July 2003 - U-Boot

[U-Boot-Users] loading linux in FADS860T board through u-boot-1.0.0
by RamanaYV 17 Mar '04

17 Mar '04

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0. I have settted environment variables like ipaddr,serverip,ethaddr,bootargs bootfile and saved the environment. Then,i typed tftpboot to download image from server. Then,i typed bootm to start the booting process. System is stucked by showing "Uncompressing Kernel Image ... OK" sequence of these events r given below.can u please suggest, what i need to do to come out from this. Thank you. U-Boot 1.0.0 (Mar 17 2004 - 14:06:16) CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB FLASH: 2 MB In: serial Out: serial Err: serial Net: FEC ETHERNET =>printenv stdin=serial stdout=serial stderr=serial Environment size: 41/16380 bytes =>setenv ipaddr 192.168.1.115 =>setenv serverip 192.168.1.87 =>setenv ip 192.168.1.115 =>setenv ethaddr 00:30:bf:01:02:d0 =>setenv bootargs "root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192 .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" =>setenv bootfile "pImage_fads_fec" =>saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors =>printenv stdin=serial stdout=serial stderr=serial ipaddr=192.168.1.115 serverip=192.168.1.87 ip=192.168.1.115 ethaddr=00:30:bf:01:02:d0 bootargs="root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168 1.11 5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" bootfile="pImage_fads_fec" Environment size: 287/16380 bytes =>tftpboot TFTP from server 192.168.1.87; our IP address is 192.168.1.115 Filename 'pImage_fads_fec'. Load address: 0x100000 Loading: T invalid RARP header #####################################################TX timeout ############ ####################### done Bytes transferred = 448321 (6d741 hex) =>bootm ## Booting image at 00100000 . Image Name: Linux-2.4.4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 448257 Bytes = 437.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK

3 2

[U-Boot-Users] FADS860T board
by RamanaYV 17 Mar '04

17 Mar '04

I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0. i am getting the followin symptom, can anyone suggest to come out from this problem.. U-Boot 1.0.0 (Mar 17 2004 - 14:06:16) CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB FLASH: 2 MB In: serial Out: serial Err: serial Net: FEC ETHERNET =>printenv stdin=serial stdout=serial stderr=serial Environment size: 41/16380 bytes =>setenv ipaddr 192.168.1.115 =>setenv serverip 192.168.1.87 =>setenv ip 192.168.1.115 =>setenv ethaddr 00:30:bf:01:02:d0 =>setenv bootargs "root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192 .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" =>setenv bootfile "pImage_fads_fec" =>saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors =>printenv stdin=serial stdout=serial stderr=serial ipaddr=192.168.1.115 serverip=192.168.1.87 ip=192.168.1.115 ethaddr=00:30:bf:01:02:d0 bootargs="root=/dev/nfs rw nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168.1.11 5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off" bootfile="pImage_fads_fec" Environment size: 287/16380 bytes =>tftpboot TFTP from server 192.168.1.87; our IP address is 192.168.1.115 Filename 'pImage_fads_fec'. Load address: 0x100000 Loading: T invalid RARP header #####################################################TX timeout ############ ####################### done Bytes transferred = 448321 (6d741 hex) =>bootm ## Booting image at 00100000 ... Image Name: Linux-2.4.4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 448257 Bytes = 437.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Thanks to all.

2 1

[U-Boot-Users] [PATCH] support for Intel IXP
by Kyle Harris 10 Oct '03

10 Oct '03

Wolfgang, Please find attached a patch for Intel CPU IXP425 and eval board IXDP425. This is applied against 0.4.0 (I tried several times to pull from CVS but failed, and finally gave up). Note: This patch does NOT include support for the PCI bridge :( Regards, Kyle.

