STR2 + #defines and/or environment variables bootdelaykey2 and/or bootstopkey2, + you can specify a second, alternate string (which allows you to have + the possibility to give the option "password" to your boss:-). CONFIG_ZERO_BOOTDELAY_CHECK

2 1

[U-Boot-Users] [PATCH] Option to enable XLB pipelining in MPC5200
by Mark Jonas 11 Oct '04

11 Oct '04

Hello, this patch adds the option CFG_XLB_PIPELINING to cpu/mpc5xxx/cpu_init.c to enable XLB pipelining. This improves FTP performance and is enabled in IceCube by default. Other MPC5200 boards should benefit from this as well. Regards Mark cpu/mpc5xxx/cpu_init.c | 5 +++++ cpu/mpc5xxx/pci_mpc5200.c | 5 ----- include/configs/IceCube.h | 2 ++ 3 files changed, 7 insertions(+), 5 deletions(-) * Patch by Mark Jonas, 31 August 2004: Added option CFG_XLB_PIPELINING to cpu/mpc5xxx/cpu_init.c to enable XLB pipelining. This improves FTP performance and is enabled in IceCube by default.

2 1

[U-Boot-Users] Re: [Pacth]Some fixes on RPXlite DW
by Sam Song 11 Oct '04

11 Oct '04

Sam Song <samsongshu(a)yahoo.com.cn> wrote： > Hi, > > I got a nudge from some folk chatting with Wolfgang > about RESET and did this patch. All for RPXlite_DW > board. > > * Patch by Sam Song, 21 August 2004: > - Add RESET support for RPXlite_DW board > - Adjust CPU:BUS frequency rato 1:1 when core > frequency less than 50MHz OK, I give up this patch for it as updated as follows and all against CVS: * Patch by Sam Song, 31 August 2004: - Updating RPXlite_DW board on RESET/PREBOOT Index: board/RPXlite_dw/README =================================================================== RCS file: /cvsroot/u-boot/u-boot/board/RPXlite_dw/README,v retrieving revision 1.1 diff -p -u -r1.1 README --- board/RPXlite_dw/README 9 Jun 2004 21:04:49 -0000 1.1 +++ board/RPXlite_dw/README 31 Aug 2004 01:58:04 -0000 @@ -2,9 +2,9 @@ After following the step of Yoo. Jonghoon and Wolfgang Denk, I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW. -There are three differences between the Yoo-ported RPXlite and the RPXlite_DW. +There are at least three differences between the Yoo-ported RPXlite and the RPXlite_DW. -Board(in U-BOOT) version(in EmbeddedPlanet) CPU SDRAM FLASH +Board(in U-Boot) version(in EmbeddedPlanet) CPU SDRAM FLASH RPXlite RPXlite CW 850 16MB 4MB RPXlite_DW RPXlite DW 823e 64MB 16MB @@ -17,6 +17,7 @@ It has the following three features: The default setting is 48MHz.To get a 64MHz u-boot,just add '64' in make command,like +make distclean make RPXlite_DW_64_config make all @@ -28,19 +29,21 @@ didn't use EEPROM for ENV is that Planet home.Because of the possibility of using two firewares on this board,I didn't 'disturb' EEPROM.To get NVRAM support,you may use the following build command: +make distclean make RPXlite_DW_NVRAM_config make all 3. LCD panel support -To support the Platform better,I added LCD panel(NL6448BC20-08) function.But bewear of -the fact that once you build this support and program it to FLASH,you should make sure -you put workable kernel and ramdisk at the right place in FLASH or through NFS. -Otherwise, you must erase this fireware manually via BDI2000 or ICE tools.So this -function is used for deployment and demo only.Pls look before you leap. +To support the Platform better, I added LCD panel(NL6448BC20-08) function. +For the convenience of debug, CONFIG_PERBOOT was supported. So you just +perss ENTER if you want to get a serial console in boot count down. +Then you can switch to LCD and serial console freely just typing +'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled. To get a LCD support u-boot,you can do the following: +make distclean make RPXlite_DW_LCD_config make all @@ -68,7 +71,7 @@ make RPXlite_DW_64_LCD_config The boot process by "make RPXlite_DW_config" could be: -U-Boot 1.1.1 (Jun 8 2004 - 11:16:30) +U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache Board: RPXlite_DW @@ -84,6 +87,64 @@ u-boot> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A word on the U-Boot enviroment variable setting and usage : + +In the beginning, you could just need very simple defult environment variable setting, +like[include/configs/RPXlite.h] : + +#define CONFIG_BOOTCOMMAND \ + "bootp; " \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ + "bootm" + +This is enough for kernel NFS test. But as debug process goes on, you would expect +to save some time on environment variable setting and u-boot/kernel updating. +So the default environment variable setting would become more complicated. Just like +the one I did in include/configs/RPXlite_DW.h. + +Two u-boot commands, ku and uu, should be careful to use. They were designed to update +kernel and u-boot image file respectively. You must tftp your image to default address +'100000' and then use them correctly. Yeah, you can create your own command to do this +job. :-) The example u-boot image updating process could be : + +u-boot>t 100000 RPXlite_DW_LCD.bin +Using SCC ETHERNET device +TFTP from server 172.16.115.6; our IP address is 172.16.115.7 +Filename 'RPXlite_DW_LCD.bin'. +Load address: 0x100000 +Loading: ############################# +done +Bytes transferred = 144700 (2353c hex) +u-boot>run uu +Un-Protect Flash Sectors 0-4 in Bank # 1 +Erase Flash Sectors 0-4 in Bank # 1 +.... done +Copy to Flash... done +ff000000: 27051956 552d426f 6f742031 2e312e32 '..VU-Boot 1.1.2 +ff000010: 20284175 67203239 20323030 34202d20 (Aug 29 2004 - +ff000020: 31353a32 303a3238 29000000 00000000 15:20:28)....... +ff000030: 00000000 00000000 00000000 00000000 ................ +ff000040: 00000000 00000000 00000000 00000000 ................ +ff000050: 00000000 00000000 00000000 00000000 ................ +ff000060: 00000000 00000000 00000000 00000000 ................ +ff000070: 00000000 00000000 00000000 00000000 ................ +ff000080: 00000000 00000000 00000000 00000000 ................ +ff000090: 00000000 00000000 00000000 00000000 ................ +ff0000a0: 00000000 00000000 00000000 00000000 ................ +ff0000b0: 00000000 00000000 00000000 00000000 ................ +ff0000c0: 00000000 00000000 00000000 00000000 ................ +ff0000d0: 00000000 00000000 00000000 00000000 ................ +ff0000e0: 00000000 00000000 00000000 00000000 ................ +ff0000f0: 00000000 00000000 00000000 00000000 ................ +u-boot updating finished +u-boot> + +Also for environment updating, 'run eu' could let you erase OLD default environment variable +and then use the working u-boot environment setting. + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + I'd like to extend my heartfelt gratitute to kind people for helping me work it out. I would particually thank Wolfgang Denk for his nice help. @@ -93,4 +154,4 @@ Sam Song, samsongshu(a)yahoo.com.cn Institute of Electrical Machinery and Controls Shanghai University -June 8,2004 +August 29,2004 Index: include/configs/RPXlite_DW.h =================================================================== RCS file: /cvsroot/u-boot/u-boot/include/configs/RPXlite_DW.h,v retrieving revision 1.2 diff -p -u -r1.2 RPXlite_DW.h --- include/configs/RPXlite_DW.h 19 Jun 2004 21:19:13 -0000 1.2 +++ include/configs/RPXlite_DW.h 31 Aug 2004 01:58:21 -0000 @@ -60,18 +60,20 @@ #define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */ #ifdef CONFIG_LCD -#define CONFIG_BOOTDELAY 12 /* autoboot after 12 seconds */ +#define CONFIG_BOOTDELAY 6 /* autoboot after 12 seconds */ #else #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #endif +/* pre-boot commands */ +#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" + #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "nfsargs=setenv bootargs console=ttyS0,9600 root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "ramargs=setenv bootargs console=tty0 console=ttyS0,9600 " \ - "root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \ + "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ ":$(hostname):$(netdev):off panic=1\0" \ @@ -82,9 +84,19 @@ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "gatewayip=172.16.115.254\0" \ "netmask=255.255.255.0\0" \ - "kernel_addr=ff880000\0" \ - "ramdisk_addr=ff980000\0" \ - "" + "kernel_addr=ff040000\0" \ + "ramdisk_addr=ff200000\0" \ + "ku=era $(kernel_addr) ff1fffff;cp.b 100000 $(kernel_addr) " \ + "$(filesize);md $(kernel_addr);" \ + "echo kernel updating finished\0" \ + "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \ + "$(filesize);md ff000000;" \ + "echo u-boot updating finished\0" \ + "eu=protect off 1:6;era 1:6;reset\0" \ + "lcd=setenv stdout lcd;setenv stdin lcd\0" \ + "ser=setenv stdout serial;setenv stdin serial\0" \ + "verify=no" + #define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -178,6 +190,8 @@ #define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ #endif +#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res))) + /*----------------------------------------------------------------------- * Cache Configuration */ @@ -249,9 +263,12 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF00 -/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */ +/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */ +#if defined(RPXlite_64MHz) #define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */ - +#else +#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ +#endif /*----------------------------------------------------------------------- * PCMCIA stuff *----------------------------------------------------------------------- _________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_…

2 1

[U-Boot-Users] [PATCH] Running from SDRAM Detection on omap1510inn
by Michael Bendzick 11 Oct '04

11 Oct '04

Included is a patch that improves the detection scheme in platform.S that the omap1510inn build uses to determine whether or not it is running from SDRAM. The result of the detection is used to determine if the SDRAM configuration registers are safe to change. The previous implementation only made a distinction between running from Flash at 0x0 or SDRAM at 0x10000000. This patch allows U-Boot to run from internal SRAM at 0x20000000 as well and still realize that it can safely configure external SDRAM. Attention 1610 Innovator Users/Owners: Please give this patch a try on your boards as well, as it should work exactly the same. Change log snippet: * Patch by Michael Bendzick, 30 Aug 2004: - Improve platform.S code for omap1510inn that detects whether code is running from SDRAM or not. Patch allows SDRAM to be configured if code is running out of SRAM at 0x20000000. -Michael Bendzick Systems and Software Engineering Logic Product Development www.logicpd.com

2 1

[U-Boot-Users] Re: FW: Wind River SBC8560 Uboot support
by Wolfgang Denk 11 Oct '04

