August 2003 - U-Boot

[U-Boot-Users] mkimage for DOS
by Dave Westwood 10 Jun '05

10 Jun '05

long shot really, but does anyone have a working executable mkimage for DOS or a dos window in windows (don't flame me for using windows !!)

2 1

[U-Boot-Users] loading linux in FADS860T board through u-boot-1.0.0
by RamanaYV 17 Mar '04

17 Mar '04

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0. I have settted environment variables like ipaddr,serverip,ethaddr,bootargs bootfile and saved the environment. Then,i typed tftpboot to download image from server. Then,i typed bootm to start the booting process. System is stucked by showing "Uncompressing Kernel Image ... OK" sequence of these events r given below.can u please suggest, what i need to do to come out from this. Thank you. U-Boot 1.0.0 (Mar 17 2004 - 14:06:16) CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB FLASH: 2 MB In: serial Out: serial Err: serial Net: FEC ETHERNET =>printenv stdin=serial stdout=serial stderr=serial Environment size: 41/16380 bytes =>setenv ipaddr 192.168.1.115 =>setenv serverip 192.168.1.87 =>setenv ip 192.168.1.115 =>setenv ethaddr 00:30:bf:01:02:d0 =>setenv bootargs "root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192 .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" =>setenv bootfile "pImage_fads_fec" =>saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors =>printenv stdin=serial stdout=serial stderr=serial ipaddr=192.168.1.115 serverip=192.168.1.87 ip=192.168.1.115 ethaddr=00:30:bf:01:02:d0 bootargs="root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168 1.11 5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" bootfile="pImage_fads_fec" Environment size: 287/16380 bytes =>tftpboot TFTP from server 192.168.1.87; our IP address is 192.168.1.115 Filename 'pImage_fads_fec'. Load address: 0x100000 Loading: T invalid RARP header #####################################################TX timeout ############ ####################### done Bytes transferred = 448321 (6d741 hex) =>bootm ## Booting image at 00100000 . Image Name: Linux-2.4.4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 448257 Bytes = 437.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK

3 2

[U-Boot-Users] FADS860T board
by RamanaYV 17 Mar '04

17 Mar '04

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0. i am getting the followin symptom, can anyone suggest to come out from this problem.. U-Boot 1.0.0 (Mar 17 2004 - 14:06:16) CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB FLASH: 2 MB In: serial Out: serial Err: serial Net: FEC ETHERNET =>printenv stdin=serial stdout=serial stderr=serial Environment size: 41/16380 bytes =>setenv ipaddr 192.168.1.115 =>setenv serverip 192.168.1.87 =>setenv ip 192.168.1.115 =>setenv ethaddr 00:30:bf:01:02:d0 =>setenv bootargs "root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192 .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" =>setenv bootfile "pImage_fads_fec" =>saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors =>printenv stdin=serial stdout=serial stderr=serial ipaddr=192.168.1.115 serverip=192.168.1.87 ip=192.168.1.115 ethaddr=00:30:bf:01:02:d0 bootargs="root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168.1.11 5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" bootfile="pImage_fads_fec" Environment size: 287/16380 bytes =>tftpboot TFTP from server 192.168.1.87; our IP address is 192.168.1.115 Filename 'pImage_fads_fec'. Load address: 0x100000 Loading: T invalid RARP header #####################################################TX timeout ############ ####################### done Bytes transferred = 448321 (6d741 hex) =>bootm ## Booting image at 00100000 ... Image Name: Linux-2.4.4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 448257 Bytes = 437.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Thanks to all.

2 1

[U-Boot-Users] what is wrong when calloc return bogus?
by Holger Schurig 06 Nov '03

06 Nov '03

I recently updated from u-boot 0.3.2 to CVS (0.4.5). Now blob stopped working. I tracked this down from device_init() to ListCreate() or NewHandle(). My debug output is: U-Boot 0.4.5 (Aug 15 2003 - 18:26:38) U-Boot code: A3000000 -> A300D4E0 BSS: -> A3024000 DRAM Configuration: Bank #0: a0000000 128 MB Flash: 32 MB 1 2 4 6 7 9 10 d1 d3 l1 n1 n2 memPtr=0badc0e8 n3 hanPtr=0badc108 n4 l2 l3 0badc108 list_t ListCreate (int elementSize) { list_t list; printf("l1\n"); list = (list_t) (NewHandle (sizeof (ListStruct))); /* create empty list */ printf("l2\n"); if (list) { printf("l3 %08x\n", list); (*list)->signature = LIST_SIGNATURE; (*list)->numItems = 0; (*list)->listSize = 0; (*list)->itemSize = elementSize; (*list)->percentIncrease = kDefaultAllocationPercentIncrease; (*list)->minNumItemsIncrease = kDefaultAllocationminNumItemsIncrease; } printf("l4\n"); return list; } Target is an Intel PXA255