3 8

[U-Boot-Users] (no subject)
by C Doyle 27 Sep '03

27 Sep '03

Hello all, Ive been trying to compile u-boot0.4 for the mpc8266ads board. I am using the hardhat ppc-cross compiler and am coming across problems with the compilation. First of all make fails at a bootp error which can be fixed by placing parenthesis around the #define. It next fails in the examples folder where I think it is trying the hello_world.bin & others and this can be fixed by doing a chmod on each of the examples it fails on. Just wondering if anyone is coming across the same problems and if any official fixes are available for this? After I change these the project compiles ok. Cheers _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus

2 1

[U-Boot-Users] u-boot on Memec P4/7-FG456 (w/ virtex II pro)?
by jds 12 Sep '03

12 Sep '03

hi, has anyone done any u-boot porting work for the Memec Virtex-II Pro P4/7-FG456 evaluation board? as you can see from the link below this is a development board which has the Virtex-II Pro (w/ single 405GP core) along with SDRAM, NV stroage via compact flash, and so forth. http://www.memec.com/cgi-bin/bvutf8/memec/scripts/local/manuDetailArticle.j… we are considering using this board as an R&D platfrom for an upcoming project. thanks! -- Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away. - Antoine de Saint-Exupery

2 2

[U-Boot-Users] Linux kernel crash in the early_init function
by llandre 28 Aug '03

28 Aug '03

I have a problem with U-Boot on the 405EP eval. board. Everything works fine until the kernel takes control and the system hangs: ------------------------------------------------------------------------------------ U-Boot 0.2.0 (May 6 2003 - 12:04:15) CPU: IBM PowerPC 405EP Rev. A at 266.666 MHz (PLB=133, OPB=66, EBC=66 MHz) PCI async ext clock used (sync mode not supported), internal PCI arbd 16 kB I-Cache 16 kB D-Cache Board: ### No HW ID - assuming WALNUT405 I2C: ready DRAM: 128 MB Top of RAM usable for U-Boot at: 08000000 Reserving 192k for U-Boot at: 07fd0000 Reserving 132k for malloc() at: 07faf000 Reserving 112 Bytes for Board Info at: 07faef90 Reserving 44 Bytes for Global Data at: 07faef64 Stack Pointer at: 07faef48 New Stack Pointer is: 07faef48 Now running in RAM - U-Boot at: 07fd0000 FLASH: 512 kB [board.c, 767] Calling env_relocate ... env_relocate[203] offset = 0x8050000 env_relocate[221] malloced ENV at 07faf008 In: serial Out: serial Err: serial KGDB: kgdb ready ready U-Boot relocated to 07fd0000 [board.c, 913] Calling interrupt_init ... ### main_loop entered: bootdelay=3 ### main_loop: bootcmd="tftpboot 0x400000 vmlinux.PPCBoot" Hit any key to stop autoboot: 0 ENET Speed is 10 Mbps - HALF duplex connection TX_BUFF 0 @ 0x07fb0228 RX_BUFF 0 @ 0x07ff3fc0 RX_BUFF 1 @ 0x07ff45c0 RX_BUFF 2 @ 0x07ff4bc0 RX_BUFF 3 @ 0x07ff51c0 Install interrupt for vector 9 ==> 07fd49c0 Install interrupt for vector 10 ==> 07fd49c0 Install interrupt for vector 11 ==> 07fd49c0 Install interrupt for vector 12 ==> 07fd49c0 Install interrupt for vector 13 ==> 07fd49c0 Install interrupt for vector 14 ==> 07fd49c0 Install