11 Oct '04

In message <FB3BAE941CB9B24782B2DE43D755BD89040CD818(a)ala-mail02.wrs.com> you wrote: > > In accordance with our last correspondence, I have made the following > modifications to the attached patch, u-boot-1.1.1-Wr_SBC85xxPQ3.patch. This > patch will upgrade u-boot-1.1.1 to support WindRiver's SBC8560/8540 > PowerQUICCIII board. Mostly added, thanks. The parts NOT added are as follows: diff -Naur ../u-boot-1.1.1/cpu/mpc85xx/interrupts.c ./cpu/mpc85xx/interrupts.c --- ../u-boot-1.1.1/cpu/mpc85xx/interrupts.c 2003-10-15 19:53:51.000000000 -0400 +++ ./cpu/mpc85xx/interrupts.c 2004-08-27 13:01:50.000000000 -0400 None of the other existing 85xx boards needs functions get_tbl() or set_tbl() like you do. Since interrupt handling is definitely not board dependent I would like to understand why you think you need this stuff while others can do without it. diff -Naur ../u-boot-1.1.1/cpu/mpc85xx/tsec.c ./cpu/mpc85xx/tsec.c --- ../u-boot-1.1.1/cpu/mpc85xx/tsec.c 2004-04-18 17:45:44.000000000 -0400 +++ ./cpu/mpc85xx/tsec.c 2004-08-30 12:04:30.000000000 -0400 ... diff -Naur ../u-boot-1.1.1/cpu/mpc85xx/tsec.h ./cpu/mpc85xx/tsec.h --- ../u-boot-1.1.1/cpu/mpc85xx/tsec.h 2004-04-18 17:45:44.000000000 -0400 +++ ./cpu/mpc85xx/tsec.h 2004-08-27 14:31:49.000000000 -0400 ... Patches don't apply against CVS tree. Please clean up your code and resubmit new patch against top of tree in CVS. diff -Naur ../u-boot-1.1.1/README ./README --- ../u-boot-1.1.1/README 2004-04-23 16:32:05.000000000 -0400 +++ ./README 2004-08-27 13:11:30.000000000 -0400 Please resubmit and keep lists sorted! Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd(a)denx.de Nothing ever becomes real until it is experienced. - John Keats

1 0

[U-Boot-Users] [PATCH] Configure omap1510inn board to use drivers/cfi_flash.c
by Michael Bendzick 11 Oct '04

11 Oct '04

Included is a patch to make the TI OMAP 1510 Innovator board make use of the CFI driver and buffered writes, increasing the write speed by a factor of about 10. Change log snippet: * Patch by Michael Bendzick, 30 Aug 2004: - Configure omap1510inn board to use drivers/cfi_flash.c Wolfgang: Note that this patch entirely removes board/omap1510inn/flash.c. If you would prefer to keep this file around for posterity, I could resubmit the patch. -Michael Bendzick Systems and Software Engineering Logic Product Development www.logicpd.com

2 1

[U-Boot-Users] [PATCH] lpd7a40x register defs, include consolidation
by Paul Ruhland 10 Oct '04

10 Oct '04

Wolfgang, I know you dislike large patches with many changes but I am hoping you will accept this. I've changed the register definitions to be in the style preferred by the armlinux folks. Unfortunately, I changed this locally before consolidating the board config includes and improving the SDRAM configuration handling. So I can't really submit the latter changes seperately without many small incremental patches and large headaches on my end. I will do it if you insist since these changes are quite an improvement for these boards...but it may take a while. CHANGELOG * Patch by Paul Ruhland, 29 August 2004 - change register definitions to use the __REG style preferred by the arm linux community - add targets to Makefile for all card engine SDRAM configurations - add support for all SDRAM configurations in board config includes, 'sdram_init', and board config.mk - add CONFIG_LPD7A404 to 'ARM base boards' in toplevel README - add CPLD revision detection to handle hardware variations between card-engine revisions - consolidate existing board config includes into generic 'lpd7a40x-10.h' and 'lpd7a40x.h'... differences between boards are small enough not to warrent seperate files

2 1

[U-Boot-Users] Generating b-records for DragonBall i.MX
by Steven Scholz 10 Oct '04

10 Oct '04

Hi there, I just hacked a simple script that converts u-boot.bin into a text file containg processor init code, SynchFlash programming code and U-Boot data in form of so called b-records. This can be used to programm U-Boot into (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L 0AFE1F3410202E2E2E000000002073756363656564/ 0AFE1F44102E0A0000206661696C656420210A0000/ 0AFE100000 ... MX1ADS Sync-flash Programming Utility v0.5 2002/08/21 Source address (stored in 0x0AFE0000): 0x0A000000 Target address (stored in 0x0AFE0004): 0x0C000000 Size (stored in 0x0AFE0008): 0x0001A320 Press any key to start programming ... Erasing ... Blank checking ... Programming ... Verifying flash ... succeed. Programming finished. So no need for a BDI2000 anymore... ;-) This is working on my MX1ADS eval board. Hope this could be useful for someone. (Maybe we even want to include this into the tools directory.) Steven

3 2

[U-Boot-Users] [PATCH] Nios-II Support (7 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/MAINTAINERS u-boot-nios2/MAINTAINERS --- u-boot-2004-08-24/MAINTAINERS 2004-07-11 18:37:59.000000000 -0400 +++ u-boot-nios2/MAINTAINERS 2004-08-24 06:07:20.000000000 -0400 @@ -429,6 +429,18 @@ DK1C20 Nios-32 ######################################################################### +# Nios-II Systems: # +# # +# Maintainer Name, Email Address # +# Board CPU # +######################################################################### + +Scott McNutt <smcnutt(a)psyent.com> + + PCI5441 Nios-II + PK1C20 Nios-II + +######################################################################### # MicroBlaze Systems: # # # # Maintainer Name, Email Address # diff -Naurb u-boot-2004-08-24/MAKEALL u-boot-nios2/MAKEALL --- u-boot-2004-08-24/MAKEALL 2004-08-01 18:48:16.000000000 -0400 +++ u-boot-nios2/MAKEALL 2004-08-24 06:20:27.000000000 -0400 @@ -188,6 +188,12 @@ " ######################################################################### +## Nios-II Systems +######################################################################### + +LIST_nios2="PCI5441 PK1C20" + +######################################################################### ## MicroBlaze Systems ######################################################################### @@ -219,7 +225,7 @@ arm|SA|ARM7|ARM9|pxa|ixp| \ microblaze| \ mips| \ - nios| \ + nios|nios2| \ x86|I486) for target in `eval echo '$LIST_'${arg}` do diff -Naurb u-boot-2004-08-24/Makefile u-boot-nios2/Makefile --- u-boot-2004-08-24/Makefile 2004-08-04 17:56:49.000000000 -0400 +++ u-boot-nios2/Makefile 2004-08-24 06:01:57.000000000 -0400 @@ -72,6 +72,9 @@ ifeq ($(ARCH),nios) CROSS_COMPILE = nios-elf- endif +ifeq ($(ARCH),nios2) +CROSS_COMPILE = nios2-elf- +endif ifeq ($(ARCH),m68k) CROSS_COMPILE = m68k-elf- endif @@ -1443,6 +1446,15 @@ } @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv +######################################################################### +## Nios-II +######################################################################### + +PK1C20_config : unconfig + @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent + +PCI5441_config : unconfig + @./mkconfig PCI5441 nios2 nios2 pci5441 psyent #======================================================================== # MicroBlaze diff -Naurb u-boot-2004-08-24/nios2_config.mk u-boot-nios2/nios2_config.mk --- u-boot-2004-08-24/nios2_config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/nios2_config.mk 2004-08-24 05:56:44.000000000 -0400 @@ -0,0 +1,26 @@ +# +# (C) Copyright 2004 +# Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ +PLATFORM_CPPFLAGS += -ffixed-r15 diff -Naurb u-boot-2004-08-24/README u-boot-nios2/README --- u-boot-2004-08-24/README 2004-08-02 19:22:59.000000000 -0400 +++ u-boot-nios2/README 2004-08-24 06:24:52.000000000 -0400 @@ -139,6 +139,7 @@ - mpc8260 Files specific to Motorola MPC8260 CPUs - mpc85xx Files specific to Motorola MPC85xx CPUs - nios Files specific to Altera NIOS CPUs + - nios2 Files specific to Altera Nios-II CPUs - ppc4xx Files specific to IBM PowerPC 4xx CPUs - pxa Files specific to Intel XScale PXA CPUs - s3c44b0 Files specific to Samsung S3C44B0 CPUs @@ -244,6 +245,10 @@ ---------------------- CONFIG_MICROBLAZE + Nios-2 based CPUs: + ---------------------- + CONFIG_NIOS2 + - Board Type: Define exactly one of @@ -304,6 +309,11 @@ CONFIG_SUZAKU + Nios-2 based boards: + ------------------------ + + CONFIG_PCI5441 CONFIG_PK1C20 + - CPU Module Type: (if CONFIG_COGENT is defined) Define exactly one of diff -Naurb u-boot-2004-08-24/CREDITS u-boot-nios2/CREDITS --- u-boot-2004-08-24/CREDITS 2004-07-11 15:17:20.000000000 -0400 +++ u-boot-nios2/CREDITS 2004-08-24 06:06:07.000000000 -0400 @@ -286,7 +286,10 @@ N: Scott McNutt E: smcnutt(a)psyent.com -D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20) +D: Support for Altera Nios-32 CPU +D: Support for Altera Nios-II CPU +D: Support for Nios Cyclone Development Kit (DK-1C20) +W: http://www.psyent.com N: Rolf Offermanns E: rof(a)sysgo.de diff -Naurb u-boot-2004-08-24/examples/Makefile u-boot-nios2/examples/Makefile --- u-boot-2004-08-24/examples/Makefile 2004-07-10 17:45:58.000000000 -0400 +++ u-boot-nios2/examples/Makefile 2004-08-24 06:43:02.000000000 -0400 @@ -41,6 +41,10 @@ LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds endif +ifeq ($(ARCH),nios2) +LOAD_ADDR = 0x00800000 -L $(gcclibdir) -T nios2.lds +endif + ifeq ($(ARCH),m68k) LOAD_ADDR = 0x20000 -L $(clibdir) endif diff -Naurb u-boot-2004-08-24/examples/nios2.lds u-boot-nios2/examples/nios2.lds --- u-boot-2004-08-24/examples/nios2.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/examples/nios2.lds 2004-08-24 06:43:40.000000000 -0400 @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* CMD TABLE - uboot command sections + */ + __uboot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-2004-08-24/examples/stubs.c u-boot-nios2/examples/stubs.c --- u-boot-2004-08-24/examples/stubs.c 2004-07-10 19:48:42.000000000 -0400 +++ u-boot-nios2/examples/stubs.c 2004-08-24 06:46:53.000000000 -0400 @@ -82,6 +82,21 @@ " jmp %%g0\n" \ " nop \n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0"); +#elif defined(CONFIG_NIOS2) +/* + * r15 holds the pointer to the global_data, r8 is call-clobbered + */ +#define EXPORT_FUNC(x) \ + asm volatile ( \ +" .globl " #x "\n" \ +#x ":\n" \ +" movhi r8, %%hi(%0)\n" \ +" ori r8, r0, %%lo(%0)\n" \ +" add r8, r0, r15\n" \ +" ldw r8, 0(r8)\n" \ +" ldw r8, %1(r8)\n" \ +" jmp r8\n" \ + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r15"); #elif defined(CONFIG_M68K) /* * d7 holds the pointer to the global_data, a0 is a call-clobbered