3 2

[U-Boot-Users] [PATCH] support for Intel IXP
by Kyle Harris 10 Oct '03

10 Oct '03

Wolfgang, Please find attached a patch for Intel CPU IXP425 and eval board IXDP425. This is applied against 0.4.0 (I tried several times to pull from CVS but failed, and finally gave up). Note: This patch does NOT include support for the PCI bridge :( Regards, Kyle.

3 8

[U-Boot-Users] (no subject)
by C Doyle 27 Sep '03

27 Sep '03

Hello all, Ive been trying to compile u-boot0.4 for the mpc8266ads board. I am using the hardhat ppc-cross compiler and am coming across problems with the compilation. First of all make fails at a bootp error which can be fixed by placing parenthesis around the #define. It next fails in the examples folder where I think it is trying the hello_world.bin & others and this can be fixed by doing a chmod on each of the examples it fails on. Just wondering if anyone is coming across the same problems and if any official fixes are available for this? After I change these the project compiles ok. Cheers _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus

2 1

[U-Boot-Users] u-boot on Memec P4/7-FG456 (w/ virtex II pro)?
by jds 12 Sep '03

12 Sep '03

hi, has anyone done any u-boot porting work for the Memec Virtex-II Pro P4/7-FG456 evaluation board? as you can see from the link below this is a development board which has the Virtex-II Pro (w/ single 405GP core) along with SDRAM, NV stroage via compact flash, and so forth. http://www.memec.com/cgi-bin/bvutf8/memec/scripts/local/manuDetailArticle.j… we are considering using this board as an R&D platfrom for an upcoming project. thanks! -- Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away. - Antoine de Saint-Exupery

2 2

Re: [U-Boot-Users] i2c for mpc107 bridge
by Wolfgang Denk 10 Sep '03

10 Sep '03

Dear Gleb, in message <20030828123944.GA10453(a)nbase.co.il> you wrote: > > > Can you please submit this as a proper patch? See the corresponding > > section in the README for instructions. > > > No problem. > > Attached patch is against u-boot-0.4.0. I can't download CVS download is to slow. > I hope it will apply. It does not, but I'm willing to fix this (if you cannot or do not want to prepare a patch against a never version). If the public CVS server is too slow please remember that nightly CVS snapshots are available for FTP. Main problem: can you please add a GPL header to your new files and resubmit the patch? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd(a)denx.de One difference between a man and a machine is that a machine is quiet when well oiled.

2 2

[U-Boot-Users] Motorola PPC8270
by Matias Sundman (TB/EAB) 01 Sep '03

01 Sep '03

Hi, I have now started my work on porting u-boot to a Motorola PPC8270 based board. I wonder if anybody has already made a CPU (PPC8270) port? I guess the PPC8260 is pretty close to the PPC8270, perhaps I can use that as my guiding principle im my coming efforts? P.S. In the top level README file, the C - code on how to port u-boot made me LOL! //Matias

3 2

[U-Boot-Users] Patch: PCI mode indication for PQ2FADS-ZU
by Yuli Barcohen 31 Aug '03