interrupt for vector 15 ==> 07fd49c0 ARP broadcast 1 Got good ARP - start TFTP TFTP from server 192.168.10.6; our IP address is 192.168.10.203 Filename 'vmlinux.PPCBoot'. Load address: 0x400000 Loading: ################################################################# ######################################### done Bytes transferred = 539758 (83c6e hex) Automatic boot of image at addr 0x00400000 ... ## Booting image at 00400000 ... Image Name: Linux-2.4.21-pre5 Created: 2003-05-06 11:42:31 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 539694 Bytes = 527 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Current stack ends at 0x07FAE5B8 => set upper limit to 0x00800000 ## cmdline at 0x007FFC00 ... 0x007FFC16 bd address = 0x07FAEF90 memstart = 0x00000000 memsize = 0x08000000 flashstart = 0xFFF80000 flashsize = 0x00080000 flashoffset = 0x00030000 sramstart = 0x00000000 sramsize = 0x00000000 bootflags = 0x6BBA3A55 procfreq = 266.666 MHz plb_busfreq = 133.333 MHz pci_busfreq = 33.333 MHz ethaddr = 00:50:C2:1E:AF:FE IP addr = 192.168.10.203 baudrate = 115200 bps No initrd ## Transferring control to Linux (at address 00000000) ... ------------------------------------------------------------------------------------ I found that the function memset_io, invoked by early_init, corrupts the memory region where the function identify_cpu is located. This is the disassembled produced by objdump: c0006774 <identify_cpu>: c0006774: 3d 03 c0 12 addis r8,r3,-16366 c0006778: 39 08 e1 40 addi r8,r8,-7872 c000677c: 7c ff 42 a6 mfpvr r7 c0006780: 80 a8 00 00 lwz r5,0(r8) c0006784: 7c a5 38 38 and r5,r5,r7 c0006788: 80 c8 00 04 lwz r6,4(r8) c000678c: 7c 06 28 40 cmplw r6,r5 c0006790: 41 82 00 0c beq- c000679c <identify_cpu+0x28> c0006794: 39 08 00 20 addi r8,r8,32 c0006798: 4b ff ff e8 b c0006780 <identify_cpu+0xc> c000679c: 3c c3 c0 14 addis r6,r3,-16364 c00067a0: 38 c6 f0 bc addi r6,r6,-3908 c00067a4: 54 84 10 3a rlwinm r4,r4,2,0,29 c00067a8: 7d 03 40 50 subf r8,r3,r8 c00067ac: 7d 04 31 2e stwx r8,r4,r6 c00067b0: 4e 80 00 20 blr This is what I see in memory before executing the memset_io: PPC405EP>go - TARGET: target has entered debug mode PPC405EP>md 0xc0006774 8 c0006774 : 0x3d03c012 1023655954 =... c0006778 : 0x3908e140 956883264 9..@ c000677c : 0x7cff42a6 2097103526 |.B. c0006780 : 0x80a80000 -2136473600 .... c0006784 : 0x7ca53838 2091202616 |.88 c0006788 : 0x80c80004 -2134376444 .... c000678c : 0x7c062840 2080778304 |.(@ c0006790 : 0x4182000c 1099038732 A... PPC405EP>go - TARGET: target has entered debug mode This is what I see in memory after executing the memset_io: PPC405EP>md 0xc0006774 8 c0006774 : 0xff03ffff - 16515073 .... c0006778 : 0xff08ffff - 16187393 .... c000677c : 0xff08ffff - 16187393 .... c0006780 : 0x80a80000 -2136473600 .... c0006784 : 0x7ca53838 2091202616 |.88 c0006788 : 0x80c80004 -2134376444 .... c000678c : 0x3c060840 1007028288 <..@ c0006790 : 0x7c062840 2080778304 |.(@ PPC405EP> Anybody have already seen something like that? Is it possible that this has to do with an erroneous cache initialization? Many thanks in advance. llandre