2 1

[U-Boot-Users] [PATCH] Nios-II Support (6 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/lib_nios2/board.c u-boot-nios2/lib_nios2/board.c --- u-boot-2004-08-24/lib_nios2/board.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/board.c 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2003, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <devices.h> +#include <watchdog.h> +#include <net.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif + + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependend #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ + + +extern void malloc_bin_reloc (void); +typedef int (init_fnc_t) (void); + +/* + * Begin and End of memory area for malloc(), and current "brk" + */ +static ulong mem_malloc_start = 0; +static ulong mem_malloc_end = 0; +static ulong mem_malloc_brk = 0; + +/* + * The Malloc area is immediately below the monitor copy in RAM + */ +static void mem_malloc_init (void) +{ + mem_malloc_start = CFG_MALLOC_BASE; + mem_malloc_end = mem_malloc_start + CFG_MALLOC_LEN; + mem_malloc_brk = mem_malloc_start; + memset ((void *) mem_malloc_start, + 0, + mem_malloc_end - mem_malloc_start); +} + +void *sbrk (ptrdiff_t increment) +{ + ulong old = mem_malloc_brk; + ulong new = old + increment; + + if ((new < mem_malloc_start) || (new > mem_malloc_end)) { + return (NULL); + } + mem_malloc_brk = new; + return ((void *) old); +} + + +/************************************************************************ + * Initialization sequence * + ***********************************************************************/ + +init_fnc_t *init_sequence[] = { + +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, /* Call board-specific init code early.*/ +#endif + + env_init, + serial_init, + console_init_f, + display_options, + checkcpu, + checkboard, + NULL, /* Terminate this list */ +}; + + +/***********************************************************************/ +void board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + bd_t *bd; + init_fnc_t **init_fnc_ptr; + char *s, *e; + int i; + + /* Pointer is writable since we allocated a register for it. + * Nios treats CFG_GBL_DATA_OFFSET as an address. + */ + gd = (gd_t *)CFG_GBL_DATA_OFFSET; + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + memset( gd, 0, CFG_GBL_DATA_SIZE ); + + gd->bd = (bd_t *)(gd+1); /* At end of global data */ + gd->baudrate = CONFIG_BAUDRATE; + gd->cpu_clk = CONFIG_SYS_CLK_FREQ; + + bd = gd->bd; + bd->bi_memstart = CFG_SDRAM_BASE; + bd->bi_memsize = CFG_SDRAM_SIZE; + bd->bi_flashstart = CFG_FLASH_BASE; +#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE) + bd->bi_sramstart= CFG_SRAM_BASE; + bd->bi_sramsize = CFG_SRAM_SIZE; +#endif + bd->bi_baudrate = CONFIG_BAUDRATE; + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { + WATCHDOG_RESET (); + if ((*init_fnc_ptr) () != 0) { + hang (); + } + } + + WATCHDOG_RESET (); + bd->bi_flashsize = flash_init(); + + WATCHDOG_RESET (); + mem_malloc_init(); + malloc_bin_reloc(); + env_relocate(); + + bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); + s = getenv ("ethaddr"); + for (i = 0; i < 6; ++i) { + bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) s = (*e) ? e + 1 : e; + } + + WATCHDOG_RESET (); + devices_init(); + jumptable_init(); + console_init_r(); + + WATCHDOG_RESET (); + interrupt_init (); + + /* main_loop */ + for (;;) { + WATCHDOG_RESET (); + main_loop (); + } +} + + +/***********************************************************************/ + +void hang (void) +{ + disable_interrupts (); + puts("### ERROR ### Please reset board ###\n"); + for (;;); +} diff -Naurb u-boot-2004-08-24/lib_nios2/cache.S u-boot-nios2/lib_nios2/cache.S --- u-boot-2004-08-24/lib_nios2/cache.S 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/cache.S 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + + .text + + .global flush_dcache + +flush_dcache: + add r5, r5, r4 + movhi r8, %hi(CFG_DCACHELINE_SIZE) + ori r8, r8, %lo(CFG_DCACHELINE_SIZE) +0: flushd 0(r4) + add r4, r4, r8 + bltu r4, r5, 0b + ret + + + .global flush_icache + +flush_icache: + add r5, r5, r4 + movhi r8, %hi(CFG_ICACHELINE_SIZE) + ori r8, r8, %lo(CFG_ICACHELINE_SIZE) +1: flushi r4 + add r4, r4, r8 + bltu r4, r5, 1b + ret + + .global flush_cache + +flush_cache: + add r5, r5, r4 + mov r9, r4 + mov r10, r5 + + movhi r8, %hi(CFG_DCACHELINE_SIZE) + ori r8, r8, %lo(CFG_DCACHELINE_SIZE) +0: flushd 0(r4) + add r4, r4, r8 + bltu r4, r5, 0b + + mov r4, r9 + mov r5, r10 + movhi r8, %hi(CFG_ICACHELINE_SIZE) + ori r8, r8, %lo(CFG_ICACHELINE_SIZE) +1: flushi r4 + add r4, r4, r8 + bltu r4, r5, 1b + + sync + flushp + ret diff -Naurb u-boot-2004-08-24/lib_nios2/divmod.c u-boot-nios2/lib_nios2/divmod.c --- u-boot-2004-08-24/lib_nios2/divmod.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/divmod.c 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,101 @@ +/* + * This file is part of GNU CC. + * + * GNU CC is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation; either version 2, or (at your + * option) any later version. + * + * GNU CC is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with GNU CC; see the file COPYING. If not, write + * to the Free Software Foundation, 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + */ + + +#include "math.h" + +USItype udivmodsi4 (USItype num, USItype den, word_type modwanted) +{ + USItype bit = 1; + USItype res = 0; + + while (den < num && bit && !(den & (1L << 31))) { + den <<= 1; + bit <<= 1; + } + while (bit) { + if (num >= den) { + num -= den; + res |= bit; + } + bit >>= 1; + den >>= 1; + } + if (modwanted) + return num; + return res; +} + + +SItype __divsi3 (SItype a, SItype b) +{ + word_type neg = 0; + SItype res; + + if (a < 0) { + a = -a; + neg = !neg; + } + + if (b < 0) { + b = -b; + neg = !neg; + } + + res = udivmodsi4 (a, b, 0); + + if (neg) + res = -res; + + return res; +} + + +SItype __modsi3 (SItype a, SItype b) +{ + word_type neg = 0; + SItype res; + + if (a < 0) { + a = -a; + neg = 1; + } + + if (b < 0) + b = -b; + + res = udivmodsi4 (a, b, 1); + + if (neg) + res = -res; + + return res; +} + + +SItype __udivsi3 (SItype a, SItype b) +{ + return udivmodsi4 (a, b, 0); +} + + +SItype __umodsi3 (SItype a, SItype b) +{ + return udivmodsi4 (a, b, 1); +} diff -Naurb u-boot-2004-08-24/lib_nios2/Makefile u-boot-nios2/lib_nios2/Makefile --- u-boot-2004-08-24/lib_nios2/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/Makefile 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(ARCH).a + +AOBJS = cache.o + +COBJS = board.o divmod.o nios_linux.o mult.o time.o + +OBJS = $(AOBJS) $(COBJS) + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) + $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff -Naurb u-boot-2004-08-24/lib_nios2/math.h u-boot-nios2/lib_nios2/math.h --- u-boot-2004-08-24/lib_nios2/math.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/math.h 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,16 @@ +#define BITS_PER_UNIT 8 + +typedef int HItype __attribute__ ((mode (HI))); +typedef unsigned int UHItype __attribute__ ((mode (HI))); + +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); + +typedef int word_type __attribute__ ((mode (__word__))); + +struct SIstruct {HItype low, high;}; + +typedef union { + struct SIstruct s; + SItype ll; +} SIunion; diff -Naurb u-boot-2004-08-24/lib_nios2/mult.c u-boot-nios2/lib_nios2/mult.c --- u-boot-2004-08-24/lib_nios2/mult.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/mult.c 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,56 @@ +/* + * This file is part of GNU CC. + * + * GNU CC is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation; either version 2, or (at your + * option) any later version. + * + * GNU CC is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with GNU CC; see the file COPYING. If not, write + * to the Free Software Foundation, 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + */ + + +#include <common.h> + +#if !defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) + +#include "math.h" + +USItype __mulsi3 (USItype a, USItype b) +{ + USItype c = 0; + + while (a != 0) { + if (a & 1) + c += b; + a >>= 1; + b <<= 1; + } + + return c; +} + + +UHItype __mulhi3 (UHItype a, UHItype b) +{ + UHItype c = 0; + + while (a != 0) { + if (a & 1) + c += b; + a >>= 1; + b <<= 1; + } + + return c; +} + +#endif /*!defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) */ diff -Naurb u-boot-2004-08-24/lib_nios2/nios_linux.c u-boot-nios2/lib_nios2/nios_linux.c --- u-boot-2004-08-24/lib_nios2/nios_linux.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/nios_linux.c 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2003, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +/* TODO + */ +void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], + ulong addr, ulong *len_ptr, int verify) +{ +} diff -Naurb u-boot-2004-08-24/lib_nios2/time.c u-boot-nios2/lib_nios2/time.c --- u-boot-2004-08-24/lib_nios2/time.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/lib_nios2/time.c 2004-08-24 05:36:48.000000000 -0400 @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2003, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> + + +extern void dly_clks( unsigned long ticks ); + +void udelay(unsigned long usec) +{ + /* The Nios core doesn't have a timebase, so we do our + * best for now and call a low-level loop that counts + * cpu clocks. + */ + unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec; + WATCHDOG_RESET (); /* trigger watchdog if needed */ + dly_clks (cnt); +}