31 Aug '03

Hi, According to the MPC8260 User's Manual, PCI_MODE signal should be reflected in SCCR register, and local bus pins configuration is taken from HRCW and appears in SIUMCR. For some reason it does not work this way, so the only possibility to detect if the board is configured in PCI mode is to check the BCSR. The attached patch sets SCCR and SIUMCR according to the BCSR. -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli(a)arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ======================================================================== Index: board/mpc8260ads/mpc8260ads.c =================================================================== RCS file: /home/CVS/u-boot/u-boot/board/mpc8260ads/mpc8260ads.c,v retrieving revision 1.1.1.5 retrieving revision 1.9 diff -p -u -r1.1.1.5 -r1.9 --- board/mpc8260ads/mpc8260ads.c 6 Aug 2003 17:03:01 -0000 1.1.1.5 +++ board/mpc8260ads/mpc8260ads.c 7 Aug 2003 09:22:32 -0000 1.9 @@ -35,6 +35,7 @@ #include <common.h> #include <ioports.h> #include <mpc8260.h> +#include <asm/m8260_pci.h> #include <i2c.h> #include <spd.h> #include <miiphy.h> @@ -237,6 +238,7 @@ int board_pre_init (void) long int initdram (int board_type) { + vu_long *bcsr = (vu_long *)CFG_BCSR; volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar *ramaddr, c = 0xff; @@ -252,27 +254,41 @@ long int initdram (int board_type) immap->im_siu_conf.sc_ppc_alrh = 0x01267893; immap->im_siu_conf.sc_tescr1 = 0x00004000; +#if CONFIG_ADSTYPE == CFG_PQ2FADS + if ((bcsr[3] & BCSR_PCI_MODE) == 0) { /* PCI mode selected by JP9 */ + immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN; + immap->im_siu_conf.sc_siumcr = + (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) + | SIUMCR_LBPC01; + } +#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ + memctl->memc_mptpr = CFG_MPTPR; #ifdef CFG_LSDRAM_BASE - /* Init local bus SDRAM */ - memctl->memc_lsrt = CFG_LSRT; + /* + Initialise local bus SDRAM only if the pins + are configured as local bus pins and not as PCI. + The configuration is determined by the HRCW. + */ + if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) { + memctl->memc_lsrt = CFG_LSRT; #if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */ - memctl->memc_or3 = 0xFF803280; - memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861; + memctl->memc_or3 = 0xFF803280; + memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861; #else /* CS4 */ - memctl->memc_or4 = 0xFFC01480; - memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861; + memctl->memc_or4 = 0xFFC01480; + memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861; #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ - memctl->memc_lsdmr = CFG_LSDMR | 0x28000000; - ramaddr = (uchar *) CFG_LSDRAM_BASE; - *ramaddr = c; - memctl->memc_lsdmr = CFG_LSDMR | 0x08000000; - for (i = 0; i < 8; i++) { + memctl->memc_lsdmr = CFG_LSDMR | 0x28000000; + ramaddr = (uchar *) CFG_LSDRAM_BASE; + *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | 0x08000000; + for (i = 0; i < 8; i++) + *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | 0x18000000; *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | 0x40000000; } - memctl->memc_lsdmr = CFG_LSDMR | 0x18000000; - *ramaddr = c; - memctl->memc_lsdmr = CFG_LSDMR | 0x40000000; #endif /* CFG_LSDRAM_BASE */ /* Init 60x bus SDRAM */ Index: include/configs/MPC8260ADS.h =================================================================== RCS file: /home/CVS/u-boot/u-boot/include/configs/MPC8260ADS.h,v retrieving revision 1.1.1.5 retrieving revision 1.11 diff -p -u -r1.1.1.5 -r1.11 --- include/configs/MPC8260ADS.h 6 Aug 2003 17:03:02 -0000 1.1.1.5 +++ include/configs/MPC8260ADS.h 7 Aug 2003 09:22:32 -0000 1.11 @@ -206,6 +206,8 @@ /* * Miscellaneous configurable options */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) @@ -247,7 +249,7 @@ #define CFG_IMMR 0xF0000000 #define CFG_BCSR 0xF4500000 #define CFG_SDRAM_BASE 0x00000000 -#define CFG_LSDRAM_BASE 0xD0000000 +#define CFG_LSDRAM_BASE 0xFD000000 #define RS232EN_1 0x02000002 #define RS232EN_2 0x01000001 @@ -255,6 +257,7 @@ #define FETH1_RST 0x04000004 #define FETHIEN2 0x01000000 #define FETH2_RST 0x08000000 +#define BCSR_PCI_MODE 0x01000000 #define CFG_INIT_RAM_ADDR CFG_IMMR #define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ @@ -326,6 +329,10 @@ #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 + +#if CONFIG_ADSTYPE == CFG_8266ADS +#undef CFG_LSDRAM_BASE /* No local bus SDRAM on MPC8266ADS */ +#endif /* CONFIG_ADSTYPE == CFG_8266ADS */ #if CONFIG_ADSTYPE == CFG_PQ2FADS #define CFG_PSDMR 0x824B36A3

2 1