2 1

[U-Boot-Users] DiscoveryII (Marvell MV64360) support?
by wombat＠ottawa.com 18 Aug '03

18 Aug '03

Hi folks, I was just curious what the status of (Marvell MV64360). I've looked around, and grabbed the latest 'u-boot' cvs snapshot and don't see any DISCOII support. I do see DISCOI (marvell 64260) support in include/galileo/*. Does anyone have plans to add that support to 'u-boot'? Doing some looking around, the only thing I could find was that Artesyn seems to have a cPCI PPC board with both DISCOII & 'ppcboot' (on their webpage, they probably haven't updated the webpage and they mean u-boot). http://www.artesyncp.com/products/Katana750i.html Any information would be greatly appreciated. thanks, Craig.

2 1

[U-Boot-Users] Function pointers after relocation
by Robin Gilks 03 Aug '03

03 Aug '03

Greetings When u-boot has relocated from Flash to RAM, it is correct that function pointers (eg. getenv()) still point to the Flash code rather than the RAM copy? Would this be corrected by changing the link address, in which case where do I find it (the link address that is) - in the .lds file? board = mpc866ads (fads alike) cpu = mpc866 (mpc860 alike) all changes based on ads860+fads merge!! -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks(a)tait.co.nz New Zealand

4 14

[U-Boot-Users] Compiling U-boot using ELDK on Mandrake9.1
by C Doyle 31 Jul '03

31 Jul '03

Hello, I am a student trying to get u-boot0.4.0 up and running on an MPC8266ADS board using ELDK as a cross compiler. I managed to get the ELDK installed what seems to be problem free. I am trying to cross compile u-boot0.4.0 for the MPC8266ADS development board. I have a Host PC running Mandrake 9.1 which I notice is about the only distribution that eldk has not been tested with. Has anyone managed to get u-boot0.4.0 compiled on Mandrake or can anyone tell me what the problem is in the astest.o symbol at the end of the Makefile output below? There seems to be some problem with the /opt/eldk/ppc_82xx/usr/lib/libbfd.so. Previously I have used a hardhat cross-compiler and noticed that it was using /libbfd.a as opposed to /libbfd.so. Do I need to export the symbols from libbfd.so? Any help would be greatly appreciated... Thanks, Ciaran Doyle I have made the following changes to the root dir Makefile: HOSTARCH := ppc ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = /opt/eldk/usr/bin/ppc_82xx- else ifeq ($(ARCH),ppc) CROSS_COMPILE = ppc_8xx- endif And in the ./tools/gdb/Makefile I have updated the path as follows: astest: astest.o error.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ -L$(BFD_ROOT_DIR)/lib -L /opt/eldk/ppc_82xx/usr/lib -lbfd -liberty I run the configuration script for u-boot0.4.0 [root@MPC8266 u-boot-0.4.0]# make MPC8266ADS_config rm -f include/config.h include/config.mk Configuring for MPC8266ADS board... -Followed by a make all (sorry for including all of the make output - just in case theres any clues in it): [root@MPC8266 u-boot-0.4.0]# make all make[1]: Entering directory `/u-boot-0.4.0/tools' ln -s ../common/environment.c environment.c ln -s ../lib_generic/crc32.c crc32.c gcc -M -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC environment.c img2srec.c mkimage.c crc32.c envcrc.c gen_eth_addr.c bmp_logo.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/tools' make[1]: Entering directory `/u-boot-0.4.0/tools' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/tools' make[1]: Entering directory `/u-boot-0.4.0/lib_generic' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes crc32.c ctype.c display_options.c ldiv.c string.c vsprintf.c zlib.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/lib_generic' make[1]: Entering directory `/u-boot-0.4.0/lib_generic' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/lib_generic' make[1]: Entering directory `/u-boot-0.4.0/lib_ppc' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes ppcstring.S ticks.S board.c bat_rw.c cache.c extable.c kgdb.c time.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/lib_ppc' make[1]: Entering directory `/u-boot-0.4.0/lib_ppc' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/lib_ppc' make[1]: Entering directory `/u-boot-0.4.0/cpu/mpc8260' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes start.S kgdb.S traps.c serial_smc.c serial_scc.c cpu.c cpu_init.c speed.c interrupts.c ether_scc.c ether_fcc.c i2c.c commproc.c bedbug_603e.c pci.c spi.