2 1

[U-Boot-Users] [PATCH] Nios-II Support (5 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/include/configs/PCI5441.h u-boot-nios2/include/configs/PCI5441.h --- u-boot-2004-08-24/include/configs/PCI5441.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/configs/PCI5441.h 2004-08-24 05:54:30.000000000 -0400 @@ -0,0 +1,155 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_PCI5441 1 /* PCI-5441 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#endif /* __CONFIG_H */ diff -Naurb u-boot-2004-08-24/include/configs/PK1C20.h u-boot-nios2/include/configs/PK1C20.h --- u-boot-2004-08-24/include/configs/PK1C20.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/configs/PK1C20.h 2004-08-24 05:54:10.000000000 -0400 @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_PK1C20 1 /* PK1C20 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00200000 /* 2 MByte */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- leds are, after all, + * board-specific, no? + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#endif /* __CONFIG_H */ diff -Naurb u-boot-2004-08-24/include/image.h u-boot-nios2/include/image.h --- u-boot-2004-08-24/include/image.h 2004-04-18 17:13:45.000000000 -0400 +++ u-boot-nios2/include/image.h 2004-08-24 07:16:51.000000000 -0400 @@ -67,6 +67,7 @@ #define IH_CPU_M68K 12 /* M68K */ #define IH_CPU_NIOS 13 /* Nios-32 */ #define IH_CPU_MICROBLAZE 14 /* MicroBlaze */ +#define IH_CPU_NIOS2 15 /* Nios-II */ /* * Image Types diff -Naurb u-boot-2004-08-24/include/nios2.h u-boot-nios2/include/nios2.h --- u-boot-2004-08-24/include/nios2.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/nios2.h 2004-08-24 05:49:58.000000000 -0400 @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __NIOS2_H__ +#define __NIOS2_H__ + +/*------------------------------------------------------------------------ + * Control registers -- use with wrctl() & rdctl() + *----------------------------------------------------------------------*/ +#define CTL_STATUS 0 /* Processor status reg */ +#define CTL_ESTATUS 1 /* Exception status reg */ +#define CTL_BSTATUS 2 /* Break status reg */ +#define CTL_IENABLE 3 /* Interrut enable reg */ +#define CTL_IPENDING 4 /* Interrut pending reg */ + +/*------------------------------------------------------------------------ + * Access to control regs + *----------------------------------------------------------------------*/ +#define _str_(x) #x + +#define rdctl(reg)\ + ({unsigned int val;\ + asm volatile( "rdctl %0, ctl" _str_(reg)\ + : "=r" (val) ); val;}) + +#define wrctl(reg,val)\ + asm volatile( "wrctl ctl" _str_(reg) ",%0"\ + : : "r" (val)) + +/*------------------------------------------------------------------------ + * Control reg bit masks + *----------------------------------------------------------------------*/ +#define STATUS_IE (1<<0) /* Interrupt enable */ +#define STATUS_U (1<<1) /* User-mode */ + +/*------------------------------------------------------------------------ + * Bit-31 Cache bypass -- only valid for data access. When data cache + * is not implemented, bit 31 is ignored for compatibility. + *----------------------------------------------------------------------*/ +#define CACHE_BYPASS(a) ((a) | 0x80000000) +#define CACHE_NO_BYPASS(a) ((a) & ~0x80000000) + +#endif /* __NIOS2_H__ */ diff -Naurb u-boot-2004-08-24/include/nios2-io.h u-boot-nios2/include/nios2-io.h --- u-boot-2004-08-24/include/nios2-io.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/nios2-io.h 2004-08-24 05:49:58.000000000 -0400 @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************* + * Altera Nios2 Standard Peripherals + ************************************************************************/ + +#ifndef __NIOS2IO_H__ +#define __NIOS2IO_H__ + +/*------------------------------------------------------------------------ + * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf) + *----------------------------------------------------------------------*/ +typedef volatile struct nios_uart_t { + unsigned rxdata; /* Rx data reg */ + unsigned txdata; /* Tx data reg */ + unsigned status; /* Status reg */ + unsigned control; /* Control reg */ + unsigned divisor; /* Baud rate divisor reg */ + unsigned endofpacket; /* End-of-packet reg */ +}nios_uart_t; + +/* status register */ +#define NIOS_UART_PE (1 << 0) /* parity error */ +#define NIOS_UART_FE (1 << 1) /* frame error */ +#define NIOS_UART_BRK (1 << 2) /* break detect */ +#define NIOS_UART_ROE (1 << 3) /* rx overrun */ +#define NIOS_UART_TOE (1 << 4) /* tx overrun */ +#define NIOS_UART_TMT (1 << 5) /* tx empty */ +#define NIOS_UART_TRDY (1 << 6) /* tx ready */ +#define NIOS_UART_RRDY (1 << 7) /* rx ready */ +#define NIOS_UART_E (1 << 8) /* exception */ +#define NIOS_UART_DCTS (1 << 10) /* cts change */ +#define NIOS_UART_CTS (1 << 11) /* cts */ +#define NIOS_UART_EOP (1 << 12) /* eop detected */ + +/* control register */ +#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/ +#define NIOS_UART_IFE (1 << 1) /* frame error int ena */ +#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */ +#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */ +#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */ +#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */ +#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */ +#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */ +#define NIOS_UART_IE (1 << 8) /* exception int ena */ +#define NIOS_UART_TBRK (1 << 9) /* transmit break */ +#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */ +#define NIOS_UART_RTS (1 << 11) /* rts */ +#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */ + + +/*------------------------------------------------------------------------ + * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf) + *----------------------------------------------------------------------*/ +typedef volatile struct nios_timer_t { + unsigned status; /* Timer status reg */ + unsigned control; /* Timer control reg */ + unsigned periodl; /* Timeout period low */ + unsigned periodh; /* Timeout period high */ + unsigned snapl; /* Snapshot low */ + unsigned snaph; /* Snapshot high */ +}nios_timer_t; + +/* status register */ +#define NIOS_TIMER_TO (1 << 0) /* Timeout */ +#define NIOS_TIMER_RUN (1 << 1) /* Timer running */ + +/* control register */ +#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */ +#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */ +#define NIOS_TIMER_START (1 << 2) /* Start timer */ +#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */ + + +/*------------------------------------------------------------------------ + * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf) + *----------------------------------------------------------------------*/ +typedef volatile struct nios_pio_t { + unsigned int data; /* Data value at each PIO in/out */ + unsigned int direction; /* Data direct. for each PIO bit */ + unsigned int interruptmask; /* Per-bit IRQ enable/disable */ + unsigned int edgecapture; /* Per-bit sync. edge detect & hold */ +}nios_pio_t; + +/* direction register */ +#define NIOS_PIO_OUT (1) /* PIO bit is output */ +#define NIOS_PIO_IN (0) /* PIO bit is input */ + + +/*------------------------------------------------------------------------ + * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf) + *----------------------------------------------------------------------*/ +typedef volatile struct nios_spi_t { + unsigned rxdata; /* Rx data reg */ + unsigned txdata; /* Tx data reg */ + unsigned status; /* Status reg */ + unsigned control; /* Control reg */ + unsigned reserved; /* (master only) */ + unsigned slaveselect; /* SPI slave select mask (master only) */ +}nios_spi_t; + +/* status register */ +#define NIOS_SPI_ROE (1 << 3) /* rx overrun */ +#define NIOS_SPI_TOE (1 << 4) /* tx overrun */ +#define NIOS_SPI_TMT (1 << 5) /* tx empty */ +#define NIOS_SPI_TRDY (1 << 6) /* tx ready */ +#define NIOS_SPI_RRDY (1 << 7) /* rx ready */ +#define NIOS_SPI_E (1 << 8) /* exception */ + +/* control register */ +#define NIOS_SPI_IROE (1 << 3) /* rx overrun int ena */ +#define NIOS_SPI_ITOE (1 << 4) /* tx overrun int ena */ +#define NIOS_SPI_ITRDY (1 << 6) /* tx ready int ena */ +#define NIOS_SPI_IRRDY (1 << 7) /* rx ready int ena */ +#define NIOS_SPI_IE (1 << 8) /* exception int ena */ +#define NIOS_SPI_SSO (1 << 10) /* override SS_n output */ + +/*------------------------------------------------------------------------ + * ASMI + *----------------------------------------------------------------------*/ +typedef volatile struct nios_asmi_t { + unsigned rxdata; /* Rx data reg */ + unsigned txdata; /* Tx data reg */ + unsigned status; /* Status reg */ + unsigned control; /* Control reg */ + unsigned reserved; + unsigned slavesel; /* Slave select */ + unsigned endofpacket; /* End-of-packet reg */ +}nios_asmi_t; + +/* status register */ +#define NIOS_ASMI_ROE (1 << 3) /* rx overrun */ +#define NIOS_ASMI_TOE (1 << 4) /* tx overrun */ +#define NIOS_ASMI_TMT (1 << 5) /* tx empty */ +#define NIOS_ASMI_TRDY (1 << 6) /* tx ready */ +#define NIOS_ASMI_RRDY (1 << 7) /* rx ready */ +#define NIOS_ASMI_E (1 << 8) /* exception */ +#define NIOS_ASMI_EOP (1 << 9) /* eop detected */ + +/* control register */ +#define NIOS_ASMI_IROE (1 << 3) /* rx overrun int ena */ +#define NIOS_ASMI_ITOE (1 << 4) /* tx overrun int ena */ +#define NIOS_ASMI_ITRDY (1 << 6) /* tx ready int ena */ +#define NIOS_ASMI_IRRDY (1 << 7) /* rx ready int ena */ +#define NIOS_ASMI_IE (1 << 8) /* exception int ena */ +#define NIOS_ASMI_IEOP (1 << 9) /* rx eop int ena */ +#define NIOS_ASMI_SSO (1 << 10) /* slave select enable */ + +/*------------------------------------------------------------------------ + * JTAG UART + *----------------------------------------------------------------------*/ +typedef volatile struct nios_jtag_t { + unsigned data; /* Data register */ + unsigned control; /* Control register */ +}nios_jtag_t; + +/* data register */ +#define NIOS_JTAG_RVALID (1<<15) /* Read valid */ +#define NIOS_JTAG_DATA(d) ((d)&0x0ff) /* Read data */ +#define NIOS_JTAG_RAVAIL(d) ((d)>>16) /* Read space avail */ + +/* control register */ +#define NIOS_JTAG_RE (1 << 0) /* read intr enable */ +#define NIOS_JTAG_WE (1 << 1) /* write intr enable */ +#define NIOS_JTAG_RI (1 << 8) /* read intr pending */ +#define NIOS_JTAG_WI (1 << 9) /* write intr pending*/ +#define NIOS_JTAG_AC (1 << 10) /* activity indicator */ +#define NIOS_JTAG_RRDY (1 << 12) /* read available */ +#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */ + +/*------------------------------------------------------------------------ + * SYSTEM ID + *----------------------------------------------------------------------*/ +typedef volatile struct nios_sysid_t { + unsigned id; /* The system build id*/ + unsigned timestamp; /* Timestamp */ +}nios_sysid_t; + +#endif /* __NIOS2IO_H__ */ diff -Naurb u-boot-2004-08-24/include/status_led.h u-boot-nios2/include/status_led.h --- u-boot-2004-08-24/include/status_led.h 2004-07-10 18:36:00.000000000 -0400 +++ u-boot-nios2/include/status_led.h 2004-08-24 07:18:07.000000000 -0400 @@ -340,6 +340,9 @@ #elif defined(CONFIG_WRSBC8240) /* XXX empty just to avoid the error */ /************************************************************************/ +#elif defined(CONFIG_NIOS2) +/* XXX empty just to avoid the error */ +/************************************************************************/ #else # error Status LED configuration missing #endif

2 1

[U-Boot-Users] [PATCH] Nios-II Support (4 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/include/asm-nios2/bitops.h u-boot-nios2/include/asm-nios2/bitops.h --- u-boot-2004-08-24/include/asm-nios2/bitops.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/bitops.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_BITOPS_H_ +#define __ASM_NIOS2_BITOPS_H_ + + +extern void set_bit(int nr, volatile void * a); +extern void clear_bit(int nr, volatile void * a); +extern int test_and_clear_bit(int nr, volatile void * a); +extern void change_bit(unsigned long nr, volatile void *addr); +extern int test_and_set_bit(int nr, volatile void * a); +extern int test_and_change_bit(int nr, volatile void * addr); +extern int test_bit(int nr, volatile void * a); +extern int ffs(int i); + +#endif /* __ASM_NIOS2_BITOPS_H */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/byteorder.h u-boot-nios2/include/asm-nios2/byteorder.h --- u-boot-2004-08-24/include/asm-nios2/byteorder.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/byteorder.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,30 @@ +/* +* (C) Copyright 2004, Psyent Corporation <www.psyent.com> +* Scott McNutt <smcnutt(a)psyent.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __ASM_NIOS2_BYTEORDER_H_ +#define __ASM_NIOS2_BYTEORDER_H_ + +#include <asm/types.h> +#include <linux/byteorder/little_endian.h> + +#endif /* __ASM_NIOS2_BYTEORDER_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/cache.h u-boot-nios2/include/asm-nios2/cache.h --- u-boot-2004-08-24/include/asm-nios2/cache.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/cache.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_CACHE_H_ +#define __ASM_NIOS2_CACHE_H_ + +extern void flush_dcache (unsigned long start, unsigned long size); +extern void flush_icache (unsigned long start, unsigned long size); + +#endif /* __ASM_NIOS2_CACHE_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/global_data.h u-boot-nios2/include/asm-nios2/global_data.h --- u-boot-2004-08-24/include/asm-nios2/global_data.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/global_data.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_NIOS2_GLOBALDATA_H_ +#define __ASM_NIOS2_GLOBALDATA_H_ + +typedef struct global_data { + bd_t *bd; + unsigned long flags; + unsigned long baudrate; + unsigned long cpu_clk; /* CPU clock in Hz! */ + unsigned long have_console; /* serial_init() was called */ + unsigned long ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid */ +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) + unsigned long post_log_word; /* Record POST activities */ + unsigned long post_init_f_time; /* When post_init_f started */ +#endif + void **jt; /* Standalone app jump table */ +} gd_t; + +/* flags */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ + +#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r15") + +#endif /* __ASM_NIOS2_GLOBALDATA_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/io.h u-boot-nios2/include/asm-nios2/io.h --- u-boot-2004-08-24/include/asm-nios2/io.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/io.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_IO_H_ +#define __ASM_NIOS2_IO_H_ + +#define sync() asm volatile ("sync" : : : "memory"); + +extern unsigned char inb (unsigned char *port); +extern unsigned short inw (unsigned short *port); +extern unsigned inl (unsigned port); +extern void outb (unsigned char val, unsigned char *port); +extern void outw (unsigned short val, unsigned short *port); +extern void outl (unsigned val, unsigned port); + +#endif /* __ASM_NIOS2_IO_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/opcodes.h u-boot-nios2/include/asm-nios2/opcodes.h --- u-boot-2004-08-24/include/asm-nios2/opcodes.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/opcodes.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_OPCODES_H_ +#define __ASM_NIOS2_OPCODES_H_ + +#define OPCODE_OP(inst) ((inst) & 0x3f) +#define OPCODE_OPX(inst) (((inst)>>11) & 0x3f) +#define OPCODE_RA(inst) (((inst)>>27) & 01f) +#define OPCODE_RB(inst) (((inst)>>22) & 01f) +#define OPCODE_RC(inst) (((inst)>>17) & 01f) + +/* I-TYPE (immediate) and J-TYPE (jump) opcodes + */ +#define OPCODE_CALL 0x00 +#define OPCODE_LDBU 0x03 +#define OPCODE_ADDI 0x04 +#define OPCODE_STB 0x05 +#define OPCODE_BR 0x06 +#define OPCODE_LDB 0x07 +#define OPCODE_CMPGEI 0x08 +#define OPCODE_LDHU 0x0B +#define OPCODE_ANDI 0x0C +#define OPCODE_STH 0x0D +#define OPCODE_BGE 0x0E +#define OPCODE_LDH 0x0F +#define OPCODE_CMPLTI 0x10 +#define OPCODE_XORI 0x1C +#define OPCODE_ORI 0x14 +#define OPCODE_STW 0x15 +#define OPCODE_BLT 0x16 +#define OPCODE_LDW 0x17 +#define OPCODE_CMPNEI 0x18 +#define OPCODE_BNE 0x1E +#define OPCODE_CMPEQI 0x20 +#define OPCODE_LDBUIO 0x23 +#define OPCODE_MULI 0x24 +#define OPCODE_STBIO 0x25 +#define OPCODE_BEQ 0x26 +#define OPCODE_LDBIO 0x27 +#define OPCODE_CMPGEUI 0x28 +#define OPCODE_ANDHI 0x2C +#define OPCODE_STHIO 0x2D +#define OPCODE_BGEU 0x2E +#define OPCODE_LDHIO 0x2F +#define OPCODE_CMPLTUI 0x30 +#define OPCODE_CUSTOM 0x32 +#define OPCODE_INITD 0x33 +#define OPCODE_ORHI 0x34 +#define OPCODE_STWIO 0x35 +#define OPCODE_BLTU 0x36 +#define OPCODE_LDWIO 0x37 +#define OPCODE_RTYPE 0x3A +#define OPCODE_LDHUIO 0x2B +#define OPCODE_FLUSHD 0x3B +#define OPCODE_XORHI 0x3C + +/* R-Type (register) OPX field encodings + */ +#define OPCODE_ERET 0x01 +#define OPCODE_ROLI 0x02 +#define OPCODE_ROL 0x03 +#define OPCODE_FLUSHP 0x04 +#define OPCODE_RET 0x05 +#define OPCODE_NOR 0x06 +#define OPCODE_MULXUU 0x07 +#define OPCODE_CMPGE 0x08 +#define OPCODE_BRET 0x09 +#define OPCODE_ROR 0x0B +#define OPCODE_FLUSHI 0x0C +#define OPCODE_JMP 0x0D +#define OPCODE_AND 0x0E + +#define OPCODE_CMPLT 0x10 +#define OPCODE_SLLI 0x12 +#define OPCODE_SLL 0x13 +#define OPCODE_OR 0x16 +#define OPCODE_MULXSU 0x17 +#define OPCODE_CMPNE 0x18 +#define OPCODE_SRLI 0x1A +#define OPCODE_SRL 0x1B +#define OPCODE_NEXTPC 0x1C +#define OPCODE_CALLR 0x1D +#define OPCODE_XOR 0x1E +#define OPCODE_MULXSS 0x1F + +#define OPCODE_CMPEQ 0x20 +#define OPCODE_CMPLTU 0x30 +#define OPCODE_ADD 0x31 +#define OPCODE_DIVU 0x24 +#define OPCODE_DIV 0x25 +#define OPCODE_RDCTL 0x26 +#define OPCODE_MUL 0x27 +#define OPCODE_CMPGEU 0x28 +#define OPCODE_TRAP 0x2D +#define OPCODE_WRCTL 0x2E + +#define OPCODE_BREAK 0x34 +#define OPCODE_SYNC 0x36 +#define OPCODE_INITI 0x29 +#define OPCODE_SUB 0x39 +#define OPCODE_SRAI 0x3A +#define OPCODE_SRA 0x3B + +/*Full instruction encodings for R-Type, without the R's ;-) + * + * TODO: BREAK, BRET, ERET, RET, SYNC (as needed) + */ +#define OPC_TRAP 0x003b683a + +#endif /* __ASM_NIOS2_OPCODES_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/posix_types.h u-boot-nios2/include/asm-nios2/posix_types.h --- u-boot-2004-08-24/include/asm-nios2/posix_types.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/posix_types.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,63 @@ +#ifndef __ASM_NIOS2_POSIX_TYPES_H_ +#define __ASM_NIOS2_POSIX_TYPES_H_ + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_NIOS2_POSIX_TYPES_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/processor.h u-boot-nios2/include/asm-nios2/processor.h --- u-boot-2004-08-24/include/asm-nios2/processor.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/processor.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_PROCESSOR_H_ +#define __ASM_NIOS2_PROCESSOR_H_ +#endif /* __ASM_NIOS2_PROCESSOR_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/psr.h u-boot-nios2/include/asm-nios2/psr.h --- u-boot-2004-08-24/include/asm-nios2/psr.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/psr.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_PSR_H_ +#define __ASM_NIOS2_PSR_H_ + + +#endif /* __ASM_NIOS2_PSR_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/ptrace.h u-boot-nios2/include/asm-nios2/ptrace.h --- u-boot-2004-08-24/include/asm-nios2/ptrace.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/ptrace.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_PTRACE_H_ +#define __ASM_NIOS2_PTRACE_H_ + +struct pt_regs { + unsigned reg[32]; + unsigned status; +}; + + +#endif /* __ASM_NIOS2_PTRACE_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/status_led.h u-boot-nios2/include/asm-nios2/status_led.h --- u-boot-2004-08-24/include/asm-nios2/status_led.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/status_led.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_STATUS_LED_H__ +#define __ASM_STATUS_LED_H__ + +typedef unsigned led_id_t; +extern void __led_init (led_id_t mask, int state); +extern void __led_set (led_id_t mask, int state); +inline void __led_toggle (led_id_t mask); + +#endif /* __ASM_STATUS_LED_H__ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/string.h u-boot-nios2/include/asm-nios2/string.h --- u-boot-2004-08-24/include/asm-nios2/string.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/string.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_NIOS2_STRING_H_ +#define __ASM_NIOS2_STRING_H_ + +#undef __HAVE_ARCH_STRRCHR +extern char * strrchr(const char * s, int c); + +#undef __HAVE_ARCH_STRCHR +extern char * strchr(const char * s, int c); + +#undef __HAVE_ARCH_MEMCPY +extern void * memcpy(void *, const void *, __kernel_size_t); + +#undef __HAVE_ARCH_MEMMOVE +extern void * memmove(void *, const void *, __kernel_size_t); + +#undef __HAVE_ARCH_MEMCHR +extern void * memchr(const void *, int, __kernel_size_t); + +#undef __HAVE_ARCH_MEMSET +extern void * memset(void *, int, __kernel_size_t); + +#undef __HAVE_ARCH_MEMZERO +extern void memzero(void *ptr, __kernel_size_t n); + +#endif /* __ASM_NIOS2_STRING_H_ */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/system.h u-boot-nios2/include/asm-nios2/system.h --- u-boot-2004-08-24/include/asm-nios2/system.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/system.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_NIOS2_SYSTEM_H_ +#define __ASM_NIOS2_SYSTEM_H_ + +#endif /* __ASM_NIOS2_SYSTEM_H */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/types.h u-boot-nios2/include/asm-nios2/types.h --- u-boot-2004-08-24/include/asm-nios2/types.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/types.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,57 @@ +#ifndef __ASM_NIOS2_TYPES_H_ +#define __ASM_NIOS2_TYPES_H_ + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +#endif /* __KERNEL__ */ + +#endif /* __ASM_NIOS2_TYPES_H */ diff -Naurb u-boot-2004-08-24/include/asm-nios2/u-boot.h u-boot-nios2/include/asm-nios2/u-boot.h --- u-boot-2004-08-24/include/asm-nios2/u-boot.h 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/include/asm-nios2/u-boot.h 2004-08-24 05:48:28.000000000 -0400 @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_U_BOOT_H_ +#define __ASM_NIOS2_U_BOOT_H_ + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned long bi_baudrate; /* Console Baudrate */ +} bd_t; + + +#endif /* __ASM_NIOS2_U_BOOT_H_ */