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/cpu/mpc8260' make[1]: Entering directory `/u-boot-0.4.0/cpu/mpc8260' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/cpu/mpc8260' make[1]: Entering directory `/u-boot-0.4.0/board/mpc8266ads' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board mpc8266ads.c flash.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/board/mpc8266ads' make[1]: Entering directory `/u-boot-0.4.0/board/mpc8266ads' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/board/mpc8266ads' make[1]: Entering directory `/u-boot-0.4.0/common' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes main.c altera.c bedbug.c cmd_autoscript.c cmd_bedbug.c cmd_bmp.c cmd_boot.c cmd_bootm.c cmd_cache.c cmd_console.c cmd_date.c cmd_dcr.c cmd_diag.c cmd_doc.c cmd_nand.c cmd_dtt.c cmd_eeprom.c cmd_elf.c cmd_fat.c cmd_fdc.c cmd_fdos.c cmd_flash.c cmd_fpga.c cmd_i2c.c cmd_ide.c cmd_immap.c cmd_jffs2.c cmd_log.c cmd_mem.c cmd_mii.c cmd_misc.c cmd_mmc.c cmd_net.c cmd_nvedit.c env_common.c env_flash.c env_eeprom.c env_nvram.c env_nowhere.c cmd_pci.c cmd_pcmcia.c cmd_portio.c cmd_reginfo.c cmd_scsi.c cmd_vfd.c cmd_usb.c command.c console.c devices.c dlmalloc.c docecc.c environment.c flash.c fpga.c hush.c kgdb.c lists.c miiphybb.c miiphyutil.c s_record.c soft_i2c.c soft_spi.c cmd_spi.c spartan2.c usb.c usb_kbd.c usb_storage.c virtex2.c xilinx.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/common' make[1]: Entering directory `/u-boot-0.4.0/common' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/common' make[1]: Entering directory `/u-boot-0.4.0/disk' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes part.c part_mac.c part_dos.c part_iso.c part_amiga.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/disk' make[1]: Entering directory `/u-boot-0.4.0/disk' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/disk' make[1]: Entering directory `/u-boot-0.4.0/fs' make[2]: Entering directory `/u-boot-0.4.0/fs/jffs2' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes jffs2_1pass.c compr_rtime.c compr_rubin.c compr_zlib.c mini_inflate.c > .depend make[2]: Leaving directory `/u-boot-0.4.0/fs/jffs2' make[2]: Entering directory `/u-boot-0.4.0/fs/jffs2' make[2]: `.depend' is up to date. make[2]: Leaving directory `/u-boot-0.4.0/fs/jffs2' make[2]: Entering directory `/u-boot-0.4.0/fs/fdos' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes fat.c vfat.c dev.c fdos.c fs.c subdir.c > .depend make[2]: Leaving directory `/u-boot-0.4.0/fs/fdos' make[2]: Entering directory `/u-boot-0.4.0/fs/fdos' make[2]: `.depend' is up to date. make[2]: Leaving directory `/u-boot-0.4.0/fs/fdos' make[2]: Entering directory `/u-boot-0.4.0/fs/fat' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I../..//include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I../..//board -Wall -Wstrict-prototypes fat.c file.c > .depend make[2]: Leaving directory `/u-boot-0.4.0/fs/fat' make[2]: Entering directory `/u-boot-0.4.0/fs/fat' make[2]: `.depend' is up to date. make[2]: Leaving directory `/u-boot-0.4.0/fs/fat' make[1]: Leaving directory `/u-boot-0.4.0/fs' make[1]: Entering directory `/u-boot-0.4.0/net' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes net.c tftp.c bootp.c rarp.c eth.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/net' make[1]: Entering directory `/u-boot-0.4.0/net' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/net' make[1]: Entering directory `/u-boot-0.4.0/rtc' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes date.c ds12887.c ds1302.c ds1306.c ds1307.c ds1337.c ds1556.c ds164x.c ds174x.c m41t11.c m48t35ax.c mc146818.c mk48t59.c mpc8xx.c pcf8563.c s3c24x0_rtc.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/rtc' make[1]: Entering directory `/u-boot-0.4.0/rtc' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/rtc' make[1]: Entering directory `/u-boot-0.4.0/dtt' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes lm75.c ds1621.c adm1021.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/dtt' make[1]: Entering directory `/u-boot-0.4.0/dtt' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/dtt' make[1]: Entering directory `/u-boot-0.4.0/drivers' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes 3c589.c 5701rls.c ali512x.c bcm570x.c bcm570x_autoneg.c cfb_console.c cs8900.c ct69000.c dataflash.c dc2114x.c e1000.c eepro100.c i8042.c i82365.c inca-ip_sw.c lan91c96.c natsemi.c ns16550.c ns8382x.c ns87308.c pci.c pci_auto.c pci_indirect.c pcnet.c plb2800_eth.c s3c24x0_i2c.c sed13806.c serial.c serial_max3100.c smc91111.c smiLynxEM.c sym53c8xx.c ti_pci1410a.c tigon3.c w83c553f.c status_led.