2 1

[U-Boot-Users] [PATCH] Nios-II Support (3 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/cpu/nios2/config.mk u-boot-nios2/cpu/nios2/config.mk --- u-boot-2004-08-24/cpu/nios2/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/config.mk 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += diff -Naurb u-boot-2004-08-24/cpu/nios2/cpu.c u-boot-nios2/cpu/nios2/cpu.c --- u-boot-2004-08-24/cpu/nios2/cpu.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/cpu.c 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <nios2.h> +#include <nios2-io.h> + +#if defined (CFG_NIOS_SYSID_BASE) +#include <linux/time.h> +static void check_sysid (void) +{ + struct nios_sysid_t *sysid = + (struct nios_sysid_t *)CACHE_BYPASS(CFG_NIOS_SYSID_BASE); + struct tm t; + char asc[32]; + + localtime_r ((time_t *)&sysid->timestamp, &t); + asctime_r (&t, asc); + printf ("SYSID : %08x, %s", sysid->id, asc); + +} +#endif /* CFG_NIOS_SYSID_BASE */ + +int checkcpu (void) +{ + printf ("CPU : Nios-II\n"); +#if !defined(CFG_NIOS_SYSID_BASE) + printf ("SYSID : <unknown>\n"); +#else + check_sysid (); +#endif + return (0); +} + + +int do_reset (void) +{ + void (*rst)(void) = (void(*)(void))CFG_RESET_ADDR; + disable_interrupts (); + rst(); + return(0); +} diff -Naurb u-boot-2004-08-24/cpu/nios2/exceptions.S u-boot-nios2/cpu/nios2/exceptions.S --- u-boot-2004-08-24/cpu/nios2/exceptions.S 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/exceptions.S 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/opcodes.h> + + + .text + .align 4 + + .global _exception + +_exception: + /* SAVE ALL REGS -- this allows trap and unimplemented + * instruction handlers to be coded conveniently in C + */ + addi sp, sp, -(33*4) + stw r0, 0(sp) + stw r1, 4(sp) + stw r2, 8(sp) + stw r3, 12(sp) + stw r4, 16(sp) + stw r5, 20(sp) + stw r6, 24(sp) + stw r7, 28(sp) + stw r8, 32(sp) + stw r9, 36(sp) + stw r10, 40(sp) + stw r11, 44(sp) + stw r12, 48(sp) + stw r13, 52(sp) + stw r14, 56(sp) + stw r15, 60(sp) + stw r16, 64(sp) + stw r17, 68(sp) + stw r19, 72(sp) + stw r19, 76(sp) + stw r20, 80(sp) + stw r21, 84(sp) + stw r22, 88(sp) + stw r23, 92(sp) + stw r24, 96(sp) + stw r25, 100(sp) + stw r26, 104(sp) + stw r27, 108(sp) + stw r28, 112(sp) + stw r29, 116(sp) + stw r30, 120(sp) + stw r31, 124(sp) + rdctl et, estatus + stw et, 128(sp) + + /* If interrupts are disabled -- software interrupt */ + rdctl et, estatus + andi et, et, 1 + beq et, r0, 0f + + /* If no interrupts are pending -- software interrupt */ + rdctl et, ipending + beq et, r0, 0f + + /* HARDWARE INTERRUPT: Call interrupt handler */ + movhi r3, %hi(external_interrupt) + ori r3, r3, %lo(external_interrupt) + mov r4, sp /* ptr to regs */ + callr r3 + + /* Return address fixup: execution resumes by re-issue of + * interrupted instruction at ea-4 (ea == r29). Here we do + * simple fixup to allow common exception return. + */ + ldw r3, 116(sp) + addi r3, r3, -4 + stw r3, 116(sp) + br _exception_return + +0: + /* TRAP EXCEPTION */ + movhi r3, %hi(OPC_TRAP) + ori r3, r3, %lo(OPC_TRAP) + addi r1, ea, -4 + ldw r1, 0(r1) + bne r1, r3, 1f + movhi r3, %hi(trap_handler) + ori r3, r3, %lo(trap_handler) + mov r4, sp /* ptr to regs */ + callr r3 + br _exception_return + +1: + /* UNIMPLEMENTED INSTRUCTION EXCEPTION */ + movhi r3, %hi(soft_emulation) + ori r3, r3, %lo(soft_emulation) + mov r4, sp /* ptr to regs */ + callr r3 + + /* Restore regsisters and return from exception*/ +_exception_return: + ldw r1, 4(sp) + ldw r2, 8(sp) + ldw r3, 12(sp) + ldw r4, 16(sp) + ldw r5, 20(sp) + ldw r6, 24(sp) + ldw r7, 28(sp) + ldw r8, 32(sp) + ldw r9, 36(sp) + ldw r10, 40(sp) + ldw r11, 44(sp) + ldw r12, 48(sp) + ldw r13, 52(sp) + ldw r14, 56(sp) + ldw r15, 60(sp) + ldw r16, 64(sp) + ldw r17, 68(sp) + ldw r19, 72(sp) + ldw r19, 76(sp) + ldw r20, 80(sp) + ldw r21, 84(sp) + ldw r22, 88(sp) + ldw r23, 92(sp) + ldw r24, 96(sp) + ldw r25, 100(sp) + ldw r26, 104(sp) + ldw r27, 108(sp) + ldw r28, 112(sp) + ldw r29, 116(sp) + ldw r30, 120(sp) + ldw r31, 124(sp) + addi sp, sp, (33*4) + eret +/*-------------------------------------------------------------*/ diff -Naurb u-boot-2004-08-24/cpu/nios2/interrupts.c u-boot-nios2/cpu/nios2/interrupts.c --- u-boot-2004-08-24/cpu/nios2/interrupts.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/interrupts.c 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,229 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <nios2.h> +#include <nios2-io.h> +#include <asm/ptrace.h> +#include <common.h> +#include <command.h> +#include <watchdog.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif + +#if defined(CFG_NIOS_TMRBASE) && !defined(CFG_NIOS_TMRIRQ) +#error CFG_NIOS_TMRIRQ not defined (see documentation) +#endif + +/****************************************************************************/ + +struct irq_action { + interrupt_handler_t *handler; + void *arg; + int count; +}; + +static struct irq_action vecs[32]; + +/*************************************************************************/ +volatile ulong timestamp = 0; + +void reset_timer (void) +{ + timestamp = 0; +} + +ulong get_timer (ulong base) +{ + WATCHDOG_RESET (); + return (timestamp - base); +} + +void set_timer (ulong t) +{ + timestamp = t; +} + + +/* The board must handle this interrupt if a timer is not + * provided. + */ +#if defined(CFG_NIOS_TMRBASE) +void tmr_isr (void *arg) +{ + nios_timer_t *tmr = (nios_timer_t *)arg; + /* Interrupt is cleared by writing anything to the + * status register. + */ + tmr->status = 0; + timestamp += CFG_NIOS_TMRMS; +#ifdef CONFIG_STATUS_LED + status_led_tick(timestamp); +#endif +} + +static void tmr_init (void) +{ + nios_timer_t *tmr =(nios_timer_t *)CACHE_BYPASS(CFG_NIOS_TMRBASE); + + tmr->control &= ~(NIOS_TIMER_START | NIOS_TIMER_ITO); + tmr->control |= NIOS_TIMER_STOP; +#if defined(CFG_NIOS_TMRCNT) + tmr->periodl = CFG_NIOS_TMRCNT & 0xffff; + tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff; +#endif + tmr->control |= ( NIOS_TIMER_ITO | + NIOS_TIMER_CONT | + NIOS_TIMER_START ); + irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr); +} + +#endif /* CFG_NIOS_TMRBASE */ + +/*************************************************************************/ +int disable_interrupts (void) +{ + int val = rdctl (CTL_STATUS); + wrctl (CTL_STATUS, val & ~STATUS_IE); + return (val & STATUS_IE); +} + +void enable_interrupts( void ) +{ + int val = rdctl (CTL_STATUS); + wrctl (CTL_STATUS, val | STATUS_IE); +} + +void external_interrupt (struct pt_regs *regs) +{ + unsigned irqs; + struct irq_action *act; + + /* Evaluate only irqs that are both enabled AND pending */ + irqs = rdctl (CTL_IENABLE) & rdctl (CTL_IPENDING); + act = vecs; + + /* Assume (as does the Nios2 HAL) that bit 0 is highest + * priority. NOTE: There is ALWAYS a handler assigned + * (the default if no other). + */ + while (irqs) { + if (irqs & 1) { + act->handler (act->arg); + act->count++; + } + irqs >>=1; + act++; + } +} + +static void def_hdlr (void *arg) +{ + unsigned irqs = rdctl (CTL_IENABLE); + + /* Disable the individual interrupt -- with gratuitous + * warning. + */ + irqs &= ~(1 << (int)arg); + wrctl (CTL_IENABLE, irqs); + printf ("WARNING: Disabling unhandled interrupt: %d\n", + (int)arg); +} + +/*************************************************************************/ +void irq_install_handler (int irq, interrupt_handler_t *hdlr, void *arg) +{ + + int flag; + struct irq_action *act; + unsigned ena = rdctl (CTL_IENABLE); + + if ((irq < 0) || (irq > 31)) + return; + act = &vecs[irq]; + + flag = disable_interrupts (); + if (hdlr) { + act->handler = hdlr; + act->arg = arg; + ena |= (1 << irq); /* enable */ + } else { + act->handler = def_hdlr; + act->arg = (void *)irq; + ena &= ~(1 << irq); /* disable */ + } + wrctl (CTL_IENABLE, ena); + if (flag) enable_interrupts (); +} + + +int interrupt_init (void) +{ + int i; + + /* Assign the default handler to all */ + for (i = 0; i < 32; i++) { + vecs[i].handler = def_hdlr; + vecs[i].arg = (void *)i; + vecs[i].count = 0; + } + +#if defined(CFG_NIOS_TMRBASE) + tmr_init (); +#endif + + enable_interrupts (); + return (0); +} + + +/*************************************************************************/ +#if (CONFIG_COMMANDS & CFG_CMD_IRQ) +int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + struct irq_action *act = vecs; + + printf ("\nInterrupt-Information:\n\n"); + printf ("Nr Routine Arg Count\n"); + printf ("-----------------------------\n"); + + for (i=0; i<32; i++) { + if (act->handler != def_hdlr) { + printf ("%02d %08lx %08lx %d\n", + i, + (ulong)act->handler, + (ulong)act->arg, + act->count); + } + act++; + } + printf ("\n"); + + return (0); +} +#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */ diff -Naurb u-boot-2004-08-24/cpu/nios2/Makefile u-boot-nios2/cpu/nios2/Makefile --- u-boot-2004-08-24/cpu/nios2/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/Makefile 2004-08-24 05:40:54.000000000 -0400 @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.o +AOBJS = exceptions.o +OBJS = cpu.o interrupts.o serial.o traps.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) $(AOBJS) + $(AR) crv $@ $(OBJS) $(AOBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@ + +sinclude .depend + +######################################################################### diff -Naurb u-boot-2004-08-24/cpu/nios2/serial.c u-boot-nios2/cpu/nios2/serial.c --- u-boot-2004-08-24/cpu/nios2/serial.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/serial.c 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <watchdog.h> +#include <nios2.h> +#include <nios2-io.h> + +/*------------------------------------------------------------------ + * JTAG acts as the serial port + *-----------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) + +static nios_jtag_t *jtag = + (nios_jtag_t *)CACHE_BYPASS(CFG_NIOS_CONSOLE); + +void serial_setbrg( void ){ return; } +int serial_init( void ) { return(0);} + +void serial_putc (char c) +{ + unsigned val; + + while (NIOS_JTAG_WSPACE (jtag->control) == 0) + WATCHDOG_RESET (); + jtag->data = (unsigned char)c; +} + +void serial_puts (const char *s) +{ + while (*s != 0) + serial_putc (*s++); +} + +int serial_tstc (void) +{ + return (jtag->control & NIOS_JTAG_RRDY); +} + +int serial_getc (void) +{ + int c; + unsigned val; + + while (1) { + WATCHDOG_RESET (); + val = jtag->data; + if (val & NIOS_JTAG_RVALID) + break; + } + c = val & 0x0ff; + return (c); +} + +/*------------------------------------------------------------------ + * UART the serial port + *-----------------------------------------------------------------*/ +#else + +static nios_uart_t *uart = (nios_uart_t *) + CACHE_BYPASS(CFG_NIOS_CONSOLE); + +#if defined(CFG_NIOS_FIXEDBAUD) + +/* Everything's already setup for fixed-baud PTF + * assignment + */ +void serial_setbrg (void){ return; } +int serial_init (void) { return (0);} + +#else + +void serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned div; + + div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1; + uart->divisor = div; + return; +} + +int serial_init (void) +{ + serial_setbrg (); + return (0); +} + +#endif /* CFG_NIOS_FIXEDBAUD */ + + +/*----------------------------------------------------------------------- + * UART CONSOLE + *---------------------------------------------------------------------*/ +void serial_putc (char c) +{ + if (c == '\n') + serial_putc ('\r'); + while ((uart->status & NIOS_UART_TRDY) == 0) + WATCHDOG_RESET (); + uart->txdata = (unsigned char)c; +} + +void serial_puts (const char *s) +{ + while (*s != 0) { + serial_putc (*s++); + } +} + +int serial_tstc (void) +{ + return (uart->status & NIOS_UART_RRDY); +} + +int serial_getc (void) +{ + while (serial_tstc () == 0) + WATCHDOG_RESET (); + return( uart->rxdata & 0x00ff ); +} + +#endif /* CONFIG_JTAG_CONSOLE */ diff -Naurb u-boot-2004-08-24/cpu/nios2/start.S u-boot-nios2/cpu/nios2/start.S --- u-boot-2004-08-24/cpu/nios2/start.S 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/start.S 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,212 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> + +/************************************************************************* + * RESTART + ************************************************************************/ + + .text + .global _start + +_start: + /* ICACHE INIT -- only the icache line at the reset address + * is invalidated at reset. So the init must stay within + * the cache line size (8 words). If GERMS is used, we'll + * just be invalidating the cache a second time. If cache + * is not implemented initi behaves as nop. + */ + movhi r4, %hi(CFG_ICACHELINE_SIZE) + ori r4, r4, %lo(CFG_ICACHELINE_SIZE) + movhi r5, %hi(CFG_ICACHE_SIZE) + ori r5, r5, %lo(CFG_ICACHE_SIZE) + mov r6, r0 +0: initi r6 + add r6, r6, r4 + bltu r6, r5, 0b + + /* INTERRUPTS -- for now, all interrupts masked and globally + * disabled. + */ + wrctl status, r0 /* Disable interrupts */ + wrctl ienable, r0 /* All disabled */ + + /* DCACHE INIT -- if dcache not implemented, initd behaves as + * nop. + */ + movhi r4, %hi(CFG_DCACHELINE_SIZE) + ori r4, r4, %lo(CFG_DCACHELINE_SIZE) + movhi r5, %hi(CFG_DCACHE_SIZE) + ori r5, r5, %lo(CFG_DCACHE_SIZE) + mov r6, r0 +1: initd 0(r6) + add r6, r6, r4 + bltu r6, r5, 1b + + /* RELOCATE CODE, DATA & COMMAND TABLE -- the following code + * assumes code, data and the command table are all + * contiguous. This lets us relocate everything as a single + * block. Make sure the linker script matches this ;-) + */ + nextpc r4 +_cur: movhi r5, %hi(_cur - _start) + ori r5, r5, %lo(_cur - _start) + sub r4, r4, r5 /* r4 <- cur _start */ + mov r8, r4 + movhi r5, %hi(_start) + ori r5, r5, %lo(_start) /* r5 <- linked _start */ + beq r4, r5, 3f + + movhi r6, %hi(_edata) + ori r6, r6, %lo(_edata) +2: ldwio r7, 0(r4) + addi r4, r4, 4 + stwio r7, 0(r5) + addi r5, r5, 4 + bne r5, r6, 2b +3: + + /* ZERO BSS/SBSS -- bss and sbss are assumed to be adjacent + * and between __bss_start and _end. + */ + movhi r5, %hi(__bss_start) + ori r5, r5, %lo(__bss_start) + movhi r6, %hi(_end) + ori r6, r6, %lo(_end) + beq r5, r6, 5f + +4: stwio r0, 0(r5) + addi r5, r5, 4 + bne r5, r6, 4b +5: + + /* GLOBAL POINTER -- the global pointer is used to reference + * "small data" (see -G switch). The linker script must + * provide the gp address. + */ + movhi gp, %hi(_gp) + ori gp, gp, %lo(_gp) + + /* JUMP TO RELOC ADDR */ + movhi r4, %hi(_reloc) + ori r4, r4, %lo(_reloc) + jmp r4 +_reloc: + + /* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the + * exception address. + */ +#if !defined(CONFIG_ROM_STUBS) + movhi r4, %hi(_except_start) + ori r4, r4, %lo(_except_start) + movhi r5, %hi(_except_end) + ori r5, r5, %lo(_except_end) + movhi r6, %hi(CFG_EXCEPTION_ADDR) + ori r6, r6, %lo(CFG_EXCEPTION_ADDR) + +6: ldwio r7, 0(r4) + stwio r7, 0(r6) + addi r4, r4, 4 + addi r6, r6, 4 + bne r4, r5, 6b +#endif + + /* STACK INIT -- zero top two words for call back chain. + */ + movhi sp, %hi(CFG_INIT_SP) + ori sp, sp, %lo(CFG_INIT_SP) + addi sp, sp, -8 + stw r0, 0(sp) + stw r0, 4(sp) + mov fp, sp + + /* + * Call board_init -- never returns + */ + movhi r4, %hi(board_init@h) + ori r4, r4, %lo(board_init@h) + callr r4 + + /* NEVER RETURNS -- but branch to the _start just + * in case ;-) + */ + br _start + + /* EXCEPTION TRAMPOLINE -- the following gets copied + * to the exception address. + */ +_except_start: + movhi et, %hi(_exception) + ori et, et, %lo(_exception) + jmp et +_except_end: + + +/* + * dly_clks -- Nios2 (like Nios1) doesn't have a timebase in + * the core. For simple delay loops, we do our best by counting + * instruction cycles. + * + * Instruction performance varies based on the core. For cores + * with icache and static/dynamic branch prediction (II/f, II/s): + * + * Normal ALU (e.g. add, cmp, etc): 1 cycle + * Branch (correctly predicted, taken): 2 cycles + * Negative offset is predicted (II/s). + * + * For cores without icache and no branch prediction (II/e): + * + * Normal ALU (e.g. add, cmp, etc): 6 cycles + * Branch (no prediction): 6 cycles + * + * For simplicity, if an instruction cache is implemented we + * assume II/f or II/s. Otherwise, we use the II/e. + * + */ + .globl dly_clks + +dly_clks: + +#if (CFG_ICACHE_SIZE > 0) + subi r4, r4, 3 /* 3 clocks/loop */ +#else + subi r4, r4, 12 /* 12 clocks/loop */ +#endif + bge r4, r0, dly_clks + ret + + + +#if !defined(CONFIG_IDENT_STRING) +#define CONFIG_IDENT_STRING "" +#endif + .data + .globl version_string + +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff -Naurb u-boot-2004-08-24/cpu/nios2/traps.c u-boot-nios2/cpu/nios2/traps.c --- u-boot-2004-08-24/cpu/nios2/traps.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/cpu/nios2/traps.c 2004-08-24 05:38:59.000000000 -0400 @@ -0,0 +1,42 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/ptrace.h> +#include <common.h> + +void trap_handler (struct pt_regs *regs) +{ + /* Just issue warning */ + printf ("\n\n*** WARNING: unimplemented trap @ %08x\n\n", + regs->reg[29] - 4); +} + +void soft_emulation (struct pt_regs *regs) +{ + /* TODO: Software emulation of mul/div etc. Until this is + * implemented, generate warning and hang. + */ + printf ("\n\n*** ERROR: unimplemented instruction @ %08x\n", + regs->reg[29] - 4); + hang (); +}