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/drivers' make[1]: Entering directory `/u-boot-0.4.0/drivers' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/drivers' make[1]: Entering directory `/u-boot-0.4.0/post' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes cache_8xx.S post.c tests.c cpu.c rtc.c watchdog.c memory.c i2c.c cache.c sysmon.c uart.c ether.c usb.c spr.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/post' make[1]: Entering directory `/u-boot-0.4.0/post' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/post' make[1]: Entering directory `/u-boot-0.4.0/post/cpu' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes asm.S cmp.c cmpi.c two.c twox.c three.c threex.c threei.c andi.c srawi.c rlwnm.c rlwinm.c rlwimi.c store.c load.c cr.c b.c multi.c string.c complex.c > .depend make[1]: Leaving directory `/u-boot-0.4.0/post/cpu' make[1]: Entering directory `/u-boot-0.4.0/post/cpu' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/post/cpu' make[1]: Entering directory `/u-boot-0.4.0/examples' /opt/eldk/usr/bin/ppc_82xx-gcc -M -g -Os -mrelocatable -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/include -fno-builtin -nostdinc -isystem /opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -mmultiple -DTEXT_BASE=0xfe000000 -I/u-boot-0.4.0/board -Wall -Wstrict-prototypes hello_world.c sched.c mem_to_mem_idma2intr.c syscall.S ppc_longjmp.S ppc_setjmp.S > .depend make[1]: Leaving directory `/u-boot-0.4.0/examples' make[1]: Entering directory `/u-boot-0.4.0/examples' make[1]: `.depend' is up to date. make[1]: Leaving directory `/u-boot-0.4.0/examples' make[1]: Entering directory `/u-boot-0.4.0/tools' gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c -o img2srec.o img2srec.c gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -o img2srec img2srec.o strip img2srec gcc -g -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c mkimage.c gcc -g -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c crc32.c gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -o mkimage mkimage.o crc32.o strip mkimage gcc -g -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c envcrc.c gcc -g -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -c environment.c gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -o envcrc envcrc.o crc32.o environment.o gcc -g -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c gen_eth_addr.c gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -o gen_eth_addr gen_eth_addr.o strip gen_eth_addr gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -c -o bmp_logo.o bmp_logo.c gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0xfe000000 -DUSE_HOSTCC -O -o bmp_logo bmp_logo.o strip bmp_logo ./bmp_logo logos/denx.bmp >/u-boot-0.4.0/include/bmp_logo.h make[2]: Entering directory `/u-boot-0.4.0/tools/gdb' gcc -M -I/opt/eldk/ppc_82xx/include -I../include gdbsend.c gdbcont.c astest.c error.c remote.c serial.c > .depend make[2]: Leaving directory `/u-boot-0.4.0/tools/gdb' make[2]: Entering directory `/u-boot-0.4.0/tools/gdb' gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o gdbsend.o gdbsend.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o error.o error.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o remote.o remote.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o serial.o serial.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -o gdbsend gdbsend.o error.o remote.o serial.o gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o gdbcont.o gdbcont.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -o gdbcont gdbcont.o error.o remote.o serial.o gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -c -o astest.o astest.c gcc -Wall -pedantic -O -I/opt/eldk/ppc_82xx/include -I /opt/eldk/ppc_82xx/lib -o astest astest.o error.o -L/opt/eldk/ppc_82xx/lib -L /opt/eldk/ppc_82xx/usr/lib -lbfd -liberty /opt/eldk/ppc_82xx/usr/lib/libbfd.so: could not read symbols: Invalid operation collect2: ld returned 1 exit status make[2]: *** [astest] Error 1 make[2]: Leaving directory `/u-boot-0.4.0/tools/gdb' make[1]: *** [subdirs] Error 1 make[1]: Leaving directory `/u-boot-0.4.0/tools' make: *** [subdirs] Error 1 [root@MPC8266 u-boot-0.4.0]# _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail

2 1

[U-Boot-Users] Using MPC8xx SCC?
by Steven Scholz 31 Jul '03

31 Jul '03

Hi there, I have a display connected to SCC1 and want to display some boot message while the real console for U-Boot and Linux should be SMC1? What would be the best way to do so? Thanks a million, Steven

1 0