2 1

[U-Boot-Users] [PATCH] Nios-II Support (2 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/common/cmd_bdinfo.c u-boot-nios2/common/cmd_bdinfo.c --- u-boot-2004-08-24/common/cmd_bdinfo.c 2004-06-08 20:34:47.000000000 -0400 +++ u-boot-nios2/common/cmd_bdinfo.c 2004-08-24 07:07:54.000000000 -0400 @@ -131,6 +131,39 @@ return 0; } +#elif defined(CONFIG_NIOS2) /* Nios-II */ + +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + DECLARE_GLOBAL_DATA_PTR; + + int i; + bd_t *bd = gd->bd; + + print_num ("mem start", (ulong)bd->bi_memstart); + print_num ("mem size", (ulong)bd->bi_memsize); + print_num ("flash start", (ulong)bd->bi_flashstart); + print_num ("flash size", (ulong)bd->bi_flashsize); + print_num ("flash offset", (ulong)bd->bi_flashoffset); + +#if defined(CFG_SRAM_BASE) + print_num ("sram start", (ulong)bd->bi_sramstart); + print_num ("sram size", (ulong)bd->bi_sramsize); +#endif + +#if defined(CFG_CMD_NET) + puts ("ethaddr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + puts ("\nip_addr = "); + print_IPaddr (bd->bi_ip_addr); +#endif + + printf ("\nbaudrate = %ld bps\n", bd->bi_baudrate); + + return 0; +} #else /* ! PPC, which leaves MIPS */ diff -Naurb u-boot-2004-08-24/common/cmd_bootm.c u-boot-nios2/common/cmd_bootm.c --- u-boot-2004-08-24/common/cmd_bootm.c 2004-04-18 17:13:43.000000000 -0400 +++ u-boot-nios2/common/cmd_bootm.c 2004-08-24 07:09:47.000000000 -0400 @@ -244,6 +244,8 @@ if (hdr->ih_arch != IH_CPU_M68K) #elif defined(__microblaze__) if (hdr->ih_arch != IH_CPU_MICROBLAZE) +#elif defined(__nios2__) + if (hdr->ih_arch != IH_CPU_NIOS2) #else # error Unknown CPU type #endif

2 1

[U-Boot-Users] [PATCH] Nios-II Support (1 of 7)
by Scott McNutt 10 Oct '04

10 Oct '04

-Add support for Altera Nios-II processors. -Add support for Psyent PCI-5441 board. -Add support for Psyent PK1C20 board. Regards, --Scott diff -Naurb u-boot-2004-08-24/board/psyent/common/AMDLV065D.c u-boot-nios2/board/psyent/common/AMDLV065D.c --- u-boot-2004-08-24/board/psyent/common/AMDLV065D.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/common/AMDLV065D.c 2004-08-24 06:11:33.000000000 -0400 @@ -0,0 +1,197 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#if defined(CONFIG_NIOS) +#include <nios.h> +#else +#include <nios2.h> +#endif + +#define SECTSZ (64 * 1024) +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/*----------------------------------------------------------------------*/ +unsigned long flash_init (void) +{ + int i; + unsigned long addr; + flash_info_t *fli = &flash_info[0]; + + fli->size = CFG_FLASH_SIZE; + fli->sector_count = CFG_MAX_FLASH_SECT; + fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D; + + addr = CFG_FLASH_BASE; + for (i = 0; i < fli->sector_count; ++i) { + fli->start[i] = addr; + addr += SECTSZ; + fli->protect[i] = 1; + } + + return (CFG_FLASH_SIZE); +} +/*--------------------------------------------------------------------*/ +void flash_print_info (flash_info_t * info) +{ + int i, k; + unsigned long size; + int erased; + volatile unsigned char *flash; + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + + /* Check if whole sector is erased */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned char *) CACHE_BYPASS(info->start[i]); + for (k = 0; k < size; k++) { + if (*flash++ != 0xff) { + erased = 0; + break; + } + } + + /* Print the info */ + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + CACHE_NO_BYPASS(info->start[i]), + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); + } + printf ("\n"); +} + +/*-------------------------------------------------------------------*/ + + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) + CACHE_BYPASS(info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int prot, sect; + ulong start; + + /* Some sanity checking */ + if ((s_first < 0) || (s_first > s_last)) { + printf ("- no sectors to erase\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* It's ok to erase multiple sectors provided we don't delay more + * than 50 usec between cmds ... at which point the erase time-out + * occurs. So don't go and put printf() calls in the loop ... it + * won't be very helpful ;-) + */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) + CACHE_BYPASS((info->start[sect])); + *addr = 0xaa; + *addr = 0x55; + *addr = 0x80; + *addr = 0xaa; + *addr = 0x55; + *addr2 = 0x30; + /* Now just wait for 0xff & provide some user + * feedback while we wait. + */ + start = get_timer (0); + while (*addr2 != 0xff) { + udelay (1000 * 1000); + putc ('.'); + if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { + printf ("timeout\n"); + return 1; + } + } + } + } + printf ("\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + + vu_char *cmd = (vu_char *) CACHE_BYPASS(info->start[0]); + vu_char *dst = (vu_char *) CACHE_BYPASS(addr); + unsigned char b; + ulong start; + + while (cnt) { + /* Check for sufficient erase */ + b = *src; + if ((*dst & b) != b) { + printf ("%02x : %02x\n", *dst, b); + return (2); + } + + *cmd = 0xaa; + *cmd = 0x55; + *cmd = 0xa0; + *dst = b; + + /* Verify write */ + start = get_timer (0); + while (*dst != b) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + dst++; + src++; + cnt--; + } + + return (0); +} diff -Naurb u-boot-2004-08-24/board/psyent/pci5441/config.mk u-boot-nios2/board/psyent/pci5441/config.mk --- u-boot-2004-08-24/board/psyent/pci5441/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pci5441/config.mk 2004-08-24 06:12:43.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2004, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x018e0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-2004-08-24/board/psyent/pci5441/Makefile u-boot-nios2/board/psyent/pci5441/Makefile --- u-boot-2004-08-24/board/psyent/pci5441/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pci5441/Makefile 2004-08-24 06:12:43.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o + +OBJS := $(BOARD).o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-2004-08-24/board/psyent/pci5441/pci5441.c u-boot-nios2/board/psyent/pci5441/pci5441.c --- u-boot-2004-08-24/board/psyent/pci5441/pci5441.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pci5441/pci5441.c 2004-08-24 06:12:43.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Psyent PCI-5441\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-2004-08-24/board/psyent/pci5441/u-boot.lds u-boot-nios2/board/psyent/pci5441/u-boot.lds --- u-boot-2004-08-24/board/psyent/pci5441/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pci5441/u-boot.lds 2004-08-24 06:12:43.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff -Naurb u-boot-2004-08-24/board/psyent/pk1c20/config.mk u-boot-nios2/board/psyent/pk1c20/config.mk --- u-boot-2004-08-24/board/psyent/pk1c20/config.mk 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pk1c20/config.mk 2004-08-24 06:15:19.000000000 -0400 @@ -0,0 +1,31 @@ +# +# (C) Copyright 2004, Psyent Corporation <www.psyent.com> +# Scott McNutt <smcnutt(a)psyent.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x018e0000 + +PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff -Naurb u-boot-2004-08-24/board/psyent/pk1c20/led.c u-boot-nios2/board/psyent/pk1c20/led.c --- u-boot-2004-08-24/board/psyent/pk1c20/led.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pk1c20/led.c 2004-08-24 06:14:26.000000000 -0400 @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <nios2.h> +#include <nios2-io.h> +#include <status_led.h> + +/* The LED port is configured as output only, so we + * must track the state manually. + */ +static led_id_t val = 0; + +void __led_init (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + pio->data = val; +} + +void __led_set (led_id_t mask, int state) +{ + nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + + if (state == STATUS_LED_ON) + val &= ~mask; + else + val |= mask; + pio->data = val; +} + +void __led_toggle (led_id_t mask) +{ + nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR); + + val ^= mask; + pio->data = val; +} diff -Naurb u-boot-2004-08-24/board/psyent/pk1c20/Makefile u-boot-nios2/board/psyent/pk1c20/Makefile --- u-boot-2004-08-24/board/psyent/pk1c20/Makefile 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pk1c20/Makefile 2004-08-24 06:14:26.000000000 -0400 @@ -0,0 +1,50 @@ +# +# (C) Copyright 2001-2004 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COMOBJS := ../common/AMDLV065D.o + +OBJS := $(BOARD).o led.o $(COMOBJS) + +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -Naurb u-boot-2004-08-24/board/psyent/pk1c20/pk1c20.c u-boot-nios2/board/psyent/pk1c20/pk1c20.c --- u-boot-2004-08-24/board/psyent/pk1c20/pk1c20.c 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pk1c20/pk1c20.c 2004-08-24 06:14:26.000000000 -0400 @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + puts ("BOARD : Psyent PK-1C20\n"); + return 0; +} + +long int initdram (int board_type) +{ + return (0); +} diff -Naurb u-boot-2004-08-24/board/psyent/pk1c20/u-boot.lds u-boot-nios2/board/psyent/pk1c20/u-boot.lds --- u-boot-2004-08-24/board/psyent/pk1c20/u-boot.lds 1969-12-31 19:00:00.000000000 -0500 +++ u-boot-nios2/board/psyent/pk1c20/u-boot.lds 2004-08-24 06:14:26.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2004, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt(a)psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +OUTPUT_FORMAT("elf32-littlenios2") +OUTPUT_ARCH(nios2) +ENTRY(_start) + +SECTIONS +{ + .text : + { + cpu/nios2/start.o (.text) + *(.text) + *(.text.*) + *(.gnu.linkonce.t*) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r*) + } + . = ALIGN (4); + _etext = .; + PROVIDE (etext = .); + + /* CMD TABLE - sandwich this in between text and data so + * the initialization code relocates the command table as + * well -- admittedly, this is just pure laziness ;-) + */ + __u_boot_cmd_start = .; + .u_boot_cmd : + { + *(.u_boot_cmd) + } + . = ALIGN(4); + __u_boot_cmd_end = .; + + /* INIT DATA sections - "Small" data (see the gcc -G option) + * is always gp-relative. Here we make all init data sections + * adjacent to simplify the startup code -- and provide + * the global pointer for gp-relative access. + */ + _data = .; + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + } + + . = ALIGN(16); + _gp = .; /* Global pointer addr */ + PROVIDE (gp = .); + + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + + _edata = .; + PROVIDE (edata = .); + + /* UNINIT DATA - Small uninitialized data is first so it's + * adjacent to sdata and can be referenced via gp. The normal + * bss follows. We keep it adjacent to simplify init code. + */ + __bss_start = .; + .sbss : + { + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + } + . = ALIGN(4); + .bss : + { + *(.bss) + *(.bss.*) + *(.dynbss) + *(COMMON) + *(.scommon) + } + . = ALIGN(4); + _end = .; + PROVIDE (end = .); + + /* DEBUG -- symbol table, string table, etc. etc. + */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +}

2 1

[U-Boot-Users] [PATCH] Support for new boards MPC8541CDS and MPC8555CDS
by Jon Loeliger 10 Oct '04

10 Oct '04

Wolfgang, This patch adds support for two boards in the new CDS family. These boards already have CPU support in cpu/mpc85xx, so only the board directories are added with this patch. It should apply against current CVS with ``patch -p 2''. Thanks, jdl * Patch by Jon Loeliger, 24-Aug-2004 Add support for the MPC8541 and MPC8555 CDS boards.

2 1